MTFCA Forum

Another question for the team, when recharging the magnets on a magneto in the car, do you have to touch each magnet individually or just at the mag post? i’m working on a 1925. I have the hogs head off to inspect the coil rings. Everything looks good but the mags are weak. I was planning on doing the flash charge with a DC welder.
Thank you

IMG_4714.jpeg IMG_4636.jpeg IMG_4713.jpeg IMG_4578.jpeg

After finally getting the engine to run in a friend's newly-purchased '26 T, it was noted that the ammeter did not register a charge even when the engine was revved up. The ammeter was wired backwards (of course!), showing a charge when the lights were tested. Once the ammeter wires were corrected, turning on the headlights gave a discharge on the...

Last year I bought a very original early model year 1914 touring that has a late November 1913 engine. It has some transition parts like a two piece driveshaft and likely the original carburetor that was used for the 1913 model year, a Holley S. The car was in running condition when I got it, but for some reason, I really had a hard time getting...

I recently saw the post about the frame riveting tool that sold on eBay and was curious if anyone has any information about the Stevens T-50 tool? It seems like a very helpful tool for our hobby. There was a picture of it from what looked like it came out of a catalog but most of the text was cut off and couldn't read the whole thing. I would also...

Looking for a 1914 touring in good running condition although I would consider others. I'm located in Michigan. Not interested if it's painted red. Appreciate any help locating one.

Early 1912 engine no. 88211, complete with correct parts including head, pan, tramsnmission cover, pedals, etc.
Purchased from my good friend Tommy Turner a few years back. I recently suffered a downturn putting an end to any major restorations. The assembly has never been removed from the heavy wooden crate used to send it to me. Here is a link...

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. $650.00 plus shipping Lang’s 1-800-872-7871

I have published a Worldwide index of Model T Ford clubs... which will no doubt have some entries missing :D
This index includes the websites of each Club, contact details and addresses where available.
If you know of any that need to be added, please let me know — please ensure you include a website address, physical address and contact...

This shift-lock assembly is in excellent condition with minimal wear in the shift arm and body. The plunger and spring are new. It should work just fine as it is. This isn't the same one I advertised a couple weeks ago. I'd like $250 for it. Please contact me through the forum email system if you are interested. Thanks.
Bryan Ostergren
Ruckstell...

My “good neighbor “ the land developer tried to destroy my property corner post with his water runoff “project “.
So I used an old school patch job.
IMG_5221.jpeg

Have a lowered 1913 Speedster project. Looking for different ways to mount a friction single lever shock to the rear axle.

I will mount the single lever friction shock parallel to the rear frame cross member.
These shocks have no name or markings. The shock has 2 rubber discs between the shock body and the adjustable tension lever. I am wondering...

(SOLD) Springfield tire tool for clincher tires. Adjusting screw is in good condition. Special tire tool with hook to grab edge of clincher rim. Price $125 plus shipping. Tool measures 15-inches in length. Email, call or text (248) 894-75fiveone. Thanks, Walt

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Brass holley g body steel bowl 35$ plus the ride for parts a restore

Iron body holley g for parts or rebuild 50$ pulse the ride

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Cowl gas tank does not leak solder has been touched up round the outlet. Over flow tube is broken off at the outlet Decent looking usable tank $200 plus the ride or local pick up pleasant prairie wisconsin can sell you the straps for an additional 50$

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Bottom Line Up Front:

Our local South Carolina Model T chapter is going to show their T’s to a local college that has an automobile history class (or similar title). Feb 2 or sometime close to that is the date.

Do any of you know of a 5 or 10 minute presentation with PowerPoint slides or pictures that I might be able to download or borrow?...

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.

Only $60 + USPS flat rate small. Another sandblasted recently sold here for $100. All threads used tap or dies already and in good condition.
gwhouse731(at)gmail(dot)com

31 long new horn brass flex tube. 25.00 plus15.00 shipping.

I generally don't recall my dreams, but this morning I woke up like I'd been poked with a cattle prod!
I had recently rebuilt my rear axle. Through all the various test fits setting thrust bearings and gear lash, while I had torqued down the pinion gear, I had left it unpinned intending to do it with final fitment. Generally, I'm always very anal...

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

Completely disassembled and cleaned, new venturi, float, float valve, reconditioned spray needle and spray nozzle, throttle shaft bushings installed, crack free bowl, test run. $365 postpaid to continental USA email: wlkma9@gmail.com

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

I am looking for a Bosch plate distributor. I am also looking for a single wire wheel. I would like it to not be painted up all pretty but more of a rusty patina that can be used on a speedster, to hopefully go fast. Haha.
I am located in Indiana.
Thanks for your help.

Looking for this seat bracket for the passenger side of a 24/25 coupe let me know if you have anything that looks like this thanks.

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

Will a 6 volt alternator putting out 40 amps charge a 8 volt battery...

For Sale are a set of 4 original hood hold downs. 2 have very little wear with factory numbers. Please inspect the photos for the condition of each. SOLD for the set of 4. Lang’s 1-800-872-7871

IMG_7249.png

Hello all during rebuild of the gearbox i discovered the gear casing is cracked at the pin of the triple gear, does someone tried to repair this or does someone has one used for sale and eventually also a set of triple gears

On frozen Lake St. Clair 121 years ago Henry Ford destroyed the world one mile record. He became the first American driving an American made machine to hold the record.

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $140 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale Marquette Mfg Co. clincher tire tool. Tire tool for removing and installing clincher tires. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

1926 Touring, sudden-onset problem of slipping in high, but low and reverse are fine. Peeked inside for clues and found the clutch fingers quite loose. Had the clutch spring broken in service? Careful inspection showed it was intact, but...

After much puzzling I finally noticed that the clutch spring and spring cup were pushed right back the...

IMG_5241.jpeg This is the first time the carb has been off in 30+ years.

It’s an NH

What ‘magic’ was it supposed to do ? ( the coil spring)

Thanks in advance….

March 12-18 in Texas

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Here are a pair of NOS Battery cell tops for the 1925 Rubber case Ford battery. They don’t say Ford on the but came extra with my NOS Ford battery. Taken out of a Ford dealership in the 1960. $30 for the pair + shipping. Email me by forum. Dan
IMG_5149.jpeg

IMG_5150.jpeg
IMG_5151.jpeg

Hello everyone. A very sad day here, Dick Hautzinger passed yesterday. I was very fortunate to know him for quite some time and travel to many swap meets, shows with him. I was always surprised by the amount of people that knew him wherever we traveled. His knowledge of Model T’s was endless.

A wonderful family man and friend to many that will...

Are the brake cam levers for a '26-'27 the same left and right?
I know the cams are different for each side.
Thank you

Thank you Bill C. and Bill A. for this very nice photo of a 1905 side entrance Model C with lots of extras. C 3.tiff

In color:

IMG_2899.jpeg

For Sale is an original Ton Truck Tire Iron supplied by Ford for Ton Truck rear tire changes. SOLD plus shipping Lang’s 1-800-872-7871

For Sale is an original Ford 5Z-196 U-Joint installation tool. It is used to turn the u-joint allowing it to be installed into the back of the engine. SOLD plus shipping Lang’s 1-800-872-7871

Same press as illustrated throughout the Ford Service Manual. Smooth action, no thread wear. Local pick up. $750. Will sell stand with press only. Negotiable. Contact me by email through the website and leave your contact info
Richard Gould
20260112_074942.jpg 20260112_075840.jpg
20240315_112718.jpg
20260112_092541.jpg

For Sale is an original “Icy Hot” Picnic Set with suitcase. There are 4 plates, knives, forks, and spoons. Unfortunately the Thermos is missing. $200.00 plus shipping. Lang’s 1-800-872-7871

The overall height is 14 , 11 diameter and the lens needed looks to be about 9 1/4 . Would work great on a T fire truck. $225 plus shipping.

Hi…..I can’t find a picture of one online, I think that they were made of canvas.

For Sale is an original Ford 5Z-165 Rear axle Pinion Gear Nut T Wrench. SOLD plus Shipping Lang’s 1-800-872-7871

Wanted: One 1915-27 electric headlamp rim in unusable condition. MUST have at least ONE usable bracket on backside with usable tabs. Rest of rim, unimportant, as I will cannibalize rim for one lens bracket. Willing to pay shipping. Contact me through this site's messenger.

For Sale is a well made version of Fords 5Z-323. Original version not included. $20.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a Starter Bendex Head Puller. Marked with a Ford Script and 5Z-323. SOLD plus shipping. Lang’s 1-800-872-7871

The time has come to pass the torch so to speak. I have taught my grandson the methods of babbitt pouring of model T main bearings and the procedure of boring and align reaming the bearings. I have been doing babbitt work for 40 years, but the time has come to share the knowledge with a younger person.

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

“Original” Smith just installed a side-mounted spare on his 1925 roadster pickup. Looks sharp, almost sporting - and really changes the look of the car.

I was in a local IKEA store and noticed they had cocoa floor mats for sale. The mats are perfect for the rear floor of 1910-1916 touring cars and are very reasonably priced. They are large enough so that they can be trimmed and fitted to the floor and look to be durable and nicely made. If you need a correct looking rear mat, this may be the...

Response to my query recently was so bad that I am not planning on many parts, yet there was one fellow who seemed excited about the prospect, so I decided to proceed with a VERY small number of parts (like 4 or 5 each and that's it...)

I finished up a couple and will do the rest in the spring time

If you're interested in either needles or...

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

For Sale, nice looking touring 23- 25 top sockets. $250. Call for more pictures. Steve 701 212 5009

For sale EKERN emergency rear axle fixture. Axle rotates smoothly. Grease cup is filled with synthetic grease for long life. Threads are in good shape. Used as a temporary fix to get you home after an axle break. Price $150. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

For Sale is a dainty toolbox that would be mounted on the running board or body. Hasp is Brass and the box is very solid. There are some extra holes by the hasp as shown in the photos. SOLD plus shipping. Lang’s 1-800-872-7871

It's been 11 years ago that posted looking for information to identify a carburetor. Turned out to be a Wizard or Simmons, no markings on it.

Since then that carburetor has been sitting on the shelf collecting dust. I'm now retired and thought I would take a shot at bringing it back to life.
The two things needed for it are the flapper and the...

Looking to buy 1 or more Weber 1910 wheel dollies. I have 3, looking to fill out the set and more would be great. Look at the pictures. I want a set for my unrestored 1911 open runabout. Thanks, Bob, 507 458 6778.

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

No name. Beautiful brass & glass. No cracks or dents. Has burner. Entire chimney nickel plated brass as is entire font
Beautiful multifaceted glass in rear. Only $110 + the ride.
gwhouse731(at)gmail(dot)com

Pat’ Dec 9, 1908…Original paint and perfect condition. Complete. No cracks in glass or brass. Believe for 1913-1914 Ford. Only $180 + shipping.
gwhouse731(at)gmail(dot)com. First caller gets it

When I was putting the 22 into the garage for the winter, I couldn’t back it up my very low slope driveway. I had a bunch of things to do before I could get into it to find out what was up. I took the transmission cover off today and I can’t see anything wrong. The triple gears look fine, the drum shows no sign of heating or cracking, and what...

SOLD Stevens spindle bushing re-facer. Marked STEVENS NO. T-290 . Threads are in good shape. Price $285. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens drive shaft sleeve puller. All threads are in good condition. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens piston vise. Good threads and jaws (lead). Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens generator gear puller. Good threads. Price $165 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Got this with a car we bought, don't need it, I'm asking $300 it is all there plug and play if you will. interested can text me at three three zero 2four1 two6four 1.

I recently dumped the pan for the first time on my T only to learn that the 'stock' engine I was promised actually has an A crank/ billet mains/ A rods/ and a big cam (you can imagine my surprise!)

Anyway, I think that the logical next thing to to is look into an OHV conversion. I'm too poor for a Rajo so the 1928 Chevy head seems like the...

These are machined from 6061 aluminum and fit the back nut on an aluminum Warford transmission. $60.00 shipped!

You can DM me to purchase or get one at rawaequipped.com

IMG_2719.jpeg IMG_2718.jpeg IMG_2721.jpeg

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

Here are some bell cranks that are Nos. See pictures. &10 each + shipping. Email me by forum. Dan
IMG_5133.jpeg

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

For Sale is an original 1915-early 16 Tail Light, License Plate Bracket in good condition. $60.00 plus shipping. Lang’s 1-800-872-7871

IMG_4789.jpeg IMG_4475.jpeg IMG_4413.jpeg IMG_4492.jpeg

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $110.00 plus shipping. Lang’s 1-800-872-7871

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $25.00 plus shipping. Lang’s 1-800-872-7871

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$135.00 plus shipping. Lang’s 1-800-872-7871

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $1500.00 plus shipping.
Lang’s 1-800-872-7871

For Sale are “Fronty” Script that mounts to the radiator core. Mounting hardware is NOT included. Available in solid brass or stainless. $49.95 plus shipping Lang’s 1-800-872-7871

For Sale is a very nice “Ford Script” Transmission Door for late 1911-1912 tapered transmission cover. It is in excellent condition with no pitting and a very crisp script. It has been glass beaded. $150.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $85.00 plus shipping. Lang’s 1-800-872-7871