MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 217 matches

Topics

Replies

Views

Last post

#22 is home

Last post by big2bird « Tue Dec 09, 2025 6:26 pm
Posted in General Discussion Forum
Replies: 19
by Gleaner » Fri Dec 05, 2025 7:03 pm » in General Discussion Forum

First post

I purchased Model T serial number 22 from Aardeen Vaughn this week and just got the car home today. Many years after use the body was taken off and a child’s herse body was put on the car. I have a 1911 project so I also bought the herse body and will put that body on. The wood carving on the herse is a work of art. Mr. Vaughn put a new body on...

Last post

That thang just needs a starter, generator, water pump and distributor !!………….

…Just funnin, of course. That’s the most beautiful T I’ve ever seen and could stand and look at it for hours. Thanks for sharing. :D

… and an outside oil line ! ;o)

munster-1.png

Combine them. LOL

19 Replies

925 Views

Last post by big2bird
Tue Dec 09, 2025 6:26 pm
Startermotor on a Openvalve Engine

Last post by Wayne Sheldon « Tue Dec 09, 2025 6:16 pm
Posted in General Discussion Forum
Replies: 15
by ABoer » Tue Dec 09, 2025 5:58 am » in General Discussion Forum

First post

Hallo model T friends ;
A club member asked me or it is possible to put a startermotor on a Openvalve Engine .
Thank you for your answer
Toon

Last post

The problem that has happened all too often with temporarily replacing a very early engine in a very early car with a later engine for the convenience of a starter, is that sometimes the car later gets sold and the engine does not go with the car. Sometimes this is due to whoever manages the estate sale didn't know about the engine belonging to...

15 Replies

346 Views

Last post by Wayne Sheldon
Tue Dec 09, 2025 6:16 pm
HCCT questions, wiring/terminals.

Last post by Henry K. Lee « Tue Dec 09, 2025 6:12 pm
Posted in General Discussion Forum
Replies: 4
by Pep C Strebeck » Tue Dec 09, 2025 3:31 pm » in General Discussion Forum

First post

In finally getting around to fixing my coil tester I have a couple of questions for those more in the know that may have better knowledge than I do. The coil tester works as it should but the wiring is in need of help. Someone before me had been into to it to replace some of the wiring, bad vinyl wiring and plastic crimp-on terminals, while...

Last post

I have plenty of era correct wire terminals (heavy) in both closed and fork style eyes. Send me an email with quantity.

Hank

IMG_6026.jpeg

So old they have the wire sizes stamped on the back.

4 Replies

54 Views

Last post by Henry K. Lee
Tue Dec 09, 2025 6:12 pm
WTB These Bearings, Bill Everett

Last post by Daisy Mae « Tue Dec 09, 2025 5:54 pm
Posted in Classifieds - Parts
Replies: 1
by Bill Everett » Tue Dec 09, 2025 4:38 pm » in Classifieds - Parts

First post

I'd like to buy two (2) sets of front wheel ball bearings, or just one if that's all you have.

Please let me know what you have; please send picture and how much $$ you'd like.

Thanks.

Bill Everett Model T Ball Bearing Set.jpg Model T Ball Bearing Set.jpg

Last post

Contact Chaffin's to see if they have any, they've sold several sets here recently.
Also I bought a set from Lang's a while ago.
These type bearings are not being made, and remaining stocks are not sufficient to advertise, you'll need to call the vendors & inquire. Good luck!

1 Replies

82 Views

Last post by Daisy Mae
Tue Dec 09, 2025 5:54 pm
FS MISCELLANEOUS PARTS

Last post by ModelTWoods « Tue Dec 09, 2025 5:52 pm
Posted in Classifieds - Parts
Replies: 13
by Mark Chaffin » Mon Dec 08, 2025 6:21 pm » in Classifieds - Parts

First post

Miscellaneous parts as described below. Prices are as indicated. Domestic shipping will be $8.50 USPO Priority Flat Rate. Combine items and save on shipping. Mark Chaffin (951) 805-0928

20251208_135502.jpg
Front outer wheel bearing sets $45.00 per set / SOLD

20251208_135754.jpg
Good steering pitman arms $40.00 each.

20251208_135939.jpg...

Last post

Fuel filter and pressed steel muffler, from other Ad held for Terry.

Mark, Tried to call at 4;45 PM Central time ( 2:45 ) Pacific, today. Got no answer. Checked phone number and it was correct. I'll keep trying. Terry

13 Replies

491 Views

Last post by ModelTWoods
Tue Dec 09, 2025 5:52 pm
Help received from a Simmons/Wizard carb owner - THANK YOU

Last post by Scott_Conger « Tue Dec 09, 2025 5:40 pm
Posted in General Discussion Forum
Replies: 2
by Scott_Conger » Tue Dec 09, 2025 4:40 pm » in General Discussion Forum

First post

I foolishly sold my last complete Wizard awhile ago, and now cannot find my sketch of the adjuster needle - I have some basic measurements but not a couple details that I'd like to have.

Here is a new adjuster needle and I would like someone with an AUTHENTIC Wizard carb that isn't on their car to please compare the visual of my needle to...

Last post

Joseph

Message received and THANK YOU!!!

2 Replies

54 Views

Last post by Scott_Conger
Tue Dec 09, 2025 5:40 pm
FS SPEEDSTER HEADLIGHT BRACKETS

Last post by Mark Chaffin « Tue Dec 09, 2025 3:03 pm
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 3:03 pm » in Classifieds - Parts

Speedster headlight bracket set $20.00 plus $8.50 shipping. Send me a text or PM with your want and information. Mark Chaffin (951)805-0928

20251209_115909.jpg

0 Replies

84 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 3:03 pm
FS CRANK HANDLE

Last post by Mark Chaffin « Tue Dec 09, 2025 2:39 pm
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 2:39 pm » in Classifieds - Parts

Nice late style crank handle. Usually, the handles are frozen and do not turn. This one works as it should. Price is $25.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_111220.jpg

0 Replies

89 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 2:39 pm
FS LICENSE PLATE BRACKET LOT (SOLD)

Last post by Mark Chaffin « Tue Dec 09, 2025 2:31 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Tue Dec 09, 2025 12:30 pm » in Classifieds - Parts

First post

Assortment of license plate brackets $20.00 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

20251209_092725.jpg

Last post

Going to Charlie.

1 Replies

123 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 2:31 pm
FS EARLY FRONT SPRING PERCH SET (SOLD)

Last post by Mark Chaffin « Tue Dec 09, 2025 2:25 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Tue Dec 09, 2025 1:25 pm » in Classifieds - Parts

First post

Early front spring perch set with oil holes. Price is $75.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_101756.jpg

20251209_101812.jpg

Last post

Going to Perry.

1 Replies

97 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 2:25 pm
WTB Horn button bracket

Last post by 1922 t « Tue Dec 09, 2025 2:11 pm
Posted in Classifieds - Parts
Replies: 5
by 1922 t » Mon Dec 08, 2025 10:55 pm » in Classifieds - Parts

First post

WTB 1922 T horn button bracket to stering column.
With button swith if possible.
Thanks Larry

Last post

Great thank you so much. Larry

5 Replies

200 Views

Last post by 1922 t
Tue Dec 09, 2025 2:11 pm
Tube Size Question

Last post by Scott_Conger « Tue Dec 09, 2025 2:01 pm
Posted in General Discussion Forum
Replies: 26
by mortier » Sat Dec 06, 2025 6:51 pm » in General Discussion Forum

First post

Will 30 X 3-1/2 tubes fit 30 X 3 tires? I ordered those two tire sizes for my 1915 T, but all four tubes they sent are marked 30 X 3-1/2.

Last post

Pre-order 2500 or more washers at $30 each and watch them appear.

26 Replies

593 Views

Last post by Scott_Conger
Tue Dec 09, 2025 2:01 pm
1920 Chevy Touring Car 490, Not a T.

Last post by Fozz71 « Tue Dec 09, 2025 1:34 pm
Posted in Classifieds - Vehicles

by Fozz71 » Tue Dec 09, 2025 1:34 pm » in Classifieds - Vehicles

I realize this is not a Flivver, but my hopes are to finance a T. So, if anyone is interested in a solid and running 1920 Chevy time-capsule, here is a great candidate. Runs and drives and mostly original. Located in Oswego, Illinois 6306083978. Asking $8500 obo. Newer (1990s) roof, upholstery, wiring, and clutch leather. Tires hold air but are...

0 Replies

81 Views

Last post by Fozz71
Tue Dec 09, 2025 1:34 pm
FS HARTFORD SHOCKS PARTS LOT

Last post by Mark Chaffin « Tue Dec 09, 2025 1:34 pm
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 1:34 pm » in Classifieds - Parts

An assortment of very hard to find Hartford shock parts. Price is $300 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

20251209_101003.jpg

0 Replies

103 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 1:34 pm
FS FAN BRACKET 26/27

Last post by Mark Chaffin « Tue Dec 09, 2025 1:32 pm
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 1:32 pm » in Classifieds - Parts

Fan bracket / water outlet in good condition $25.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_094118.jpg

20251209_094127.jpg

0 Replies

57 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 1:32 pm
FS MOTOR MOUNT CAP LOT NOS

Last post by Mark Chaffin « Tue Dec 09, 2025 1:29 pm
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 1:29 pm » in Classifieds - Parts

Ten motor mount caps NOS. $20.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251209_100011.jpg

0 Replies

83 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 1:29 pm
FS FLOORBOARD RISER SET

Last post by Mark Chaffin « Tue Dec 09, 2025 1:27 pm
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 1:27 pm » in Classifieds - Parts

Floorboard riser set. Price is $25.00 plus $18.50 domestic shipping. Mark Chaffin (951)805-0928

20251209_094315.jpg

0 Replies

92 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 1:27 pm
WTB EARLY RECTANGULAR TRANSMISSION INSPECTION COVER

Last post by JTT3 « Tue Dec 09, 2025 12:32 pm
Posted in Classifieds - Parts

by JTT3 » Tue Dec 09, 2025 12:32 pm » in Classifieds - Parts

Looking for the inspection plate for a 1910 hogshead.
Best John

0 Replies

70 Views

Last post by JTT3
Tue Dec 09, 2025 12:32 pm
I Want to Buy Your Item: Call Me...

Last post by TXGOAT2 « Tue Dec 09, 2025 12:30 pm
Posted in OT - Off topic
Replies: 8
by Jerry VanOoteghem » Mon Dec 08, 2025 12:16 pm » in OT - Off topic

First post

Just an observation I've made lately with regards to items in the Classified section, be it for cars or parts. It seems often times these days when an individual is interested in buying a certain item, they will reply to the ad by asking to be contacted by the seller. WHAT?? If you want to buy an item, why on Earth would you make the seller come...

Last post

...Might prove to be a real slow pay.....

8 Replies

177 Views

Last post by TXGOAT2
Tue Dec 09, 2025 12:30 pm
FS EARLY COIL ASSORTMENT

Last post by Mark Chaffin « Tue Dec 09, 2025 11:55 am
Posted in Classifieds - Parts

by Mark Chaffin » Tue Dec 09, 2025 11:55 am » in Classifieds - Parts

An assortment of early distributor coils. Price for all $50.00 plus actual shipping. Mark Chaffin (951)805-0928

20251209_085241.jpg

0 Replies

140 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 11:55 am
FS horn button

Last post by Karl Von Neumann « Tue Dec 09, 2025 10:40 am
Posted in Classifieds - Parts
Replies: 4
by Karl Von Neumann » Thu May 22, 2025 1:41 pm » in Classifieds - Parts

First post

Horn button missing the button inside part isn't pretty probably needs to be replaced as well 25$ shipped

Last post

Move to top

4 Replies

2240 Views

Last post by Karl Von Neumann
Tue Dec 09, 2025 10:40 am
FS- STEWART SPEEDOMETER GEAR

Last post by brassford « Tue Dec 09, 2025 10:39 am
Posted in Classifieds - Parts
Replies: 4
by brassford » Tue Nov 18, 2025 4:41 pm » in Classifieds - Parts

First post

Nice 2301 Stewart drive gear 16Tooth 8 pitch. NOS? The dealers are $32.95 + shipping, how does $28 delivered in the states

Last post

Sold pending payment,

4 Replies

610 Views

Last post by brassford
Tue Dec 09, 2025 10:39 am
wobbly front wheels

Last post by Dan Hatch « Tue Dec 09, 2025 9:48 am
Posted in General Discussion Forum
Replies: 38
by fireheadman » Sat Oct 18, 2025 10:05 pm » in General Discussion Forum

First post

Was driving down my neighbors driveway.... which has a couple dips and crowns on the asphault.
Speed was maybe 5-7 mph and all the sudden the front end started to shimmy side to side, like the front wheel were wobbling.

I slowed down and this allowed for the T to correct itself.
Since this was my third time driving her... I'm not sure if this is...

Last post

Here is what it should be. Have not seen a really good axle in many years. You may have a unicorn.
IMG_1173.jpeg

38 Replies

1753 Views

Last post by Dan Hatch
Tue Dec 09, 2025 9:48 am
2026 BAKERSFIELD SWAP MEET Vendor Registration Form

Last post by Mark Chaffin « Tue Dec 09, 2025 9:39 am
Posted in General Discussion Forum
Replies: 6
by NorthSouth » Sun Nov 23, 2025 10:46 am » in General Discussion Forum

First post

-
2026 Bakersfield, Brass – PreWar Swap Meet
-
Registration Form, Flyer, and Vendor Space Map.
-

Last post

Steve and crew did an outstanding job last year. I know Bill Bennett would have been proud. Looking forward to this coming year. Dad and I will be bringing a load of parts this time. Thank you Steve and all for your efforts. Much appreciated. :)

6 Replies

587 Views

Last post by Mark Chaffin
Tue Dec 09, 2025 9:39 am
MEME of the week

Last post by ironhorse « Tue Dec 09, 2025 9:07 am
Posted in OT - Off topic
Replies: 67
by ironhorse » Tue Mar 11, 2025 9:26 am » in OT - Off topic

First post

Screenshot_7-3-2025_10813_www.google.com_.jpeg

Last post

bear.jpg

67 Replies

24237 Views

Last post by ironhorse
Tue Dec 09, 2025 9:07 am
3D Printer

Last post by Tbird « Tue Dec 09, 2025 7:35 am
Posted in General Discussion Forum
Replies: 8
by Ralph F » Sun Dec 07, 2025 9:15 pm » in General Discussion Forum

First post

Has anyone here on the forum using or considering us a 3D Printer to make patterns for casting parts.
Fitz

Last post

Thanks for sharing your knowledge with me. My next question is what cad program do like to use or would suggest?
Fitz

Fitz,
Depends on what you’re wanting to spend. There’s some free stuff out there, but it’s limited. Also are you using a windows platform or Mac? I’ve noticed though there has been a shift to online apps now that you have to pay...

8 Replies

464 Views

Last post by Tbird
Tue Dec 09, 2025 7:35 am
Wood Seat Frame WTB

Last post by Tbird « Tue Dec 09, 2025 6:59 am
Posted in Classifieds - Parts
Replies: 2
by Tbird » Mon Dec 08, 2025 8:16 pm » in Classifieds - Parts

First post

Looking for a wood seat frame. They have rounded front corners. I just need the frame. Springs/strap springs would be a plus. What do you have?

IMG_4087.jpeg IMG_4086.jpeg IMG_4085.jpeg IMG_4084.jpeg IMG_4083.jpeg

Last post

I don't recognize that style.
What do thay fit?
Style, size, and shape does vary

The one pictured is from a 1911. I’m making my own seat frame.

2 Replies

153 Views

Last post by Tbird
Tue Dec 09, 2025 6:59 am
fan bracket

Last post by Melba Nolan « Mon Dec 08, 2025 11:37 pm
Posted in Classifieds - Parts

by Melba Nolan » Mon Dec 08, 2025 11:37 pm » in Classifieds - Parts

for sale: Ford script #T 604 fan bracket $15 plus postage

314-575-7115 for pictures

0 Replies

73 Views

Last post by Melba Nolan
Mon Dec 08, 2025 11:37 pm
FS MUFFLERS (SOLD)

Last post by Mark Chaffin « Mon Dec 08, 2025 11:20 pm
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Fri Dec 05, 2025 6:26 pm » in Classifieds - Parts

First post

An assortment of mufflers as described below. Mark Chaffin (951) 805-0928

20251205_140843.jpg
Pressed steel muffler new with some light surface rust. Current retail price is $74.95. Get this one for $50.00 plus actual shipping. (SOLD)

20251205_141012.jpg
Cast iron end muffler new. In primer; however, has some shelf wear. Retail price is...

Last post

Pressed steel muffler going to Terry. Thank you

2 Replies

366 Views

Last post by Mark Chaffin
Mon Dec 08, 2025 11:20 pm
WTB Horn button bracket

Last post by 1922 t « Mon Dec 08, 2025 10:57 pm
Posted in Classifieds - Parts

by 1922 t » Mon Dec 08, 2025 10:57 pm » in Classifieds - Parts

WTB Horn button bracket for 1922 touring.
If possible with the switch and button.
Thanks Larry

0 Replies

60 Views

Last post by 1922 t
Mon Dec 08, 2025 10:57 pm
front fender brace

Last post by Melba Nolan « Mon Dec 08, 2025 10:35 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Fri May 02, 2025 1:46 pm » in Classifieds - Parts

First post

For sale: front fender brace (bracket) for 26/27 $20 plus shipping
20250325_182315.jpg

Last post

move to top

2 Replies

1468 Views

Last post by Melba Nolan
Mon Dec 08, 2025 10:35 pm
wheel spreader no longer needed

Last post by RajoRacer « Mon Dec 08, 2025 9:44 pm
Posted in Classifieds - Parts
Replies: 8
by Jim Byrne » Sun Dec 07, 2025 7:15 pm » in Classifieds - Parts

First post

I just found one thanks everyone for the reply's

Last post

One step I always do after tire mounting on a split rim is TO NOT inflate to full pressure (32 lbs.) until I've remounted the tire & rim back onto the wheel and bolted it back on !

8 Replies

429 Views

Last post by RajoRacer
Mon Dec 08, 2025 9:44 pm
How did you get your Christmas tree?

Last post by Marshall V. Daut « Mon Dec 08, 2025 9:32 pm
Posted in General Discussion Forum
Replies: 8
by KimDobbins » Sun Dec 07, 2025 1:42 pm » in General Discussion Forum

First post

Got ours in the 1925 pickup.

Last post

How I wish I had taken a picture when we bought our Christmas tree in 2004 while still living in Phoenix! Our Corvette was not the ideal vehicle for transporting a tree from the lot to our house. So, the only alternative for us was to put the top down on our 1928 Model A Phaeton (pictured sans tree) and have the tree ride in the back seat as a...

8 Replies

606 Views

Last post by Marshall V. Daut
Mon Dec 08, 2025 9:32 pm
FS HIGH SPEED RING AND WORM GEARS

Last post by Mark Chaffin « Mon Dec 08, 2025 6:30 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Mon Dec 08, 2025 6:17 pm » in Classifieds - Parts

First post

I have two sets of Ton Truck High Speed ring gear and worm gears. One comes with a complete Ruckstell differential assembly. Both appear to be in very good condition. The ring and worm gear set is $150 plus actual shipping. The Ruckstell differential, ring gear and worm gear set is $250 plus actual shipping. Pick up is preferred as shipping will...

Last post

Ring Gear and Worm going to Jim.

1 Replies

253 Views

Last post by Mark Chaffin
Mon Dec 08, 2025 6:30 pm
FS - 2 REPRO HUBCAPS

Last post by brassford « Mon Dec 08, 2025 3:52 pm
Posted in Classifieds - Parts
Replies: 4
by brassford » Tue Nov 18, 2025 3:07 pm » in Classifieds - Parts

First post

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other one. l don't think they have ever been used. dealers are asking $36.95 + shipping. $60 including shipping.

Enjoy Your Day!

Last post

To the top please

4 Replies

609 Views

Last post by brassford
Mon Dec 08, 2025 3:52 pm
Radiator /water pump

Last post by TXGOAT2 « Mon Dec 08, 2025 3:13 pm
Posted in General Discussion Forum
Replies: 12
by Oldrusty26 » Mon Dec 08, 2025 11:22 am » in General Discussion Forum

First post

Not to open a fresh can of worms on an old subject ( I’m going to anyhow ) I’ve ordered a new flat tube radiator for my roadster pick up from brass works , my engine currently has a water pump , question is , will the water pump restrict the cooling capabilities of the new radiator and should I remove it , or would it be ok to just leave it on ? I...

Last post

Henry Ford used water pumps whenever there was a practical need. Starting with the 1928 Model A, every Ford had a water pump. In 1932, Ford introduced a V8, and every one of them had TWO water pumps! All Ford V8s through 1953 had two water pumps.

12 Replies

306 Views

Last post by TXGOAT2
Mon Dec 08, 2025 3:13 pm
Warford ID plates

Last post by MikeG « Mon Dec 08, 2025 2:41 pm
Posted in Classifieds - Parts
Replies: 4
by ModelT46 » Wed Nov 19, 2025 3:28 pm » in Classifieds - Parts

First post

about 6 inches by 2 1/2

Last post

Darel, I'd like to have one please. Email sent. Thanks, MikeG

4 Replies

420 Views

Last post by MikeG
Mon Dec 08, 2025 2:41 pm
More fender bolts FS

Last post by Dan Hatch « Mon Dec 08, 2025 1:23 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sun Dec 07, 2025 5:37 pm » in Classifieds - Parts

First post

Here are 4 more fender bolts. $20 + shipping. See pictures. Email me by forum. Dan
IMG_4824.jpeg

Last post

Back to the top

1 Replies

275 Views

Last post by Dan Hatch
Mon Dec 08, 2025 1:23 pm
Fender U Bolts FS

Last post by Dan Hatch « Mon Dec 08, 2025 1:23 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sun Dec 07, 2025 5:30 pm » in Classifieds - Parts

First post

Here are 4 fender U bolts. $20 + shipping. See pictures. Email me by forum. Dan
IMG_4823.jpeg

Last post

Back to the top

1 Replies

208 Views

Last post by Dan Hatch
Mon Dec 08, 2025 1:23 pm
Early fender mount FS

Last post by Dan Hatch « Mon Dec 08, 2025 1:22 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sun Dec 07, 2025 5:27 pm » in Classifieds - Parts

First post

Here is an early fender mount with a u bolt. See pictures. $15 + shipping. Email me by forum. Dan
IMG_4821.jpeg
IMG_4822.jpeg

Last post

Back to the top

1 Replies

217 Views

Last post by Dan Hatch
Mon Dec 08, 2025 1:22 pm
W.T.B. FIREWALL TO FRAME BRACKET FOR 1915

Last post by Tparts « Mon Dec 08, 2025 12:28 pm
Posted in Classifieds - Parts
Replies: 4
by adenautomotive » Wed Dec 03, 2025 11:05 am » in Classifieds - Parts

First post

I need a pair of firewall to frame brackets to fit 1915 t

Last post

We have a pair $85.00 plus shipping. Lang’s
1-800-872-7871

4 Replies

290 Views

Last post by Tparts
Mon Dec 08, 2025 12:28 pm
Wanted: KRW pan jig rear fixture

Last post by RajoRacer « Mon Dec 08, 2025 11:48 am
Posted in Classifieds - Parts
Replies: 12
by RajoRacer » Mon Dec 01, 2025 6:27 pm » in Classifieds - Parts

First post

Anyone happen to have the rear cone mount, cone & shaft for a mint original KRW crankcase jig available ? I'll make it worth your while !

Last post

Thanks for those, also !

12 Replies

808 Views

Last post by RajoRacer
Mon Dec 08, 2025 11:48 am
Muffler wrap kit SOLD

Last post by Perry Goble « Mon Dec 08, 2025 10:49 am
Posted in Classifieds - Parts
Replies: 1
by Tbird » Mon Dec 08, 2025 9:46 am » in Classifieds - Parts

First post

09-17 muffler wrap kit
3 stainless steel bands and white material.
New $20 plus shipping.

IMG_4262.jpeg

Last post

I sent you a email . I what to buy your muffler wrap . Thanks Perry

1 Replies

148 Views

Last post by Perry Goble
Mon Dec 08, 2025 10:49 am
Ross steering box

Last post by Henry K. Lee « Mon Dec 08, 2025 10:22 am
Posted in General Discussion Forum
Replies: 9
by WorldChamp1914 » Fri Dec 05, 2025 8:59 pm » in General Discussion Forum

First post

Is Les Schubert still working on the reproduction Ross steering box?

Last post

If it does not turn in the direction you require, use a bell crank from a Jeep forward cab. Just follow the 90 degree rule of steering geometry in the push/pull at the attachment points. The internet has all of this.

9 Replies

667 Views

Last post by Henry K. Lee
Mon Dec 08, 2025 10:22 am
FS 1909 Touring #6233

Last post by debrick1234# « Mon Dec 08, 2025 9:38 am
Posted in Classifieds - Vehicles
Replies: 12
by sswam » Sun Oct 05, 2025 8:26 pm » in Classifieds - Vehicles

First post

My dad and I restored this 1909 Touring between 1970 and 1977. He purchased the original chassis and body in the 1960s but I don’t have an exact date. I was still in my teens when we completed the build so I don’t have specifics or a full list of parts that were needed to complete the car. I know he shipped the wheels to someone in CA who...

Last post

Hope all is well. We forgot to include phone number if you want to reach out to us. 920-471-9707 or 920-7373-3776.

Thanks
Rick and Deb Teegarden

12 Replies

4831 Views

Last post by debrick1234#
Mon Dec 08, 2025 9:38 am
Found a 26-27 headlight. Thanks

Last post by MotoBrew « Mon Dec 08, 2025 9:15 am
Posted in Classifieds - Parts
Replies: 4
by Reno Speedster » Sun Dec 07, 2025 9:13 pm » in Classifieds - Parts

First post

I am looking for a decent 1926-1927 headlight. Let me know what you have and need for it.

Last post

Langs has them. I had to replace one on my 27.

They also have a rebuilding kis in chrome and nickel. I used one of the nickel ones. It is a good kit but required me to slightly reduce the outer diameter of the reflector to get it to fit properly onto the head light bucket. I compared the original reflector to the replacement and the replacement...

4 Replies

205 Views

Last post by MotoBrew
Mon Dec 08, 2025 9:15 am
Starter Noise

Last post by A Whiteman « Mon Dec 08, 2025 1:46 am
Posted in General Discussion Forum
Replies: 8
by A Whiteman » Sun Dec 07, 2025 4:12 pm » in General Discussion Forum

First post

I recently reconditioned my starter.
It runs smooth and the shaft is straight and runs true (no bends or wobbles) on the test bench.

It installed nicely and when the starter button was pushed it engaged and cranked the engine well,

..... however ......

When the starter button is released (without the engine starting) it makes a bad 'graunch' as...

Last post

Thanks John, yes the starter is rewired and modified bus, we have been using this solution here for many years and across a lot of cars with no problems ... until this time ... :-0

8 Replies

280 Views

Last post by A Whiteman
Mon Dec 08, 2025 1:46 am
Are you in Winfield?

Last post by DHort « Sun Dec 07, 2025 11:31 pm
Posted in General Discussion Forum
Replies: 9
by Steve Jelf » Mon Dec 01, 2025 2:48 pm » in General Discussion Forum

First post

Here I am in the old folks' home, without a T. I haven't hand-started an old car since September 7, 2023. I've been wondering if I'm now physically up to the task. Probably so, but it would be nice to give it a try and see if I can still crank-start. Does anybody on the forum have a running T near or in Winfield, KS, that I could try to start? If...

Last post

I think someone should bring a T to the Winter Clinic and Steve starting it there will be one of the presentations.

9 Replies

1042 Views

Last post by DHort
Sun Dec 07, 2025 11:31 pm
Shout out to Snyder's and other Ohio T folks

Last post by Daisy Mae « Sun Dec 07, 2025 11:18 pm
Posted in General Discussion Forum

by Daisy Mae » Sun Dec 07, 2025 11:18 pm » in General Discussion Forum

Left the comfort of Florida's version of 58 degree cold to brave Ohio's snow & ice 10 degree version this past week.
I just wanted to thank all the Ohio T folks I met this week for their very warm hospitality, specifically Joe Bell, Bill Reep and Nathan Fahrni. (Tim Wrenn, sorry I missed you this trip!!)
Being in the area, I just had to make a...

0 Replies

247 Views

Last post by Daisy Mae
Sun Dec 07, 2025 11:18 pm
1909-15 Top boot covers for 7 Touribg cars

Last post by RGould1910 « Sun Dec 07, 2025 9:46 pm
Posted in Classifieds - Parts
Replies: 3
by Eric Edwards » Sat Dec 06, 2025 10:35 pm » in Classifieds - Parts

First post

New top boot covers with top edge flap as original in Colonial Vinyl fabric by Haartz
For 54 inch wide top bows’. $ 395 plus post
Edwards. 795 828 5405

Last post

My 12 is 54

3 Replies

331 Views

Last post by RGould1910
Sun Dec 07, 2025 9:46 pm
WTB……Ross Steering

Last post by Eric Edwards « Sun Dec 07, 2025 9:34 pm
Posted in Classifieds - Parts
Replies: 2
by WorldChamp1914 » Thu Dec 04, 2025 11:30 pm » in Classifieds - Parts

First post

Any original or reproductions out there?

Last post

I have what may be a Ross steering gear. I cab sevd a pic. Eric

2 Replies

343 Views

Last post by Eric Edwards
Sun Dec 07, 2025 9:34 pm
Ben's Model-T Pie Wagon [1911-1925]

Last post by fireheadman « Sun Dec 07, 2025 8:43 pm
Posted in General Discussion Forum
Replies: 104
by fireheadman » Mon Aug 11, 2025 1:02 pm » in General Discussion Forum
1

2
First post

May have the thread moved to a new location if a build location/section is created?
Otherwise, I plan on posting frequently here for any/all things related to this vehicle. Hopefully everyone enjoys the thread.

So here I go... (a more detailed intro)

This the start of a new project for me. It's been 4 decades in the making, just waiting for...

Last post

just a quick update... most of which is in this post:

Have to find my warmer days to do anything in the barn (way too cold right now)!
But feeling like I might have the wobbly wheels under control.

Might wait for a warmer day to crank her up to get the oil drained and put some thinner weight in for the winter months.

Oh, and finally got my...
104 Replies

7778 Views

Last post by fireheadman
Sun Dec 07, 2025 8:43 pm
Top mounts FS

Last post by Dan Hatch « Sun Dec 07, 2025 7:41 pm
Posted in Classifieds - Parts
Replies: 2
by Dan Hatch » Sun Dec 07, 2025 5:35 pm » in Classifieds - Parts

First post

Here is a pair of Roadster or Touring top mounts. One is bent some, but may be straightened. $10 + shipping. Thumb screws are wort that. Not reproduction. Email me by forum. Dan
IMG_4826.jpeg

Last post

Send me an email by the forum.
If you don’t know how, click the contact button below my name beside the post. Dan

2 Replies

214 Views

Last post by Dan Hatch
Sun Dec 07, 2025 7:41 pm
Used cars.

Last post by George House « Sun Dec 07, 2025 7:18 pm
Posted in General Discussion Forum
Replies: 10
by Dollisdad » Sat Dec 06, 2025 9:05 pm » in General Discussion Forum

First post

IMG_4498.jpeg IMG_4502.jpeg IMG_4531.jpeg IMG_4537.jpeg

Last post

I think that fenderless touring in the fifth photo invented the first ‘burn out.’ If the next photo (6th) is actually a Ford dealership, I find it odd that an aftermarket wood body TT is there.

10 Replies

614 Views

Last post by George House
Sun Dec 07, 2025 7:18 pm
Brass Steering Gear Quadrants, 2 Piece Timer Cover (SOLD)

Last post by Pep C Strebeck « Sun Dec 07, 2025 6:51 pm
Posted in Classifieds - Parts
Replies: 4
by Pep C Strebeck » Wed Dec 03, 2025 7:16 pm » in Classifieds - Parts

First post

Lot of 2 Brass Steering Gear Quadrants, used, not great(?). Also included is a Two Piece Timer Cover, has a couple of dings (please see photos), I am guessing it is reproduction. Also included is a reproduction oil can holder, brass plated steel.

The Steering Gear Quadrants, the first one is marked as being Dodge Brothers, no cracks or breaks but...

Last post

Going to John, thank you.

4 Replies

323 Views

Last post by Pep C Strebeck
Sun Dec 07, 2025 6:51 pm
Changing clincher tires

Last post by Allan « Sun Dec 07, 2025 5:21 pm
Posted in General Discussion Forum
Replies: 2
by Steve Jelf » Sun Dec 07, 2025 1:10 pm » in General Discussion Forum

First post

For most people, the first time is tough. That gives lots of us the impression that it's inherently unpleasant. If you're new to this game, don't be intimidated. With practice it becomes more familiar, and you learn some things to do and some things to avoid. The more you do it, the less you will dread it. A few suggestions:

1 Do it on the car,...

Last post

Steve's both sides of the tyre simultaneously is a great tip. it keeps the tyre irons away from the tube and avoids pinching. I would add a further tip. Buy and use proper tyre fitting lubricant to make the job that much slicker.

Allan from down under.

2 Replies

289 Views

Last post by Allan
Sun Dec 07, 2025 5:21 pm
VALVESTEM CAPS

Last post by Original Smith « Sun Dec 07, 2025 4:56 pm
Posted in Classifieds - Parts
Replies: 4
by brassford » Tue Nov 18, 2025 6:24 pm » in Classifieds - Parts

First post

3 really nice valve stem caps. Unfortunately I don't have the rim nuts the original nickel is in great shape! I hope someone can match these up and complete a set! $30 plus the ride
Enjoy Your Day!

Last post

I believe the correct name is dust cap. The ones you have are not for a Ford.

4 Replies

643 Views

Last post by Original Smith
Sun Dec 07, 2025 4:56 pm
Klaxon-20 6v horn question

Last post by Erik Johnson « Sun Dec 07, 2025 4:37 pm
Posted in General Discussion Forum
Replies: 8
by BillM » Fri Dec 05, 2025 10:47 pm » in General Discussion Forum

First post

Screenshot_20251205_214211_eBay.jpg Anyone know about this horn. It has 3 terminals and is marked 6v.
I was going to try it out in the shop. But thought I better ask for some advice first.

Last post

Before taking it apart, try decreasing the tension by loosening the jamb nut and rotating the motor an eighth of a turn at a time. I believe rotating it counter-clockwise decreases the tension.

8 Replies

253 Views

Last post by Erik Johnson
Sun Dec 07, 2025 4:37 pm
My 1910 Touring

Last post by RajoRacer « Sun Dec 07, 2025 3:35 pm
Posted in Classifieds - Vehicles
Replies: 5
by ModelT46 » Mon Nov 24, 2025 6:10 pm » in Classifieds - Vehicles

First post

I have terminated the pending sale of my 1910. The buyer took too long to come here to pick it up and settle. So I am going to keep it after now 79 years and as long as I have two feet of solid earth it will be in our garage. I bought it when I was 14 and I will be 94 on June 21 this coming year. That will be my 80th year with my beloved T. I will...

Last post

Darel resides in Minnesota.

5 Replies

1268 Views

Last post by RajoRacer
Sun Dec 07, 2025 3:35 pm
Crazy? tow question

Last post by TXGOAT2 « Sun Dec 07, 2025 3:15 pm
Posted in General Discussion Forum
Replies: 70
by varmint » Thu Nov 20, 2025 6:54 pm » in General Discussion Forum

First post

When you are driving along at speed and then put the Model T in neutral, so that it's coasting...the engine is turning but the rear wheels still going at speed, and this does not hurt the car?

Can't we flat tow the Model T in neutral with the engine running?

Last post

I figured it had leaked down into the crankcase. At least some of it didn't.

70 Replies

2103 Views

Last post by TXGOAT2
Sun Dec 07, 2025 3:15 pm
WTB- Sprague steering

Last post by WorldChamp1914 « Sun Dec 07, 2025 3:08 pm
Posted in Classifieds - Parts
Replies: 2
by WorldChamp1914 » Sun Dec 07, 2025 2:18 pm » in Classifieds - Parts

First post

Any out there?

Last post

I will email you, I have your father’s phone number, he’s difficult to get ahold of

2 Replies

141 Views

Last post by WorldChamp1914
Sun Dec 07, 2025 3:08 pm
SOLD Six MTFCA repairing and restoring manuals

Last post by KellyJons « Sun Dec 07, 2025 3:04 pm
Posted in Classifieds - Parts
Replies: 2
by KellyJons » Sun Dec 07, 2025 1:04 pm » in Classifieds - Parts

First post

Here are six of the Model T Ford Club Of America repairing and restoring manuals. These six books cover the Model T engine, the Model T transmission, the Model T front and rear axles, the Model T electrical system, the Model T carburetor, and Model T speedometers. All of these books are in new condition.

These retail for $12 each, plus shipping,...

Last post

Sold!

Kelly

2 Replies

136 Views

Last post by KellyJons
Sun Dec 07, 2025 3:04 pm
Side Lamp Bracket for Oil Lamp (SOLD).

Last post by Gleaner « Sun Dec 07, 2025 2:33 pm
Posted in Classifieds - Parts
Replies: 1
by Pep C Strebeck » Sun Dec 07, 2025 2:14 pm » in Classifieds - Parts

First post

Bracket has been sold.

One Side Lamp Bracket for Oil Lamp, I do not know if it is reproduction or original, but I am leaning towards original. The bracket has been powder-coated black and there are number that can be seen but the powder-coating has made them impossible to read. The price is $40, shipping included (in the U.S.). Payment methods...

Last post

Email sent

1 Replies

123 Views

Last post by Gleaner
Sun Dec 07, 2025 2:33 pm
1928 Ford Model A, Abel Starter Drive, N.O.S.

Last post by Pep C Strebeck « Sun Dec 07, 2025 2:14 pm
Posted in Classifieds - Parts

by Pep C Strebeck » Sun Dec 07, 2025 2:14 pm » in Classifieds - Parts

LOOK AWAY, this is not a Model T part it is for the Model A.

One New Old Stock Starter Gear Drive for the early 1928 Ford Model A using the Abel Drive starters. This will only fit the original, unmodified Abel drive-type starters, not any of the other/later Model A starters. I have an early 1928 Model A with the Multi-Disc Clutch and the correct...

0 Replies

103 Views

Last post by Pep C Strebeck
Sun Dec 07, 2025 2:14 pm
Brass Hubcap set of 4, 1913-1916, new reproduction.

Last post by Pep C Strebeck « Sun Dec 07, 2025 2:13 pm
Posted in Classifieds - Parts
Replies: 2
by Pep C Strebeck » Wed Dec 03, 2025 7:16 pm » in Classifieds - Parts

First post

One set of 4 (new in package) Brass Hubcaps, 1913 to 1916, price is $115 shipping included (in the U.S.). Payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail through the Forum. If you have any question please do not hesitate to ask.

IMG_7269.JPG
IMG_7267.JPG

Last post

Still available, and Back To The Top.

2 Replies

284 Views

Last post by Pep C Strebeck
Sun Dec 07, 2025 2:13 pm
Exhaust Pack Nut, set of 2, new.

Last post by Pep C Strebeck « Sun Dec 07, 2025 2:13 pm
Posted in Classifieds - Parts
Replies: 1
by Pep C Strebeck » Wed Dec 03, 2025 7:16 pm » in Classifieds - Parts

First post

Set of 2 new, reproduction Exhaust Pack Nuts, price is $45 for the set, shipping included (in the U.S.). Payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail through the Forum. If you have any question please do not hesitate to ask.

IMG_7266.JPG
IMG_7265.JPG

Last post

Back To The Top.

1 Replies

219 Views

Last post by Pep C Strebeck
Sun Dec 07, 2025 2:13 pm
Model T Ford authentic accessories 1909-1927 books

Last post by KellyJons « Sun Dec 07, 2025 12:53 pm
Posted in Classifieds - Parts

by KellyJons » Sun Dec 07, 2025 12:53 pm » in Classifieds - Parts

Three books in this set, published by James Kenealy back in the 1970s and 80s, in almost new condition with nearly 1000 pages of vintage advertising for Model T Ford accessories. Hard to find copies of these books in good condition, so I think you’ll be real happy with these.

These are wonderful primary source documents that will help you in your...

0 Replies

150 Views

Last post by KellyJons
Sun Dec 07, 2025 12:53 pm
Ford Dealer and Service Field… seven issues!

Last post by KellyJons « Sun Dec 07, 2025 12:28 pm
Posted in Classifieds - Parts

by KellyJons » Sun Dec 07, 2025 12:28 pm » in Classifieds - Parts

For sale, seven issues of Ford Dealer and Service Field from 1926 and 1927.

Two copies of April 1927, then May 1927, June 1927, August 1927 and March and April of 1926. Pretty good shape, considering they are almost 100 years old.

One of the April 1927 issues has a torn cover, and the other April 1927 has a clipped page in the back where someone...

0 Replies

121 Views

Last post by KellyJons
Sun Dec 07, 2025 12:28 pm
Annual Winter Special-Rebuilt Model T Ford Ignition Coils.

Last post by Ron Patterson « Sun Dec 07, 2025 11:59 am
Posted in Classifieds - Parts
Replies: 4
by Ron Patterson » Wed Nov 26, 2025 6:08 pm » in Classifieds - Parts

First post

Rebuilt Coils For Sale 1.jpg

Have your coils rebuilt by someone who has rebuilt over 27,000 coils for satisfied customers worldwide.
Coils ordered between December 1, 2025 and January 31, 2026 will enjoy the benefit of free Priority Mail return shipping to USA addresses.
If you have questions, please send me an email via this Forum including...

Last post

Bring to the top.

4 Replies

582 Views

Last post by Ron Patterson
Sun Dec 07, 2025 11:59 am
Question about the Mounting hardware for 26-27 headlights

Last post by Reno Speedster « Sun Dec 07, 2025 11:50 am
Posted in General Discussion Forum
Replies: 4
by Reno Speedster » Sun Dec 07, 2025 2:19 am » in General Discussion Forum

First post

I am working on light mounts for my 26 speedster. I don’t have the mounting hardware. The critical part as I understand it is a washer with a convex top that matches the concave shape on the lamp itself. Can anyone post a picture of the washer, tell me how big around it is, and tell me the diameter of the bolt that goes through it?

Last post

Perfect, thanks!

4 Replies

196 Views

Last post by Reno Speedster
Sun Dec 07, 2025 11:50 am
FS - Rebuilt - /- ECCT Calibrated Ignition Coil Sets

Last post by Moxie26 « Sun Dec 07, 2025 11:40 am
Posted in Classifieds - Parts
Replies: 22
by Moxie26 » Mon Sep 08, 2025 6:26 pm » in Classifieds - Parts

First post

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

Last post

Set B. is gone to a new owner being enjoyed. Last available is Set. A. ..... I'm still answering your pm 's... Last set available this year ! .... Thanks again for your interests.

22 Replies

2900 Views

Last post by Moxie26
Sun Dec 07, 2025 11:40 am
FS NH CARBURETOR (SOLD)

Last post by Mark Chaffin « Sun Dec 07, 2025 10:25 am
Posted in Classifieds - Parts
Replies: 3
by Mark Chaffin » Fri Dec 05, 2025 3:22 pm » in Classifieds - Parts

First post

One nice and complete NH carburetor for rebuild. No gas inlet crack visible. Price WAS $50.00 NOW $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251205_095220.jpg

20251205_095206.jpg

Last post

Going to Jay.

3 Replies

383 Views

Last post by Mark Chaffin
Sun Dec 07, 2025 10:25 am
15-16 parts

Last post by G.ARMS86 « Sun Dec 07, 2025 5:37 am
Posted in Classifieds - Parts
Replies: 3
by G.ARMS86 » Sun Jun 29, 2025 2:59 pm » in Classifieds - Parts

First post

15-16 hood former in excellent condition asking 250 or best offer
15 windshield frame in ok condition asking150 or best offer located in Connecticut please call or text George 2036873827

Last post

Back to the top

3 Replies

1087 Views

Last post by G.ARMS86
Sun Dec 07, 2025 5:37 am
1923 Engine with price update

Last post by G.ARMS86 « Sun Dec 07, 2025 5:34 am
Posted in Classifieds - Parts
Replies: 4
by G.ARMS86 » Wed Jul 23, 2025 9:50 pm » in Classifieds - Parts

First post

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

Last post

Back to the top

4 Replies

1519 Views

Last post by G.ARMS86
Sun Dec 07, 2025 5:34 am
Wheels for sale

Last post by G.ARMS86 « Sun Dec 07, 2025 5:34 am
Posted in Classifieds - Parts
Replies: 17
by G.ARMS86 » Sun Aug 17, 2025 12:20 pm » in Classifieds - Parts

First post

A bunch of wheels for sale. All need hubs most are in ok shape. Asking $25 each plus shipping or local pickup. Please call or text only George 2036873827

Last post

Back to the top

17 Replies

3065 Views

Last post by G.ARMS86
Sun Dec 07, 2025 5:34 am
Mid winter Clinic 2026 McPherson Kansas

Last post by Afrazer « Sat Dec 06, 2025 11:19 pm
Posted in General Discussion Forum
Replies: 4
by Afrazer » Mon Dec 01, 2025 10:41 am » in General Discussion Forum

First post

That time of year again!

Jan 16-17 2026 will be our schedule days!!

We have a block of rooms available at a discount of $99 a night at Hampton Inn in McPherson Kansas. Cut off to get your discounted room date is Dec 26th so book fast!

Can’t wait to see old and new faces!

Aaron Frazer

Hotel information:

200 N Centennial Dr
McPherson, KS...

Last post

David may be happing sooner than you think. ;) . But I don’t wanna spoil anything till we get the official flyer out.

4 Replies

479 Views

Last post by Afrazer
Sat Dec 06, 2025 11:19 pm
120 years ago today, December 6, 1905.

Last post by Rob « Sat Dec 06, 2025 11:07 pm
Posted in Early Ford Forum - pre-T

by Rob » Sat Dec 06, 2025 11:07 pm » in Early Ford Forum - pre-T

120 years ago today the Ford Motor Company held an emergency board meeting. The reason? To compose a letter demanding treasurer and board director A. Y. Malcomson resign. He secretly put together a competing company, Aerocar, and the Detroit newspapers had just reported on the company and Malcomson’s role as President and majority owner of the new...

0 Replies

77 Views

Last post by Rob
Sat Dec 06, 2025 11:07 pm
WTM-Maxwell Steering Gear Box17-18

Last post by Layden Butler « Sat Dec 06, 2025 11:04 pm
Posted in Classifieds - Parts
Replies: 3
by WorldChamp1914 » Sat Dec 06, 2025 5:47 pm » in Classifieds - Parts

First post

It’s similar to the Sprague but doesn’t have the correct mounting bracket, I heard that someone used to replicate the bracket…..Any out there?

Last post

First picture is from 1918 Maxwell parts book.
Second picture is of Chevrolet steering gear which works well too. I do not know year or model.

3 Replies

252 Views

Last post by Layden Butler
Sat Dec 06, 2025 11:04 pm
Christmas Special bBrass parts

Last post by Eric Edwards « Sat Dec 06, 2025 10:29 pm
Posted in Classifieds - Parts

by Eric Edwards » Sat Dec 06, 2025 10:29 pm » in Classifieds - Parts

Spun brass hub covers
4 pc set. $250 shipping included. Pics on request. Eric Edwards
New Double Twist horn lHD $375 post included.
Edwards 705 828 5405

0 Replies

210 Views

Last post by Eric Edwards
Sat Dec 06, 2025 10:29 pm
WTB Horn button assembly for 22 touring

Last post by rls120 « Sat Dec 06, 2025 8:20 pm
Posted in Classifieds - Parts

by rls120 » Sat Dec 06, 2025 8:20 pm » in Classifieds - Parts

WTB looking for a friend: Horn button assembly (including mounting bracket) for a 1922 Touring Car. If you have one available, please message me price and particulars though the forum. Thanks in advance.

Bob
rls120

0 Replies

98 Views

Last post by rls120
Sat Dec 06, 2025 8:20 pm
Roof overhead

Last post by Mark Gregush « Sat Dec 06, 2025 7:42 pm
Posted in General Discussion Forum
Replies: 7
by Ralph F » Fri Dec 05, 2025 2:37 pm » in General Discussion Forum

First post

I need to find some valves for a Roof Liberty Overhead. The valve deminsion are the following
Head diameter-1.685”
Stem diameter- .308
Length- 5.839
My other question is what the valve grind? Is the grind similar to what you would grind on model t
Thanks
Fitz

Last post

If you can get ahold of an automotive engine valve catalog you could spend some time looking for something that matches. You could go with a larger diameter head and have it cut down along with longer stem.

7 Replies

538 Views

Last post by Mark Gregush
Sat Dec 06, 2025 7:42 pm
3 window kit

Last post by Melba Nolan « Sat Dec 06, 2025 7:31 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Dec 06, 2025 7:31 pm » in Classifieds - Parts

For sale: frame and glass for 3 windows on top $45 plus postage

call 314-575-7115 for pictures

0 Replies

139 Views

Last post by Melba Nolan
Sat Dec 06, 2025 7:31 pm
brass bonnet

Last post by Melba Nolan « Sat Dec 06, 2025 7:21 pm
Posted in Classifieds - Parts

by Melba Nolan » Sat Dec 06, 2025 7:21 pm » in Classifieds - Parts

For sale: Brass bonnet for E&J 656 $25 plus postage

call 314-575-7115 for pictures

0 Replies

190 Views

Last post by Melba Nolan
Sat Dec 06, 2025 7:21 pm
What Has Your Chapter Done in 2025?

Last post by AndyClary « Sat Dec 06, 2025 7:17 pm
Posted in General Discussion Forum
Replies: 109
by AndyClary » Sat Jan 04, 2025 12:46 pm » in General Discussion Forum
1

2
First post

I’m going to try a chapter thread this year. We need to remember this is a club site and chapter activities are important. By sharing what we do maybe other chapters can get some fresh ideas.

So, we meet the first Thursday of the month. Since it was January 2nd it was lightly attended. We had 18 people where we usually have in the 25-30 range....

Last post

Today the Redwood Empire Model T Club had its Christmas/year end banquet. About 40 of us showed up for lunch and fair amount of yakking. We also collected toys for Toys 4 Tots that we’ll drop off this week.

Andy
Redwood Empire Model T Club IMG_2379.jpeg
109 Replies

33084 Views

Last post by AndyClary
Sat Dec 06, 2025 7:17 pm
My car dosen't like me.

Last post by Allan « Sat Dec 06, 2025 5:34 pm
Posted in General Discussion Forum
Replies: 14
by brendan.hoban » Fri Dec 05, 2025 2:38 am » in General Discussion Forum

First post

I have a 22 Tourer, RHD, no starter model, no generator.

It's a standard T that I have restored with commutator, trembler coils and magneto and has always worked well.

Lately, it has begun to hate me by backfiring on starting, it tries to rip my arm off.

I'm over 80 and a bit slow to comprehend why it used to be good but it now isn't.

I...

Last post

The original question was what has changed?
What made the car start kicking back? Nothing changed on the car. Enthusiastic, energetic cranking becomes harder with age.
That is what changes.
Setting the correct timing negates the problem. Changing the length of the timer connecting link will do that.
Alan from down under.

14 Replies

602 Views

Last post by Allan
Sat Dec 06, 2025 5:34 pm
Whippet Grill Shell

Last post by daveclause « Sat Dec 06, 2025 5:32 pm
Posted in Classifieds - Parts

by daveclause » Sat Dec 06, 2025 5:32 pm » in Classifieds - Parts

Grill Shell $300
Can contact me at daveclause@sbcglobal.net or thru this site.
I am in So. Cal.
Local pick up is best but there are other alternatives.

Thanks, Dave

0 Replies

230 Views

Last post by daveclause
Sat Dec 06, 2025 5:32 pm
Model t hogshead

Last post by big2bird « Sat Dec 06, 2025 2:06 pm
Posted in General Discussion Forum
Replies: 4
by hitorque » Sat Nov 29, 2025 8:16 am » in General Discussion Forum

First post

Would like to give a friend named Bill a big thank you for making a big effort to find a right hand drive hogs head with a starter access in Australia and having it shipped here to fit our 1913 Canadian t which did not have a starter mount.

Thanks bill

Last post

For those with a late 1924-25, in Oct 1924 a diffuser was cast into the hogshead to help direct oil back down into the bands. I wonder how many know this? It is in the service bulletins.

Since I have one on my car, I know.

4 Replies

561 Views

Last post by big2bird
Sat Dec 06, 2025 2:06 pm
WTB - 1926/27 Roadster

Last post by cijames5380 « Sat Dec 06, 2025 2:05 pm
Posted in Classifieds - Parts
Replies: 3
by cijames5380 » Sat Dec 06, 2025 12:02 pm » in Classifieds - Parts

First post

Hi, I'm in Chicago and looking for a nice 1926/26 Roadster, preferably black.

Also, looking for a 1926/27 turtle deck with trunk lid.

Thank you!

Last post

Thank you all - found one thanks to Mark!

3 Replies

224 Views

Last post by cijames5380
Sat Dec 06, 2025 2:05 pm
FS FORD T WRENCH 5-Z2038

Last post by Mark Chaffin « Sat Dec 06, 2025 12:47 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Dec 04, 2025 7:27 pm » in Classifieds - Parts

First post

Ford T wrench 5-Z2038. Model A & B Connecting Rod Nut tool (1928-1934) 21/32 nut. Price WAS $40.00 NOW $30.00 plus $8.50 shipping. Mark Chaffin (951) 805-0928

20251204_155954.jpg

20251204_160006.jpg

Last post

Reduced price.

1 Replies

353 Views

Last post by Mark Chaffin
Sat Dec 06, 2025 12:47 pm
Driving plate rivets dimensions?

Last post by speedytinc « Sat Dec 06, 2025 12:01 pm
Posted in General Discussion Forum
Replies: 5
by Dave1 » Mon Dec 01, 2025 11:22 pm » in General Discussion Forum

First post

What are size of the replacement driving plate rivets for a 26?
I have some on hand that “ I believe “ are the right size?
Truth be told I ordered some a couple of years back,
Used what I needed ,….. then lost the packaging !

Last post

I have seen these drive plates with 3 1 welds between the shaft flange & plate.
I like the added rigidity. Those few cracks become irrelevant.
Used drive plates are still plentiful enough @ swap meets for $10.

5 Replies

313 Views

Last post by speedytinc
Sat Dec 06, 2025 12:01 pm
FS ENGINE BLOCK OFF PLATE SET (SOLD)

Last post by Mark Chaffin « Sat Dec 06, 2025 11:06 am
Posted in Classifieds - Parts
Replies: 4
by Mark Chaffin » Fri Dec 05, 2025 3:24 pm » in Classifieds - Parts

First post

Original engine block off plate set. Three pieces. I have two sets available. Price for the set is $20.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251205_102904.jpg

Last post

Second set going to Frank. Please send me a text or message with your want and shipping info please. Thank you

4 Replies

374 Views

Last post by Mark Chaffin
Sat Dec 06, 2025 11:06 am
FS EARLY PAN (SOLD)

Last post by Mark Chaffin « Sat Dec 06, 2025 11:03 am
Posted in Classifieds - Parts
Replies: 4
by Mark Chaffin » Fri Dec 05, 2025 3:16 pm » in Classifieds - Parts

First post

One early pan (Late 1912-Early 1913). Three rivits will need to be replaced in the snout as bolts are present. The rest of the pan looks to be in very good condition. Price is $75.00. Pick up at the garage is preferred as shipping would likely be very expensive. Mark Chaffin (951) 805-0928

20251205_110352.jpg

20251205_110409.jpg...

Last post

Pan going to Michael. I can deliver to the Bakersfield Swap Meet.

4 Replies

377 Views

Last post by Mark Chaffin
Sat Dec 06, 2025 11:03 am
FS STEERING WHEEL SPIDERS (SOLD)

Last post by Mark Chaffin « Sat Dec 06, 2025 10:59 am
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Fri Dec 05, 2025 3:18 pm » in Classifieds - Parts

First post

An assortment of steering wheel spiders. Two cast early and three later styles. Price for all five is $25.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20251205_114238.jpg

Last post

Thank you Dean!

1 Replies

153 Views

Last post by Mark Chaffin
Sat Dec 06, 2025 10:59 am
WTB 30 x 3 1/2 Firestone Non-Skid All White Tire

Last post by BigAl « Sat Dec 06, 2025 10:41 am
Posted in Classifieds - Parts
Replies: 1
by BigAl » Fri Dec 05, 2025 12:12 pm » in Classifieds - Parts

First post

HELP! Would like to buy one NEW still in the wrapper 30 x 3 1/2 Firestone Non-Skid All White Tire. Being as my kids call me Technologically Deficient I hit the wrong key and mistakenly purchased a new still in the wrapper 30 x 3 1/2 Firestone Smooth All White tire. I will consider trading my all white smooth tire for a Non-Skid all white tire or...

Last post

I need someone’s HELP

1 Replies

147 Views

Last post by BigAl
Sat Dec 06, 2025 10:41 am
26-27 stanchion bolts

Last post by DanTreace « Sat Dec 06, 2025 10:39 am
Posted in General Discussion Forum
Replies: 9
by Brent Mize » Fri Dec 05, 2025 4:51 pm » in General Discussion Forum

First post

I’m trying to figure out what size carriage bolts Ford used on the 26-27 touring stanchions.
I think they’re 5/16” but not sure of the length?
Additionally was the one a slot headed screw?
Did all cars ship with the hook for the side curtains?
My cars been apart 10 years and I’m doing good to remember 10 minutes ago, even though I was methodical...

Last post

Don't remember the slotted screw, but could be.

As for the curtain hooks, Lang's sells new ones, and they have square holes.

The Parts Listing by Bruce Mc's CD encyl. lists 2 part numbers, T-7831 for 23-25 Curtain Hook on windshield bracket, and T-7832 Curtain hook on body, 15-27. But no pics of same.

On my original '23 touring the windshield...

9 Replies

327 Views

Last post by DanTreace
Sat Dec 06, 2025 10:39 am
FS Original antique coil tester

Last post by YellowTRacer « Sat Dec 06, 2025 3:46 am
Posted in Classifieds - Parts

by YellowTRacer » Sat Dec 06, 2025 3:46 am » in Classifieds - Parts

Original coil tester good condition $150.00

Ed aka #4

0 Replies

303 Views

Last post by YellowTRacer
Sat Dec 06, 2025 3:46 am
Rear crossmember question

Last post by AndreFordT « Sat Dec 06, 2025 12:20 am
Posted in General Discussion Forum
Replies: 9
by frontyboy » Thu Dec 04, 2025 11:42 pm » in General Discussion Forum

First post

I remember there was a guy making a lower crown rear crossmembers to lower a T. He used to vend at the old Bakersfield right behind me. He also had new polished aluminum disc wheels.I can not seem to find any information for him.

He made a replacement rear cross members that allowed you to lower the frame. I think it was a copy of the European...

Last post

It was indeed not a stock wide front spring.

Here is what it became after rebuild.
The front spring was replaced by a spring assembly with original spring leafs.
On the photos you can count 6 leafs but one small leaf is hidden by the support on the top and one short leaf at the bottom is added to fill up the support.
Note also the way the...

9 Replies

321 Views

Last post by AndreFordT
Sat Dec 06, 2025 12:20 am
A 1915 in the LA area?

Last post by Steve Hughes « Fri Dec 05, 2025 11:46 pm
Posted in General Discussion Forum
Replies: 12
by HarryBulkeley » Wed Dec 03, 2025 12:41 pm » in General Discussion Forum

First post

Here is a strange request. I am trying to get somebody to make a bra for the front of my 1915 Coupelet. He has made one for a 1917 and still has the pattern but needs a 1915 to see what changes it needs to make it fit. Is there anybody near Hesperia, CA that might be willing to take their 1915 to the shop for him to measure? I would be very...

Last post

Model Ts don’t need bras. Just a leather strap for the crank. That would be a jock strap. 😏

12 Replies

673 Views

Last post by Steve Hughes
Fri Dec 05, 2025 11:46 pm
This was trucking-Old Photos

Last post by Herb Iffrig « Fri Dec 05, 2025 11:30 pm
Posted in OT - Off topic
Replies: 1486
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

11

12

13

14

15
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

chain drive truck.png

I don't know if this was posted before.
1486 Replies

1858390 Views

Last post by Herb Iffrig
Fri Dec 05, 2025 11:30 pm
Holley Carb

Last post by Melba Nolan « Fri Dec 05, 2025 11:13 pm
Posted in Classifieds - Parts

by Melba Nolan » Fri Dec 05, 2025 11:13 pm » in Classifieds - Parts

For sale: Brass Holley carb needs rebuilt and missing float $50 plus postage
call 314-575-7115 for pictures

0 Replies

174 Views

Last post by Melba Nolan
Fri Dec 05, 2025 11:13 pm

Search found 217 matches

Go to advanced search