MTFCA Forum

I am going to part out my 1913 Roadster project. The body is going to be first to go. Very nice body and top irons/bows. Came from an auction in Ind years ago. $4500 pickup here or at Luray. Email me by forum. Dan
IMG_5236.jpeg
IMG_5253.jpeg
IMG_5242.jpeg
IMG_5244.jpeg

Just finished up a new batch of Stevens Front Axle Repair inserts. Be out for a while. Sorry for taking so long, but life gets on the way. Have both Upper and Lower in stock now.
Upper Tapered inserts $6.50 each
Lower Threaded inserts $8.00 each
All are + shipping.
Email me by forum. Thanks Dan
IMG_0598.jpeg
IMG_2391.jpeg

Here are some Old School style rope type main seals that work good on T engines. One will do a T engine. These are about 6.5” long and 1/2” square. Fits the front seal just right. Fit it in timing cover, trim it and use the rest in pan. I have a good stock of these, but when gone there will be no more. If you want any better get them while you...

What I have for sale is a brand new Texas T Leakless water pump. I do not have the hose. $250 plus shipping of $12.00 in the lower 48 states
Eric Smith.
815 535 1367
1958els@gmail.com
PENDING

Can someone give me a recommendation for a person who can repair a small crack in an exhaust manifold port?
This is a 1909 Part T511. Thanks

See pics. Exhaust Manifold T511 - A.jpg Exhaust Manifold T511 - B.jpg Exhaust Manifold T511 - C.jpg

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Random muffler ends 15$ each plus the ride

Was this a scrap drive or just a wrecking yard over run with T’s getting ready for the scrapper. I think I’ve seen this before but can’t remember where. I’m thinking it’s in the early 40’s or before. Looks like it was few other makes too but not many.

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

First off no brass hubs that being said thinning out 4 milk crates of fan hubs. Aluminum and steel hubs. fans are mostly bad what your buying is the hubs. 10each plus the ride buy a bunch I'll cut you a huge deal. alot of these are getting tossed next scrap load

For sale: Stevens Axle Tool $1500 plus postage
includes frame, 1 reamer/tap, 1 tappered reamer, one set of uppers inserts and one set of lower inserts plus one set mixed inserts
20250901_135117.jpg

I have almost a dozen empty or mostly empty warford cases &100 each + s&h aluminum and iron avaliable i have a few tops and limited gears avalible also

This Heinze coil box came in for lid repair. There was a chunk of wood missing on one side. I also noticed one of the contact springs was loose, then broke off.

During the spring replacement I noticed a lot of corrosion around split rivets that hold the springs (see photo) and wire that carries power to the coils. Measuring the resistance on each...

Here one for you doers out there ruckstell housing had been made into a tractor rear end need new axle tube housing is nice 300$ plus the ride

Another item from the garage with neat, early parts. A Gabriel large three-pipe, outboard exhaust whistle. This is used for mounting above the running board. This is about 40 total length, 7 1/2 tall and the tubes are 1 3/4 in diameter. It has original nickel plated over the brass. It has the original Gabriel tag which is nice and crisp. This...

A four tube Aermore No.0 whistle with a Fulton cutout. The cutout has the double butterfly valve. The cutout body has been welded to make the opening smaller. This can be removed or left as-in. Currently the cutout has approximately 1 1/2 threaded into a 2 1/4 threaded in inlet. Approximately 2 3/4 overall ID original size. Needs a good soaking to...

The Fulton Co. Four Chime Aermore Exhaust Whistle. The tallest chime approximately measuring 21 1/2 tall and a 1 1/4 inlet ID. The top is stamped The Fulton Co. No. 00 Aermore Exhaust Horn . It's dirty but is in very good, original condition. Nice and straight. No damage. Price is 210.00 including shipping in the USA via FedEx Ground. I do not...

Last Chance!
for those wanting an engine rebuilt for this years touring season. We have just enough time to do one more engine and get it back to you before we leave. I’m planning a 5,000 mile trip to AZ and back for the entire month of June. The trip will be filmed and posted to youtube, potential filmed destinations include the AACA museum in...

IMG_5144.jpeg IMG_5110.jpeg IMG_5175.jpeg IMG_5117.jpeg

Just thought some of you would enjoy watching this.

:shock: :shock: :roll: :roll: :lol: :lol:

Rubes Horn For Sale as pictured,

has reed and honks.

$225 plus shipping.

rubes horn.jpg

Very rare Weston Amp and volt gauge for an early electric car. Bakers used them and others. It could have other uses also. It is in very good all original untouched condition. It is untested, $975. I know it should be listed in the horseless carriage list but I cannot do it. Five07 458677eight. NO TEXTING.

Sorry fellas internet has taken a dump!

My 14 Runabout has a taillamp bracket with vertical mounting holes but the vendors show them with horizontal holes. Which is correct? Thanks, Art

For those who don’t know, I am currently employed at a hot rod shop at the age of 17. I do a lot of different varieties of cars from muscle cars to luxury European to full on custom street rods. Well today I got to work on what I believe is a 1914 speedster. At my shop, no one knows much about T’s so I got to run the show on this one. The car...

I am looking for someone who could repair a small crack in the rear exhaust port of a 1909 Part Number T511 Manifold. See attached photos. Please reply to my email or on the forum.

Thanks Daniel Snell Exhaust Manifold T511 - A.jpg Exhaust Manifold T511 - B.jpg Exhaust Manifold T511 - C.jpg

I need a couple of pieces of 1 wide black leather used is fine if its not to dry and hard. Does some one have a old broken front top strap for a 1911-12? Need a 8 and a 16 17 piece if longer that's great . Thanking you in advance for checking and any leads. Dave

Removed mosquitoes.

smoked.jpg

This wheel/star with 6 holes is attached to the original choke arm where the wire goes. What is its purpose? It doesn’t spin, it has raised areas that lock it in place.

MS Test WRT Piston Position.jpg

A pair of original cast brackets for mounting a prestolite tank on the running board. Very good condition US$120 contact me through the forum, thanks, Bill

I did not buy this originally or ever use it, so the condition is unknown. It does not appear to be abused or damaged, but even so sold as For Parts Only . $45 and that includes shipping in the CONUS.

I am looking for a set of rear spring perches for a large drum rearend.

Wanted to buy a two man top does not have to be Ford.
Thanks.
John

Last Chance!
for those wanting an engine rebuilt for this years touring season. We have just enough time to do one more engine and get it back to you before we leave. I’m planning a 5,000 mile trip to AZ and back for the entire month of June. The trip will be filmed and posted to youtube, potential filmed destinations include the AACA museum in...

Does anyone have a good source for nickel or chrome plated brass or steel oval headed (not full round headed but shallow round headed) tubular rivets of various small sizes. Also in stainless steel. Thank you.

Hi All,
Long time lurker, reader, and researcher, first time poster

I've been doing the Model A thing for almost 20 years with a 1928 Phaeton and 1931 CCPU so I thought I had ol' Henry figured out, but the Model T seems to be a different beast.

I am working on a what I thought was a 1923 Model T Roadster (with the wooden pickup bed accessory...

Has anyone ever used one of these? Did the wood float hold up with the ethanol in the gas? IMG_7475.jpeg

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $110 plus $19.30 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $110 + $19.30 postage in lower 48 states ...actual postage outside this area ...Gene...

Babbitt bearing mold for model A Ford mainbearings … this mold will pour both the block and caps in the model A engine … mold pours bearings at 1 1/2 diameter to allow material for finish machining to standard or any reasonable undersize crankshaft sizes … written instructions are included as are my email or phone support … price $175.00 + $19.30...

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $150...

There will be T parts and other pre war stuff at the Duncan Oklahoma swap meet. They added a pre war section last year. Us in the Midwest need to support this to keep a pre war swap meet in the area. I will have a booth and plan on bringing wheels, horns, tools, plates and many other items. Photos coming. Attached is a flyer. I went last year if...

it is getting to be time to start planning our springtime auto. activities ... i spoke with Kevin Hammock this week regarding any changes in the Duncan swapmeet in March ... the only change is BIGGER ... the 2 north buildings are sold out and the building that was under construction last year is completed and will house an additional 100 plus...

Looking to buy a McCord Oiler for a Model S.

I just saw a 26-27 T roadster pickup for sale in Longview, Texas by a salvage yard on Facebook marketplace. Price $2500.00. Ad states no title, no motor or transmission, and I do not see top irons or bows. Picture is not a close up, but it doesn't look like a rust bucket and fenders don't look all bent up.

For sale: Bracket $25 plus postage

20220628_065848.jpg

One complete early differential in excellent condition. Ready to install. Price is $150 plus $18.50 priority flat rate shipping. Mark Chaffin (951)805-0928

20260213_163856.jpg

20260213_164210.jpg

20260213_164222.jpg

Have an NOS 09-25 Watts clutch. Will trade for a 26-27. Or purchase outright or trade for something else you want. I have a lot of stuff.
Please contact me by email thru the forum and leave your contact information.
20260213_193040.jpg

I’m looking into why the magneto isn’t working on my ‘26. I’ve checked the post and it was fine. I just now checked the endplay and it seemed fairly significant to me. It’s an exaggeration, but I would say it’s nearly 1/8”. That’s just a guess. The black book talks about an oversized bearing endcap. Do they still make those? Lang’s only shows a...

This kit is for a 1920 or later Ford Model T and includes all the original Ford Script tools! Here is what is included: T1349 Hub cap wrench, T1387 Adjustable wrench, T1903 Pliers, T1917 Double end wrench, T2335 Cylinder head wrench, T2336 Oil Cloth Tool Roll (reproduction), T2336 Tool Bag (reproduction), T2337 Oil Can (can has slightly bent oil...

Available again is Part # 3004 1909-16 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

I've heard that there is a large collection of early classic cars including some very early Fords in Micminnville, OR. Does anyone know the owner and contact info?

IMG_7464.jpeg

For sale: I have 2 fatman steering wheels. 1st one is a Bauer and the 2nd one is a Spencer. Wood is very good condition. Have not done any cleaning or polishing so you can make it what you want. Have a key for the Spencer. They are $500 each plus postage.
20250821_230246.jpg 20250821_230040.jpg 20250821_230013.jpg 20250821_233019.jpg...

My 27 touring has a crack / bend in the the lower section of the the front bow. Wondering is I should attempt to repair on the car?
I have a lathe so I could cut it off at the break and make a dowel to fit inside, then braze up the joint.
Anybody tried this repair?

1931 Model AA Ford Mail truck. Completely restored using original hardware and plans. Engine was professionally done with extra power. Down draft carb. FS solid state ignition. Updated for safety, hydraulic brakes. stops on a dime. Great oak woodwork. Runs great. Beautiful throughout. $14,800. a fraction of restoration cost. NO TEXTING....

I have a 22 T with a 26/27 Engine & Transmission. Has Ruckstell & large drum RMB installed. Engine starts right up and is strong, but The car has always struggled to move. Low & reverse needed high rpm and often will stall, especially in reverse.

I’ve had the car since 2020, prior owner had it for well over 30 years, spent a lot of time outside...

For sale excellent unrestored, original throughout. Complete and runs excellent. It was in storage for close to 80 years. Never any rust out or dents. Original interior including front floor mat. One of the finest unrestored model T's in existence. The price is $23,500 FIRM, FIRM. NO TEXTING. five0745eight677eight. S. Mn.

I'm having a brain cramp, what book lists the various bolt sizes used on a Model T chassis and body? Thanks, Art

For sale are a pair of sidelight brackets for 1923-25 and 26-27 TT C-cab trucks. $50.00 pr plus shipping. Lang’s 1-800-872-7871

For Sale is an original 1909 - 1912 Touring/Roadster or 1913-14 Roadster Tail Light Bracket $25.00 plus shipping
Lang’s 1-800-872-7871

For Sale is a nice Ford 5Z-212 Wrench used to hold the body mounting bolts from turning. $50.00 plus shipping Lang’s 1-800-872-7871

I have 4 headlamp sockets for 1915 or 1916 Model T’s. These differ from the later ones in that the pins are 90 degrees off. This was done to align the filament horizontally to allow the headlamp to be focused. Note the later socket in the middle of the picture. The focus screw for the 1915/16 is at the top of the light bulb, not to the side of the...

This jack handle T2344 fits a ratchet type T2343 Ajax or Walker jack. $25 and $10 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

I have a set of 4 new KW points available - photo coming later today - $65 includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Hi everyone,
Just completed going through the entire Ruckstell in a ,26 Tudor that also has a Warford transmission. Having both I thought it a good idea to install the hydraulic disc brakes which I just finished today. Got everything put back together and started the engine to make sure the Warford shifted correctly which it did, however I could...

Several lots (#11-15) of left over parts from the improved Coupe project:

screws 11-15.jpg

Set of (6) Transmission inspection cover SCREWS for added oil lint filter, 1/8 longer.
Zinc Round head, slot drive, machine screw 5/16-18 x 1/2 . Lot $0.50

As-is, no warranty.
UPS or USPS shipping (no FedEx).
A. Please claim BELOW that you want a set...

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

This large Rubes 3/4 twist horn is about 10 tall and is about 6 wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40 long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished....

Cab anyone with a hempy cooper line boring set up take some measurements and pictures of the cutters for me mine are missing

For Sale Dodge Bros. spare tire carrier with four lug nuts. 3-7/8 inches between studs. Will need re-drilling for speedster. Price $275 plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

Doing a full rebuild on my 22 centerdoor engine. Everything shows minimal wear so i ordered standard adjustable lifters. The problem is they wont go into the block. They seem to be one or two thousandths too big. Suggestions? Is there a reamer out there that would work for this?

For Sale: a 1914 original manual.

$112 a dollar per year since printed plus USPS mail.

For Sale is a nice 1910 - 1913 2 piece driveshaft housing, no bump spool, ball and collar. $600.00 plus shipping Lang’s 1-800-872-7871

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $30.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a reproduction Lucas Engineering Aermore Exhaust Whistle. $185.00 plus shipping. Lang’s 1-800-872-7871.

For Sale is an older “New” set of .100 oversize Pistons with pins. $100.00 set plus shipping. Lang’s 1-800-872-7871

For Sale is an original 1914 “Rubes” all brass Horn. There are 3 dents that won’t shown when mounted. $110.00 plus shipping. Lang’s 1-800-872-7871

Available again is Part # 3004B 1917-1925 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

IMG_0096.jpeg For sale are 4 new blockley tires and tubes mounted on new rims. I bought these about 4 years ago intending to use them on a project that fell through. They are mounted on brand new rims from Australia and I only put enough air in the tubes to mount them. Never were fully inflated. If you can use them, they will need to be picked up...

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $160. plus shipping. Call or text...

For sale 15-1/4 inch OD steering wheel. Steering wheel is marked Dodge Bros. twice, around each keyway. Price $250. plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale brass 15-inch OD steering wheel with new brass nut. Single keyway repro. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Completely disassembled and cleaned, new float, float valve, venturi, and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

Some years back RV Anderson reproduced a Watts style clutch. The price of the original material skyrocket and he used a ditterent material and asked some who purchased the kit to critique it. I have a 26-27 set up but am reluctant to install it fearing it wont work well. If anyone has experience with this clutch, good or bad, I'd like to hear from...

Do you guys have a source for 21 tires other than Lang's or Snyders? Just curios if I'm missing something. I'm pretty happy with the results of my wheels and I just can't bring myself to put the old whitewalls back on. I have Kelsey split rims and only 1 of them is good. I saw a guy sell his rims and tires here but missed it dang it ;-)

Just...

Ford script T-2839 Wire wheel lug nut wrench. This is the original wrench supplied by Ford when you got wire wheels. $75 and $15 shipping. Email me at markpaulagember AT aol dot com

How about a nice set of 1926 Michigan license plates for your car. These can be registered and run as original plates. These were redone by Duane Wells many years ago. $125 and $15 shipping. Email me at markpaulagember AT aol dot com