MTFCA Forum

email sent

You're still asking questions on your 2 year old thread...Gene Carothers offered advice on a source who rebuild wheels and opinions on the viability of keeping or replacing the rubber tires. It appears that you took the opportunity to avoid that help.

Now you're back asking if fellos can be replaced without replacing the rubber tires - and 99% of...

Mick, thanks! That is perfect. Pretty much what I thought but wanted to be sure.

I have new nuts on the way.
Axle is straight.
Holes were tight just bushings shot.

Out of curiosity, what is the Stevens front axle tool?

Names Frank not a Mick

My way would be to ship without the flywheel/mag coil ring like it would have come new. :)

Fun day outing giving rides to any willing attendees at a local thrift fest!

Screwdriver spoken for.
Allan from down under.

At $200 I think I will pass!
Allan from down under.

My experience is that any new engine will run on pretty much any plug, but an original tired engine will tend to run best on original Champions (I could not even start my '13 on Autolites - not so much as a POP ).

For the price of just 1 box of autolites or less, you can purchase a lifetime supply of original (not reproduction) Champion X plugs...

Donnie:
looks like i will not be bringing a trailer this year ... have sold the 1927 wire wheel chassis and i think i can cram all my extra items in my pickup ... will be tight , but i don't have any bulky items ... will have to be creative with my packing ... still looking for a windshield frame for a 1931 Model A Murry body 4dr. ...this is the...

5 sets sold, 1 set of 4 points left!

Found one. Thanks for all those who emailed me.

To the top

I contacted the office and there were some unforeseen delays in production.
The Jan/Feb issue should arrive in abut a week.

Keith

Email sent

Hi Ron
I am having issues with my 23 T and I think it might be the coil boxes how do I contact you .

Thank you Frank. I'll wait for Bills email.

Back to the top. Nice body.

To the top

I am going to throw out another shift option:

Years ago I rode as navigator with an old timer (now passed on) Model T guy on a tour.
He had a '13 depot hack with a ruckstell center shifter.
When he went to shift forward he used his right foot.
He laid his foot up against the shift rod resting his heel on the floor.
When things were right, he...

i will take them for $15.00
tom

Sorry Tom, this was sold on FB, and I forgot to update the listing here.

When picking up broken up and mashed up coil boxes for parts I saved them for the contacts and porcelain insulators. Glad I saved the parts. If I remember the porcelain insulators were specific for the earlier cars. They had had a really nice polished finish while the later ones finish was not as polished. Remember reading about it some where.

We have an original available. $85.00
May also have the S clamp.
Lang’s 1-800-872-7871 ( Monday morning )

Still for sale

probably will not bring my trailer ... i have sold the 1927 wire wheel chassis ... will have the pickup packed to the gills and probably have to strap some items on the down tailgate ... will look like the Joads returning to Oklahoma ! meet will be here soon , looking forward to seeing many friends there ...be safe ..Gene French

Or same exact pic with two different drivers AI inserted, but there are several variations between the two pics besides the drivers, not to mention camera angle.

Sold to Perry!

To add my 25 cents worth and be helpful, I would think this would be a very correct addition to a late '26 or '27 T as they were intended as an alternative to the Holley Vaporizer. I have one like this in near new condition that I intend to try on my own very late '27 Canadian T . The Regenerator is supposedly a very good carb, fuel efficient and...

burner tips are all sold, everything else is still available

More photos

To the Top

to the top please

Price drop

Price decrease

To the top

Down $5.00

I'm with you. Its likely because people don't know how to update their post by clicking on the pencil icon to put SOLD in the heading. That action doesn't advance the post

Hello Tom I had been in contact with you a few weeks ago, about purchasing a visor frame for 23-25 closed cars. In my last email I had asked about payment options and if shipping costs were included in the cost that you had quoted. I never heard back. Did my emails not go through, or is there some other problem? Could you please contact me again,...

Hello Mike I received the photo of the windshield garnish that you emailed to decarriages@ibyfax.com. I did send a reply asking how long the pieces are, if you could send photos of the back side, and what the cost would be for the two pieces. I am not quite sure if they are what I need.
I never heard back from you, so am wondering if my emails...

up to the top

Bauer wheel sold. Thanks David

Sold thanks Bill

thanks Ed sold

David good to hear from you. I would like to get down to your place and catch up.
Fitz

I just measured an original and a hardwood replacement kit. They are 1/2 thick.

Good day Kim, pm sent

I have a new Nordic recliner chair. :D :D
Allan from down under.

Oregon has a procedure to establish a title for an existing car that does not have a title. You'll be far better served by following their lead than trying to jimmy-up an existing title with VIN and force that VIN onto your car...that sounds like a short path to a whole lot of trouble.

It looks like Pacific Auto Rentals did a lot of modifications on cars to keep them on the road.

Pacific Auto Rentals.jpeg

The rumble seat on this car looks like a Model S roadster and the handles on the back of the seat are visible.
However, the body base looks more like a Model N or R. There is no cowl like the Model S roadster.
And the...

It’s going out now! More and more should start seeing it in their mailboxes.

Already have my entry in, looking forward to another year.

Andy

you can edit the subject line and add Model A

You could join the Milwaukee Club and we will send a crew up to help you.

Very Nice County Fair body Ed...., Should sell quickly at that price!

More photos

How about 175.00 including shipping in the USA.

Your single straight on picture doesn't show enough details to tell much.
Is the rim a clincher or straight side? Is that a separate ring going around the felloe to clamp the rim onto the wheel? Is that atypical Ford hub in the center? Or something different? Do ALL the holes in that clamp/ring go all the way through the felloe also?

Answers lay...

move to top

On the older style with the pressed in sleeve, the sleeve has a hole where the stepped bolt fits into it to retain it in the housing. If one were to get creative (which in this case shouldn't, one could drill and tap that stepped bolt for a small zerk.
In this case as stated above, not needed as it gets plenty of lube from the rearend along with...

Early 6 cylinder designs tended to have issues with crankshaft flexibility, twist, and torsional vibration. 7 main bearing designs only party dealt with these issues. Hudson made a huge step forward with crankshaft counterbalancing, and Lanchester made another leap forward with the harmonic damper. Counterweighted crankshafts and harmonic...

Please update ad placement in forum classifieds.

Please update placement of this ad for sale.

How about $700 ?

I will take them

I wounder what something like that is worth, the way my home state is going it mite make a great place to retire.

Thanks Paul!

Hi Kim. I sent payment for two 6 inch reflectors at the agreed price via PayPal but have not heard back from you. If you prefer check I will cancel the PayPal and send you a check.

Tim

Hey Uncle Walt / Larry: I am interested in this body but am out here in California.
Am going to research shipping to see if it makes sense, or any chance you know of anyone coming out west in the near future?
Not trying to waste your time but would like to see if we can work something out.
Thanks Chris Barker (805) 610-9553...

I should have a few. Choices from $125 each on up. Decent clincher tires are all but impossible to find. There is generally always some defect that seriously affects their usability that should be visible if carefully inspected, so I advise never to buy a clincher tire unless you can see it in person. Located in Wisconsin between Madison &...

Loctite 518 is specifically made for flange-type gasket creation - It is not designed for pipe fittings and thus, I would NOT use it for NTP fittings

If you simply MUST spend more money on a Loctite product, then spend it on 545 which is specifically made for pipe fittings and is fuel and alcohol proof

The added bonus to any Loctite product when...

TTT please

TTT please

TTT please

And some more

Chaffins sells the bell crank and other linkage parts.

Some tools make memories which last. I was given a plastic tool roll by a Model T Club member for my 21st birthday. It was German made quality and had all sorts of blades which fitted into a lock-on screwdriver handle, some pliers and a punch or two. I lost a couple of bits over the years. Just a few years ago I found am almost complete kit in as...

Will sent you an answer by the forum. Dan

IMG_7668.jpeg

Thanks!! :)

:lol: :lol: :lol: :lol: Thanks guys for a great laugh today.

No casting number I can find. Just KR Wilson
Buffalo, NY embossed and the red stamp.

Hi. any idea of the dimensions? I'm looking for something that is 12 pitch 2.25 approx OD.

IMG_4758.jpeg
IMG_4759.jpeg
IMG_4760.jpeg
IMG_4761.jpeg
IMG_4762.jpeg