MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 280 matches

Topics

Replies

Views

Last post

Model T Radiators

Last post by kmatt2 « Sun Aug 07, 2022 11:12 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Unprr » Sun Aug 07, 2022 9:13 pm » in General Discussion Forum (started 2019)

First post

I’m looking to replace my low style radiator but can’t believe the wait time. Has anyone found a faster provider.
George

Last post

Have you tried Snyders, their online catalog doesn’t show low radiators out of stock. I was able to buy a low round tube from them a few months ago and got it in California in about a week.

6 Replies

138 Views

Last post by kmatt2
Sun Aug 07, 2022 11:12 pm
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by TXGOAT2 « Sun Aug 07, 2022 11:10 pm
Posted in OT - Off topic
Replies: 3581
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

32

33

34

35

36
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

A effective medicinal product was developed containing bakelite syrup, sulphurated molasses, and colloidial bismuth. The blended ingredients were dispensed into vats of hot cod liver oil, which process yielded grape-sized orbs resembling hard candy, except for the flavor. Children would eagerly choose boiled spinach over the candy if offered the...
3581 Replies

608676 Views

Last post by TXGOAT2
Sun Aug 07, 2022 11:10 pm
Model T Manley Wrecker Boom Project For Sale

Last post by Burlingtontguy « Sun Aug 07, 2022 10:42 pm
Posted in Classifieds - Parts
Replies: 6
by Burlingtontguy » Mon Mar 21, 2022 8:58 pm » in Classifieds - Parts

First post

i have a 1923 model t chassis with a Wooden Cab and a Hand Crank Manley Wrecker Boom for sale, I will sell all of the wrecker as one piece or part of the components, Just the Cab ,Or Just the Wrecker boom, or just the chassis, your call, I need to Down size my estate at this time, give me a call to discuss the T . thanks, Dennis 401-932-3191...

Last post

Back to the top to sell

6 Replies

1412 Views

Last post by Burlingtontguy
Sun Aug 07, 2022 10:42 pm
For Sale 49 year old collection of "T" parts

Last post by Burlingtontguy « Sun Aug 07, 2022 10:41 pm
Posted in Classifieds - Parts
Replies: 75
by Burlingtontguy » Thu Oct 15, 2020 12:33 pm » in Classifieds - Parts

First post

I still have a large collection of T parts for sale : Engines, Frames, Rear axles, Front axles, springs front and rear,enough parts to put 5 speedster chassis together and more, some sheet metal ,, Send me an e-mail or call me at 401-932-3191 with your needs... It all has to go 3 barns full, Thanks, Dennis,,,,Located in Connecticut come on down...

Last post

Back to the top

75 Replies

11489 Views

Last post by Burlingtontguy
Sun Aug 07, 2022 10:41 pm
27 Coupe door glass install

Last post by BLB27 « Sun Aug 07, 2022 10:40 pm
Posted in General Discussion Forum (started 2019)
Replies: 9
by JoeG48 » Mon Jun 20, 2022 1:58 pm » in General Discussion Forum (started 2019)

First post

I am installing door window glass in my 27 Coupe. I can't seem to attach the bottom metal channel to the glass (on the door glass ) with out it falling off after moving the window up and down a couple times. --- does anyone now a way to attach the metal channel, and stop this from happening ... I have tried the window setting tape, it is not a...

Last post

Joe, What did you finally do to get the glass into the metal bottom channel?

9 Replies

440 Views

Last post by BLB27
Sun Aug 07, 2022 10:40 pm
F-S 1923 Model T TT Ford Dump Truck been in family since 1969

Last post by FATMAN « Sun Aug 07, 2022 10:03 pm
Posted in Classifieds - Vehicles
Replies: 3
by FATMAN » Sun Aug 07, 2022 11:57 am » in Classifieds - Vehicles

First post

This is a very cool truck
has the cool type of hoist for the dump. the family owned it since 1969 and was a driver, parades, trips to town and fairs, the owner parked it in 2000 when his wife became ill, then he became ill and it sat. the family sold me this plus another chassis from the estate, clear title with truck
I do not know the brand of...

Last post

No not yet but it does have an auxiliary transmission, will look in the morning, to see which one, Bob

3 Replies

210 Views

Last post by FATMAN
Sun Aug 07, 2022 10:03 pm
1913 touring side curtains ?

Last post by Wkndead « Sun Aug 07, 2022 9:47 pm
Posted in Classifieds - Parts
Replies: 2
by Wkndead » Fri Aug 05, 2022 2:24 pm » in Classifieds - Parts

First post

I got these in a lot. I was told from the person I got these from they were on his 1913 that he had sold many years ago. But have no clue which body maker they fit. The curtains are very flexible including the isinglass. Has what looks like road tar splash in places not sure. Isinglass has not yellowed. Dealers get big bucks for these and you...

Last post

Sold to Eric

2 Replies

243 Views

Last post by Wkndead
Sun Aug 07, 2022 9:47 pm
More Model K video in Paynesville MN

Last post by Rob « Sun Aug 07, 2022 9:36 pm
Posted in General Discussion Forum (started 2019)

by Rob » Sun Aug 07, 2022 9:36 pm » in General Discussion Forum (started 2019)

Mike Spencer shot most of this, including a selfie of him in the rumble seat at 50+ mph:

0 Replies

54 Views

Last post by Rob
Sun Aug 07, 2022 9:36 pm
Anyone ever see a 3 tiered E&J taillight

Last post by JTT3 « Sun Aug 07, 2022 9:14 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by JTT3 » Sun Aug 07, 2022 12:23 pm » in General Discussion Forum (started 2019)

First post

I sort of collect lamps and was looking on Tbay & saw these. I realize they are reproduction & the flair on the side lamps are not correct for an 09 but they are beautiful. The taillight though did catch my attention, I’ve never seen an original 3 tiered taillight correctly sized as the sidelights. Did originals exist? Best John

Last post

Kim I absolutely love the patent pending E&J’s the solid jewel with no facets are wonderful. My left and right sidelights have different colored non faceted, blue & red jewels respectively. Peter can you tell if it’s an original or something else. It really looks good.
Thanks for the feedback forum, best John

5 Replies

277 Views

Last post by JTT3
Sun Aug 07, 2022 9:14 pm
What year Ford do you want?

Last post by JTT3 « Sun Aug 07, 2022 9:04 pm
Posted in General Discussion Forum (started 2019)
Replies: 55
by Been Here Before » Tue Aug 02, 2022 8:13 pm » in General Discussion Forum (started 2019)

First post

This discussion as to whether or not a car sold was a 1910 Model T is not needed. All Model T's look alike, and Henry knew this. Henry's solution to distinguishing a 1909 from a 1920 was by tracking the production number. And he wanted to make certain that every one was getting the year car they wanted by the number stamped on the motor block.

He...

Last post

I believe there is a number 22 (I think that’s the number, I know for certain it was a 2 digit though) located in Tx. I have seen the rolling chassis & power train. I cannot tell you anything about the body because I did not see it but it appears authentic with no evidence of any changes. I looked very closely for everything I could think of. It...

55 Replies

1632 Views

Last post by JTT3
Sun Aug 07, 2022 9:04 pm
Toledo tour

Last post by TWrenn « Sun Aug 07, 2022 8:36 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by TWrenn » Sat Aug 06, 2022 10:09 pm » in General Discussion Forum (started 2019)

First post

Members of our local club were invited to join some members of the Maumee Valley T's club today to join them on a great tour from the Genoa area into Toledo to a neat antique fire house museum. It was a great ride, a very nice museum with a 1919 Chemical truck plus other vintage fire apparatus. Then we crossed the street, down a bit, to a neat...

Last post

Well the last stament was to say happy as a CLAM ! Dang this auto correct! :lol:

5 Replies

267 Views

Last post by TWrenn
Sun Aug 07, 2022 8:36 pm
Cleaning up some timers

Last post by RajoRacer « Sun Aug 07, 2022 8:34 pm
Posted in General Discussion Forum (started 2019)
Replies: 9
by Will_Vanderburg » Sun Aug 07, 2022 5:09 pm » in General Discussion Forum (started 2019)

First post

Got some USED TIMERS in the mail. The contact rings look serviceable. I might get some rollers and test them out.

Second timer on the right I attempted to polish. Both looked like the last picture when I started

Last post

Those are Tiger timers - if the insulator ring is a dark maroon, those would be era - if the insulator is more orange, that would be a more recent repro.

9 Replies

221 Views

Last post by RajoRacer
Sun Aug 07, 2022 8:34 pm
Finally found a screw driver for my TT

Last post by Will_Vanderburg « Sun Aug 07, 2022 7:56 pm
Posted in General Discussion Forum (started 2019)
Replies: 9
by JunkyJud » Sat Aug 06, 2022 9:52 pm » in General Discussion Forum (started 2019)

First post

I've looked for quite a while for a correct screw driver for my TT. I found one today at a steam and gas engine show for $8.00.

Is there any record of years when this was provided in the tool kit?

Screw driver.jpg

Last post

If it’s like my 6 buck Hershey find, the shaft goes all the way to the end of the handle.

9 Replies

492 Views

Last post by Will_Vanderburg
Sun Aug 07, 2022 7:56 pm
Historic Fords with numbers for years 1914-1918.

Last post by Been Here Before « Sun Aug 07, 2022 7:53 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by Been Here Before » Sat Aug 06, 2022 1:23 pm » in General Discussion Forum (started 2019)

First post

Every once and awhile there is a discussion about some one wanting to construct a military related Ford replica of World War I.

If any one is willing to take the time, the Congressional Record related to the years 1914-1918 ( and the years before 1925) that discuss the Army Quartermaster, etal, supplies and surplus, will often find Ford related...

Last post

ford-1915lightpatrolvehicle-mvpa-2018-107w-1.jpg

ford-1915lightpatrolvehicle-mvpa-2018-107w-2.jpg

modelt-usmc-2021-107w-1.jpg

1 Replies

227 Views

Last post by Been Here Before
Sun Aug 07, 2022 7:53 pm
What is that for?

Last post by FundyTides « Sun Aug 07, 2022 7:27 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by Vonau » Sun Aug 07, 2022 12:19 pm » in General Discussion Forum (started 2019)

First post

Hi

My Touring 1926 made in Canada has two green buttons on the front. I have already seen this on other Model T pictures. What are these good for?

Were they perhaps reflectors that no longer reflect?

Greetings to all

Last post

In the Ford Price List of Parts, issued Aug 5, 1928, part 3665 Front license clip was listed with the note that it was used on the headlamp tie rod . They are available from Mac's and probably other T suppliers. The reflector was just an aftermarket item replacing the bolt and nut in the original brackets. They are also available from most...

7 Replies

331 Views

Last post by FundyTides
Sun Aug 07, 2022 7:27 pm
Fs wire wheels and hubs

Last post by Pizman « Sun Aug 07, 2022 7:17 pm
Posted in Classifieds - Parts
Replies: 4
by Bjerm » Sun Jul 31, 2022 10:52 am » in Classifieds - Parts

First post

Five wire wheels with hubs $1000 plus shipping or pick up best way to reach me is by email Bjerm10@gmail.com

Last post

Arghh, why didn’t I see this, just payed over $1550 cdn and drove 3000kms to pick up a set. And these look to be in better shape.

4 Replies

522 Views

Last post by Pizman
Sun Aug 07, 2022 7:17 pm
Loose axle nuts

Last post by speedytinc « Sun Aug 07, 2022 6:16 pm
Posted in General Discussion Forum (started 2019)
Replies: 11
by Oldav8tor » Sat Aug 06, 2022 10:20 pm » in General Discussion Forum (started 2019)

First post

Recently I've helped a number of our club's new Model T owners with assessing the mechanical condition of their purchases. One common problem we found were rear axles that needed replacement - most damaged by the axle nut not being tight enough. Cracks radiating from the key slot, worn slots, corrosion / damage on the taper, etc., were the most...

Last post

A little more to the story.... our club has been having T-Parties where we gather at a members house to do some work on their car and educate them. Like I said, we have a number of guys brand new to Model T's. I went to demonstrate a hub puller on a newly-purchased roadster and the wheel came off while I was turning the puller on. The key slot was...

11 Replies

456 Views

Last post by speedytinc
Sun Aug 07, 2022 6:16 pm
1909 T with Mother in law FS on Facebook

Last post by Jerry VanOoteghem « Sun Aug 07, 2022 6:16 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Tbird » Sat Aug 06, 2022 9:36 pm » in General Discussion Forum (started 2019)

First post

Guys I just saw a 1909 T listed on Facebook in the Model T Ford Club of Facebook.
Open valve engine, one piece 7 rivet pan, square hogs head, early rear axle. $29,500
I have no relation to the seller.

Last post

Finally! A T with enough headroom for me!

6 Replies

445 Views

Last post by Jerry VanOoteghem
Sun Aug 07, 2022 6:16 pm
Ammeter issue

Last post by paulmikeska « Sun Aug 07, 2022 6:01 pm
Posted in General Discussion Forum (started 2019)
Replies: 18
by Russ T Fender » Fri Aug 05, 2022 9:49 pm » in General Discussion Forum (started 2019)

First post

The needle on the ammeter on my '27 moves to the charge side when the lights are turned on and the engine is off so I reversed the wires but when I reversed the wires the lights don't go on and the needle doesn't move. I put the wires back the way they were and the lights work again and the ammeter still shows positive when the lights are on and...

Last post

Westach is a reputable company and I have used their products in the past without issue. I have a small stash of good original ammeters, so I don’t need to buy one of these. If I was, I would call their tec support and ask them about the unit and find out what kind of movement they are using before shelling out that much cash.

18 Replies

429 Views

Last post by paulmikeska
Sun Aug 07, 2022 6:01 pm
dist. cap

Last post by Tom VanMeeteren « Sun Aug 07, 2022 5:42 pm
Posted in Classifieds - Parts
Replies: 5
by Melba Nolan » Sat Aug 06, 2022 9:41 am » in Classifieds - Parts

First post

20220806_235448.jpg 20220806_235513.jpg 20220806_235521.jpg

FOR SALE: New Bosch distributor cap. still in box $15 12/27 plus postage

Last post

newer Bosch

5 Replies

232 Views

Last post by Tom VanMeeteren
Sun Aug 07, 2022 5:42 pm
1909 oil filler and gas cap F/S

Last post by Layden Butler « Sun Aug 07, 2022 5:26 pm
Posted in Classifieds - Parts

by Layden Butler » Sun Aug 07, 2022 5:26 pm » in Classifieds - Parts

Would let this oil filler go for $60, domestic post paid
Gas tank cap is $125 plus $10 domestic postage

0 Replies

147 Views

Last post by Layden Butler
Sun Aug 07, 2022 5:26 pm
what have you done with your model T in August

Last post by Bryce S. « Sun Aug 07, 2022 5:00 pm
Posted in General Discussion Forum (started 2019)
Replies: 15
by ironhorse » Tue Aug 02, 2022 7:30 pm » in General Discussion Forum (started 2019)

First post

Pressured washed the frame got 99&44/100% of the red clay off
as far as I can tell this is a piece of copper tubing used as a shim for worn brake pivots.
DSC_0173.JPG
same for other side
DSC_0173.JPG
this area seems to be bent
DSC_0171.JPG
better view
DSC_0172.JPG
well as straight as I could get it.

Last post

Just got a bulk order of parts in and now am coming up with a choke rod for the U&J so I don't have to have the wife hold the lever by hand every time we go to use it. She sure is supportive of the cause.

15 Replies

1075 Views

Last post by Bryce S.
Sun Aug 07, 2022 5:00 pm
FS—-1909 oil filler cap/screen

Last post by Runabout « Sun Aug 07, 2022 4:16 pm
Posted in Classifieds - Parts
Replies: 1
by Runabout » Sun Aug 07, 2022 10:08 am » in Classifieds - Parts

First post

I sold one of these a couple years ago, I was sure I had 2 of them but miss placed the other one I found it… I had stuck back in a drawer. Should be correct for a 1909 Model T . $65 to your door anywhere in the lower 48. 423-2eight4-97fifty text or call.
86105C94-569B-4AA0-894D-E295E931B8F7.jpeg 93F94B98-861E-4EB2-B22C-82645F859109.jpeg...

Last post

Sold to Richard Pending payment…Thank you Sir.

1 Replies

232 Views

Last post by Runabout
Sun Aug 07, 2022 4:16 pm
Timing cover guage

Last post by Melba Nolan « Sun Aug 07, 2022 4:08 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Sat Jul 23, 2022 8:08 am » in Classifieds - Parts

First post

For Sale: Eugene Wright timing cover guage $75 plus postage 20220723_065454.jpg 20220723_065508.jpg

Last post

move to top

1 Replies

320 Views

Last post by Melba Nolan
Sun Aug 07, 2022 4:08 pm
Transport 1926 Model T from ND to IN

Last post by frichardson « Sun Aug 07, 2022 4:05 pm
Posted in Services

by frichardson » Sun Aug 07, 2022 4:05 pm » in Services

We need to transport Jim Eck's 1926 Model T from Grand Forks ND to Avon IN.
My wife is trying to get her dad's car to its new home.
Transport date is flexible.

I already know it could be a challenge. I'm looking for options to accomplish this goal.
I'm trying to avoid transport brokers.

Thank you,
Fred Richardson
317-451-8092

0 Replies

9 Views

Last post by frichardson
Sun Aug 07, 2022 4:05 pm
breather or oil filler cap for 1909, pack nut, cover band plus

Last post by Melba Nolan « Sun Aug 07, 2022 3:54 pm
Posted in Classifieds - Parts
Replies: 3
by Melba Nolan » Thu Jun 23, 2022 10:23 am » in Classifieds - Parts

First post

For sale: crankcase breather or oil filler cap in good condition. $50
Exhaust pipe pack nut $10
cover band for generator $5,
heavy flat pedal Brass trim set $50
steering gear quadrant $20
Aladdin Wick Cleaner $10
Flame Spreader $15

all plus postage
20220719_195847.jpg 20220719_195823.jpg 20220719_195835.jpg

Last post

move to top

3 Replies

447 Views

Last post by Melba Nolan
Sun Aug 07, 2022 3:54 pm
Schrader tire tube stem dust covers F/S

Last post by Layden Butler « Sun Aug 07, 2022 3:42 pm
Posted in Classifieds - Parts

by Layden Butler » Sun Aug 07, 2022 3:42 pm » in Classifieds - Parts

Set of nice original covers stripped to bare brass, rim washers included. $75, domestic postage $10.

0 Replies

104 Views

Last post by Layden Butler
Sun Aug 07, 2022 3:42 pm
Rim bolts and nuts

Last post by Melba Nolan « Sun Aug 07, 2022 3:16 pm
Posted in Classifieds - Parts
Replies: 6
by Melba Nolan » Fri Jul 22, 2022 8:51 pm » in Classifieds - Parts

First post

20220722_213730.jpg FOR SALE: Demountable rim bolts and nuts. 32 pieces $46 plus postage

Last post

sold pending payment

6 Replies

348 Views

Last post by Melba Nolan
Sun Aug 07, 2022 3:16 pm
WTB 26,27 tudor drivers seat frame and pan

Last post by danboivin « Sun Aug 07, 2022 2:50 pm
Posted in Classifieds - Parts

by danboivin » Mon Jul 11, 2022 6:31 pm » in Classifieds - Parts

Tudor seat.jpg
Does anybody have the dimensions of this frame? I may consider fabrication.

0 Replies

154 Views

Last post by danboivin
Sun Aug 07, 2022 2:50 pm
FS Ford T spark plugs

Last post by KimDobbins « Sun Aug 07, 2022 1:23 pm
Posted in Classifieds - Parts

by KimDobbins » Sun Aug 07, 2022 1:23 pm » in Classifieds - Parts

10 champion X brass top plugs, 8.00 each. Set of 4 NOS Wizard twin fire plugs, $60.00 . Kdmks At att.net.

0 Replies

238 Views

Last post by KimDobbins
Sun Aug 07, 2022 1:23 pm
26-27 wire wheels and hubs, or complete chassis minus body

Last post by Shane Lach « Sun Aug 07, 2022 12:31 pm
Posted in Classifieds - Parts
Replies: 6
by Shane Lach » Mon Jul 11, 2022 6:52 am » in Classifieds - Parts

First post

PXL_20220708_161213691~2.jpg I have for sale 4 nice wire wheels and hubs. I will strip them from this chassis, or sell the complete rolling chassis minus the body. Engine is unknown but turns over freely. Nothing feels stuck. Engine has a distributor setup on it.

Wire wheels and hubs- $1500

Complete rolling chassis- $2000

Last post

Wire wheels are sold. Complete 26-27 frame axles and engine remains. Will part out. Let me.know what you need.

6 Replies

892 Views

Last post by Shane Lach
Sun Aug 07, 2022 12:31 pm
Want to Buy - Model T in Arizona

Last post by DesertG « Sun Aug 07, 2022 12:25 pm
Posted in Classifieds - Vehicles
Replies: 16
by DesertG » Mon Jul 18, 2022 5:45 pm » in Classifieds - Vehicles

First post

Hello Guys, looking to buy and running and driving Model T in Arizona. Any year or body style.

Shoot me an email if you are selling. sbill4768@gmail.com

Thank you

Last post

Sammie was at the Watson lake car show yesterday in Prescott, you could have talked to him there.

I know Sammy as I bought Model A parts from him. I emailed him about Ts.

16 Replies

1090 Views

Last post by DesertG
Sun Aug 07, 2022 12:25 pm
Today's Social Distancing Video

Last post by Scott C. « Sun Aug 07, 2022 11:51 am
Posted in General Discussion Forum (started 2019)
Replies: 391
by Scott C. » Wed Apr 01, 2020 10:22 pm » in General Discussion Forum (started 2019)
1

2

3

4
First post

Here is my idea of social distancing .

Last post

Who wants to go for ride a ride in the 25 Roadster pickup?

Here is episode #1 Hop on in and let's get rolling!
391 Replies

80715 Views

Last post by Scott C.
Sun Aug 07, 2022 11:51 am
Early 1926 headlight bucket/reflector

Last post by Corey Walker « Sun Aug 07, 2022 10:44 am
Posted in Classifieds - Parts
Replies: 1
by Corey Walker » Tue Aug 02, 2022 4:00 pm » in Classifieds - Parts

First post

Has a couple pinholes in the rear but pretty solid. Reflector looks good but needs polishing. $30 plus $16.10 shipping.
Email: wlkma9@gmail.com

Last post

Back to top.

1 Replies

173 Views

Last post by Corey Walker
Sun Aug 07, 2022 10:44 am
tail lights

Last post by Melba Nolan « Sun Aug 07, 2022 10:42 am
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Tue Jun 28, 2022 3:29 pm » in Classifieds - Parts

First post

20220628_141601.jpg
For Sale: FORD Script tail light 19/23 $30
stop light 19/25 $25

20220628_141526.jpg

plus postage 20220628_141700.jpg 20220628_141630.jpg 20220628_141526.jpg 20220628_141601.jpg

Last post

move to top

2 Replies

558 Views

Last post by Melba Nolan
Sun Aug 07, 2022 10:42 am
FS STARTER SWITCHES

Last post by Mark Chaffin « Sun Aug 07, 2022 10:41 am
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Aug 04, 2022 8:25 pm » in Classifieds - Parts

First post

For those of you who prefer to restore original starter switches. This lot of six complete switches $40.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20220804_160801.jpg

20220804_160828.jpg

Last post

Sold to Brian. Thanks Brian!

1 Replies

290 Views

Last post by Mark Chaffin
Sun Aug 07, 2022 10:41 am
early steering wheel

Last post by Melba Nolan « Sun Aug 07, 2022 10:40 am
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Tue Jul 12, 2022 6:13 pm » in Classifieds - Parts

First post

For
sale: I think this is an early steering wheel' It is 17 OD and cast ? very heavy and very good condition. $125 plus postage
20220712_170540.jpg 20220712_170528.jpg
missing 2 screws. I think I have some, if so will give them to you.

Last post

move to top

2 Replies

419 Views

Last post by Melba Nolan
Sun Aug 07, 2022 10:40 am
FS HOOD SHELF SET (09-16) NEW

Last post by Mark Chaffin « Sun Aug 07, 2022 10:40 am
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Sat Aug 06, 2022 10:29 am » in Classifieds - Parts

First post

New in the wrapper wood hood shelf set (09-16). Price is $25.00 plus $16.80 domestic shipping. Cheaper than dealer price! Only one set available. Mark Chaffin (951) 805-0928

Screenshot_20220806-072514_Chrome.jpg

Last post

Sold to Randy. Thank you Randy!

1 Replies

111 Views

Last post by Mark Chaffin
Sun Aug 07, 2022 10:40 am
fender eye bolts, switch plate, fan brackets and more

Last post by Melba Nolan « Sun Aug 07, 2022 10:36 am
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Thu Jun 09, 2022 6:00 pm » in Classifieds - Parts

First post

For Sale: Fender eye bolts and nuts. 14/25 $5 each Ignition switch plate with amp meter Ford script on amp meter and below switch. switch is broken. $50. Ignition switch but no amp meter. Ford script. $50 Ford script spindle arm $25 spindle arm in primer color$10. no script but does say made in USA front spring perch 19/27 $20. Fan bracket with...

Last post

move to top

1 Replies

282 Views

Last post by Melba Nolan
Sun Aug 07, 2022 10:36 am
WTB 4th main bearing cup

Last post by Chuck Stevens « Sun Aug 07, 2022 10:33 am
Posted in Classifieds - Parts
Replies: 14
by Chuck Stevens » Sat Aug 06, 2022 7:24 am » in Classifieds - Parts

First post

WTB 4th main bearing cup to rebuild PM me thanks chuck.

Last post

Thanks for the help,chuck.

14 Replies

307 Views

Last post by Chuck Stevens
Sun Aug 07, 2022 10:33 am
Anyone had problems with viton tip in Holley NH?

Last post by Art M « Sun Aug 07, 2022 10:17 am
Posted in General Discussion Forum (started 2019)
Replies: 13
by NY John T » Sat Aug 06, 2022 4:10 pm » in General Discussion Forum (started 2019)

First post

Hi All,
In trying to start my 26 Tourer with 23 engine I rebuilt the Holley NH and used the viton tipped needle/float valve that was supplied with the rebuild kit. It wouldn't start no matter what. Ran down the battery. Finally today took the carb off and saw that the new (viton tipped) needle was stuck. I had the same issue with another Holley NH...

Last post

John,
No need to apologize. I really didn't know how much to take out The bore was so crudy that a .100 inch bit would barely fit through. I merely opened it until the bore looked clean, which was .150 inch.

I am just lucky that the needle hasn't become stuck. I am going to change the seat before any problems occur.. 650 miles on it and my luck...

13 Replies

477 Views

Last post by Art M
Sun Aug 07, 2022 10:17 am
FJ - Some Humor To Brighten Your Day

Last post by perry kete « Sun Aug 07, 2022 9:16 am
Posted in OT - Off topic
Replies: 1468
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

11

12

13

14

15
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

AA10mTiy.jpg
1468 Replies

283404 Views

Last post by perry kete
Sun Aug 07, 2022 9:16 am
40 tooth ring gear

Last post by Michael Davis « Sun Aug 07, 2022 8:57 am
Posted in Classifieds - Parts
Replies: 1
by Michael Davis » Fri Jul 22, 2022 5:15 pm » in Classifieds - Parts

First post

Nice 40 tooth ring gear.$60.00 plus $16.00 shipping

Please email me
Rustrodsrule@yahoo.com

Thanks
Mike

Last post

back to the top

1 Replies

218 Views

Last post by Michael Davis
Sun Aug 07, 2022 8:57 am
11 tooth pinion gear

Last post by Michael Davis « Sun Aug 07, 2022 8:56 am
Posted in Classifieds - Parts
Replies: 1
by Michael Davis » Fri Jul 22, 2022 5:30 pm » in Classifieds - Parts

First post

Nice 11 tooth pinion gear. $50.00 plus 8.00 shipping.

Email me
Rustrodsrule@yahoo.com
Thanks Mike

Last post

back to the top

1 Replies

232 Views

Last post by Michael Davis
Sun Aug 07, 2022 8:56 am
Atwater Kent Front Plate K2 Distributor

Last post by ThreePedalTapDancer « Sun Aug 07, 2022 8:41 am
Posted in Classifieds - Parts
Replies: 5
by ThreePedalTapDancer » Sat Aug 06, 2022 2:58 pm » in Classifieds - Parts

First post

Here is a non generator early Atwater Kent K2 cast iron, automatic advance, front plate distributor for the Model T Ford. It is complete except for the cam drive gear, which is still being sold by the vendors. Includes the correct Atwater Kent coil. The coil is neat because it has a “kick switch” starter button on it for “free starting” on...

Last post

Price change 275 includes shipping lower 48

5 Replies

157 Views

Last post by ThreePedalTapDancer
Sun Aug 07, 2022 8:41 am
Banned Members

Last post by Joe Bell « Sun Aug 07, 2022 7:27 am
Posted in General Discussion Forum (started 2019)
Replies: 30
by A Whiteman » Thu Aug 04, 2022 4:29 pm » in General Discussion Forum (started 2019)

First post

There has been some discussion lately about banned members on the forum. I have nothing to comment on any specific case.

Rather I just stumbled on the following feature of the forum software that I did not know existed:

Foes
Foes are users which will be ignored by default. Posts by these users will not be fully visible. Personal messages from...

Last post

I always enjoyed reading them also but boy there was some that liked picking on him, and as some one said earlier there is always different ways to skin a cat!!

30 Replies

2213 Views

Last post by Joe Bell
Sun Aug 07, 2022 7:27 am
1903/04 model A

Last post by CudaMan « Sun Aug 07, 2022 7:22 am
Posted in OT - Off topic
Replies: 3
by NU2theT » Sat Aug 06, 2022 9:21 pm » in OT - Off topic

First post

Where on these vehicles can I locate a serial number ect. And any other info would be great on this early model, thanks in advance.

Last post

If you can find a copy, get the book Pate's Early Ford Encyclopedia , it is full of information on early Fords. Be sure the copy you get still has the CD in the pocket on the back cover with lots of extra information not in the print book. :)

3 Replies

115 Views

Last post by CudaMan
Sun Aug 07, 2022 7:22 am
Complete, all original 1926 Fordor restoration project.

Last post by Novice « Sun Aug 07, 2022 1:36 am
Posted in Classifieds - Vehicles
Replies: 10
by jiminbartow » Mon May 02, 2022 10:57 pm » in Classifieds - Vehicles

First post

Check out eBay item #115395561875 for very nice, completely original non-running1926 Model T Fordor restoration project. Never has been worked on. Lots more pictures with the eBay listing. If you don’t want to buy through eBay, you can contact me and buy it from me for $8,500.00. I live in Bartow, Florida. Jim Patrick...

Last post

According to e-bay ad. It sold May 30th 2022 for $8500.00

10 Replies

2320 Views

Last post by Novice
Sun Aug 07, 2022 1:36 am
What carb is needed for a 1915?

Last post by Steve Jelf « Sun Aug 07, 2022 12:46 am
Posted in General Discussion Forum (started 2019)
Replies: 7
by 1923orange » Sat Aug 06, 2022 10:27 am » in General Discussion Forum (started 2019)

First post

Looking to build a 1915 ww1 patrol car replica. What carb would be best or correct? Thanks!

Last post

Here are a few more G photos. They do clean up nicely.

IMG_2337 copy.JPG

IMG_2339 copy.JPG

IMG_2340 copy.JPG
Note the flange around the hole at the choke end of the carburetor. Some have that and some don't. I prefer it as it's helpful in mounting an air filter.

IMG_3833.JPG
Years ago at Iola I saw this G that was desperate...

7 Replies

322 Views

Last post by Steve Jelf
Sun Aug 07, 2022 12:46 am
Rear Spring--Odd Situation

Last post by jiminbartow « Sat Aug 06, 2022 11:37 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by BLB27 » Fri Aug 05, 2022 9:46 pm » in General Discussion Forum (started 2019)

First post

I have noticed an odd situation with rear spring for my 1927 coupe. The end of second leaf on the right side is not in contact with the bottom leaf. The attached photo show the situation.

While not shown in the photos, there is a slight wear pattern on top of the bottom spring below the end of the second leaf.

Is this problem??

Last post

Very good looking springs. While the springs are on the paper, go ahead and outline them so once you re-arch the leafs, you can see if there is a difference in the arc of the springs. Everything I said before still stands. First thing you need to do is take the upward bend out of the second from the bottom spring as spelled out earlier. It appears...

12 Replies

454 Views

Last post by jiminbartow
Sat Aug 06, 2022 11:37 pm
axle shaft fan starter drive coil box

Last post by Melba Nolan « Sat Aug 06, 2022 10:56 pm
Posted in Classifieds - Parts
Replies: 4
by Melba Nolan » Wed Jun 15, 2022 7:59 am » in Classifieds - Parts

First post

For sale: axle shaft it looks like it has not been used. $75 plus shipping
hasslers $50 plus postage
New timing chain $45 plus shipping
fan with bracket $40
fuel shutoff valve $30
cylinder valve cover $6 each
good starter drive $45
coil box 15-25 $150
20220608_202930.jpg 20220607_092949.jpg 20220607_092909.jpg 20220607_092858.jpg...

Last post

have more pictures

4 Replies

555 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:56 pm
New misc oil seal thrust washer

Last post by Melba Nolan « Sat Aug 06, 2022 10:49 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Thu Jun 23, 2022 8:27 pm » in Classifieds - Parts

First post

For Sale: steering gear pin set for 9/27 $2
front axle and steering castle nuts for 9/27
MBB Quadrant mounting rivets. BRASS $1
lower crankcase cover bolts 17 pcs. 9/27 $3
Head bolts High Cylinder 3 1/4 $1.75 each
Differential gear key $1.50
Fan bushing $7.50 pr. 20/27
Manifold studs and nuts 9/23 $2 each
Brass thrust washer $12 each
Brake rod...

Last post

move to top

1 Replies

293 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:49 pm
Brass and misc new

Last post by Melba Nolan « Sat Aug 06, 2022 10:10 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Sun Jul 17, 2022 3:35 pm » in Classifieds - Parts

First post

FOR SALE; rear brake camshaft lever pin (4 pieces) 09/25 $1.00
steering gear pinion set (3 pieces) 09/27 $2.00
bendix cover screw set/special (4 pcs.) $2.00

brass gas line pack nut 09/27 (2 pcs.) $3.50
Brass plated gas cap 24/27 $25

all plus postage 20220717_142738.jpg 20220717_142728.jpg

Last post

move to top

2 Replies

519 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:10 pm
Head Bolts

Last post by Melba Nolan « Sat Aug 06, 2022 10:08 pm
Posted in Classifieds - Parts
Replies: 4
by Melba Nolan » Sat Jul 16, 2022 11:12 pm » in Classifieds - Parts

First post

FOR SALE: cylinder head bolts new still in bag 15 pcs. 1918/27 $25 plus postage

Last post

move to top

4 Replies

403 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:08 pm
FS - Model T Crankshafts

Last post by RajoRacer « Sat Aug 06, 2022 10:03 pm
Posted in Classifieds - Parts
Replies: 4
by OldFord » Sat Aug 06, 2022 9:52 am » in Classifieds - Parts

First post

Nice Model T crankshafts for sale. Two have standard mains and rods, two have standard mains and .010 under rods. Std/Std: $250 each; Std/.010: $125 each. Can bring to Waterbury. 518-755-0986.

Last post

Wrong way, Brad - '26-'27 cranks all have parallel throws.

4 Replies

378 Views

Last post by RajoRacer
Sat Aug 06, 2022 10:03 pm
steering gear and misc

Last post by Melba Nolan « Sat Aug 06, 2022 10:01 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 10:01 pm » in Classifieds - Parts

For sale: steering gear bracket $40 plus postage
pitman arm and key $30 plus postage
steering wheel nut Brass $14 plus postage 6/13 New
cast aluminum column support bracket with horn groove NEW 15/23 $25

0 Replies

87 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:01 pm
15 touring

Last post by Jjasy1926 « Sat Aug 06, 2022 9:50 pm
Posted in Classifieds - Vehicles
Replies: 4
by BobShirleyAtlantaTx » Mon Jan 24, 2022 11:34 am » in Classifieds - Vehicles

First post

An original, unrestored 15 with proper motor. It has a starter added and demountable wheels. Very solid. Call with questions, 903-824-1949. 28719DC4-1E7B-44E8-BE8F-D791808C5ECE.jpeg A09D5A5E-0870-4388-B8AA-73A71DA11CF7.jpeg FE0F2B24-2898-43A5-9A2A-9C9CCEC7951B.jpeg 2405164B-10B0-4006-A39F-7753EEC174C1.jpeg 88B7C8B4-A92B-4921-AEED-A84EC007897A.jpeg...

Last post

Still for sale?

4 Replies

3557 Views

Last post by Jjasy1926
Sat Aug 06, 2022 9:50 pm
Fs two piece timer

Last post by Bjerm « Sat Aug 06, 2022 9:40 pm
Posted in Classifieds - Parts
Replies: 4
by Bjerm » Mon Aug 01, 2022 7:55 pm » in Classifieds - Parts

First post

Two piece timer appears to be in good shape complete. $800 plus shipping best way to reach me is by email Bjerm10@gmail.com

Last post

Sold pending payment thanks

4 Replies

486 Views

Last post by Bjerm
Sat Aug 06, 2022 9:40 pm
water outlet

Last post by Melba Nolan « Sat Aug 06, 2022 9:35 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 9:35 pm » in Classifieds - Parts

FOR SALE: used cylinder head water upper outlet connection I think? $5 plus postage
20220806_121619.jpg 20220806_121609.jpg

0 Replies

65 Views

Last post by Melba Nolan
Sat Aug 06, 2022 9:35 pm
seats

Last post by Moxie26 « Sat Aug 06, 2022 9:29 pm
Posted in General Discussion Forum (started 2019)
Replies: 11
by andy2794 » Tue Jun 07, 2022 8:00 pm » in General Discussion Forum (started 2019)

First post

I purchased a 1916 Touring. It came with only 1 seat cushion. How do I know if it is for the front or back or will it fit either? Here is what Langs has to offer for the back rest for the front & rear:

Seat Backrest Spring, Touring and Roadster Front Backrest Item Number: TS7028 Year: 1914-1916 $99.00

Seat Backrest Spring, Touring and Roadster...

Last post

Hey Andy 2794 .... How did you make out getting new seat springs for your car ??

11 Replies

830 Views

Last post by Moxie26
Sat Aug 06, 2022 9:29 pm
outside of track measurement

Last post by Mark Chaffin « Sat Aug 06, 2022 9:14 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by tkeithlu » Sat Aug 06, 2022 9:45 am » in General Discussion Forum (started 2019)

First post

Newbie here. Just purchased a 1924 depot truck. I'm trying to reinforce the ramp and floor of a covered trailer to bring our prize back to it's new home, and don't know the outside and inside of the track. The previous owner is not available. The track itself is 56 inches, but how wide are the tires on either side of that? I want to make loading...

Last post

Rent one of these 6 x 12 utility trailers from UHaul $35.00! Both a stock T and TT fit perfectly inside. Been there. Done that numerous times.

Screenshot_20220806-181111_Chrome.jpg

12 Replies

299 Views

Last post by Mark Chaffin
Sat Aug 06, 2022 9:14 pm
PENDING Buckeye Jack Handle - Original

Last post by SoNorCal « Sat Aug 06, 2022 8:57 pm
Posted in Classifieds - Parts
Replies: 6
by Benji » Thu Aug 04, 2022 9:35 pm » in Classifieds - Parts

First post

Well, I need to actually go through all my stuff before I buy anything else. I found this buckey jack handle at hershey last year, thinking I didnt have one. I found I did buy one at some point in the past several years, and found it in my stoage closet where I keep my good part safe.

So, this one is up for grabs. Its about 18 inches long, and...

Last post

So it looks like I picked the wrong day to be out of town and not check the forum. If all the other folks fall off the list, or anyone else has one to sell - I’m here 😄

6 Replies

374 Views

Last post by SoNorCal
Sat Aug 06, 2022 8:57 pm
FS 1912 timing cover for oil filler timer

Last post by KimDobbins « Sat Aug 06, 2022 8:54 pm
Posted in Classifieds - Parts

by KimDobbins » Sat Aug 06, 2022 8:54 pm » in Classifieds - Parts

Very nice casting of the 1912 oil filler timer cover. Needs finish machining.$75.00 plus $18.00 priority mail shipping to 48 states. KdmksAT att.net.

0 Replies

150 Views

Last post by KimDobbins
Sat Aug 06, 2022 8:54 pm
FS transmission lifting tool

Last post by KimDobbins « Sat Aug 06, 2022 8:49 pm
Posted in Classifieds - Parts

by KimDobbins » Sat Aug 06, 2022 8:49 pm » in Classifieds - Parts

Nice tool for lifting your transmission on and off your engine. $75 plus $16 for priority mail shipping to 48 states. kdmks AT att.net.

0 Replies

238 Views

Last post by KimDobbins
Sat Aug 06, 2022 8:49 pm
steering column

Last post by Melba Nolan « Sat Aug 06, 2022 8:42 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 8:42 pm » in Classifieds - Parts

For Sale: complete assembled brass steering column $600 plus shipping
20220806_183425.jpg 20220806_183358.jpg 20220806_114030.jpg 20220806_114041.jpg 20220806_183145.jpg

0 Replies

111 Views

Last post by Melba Nolan
Sat Aug 06, 2022 8:42 pm
Long Island, NY Model Ts

Last post by KLTagert « Sat Aug 06, 2022 8:09 pm
Posted in General Discussion Forum (started 2019)
Replies: 2
by KLTagert » Mon Aug 01, 2022 9:56 pm » in General Discussion Forum (started 2019)

First post

A group of Model T enthusiasts on Long Island are working to form a MTFCA Chapter.
If interested, contact Bob at jugflyer@aol.com or send a message to me.

Kathy Tagert

Last post

Thanks John.
Bobs got your name and he’s getting a good response so far from T folks in the area.

Kathy T

2 Replies

350 Views

Last post by KLTagert
Sat Aug 06, 2022 8:09 pm
touring in a 1922 centerdoor

Last post by George House « Sat Aug 06, 2022 7:29 pm
Posted in General Discussion Forum (started 2019)
Replies: 3
by mike37 cdn » Sat Aug 06, 2022 6:22 pm » in General Discussion Forum (started 2019)

First post

has anyone dun tours in a 22 centerdoor is it a good riding car thanks mike

Last post

My ‘19 centerdoor is the best touring T of all in my ‘stable’. It wouldn’t be without accessory short 3 leaf springs on all 4 corners. It requires turning front spring perches 180*. And it runs scary fast with Waukesha Ricardo head, straight thru NH and hi volume intake. Maybe the easier to find Hasslers on all 4 corners will do the same ease of...

3 Replies

169 Views

Last post by George House
Sat Aug 06, 2022 7:29 pm
dogbone

Last post by Melba Nolan « Sat Aug 06, 2022 7:27 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 7:27 pm » in Classifieds - Parts

FOR SALE: Brass dog bone radiator cap. In very good condition just needs polished. Threads are in good condition. $30 plus postage
20220805_201855.jpg 20220805_201829.jpg

0 Replies

167 Views

Last post by Melba Nolan
Sat Aug 06, 2022 7:27 pm
1917 Speedster for sale

Last post by Henry K. Lee « Sat Aug 06, 2022 6:54 pm
Posted in Classifieds - Vehicles
Replies: 11
by spadpilot » Sat Jun 25, 2022 12:18 pm » in Classifieds - Vehicles

First post

1917 Model T Ford Speedster for Sale
This car has never been driven. Zero miles!
The bones of this project were discovered in an abandoned mine in the
California Gold country about 5 years ago.
All frame rails, cross members, suspension and steering components have been
blasted and powder coated. The engine has been completely rebuilt with...

Last post

BTT!!!!!!!!!!!!!

11 Replies

3633 Views

Last post by Henry K. Lee
Sat Aug 06, 2022 6:54 pm
Model T Small Drum Ruckstell Axle Unit For Sale, $1000 or Best Reasonable Offer.

Last post by Mr. T Ford « Sat Aug 06, 2022 6:49 pm
Posted in Classifieds - Parts
Replies: 2
by Mr. T Ford » Thu Jul 14, 2022 2:19 pm » in Classifieds - Parts

First post

Model T Small Drum Ruckstell Axle Unit For Sale, $1000 or Best Reasonable Offer.
Ruckstell Unit To Be Picked Up In Conn.

Last post

Model T Small Drum Ruckstell Axle Unit For Sale, $1000 or Best Reasonable Offer No Longer Available

2 Replies

818 Views

Last post by Mr. T Ford
Sat Aug 06, 2022 6:49 pm
Free: Steel Truss Head Rivets 3/16" x 1 1/4"

Last post by catfishunter99 « Sat Aug 06, 2022 5:11 pm
Posted in Classifieds - Parts
Replies: 3
by Rodger Erickson » Fri Jul 29, 2022 10:39 am » in Classifieds - Parts

First post

Free: approx 4 lbs (roughly 250 - 300 pcs.) Truss head (or mushroom head or brazier head) rivets, with a 3/16 x 1 1/4 shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or...

Last post

PM sent for the brass rivets

3 Replies

279 Views

Last post by catfishunter99
Sat Aug 06, 2022 5:11 pm
FS SUPER NICE 1925 BOAT-TAIL SPEEDSTER

Last post by Henry K. Lee « Sat Aug 06, 2022 4:42 pm
Posted in Classifieds - Vehicles
Replies: 11
by Henry K. Lee » Sat Jun 26, 2021 8:36 pm » in Classifieds - Vehicles

First post

This was a labor of love building from a scrap pile at my Dads in Montana. Over 20 years of collecting parts, multiple design changes until I was pleased. It is a fun one for sure.

ENGINE:
-0.030 bores, standard topped pistons
-Dunn weighted EE crank with 0.010/0.010 on mains and rods (dippers installed on rods)
-Stainless Steel valves with hard...

Last post

Until 1 September..., $35,000.00 FIRM!

11 Replies

4175 Views

Last post by Henry K. Lee
Sat Aug 06, 2022 4:42 pm
FS 1914 Gentleman's Speedster- Very Fast!!!!

Last post by Henry K. Lee « Sat Aug 06, 2022 4:41 pm
Posted in Classifieds - Vehicles
Replies: 33
by Henry K. Lee » Tue Jul 06, 2021 7:16 pm » in Classifieds - Vehicles

First post

Well a decision was made between Father and Son. His aging (unable to drive) and my occupational/genetic joint damage (hard to perform simple task) time to thin the herd some more. This car was clocked by my wife in our 1972 Vette doing 92 MPH off of Norris hill in Montana in 1997 after the build. The best cruising T we have ever had! No...

Last post

Until 1 September..., $35,000.00 FIRM!

33 Replies

11134 Views

Last post by Henry K. Lee
Sat Aug 06, 2022 4:41 pm
Stutzman's

Last post by Rich Eagle « Sat Aug 06, 2022 3:27 pm
Posted in General Discussion Forum (started 2019)
Replies: 2
by ModelT46 » Sat Aug 06, 2022 2:23 pm » in General Discussion Forum (started 2019)

First post

I need a new set of wheels for my 1910. Does someone have Stutzman's email address or web site info?

Last post

...and this:

2 Replies

409 Views

Last post by Rich Eagle
Sat Aug 06, 2022 3:27 pm
This was trucking-Old Photos

Last post by Rich Eagle « Sat Aug 06, 2022 3:21 pm
Posted in OT - Off topic
Replies: 1067
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

7

8

9

10

11
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

Speaking of which (20s crime) 0ne of the buses in the park was running poorly during prohibition. The gas filler opening in the gas tank was about 4 1/2 diameter. It was discovered that whiskey bottle labels had had come off bottles stowed there and covered the outlet restricting flow.
WhtCap.jpg
Just for reference.
Bus66b.jpg
1067 Replies

210596 Views

Last post by Rich Eagle
Sat Aug 06, 2022 3:21 pm
Who Bought That 1910 Touring at This Year’s Long Beach Swap Meet?

Last post by RajoRacer « Sat Aug 06, 2022 2:17 pm
Posted in General Discussion Forum (started 2019)
Replies: 41
by NorthSouth » Sat Jul 30, 2022 4:23 pm » in General Discussion Forum (started 2019)

First post

-
Here is a random question:

Would anyone, by shear chance, know who bought this 1910 Ford Touring Car at this year’s Long Beach Swap Meet? …I live in the area and would very much like to know who bought it. Because, I bought nearly the identical car, same basic set up, one year ago and have been restoring it “specifically for touring” ever...

Last post

I have a very large stick available if anyone feels the need to beat this thread up any more !!!

41 Replies

2039 Views

Last post by RajoRacer
Sat Aug 06, 2022 2:17 pm
Top installation on a 1910 touring

Last post by KimDobbins « Sat Aug 06, 2022 1:56 pm
Posted in General Discussion Forum (started 2019)
Replies: 13
by Belliott3 » Thu Aug 04, 2022 8:56 pm » in General Discussion Forum (started 2019)

First post

I’m about to start the install of my Classtique two man top for my 1910 touring, and I was wondering if someone out there has installed one and has any suggestions. I’m particularly interested in how to install the front and rear leather straps during the install: I’m assuming they go on first, then the bows are tacked into position with the...

Last post

A roll down windshield in case you didn't get a metal/ glass windshield with your car.

13 Replies

457 Views

Last post by KimDobbins
Sat Aug 06, 2022 1:56 pm
Model T "RACER" on B.A.T.

Last post by Rich Eagle « Sat Aug 06, 2022 1:40 pm
Posted in Classifieds - Vehicles
Replies: 8
by Loftbed » Tue Aug 02, 2022 12:15 pm » in Classifieds - Vehicles

First post

I just listed my 1915 Model T Racer on the B.A.T. auction site.
Take a look:

Rod
PS:
This is one FAST little car!!!! :D :D :D

Last post

That is to one.
What a great car.
Thanks
Rich

8 Replies

959 Views

Last post by Rich Eagle
Sat Aug 06, 2022 1:40 pm
carburetors for sale

Last post by Melba Nolan « Sat Aug 06, 2022 12:04 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 12:04 pm » in Classifieds - Parts

For sale: 1917 Brass carburetor for sale. Model L2 $350 plus postage 20220806_105131.jpg 20220806_105259.jpg

0 Replies

241 Views

Last post by Melba Nolan
Sat Aug 06, 2022 12:04 pm
Three Questions

Last post by BLB27 « Sat Aug 06, 2022 12:01 pm
Posted in General Discussion Forum (started 2019)
Replies: 4
by BLB27 » Fri Aug 05, 2022 10:37 pm » in General Discussion Forum (started 2019)

First post

I have questions about three items on my 1927 coupe.

1) I want to replace the rubber bumpers for my truck lid. I assume the way to remove the existing bumper is to drill it out.
How difficult is it to insert the new one? Any trick to use to do it?

2) I would like to replace the rubber bumpers that the bottom of the door glass rests on, but it...

Last post

I have new bumpers for the doors. My problem is how to remove and replace them. They appear to be riveted in place.

4 Replies

374 Views

Last post by BLB27
Sat Aug 06, 2022 12:01 pm
Kingston carburetors

Last post by Melba Nolan « Sat Aug 06, 2022 10:50 am
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Wed Jun 08, 2022 11:45 pm » in Classifieds - Parts

First post

FOR SALE: All are in very good condition. Brass Kingston #279148 carb $350
Kingston model NH carb $150
Kingston model L4 carb $75
Kingston model L4 brass top carb $125
NH top of carb $25
Straight thru top of model NH $50
plus postage

Last post

move to top

2 Replies

448 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:50 am
FS ORPHAN MACBETH LENSE

Last post by Mark Chaffin « Sat Aug 06, 2022 10:38 am
Posted in Classifieds - Parts

by Mark Chaffin » Sat Aug 06, 2022 10:38 am » in Classifieds - Parts

One orphan Macbeth lense in good condition. Green paint could use some touch up or use it as is. Price is $50 plus $16.50 domestic shipping. Mark Chaffin (951) 805-0928

20220728_171045.jpg

0 Replies

152 Views

Last post by Mark Chaffin
Sat Aug 06, 2022 10:38 am
Aluminum transmission cover (hogs head)

Last post by Melba Nolan « Sat Aug 06, 2022 10:25 am
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 10:25 am » in Classifieds - Parts

For Sale: 1913 aluminum hogs head with pedals $350 plus postage
Has FORD script cover and clutch release ring
20220805_202522.jpg 20220805_202744.jpg 20220805_202541.jpg

0 Replies

168 Views

Last post by Melba Nolan
Sat Aug 06, 2022 10:25 am
FS AERMORE EXHAUST WHISTLE AND CUTOUT

Last post by Mark Chaffin « Sat Aug 06, 2022 10:19 am
Posted in Classifieds - Parts

by Mark Chaffin » Sat Aug 06, 2022 10:19 am » in Classifieds - Parts

Aermore exhaust whistle and cutout valve NORS. No longer available from the manufacturer. This one is in excellent condition. Price was $400 now $375 with domestic shipping included! Only have one available. Mark Chaffin (951) 805-0928

Screenshot_20220806-071407_Chrome.jpg

0 Replies

121 Views

Last post by Mark Chaffin
Sat Aug 06, 2022 10:19 am
Tappet question? Not a noise...

Last post by blauvelt « Sat Aug 06, 2022 10:13 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by blauvelt » Sat Jul 30, 2022 9:21 am » in General Discussion Forum (started 2019)

First post

Are there any tappets available with an oversized foot (larger diameter) that will fit into a T block? Recall A friend tried A tappets, but i recall a lot of machine work in a space with not a lot of metal and never went any further. Thanks!

Last post

Thank you Dan, I will reach out and see if Bill is still making the tappets.

The 292/Y block tappet foot is 1 diameter- pretty much the same as the aftermarket T adjustable tappets. Your cam guy should be able to find a profile that will work with the 1 follower diameter. John is correct, Bill Stipe dis make some large diameter tappets doe use...

11 Replies

472 Views

Last post by blauvelt
Sat Aug 06, 2022 10:13 am
FS ZENITH MODEL 04 CARBURETOR

Last post by Mark Chaffin « Sat Aug 06, 2022 10:11 am
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Thu Jul 28, 2022 9:59 am » in Classifieds - Parts

First post

Nice brass Zenith Model 04 carburetor. 2 3/8 center to center. 1 3/8 throat. This one has the less common straight choke / arrestor assembly. Price is $100 plus $16.50 domestic shipping. Mark Chaffin (951) 805-0928

20220728_062651.jpg

20220728_062629.jpg

Last post

Priced to move! $100 plus shipping.

2 Replies

317 Views

Last post by Mark Chaffin
Sat Aug 06, 2022 10:11 am
PerspecTive phoTo

Last post by Bryant « Sat Aug 06, 2022 9:48 am
Posted in General Discussion Forum (started 2019)
Replies: 102
by Bryant » Tue Feb 22, 2022 6:37 am » in General Discussion Forum (started 2019)
1

2
First post

The model T. How do you see it? 46A57EE6-DF6F-4561-A777-C57F8C57F66B.jpeg

Last post

438D9A78-43A2-49BC-9DCA-6C88E1592CB4.jpeg
102 Replies

7440 Views

Last post by Bryant
Sat Aug 06, 2022 9:48 am
pedal pads

Last post by Melba Nolan « Sat Aug 06, 2022 9:44 am
Posted in Classifieds - Parts

by Melba Nolan » Sat Aug 06, 2022 9:44 am » in Classifieds - Parts

For sale: 1 each of pedal pad C R and B black rubber $8 plus shipping

0 Replies

106 Views

Last post by Melba Nolan
Sat Aug 06, 2022 9:44 am
FS COPPER HEAD GASKETS

Last post by Mark Chaffin « Sat Aug 06, 2022 9:29 am
Posted in Classifieds - Parts
Replies: 3
by Mark Chaffin » Sat Aug 06, 2022 2:27 am » in Classifieds - Parts

First post

Last two. Both appear to be in good condition. They have been sitting around for a while. Unknown manufacturer. Take your pick $50.00 each plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20220805_095326.jpg

20220805_095406.jpg

Last post

Sold to John! Coffee time! :)

3 Replies

355 Views

Last post by Mark Chaffin
Sat Aug 06, 2022 9:29 am
Fun ride, flat tire, & a shout-out!

Last post by Aussie16 « Sat Aug 06, 2022 9:24 am
Posted in General Discussion Forum (started 2019)
Replies: 4
by TWrenn » Fri Aug 05, 2022 3:45 pm » in General Discussion Forum (started 2019)

First post

Took an old friend for a ride in Isabel my '11 Torpedo. Great run. On the way home noticed she was handling squirrely . Wasn't the wind as there was none (yet anyway). Flat tire, right front. Oh goody! Pull in to a car wash that I happen to frequent with my moderns. As luck would have it, the owner, Nate Crnjak, who also owns North Coast Roofing...

Last post

Her you go Tim. Fatman rim installed. I have since had the seat cushion lowered a bit also and access from the drivers side is now possible. Ironically, I have since been able to purchase a beautiful original Bauer Fatman which will now go on the car. The brass one will go on my speedster project. Was great to do a deal with you and will be even...

4 Replies

388 Views

Last post by Aussie16
Sat Aug 06, 2022 9:24 am
Kingston L2 carburetor

Last post by Corey Walker « Sat Aug 06, 2022 8:44 am
Posted in Classifieds - Parts
Replies: 3
by Corey Walker » Tue Jul 26, 2022 4:01 pm » in Classifieds - Parts

First post

Completely disassembled and cleaned, reconditioned spray needle, new float from modern material, viton tipped float valve, choke spring, test run. $185 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

3 Replies

306 Views

Last post by Corey Walker
Sat Aug 06, 2022 8:44 am
FS COPPER HEAD GASKET

Last post by TWrenn « Sat Aug 06, 2022 8:19 am
Posted in Classifieds - Parts
Replies: 5
by Mark Chaffin » Fri Aug 05, 2022 12:59 pm » in Classifieds - Parts

First post

FITZGERALD Brand copper head gasket. Been sitting on the shelf for a bit. Appears to be unused. $75.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20220805_095259.jpg

Last post

4 minute sell! Not bad Mark!

Yeh Hank...I guess one has to literally LIVE on the classified section if they want the luck of the Irish on these! Just hope someone starts making these, or before long a lot of people are gonna be in a heap of trouble. Just think of all the engine rebuilds who need these by the DOZENS every year!

5 Replies

504 Views

Last post by TWrenn
Sat Aug 06, 2022 8:19 am
Paynesville MN 2022 unofficial "Ford and Friends" tour.

Last post by Rob « Sat Aug 06, 2022 7:28 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by Rob » Wed Aug 03, 2022 9:10 pm » in General Discussion Forum (started 2019)

First post

Loaded two 1905 and one 1907 Fords in the heat this evening. God willing, Paynesville MN by tomorrow evening.

Loading the B an K:

Loaded and ready to go:
7835463C-3F80-456B-A6FB-8BB3CCE37CFA.jpeg

0784DC80-2590-4793-BDD9-B89BEE9DC7C8.jpeg

84F44867-2575-450F-8621-790ABE2E04DE.jpeg

The F on the single trailer:...

Last post

Friday in Paynesville.

Left to right, 1904 Model A, 1905 Model F, two 1908 Model S Roadsters:

DB625367-DDFF-48A4-807D-D4D61F5C443B.jpeg

L - R, Model A, 1905 B, 1905 F:

DBEC897C-2FE8-44D8-A6D8-0E3E59D64795.jpeg

L - R, 1907 Model K, 1908 Model S Runabout:

0D5B0F84-382F-416A-9350-CD488C20D2B9.jpeg

11 Replies

672 Views

Last post by Rob
Sat Aug 06, 2022 7:28 am
Blue and Grey model T chapter

Last post by RVA23T « Sat Aug 06, 2022 1:33 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by Bryant » Sun Jul 31, 2022 9:51 am » in General Discussion Forum (started 2019)

First post

I see this model t chapter on the MTFCA list located in Maryland but can’t seem to get ahold of anyone involved in it. I don’t know if anyone here knows if it’s still up and running. They had a website before but I can’t seem to find that either. It’s the only chapter reasonably close to me so any help would be appreciated. Thanks
Bryant

Last post

Hi everyone, I’m the VP of the Central VA Model T Club here in Richmond, Va. we are an active club usually have just a couple of one day tours each year as well as our annual luncheon.

Contact has been made Thanks Bob!

11 Replies

550 Views

Last post by RVA23T
Sat Aug 06, 2022 1:33 am
Replacing wiring on a drill press

Last post by otrcman « Fri Aug 05, 2022 10:38 pm
Posted in OT - Off topic
Replies: 3
by Robert Bente » Sat Jul 09, 2022 10:28 pm » in OT - Off topic

First post

My drill press quit, so I decided it was time to replace the 50+ year old wiring. My press had a reverse switch added in the 60’s and the insulation on the wiring was old, cracked. It also had a toggle switch that was like a happy dogs tail, loose and floppy.
So I went on the chase to fix and replace old wiring.
What a rabbit hole I have dove...

Last post

I replaced the wiring on my Made in China drill press about 5 years ago. What a mess ! The wiring in the head was all single strand, very small gauge,and some of it had no insulation at all. Looked to me that somebody picked scraps off the floor and soldered it all together as necessary to go from point A to point B. When I got done the work light...

3 Replies

391 Views

Last post by otrcman
Fri Aug 05, 2022 10:38 pm
FS 30x3 1/2 Hayes wire wheels

Last post by pre15dale « Fri Aug 05, 2022 8:35 pm
Posted in Classifieds - Parts
Replies: 1
by pre15dale » Fri Aug 05, 2022 3:27 pm » in Classifieds - Parts

First post

For sale 5 nice Hayes 3 pin drive wire wheels 4 hubs and 4 caps(2rights & 2 lefts) $1950.00 plus shipping I haven't figured out how to post pics but can text them if interested

Last post

Wheels and hubs Sold to the first caller

1 Replies

302 Views

Last post by pre15dale
Fri Aug 05, 2022 8:35 pm
Fronty water manifold

Last post by Kevin Pharis « Fri Aug 05, 2022 8:00 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by Kevin Pharis » Wed Aug 03, 2022 11:23 pm » in General Discussion Forum (started 2019)

First post

I have been pondering for years a way to circulate extra water to cool the rear cylinders in my speedster engine. I always imagined something similar to a Fronty water manifold fed by a water hose tapped off of the standard water inlet casting. The more I think about it... the more I consider making an authentic Fronty water manifold to do the...

Last post

Similar in design as yours Kevin. Dick McKee years back had one that was like a block off plate but had the water porting like yours and the outlet like yours going to the water pump. Wish I had a picture, a very good design.

Hank

I pondered sumpin similar to this in revision 12, prior to my decision to lean toward a more correct Fronty...

7 Replies

449 Views

Last post by Kevin Pharis
Fri Aug 05, 2022 8:00 pm
NH Float mount ??

Last post by jwrightjr « Fri Aug 05, 2022 7:45 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Fri Aug 05, 2022 3:11 pm » in Classifieds - Parts

First post

Was someone on here wanting one of these? Has two rivets with it. Rivets are Al not copper with original, but should work. Found in some on my stuff. Email at address in pictures. Thanks Dan
3D6BF0A1-6EDA-42CB-8439-BAD5878DAA93.jpeg
8D547C16-0627-46A8-96BD-8B2A245BEA9D.jpeg
A6F24F4C-C63D-4AA0-AE6F-57475E2AF170.jpeg

Last post

Email sent

1 Replies

156 Views

Last post by jwrightjr
Fri Aug 05, 2022 7:45 pm
For sale Kelsey loose lug rims and fellows

Last post by Stephen_heatherly « Fri Aug 05, 2022 4:14 pm
Posted in Classifieds - Parts
Replies: 1
by pre15dale » Fri Aug 05, 2022 3:18 pm » in Classifieds - Parts

First post

FS 5 Kelsey loose lug rims, 4 fellows and 16 lugs. I think they are 88's $350.00 plus shipping. I have not figured out how to post pictures but can text them

Last post

Email sent

1 Replies

143 Views

Last post by Stephen_heatherly
Fri Aug 05, 2022 4:14 pm
FS HOOD SHELF SET (09-16)

Last post by Mark Chaffin « Fri Aug 05, 2022 3:00 pm
Posted in Classifieds - Parts
Replies: 5
by Mark Chaffin » Thu Aug 04, 2022 11:01 pm » in Classifieds - Parts

First post

Hood shelf set (09-16) new in the original packing $30.00 plus $16.59 domestic shipping. Mark Chaffin (951) 805-0928

20220804_160119.jpg

Last post

Thank you for your interest. Back on the market!

5 Replies

263 Views

Last post by Mark Chaffin
Fri Aug 05, 2022 3:00 pm

Search found 280 matches

Go to advanced search