MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 162 matches

Topics

Replies

Views

Last post

New guy, new camshaft?

Last post by jsaylor « Thu Mar 05, 2026 4:34 am
Posted in General Discussion Forum
Replies: 14
by Wayne Jacobson » Wed Mar 04, 2026 11:19 am » in General Discussion Forum

First post

New guy here. I have a 1921 roadster I am currently putting new valves and cutting new seats in with adjustable lifters and all the hardware associated with the job. The original camshaft lobes have a lift from .225 at the lowest to .236 at the highest..230 average. Doing the job with the engine still in the car. I would go with a new .250 Stipe...

Last post

I have been running the Chaffin .270 in both my cars and am quite pleased with the all around performance.

14 Replies

317 Views

Last post by jsaylor
Thu Mar 05, 2026 4:34 am
Model T Ford Ignition Coil Rebuilding

Last post by Allan « Thu Mar 05, 2026 1:46 am
Posted in General Discussion Forum
Replies: 15
by Ron Patterson » Fri Feb 27, 2026 4:47 pm » in General Discussion Forum

First post

I have received several telephone calls indicating coil rebulders have no coil points in stock.
I do have coil points in stock and can rebuild your coils.
Ron Patterson

Last post

Michael, thankfully neither of these gentlemen is a warmonger or a self-centrered megalomaniac, so we should not worry too much.
Allan from down under.

15 Replies

1109 Views

Last post by Allan
Thu Mar 05, 2026 1:46 am
1913 touring wheel and rim color

Last post by Wayne Sheldon « Thu Mar 05, 2026 1:39 am
Posted in General Discussion Forum
Replies: 16
by MMorse » Sat Feb 28, 2026 3:42 pm » in General Discussion Forum

First post

I'm rebuilding the wheels on my 1913 touring due to loose spokes and felloes, as well as large cracks, etc. This caused me to wonder about the color of the wheels and the rims. Are the wheels the same as body color? Were the rims cadmium plated or galv, or were they also originally wheel or body color? I don't find anything about this in Bruce's...

Last post

So would those cars with green bodies had blue wheels????

It was nearly fifty years ago. Memory gets more and more tricky. However, my impression is that what was left of the wheel's paint (exposed to the elements for fifty years then), appeared to have been green.

16 Replies

605 Views

Last post by Wayne Sheldon
Thu Mar 05, 2026 1:39 am
Another generator question - A new one on me!

Last post by Marshall V. Daut « Thu Mar 05, 2026 1:27 am
Posted in General Discussion Forum
Replies: 28
by Marshall V. Daut » Mon Jan 12, 2026 4:28 pm » in General Discussion Forum

First post

After finally getting the engine to run in a friend's newly-purchased '26 T, it was noted that the ammeter did not register a charge even when the engine was revved up. The ammeter was wired backwards (of course!), showing a charge when the lights were tested. Once the ammeter wires were corrected, turning on the headlights gave a discharge on the...

Last post

Right. :)
M.

28 Replies

1649 Views

Last post by Marshall V. Daut
Thu Mar 05, 2026 1:27 am
Roof overhead update

Last post by Kevin Pharis « Thu Mar 05, 2026 12:48 am
Posted in General Discussion Forum
Replies: 8
by Ralph F » Sun Mar 01, 2026 5:38 pm » in General Discussion Forum

First post

IMG_8587.jpeg I just got the head back the machine shop this week. The head got 8 new valves, 2 new valve guides and 6 bronze inserts. There is a serial number on the front of the head and it is 1077 X. There is freeze plug on the top of the head that has some number but are pretty hard to read
Fitz

Last post

The stock T valve springs are working fine in my Akron-Hed overhead. Chebby valves and keepers, and 8N tractor spring retainers are a perfect fit. I went looking for off the shelf valve springs last year for a Fronty, and found that all the light pressure options had been discontinued… :roll:

8 Replies

465 Views

Last post by Kevin Pharis
Thu Mar 05, 2026 12:48 am
Wound vac system info looking

Last post by Dan Hatch « Wed Mar 04, 2026 11:36 pm
Posted in OT - Off topic

by Dan Hatch » Wed Mar 04, 2026 11:36 pm » in OT - Off topic

I know I am way off topic but there is a lot of knowledge on here,
Anyone know anything about wound vac systems or had experience with them?
Wife is getting one tomorrow and I am at a lose about it. Thanks Dan

0 Replies

34 Views

Last post by Dan Hatch
Wed Mar 04, 2026 11:36 pm
Removing Battle Locking Steering wheel, help needed

Last post by Allan « Wed Mar 04, 2026 11:15 pm
Posted in General Discussion Forum
Replies: 22
by Jack Putnam, in Ohio » Mon Mar 02, 2026 8:59 pm » in General Discussion Forum

First post

I'm looking for the secret to remove the steering wheel lock from the column. It was made by the BATTLE LOCK COMPANY and of course the key is long gone. I cannot see any pins that could be keeping the lock in place. Some paint does remain that could be hiding a pin. If anyone has any knowledge on how to separate mechanism from the column please...

Last post

I'd say the wheel is unlocked if you can still drive/steer the car. In the locked position you are likely not able to turn the steering wheel. It is more likely than not that the pins were driven in from the top, meaning they will have to be driven out from underneath if the quadrant will allow access. This presumes that tapered pins were used and...

22 Replies

597 Views

Last post by Allan
Wed Mar 04, 2026 11:15 pm
FOR SALE 1914 Ambulance body project needs completion

Last post by Burlingtontguy « Wed Mar 04, 2026 11:13 pm
Posted in Classifieds - Parts
Replies: 2
by Burlingtontguy » Mon Feb 16, 2026 10:46 pm » in Classifieds - Parts

First post

I have a great start on a 1914 WW1 Ambulance Body and Chassis, 85 % finished but all materials are there to finish this neat
piece of U S History. Located in Ct 06013 25 miles from Hartford. I can Deliver within a 100 mile radius for fuel. Asking $4,500 Email for pictures and send Contact# to discuss the project. You will not be disappointed with...

Last post

to the top

2 Replies

603 Views

Last post by Burlingtontguy
Wed Mar 04, 2026 11:13 pm
FOR SALE 3- 26-7 coil boxes,engine blocks,rear axle housings

Last post by Burlingtontguy « Wed Mar 04, 2026 11:12 pm
Posted in Classifieds - Parts
Replies: 2
by Burlingtontguy » Mon Feb 16, 2026 11:00 pm » in Classifieds - Parts

First post

I have 3 - nice 26-7 coilboxes with covers, $115 plus shipping, 26-7 engine blocks $350 plus shipping, 26-7 rear axle housings
$100 plus shipping, 2-3 High radiators $150 each plus shipping. 26-7 frames excellant condition $350 each. All items can be picked up in Ct 06013. Email needs with contact# I will call you back to discuss all items and...

Last post

to the top

2 Replies

513 Views

Last post by Burlingtontguy
Wed Mar 04, 2026 11:12 pm
Minnesota Swapmeet April 18 2026

Last post by BobP « Wed Mar 04, 2026 11:02 pm
Posted in Classifieds - Vehicles
Replies: 3
by BobP » Sun Feb 08, 2026 5:28 pm » in Classifieds - Vehicles

First post

We are having our 9th annual swap meet April 18th 700 A.M.

Last post

It is located at 7525 County 12 Blvd. Kenyon, Mn 55946.

3 Replies

933 Views

Last post by BobP
Wed Mar 04, 2026 11:02 pm
Help to ID brass parts.

Last post by varmint « Wed Mar 04, 2026 10:32 pm
Posted in General Discussion Forum
Replies: 1
by Pep C Strebeck » Wed Mar 04, 2026 7:56 pm » in General Discussion Forum

First post

This was in the bottom of a random-box-of-awesomeness from the recent Cipriano Estate auction, and I am looking for some help to ID them. There are 2 pieces/brackets exactly the same, cast brass, with the 2 steel studs and castellated nuts. Any help or ideas are always appreciated.

IMG_7347.JPG
IMG_7348.JPG

Last post

Looks too stout for a license plate bracket,
and too fragile as an engine lift leveler.

1 Replies

108 Views

Last post by varmint
Wed Mar 04, 2026 10:32 pm
'27 frame, motor, loose parts

Last post by Oldrusty26 « Wed Mar 04, 2026 9:21 pm
Posted in Classifieds - Parts
Replies: 27
by Martinbuilt » Thu Dec 04, 2025 4:52 pm » in Classifieds - Parts

First post

I'm going to be shifting some things around in the shop, so if i can re-home this soon...
Otherwise, everything gets buried until i'm bored.
No title. I wanted to build a pig 'n ford type racer.
Super nice frame. Clean, painted, lovely. (I drilled out the rivets, and removed the running board supports, but they are here.)
Numbers are present.
'27...

Last post

Chris , where are you located again ? I may be able to come down this weekend

27 Replies

3032 Views

Last post by Oldrusty26
Wed Mar 04, 2026 9:21 pm
Model F body plans

Last post by Hap_Tucker « Wed Mar 04, 2026 7:53 pm
Posted in Early Ford Forum - pre-T
Replies: 4
by KimDobbins » Tue Feb 17, 2026 6:29 pm » in Early Ford Forum - pre-T

First post

I have some body plans and templates for model F Ford, free to a good home, just pay postage. Kdmks At att.net.

Last post

Kim,

The Model F body plans arrived safely today. Thank you so much for sending them my way. Please send me a note (e-mail and/or through the forum) with how much to send and where to send it. I think I could even send it PayPal -- but it has been a while since I used that.

Again thank you so much for helping us save that information....

4 Replies

383 Views

Last post by Hap_Tucker
Wed Mar 04, 2026 7:53 pm
Tool Time

Last post by Jerry VanOoteghem « Wed Mar 04, 2026 6:42 pm
Posted in OT - Off topic
Replies: 156
by Bryant » Mon Aug 29, 2022 6:35 pm » in OT - Off topic
1

2
First post

Picked up this gem this weekend. Appears well built. Anyone play with one like it? 6B5DE632-49E4-490B-98CC-85AD0EAB075A.jpeg I figured it would be useful with the T project amongst other things. If you have a cool Tool post it. Might be fun to see
Bryant

Last post

Bravo!!

Wyoming approved!

It doesn't get much better than that! :)
156 Replies

996886 Views

Last post by Jerry VanOoteghem
Wed Mar 04, 2026 6:42 pm
FS Original Model T 1926/27 Walker Stamped Ratchet Style Jack

Last post by MAG « Wed Mar 04, 2026 5:12 pm
Posted in Classifieds - Parts
Replies: 2
by MAG » Thu Feb 12, 2026 10:10 am » in Classifieds - Parts

First post

Model T 1926/27 Walker stamped ratchet style jack T2343. This jack works as it should. These are not listed often and are hard to find. $125 and $23 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

Last post

SOLD to Ed awaiting payment

2 Replies

491 Views

Last post by MAG
Wed Mar 04, 2026 5:12 pm
WTB: Fork Mounted Electric Headlights

Last post by BRENT in 10-uh-C « Wed Mar 04, 2026 5:02 pm
Posted in Classifieds - Parts
Replies: 7
by BRENT in 10-uh-C » Sun Jan 18, 2026 8:45 am » in Classifieds - Parts

First post

Looking to purchase a pair of the Fork-mounted Electric Headlights. Restored or Unrestored, any condition considered as long as the lamps are complete and restorable.

Below are examples of what I am looking for;

Thanks!!

Last post

Hi Brent,
I have a set of victor light just like the ones in the picture. They are in great shape. The light buckets are all painted in perfect shape, included are very nice forks, the lens are incorrect, the rims are nickel, a couple small imperfections. All in all, great shape. Call or email me. Ray.

Ray, I sent an email Tuesday morning and...

7 Replies

542 Views

Last post by BRENT in 10-uh-C
Wed Mar 04, 2026 5:02 pm
FS running board luggage racks

Last post by billd « Wed Mar 04, 2026 4:46 pm
Posted in Classifieds - Parts

by billd » Wed Mar 04, 2026 4:46 pm » in Classifieds - Parts

For sale is three running board luggage racks. One short one and two tall ones. All three work as they should. The brackets on the two taller ones are just a little bit different. $60 for the short one, $80 each for the other two, plus shipping to the lower 48 for all three.The running board is NOT included. Best way to reach me is either a text...

0 Replies

97 Views

Last post by billd
Wed Mar 04, 2026 4:46 pm
SOLD Nickel Radiator Cap – NEW

Last post by MAG « Wed Mar 04, 2026 4:45 pm
Posted in Classifieds - Parts
Replies: 3
by MAG » Thu Feb 12, 2026 10:12 am » in Classifieds - Parts

First post

A brand-new Nickel radiator cap. These are not in stock at the venders. $25 and $10 shipping. Email me at markpaulagember AT aol DOT com

Last post

Sold to Mark. I will get it out in the mail to you.

3 Replies

464 Views

Last post by MAG
Wed Mar 04, 2026 4:45 pm
Havin a laugh in the old ford.

Last post by Jerry VanOoteghem « Wed Mar 04, 2026 4:15 pm
Posted in General Discussion Forum
Replies: 6
by Dollisdad » Tue Mar 03, 2026 5:38 pm » in General Discussion Forum

First post

IMG_5249.jpeg IMG_5229.jpeg IMG_5259.jpeg IMG_5230.jpeg

Last post

Smith Form-a-Truck kit with 5th wheel trailer

One of the very first Fruehauf trailers.

6 Replies

395 Views

Last post by Jerry VanOoteghem
Wed Mar 04, 2026 4:15 pm
Exhaust Manifold Repair

Last post by Kenny Edmondson « Wed Mar 04, 2026 4:08 pm
Posted in General Discussion Forum
Replies: 45
by SurveyKing » Sat Feb 14, 2026 10:27 pm » in General Discussion Forum

First post

Can someone give me a recommendation for a person who can repair a small crack in an exhaust manifold port?
This is a 1909 Part T511. Thanks

See pics. Exhaust Manifold T511 - A.jpg Exhaust Manifold T511 - B.jpg Exhaust Manifold T511 - C.jpg

Last post

Vee it out on the inside and braze it.

45 Replies

2438 Views

Last post by Kenny Edmondson
Wed Mar 04, 2026 4:08 pm
Power reduction at the starter

Last post by davet753 « Wed Mar 04, 2026 3:16 pm
Posted in General Discussion Forum
Replies: 29
by Anton Seelmann » Sun Feb 15, 2026 2:53 pm » in General Discussion Forum

First post

Hello everyone!

I had a starter retrofitted to my 2017 Touring by Duncan and Fraser/Bob Chantrell in Adelaide (12-volt system). It's a bit too stiff. Can I make the starter a little softer by reducing the voltage? If so, how can I reduce the voltage – just for the starter?

Thanks in advance for your helpful advice and

Best regards from...

Last post

Inexpensive 6 to 12 volt converters are available in several current capacities. They provide 12 volt, clean power that can operate modern electronic devices as well as LED lighting, turn signals, etc.

Absolutely right! You can get a 6 to 12 volt converter for less than $20 that will supply 3 or 4 amps; more than enough to charge a phone or run...

29 Replies

1135 Views

Last post by davet753
Wed Mar 04, 2026 3:16 pm
WTB: Instruction sheet or advertisement

Last post by TRDxB2 « Wed Mar 04, 2026 2:46 pm
Posted in Classifieds - Parts
Replies: 2
by jaybee47 » Tue Mar 03, 2026 6:16 pm » in Classifieds - Parts

First post

Out of curiosity, I bought this thing from Lang's. I would like to buy a copy of an instruction sheet, advertisement or other helpful information as to how it is installed and its operation. Many thanks. IMG_0088.jpeg

Last post

I did an image search. The eBay one looks closest, the other two have a relief outlet on the top

2 Replies

232 Views

Last post by TRDxB2
Wed Mar 04, 2026 2:46 pm
FS 6 Fluted Oil Cap – Steel no Script

Last post by MAG « Wed Mar 04, 2026 2:45 pm
Posted in Classifieds - Parts
Replies: 3
by MAG » Mon Jul 28, 2025 6:40 pm » in Classifieds - Parts

First post

6 fluted original steel oil cap. Plain top. (1915-16) $25 shipped to your door. Has intact screen. Email me at markpaulagember AT aol DOT com

Last post

to the top

3 Replies

1342 Views

Last post by MAG
Wed Mar 04, 2026 2:45 pm
FS 1926 Michigan License Plate Set – Restored/Repainted

Last post by MAG « Wed Mar 04, 2026 2:40 pm
Posted in Classifieds - Parts
Replies: 1
by MAG » Thu Feb 12, 2026 10:15 am » in Classifieds - Parts

First post

How about a nice set of 1926 Michigan license plates for your car. These can be registered and run as original plates. These were redone by Duane Wells many years ago. NOW $100 and $15 shipping. Email me at markpaulagember AT aol dot com

Last post

Price updated to $100 in add

1 Replies

419 Views

Last post by MAG
Wed Mar 04, 2026 2:40 pm
Frame stamp

Last post by Rayboy « Wed Mar 04, 2026 2:21 pm
Posted in General Discussion Forum
Replies: 22
by Rayboy » Sat Feb 28, 2026 6:37 pm » in General Discussion Forum

First post

I just purchased a chassis from a 27 T. It has an odd logo stamped into the frame. Wonder if anyone can tell me what it is. It looks like a company logo. I’ve enclosed a picture of it. Thanks. Ray

Last post

IMG_2113.jpeg

22 Replies

797 Views

Last post by Rayboy
Wed Mar 04, 2026 2:21 pm
TT C-Cab Seat Arrangement

Last post by abcarswell « Wed Mar 04, 2026 10:46 am
Posted in General Discussion Forum
Replies: 8
by abcarswell » Mon Mar 02, 2026 3:31 pm » in General Discussion Forum

First post

Hello fellow TTer’s again,
I’m now looking at moving forward with a seat replacement. Several years ago, I had a local upholster redo my one piece seat which again was not original to the truck. It works fine but is unwieldy to access the gas tank so went ahead and purchased Snyder’s repo seat spring set. In researching the old forum posts, it...

Last post

Adam and George - My truck did have a seat back in it when I bought it although it was not original. It was mounted on the original taps in the rear cab wall. At 6'4 , it was removed pretty quickly to allow me to better fit in the cab and I've been running it without for six years now. I'm trying to take the truck back to original as much as...

8 Replies

335 Views

Last post by abcarswell
Wed Mar 04, 2026 10:46 am
Misc. Parts For Sale

Last post by Jakekj « Wed Mar 04, 2026 10:17 am
Posted in Classifieds - Parts
Replies: 1
by Wingnut » Wed Mar 04, 2026 9:39 am » in Classifieds - Parts

First post

Hello all, up for grabs is a gently used Texas T water pump in great serviceable condition $150 plus shipping. Also a complete set of Model A wire wheel lug nuts, as you know they will fit Model T too, $30 plus shipping. I can be reached @ threethree02four12six4one, call or text, always good to hear from another T nut. Thanks Wingnut

Last post

I'm interested in the lug nuts.

1 Replies

239 Views

Last post by Jakekj
Wed Mar 04, 2026 10:17 am
St. Louis Swap Meet

Last post by South Park Zephyr « Wed Mar 04, 2026 10:03 am
Posted in Classifieds - Parts

by South Park Zephyr » Wed Mar 04, 2026 10:03 am » in Classifieds - Parts

Here in St. Louis, The Model T Club of Greater St. Louis, is having our annual swap meet May 3rd.
I don’t know how many years this has gone on for us, but I attended many times before joining the club, going back well over 25 years ago.
We have been at this location for a few years now.
Last year highway construction impacted our turnout, but as...

0 Replies

89 Views

Last post by South Park Zephyr
Wed Mar 04, 2026 10:03 am
Antique Water Pump

Last post by Wingnut « Wed Mar 04, 2026 9:47 am
Posted in Classifieds - Parts

by Wingnut » Wed Mar 04, 2026 9:47 am » in Classifieds - Parts

One more item, a period Water Pump looks to be serviceable $50 plus shipping, again contact via text or call, 3threezer02fourone2six4one. Thanks Wingnut

0 Replies

136 Views

Last post by Wingnut
Wed Mar 04, 2026 9:47 am
15-20 Center Door Bale Handles FS

Last post by Tbird « Wed Mar 04, 2026 9:23 am
Posted in Classifieds - Parts

by Tbird » Wed Mar 04, 2026 9:23 am » in Classifieds - Parts

A pair of Bale handles for the center door T's
$150 plus shipping.
Thanks!

IMG_4715.jpg
IMG_4714.jpg

mikebird@lifeattheridge.net

0 Replies

103 Views

Last post by Tbird
Wed Mar 04, 2026 9:23 am
FS early top bow sockets

Last post by billd « Wed Mar 04, 2026 8:02 am
Posted in Classifieds - Parts
Replies: 2
by billd » Sat Feb 21, 2026 12:39 pm » in Classifieds - Parts

First post

For sale are Top bow socket arms for a 1911-12 roadster and torpedo. They are Brass and the threads are in excellent condition. $100 plus shipping to lower 48. Best way to reach me is through text message, my number is 419-217-8884.

Last post

Top sockets are sold. Thanks Tom and Joe!

2 Replies

586 Views

Last post by billd
Wed Mar 04, 2026 8:02 am
Rebuilding 1912 Heinze Coils

Last post by Darren J Wallace « Wed Mar 04, 2026 7:34 am
Posted in General Discussion Forum
Replies: 34
by Darren J Wallace » Sun Nov 30, 2025 2:18 pm » in General Discussion Forum

First post

While my hand heals from surgery, I’m slowly getting back into doing things. I started out this weekend by doing something small and light, and for myself. I’ve had an unrestored spare set of late 1912 Heinze ignition coils for my 1913 Canadian Ford. I decided to rebuild them. Since my car is a very unrestored cosmetically, but very well...

Last post

THAT is extremely valuable information! I wouldn’t have thought of that so thank you very much for adding this! It would certainly make it much easier to do without a doubt!

34 Replies

2658 Views

Last post by Darren J Wallace
Wed Mar 04, 2026 7:34 am
RAJO HEAD FOR SALE

Last post by Dan McEachern « Wed Mar 04, 2026 12:19 am
Posted in Classifieds - Parts
Replies: 3
by OGTim13 » Sun Mar 01, 2026 1:51 pm » in Classifieds - Parts

First post

RAJO OHV for sale. asking $4000 contact Tim PM me.
IMG_3041.jpeg IMG_3055.jpeg IMG_3056.jpeg IMG_3061.jpeg

Last post

FWIW- it's essentially a B Rajo without the cross over port- not a big deal since most folks don't use it anyway unless they happen to have an original Rajo Intake manifold with the hot air provision. The cross over port originated behind the #2 and #3 exhaust valves and exited on the intake side of the head between the two intake ports.

3 Replies

764 Views

Last post by Dan McEachern
Wed Mar 04, 2026 12:19 am
For Sale: Accessory Engine Support Brace

Last post by Don D « Tue Mar 03, 2026 10:49 pm
Posted in Classifieds - Parts
Replies: 1
by Ed Fuller » Sat Feb 28, 2026 9:17 pm » in Classifieds - Parts

First post

Very nice period accessory engine oil pan brace. Also known as a “belly band”. Works great to take some load off of your pan ears. Has very nice hooks that attach to the frame rails on both sides.

$75 plus shipping in the U.S.

IMG_9167.jpeg

IMG_9168.jpeg

IMG_9170.jpeg

IMG_9171.jpeg

Last post

Ed,

I'll take it. Let me know the cost to ship to zip 37363, Thanks Dom

1 Replies

385 Views

Last post by Don D
Tue Mar 03, 2026 10:49 pm
Wheel color

Last post by DanTreace « Tue Mar 03, 2026 9:53 pm
Posted in General Discussion Forum
Replies: 10
by Art Ebeling » Mon Mar 02, 2026 11:48 am » in General Discussion Forum

First post

On a 13 runabout with blue wheels what color is the rear brake drum? Where they painted blue with the wheels or black like the chassis? Art

Last post

Photos from 1914 of the painting process for wheels and rear axles, Ford Methods and The Ford Shops .

Wheels were spun painted, at 750 rpms first coat, then lower rpms for second coat. Stacked and dried.
4000 wheels a day by 27 workers.

Rear axles were assembled and dip painted.

IMG_1104.jpeg

IMG_1105.jpeg

IMG_1106.jpeg

10 Replies

336 Views

Last post by DanTreace
Tue Mar 03, 2026 9:53 pm
WTB: 2 Pair of Accessory taillight brackets

Last post by GatorsModelT « Tue Mar 03, 2026 9:25 pm
Posted in Classifieds - Parts

by GatorsModelT » Tue Mar 03, 2026 9:25 pm » in Classifieds - Parts

I want to buy two pair of accessory taillight brackets that attach to the top saddle arms of any Touring car or roadster
and allows you to use the electric tail lamps. Please contact me here.
Eric Gould
Monroeville, AL

0 Replies

132 Views

Last post by GatorsModelT
Tue Mar 03, 2026 9:25 pm
FS 1912 Engine Block, Pan, Hogshead, Trans-Price Lowered

Last post by old_charley « Tue Mar 03, 2026 8:09 pm
Posted in Classifieds - Parts
Replies: 5
by old_charley » Thu Jan 22, 2026 10:31 pm » in Classifieds - Parts

First post

Everything in the first picture. Block with heavy valve doors, and timing gear cover; fan w/brass hub; seven rivet teacup pan; hogshead with pedals and Ford script inspection cover; complete transmission assembly. The block, going by the serial #97901 was assembled in March of '12. The casting date is not really legible. There are no cracks in the...

Last post

Back to the top

5 Replies

1251 Views

Last post by old_charley
Tue Mar 03, 2026 8:09 pm
FS: Stromberg LF-Price reduction

Last post by old_charley « Tue Mar 03, 2026 8:03 pm
Posted in Classifieds - Parts
Replies: 2
by old_charley » Thu Jan 01, 2026 6:08 pm » in Classifieds - Parts

First post

Stromberg LF for sale. Complete carburetor. Nothing frozen up on it. No wear on the throttle shaft. Asking $200. I know the OF and RF are great carburetors. I don't know about the LF. If interested, please contact me through the forum email system. Thank you.
Bryan Ostergren
Stromberg 1.jpeg
Stromberg.jpeg
Stromberg 3.jpeg
Stromberg 4.jpeg

Last post

Back to the top

2 Replies

908 Views

Last post by old_charley
Tue Mar 03, 2026 8:03 pm
FS: Winfield Model M 201A with choke-price is flexible

Last post by old_charley « Tue Mar 03, 2026 8:02 pm
Posted in Classifieds - Parts
Replies: 2
by old_charley » Sun Jan 04, 2026 12:17 pm » in Classifieds - Parts

First post

This carburetor is complete. The barrel throttle works freely with no slop. 1 1/8 throat. Asking $400. like the subject line says, I'm flexible on the price. You can contact me through the forum email system. Thanks.
Bryan Ostergren
Winfield 1.jpeg
Winfield 2.jpeg
Winfield 3.jpeg
Winfield 4.jpeg
Winfield 5.jpeg

Last post

Back to the top

2 Replies

1076 Views

Last post by old_charley
Tue Mar 03, 2026 8:02 pm
NRS radiator comparison.

Last post by Rob « Tue Mar 03, 2026 7:47 pm
Posted in Early Ford Forum - pre-T
Replies: 7
by Robert Kiefaber » Sat Feb 21, 2026 3:36 pm » in Early Ford Forum - pre-T

First post

Here is a photo of an original NRS radiator tank on top and a new Brassworks radiator on bottom. As you can see the new radiator seam around the edge has a lip. The original has no seam and is flush with the surface. Did they manufacture radiators with the lip originally? Were they made both ways back in the day?
IMG_2488.jpeg

Last post

A few more. This is believed to be one of the first two or three Model N (three at the early 1906 auto shows, with only one running and demonstrating. This very early radiator looks similar to the Long-Turney rads pictured earlier.

Henry Ford with prototype N and driver 1906.jpeg

IMG_4288.jpeg

1ad22b94-31e7-48d3-8a77-e688eb757522.jpeg

7 Replies

543 Views

Last post by Rob
Tue Mar 03, 2026 7:47 pm
Brass anti tarnish covers! Update 2-2-26

Last post by Nikko012 « Tue Mar 03, 2026 7:27 pm
Posted in Classifieds - Parts
Replies: 7
by Karl Von Neumann » Thu Jan 22, 2026 9:56 am » in Classifieds - Parts

First post

Brass anti tarnish covers are now available for order! Full sets not yet available but are comming soon. Earlier model headlamps and cowl lamps are in the works. I am a one man band doing this so please be patient with me and my sewing machine we can only work so fast. All covers are hand made to order from anti tarnish cloth and water proof...

Last post

Just received my set, they fit great ! Thanks Karl.

7 Replies

1586 Views

Last post by Nikko012
Tue Mar 03, 2026 7:27 pm
commutator retainig nut size on NRS

Last post by JvanMaanen « Tue Mar 03, 2026 6:39 pm
Posted in Early Ford Forum - pre-T
Replies: 2
by JvanMaanen » Tue Mar 03, 2026 4:39 pm » in Early Ford Forum - pre-T

First post

The commutator roller on my SR is held on with a cotter pin. What is the size of the nut on the camshaft to secure it?. Is it a left hand thread?

thanks

Last post

Thanks Jerry, that is what I thought, so that confirms it.

Jim

2 Replies

45 Views

Last post by JvanMaanen
Tue Mar 03, 2026 6:39 pm
One century old this month

Last post by Allan « Tue Mar 03, 2026 6:06 pm
Posted in General Discussion Forum
Replies: 4
by jiminbartow » Mon Mar 02, 2026 5:51 pm » in General Discussion Forum

First post

One hundred years ago in March of 1926, My Model T coupe rolled off the assembly line. When it was 44 years old in 1970, 56 years ago I bought it for $600.00 and began restoring it when I was 16 completing it 2 years later when I was 18. I am now 72. Jim Patrick

IMG_6603.jpeg IMG_6602.jpeg IMG_1257.jpeg IMG_6606.jpeg

Last post

Well done Jim. That is a great story. Having production figures for US T models makes dating them relatively easy, unlike my experience with Henrietta, my barn find tourer buckboard.
From registration records she is also 100 years old in late Feb early March 1926. I too, am the second registered owner after the Webb family, who held her until...

4 Replies

304 Views

Last post by Allan
Tue Mar 03, 2026 6:06 pm
26-27 Coil box in nice shape FS

Last post by Ruxstel24 « Tue Mar 03, 2026 3:16 pm
Posted in Classifieds - Parts
Replies: 1
by Ruxstel24 » Tue Mar 03, 2026 3:15 pm » in Classifieds - Parts

First post

Wood is solid also…$100 including shipping to the 48 states
33zero 3nine one nine zero 62 is the best contact for me, thanks Dave

Last post

Another picture

1 Replies

152 Views

Last post by Ruxstel24
Tue Mar 03, 2026 3:16 pm
Cal-Van puller

Last post by South Park Zephyr « Tue Mar 03, 2026 3:11 pm
Posted in Classifieds - Parts
Replies: 5
by Melba Nolan » Fri Jan 02, 2026 5:01 pm » in Classifieds - Parts

First post

20251208_214755.jpg
For Sale: Cal-Van #548 puller $25 plus postage

Last post

I have one I bought from a tool truck (Snap-on/Mac/ Matco/Cornwell), 40 plus years ago. It was more than $25.
Great tool to have, as it also removes several types of windshield wiper arms, I used it last week to get a corroded arm off

5 Replies

993 Views

Last post by South Park Zephyr
Tue Mar 03, 2026 3:11 pm
Kingston 4-ball carburetor

Last post by Corey Walker « Tue Mar 03, 2026 2:51 pm
Posted in Classifieds - Parts

by Corey Walker » Tue Mar 03, 2026 2:51 pm » in Classifieds - Parts

Completely disassembled and cleaned, viton tipped needle and seat conversion, new float, choke spring, ID plate, reconditioned spray needle with nice original knob, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

122 Views

Last post by Corey Walker
Tue Mar 03, 2026 2:51 pm
1910 locking door latch strike plates

Last post by rendo « Tue Mar 03, 2026 1:39 pm
Posted in Classifieds - Parts

by rendo » Tue Mar 03, 2026 1:39 pm » in Classifieds - Parts

Is anyone familiar with someone who may have reproduced the strike plates for the 1910 locking door latch?
Thank you!

0 Replies

125 Views

Last post by rendo
Tue Mar 03, 2026 1:39 pm
WTB: 1910 T door latch strike plate

Last post by Dollisdad « Tue Mar 03, 2026 12:52 pm
Posted in Classifieds - Parts
Replies: 1
by rendo » Tue Feb 24, 2026 1:48 pm » in Classifieds - Parts

First post

WTB: 1910 T door latch strike plate.
Thank you.

Last post

Hi John, is this what your looking for? IMG_4648.jpeg

1 Replies

269 Views

Last post by Dollisdad
Tue Mar 03, 2026 12:52 pm
Re: For Sale: Accessories & More

Last post by RajoRacer « Tue Mar 03, 2026 12:30 pm
Posted in Classifieds - Parts
Replies: 4
by RajoRacer » Fri Feb 27, 2026 7:34 pm » in Classifieds - Parts

First post

Found a nice original set of early firewall brackets - I'd take $75 for the pair & split the shipping. Pikes Peak large drum brakes still available - price out repro Rocky Mtn. & see what the better deal is ! $500 + the ride now. Drop me a note through the Forum, please.

Last post

Sorry - brakes were spoken for last night.

4 Replies

495 Views

Last post by RajoRacer
Tue Mar 03, 2026 12:30 pm
WTB front fender mounting bracket 17-25

Last post by Jack Putnam, in Ohio « Tue Mar 03, 2026 11:32 am
Posted in Classifieds - Parts
Replies: 5
by Jack Putnam, in Ohio » Sun Mar 01, 2026 2:41 pm » in Classifieds - Parts

First post

I'm looking for one front fender support bracket. Prefer original unadulterated one. Picture is for reference. Contact me through the forum email. Let me know what is available. Thanks Jack. Ÿ

Last post

Fender brackets gave been located. Thanks to Steve.

5 Replies

287 Views

Last post by Jack Putnam, in Ohio
Tue Mar 03, 2026 11:32 am
Rushmore Light help

Last post by Tbird « Tue Mar 03, 2026 10:28 am
Posted in General Discussion Forum

by Tbird » Tue Mar 03, 2026 10:28 am » in General Discussion Forum

Anyone here know what the rings look like that hold in the glass in on the door of a Rushmore search light looks like. Also how is the mirror in the back of the light held in? Pictures would be very helpful. Thanks!

0 Replies

157 Views

Last post by Tbird
Tue Mar 03, 2026 10:28 am
For Sale: Complete Hassler set

Last post by RajoRacer « Tue Mar 03, 2026 10:05 am
Posted in Classifieds - Parts
Replies: 2
by RajoRacer » Mon Mar 02, 2026 6:56 pm » in Classifieds - Parts

First post

Here's a full set of Hassler shocks. Springs have been powder coated as well as a front set of spring holders & a pair of later style rear holders - I'll include the earlier rear cast holders - no charge. Rear arms have new Ford sized bushings installed. $250.00 for all the pieces - the trip will be extra !

Last post

Sale pending - thanks Bill & MTFCA !

2 Replies

298 Views

Last post by RajoRacer
Tue Mar 03, 2026 10:05 am
For Sale: SOLD! Bosch Distributor

Last post by amuffler « Tue Mar 03, 2026 9:52 am
Posted in Classifieds - Parts
Replies: 8
by Ed Fuller » Sat Nov 01, 2025 7:20 pm » in Classifieds - Parts

First post

Bosch Distributor for sale. This came with a bunch of T parts I just bought and I’ve never run a distributor on my T’s so I don’t know much about it.

The shaft turns, the cap has a couple little chunks missing but should still work. The rotor looks good. It looks like the body of the distributor has had some damage in the past and look to have...

Last post

I am interested please call or email
Joe Davis 650-279-6609

8 Replies

1687 Views

Last post by amuffler
Tue Mar 03, 2026 9:52 am
Marietta, Ohio swap meet, March 7, 2026

Last post by Oldrusty26 « Tue Mar 03, 2026 7:59 am
Posted in General Discussion Forum
Replies: 12
by Tmooreheadf » Tue Jan 06, 2026 8:40 pm » in General Discussion Forum

First post

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

Last post

See ya there !!

12 Replies

1543 Views

Last post by Oldrusty26
Tue Mar 03, 2026 7:59 am
Early T Screwdriver

Last post by love2T's « Tue Mar 03, 2026 7:45 am
Posted in General Discussion Forum
Replies: 5
by fordrelic » Mon Mar 02, 2026 9:50 am » in General Discussion Forum

First post

Is this the early T screwdriver?

Last post

Mine has the fluted areas around the large part of handle but its faint.
I believe it to be a model T screwdriver.

The square shaft also through handle.

Clay

The square shaft showing through the handle has always been considered the proof of the pudding , and yeh after over 100 years the flutes certainly can be well worn. I have two of these,...

5 Replies

449 Views

Last post by love2T's
Tue Mar 03, 2026 7:45 am
repairing the speedometer inner cable.

Last post by AndreFordT « Tue Mar 03, 2026 7:10 am
Posted in General Discussion Forum
Replies: 6
by AndreFordT » Sun Mar 01, 2026 4:13 am » in General Discussion Forum

First post

Hi all,

I am looking for a way and parts to rebuild the speedo meter inner cable.
The original cable is build up with shackles.
Can I buy somewhere a new inner cable or is there a way to rebuild the broken shackle? In the MTFCA speedometer book.

Thaks
Andre
Belgium

Last post

Thank you Russ I will contact the owner of the speedometer.

6 Replies

437 Views

Last post by AndreFordT
Tue Mar 03, 2026 7:10 am
1909 - 10 Pedal

Last post by RGould1910 « Mon Mar 02, 2026 10:40 pm
Posted in General Discussion Forum
Replies: 2
by got10carz » Sun Mar 01, 2026 3:34 pm » in General Discussion Forum

First post

Look at the cross hatch on the clutch pedal. One person thought early 9. No foundry mark that I can see. What say you?

Last post

You can see a difference in 09-10 foot pedals when you compare them alongside later ones. There is more curvature in the 09-10. Its not hard to spot.

2 Replies

440 Views

Last post by RGould1910
Mon Mar 02, 2026 10:40 pm
Front crossmember rivet question

Last post by Allan « Mon Mar 02, 2026 10:32 pm
Posted in General Discussion Forum
Replies: 14
by old_charley » Mon Feb 23, 2026 12:15 pm » in General Discussion Forum

First post

I'm preparing to replace my front crossmember. Can anyone tell me the correct lenght of the rivets to compress properly? Thanks in advance.
Bryan

Last post

Fitting hot rivets requires that the holes be large enough to take the hot rivet. It is the dumping/pounding and head forming which expands the rivet to make a tight fit in the holes.
Riveting in a front cross member using bucking bolts is not like ordinary hot riveting, like fitting the early forged running board supports. You cannot start with a...

14 Replies

728 Views

Last post by Allan
Mon Mar 02, 2026 10:32 pm
Auction Feb. 28

Last post by Model T Mark « Mon Mar 02, 2026 9:53 pm
Posted in General Discussion Forum
Replies: 11
by fordrelic » Tue Feb 24, 2026 7:49 pm » in General Discussion Forum

First post

Check out Auction @ The Super Auction
Estate of Sam Cipriano.

Tipton, MI.

Has several Brass era T parts.

Not my sale just happened on sale ad.

Last post

My dad and I went. We bought a lot of stuff some was reasonable and other stuff brought retail. We are only buying stuff for our current/future projects these days. We got the coupe body for a 10 chassis we have been collecting up over the years and the 13 roadster body. We had a great day. It was nice to catch up with some forum members. Had a...

11 Replies

1280 Views

Last post by Model T Mark
Mon Mar 02, 2026 9:53 pm
PENDING PAYMENT Carbide Generator

Last post by Algonac27 « Mon Mar 02, 2026 7:42 pm
Posted in Classifieds - Parts
Replies: 2
by Algonac27 » Sun Mar 01, 2026 7:30 pm » in Classifieds - Parts

First post

Took this off my 1913 when i bought it and do not need it anymore 750.00 obo Shipped to the lower 48
Pics should be attached!!

Last post

Hahaha I know, I was working on other paperwork at the same time

2 Replies

461 Views

Last post by Algonac27
Mon Mar 02, 2026 7:42 pm
Model T TT 5th wheel or ?

Last post by Herb Iffrig « Mon Mar 02, 2026 7:21 pm
Posted in General Discussion Forum
Replies: 16
by John kuehn » Sat Feb 28, 2026 8:54 pm » in General Discussion Forum

First post

Here’s a photo of what looks to me an early version of the so called 5th wheel. If it is was it a company made or was it available from a body maker. Learning something new about heavy TT Truck use.

Last post

I have one of those trailers in as found condition. It is a Fruehauf like the one at the Ford Museum. It is very heavy.

16 Replies

517 Views

Last post by Herb Iffrig
Mon Mar 02, 2026 7:21 pm
What have you done to your Model T in February '26

Last post by TXGOAT2 « Mon Mar 02, 2026 6:43 pm
Posted in General Discussion Forum
Replies: 24
by varmint » Fri Feb 06, 2026 8:14 pm » in General Discussion Forum

First post

Removed mosquitoes.

smoked.jpg

Last post

You can use E-10 as long as the vehicle is being used often. (Be sure it's fresh) For storage, E-0 is best.

24 Replies

2195 Views

Last post by TXGOAT2
Mon Mar 02, 2026 6:43 pm
coil box lids

Last post by Ruxstel24 « Mon Mar 02, 2026 5:31 pm
Posted in Classifieds - Parts
Replies: 3
by 23ford » Fri Feb 27, 2026 11:53 pm » in Classifieds - Parts

First post

,Need a couple of coil box lids 3 piece style thank you

Last post

Sorry I didn’t find anything usable.

3 Replies

390 Views

Last post by Ruxstel24
Mon Mar 02, 2026 5:31 pm
WTB brass rad hood support rod end

Last post by Dan Hatch « Mon Mar 02, 2026 5:19 pm
Posted in Classifieds - Parts
Replies: 1
by Karl Von Neumann » Mon Mar 02, 2026 4:52 pm » in Classifieds - Parts

First post

Wanted is the hood rod attachment from a 09 to 16 brass rad trying to be budget friendly and rebuild my Radiator could use a upper rad hose attachment as well a orignal not the heavy cast brass repos.

Last post

Look here. Still have some. Dan

1 Replies

145 Views

Last post by Dan Hatch
Mon Mar 02, 2026 5:19 pm
Hempy Cooper Jig

Last post by Joe Bell « Mon Mar 02, 2026 5:03 pm
Posted in General Discussion Forum
Replies: 8
by laltenhofen » Sun Mar 01, 2026 8:47 am » in General Discussion Forum

First post

1938 calling here. Anybody got one they're willing to sell me for $85?? Remember, it's whatever the market will bear. :)

Last post

150. plus the ride, I have another one that has been broken and brazed back up, that would would be cheap.

8 Replies

522 Views

Last post by Joe Bell
Mon Mar 02, 2026 5:03 pm
TT C Cab windshield filler

Last post by abcarswell « Mon Mar 02, 2026 3:36 pm
Posted in General Discussion Forum
Replies: 7
by abcarswell » Sat Feb 10, 2024 2:34 pm » in General Discussion Forum

First post

Do any of my fellow TT C Cab owners have any information on the strip that fills the gap between the cab and the windshield. From what I can see on the parts book, it is likely called a visor part #TT12350. I assume it’s leather but would like to know dimensions, attachment details, etc. Pictures would be great.

Last post

I figured since I was posting today, I’d revive this old post and show how my Visor turned out. My sister is a pretty good seamstress so helped with sewing up some of my excess top material which I finally got around to installing today. I’m happy with the results. IMG_0555.jpeg IMG_0556.jpeg

7 Replies

1217 Views

Last post by abcarswell
Mon Mar 02, 2026 3:36 pm
For Sale: 1908-1912ish Brass Headlamps

Last post by GGZ « Mon Mar 02, 2026 1:58 pm
Posted in Classifieds - Parts
Replies: 6
by GGZ » Fri Jan 09, 2026 8:59 pm » in Classifieds - Parts

First post

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

Last post

Still for sale

6 Replies

1453 Views

Last post by GGZ
Mon Mar 02, 2026 1:58 pm
Ignition Coil Points Shortage Has Been Resolved !!!

Last post by MKossor « Mon Mar 02, 2026 1:31 pm
Posted in Classifieds - Parts

by MKossor » Mon Mar 02, 2026 1:31 pm » in Classifieds - Parts

For E-Timer users...

They never worry about coil point or capacitor availability, maintenance or replacement.
They just enjoy superior engine performance, zero maintenance and excellent reliability.

Please Visit: www.modeltetimer.com for more information about the E-Timer, simple drop in installation or to place an order.

E-Timer P3 Board...

0 Replies

277 Views

Last post by MKossor
Mon Mar 02, 2026 1:31 pm
Fairground photo 1926.

Last post by TXGOAT2 « Mon Mar 02, 2026 12:39 pm
Posted in General Discussion Forum
Replies: 5
by John kuehn » Sun Mar 01, 2026 3:41 pm » in General Discussion Forum

First post

This is supposed to be at the Rutland fairgrounds. But where. The photo is captioned 1926.
Looks like the cars were parked pretty well and tight. Is that some sort of track around it?

Last post

It's good to see the track is still there, and that the background is NOT covered over with development .

5 Replies

412 Views

Last post by TXGOAT2
Mon Mar 02, 2026 12:39 pm
Champion X plugs fs. Sold

Last post by CTLeonard « Mon Mar 02, 2026 10:08 am
Posted in Classifieds - Parts

by CTLeonard » Mon Mar 02, 2026 10:08 am » in Classifieds - Parts

Have two sets (8) plugs fs. Made in u.s.a. 25.00 each plus shipping. ctleonard64@gmail.com IMG_20260302_090339215.jpg IMG_20260302_090348623.jpg

0 Replies

291 Views

Last post by CTLeonard
Mon Mar 02, 2026 10:08 am
WTB Handbrake FOUND

Last post by RGould1910 « Mon Mar 02, 2026 9:49 am
Posted in Classifieds - Parts
Replies: 4
by RGould1910 » Sat Feb 28, 2026 12:28 pm » in Classifieds - Parts

First post

Looking for a late model (stamped cam) handbrake with little to no wear between the bracket and the shaft.. I can replace the tooth and spring if need be. Using it on a 27 roadster.

Last post

Thanks Mark will do!

4 Replies

373 Views

Last post by RGould1910
Mon Mar 02, 2026 9:49 am
Aluminum intake fs

Last post by CTLeonard « Mon Mar 02, 2026 9:28 am
Posted in Classifieds - Parts

by CTLeonard » Mon Mar 02, 2026 9:28 am » in Classifieds - Parts

85.00 plus shipping. ctleonard64@gmail.com IMG_20260302_082417286.jpg kk IMG_20260302_082404342.jpg

0 Replies

278 Views

Last post by CTLeonard
Mon Mar 02, 2026 9:28 am
Lego T

Last post by dykker5502 « Mon Mar 02, 2026 2:57 am
Posted in General Discussion Forum
Replies: 7
by Daisy Mae » Mon Feb 09, 2026 2:27 pm » in General Discussion Forum

First post

Get it for your grandkids! Get it for yourself!
To be issued in March.

LEGO 11376 Ford Model T celebrates the revolutionary automobile - Jay's Brick Blog

Last post

The owner of Legogroup, Keld Kirk Christiansen, have a very impressive classic car collection (I've seen it) and it of course includes a 1912 (I think) Ford Model T Torpedo. No pictures as I was not allow to.

7 Replies

972 Views

Last post by dykker5502
Mon Mar 02, 2026 2:57 am
Duncan,Ok. swapmeet wanted to buy

Last post by South Park Zephyr « Sun Mar 01, 2026 7:25 pm
Posted in Classifieds - Parts
Replies: 17
by Gene_French » Sun Jan 18, 2026 12:29 pm » in Classifieds - Parts

First post

i am starting this post in possibly the wrong section BUT ... the Duncan,Ok. swapmeet is coming up in March and i am attending to sell as well as purchase some parts for my projects ... i am WANTING TO BUY ...a windshield frame for a 1931 Murry body model A 4dr., Masonic items from the 1900-1930 era , and 4 cyl. Dodge Brothers items ,particularly...

Last post

Gene,

Here are several to choose from, some rebuilt, you would need to look at distance from you to judge the value.

Scott

17 Replies

2338 Views

Last post by South Park Zephyr
Sun Mar 01, 2026 7:25 pm
sediment bowl

Last post by Melba Nolan « Sun Mar 01, 2026 7:02 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Sat Jan 31, 2026 12:56 pm » in Classifieds - Parts

First post

For sale: sediment bowl $50 plus postage

20250324_144554.jpg 20250324_144608.jpg 20250324_144642.jpg

Last post

move to top

2 Replies

1037 Views

Last post by Melba Nolan
Sun Mar 01, 2026 7:02 pm
running board brackets

Last post by Melba Nolan « Sun Mar 01, 2026 7:01 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Sat Feb 21, 2026 12:08 am » in Classifieds - Parts

First post

For sale: 4 running board brackets $50 for all plus shipping
one has a flat spot with a hole in it
20260130_112812.jpg 20260130_112750.jpg

Last post

move to top

1 Replies

346 Views

Last post by Melba Nolan
Sun Mar 01, 2026 7:01 pm
water outlet

Last post by Melba Nolan « Sun Mar 01, 2026 7:01 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Sat Feb 21, 2026 12:20 am » in Classifieds - Parts

First post

For sale: water outlet and fan bracket $75 plus shipping
has very light Ford script
20260210_141200.jpg 20260210_141233.jpg 20260210_141316.jpg

Last post

move to top

1 Replies

356 Views

Last post by Melba Nolan
Sun Mar 01, 2026 7:01 pm
Looking for ‘04 Front springs

Last post by BillWitmer « Sun Mar 01, 2026 6:36 pm
Posted in Early Ford Forum - pre-T
Replies: 2
by CFBass » Sun Mar 01, 2026 3:10 pm » in Early Ford Forum - pre-T

First post

I am in need of a pair of original, correct front springs, more specifically, the bottom leaf of the top spring with the attachment detail to the lower spring as shown below:

6186827438983271373.jpeg

Last post

Try E&L spring shop. They are located in Middlefield,Ohio. Check out their website. Good luck with your search.

2 Replies

145 Views

Last post by BillWitmer
Sun Mar 01, 2026 6:36 pm
FS Rubes Horn

Last post by fordrelic « Sun Mar 01, 2026 6:25 pm
Posted in Classifieds - Parts
Replies: 2
by fordrelic » Thu Feb 12, 2026 9:37 am » in Classifieds - Parts

First post

Rubes Horn For Sale as pictured,

has reed and honks.

$225 plus shipping.

rubes horn.jpg

Last post

to the top

2 Replies

488 Views

Last post by fordrelic
Sun Mar 01, 2026 6:25 pm
For Sale: Large Rubes 3/4 Brass Bulb Horn Assembly

Last post by GGZ « Sun Mar 01, 2026 5:37 pm
Posted in Classifieds - Parts
Replies: 4
by GGZ » Fri Jan 23, 2026 11:57 am » in Classifieds - Parts

First post

This large Rubes 3/4 twist horn is about 10 tall and is about 6 wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40 long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished....

Last post

Still for sale

4 Replies

817 Views

Last post by GGZ
Sun Mar 01, 2026 5:37 pm
For Sale: Firestone 30x3.5 Demountable Rims

Last post by Allan « Sun Mar 01, 2026 5:08 pm
Posted in Classifieds - Parts
Replies: 4
by Ed Fuller » Fri Feb 20, 2026 5:10 pm » in Classifieds - Parts

First post

This is a nice pair of hard to find Firestone 30x3.5 demountable clincher rims. No heavy pitting, just some light surface rust. The clincher edges are in very nice shape. I wouldn’t be surprised if these have never been used.

$200 for the pair plus shipping in the U.S.

IMG_9107.jpeg

IMG_9109.jpeg

IMG_9111.jpeg

IMG_9113.jpeg

Last post

Thanks Layden. I have kept them rather tan scrapping them. They are heavier than T clincher rims and would make ideal donor rims for wood felloe wheels once the valve stem boss was removed.

Allan from down under.

4 Replies

571 Views

Last post by Allan
Sun Mar 01, 2026 5:08 pm
Roof Covering

Last post by Allan « Sun Mar 01, 2026 4:57 pm
Posted in General Discussion Forum
Replies: 7
by johnr » Fri Feb 27, 2026 12:33 pm » in General Discussion Forum

First post

What would normally have been used for the roof covering for a light delivery
or depot hack ?

Last post

Re-treating a treatment is not needed if the first treatment is not applied. Canvas wets, and then it dries. Damp canvas on Dacron sheeting is not a problem like using old time cotton waste sheeting. Even if it gets really wet through to the hessian/burlap, the cedar laths remain unaffected.

Allan from down under.

7 Replies

416 Views

Last post by Allan
Sun Mar 01, 2026 4:57 pm
FS Aermore Exhaust Whistle

Last post by Mark Gregush « Sun Mar 01, 2026 2:52 pm
Posted in Classifieds - Parts
Replies: 2
by ThreePedalTapDancer » Wed Feb 25, 2026 3:43 pm » in Classifieds - Parts

First post

Here is a very rare 9 inch original Aermore exhaust whistle. Includes exhaust pipe butterfly adapter and brass foot pedal. This is a very rare Aermore whistle, seldom seen. Its smaller size allows for a shrill train whistle sound using the lower T compression even at slow speeds. The whistle is about 9 inches long, and 3/4 diameter flutes. The...

Last post

Ed I think this was the Motorcycle size but would still work.

2 Replies

419 Views

Last post by Mark Gregush
Sun Mar 01, 2026 2:52 pm
FS GENERATOR FRONT COVERS

Last post by got10carz « Sun Mar 01, 2026 2:36 pm
Posted in Classifieds - Parts
Replies: 3
by got10carz » Thu Nov 20, 2025 4:15 pm » in Classifieds - Parts

First post

For Sale Generator front covers. $10 each. 2 must be 26-27. Steve 701 212 5009

Last post

To the top

3 Replies

575 Views

Last post by got10carz
Sun Mar 01, 2026 2:36 pm
rear spring perch tool

Last post by sweet23 « Sun Mar 01, 2026 1:04 pm
Posted in Classifieds - Parts
Replies: 4
by Melba Nolan » Sat Dec 13, 2025 10:04 am » in Classifieds - Parts

First post

For sale: Rear spring perch wrench Ford #5Z197 $100 plus postage

20250908_184520.jpg

Last post

Melba, I am looking for 5-Z-206 rear axle nut wrench and a 5-Z162 cam nut T handle wrench. Any chance you have either of those? Darryl

4 Replies

760 Views

Last post by sweet23
Sun Mar 01, 2026 1:04 pm
Need help identifying electrical part

Last post by Pep C Strebeck « Sun Mar 01, 2026 11:31 am
Posted in General Discussion Forum
Replies: 1
by EdWhite » Sun Mar 01, 2026 11:26 am » in General Discussion Forum

First post

Hey guys, need some help identifying these two wiring cables. One is a few inches longer than the other. They have a spring and a brass contact on the ends. If you guys have any idea what these are for let me know. Thank you. Appreciate it.

Last post

Ford Model A Pop-Out Cable, from the switch to the distributor. The one with the forged clamp for the head stud is earlier.

1 Replies

196 Views

Last post by Pep C Strebeck
Sun Mar 01, 2026 11:31 am
tank brackets

Last post by David Greenlees « Sun Mar 01, 2026 10:40 am
Posted in Classifieds - Parts
Replies: 6
by Melba Nolan » Sun Jan 04, 2026 9:47 pm » in Classifieds - Parts

First post

20220726_183551.jpg 20220726_183724.jpg

For sale: gas tank brackets $50 plus shipping

Last post

Those are '26 - '27 cowl tank brackets, David.

Steve, Thanks for identifying them.

6 Replies

808 Views

Last post by David Greenlees
Sun Mar 01, 2026 10:40 am
Attempting to Locate 1926 Model T Coupe

Last post by Mark Gregush « Sun Mar 01, 2026 10:31 am
Posted in General Discussion Forum
Replies: 1
by schouviller » Sun Mar 01, 2026 10:17 am » in General Discussion Forum

First post

I am seeking assistance in locating a 1926 Ford Model T Coupe that holds significant historical and personal value.

The vehicle was sold in the late 1980s at the Minneapolis Armory. At the time of sale, the purchaser—believed to have resided in or near the Wisconsin Rapids area of Wisconsin—acquired several collector vehicles during the same...

Last post

Mark, I wish you luck on finding this car but honestly, that is a pretty common combination of colors, so without the serial number, it is going to be tough.
I would suggest editing your post and remove personal contact information from the actual post and use the PM or email through the site for contact. Anyone can read this site/page even if not...

1 Replies

188 Views

Last post by Mark Gregush
Sun Mar 01, 2026 10:31 am
bolts

Last post by Melba Nolan « Sun Mar 01, 2026 7:54 am
Posted in Classifieds - Parts

by Melba Nolan » Sun Mar 01, 2026 7:54 am » in Classifieds - Parts

For sale: assortment of bolts $25 plus small flat rate box

20260203_161314.jpg

0 Replies

200 Views

Last post by Melba Nolan
Sun Mar 01, 2026 7:54 am
Wanted to Buy-EZ power unit for Model T Tractor conversion

Last post by BaltimoreTMan « Sun Mar 01, 2026 12:47 am
Posted in Classifieds - Parts

by BaltimoreTMan » Sun Mar 01, 2026 12:47 am » in Classifieds - Parts

I'm looking for an EZ Power Unit for my Model T Shaw Tractor conversion. Let me know if you have one for sale please. Just send me an email. Thanks!

Alex, Baltimore Maryland

0 Replies

199 Views

Last post by BaltimoreTMan
Sun Mar 01, 2026 12:47 am
1915 Fronty Speedster For Sale

Last post by GGZ « Sat Feb 28, 2026 7:28 pm
Posted in Classifieds - Vehicles
Replies: 3
by AZVT » Fri Feb 27, 2026 2:10 pm » in Classifieds - Vehicles

First post

For Sale: Unfinished project with long racing history, looking for someone to finish the fine points and realize it's true potential.
This speedster build was started in the 1960's by Lemual Austin Pratt, a skilled machinist who worked for Offenhauser Racing. The engine was found in a barn in Blue Jay, California, still in the original wooden...

Last post

That's a rare Winfield.

3 Replies

939 Views

Last post by GGZ
Sat Feb 28, 2026 7:28 pm
For sale: rebuilt engine and transmission

Last post by BobProc « Sat Feb 28, 2026 7:07 pm
Posted in Classifieds - Parts
Replies: 24
by Michael Peternell » Sat Sep 27, 2025 2:28 pm » in Classifieds - Parts

First post

I have a completely rebuilt engine and transmission that I don't need. Serial number 2347110. $4800.00.
Located in Kandiyohi MN. Pm or email me with any questions. I can help with shipping via Fastenal or other carrier.
Mike Peternell

Last post

I'd like to buy your engine.

24 Replies

4932 Views

Last post by BobProc
Sat Feb 28, 2026 7:07 pm
Free TT Rear Axle Parts

Last post by Bob_Rogers « Sat Feb 28, 2026 7:04 pm
Posted in Classifieds - Parts
Replies: 2
by Bob_Rogers » Sat Feb 28, 2026 2:56 pm » in Classifieds - Parts

First post

See photos for condition. Early rear end housing with “bead.” Pickup near Fort Worth. May deliver to Duncan car show? But you have to buy me a Coke and hot dog.

Last post

Parts have been spoken for.

2 Replies

235 Views

Last post by Bob_Rogers
Sat Feb 28, 2026 7:04 pm
counter weights New Price

Last post by Texasroadkill « Sat Feb 28, 2026 5:56 pm
Posted in Classifieds - Parts
Replies: 5
by Melba Nolan » Thu Dec 15, 2022 9:49 pm » in Classifieds - Parts

First post

For sale: Crankshaft counter weights. $75 plus shipping
20220726_174038.jpg 20220726_174125.jpg

Reduced price $50 plus postage

Last post

How much would shipping be to Texas? 78222

5 Replies

1515 Views

Last post by Texasroadkill
Sat Feb 28, 2026 5:56 pm
Fender Mounting Brackets

Last post by TRDxB2 « Sat Feb 28, 2026 4:55 pm
Posted in Classifieds - Parts
Replies: 3
by George House » Sat Feb 28, 2026 11:06 am » in Classifieds - Parts

First post

Is there any interest/need for ‘18-‘25 front and rear fender mounting brackets ? I’m considering scrapping many unrestorable fenders but would like to remove these brackets for future use. Altho slightly pitted, they’re all solid. Do new fenders come with brackets ? In the picture I’ve heated the eyelet nut for removal.

Last post

Good news.. thanks Frank… I’ll start collecting them

Just need grind off the rivet heads on top of the fender.

3 Replies

253 Views

Last post by TRDxB2
Sat Feb 28, 2026 4:55 pm
FS 1913 Holley 2 screw Model S Carb $375.00

Last post by Phillip O « Sat Feb 28, 2026 1:13 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Fri Feb 27, 2026 12:52 pm » in Classifieds - Parts

First post

For Sale. Rebuilt 1913 Model S Holley carburetor. One year only 2 screw design. $375.00 plus shipping. Lang’s 1-800-872-7871

Last post

E mail sent

1 Replies

283 Views

Last post by Phillip O
Sat Feb 28, 2026 1:13 pm
Bakersfield Swap meet is GO !

Last post by SoNorCal « Sat Feb 28, 2026 11:18 am
Posted in General Discussion Forum
Replies: 27
by SoNorCal » Fri Jan 23, 2026 11:32 pm » in General Discussion Forum

First post

All,
The Bay Area Horseless Carriage Club is stepping in to take over the “Bakersfield” swap meet. The event will be the same location and date, Price per space will be 65 dollars. More information will be forthcoming soon.

This is just a quick announcement moments after the vote to let everyone know Bakersfield Lives again.

More to Follow

Last post

Someone asked me to repost the daily schedule and lodging information here, even tbough the latest and greatest information is on the web site

MINTER AIRFIELD
201 Aviation Street – Shafter, CA – (A few miles North of Bakersfield on Hwy 99)

Swapper set-up; Friday morning
Swap Meet; Friday & Saturday
Swapper Space (20′ x 40′) $65 / Buyers $10...

27 Replies

2701 Views

Last post by SoNorCal
Sat Feb 28, 2026 11:18 am
knock out wheel pullers

Last post by Melba Nolan « Sat Feb 28, 2026 10:51 am
Posted in Classifieds - Parts

by Melba Nolan » Sat Feb 28, 2026 10:51 am » in Classifieds - Parts

For sale: 2 Stevens knock out pullers and one unknow $40 plus postage
T 153D - 1 T 153A - 5/8 no name 1

20260222_163536.jpg 20260222_163607.jpg

0 Replies

206 Views

Last post by Melba Nolan
Sat Feb 28, 2026 10:51 am
exhaust manifold

Last post by Melba Nolan « Sat Feb 28, 2026 10:34 am
Posted in Classifieds - Parts
Replies: 3
by Melba Nolan » Sat Aug 02, 2025 2:03 pm » in Classifieds - Parts

First post

for sale: exhaust manifold $50 plus postage
20250607_170344.jpg

Last post

move to top

3 Replies

1350 Views

Last post by Melba Nolan
Sat Feb 28, 2026 10:34 am
worm gear

Last post by Melba Nolan « Sat Feb 28, 2026 10:34 am
Posted in Classifieds - Parts
Replies: 7
by Melba Nolan » Tue Oct 22, 2024 3:54 pm » in Classifieds - Parts

First post

For sale: worm gear $50 plus postage
20221120_091917.jpg 20251224_081241.jpg

Last post

move to top

7 Replies

2246 Views

Last post by Melba Nolan
Sat Feb 28, 2026 10:34 am

Search found 162 matches

Go to advanced search