MTFCA Forum

Here is another batch of extra stuff that I have accumulated but have no current need for. If you are interested in any of the items, feel free to PM or email me with your shipping address and a reasonable offer that at least covers the cost of shipping.

Item A is an empty leather tool roll that I bought for the Flanders tools, but it doesn't fit...

Folks - Only 8 weeks until the Mid Atlantic Prewar Swap Meet in Beautiful Luray, Virginia! We currently have almost 80 vendor sites sold which beats our all time high record for our spring meet - and we are closing in on the attendance we experienced at our one-time-only fall meet.

Use this thread to post what you will be bringing to sell ....

So was out driving my 23 tourer , was down at sea level and to get home I had a long uphill climb , car started off well got a good race at the hill but getting near the top the car was struggling , into low gear then higher reves to get over the top . Should I be screwing out the meddle in the carb to help me up the hill an then screw in a bit on...

00 Tue Safety with Subtlety 1 the purchase.jpg

This will be a 10-part series with an an additional chapter each day, keeping within this thread. It's mostly about safety modifications made to my Model T. I hope you'll find it worthwhile or maybe just entertaining.

There are two primary levels of participation in the antique car hobby On one...

Are the NH carbs all the same from 20 - 26 ? I’m looking for one for my 26 coupe and I thought the later ones (26-27) were slightly different......em I thinking correctly?
Anyone have a decent core they would sell?
Thanks in advance

Good morning everyone. Hope you all are doing well. This week’s Sunday Swap Meet offerings are all good used original items. Description and prices are as indicated below. In most cases, USPO Flat Rate shipping will be an additional $8.50, unless stated otherwise. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951)...

Interesting delivery body I came across on EBay. I’ve seen the rear door mechanism/latch before on other delivery bodies before. I have no connection to the seller

Come sell or buy at a great event !

You must be a dues paying member of
The Early Ford V-8 Foundation Museum
to vend at the swap meet.

FJ

61BB69C0-A62F-4590-AA9D-4DDF8FFDD178.jpeg

81ECAEB2-83B4-4422-89AC-39BE5918FBB8.jpeg

Yes it look's real easy on the several you-hou videos, the muscles in the middle of my back are still sore and I did this monday. That was probably the hardest thing I had to do to this T. After the cover was on it was real fun to line up all those bolt holes.

Lowering the cover and trying to keep the darned clutch release ring from rolling...

Williams bros. Aircraft corporation accelerator pedal for holley model. Just found it on the shelf. 40.00 plus shipping IMG_20210421_100952970.jpg IMG_20210421_100846745.jpg IMG_20210421_100822550.jpg IMG_20210421_100826390.jpg

Any thoughts on whether a 2021 Ohio Jamboree of T's will take place???

First off, I cannot believe this nice FORD script nickel plated barrel, Bridgeport tire pump is still here. Talk to me! As for the rest, take a good look. These are all original meters, not 1950s and later reproductions. The gargoyle is the only thing new. Glad to mix and match, separate from the display caps, etc. I am also glad to describe any...

Does anyone know when Ford went from the one piece dust ring held on with a screw in front of the terminal stud to the split type held with a bolt and nut? McCalley's book shows a generator on page 277 with the early setup. The stud is not attached to the buss bar like the later ones. Pictures don't want to post today!

Saw this in a video on youtube, looks like a few levers or keyboard thing? Video never mentioned it.

so... whatzit?

175196176_10119384949772084_7911396783133350720_n.jpg 173893175_10119384949577474_1467281962443365801_n.jpg 174124835_10119384949846934_7723486759008432243_n.jpg

Here's a long shot, but I'll give it a try. Title pretty much says it all. I'm looking for the brass, (or possibly aluminum), I.D. plate that rivets to the back of a Smith Form-A-Truck frame. Anybody have one laying around?? Let me know what you find. If anybody made reproductions, that would be fine. Kind Regards, Bill Bennett (559) nine six...

Need good short block or source to rebuild my 1925 engine.

WTB like the photo.
Brian.

Were these plugs used for military? or some other application ?
the 2nd is a timer part >>>>
thanks for the help, Bob

So Angie just took her first ASVAB Test. All the kids take it in JROTC. She told me she was glad she had a mask on because she was laughing at the automotive section. They asked questions like Identifying what type of fluid under a car could be red? What tool was a feeler gauge (she had to pick) and what you use to clean up threads on a bolt? She...

WTB original or good reliable (not repro) ammeter for 26-27 large switch plate.20210421_142328.jpg

Offered for sale is this 1913 Model T Touring. The body is a Rootlieb reproduction manufacture twenty-five years ago. The body is no longer being produced as the craftsman who built it passed away several years ago. The fenders, running boards, splash aprons, hood and hood former were also manufactured by Rootlieb. The radiator is original as are...

New old stock plugs on ebay. Not mine, but look good. Price seems reasonable.

1500.00 plus shipping . In mt. Vernon in. Other body parts available IMG_20210421_115818641.jpg IMG_20210421_115513170.jpg IMG_20210421_115519177.jpg IMG_20210421_115530414_HDR.jpg

Good afternoon all.

I just bought a pair of Canadian Ts eh? One is a late 27 car with engine No. C-749243. This would put it after July. Possible this is a replacement engine? or extremely late 27? I have not seen the frame number yet, when the car arrives i will go looking for it (I dont know much about Canadian Model Ts i assume they also have...

Well, I wonder what the pacifist side of Henry would think of this?

1.jpg

2.jpg

3.jpg

Two of them are made by fulton. I can't read the other. 10.00 each plus shipping IMG_20210421_102716098.jpg IMG_20210421_102724803.jpg

i have several sets of -.020 and standard diameter re-conditioned Model T connecting rods ... these are from the same batch of old stock rods that i listed several weeks ago , these are obsolete inventory from a long ago closed auto parts store ... i do not know the re-builder , but the rods appear to be of very high quality ,they are X grooved...

OK so my engine is in and the motor mounts are bolted as well as the front. My Radius Rod needs to go back about an inch. Someone recommended jacking up the rod and it should pop in. I tried and that didn't work. These are the same parts going back together. Is there a way to shift the front end back as well? I don't like to force things. Any...

I just picked up a truck load of parts. Most is '19 - '27. if you see something in the pics I can bring it to Luray. I will be sorting through this stuff and listing some on here. Darryl

Anyone have a Seng Steering Wheel that could let me know how to get the horn ring working? I'm pretty sure I have a missing part that is right below the wheel that contacts the horn ring.. There has to be a sliding part that contacts the ring on the wheel.

It's a pretty neat after market wheel. The anti-theft part works great. On and off with...

WTB - NOS Babbitt drive shaft bushing

I though I bought one from Bob's some time back, but darn if I can find it now. I know I have it...just not where! It is now part of my future estate sale, so if you outlive me, be sure to look for it.

Anyone have one they'd sell?

I wired my 26TT according to Ron Patterson's diagram. It is 6v negative ground with a voltage regulator. It is not running yet but when I turn on the lights the ammeter pegs to the right (charge). What do I do?

WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg

A well made set of rear axle bearings. Looks like everything needed here. Short on good Hyatt’s ? Here ya go. $260 OBO ppd to your door. ( check the catalog price). Tmorsher@icloud.com to reach me. Thanks! 1462A9D7-F832-4550-BC67-9EFE34280F90.jpeg

WTB 1927 Closed Closed Car 419 447 5254

1925 TT C Cab Dump Truck Runs Drives For Sale $12,000 OBO Original except truck bed NO rust Spare tire and rim, Jack , Crank for Dump Needs Cloth Roof replaced and seats recovered. I believe that everything else is original. Other than lanterns on side of Cab

[size=1 Kingston Carb L4.JPG Kingston Carb L4 A.JPG Kingston Carb L4 B.JPG Kingston Carb L4 C.JPG 50]FS Kingston Carb L4. Asking 75$ or BO plus shipping.

So I have heard about a car, called a stuts bearcat, that is this?

Can anyone measure the rear seat spring for a 21 touring for me please. The used spring I bought seems too big and after upholstery it does not want to fit. It is about an inch too much forward. It fit without upholstery. The parts books don’t have the measurements.

Would anyone have the right spring for sale?
Frank

I want to mount a small tool box onto the running board of my 1912 Flanders, but I don't want to drill any holes in the running board. Does anyone have a pair of luggage rack brackets or an otherwise trashed luggage rack that I can cannibalize for the brackets? I hate to buy and cut up a perfectly good, complete luggage rack.

I planned to have the frame/axles/wheels blast cleaned and then brush paint them using Rust-Oleum primer and Rust-Oleum black gloss. However, I now am considering having them powder coated. I would appreciate members commenting on these two options.

DSCN2852.JPG I have 2 buffalo wire wheels good shape (tire on one is 30 x 3 1/2 ) are these worth anything? they look good enough to use...look solid....need blasting to make really nice... DSCN2852.JPG

Here is a nice pair of 14 windshield hinges. Have been taken apart, blasted, primed and assembled. Some pitting on back of one, see pictures. All parts are there except the split pins to lock nuts. Nobody is reproducing these that I know of. $85.00 + shipping. Email me at address in pictures. Thanks Dan
A45BD5C8-3F10-4B38-BE7B-4F09C022C845.jpeg...

Here is a nice pair of 14 windshield braces. Been blasted and primed. Not pitted, should make a nice set. $120.00 + shipping. Email me at address in pictures. Thanks Dan
0E8BBB97-39D3-4F35-9273-1C1CE35C0B53.jpeg
57A77D32-3F2C-4757-AF78-5F6C64321F4B.jpeg
83CBE93A-5531-4E83-903B-639254C6B98D.jpeg
0CB14FAF-D95B-4882-A7F0-903FB4D19F3B.jpeg

Just finished a new batch of Stevens Front Axle Inserts. Top insert and bottom inserts. Sorry but there is a price increase, not my doing stuff just goes up.
Upper inserts $3.75 each. Tapered
Bottom inserts $5.75 each Threaded

Email me at address in pictures. Thanks Dan
51CE4E71-A19E-4407-946D-4AD533FEE6A1.jpeg...

Evening all,

I have 2 of these, in the same condition, and only need one. So this one has to go. A nice Solar gas spotlight. It has the original :lens: but has a crack as seen. NO reflector or burner unfortunately (mine too is missing). Otherwise in nice shape, with a lot of flaking paint.
No lower mount, and Id really like to see what one...

What makes a loud POP that sends sparks flying? Sometimes it happens, and sometimes it doesn't, and I'm not aware of what I'm doing differently.

I had my transmission out about 15 years ago at which time I replaced all of the bushings, new bands and maybe clutch disks (can't remember). Anyway I took the cover off today to adjust bands and decided to just check things over. This is an improved T with the driving plate that fits inside the drum. The first thing I noticed was that the screws...

Guess our national leaders didn't expect this. On Thursday, Darrell Scott, the father of Rachel Scott, a victim of the Columbine High School shootings in Littleton , Colorado , was invited to address the House Judiciary Committee's subcommittee. What he said to our national leaders during this special session of Congress was painfully truthful....

87C89E50-A5D2-41A1-82E7-730DAA9B8716.jpeg DB3C160F-064D-4ADC-ACF2-770B324B5831.jpeg C5185354-9A0B-41BA-BC72-30063B0DE4F2.jpeg 3F260728-9932-4572-8667-2A610E2339BD.jpeg

Amazing, quirky, Rube Goldbergish, here is one that people will remember. I believe Jay featured one of these in his amazing accessories posts. This example, I do not believe was ever mounted on a car. There is a bracket on Jays that was used to mount to a windshield frame. For a closed car or truck, that wouldn’t be needed. I’m thinking $850 for...

this is my home rebuilders special ... i re-babbitt and linebore the mainbearings in your COMPLETLY disassembled Model T motor block ... this is for standard configuration mainbearings , crankshafts and caps only ... the customer is responsible for determining the suitability of the motor block ,crankshaft , caps and bolts ... i recommend that the...

What’s the best way to trailer a Tudor Sedan on a open trailer? Frontward or backwards?

Sold, Thanks Dan. It’s heading out your direction. SaoLD. This is a really nice Chicago transmission. These are under, direct and overdrive and are very well thought of. Just check out Clayton Paddington schooling Jay Leno utube video. This one has beautiful gears, bearings, and no known issues. Comes with an original support bracket. I believe it...

No date or location on this one, but it's such a nice photo I reckoned you fellers would enjoy seeing it ! :D

Did some horse trading with my dad. What's the wrench for? PXL_20210419_204315599.jpg PXL_20210419_204324515.jpg PXL_20210419_203337840.jpg PXL_20210419_203320977.jpg

Has any Forum member purchased this mirror?
If so, I'd like to know how well it works.
Is there something better out there for a 1913 Ford Touring?

Thank you,
Gene

For sale : Rebabbitted Model T main bearing sets , laminated shim set and timesaver lapping compound ... re-babbitted using tin base automotive high speed babbitt (SAE#2 Government Genuine alloy )... will supply caps bored to Standard diameter or customer specified dimension ... price of $145.00 includes postage in lower 48 states ... actual...

FS 1909-1912 Cast Aluminum hood handles new repro never used. $20 plus shipping.

Hood Handle 1911.JPG

ISO new or like new door hinge pins for my 26 coupe.
Thanks in advance.
920-808-three 38 one
Myersair@yahoo.com

Hello everyone, it’s been many years since I’ve been here....

My ‘24 touring car has been collecting dust for awhile, and I’m thinking about getting her back on the road for the summer. I’d like to get a new top for her, it’s looking kind of ratty.

Two questions:

Which kit is recommended, and is there anyone in the downstate NY area (Hudson...

Looking for well used aux brakes, need to fit a late rear end. Preferably inexpensive compared to new ones.

LAST ONE SOLD. We had these made for several years now, and recently lost yet another foundry. SO, no plans right now to do more. I had 3 left from the last batch and now down to the last one.raw aluminum casting, very well done. If you own or hope to own one of these great pre-model T Ford cars, it would be smart to snag this. The originals often...

I have a good friend that asked me to help him get a vehicle home. He is 79 years old in body but a kid at heart. He has helped my many times at a moments notice including helping with my new shop. I said yes before I knew what or where. When he said we were taking the dozer to get to it and get it out of the woods I was all in. Then he tells me...

Is any shop project ever really done ? Nope.Still got to install more floor tie downs and a winch and mount for it.
BUT so you folks won't think I have curled up in a Lazy Boy and become a key board Curmudgen, here is what I have been working on for hauling the T pickup.
I built this from scratch. I had the basic frame put together,no ramp or...

I have this model T era chassis for sale. It will make a dandy chassis or can be easily modified to suit your needs. Shown is some forged side bed irons, I believe I have another set just like this, so 4 total, I’d be glad to include some T radius rods, extra side T frame channels, and even a decent front axle, if desired. I love the repurpose of...

For anyone who has stopped at Pioneer Village in Minden, Nebraska, you may have seen this custom bodied Model K:

55C9FC62-6C3A-4D17-8654-150A4F10EEAE.jpeg

91CD3606-2183-474D-846D-75F974DAB899.jpeg

This Model K has a history back to the 1950's. It was owned by Nelson Hollywood, a well known collector at the time:...

SDC18609.JPG SDC18607.JPG For Sale Nice Old Ignition Switch with Two Number 73 keys and amp meter asking $80.00 with free shipping to U.S.A call Matt 503-824-2681

Wondering if anyone from Georgia will be attending the Luray swap next month. As luck would have it, that is the weekend my in-laws are coming to visit so I can't make it.

I am looking for 3 stock wire wheels in REALLY good condition for my '26 pickup - I picked up 2 this weekend and they of course wound up being for Model A's. (If someone in...

I still have still not found any other old car owners in Klamath Falls area but that has not stopped me from having little tours of my own. A couple of weekends ago I set out to circumnavigate Stukel Mountain by Model T. Stukel towers some 2000' above the Klamath Basin floor and can be seen anywhere in the area. The picture was taken from my front...

Here is a dandy. An original model T era bed, to convert your runabout( or cut-off touring) into a pickemup truck. It’s the real deal, note the shape of where it tucks up against the body. Amazing condition, beautiful solid wood and iron hardware. I think $650 is a fair deal, but I’m all ears. I’m not using it, and would like to see it go to a...

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders running engine and a workable transmission. I would prefer 1916 and above but would consider older. Also would like to find one in the upper midwest.

WTB steering arm with ball socket attachment for 26 TT.

1931 Ford Model A

-Rebuilt transmission, rebuilt rear-end, good brakes
-Turn signals and brake lights work well
-Small paint flaw on passenger’s front fender and on engine hood (undetectable from 10’ away)
-Speedometer does not work

Handles great, rides smooth, cruises comfortably at 40-45mph, just about as cute as it gets

Message or email for...

I drive my T's a lot. Yesterday. after a short drive, I left my 1915 touring idling running on magneto while I ran in the house for no more than two minutes. When I came out, smoke was pouring out of the coil box. I shut her down and removed the coil box lid and found the number one coil had tar bubbling out of it. I'm guessing it shorted out? I...

I am looking for a rolling chassis for a project of building a pie wagon. I am looking for a chassis that has the fenders, running engine and workable transmission. I would prefer 1916 or newer but would consider older. Also would like to find one in the upper midwest.

This may seem like an OT thread at the beginning but it is Model T related at the end.

When I was in the Marines, in the Fleet Marine Force, we spent a lot of evening time polishing brass belt buckles for the next morning’s inspection. In 1974, I was selected for Embassy duty, AKA MSG Duty (Marine Security Guard). Basically, we were on loan to...

JUNE 19TH MODEL T HOMECOMING IN RICHMOND, IN. TOURS, CAR SHOW, SWAP MEET, SEMINARS, AND MORE. REGISTER TODAY TO RESERVE YOUR SWAP MEET SPACE!

These are just about 100 years old now. We find them, we buy them, we take them apart, clean,oil,regulate. We polish or nickel plate the case and stem. Choice of 5 different faces. We assemble in your choice of dull nickel, then polished, or in polished brass. New clear lens, delivered to your door, $85 for brass case , $95 for nickel case.
A...

I'm taking off the trunk and mounting the pickup box on my 1925 roadster. Does anyone have instructions, sketches, or images so I do it right?

Evening all,

Here is a single 1914 sidelamp bracket that is surplus to my needs. Some pitting as seen.

Asking $15 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on...

Evening all,

Found a few more parts in the barn to get rid of. I found this 1914 complete windshield setup I do not need. Its in nice shape, I unfolded it for the pics, so the hinges arent frozen. Has both original support rods in great shape, not bent or twisted. The original brass channel is there, but part of one half is bad as seen in the...