MTFCA Forum

Looking for some photos of period signage that would have been used on any type of delivery vehicles 1900-15. Horse drawn wagons are fine as well. Looking for some ideas and styles to get a layout for my delivery car project.

This 1931 Model A Tudor was owned by a gentleman who suddenly passed last year. I am trying to sell it for his wife. Needs work but not dents on the body. I have no idea about the engine. $10,000. Located in Bullhead City, Arizona.

Steve has moved out of his house and into Winfield Rest Haven.

If you wish to call him or send him a card he would be most appreciative.

I have a set of 5 brass T wire wheel hub caps & a set of brass, early block FORD caps available - $100 a set + the ride. Photos on request.

Hi….Is anyone rebuilding brass carburetors?

OK. I have a silly question.

I have a '27 touring that I am putting new glass and rims on.
They also need the rope seal replaced. One side was missing the other side just peeled off.
What was used to keep the seal in place? Where they built facing up so they really didn't need any stick'em?
Any ideas would be great.

Thank you

Steve B.

Right now, model T cars, a lot of them in beautiful condition, rebuilt motor and transmission, new tires, new radiator, new upholstery, new top, ruckstell and Rockies, going for UNDER $ 10,000.
What is going on? I am talking about the highly desired brass models. In the last few years, the 1925 and 1926 models have been hot, but the in between...

I recently acquired a beautiful 1910 Holley 5 ball and getting ready to try it out. Many thanks to Kim for offering it to me. I'm interested in hearing from others who have run these carbs. How do they perform? How are they primed before starting? Any tips, suggestions, etc. appreciated.
image0.jpeg

All these switches are used.
Number 1, 2 & 3 are 1919-1925 .
Number 1 sale pending to Rick
Number 3 sale pending to Ed
Number 4 is a 1927(sold to Shannon)
$30 each plus shipping
Brackets are $10 each plus shipping
I accept PayPal Friends/Family or check use the Forum to email or PM me if interested

Buttom #1.jpg
-
button #2.jpg
-
button...

IMG_3843.jpeg IMG_4210.jpeg IMG_4145.jpeg IMG_4187.jpeg

Hi,
I bought a spare tire for my Roadster. One spoke looks bad, 3 others do not look good.
Therefore I want to remove these 4 spokes, to see, if I could fix them with glue.
Could you please give a hint how I could remove the first spoke without destroying it.
I think if the first spoke is removed, to remove the others should not be a challenge....

Large estate Auction November 22, 2025 of early Model T cars, parts, tools and equipment. Google Sam Cipriano Estate Auction for listing and bidding information. This will be the first auction of three of Sams extensive collection of early Model T parts, cars, bodies, etc.

At the local Wal Mart, the little square sticks at the checkout counter to divide one customer's stuff from another's seem to be gone. Are we, the Public, now considered to be too unstable to have access to such things?

Completely disassembled and cleaned, new float, float valve, venturi, choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushing installed, test run. $325 postpaid to continental USA email: wlkma9@gmail.com

Hi all, I have this great truck conversion chassis free to a good home. Very nice condition, you can still see the pinstripes on the side of the frame.
20251017_123950.jpg

Comes with.lots of extra t parts. Fenders, touring car doors, wooden wheels, all free!

Does anyone have CAD files of the T engine and its associated parts? I am interested in making a 3D printed replica (not life size, much smaller); mainly for educational purposes. I like the idea of being able to have a little plastic engine that functions a little bit for demonstration purposes.

Good evening! I rebuilt my '13 engine this past spring and had cause to pull it again to fix a couple of things (one of my own mess-ups and one from another guy). The main bearing caps caught my eye as two seem narrower than they should be. Plus, there are a couple of gaps that concern me. Someone else who rebuilds Model T engines did the...

So, there are a few rim manufacturers out there that will roll new lock ring rims, but only 1 of them makes the actual lock rings. They are a custom hot rolled steel profile that gets rolled to mate up to each rim diameter. 2 profiles are traditionally available, “heavy” for the larger cars, and “light” for our more nimble autos.

As my luck...

I have a lazy, drooping outside door handle on a 27 coupe. Is there a way to rebuild the door opening/locking mechanism by replacing a spring, or do I need to replace the whole assembly? If my assembly can be repaired, how difficult a job is it?

I have reproduced the Lejay Hi Ball Fencer charger kit.
It will make a great addition to your workshop and a great conversation piece.
The kit includes all new parts and full instructions for assembly.
The DIY kit IS $29.95 plus postage of around $10.00
The complete unit is available for $64.95 installed on your coil. Your coil will be refinished...

What are the road rules for Model T's and other vintage cars in the state of Pennsylvania? May be moving there someday and Id like to know what I have to look forward to.

A guy is selling a wipe on patina in a can for about $160 per quart.
It is suposed to bring back the shine, protect the rusty surface, and remaining finish from further damage.

Is this stuff really worth it?
Linseed oil?

The driver lost control of his car on a grade and plunged 50 feet to the creek below, June 29, 1921. He died three days later from injuries sustained in the accident.

Gee, am I glad that I bought my Stromberg OF-1 carburetor, just a year or two ago when they were reasonable. Current listings for them on EBAY and elsewhere, make me think sellers are planning on retiring on their sale income.

If anyone had Les' email or if you see this Les, please email me about Patterson gears.

Some KW. Some Ford. Only $50 Gently used. + free delivery lower 48. gwhouse731(at)gmail(dot)com

Rocky Mountain Brake parts for 1909-25 rear axle. Everything shown in the pictures.

There is only one brake band and it looks decent and the lining looks to still have some life left in it.

The mounting brackets are usable. One has a groove worn in it probably from a brake band or wheel coming loose. The other one has been ground on a little....

Set of 3 1909-25 removable ear transmission bands.

$30 plus shipping in the U.S.

IMG_8264.jpeg

IMG_8265.jpeg

IMG_8266.jpeg

IMG_8267.jpeg

Yesterday I was pouring about a dozen 4th mains to bore out. I came across about 3 that had no oil hole in them. Were these early ones before Ford found out they needed the oil hole?
Think I have seen one more that I remember.
Inquiring minds want to know. Dan

Here are some actual early photos from my collection. Feel free to screen grab 🙂
IMG_2144.jpeg IMG_2146.jpeg IMG_2147.jpeg

I have a 25 roadster and am looking for a pickup box. (25 preferable) Most of the ones I see are pretty rough. I really don’t have any idea how much they are worth. I just looked at one but it needs a ton of work. Any advice on value, condition, etc would be much appreciated. Thanks, Ray

What's the best headgasket steel or copper?

What do you know about Sterling Spark plugs? I picked a set of eight up, still in the box and they are in very nice shape. They look a lot like a straight side Champion x. They are marked 1/2 inch for fords. From what little research I've done, I can't find much about them. Other than the fact that they're antiques spark plugs, which is kind of a...

For Sale, Crankshaft fan pully... Adjustable crankshaft fan belt pulley, 3-3/4 diameter, 1917-27. $40 plus shipping
pully1.jpg
pully2.jpg
pully3.jpg

Here’s a Facebook Maketplace listing I saw today and I know nothing about the Truck or the owner than what’s on Facebook. He’s asking 4900.00 for it and may be to much since it’s not running but it’s not a rusted up back fourty find. Seems to be all there ?.
Anymore information wanted contact the owner through Facebook

I have just finished assembling 3 mufflers to take to next weekend's Bendigo Swap meet.
The ends are metal spinning. The brackets and deflectors are laser cut duplicates of originals.
The centre pipe is standard T exhaust pipe, but the first two inches is expanded so the original pipe will slide into it. This creates a shoulder, up to which the...

Hi all,
I've been driving my 25 Touring a bit and have to pretty much hold the wheel tightly all the time. I looked under the engine and noticed that one of the radius rod arms has a very slight bend in it. Possibly from a long ago accident I assume. Would that have a lot to do with the car's tracking problem? Also is there a way to straighten the...

Bosch Distributor for sale. This came with a bunch of T parts I just bought and I’ve never run a distributor on my T’s so I don’t know much about it.

The shaft turns, the cap has a couple little chunks missing but should still work. The rotor looks good. It looks like the body of the distributor has had some damage in the past and look to have...

This Klaxon horn is about 11 long, 6 tall and 4 wide. It has the mounting bracket and a nice original Klaxon plate. Really nice original and blows LOUD! Price is 185.00 including FedEx Ground shipping with insurance in the USA. I don't check messages here but call me at 734-730-4274 or email me directly at motoringicons@hotmail.com Thanks.

A large and early triple horn that is 11 tall and about 6 wide. It is made by SMA Le Cyrano, Paris. It is in excellent condition and an older restoration. It was clear coated years ago. This is a great brass horn that would date from about 1905 to 1911ish. It could be used for a larger American or European automobile. The price is 500.00 including...

I bought these unfinished from a gent. I'm not going to use them just wanting my money of them 100$ plus s&h they are stainless need finishing what you see is what I have

For Sale: Ford Service Manuals. These are original hard cover books. It is like the modern reprint but a little larger and the pictures are much clearer. In very good condition. I have 2 books, one dated 1925 the other dated 1926, both are in similar very good condition. $70 each plus $7 media rate USPS postage in USA. Personal check preferred....

Brand New 6 Volt Model T Starter Field Coils and everything needed to install them.
$59 + shipping (usually under $10) - Compare at OVER $100 for the Wilsons

These are also Epoxy dipped with plastic insulators between the fields and will likely last well over 100 years.
Note - the post is Silver Soldered and pre-installed

I have ONE 6v starter I built that a customer ended up not needing that I can ship right now - no waiting.

Best Possible quality rebuild.
PRICE DROP! $325!!

Now that I make literally every part in these units except the housing and the armatures, I can pass some savings on to everyone.

New field coils with silver soldered post (yes, I now make...

Building a 1914 speedster with a brass vee radiator and a dropped front axle. How many leaves can you remove from the front spring and still be safe? The bottom spring leave has been dearched some not sure how much..

For the rear spring how many leaves can be removed safely to lower the frame without Zeeing or cutting the frame. I'm using a 13/14...

FS. 09/10 double twist brass horn with cover. New screen, repro reed and repro brass adapter tube. Tube wrap is correct oval vs round and has horizontal inlet vs angled. Excellent show condition,, has no mfr. stamped name, otherwise identical to Rubes or Nonpariel. $700.00 plus freight.
Scott. Text or call 513 three seven eight 4235 or...

Model T ball cap re-babbitted and bored to Standard or you specified diameter ...price is $50.00 + exchange + $19.30 priority flat rate mail in lower 48 states or actual postage outside this area or INTERNATIONAL ...Gene French 970-581-2808 or gfrench1953@hotmail.com
ballcap.jpg

Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $110 + $19.30 postage in lower 48 states ...actual postage outside this area ...Gene...

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $110 plus $19.30 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Babbitt bearing mold for model A Ford mainbearings … this mold will pour both the block and caps in the model A engine … mold pours bearings at 1 1/2 diameter to allow material for finish machining to standard or any reasonable undersize crankshaft sizes … written instructions are included as are my email or phone support … price $175.00 + $19.30...

Hello,
I need another 1912 front fender iron. Preferably the one with the eyelet or no cutout at all (i.e. I'll drill it myself)
If you have one, please let me know. Thanks!

Well I finally got to installing my new copper head gasket and my new (to me) head...and of course one of the head bolts stripped in the block.

I had cleaned out all the holes and ran a tap through them to clean up the threads beforehand. I also checked that the new bolts were not too long for the holes. Many of the holes had already been...

I have a stromberg of which i bought from one of the rebuilders and never used .project is now gone so i will let it go for $550 including shipping to 48 .can text pictures

Scintilla Magneto Ignition switch. Good chance this is an aircraft switch but would look great in the dash of a speedster. Switch moves nicely with good positive detents. Measures about 3.25” diameter.

$75 plus shipping in the U.S.

IMG_8250.jpeg

IMG_8251.jpeg

IMG_8252.jpeg

IMG_8253.jpeg

Bead breaker for clincher tires, It says Pat applied for USA & Canada.
$80 plus $22 shipping in the lower 48. Text or call is the best form of contact for me.
423-2eight4-9750
IMG_3403.jpeg IMG_3402.jpeg

For sale: spindle body and arm $50 plus postage

20250829_182159.jpg 20250829_182144.jpg 20250829_182208.jpg

For sale: I have 2 fatman steering wheels. 1st one is a Bauer and the 2nd one is a Spencer. Wood is very good condition. Have not done any cleaning or polishing so you can make it what you want. Have a key for the Spencer. They are $500 each plus postage.
20250821_230246.jpg 20250821_230040.jpg 20250821_230013.jpg 20250821_233019.jpg...

For sale: Rayfield carburetor and intake manifold $350 plus shipping
20241024_120832 - Copy.jpg
20241024_120858.jpg
20241024_121000.jpg
20241024_121203.jpg

New price is $300 plus shipping

for sale: original exhaust manifold with lovers. very good condition. $200 plus freight
20230225_173929.jpg 20230225_173944.jpg 20230225_174000.jpg

I have a foam filter, aside from not looking right, most of the antique air cleaners ive seen go up and towards the exhaust. If anyone is selling one per chance I'd love to buy it.

Edit: I am open for any old cyclone type filters, even off an old tractor or something, I say that cause some of the cleaners I was offered get pricy, don't doesn't...

I’m missing a few of the inserts for these top snaps that go into the rear top bow on my touring. Any idea on what these are called and where to get replacements?

For sale EMCO cast iron muffler with cutout. EMCO model F muffler and cutout was painted with hi temp header paint. Cutout valve operates smoothly, lubricated with anti-seize hi-temp paste. Inlet measures 2-inches inside diameter and outlet measures 1-5/8 inch inside diameter. Muffler has two mounting screw. Price $250. plus shipping. Call or text...

From years back.., keeping my word to assist in the parts that do not exist. Installing a Vega Steering Box, High angle wedge for the column drop, and custom billet aluminum windshield stanchions. Posting this to show others how to do it. The key in making these, you must use a variable speed metal capable band saw at half speed, canning wax as a...

For Sale Cantrell Rear Axle Outer Sleeve Puller. Threads are in good shape and lever for sleeve engagement operates smoothly. Small lever operates pin to engage sleeve, center screw pushes against axle to extract sleeve. Tool is lightly marked Cantrell on side. Price $225. plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

IMG_3911.jpeg IMG_3910.jpeg IMG_3909.jpeg IMG_3912.jpeg

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

For sale early left and right headlight forks marked (DB) Dodge bros. and raised part numbers. Forks are in nice condition with good threads and nuts. Price $250 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

2025 production was largest number ever and yet I am down to my last few, so do not delay if you're considering purchasing one...I anticipate they'll be gone in a week or two.

there will be no more made until March 2026 - winter weather permitting (my shop gets COLD!!)

EMAIL ME DIRECTLY OR THROUGH THE FORUM - PLEASE NO PM'S

thank you

My dad and I restored this 1909 Touring between 1970 and 1977. He purchased the original chassis and body in the 1960s but I don’t have an exact date. I was still in my teens when we completed the build so I don’t have specifics or a full list of parts that were needed to complete the car. I know he shipped the wheels to someone in CA who...

Just starting this month’s thread.

And I swapped the trickle charger from the ‘27 to the ‘14. ;)

Eric

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

FS Fork mount headlights

$100 plus shipping

For Sale a pair of Essex headlights.

$200 plus shipping

For sale 1911 Kingston, five ball carburetor, very clean reconditioned float. $1500 plus shipping to lower 48. The best way to reach me is through text message. My number is 419-217-8884.

All parts for one price.
TT dash switch plate mount,
1915-16 headlight push pull switch.
Starter switches.
Dash light.
Horn buttons one rotates I’m guessing for dome light ? The other one is button and bracket only
Model A starter switch.
Center Horn button / steering wheel nut.
$80.00 + plus shipping. 423=2eight4-97fifty
Postal money order,...

Really neat vintage cable driven Reliance Tachometer. Reads 200-2400 RPM. Good range for a T engine. Overall diameter is about 5”. Looks like nickel plated, should polish up nice. Takes a 1 1/2 to 1 drive. I spun it gently with a drill and the needle moved. Would look great in a speedster!

SOLD! $100 plus shipping in the U.S.

IMG_8237.jpeg...

Anyone ever seen a radiator like this or have a clue on who may have manufactured it?

IMG_5124.jpeg

For sale
Sold New 26-27 roadster short grain side curtains with storage bag. $350.00 plus shipping.
Jim B.

There are no historical references to early November 1905 in Ford history, but 120 years ago, the future of Ford Motor Co. was about to change forever. And Henry Ford, CFO James Cousins, C. H. Wills nor any other Ford Motor Company figures were involved.

Ford Motor Co. had just finished an incredibly successful fiscal year (Oct 1, 1904-Sep 30,...

Interesting design accessory Horn that has a “push lever” to make a loud signal. Brass bell and black painted housing with bracket that mounts on the Fake door of a touring or roadster body. $250.00 plus shipping. Lang’s 1-800-872-7871

Rare Holley 4500 Carburetor used in 1911. Excellent restorable SOLD
Lang’s 1-800-872-7871

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $2350.00 plus shipping.
Lang’s 1-800-872-7871

1913-1914 Reproduction Aluminum Hood $275.00 plus shipping. New they are $425.00
Lang’s 1-800-872-7871

here is the base of a 5 ball carb complete as shown. $250 postpaid.

I have a 1940 Chevy truck that I allowed to sit to long and now the clutch is stuck, This happened last year also but it freed up quick just by warming up the truck and driving it with the clutch pedal pushed in. This time it didn't work. Any ideas on how to get to come loose?. Oh, I'm try to swap it off for a 64 to 68 Mustang for my wife if there...

Am now making flappers for the Simmons carburetors! Our prototype is complete and is working excellent! We’ve installed the carb on a 1926 model T and he results are an engine that now isles at just under 100 RPM’s! If interested message me at 412-354-2843 text only. I’ll send a video of this engine in operation! We will be manufacturing the...

Hi everyone, Is he still on the forum?…….I am missing the ultra thin hexnut on my steering wheel tilt accessory….Thanks

Hello fellow Ford Model T lovers!

Seamus Hnat here...After nearly 10 years servicing and restoring some of the worlds finest cars at Stahls Auto Collection, I am excited to announce that I'm now opening up my home shop for full-time service to everyone in the hobby and those that we hope to attract to this wonderful hobby too! Instead of working...

New float, viton tipped needle and seat conversion, new choke spring, reconditioned spray needle, throttle shaft bushing installed.
The original throttle arm/shaft and petcock were missing so I used a modified Holley G throttle shaft and Kingston L2 drain valve.
$400 postpaid to continental USA email: wlkma9@gmail.com