MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 206 matches

Topics

Replies

Views

Last post

A model T fits in with any event.

Last post by Scott_Conger « Sat May 21, 2022 9:32 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Dallas Landers » Sat May 21, 2022 8:04 pm » in General Discussion Forum (started 2019)

First post

I spent the day helping with an event at the International Monster Truck Museum. A car show/ truck show. A couple of us were in charge of the moonshine race. A timed race picking up jugs from strategic places on the monster truck track. It was open to anything. Of course my T, a 25 DB, a 28 DB, and many 4x4 trucks. 20220521_092911.jpg...

Last post

Hank I heard that turpentine was more powerful than Holy Water...a feller once told me that if you rub some on a cat's a** it will pass a bus.

5 Replies

80 Views

Last post by Scott_Conger
Sat May 21, 2022 9:32 pm
1920 T pickup photos

Last post by TampaT « Sat May 21, 2022 9:24 pm
Posted in General Discussion Forum (started 2019)
Replies: 44
by TampaT » Mon May 16, 2022 8:42 am » in General Discussion Forum (started 2019)

First post

Hello all,

I finally made my way up north and got a look at the 1920 Model T that I posted about a month ago. Have a look at this amazing car and tell me what you think.

Rich in Tampa

Last post

Yes, JT, and you're the DB who blew up the photo, posted the google earth location, along with the shop's contact info. Don't blame me for your egregious display of bad form.

44 Replies

1264 Views

Last post by TampaT
Sat May 21, 2022 9:24 pm
Rebuilt T Starters for Sale & 12 volt starter conversions

Last post by AdminJeff « Sat May 21, 2022 9:22 pm
Posted in Classifieds - Parts
Replies: 8
by AdminJeff » Thu Mar 11, 2021 11:01 am » in Classifieds - Parts

First post

COMPLETELY REBUILT STARTERS NOW FOR SALE.

The 6 Volt starters w/ with BRAND NEW field coils are $375 each with core exchange
ONE YEAR , unconditional, no questions asked warranty ALSO included.
If you don't have a rebuildable core, the Core charge is $25
Shipping is $21 fully insured anywhere in the USA.
.
5 starters.png
.
As soon as...

Last post

ONE 6v starters left

8 Replies

2868 Views

Last post by AdminJeff
Sat May 21, 2022 9:22 pm
Hood Alignment

Last post by TXGOAT2 « Sat May 21, 2022 9:21 pm
Posted in General Discussion Forum (started 2019)

by TXGOAT2 » Sat May 21, 2022 9:21 pm » in General Discussion Forum (started 2019)

The hood on my '27 T tends to ride forward until it's too close to the radiator shell. I tried putting a short piece of hood lacing in the front hinge rod clip on the radiator shell. That helped a little, but after a few tens of miles of driving, the hood would creep forward on the hinge rod and again be too close to the shell. I got tired of...

0 Replies

4 Views

Last post by TXGOAT2
Sat May 21, 2022 9:21 pm
sediment bowl

Last post by John kuehn « Sat May 21, 2022 9:12 pm
Posted in General Discussion Forum (started 2019)
Replies: 3
by andy2794 » Sat May 21, 2022 7:43 pm » in General Discussion Forum (started 2019)

First post

When I cleaned and painted the frame of my 1916 Touring I removed the gas tank so I could paint that part of the frame and then painted the gas tank. When I put the gas tank back on I could not start the T. I figured out that I was not getting fuel. I must have stirred up the sediment in the gas tank. So I drained all the gas and got a lot of...

Last post

Yes take apart the sediment bulb. As above get a new lead gasket for it. Sometimes you can take them apart and find that some body had a slow gas issue and punched a small screwdriver through the filter screen to open it up. Hope you won’t find that.
Also might be a good idea to take the tank off again and shake it good with pea gravel to loosen...

3 Replies

59 Views

Last post by John kuehn
Sat May 21, 2022 9:12 pm
Connecting rods

Last post by John kuehn « Sat May 21, 2022 9:00 pm
Posted in General Discussion Forum (started 2019)
Replies: 4
by SteveD » Sat May 21, 2022 6:42 pm » in General Discussion Forum (started 2019)

First post

I've had my 24 touring for a couple of months. Heard a little more noise from the crank then I liked so I thought I'd investigate. Henry says there should be a little movement when tapped with a brass hammer, I could get side movement with my hand. Ok, time for Plasti gauge and some shim removal. But looking up the cylinder bores, I see that two...

Last post

Taken apart several T engines for parts and rebuild and seen it done cam side and and the opposite then whatever. Wouldn’t change it now. Re shim as necessary until the next time. Good luck!

4 Replies

123 Views

Last post by John kuehn
Sat May 21, 2022 9:00 pm
15-16 hood former little holes?

Last post by Scott_Conger « Sat May 21, 2022 8:55 pm
Posted in General Discussion Forum (started 2019)
Replies: 3
by Steve Jelf » Sat May 21, 2022 5:49 pm » in General Discussion Forum (started 2019)

First post

Screen Shot 2022-05-21 at 4.32.44 PM.jpg
I assume some fasteners go in these two little holes. What are they?

Last post

Well, for heaven's sake, thank you Rich. I don't think I've ever noticed a hole or a fastener there on my '16. I'm going out to the barn right now to take a look!

Thanks for the correction!

3 Replies

99 Views

Last post by Scott_Conger
Sat May 21, 2022 8:55 pm
Delivery Car Project

Last post by Michael A « Sat May 21, 2022 8:49 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by Tbird » Sat May 21, 2022 8:36 pm » in General Discussion Forum (started 2019)

First post

Well after about 10 years of collecting parts and research I've officially started on building my delivery car body. I do this kind of stuff when I have time and $. Thought you all would like to see the progress so far.

Here is all my body irons made up
IMG_0055.JPG

I ordered some Ash wood from the local Amish mill for the sills and the rest...

Last post

Nice start Mike, thanks for sharing.
Keep us up to date with the progress.
Michael A

1 Replies

60 Views

Last post by Michael A
Sat May 21, 2022 8:49 pm
Unused Horseless Carriage Plates

Last post by Charlie_26_TT_Ccab « Sat May 21, 2022 8:44 pm
Posted in Classifieds - Parts
Replies: 1
by ThreePedalTapDancer » Fri May 20, 2022 8:26 pm » in Classifieds - Parts

First post

Here is a set of new as issued, unused California Horseless Carriage Plates. Very nice. Stored for a very long time. 220.00 shipped to lower 48.

467DCC32-0DF6-4719-B477-D1418F8578A1.jpeg

Last post

Sent you an email.

1 Replies

256 Views

Last post by Charlie_26_TT_Ccab
Sat May 21, 2022 8:44 pm
A bit of era information from 100 years ago

Last post by Poppie « Sat May 21, 2022 8:38 pm
Posted in General Discussion Forum (started 2019)
Replies: 10
by Les Schubert » Wed May 18, 2022 3:39 pm » in General Discussion Forum (started 2019)

First post

In the Canadian province of British Columbia in 1922 they switched from driving on the left to driving on the right.
Curiously While I have seen/found RHD hogsheads in both aluminum and cast iron, I have not seen one with a starter.
Perhaps ford switched to selling LHD cars there in 1919 anyway!

Last post

Interesting JohnH, thanks....n,

10 Replies

542 Views

Last post by Poppie
Sat May 21, 2022 8:38 pm
Stromberg OF Carbs. Rebuilt

Last post by tman12 « Sat May 21, 2022 7:57 pm
Posted in Classifieds - Parts
Replies: 15
by Bruce Compton » Wed May 18, 2022 11:01 pm » in Classifieds - Parts

First post

I have three rebuilt Stromberg OF carbs. Complete, tested, and ready to go. I used some of the Tim Morsher steel replacement parts on these carbs. All three have new steel needles (identical to the originals) and the extra choke spring added so you can use the stock T choke mechanism to pull the choke on and the spring pulls it open . All three...

Last post

I think that is a poor way to treat a Farmer trying to do his Job? i really wanted the carb & that is why I spoke for one so early! Thanks Anyway John

15 Replies

697 Views

Last post by tman12
Sat May 21, 2022 7:57 pm
Thoughts on type of gas

Last post by Jerry VanOoteghem « Sat May 21, 2022 7:14 pm
Posted in General Discussion Forum (started 2019)
Replies: 51
by Bryce S. » Mon May 16, 2022 2:10 pm » in General Discussion Forum (started 2019)

First post

I'm curious about what people tend to like to run their T's on. I know that today's gas is much better than it ever has been but is everyone just running regular 87 or is it worth going out of the way to find ethanol free fuel? I can do either since my carb has a drain on the bottom of it so no fuel will be sitting in the carb for extended periods...

Last post

The question has no single answer.

I guess you're right, and since the OP did ask for thoughts , he's getting his money's worth :)

51 Replies

1229 Views

Last post by Jerry VanOoteghem
Sat May 21, 2022 7:14 pm
Advice Please on flexi universal joint disc

Last post by Rata Road « Sat May 21, 2022 6:54 pm
Posted in OT - Off topic
Replies: 9
by Rata Road » Fri May 20, 2022 4:44 pm » in OT - Off topic

First post

I have recently bought a 1930 Triumph Super 7 car that has been off the road for 22 years. I now have it driving but I have a vibration.
I think its the drive shaft (check the video link) so that's away being checked, straightened and balanced etc.
The car has a drive tube from the diff halfway up the car and then a solid drive shaft about half a...

Last post

Thanks Guys,
The car has been restored maybe 1977 as that's when the registration was renewed and new number plates issued. But due to deceased estate sale I haven't been able to get any history (so far) so maybe the discs were replaced then? But it has sat all this century and maybe they stiffen up and set in a shape when not being spun on a...

9 Replies

134 Views

Last post by Rata Road
Sat May 21, 2022 6:54 pm
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by Rich Eagle « Sat May 21, 2022 6:23 pm
Posted in OT - Off topic
Replies: 3500
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

32

33

34

35

36
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

The crew is looking into it as we speak Herb.
I was asked several times on the way to Sumo choir What do the Baby Orchestras have to do with Kalamity Dick? It seemed this was a good place to answer that.
Orkastraw.jpg
Kalamity Dick sponsored several off the ensembles on his own. Nurturing them as they grew many of them perpetuated their music...
3500 Replies

578474 Views

Last post by Rich Eagle
Sat May 21, 2022 6:23 pm
WTB: Differential case, gears, axles and other stuff

Last post by Joe Bell « Sat May 21, 2022 6:05 pm
Posted in Classifieds - Parts
Replies: 2
by bmklawt » Sat May 21, 2022 10:25 am » in Classifieds - Parts

First post

Looking, for my 1927 Touring,
Differential case
Ring gear and Pinion
Spider
Spider gears
Axle
Axle gears
Pinion bearing
spool
Driveshaft
Break hub cam, left and right
Rocky Mountain Break, lining

Last post

Bruce, I have some in my collection of parts, no RockY stuff!

2 Replies

119 Views

Last post by Joe Bell
Sat May 21, 2022 6:05 pm
WTB #1800 swivel joint for 1911 ford

Last post by brian korth « Sat May 21, 2022 6:03 pm
Posted in Classifieds - Parts
Replies: 7
by brian korth » Thu Jan 20, 2022 9:53 am » in Classifieds - Parts

First post

still looking for # 1800 swivel speedometer joint for mid year 1911 ford. also need correct speedometer cable for same. to complete tool kit need correct spark plug wrench and hub cap wrench (may west style).

Last post

brian at (586-465-2306)

7 Replies

598 Views

Last post by brian korth
Sat May 21, 2022 6:03 pm
Hartford Tubes

Last post by Steve Jelf « Sat May 21, 2022 5:01 pm
Posted in General Discussion Forum (started 2019)
Replies: 4
by Original Smith » Fri May 20, 2022 11:35 am » in General Discussion Forum (started 2019)

First post

I have a friend who just received his new Hartford tubes with rubber valve stems. He needs to know if they will fit through the wood felloe of his wheels? I know the ones made in this country ten or more years ago would not. That's really a shame too, because when Firestone and Monkey Ward were making tubes, they would fit.

Last post

I wonder if they're making the stems wider. I don't recall ever having to drill a hole to make a stem fit. Or maybe I'm having an attack of Oldtimers. :)

4 Replies

253 Views

Last post by Steve Jelf
Sat May 21, 2022 5:01 pm
antique electric cars

Last post by Rich Eagle « Sat May 21, 2022 4:37 pm
Posted in OT - Off topic
Replies: 2
by Art Ebeling » Sat May 21, 2022 3:36 pm » in OT - Off topic

First post

Are there any antique electric car guys on here? I have searched the web for interest groups but have not found any. Art

Last post

This is a private group one could join.

2 Replies

45 Views

Last post by Rich Eagle
Sat May 21, 2022 4:37 pm
‘25 Interior Installation

Last post by modeltspaz « Sat May 21, 2022 4:33 pm
Posted in General Discussion Forum (started 2019)
Replies: 10
by Tadpole » Fri May 13, 2022 9:19 pm » in General Discussion Forum (started 2019)

First post

If anyone is awake on the forum, I’ve inevitably run into a couple questions installing the new interior.
On my seat base, do I have the carpet correct or is it upside down? And on the shoulder panels, what all hardware is used to install them?
My car had no proper interior in it prior so I am flying rather blind.

Last post

Guess I should have read Rich Eagle's post above. Seems like we both are on the same page about the rivets.
Tell Sally Hi for me when you see her, ok Rich? Miss working with her. She was always so pleasant to deal with and a very talented person. Guess it's true, that apple really doesn't fall too far from that tree.

10 Replies

324 Views

Last post by modeltspaz
Sat May 21, 2022 4:33 pm
Model N 1906 in a Swiss museum

Last post by KimDobbins « Sat May 21, 2022 4:28 pm
Posted in General Discussion Forum (started 2019)
Replies: 11
by joe.wal » Wed May 18, 2022 9:48 am » in General Discussion Forum (started 2019)

First post

Have been to the 'Pantheon' in Basel / Switzerland yesterday.
In a special exhibition between others there were a 1904 De Dion Bouton and a 1906 Ford Model N standing side by side.
Interesting to me to recognize the differences between old and new world cars in that case.
De Dion: 700 ccm engine with 6 HP, vehicle weight 560 kgs
Ford: 2419 ccm...

Last post

Mike, I sold all Bernie’s cars for his wife shortly after his passing. I’m pretty sure the model N got sold locally, Bernie very seldom sold cars and I don’t remember him saying anything about selling a car overseas. I surly could be wrong, memory is not what it once was!

11 Replies

783 Views

Last post by KimDobbins
Sat May 21, 2022 4:28 pm
Spiral wound rear axle roller bearings F/S

Last post by CudaMan « Sat May 21, 2022 3:59 pm
Posted in Classifieds - Parts
Replies: 2
by Layden Butler » Sun May 01, 2022 4:41 pm » in Classifieds - Parts

First post

USED rear car axle spiral wound roller bearings part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002 wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few Ford, all are the original style spiral wound...

Last post

I have what I need of these, but many don't - Thank you for making these available, sure hope that those that need them take advantage. :)

2 Replies

393 Views

Last post by CudaMan
Sat May 21, 2022 3:59 pm
Stevens Front axle tooling

Last post by Dan Hatch « Sat May 21, 2022 3:47 pm
Posted in Classifieds - Parts
Replies: 8
by Dan Hatch » Thu May 05, 2022 10:58 am » in Classifieds - Parts

First post

I am also going to make a run of the Reamer/Taps for the Stevens tool. Price will be $200 + shipping. If you want one email me at address in pictures. Thanks Dan 1F63BB1A-86D2-4CBF-8351-B678600E540B.jpeg

Last post

Back to the top

8 Replies

601 Views

Last post by Dan Hatch
Sat May 21, 2022 3:47 pm
Registering a trailer in Maine

Last post by J1MGOLDEN « Sat May 21, 2022 3:32 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Kbillet » Fri May 20, 2022 12:29 pm » in General Discussion Forum (started 2019)

First post

Has anyone done this and what is required? What are the benefits?
Keith Billet, PA

Last post

Then look at the number of those semi-tractors registered in Florida and ask why.

There are a couple of reasons!

6 Replies

221 Views

Last post by J1MGOLDEN
Sat May 21, 2022 3:32 pm
3 Gals and a '14 T - Models - WOW!

Last post by DanTreace « Sat May 21, 2022 3:30 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Rich Eagle » Fri May 20, 2022 2:17 pm » in General Discussion Forum (started 2019)

First post

Did I get your attention? :lol:
I have no connection with them but thought it was fun to see.
ICM1-24.jpg

They offer a Runabout too.
Rich
P S a Speedster too:

Last post

Don't know, maybe the factory is out of the war zones there. Hope so.

Bought the kit last year, from Europe supplier, don't think US plastic model vendors stock these limited interest kits. They are pricy. But golly, the detail and quality is amazing, full value for money spent to me.

Getting ready to paint the pants on these gals :D...

6 Replies

588 Views

Last post by DanTreace
Sat May 21, 2022 3:30 pm
WANTED: 26/27 Stop Light - Bracket Only

Last post by Larry « Sat May 21, 2022 2:52 pm
Posted in Classifieds - Parts
Replies: 23
by Jerry VanOoteghem » Tue May 03, 2022 1:43 pm » in Classifieds - Parts

First post

Looking for the 26/27 stop light bracket, circled. I have all the rest.

Thanks!

Email to: jerryvan65 AT yahoo DOT com

Capture.JPG

Last post

Sounds Good Jerry!

23 Replies

839 Views

Last post by Larry
Sat May 21, 2022 2:52 pm
For Sale - Stromberg Acorn Nuts

Last post by Scott_Conger « Sat May 21, 2022 1:59 pm
Posted in Classifieds - Parts
Replies: 11
by Scott_Conger » Tue May 17, 2022 10:16 am » in Classifieds - Parts

First post

New part, exactly correct. Finishing up a short run and will be available next week

please email me

sorry, no sales to California

Stromberg Bowl Nuts.jpg Stromberg Bowl Nut comparison 2.jpg

Last post

This short run is now complete and being packaged up. They are available with drilled vents (common configuration) and un-drilled, which is appropriate if your float bowl has a vent in the side, at the top (less common configuration).

Please EMAIL ME ...via the Contact button on the right side of the page. Thank you, and thanks for looking....

11 Replies

536 Views

Last post by Scott_Conger
Sat May 21, 2022 1:59 pm
Stevens Front Axle Tool. What is it?

Last post by Randall strickland « Sat May 21, 2022 1:56 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by Dan Hatch » Fri May 20, 2022 11:07 am » in General Discussion Forum (started 2019)

First post

I have been getting a lot of questions what is a Stevens Front Axle Tool lately. Guess most from new guys. So here is a link to the video that Bill Robinson made many years ago of the basic of the tool in action. Thanks to Bill for his work in making and posting it.
Enjoy

I am making a run of the cutting tools once again. Will be ready late...

Last post

Hey Dan here's a video I made a while back using tool on car, hope you don't mind me sharing
Randall

1 Replies

183 Views

Last post by Randall strickland
Sat May 21, 2022 1:56 pm
1926-1927 Factory Ford Shocks F/S

Last post by Layden Butler « Sat May 21, 2022 1:54 pm
Posted in Classifieds - Parts

by Layden Butler » Sat May 21, 2022 1:54 pm » in Classifieds - Parts

Few people even know that Ford offered shock absorbers as a factory accessory, here is a set! $300, domestic shipping $15.

0 Replies

82 Views

Last post by Layden Butler
Sat May 21, 2022 1:54 pm
Right hand drive Hogs Head with lower steering bracket

Last post by J1MGOLDEN « Sat May 21, 2022 1:11 pm
Posted in Classifieds - Parts
Replies: 5
by BlackTinLizzie » Tue May 18, 2021 12:40 pm » in Classifieds - Parts

First post

Right hand Hogs Head for starter car with lower steering bracket.
400.00 plus shipping 20210516_062218_compress81.jpg 20210516_062232_compress80.jpg 20210516_062206_compress44.jpg

Last post

There is a circle behind the Magneto Post with two numbers and a letter in it that tells you what year the RHD cover was made.

5 Replies

942 Views

Last post by J1MGOLDEN
Sat May 21, 2022 1:11 pm
Diagnosing a Starting Problem

Last post by TXGOAT2 « Sat May 21, 2022 1:08 pm
Posted in General Discussion Forum (started 2019)
Replies: 11
by DaveBarker » Fri May 20, 2022 10:31 am » in General Discussion Forum (started 2019)

First post

So, after a few years in storage, I've been working on getting my 1919 Speedster running.

A few items to bear in mind:
- Rajo overhead Model 30
- Hand crank only
- Texas T distributor with new Champion A-25 plugs
- Carter fuel pump with Holley regulator set at 1.5 lbs pressure; flow test was good
- Stromberg RF carb, no leaks
- half a tank of...

Last post

In my experience, there is never one perfect setting.

11 Replies

299 Views

Last post by TXGOAT2
Sat May 21, 2022 1:08 pm
Is this the correct differential case for a 1927 Touring

Last post by John kuehn « Sat May 21, 2022 12:23 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by bmklawt » Sat May 21, 2022 6:50 am » in General Discussion Forum (started 2019)

First post

Is this the correct differential case I need for my 1927 Touring

Last post

To much for the asking price. You really don’t know about the spider gears without looking at them. Probably can find a better one for around $50-$75.

7 Replies

253 Views

Last post by John kuehn
Sat May 21, 2022 12:23 pm
Sold/Oval Gas Tank Brackets

Last post by RandyB « Sat May 21, 2022 10:34 am
Posted in Classifieds - Parts
Replies: 2
by RandyB » Wed Apr 20, 2022 12:45 pm » in Classifieds - Parts

First post

Oval gas tank brackets for sale, 3 pieces. $15.00 + $16.10 USPS flat rate shipping

Last post

Tank brackets are sold.

2 Replies

196 Views

Last post by RandyB
Sat May 21, 2022 10:34 am
Mrs Becker’s passing

Last post by DLodge « Sat May 21, 2022 9:51 am
Posted in General Discussion Forum (started 2019)
Replies: 5
by Dropacent » Fri May 20, 2022 6:03 pm » in General Discussion Forum (started 2019)

First post

For many decades , Larry and Bonnie Becker supplied model T enthusiasts with alternators for the model Ts and other old auto electrical parts. Perhaps you remember , Bonnie never went to a swap meet without her Pet Pink Pig, made from model t parts. She has gone to her reward, joining Larry in that big ford dealership in the sky!

Last post

... Larry & my father were stationed at the same SAC base in Nebraska.

Offutt? I was at Little Rock.

Condolences to the family.

sac_shield.jpg

5 Replies

488 Views

Last post by DLodge
Sat May 21, 2022 9:51 am
I guess there’s a tire shortage now

Last post by Steve Jelf « Sat May 21, 2022 9:27 am
Posted in General Discussion Forum (started 2019)
Replies: 12
by Don ellis » Tue May 17, 2022 9:04 pm » in General Discussion Forum (started 2019)

First post

I hear there’s plenty but there stuck on a ship. Has anyone ran Olympics before? How did they do?

Last post

Aren't the Bloxley metal stems the same size as the original Schraders?
I've only seen a picture, but I expect they're the same size as all the other metal stems currently sold. That's the Schrader 724/725 width. Original Model T stems are the narrower 777/888 size. I use the wide ones because they fit the dust covers I happen to have.

12 Replies

951 Views

Last post by Steve Jelf
Sat May 21, 2022 9:27 am
Stevens Tapered Reamers???

Last post by nigel_hugo « Sat May 21, 2022 9:18 am
Posted in Classifieds - Parts
Replies: 24
by Dan Hatch » Mon May 02, 2022 6:33 pm » in Classifieds - Parts

First post

I have been getting a number of inquiries for my Stevens Tapered Upper Reamers. I am considering another run. Due to increased cost the price is going to be in neighborhood of $250.00 + shipping.
I will need at least 7 orders for this to happen.
Email me at address in pictures to reply.
If I get enough interest I will look into another run of...

Last post

Dan, I am in for the tapered reamer, the drill and tap for the bottom hole.
Thanks, Nigel Hugo.

24 Replies

953 Views

Last post by nigel_hugo
Sat May 21, 2022 9:18 am
WTB a TT

Last post by tom_strickling « Sat May 21, 2022 7:32 am
Posted in Classifieds - Vehicles
Replies: 1
by TheSaintDiscJockey » Mon May 09, 2022 2:08 pm » in Classifieds - Vehicles

First post

Testing the waters to see if there are any TTs coming up for sale.
Prefer the C-Cabs, but keeping an open mind. A pm is fine, or email @ brooks saint ives at aol dot com (all one word).
Or call 609 920 4220. Many thanks.

Brooks

Last post

Keep a real open mind and build your own wood bodied .

1 Replies

351 Views

Last post by tom_strickling
Sat May 21, 2022 7:32 am
Can of worms officially opened

Last post by Duey_C « Sat May 21, 2022 2:14 am
Posted in General Discussion Forum (started 2019)
Replies: 48
by Jonah D'Avella » Mon May 16, 2022 9:25 am » in General Discussion Forum (started 2019)

First post

What have your experiences with marvel's mystery oil been?

Last post

I had said: ATF has little lubricating properties according to some anymore.
Jerry and John replied:
So, to those some , I would ask what then is lubricating our automatic transmissions? :)
Sssh! Please don't tell the 163,000 mile automatic transmission in my Dodge that it has been running on a fluid with little lubricating properties.

Me:...

48 Replies

1518 Views

Last post by Duey_C
Sat May 21, 2022 2:14 am
WTB 26/27 roadster body

Last post by Kevin Pharis « Sat May 21, 2022 12:45 am
Posted in Classifieds - Parts
Replies: 19
by ModelTGal » Sun Apr 24, 2022 6:50 pm » in Classifieds - Parts

First post

Finally finished most of the running gear and directed my focus to my roadster body - only to discover a former owner had pop-riveted patch panels along the entire length of both side of the body (firewall to back of bucket) to cover up rusted out panels and (unfortunately) a significant amount of the subframe is also rusted out or paper thin…...

Last post

That’s the one! I can’t tell you how many hours of panel beating and fitting I have into that car. An original califunny car with only cosmetic rust in the trunk and below seat area (as seen in the pics). My goal for that car was to have an “original” car with no serious issues or noticeable repairs. You would have had an excellent start...

19 Replies

1207 Views

Last post by Kevin Pharis
Sat May 21, 2022 12:45 am
Windshield glass

Last post by Craig Leach « Fri May 20, 2022 11:26 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Craig Leach » Thu May 19, 2022 2:45 pm » in General Discussion Forum (started 2019)

First post

Wayne is having trouble finding anyone that will cut & install early ford windshields for his 12 & 14 T's. Everyone he has been sent to is either out of business or no longer provides the service for flat glass. Does anyone know of someone in the Austin Texas area that will do these.
Thanks.
Craig.

Last post

Thanks guys will check them out.
Craig.

6 Replies

371 Views

Last post by Craig Leach
Fri May 20, 2022 11:26 pm
Starting crank bushing in front of pan removal

Last post by Craig Leach « Fri May 20, 2022 11:20 pm
Posted in General Discussion Forum (started 2019)
Replies: 15
by Craig E. Luton » Thu May 19, 2022 7:24 pm » in General Discussion Forum (started 2019)

First post

I need to replace the bushing at the front of the oil pan that the starting crank goes through. What is the best and easiest way to remove the old bushing? The bushing is probably frozen into the pan.
Thank you in advance, Craig

Last post

John I have two of the harbor freight air saws but it is a PITA to get a hack saw blade to fit and they don't do very well usually I use saber saw blades if I need a longer blade. And yes some people don't like HB you have to be careful what you buy from them. I have purchased tools from them starting in 1977 contrary to popular belief they are a...

15 Replies

455 Views

Last post by Craig Leach
Fri May 20, 2022 11:20 pm
Firewall Templates

Last post by Steve Jelf « Fri May 20, 2022 11:19 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Apis Mellifera » Fri May 20, 2022 7:05 pm » in General Discussion Forum (started 2019)

First post

Since I have been unable to find a low cowl firewall in steel, is there somewhere I might find a pattern or template to make one out of plywood?

Last post

A little more on what Wayne said about the single year low steel firewall. The 1923 models came out in August 1922 with wood firewalls. The steel firewall didn't arrive until January 1923. Both wood and steel were used until March or April, then steel only. The instant identifying mark on a 1923 steel (low) firewall is the large wiring hole under...

6 Replies

191 Views

Last post by Steve Jelf
Fri May 20, 2022 11:19 pm
body work

Last post by Scott_Conger « Fri May 20, 2022 10:41 pm
Posted in General Discussion Forum (started 2019)
Replies: 9
by andy2794 » Fri May 20, 2022 8:01 am » in General Discussion Forum (started 2019)

First post

I am ready to start the body work on my 1916 Touring, there is a lot of surface rust on the inside and out. I would like to remove this support for the back seat so I can get at the rust better. Does it come out? Know of any videos?

Last post

Ospho and scotch-brite pads after the wood is out. Several go-rounds and every pit will be clean down to the parent metal. Used according to the label and the metal will remain rust-free for months in humid Florida, or years in dry environment like Wyoming. I've done it in both places and now, years later are still very pleased with how it holds...

9 Replies

439 Views

Last post by Scott_Conger
Fri May 20, 2022 10:41 pm
1926 coupe interior wood vs all steel

Last post by varmint « Fri May 20, 2022 10:20 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by jiminbartow » Tue Mar 29, 2022 12:35 pm » in General Discussion Forum (started 2019)

First post

Since joining mtfca, I have seen many questions regarding wood around the interior windows of the 1926-‘27 coupe. In all that time I never responded to the question because, in the 52 years since I last saw under the upholstery, I forgot whether I had wood or not even though I do not recall ever installing wood in the interior of my 1926 coupe....

Last post

Our October 1926 coupe has wood around the windows.
I have noticed for a long time from many interior photos of gutted coupes that early cars had steel.
If you do not have the frame serial number then the best way to date a coupe body is the wood battery cover.
Typically, with photos, there is no serial number.

12 Replies

624 Views

Last post by varmint
Fri May 20, 2022 10:20 pm
SOLD—-(Price Reduction). FS—Dust covers/nuts bridge washers.

Last post by Runabout « Fri May 20, 2022 10:08 pm
Posted in Classifieds - Parts
Replies: 5
by Runabout » Sat May 07, 2022 4:50 pm » in Classifieds - Parts

First post

$75.00 for the lot plus shipping. (Will separate if needed)
For sale dust covers full set of nickel rubber stems, brass valve stem nuts, bridge washers, hood hooks… what you see is what you get.
All plus shipping. Contact 423-two84-97fifty (Don’t like my price make an offer)
1563E9F0-1666-40E7-9E71-8186640620F4.jpeg

Last post

Still pending payment on the sale, Eric please follow up on your end, the payment may have gotten lost in the mail..? Email sent as well .
Thanks in advance.
Steve

5 Replies

600 Views

Last post by Runabout
Fri May 20, 2022 10:08 pm
RS late style wishbone

Last post by KimDobbins « Fri May 20, 2022 9:04 pm
Posted in Classifieds - Parts
Replies: 4
by KimDobbins » Thu May 19, 2022 2:25 pm » in Classifieds - Parts

First post

I have 6 nice late style wishbones. All have very slight wear on the ball. $25.00 each plus shipping. Kdmks AT att.net.

Last post

All the wishbones are sold.

4 Replies

357 Views

Last post by KimDobbins
Fri May 20, 2022 9:04 pm
1909-1910 Hogshead narrow size 5th type for sale

Last post by JTT3 « Fri May 20, 2022 8:59 pm
Posted in Classifieds - Parts
Replies: 1
by JTT3 » Thu May 19, 2022 3:48 pm » in Classifieds - Parts

First post

This is a narrow style transmission cover (5th style)
For very late 1909 & 1910. The cover is in good shape no cracks in the perimeter mounting bosses, the pedals are crisp & pedal holes have been sleeved plus the Clutch pedal boss has been reinforced. Really a nice addition. $1650.00 plus the ride to your location. I bought this for a 1910...

Last post

Bump to the top

1 Replies

346 Views

Last post by JTT3
Fri May 20, 2022 8:59 pm
Trying to get finished.

Last post by Rich Eagle « Fri May 20, 2022 8:43 pm
Posted in General Discussion Forum (started 2019)
Replies: 64
by Dollisdad » Fri Apr 15, 2022 10:03 pm » in General Discussion Forum (started 2019)

First post

Came to Calif. to finish paint work on two cars. One is very close to done and the other is in the tear down stage from fit up. When I built the touring I wanted to paint it red, so I bought the paint, thinner and hardner at that time. 20yrs ago. Paint is all still good, but I decided I wanted a Green car. So I priced materials and decided maybe...

Last post

I am so enjoying watching all of this without having to do any of the work.
Thanks so much.
Rich

64 Replies

4323 Views

Last post by Rich Eagle
Fri May 20, 2022 8:43 pm
Rear Wheel Fitting

Last post by Alan Long « Fri May 20, 2022 8:26 pm
Posted in General Discussion Forum (started 2019)
Replies: 4
by GeorgeHounslow » Fri May 20, 2022 4:54 pm » in General Discussion Forum (started 2019)

First post

Hi All,

I have just replaced one of the rear axle seals on my 1916 Tourer, and have refitted the wheel. However, despite having it on and off a few times and rechecking the fitment of the keyway, there is about an 1/8 difference as opposed to the other side, and I can see the edge of the brake shoes on the side I have removed.

Obviously I have...

Last post

I too had this issue on my Model T (non Ruckstell axle and Floating Hubs) after a full overhaul using a replacement RHS housing.

Although Being very confident that everything was 100% internally and housings weren’t bent I did as mentioned above to
try without the Key and then swap wheel / brake drum left to right. The issue went with the wheel....

4 Replies

216 Views

Last post by Alan Long
Fri May 20, 2022 8:26 pm
Transmission noise that seems odd to my ears

Last post by John kuehn « Fri May 20, 2022 8:13 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Mark Nunn » Fri May 20, 2022 2:25 pm » in General Discussion Forum (started 2019)

First post

I have had my Model T for four years and driven it, maybe, 100 miles. It is still a work in progress. I heard a noise today that I needed to ask about. I should mention that I lost much of my hearing a few years before getting the Model T. High frequencies elude me. The noise may have always been there.

I was in my barn tuning the newly cleaned...

Last post

Any past history about the car? Was the engine rebuilt or restored? Sometimes using good used transmission parts to rebuild a T transmission can make it have a different sound. I know because I’ve done that.
I installed a good used low speed drum to replaced the cracked one and it was a whiner for sure. I then pulled the engine and found another...

5 Replies

254 Views

Last post by John kuehn
Fri May 20, 2022 8:13 pm
Upholstery

Last post by John kuehn « Fri May 20, 2022 7:58 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by johnernst » Fri May 20, 2022 1:00 pm » in General Discussion Forum (started 2019)

First post

I am wondering if someone can be of help on this

I have a 1922 Canadian Touring. Before I start the upholstery do I need to add the wood trim around the top edge of the seats. It already has the plastic trim installed as per my pics but Im not sure if I need to build or buy the wood rails and attach them. IMG_5100.jpeg IMG_5101.jpeg

I checked...

Last post

John
At the time I put my 21 together Snyder’s had the exact carriage style seat trim bolt kits. The ones that were on the remains of the 21 body were pretty much rusted through. The repos were very nice. Hope this helps.

6 Replies

240 Views

Last post by John kuehn
Fri May 20, 2022 7:58 pm
WTB floorboard risers for a 1923 touring

Last post by Don ellis « Fri May 20, 2022 6:58 pm
Posted in Classifieds - Parts

by Don ellis » Fri May 20, 2022 6:58 pm » in Classifieds - Parts

Need a set for a low cowl 23, should be the metal style.
Thanks

0 Replies

75 Views

Last post by Don ellis
Fri May 20, 2022 6:58 pm
Repair of a Stewart & Clark clock

Last post by Dropacent « Fri May 20, 2022 6:19 pm
Posted in General Discussion Forum (started 2019)
Replies: 10
by RGould1910 » Thu May 19, 2022 11:27 pm » in General Discussion Forum (started 2019)

First post

I have a Stewart & Clark rim wind eight day clock on my 1910 that stopped running a few years ago. Is there anyone I can trust to service/ repair it?
20220519_202745.jpg

Last post

It’s not at all complicated , Richard. If I can , ANYBODY can. Now if you tend to start wrenching when you get inside things, that’s another issue. My bigger issue. from past experience is sending things off and never seeing them again. Most small clock repair people aren’t spring chickens.

10 Replies

349 Views

Last post by Dropacent
Fri May 20, 2022 6:19 pm
Stromberg OF carb steel parts for sale.

Last post by Dropacent « Fri May 20, 2022 5:54 pm
Posted in Classifieds - Parts
Replies: 4
by Dropacent » Tue Jan 11, 2022 2:59 pm » in Classifieds - Parts

First post

This set of 5 steel parts for the accessory Stromberg carb are $155 ppd. I had hoped they would be a continuing job, but like so much of these parts , I know they be a one shot deal. Email Tmorsher@icloud.com , it is the only way to reach me. No PMs, no emails through this site, no requests to call you, as I don’t do phones.
We still have some...

Last post

I think I have 4 sets remaining. Tmorsher@icloud.com to reach me. Thanks!

4 Replies

696 Views

Last post by Dropacent
Fri May 20, 2022 5:54 pm
WTB: Timing Advance Linkage for Bosch Mag

Last post by Dropacent « Fri May 20, 2022 5:13 pm
Posted in Classifieds - Parts
Replies: 8
by Guardian1fox2 » Fri May 20, 2022 11:23 am » in Classifieds - Parts

First post

Looking for a way to adjust timing on the side drive magneto. Found a couple pics of the original piece. It would be neat to find one like this that uses the original spark control rod:

239EC0E5-4D27-4D85-9824-BAB11D3BA78A.jpeg 98584638-5C7F-4C12-B1FD-A206F49C94F6.jpeg

Last post

I have an old friend who has told me for years, don’t overthink it, it’s just a T

8 Replies

149 Views

Last post by Dropacent
Fri May 20, 2022 5:13 pm
1925 Tudor for sale. $5,500.

Last post by Guardian1fox2 « Fri May 20, 2022 4:22 pm
Posted in Classifieds - Vehicles
Replies: 2
by Adam » Mon May 16, 2022 4:25 pm » in Classifieds - Vehicles

First post

Priced for a quick sale. I need the space. First $5,500 gets it. Runs and drives. Good title. Body has no rust out or repairs. Wood is good. Contact me via email. I do not receive pm’s from this forum. I might bring it to the Belvedere, IL Model T club swap meet this Saturday if it doesn’t sell before then. Car is in Oconomowoc, WI....

Last post

Man I wish this was closer I could pull that off I think

2 Replies

901 Views

Last post by Guardian1fox2
Fri May 20, 2022 4:22 pm
DU4 magneto question

Last post by Guardian1fox2 « Fri May 20, 2022 4:21 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Guardian1fox2 » Fri May 20, 2022 8:21 am » in General Discussion Forum (started 2019)

First post

Currently disassembling the Bosch DU4 magneto and came up with some questions.

The instructions all over the internet don’t include this info it seems; but when reassembling, how do you align the gears? I notice there’s an A and C which I assume is clockwise and anti clockwise, and there’s an A and C on the interrupter housing. I’m guessing when...

Last post

Indeed, I think I can make something relatively easy after looking at a lot of pictures with some bolt on parts! First thing is to get the mag working well lol.

5 Replies

225 Views

Last post by Guardian1fox2
Fri May 20, 2022 4:21 pm
This was trucking-Old Photos

Last post by Dan Haynes « Fri May 20, 2022 3:57 pm
Posted in OT - Off topic
Replies: 1008
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

7

8

9

10

11
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

Dennis & Richard -

I had no idea modern gas cylinders, as we are familiar with them, are over 100 years old! I guess after seeing enough old industrial carbide generators I assumed cylinders were WWII era.
1008 Replies

197316 Views

Last post by Dan Haynes
Fri May 20, 2022 3:57 pm
Trailer parking area for homecoming

Last post by Farmer J « Fri May 20, 2022 3:34 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by tom_strickling » Fri May 20, 2022 11:10 am » in General Discussion Forum (started 2019)

First post

Can anyone tell me where the trailer parking area for homecoming is ??

Last post

Tom, I believe it’s the same place that has been for the last several years. If you still have questions please call the Museum or our business office they will get you the right answers.

1 Replies

166 Views

Last post by Farmer J
Fri May 20, 2022 3:34 pm
Wanted Original 26-27 Sun Visor Corners

Last post by pron022020 « Fri May 20, 2022 3:22 pm
Posted in Classifieds - Parts
Replies: 1
by pron022020 » Mon May 16, 2022 5:56 am » in Classifieds - Parts

First post

Looking for a set of original sun visor corners for a 27 coupe.

Last post

Back to the top.

1 Replies

136 Views

Last post by pron022020
Fri May 20, 2022 3:22 pm
Pleasant surprise yesterday

Last post by DanTreace « Fri May 20, 2022 2:43 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by KMcoldcars » Fri May 20, 2022 2:36 pm » in General Discussion Forum (started 2019)

First post

Yesterday we pulled the rear end from my 1916 coupelet that I bought one year ago. The car was restored in the 1970s or 1980s and I wanted to check to see if the thrust washers were babbit or bronze. It turns out they were bronze, the outer grease seals were the modern neoprene type, and it looked as if all was well with the rearend. I will be...

Last post

Keith

You may pass forward your 'pleasant surprise' if you make a little tag or plate and bolt to the rear axle housing, let a future owner know that news. I do.

IMG_2597.JPG

1 Replies

304 Views

Last post by DanTreace
Fri May 20, 2022 2:43 pm
Spur strap to hold down touring top

Last post by CudaMan « Fri May 20, 2022 2:11 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by mbowen » Fri May 20, 2022 12:58 pm » in General Discussion Forum (started 2019)

First post

I wonder if Henry used spur straps to hold down touring tops back in the day? Both of the straps on my ‘24 were rotten when I got it, and broke on the first pull. I made some straps out of an old belt of mine, but the leather was too thick. After a fair amount of looking online I found these 19-inch Weaver English spur straps that are a perfect...

Last post

Lots of discussion about top straps in this thread:

1 Replies

132 Views

Last post by CudaMan
Fri May 20, 2022 2:11 pm
nys t tour

Last post by Art M « Fri May 20, 2022 1:18 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Chuck Stevens » Thu May 19, 2022 7:15 am » in General Discussion Forum (started 2019)

First post

Is anyone interested in organizing a model t tour in upstate new York ? We have lots of back roads and beautiful scenery, and ice cream!!

Last post

I rode my bicycle 100 miles in the Catskills in one day 51 years and 30 pounds ago. Very nice country but some tough hills to climb.
It would make nice place to hold a tour.

Art Mirtes

6 Replies

339 Views

Last post by Art M
Fri May 20, 2022 1:18 pm
Shoutout to Snyders! Carb getting rebuilt instead.

Last post by Scott_Conger « Fri May 20, 2022 12:25 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Guardian1fox2 » Fri May 20, 2022 10:41 am » in General Discussion Forum (started 2019)

First post

Got a call from Snyders this morning. They told me the carb I had sent them as a core for an NH, while looks like an NH, was actually a Wizard Improved Carburetor. Sent me 2 pages to my phone of documentation for me to look at which I’ll include here.

He said that the wizard was a straight through bore design and even had a small heating element...

Last post

It's a flapper-style carb...it should start like a Kingston L-4 with no choke unless very cold, and then pretty much run like an NH.

Folks call them straight-through because there is no dip in the casting, but that straight-through bore is covered over by a flapper which acts like a variable venturi. Some folks love them, some are pretty much meh...

5 Replies

290 Views

Last post by Scott_Conger
Fri May 20, 2022 12:25 pm
Corcoran victor sidelights / taillight fs

Last post by CTLeonard « Fri May 20, 2022 12:22 pm
Posted in Classifieds - Parts
Replies: 2
by CTLeonard » Tue May 03, 2022 10:32 am » in Classifieds - Parts

First post

Good set of lights fs. One of the bulbs is in need of some welding if you intend to burn. 225.00 for all three plus shipping IMG_20220503_092128188.jpg IMG_20220503_092044948.jpg IMG_20220503_092000049.jpg IMG_20220503_091917229.jpg IMG_20220503_091857553.jpg

Last post

How about 175.00 plus shipping

2 Replies

415 Views

Last post by CTLeonard
Fri May 20, 2022 12:22 pm
Wanted to Buy, 1917 Coupelet or 1918 Coupe ONLY!!!

Last post by Novice « Fri May 20, 2022 11:58 am
Posted in Classifieds - Vehicles
Replies: 18
by Walt Wise » Thu May 05, 2022 2:41 pm » in Classifieds - Vehicles

First post

I am searching to buy a 1917 Coupelet(two of the three models that year, but preferably the rounded back soft cornered roof, one is pictured below, or either the traditional flat roof, also a pic below, just like the 1918) or a 1918 Coupe. All three of these models in those two years have the removable pillars(removable door posts as some say). I...

Last post

Walt. Lure is good. Your just fishing in the wrong pond! Put ads in MTFCA and MTFCI publications. Vintage Ford and Model T times. Hemmings. face Book model Ts. Antique Automobile Association and a few others that come to mind. Yes! Your are looking for a rust free needle in a wet hay stack. In the mean time. if You don't own a model t. get one....

18 Replies

1593 Views

Last post by Novice
Fri May 20, 2022 11:58 am
26 touring, putting the top up

Last post by John Codman « Fri May 20, 2022 11:42 am
Posted in General Discussion Forum (started 2019)
Replies: 9
by Dave1 » Thu May 19, 2022 7:08 pm » in General Discussion Forum (started 2019)

First post

Today was the first time putting the top up on the 26 Touring.
I was able to get the top up but it doesn’t look right to me.
The side brackets are hanging down below the bottom edge of the fabric. Plus the edges of the fabric seem to be loose?
I’m hopping the attached pictures will explain better .

Dave

Last post

The top in the OP looks exactly like my '27. If the side bars were to move up, the brackets where the front of the top fit the windshield posts would bind and the back of the pivoting side bars would have to move downward. I think that the position of the bars is correct. I am not going to attempt to change the position on my 27.

9 Replies

291 Views

Last post by John Codman
Fri May 20, 2022 11:42 am
WTB: early auto camp items

Last post by Linus Tremaine « Fri May 20, 2022 11:34 am
Posted in Classifieds - Parts
Replies: 43
by Linus Tremaine » Wed Feb 27, 2019 12:52 pm » in Classifieds - Parts

First post

Hi all,
Im still hunting for early auto camp items. I collect civilian auto camp specific things such as coolers, kitchens, folding canvas items, shovels etc.

thanks for looking

Last post

That is also a kampkook yes but this previous one was an 1896 patented kamp kook kit which was a large tin box with a cook grill around it and contained a full cook set inside.

Stoves are easier to find and I have a few but thank you very much for looking our for one for me.

43 Replies

9291 Views

Last post by Linus Tremaine
Fri May 20, 2022 11:34 am
RUCKSTELL & MISC T

Last post by Guardian1fox2 « Fri May 20, 2022 10:52 am
Posted in Classifieds - Parts
Replies: 7
by Chaffins » Sat Apr 30, 2022 1:30 pm » in Classifieds - Parts

First post

1926-27 RUCKSTELL CUSTOMER HAD US REBUILD IT THEN NEVER PICKED IT UP. . RUCKSTELL $1,200.00, REBUILD $ 2755.61 3/1 GEARS,
TOTAL $3,955.61
DU4 MAGNITO AND MOUNTING BRACKET $450.00, 2 WARFORD CASES, GOOD $50.00 EA. CUSTOMER PAYS SHIPPING GLEN

Last post

Do y’all have the linkage for the timing advance for the DU4?

7 Replies

1357 Views

Last post by Guardian1fox2
Fri May 20, 2022 10:52 am
valve job noise

Last post by DonH « Fri May 20, 2022 10:17 am
Posted in General Discussion Forum (started 2019)
Replies: 12
by DonH » Wed May 18, 2022 9:24 pm » in General Discussion Forum (started 2019)

First post

just had a valve job done by a well respected mechanic on my 1917 engine. Crank is in car and complete valve train but I have not yet installed the pistons. When engine is turned over valve train is making a clicking sound. Mechanic suggests running engine and maybe it will go away. That does not appeal to me. Any suggestions appreciated. All new...

Last post

Thank you all for your comments suggestions. Now I will do some serious work at looking for the solution. Don

12 Replies

484 Views

Last post by DonH
Fri May 20, 2022 10:17 am
Driveshaft confusion, 1927 Touring

Last post by RGould1910 « Fri May 20, 2022 9:40 am
Posted in General Discussion Forum (started 2019)
Replies: 7
by bmklawt » Thu May 19, 2022 5:17 pm » in General Discussion Forum (started 2019)

First post

Getting into rebuilding the rear axle on my 1927 Touring, took the drive shaft apart and there is a modern bearing in the spool, not sure what the part is called, and no roller bearing, whats going on there.
I need new everything, drive shaft, roller bearing, spool, pinon gear, the only thing that looks good is the thrust bearing, what is a good...

Last post

I feel your pain. I bought a beautifully restored car from an estate. Although it hadn't run in a while, I was assured it would run with little effort. I figured anyone who would go to the expense of doing such a nice cosmetic restoration would surely have done the same mechanically. Boy, was I wrong! It was nothing but a headache and in spite of...

7 Replies

328 Views

Last post by RGould1910
Fri May 20, 2022 9:40 am
FS Unrestored Time-capsule

Last post by TXGOAT2 « Fri May 20, 2022 9:23 am
Posted in Classifieds - Vehicles
Replies: 20
by Tadpole » Fri Apr 01, 2022 9:27 am » in Classifieds - Vehicles

First post

Need gone, 1912 Model T Deluxe Sport Phaeton Convertible. RARE body style, matching numbers, low miles, original paint/upholstery. BARNFIND.
In unrestored condition, needs some TLC, last driven 4 months ago in a Christmas Parade. Make an offer, no low-ballers, I know what I've got.

Last post

Must sell!! LOST STORAGE SPACE!

20 Replies

3686 Views

Last post by TXGOAT2
Fri May 20, 2022 9:23 am
Cast iron muffler end fs

Last post by CTLeonard « Fri May 20, 2022 8:56 am
Posted in Classifieds - Parts

by CTLeonard » Fri May 20, 2022 8:56 am » in Classifieds - Parts

This is a what is it sale. Haven't seen one and it's a pretty small outlet. Make me an offer on this fine wallhanger IMG_20220520_074244029.jpg IMG_20220520_074250259.jpg IMG_20220520_074308436.jpg

0 Replies

114 Views

Last post by CTLeonard
Fri May 20, 2022 8:56 am
screwdriver for sale

Last post by G.ARMS86 « Fri May 20, 2022 8:35 am
Posted in Classifieds - Parts
Replies: 1
by Allan » Sun May 15, 2022 2:52 am » in Classifieds - Parts

First post

I found another original square shaft screwdriver to make another early T screwdriver. Same new handle to the original Ford drawing. $91 posted to your door. 20220515_160400.jpg

Allan from down under.

Last post

Is this still available?

1 Replies

504 Views

Last post by G.ARMS86
Fri May 20, 2022 8:35 am
FJ - Some Humor To Brighten Your Day

Last post by perry kete « Fri May 20, 2022 8:18 am
Posted in OT - Off topic
Replies: 1389
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

10

11

12

13

14
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

AAWEfYR.jpg
1389 Replies

264862 Views

Last post by perry kete
Fri May 20, 2022 8:18 am
Tractor Talk

Last post by Bryant « Fri May 20, 2022 8:12 am
Posted in OT - Off topic
Replies: 45
by Bryant » Thu May 05, 2022 7:13 pm » in OT - Off topic

First post

I love them, do you? Here’s a place for discussion 0CAE2DFA-8698-4677-AA09-9C3DF018D429.jpeg Here is my 1944 Ford/Ferguson model 2N. I play with it every opportunity I get! Let’s see Um if you got Um!

Last post

0617141508.jpg Todays tractor is this 1954 John Deere R. Fresh from the paint shop! Another 2cyl Diesel with a pony motor, this one a horizontally apposed 2cyl. sounds like a weed eater running until you let that compression lever go! another fun tractor to putt putt around on ;)

45 Replies

1211 Views

Last post by Bryant
Fri May 20, 2022 8:12 am
Roller timer fs

Last post by Wayne Sheldon « Fri May 20, 2022 6:56 am
Posted in Classifieds - Parts
Replies: 5
by CTLeonard » Thu May 19, 2022 4:01 pm » in Classifieds - Parts

First post

Pulled off an engine and cleaned up. Looks like it will operate nicely. 35.00 plus shipping IMG_20220519_145544574.jpg IMG_20220519_145533672.jpg IMG_20220519_145522146.jpg IMG_20220519_145458010.jpg

Last post

I have one identical to this. I think it is one of Milwaukee's designs? But not absolutely certain. Check carefully to see if the roller is offset compared to standard Ford or Tiger timers. It was a long time ago, but I once had a model T that off and on ran terribly, even though EVERYTHING checked out good. Or so I thought. One day I was looking...

5 Replies

258 Views

Last post by Wayne Sheldon
Fri May 20, 2022 6:56 am
PerspecTive phoTo

Last post by kelly mt « Fri May 20, 2022 12:37 am
Posted in General Discussion Forum (started 2019)
Replies: 73
by Bryant » Tue Feb 22, 2022 6:37 am » in General Discussion Forum (started 2019)

First post

The model T. How do you see it? 46A57EE6-DF6F-4561-A777-C57F8C57F66B.jpeg

Last post

The old dropped screw trick.

Bolt Rescue 2.jpg

73 Replies

5033 Views

Last post by kelly mt
Fri May 20, 2022 12:37 am
Model R Odyssey

Last post by Kevin Pharis « Fri May 20, 2022 12:10 am
Posted in OT - Off topic
Replies: 9
by Robert Kiefaber » Thu May 19, 2022 6:51 pm » in OT - Off topic

First post

B43DD43B-EDC9-4C29-94C8-1461385A5E12.jpeg Trying to get this model R running. I’ve had it for about 4 years now and have done the following:

- Had the original radiator re-cored with a new Brassworks
core.
- rebuilt coils by (RIP) Rv Anderson.
- Have original carb and new rebuilt Holley nh
- commutator cleaned and new wiring.
- pulled the jugs...

Last post

Kevin, that is very interesting. Would I need longer springs?

New springs of the correct length, maybe. But only if the originals are noticeably bent or have lost tension. Bent springs can cause valves to react slowly, and weak springs cause poor sealing. Either can make a good motor run bad. A motor with good sealing valves will start quickly...

9 Replies

173 Views

Last post by Kevin Pharis
Fri May 20, 2022 12:10 am
Height Question

Last post by noelchico « Thu May 19, 2022 10:32 pm
Posted in General Discussion Forum (started 2019)
Replies: 3
by Reno Speedster » Wed May 18, 2022 9:45 pm » in General Discussion Forum (started 2019)

First post

I am making arrangements to get my 22 pickup shipped up to Alaska. I need to confirm the drop off tomorrow. But today the shipper told me that the height limit for a vehicle to be shipped in an enclosed container is 6 feet. The measurements I see on line say that the T is 73.2 in tall so based on that, I can fold down the top and windshield and It...

Last post

Just checked. My '23 Touring with '26 wire wheels hits 70.5 inches to the top of the windshield posts. My '20 Roadster with the folding windshield is 67 inches top down, windshield folded. You should be fine

3 Replies

260 Views

Last post by noelchico
Thu May 19, 2022 10:32 pm
2 1910s for sale?

Last post by Scott_Conger « Thu May 19, 2022 10:23 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by ThreePedalTapDancer » Thu May 19, 2022 8:20 am » in General Discussion Forum (started 2019)

First post

I saw this on tbay, trying to sell whole lot, but maybe they want to sell cars separately, but there’s two 1910 projects for sale. Who knows it might be worth following up on if you are near Mississippi.

0B8F02AD-2842-468F-9B8D-7912EC80DCD3.jpeg 6FBB498B-FEFE-4669-8140-7EC54B55948B.jpeg 8E024BE9-28D0-4D94-9348-C2DDB08A68DF.jpeg

Last post

that price buys every car in the barn plus parts, and I'd bet there are a dozen or so from scanning things. May still not be a great deal, but it is not completely out of reason (just mostly)

7 Replies

783 Views

Last post by Scott_Conger
Thu May 19, 2022 10:23 pm
Non generator timing cover fs

Last post by Allan « Thu May 19, 2022 9:21 pm
Posted in Classifieds - Parts
Replies: 1
by CTLeonard » Thu May 19, 2022 3:01 pm » in Classifieds - Parts

First post

Nice and clean ready to install. 50.00 plus shipping IMG_20220519_135716915.jpg IMG_20220519_135653705.jpg IMG_20220519_135641778.jpg IMG_20220519_135634067.jpg

Last post

That's the good one which will take the A model big fat white crankshaft seal.

Allan from down under.

1 Replies

186 Views

Last post by Allan
Thu May 19, 2022 9:21 pm
11-12 carb adjustment rod fs. Sold

Last post by Allan « Thu May 19, 2022 9:13 pm
Posted in Classifieds - Parts
Replies: 5
by CTLeonard » Wed May 18, 2022 11:54 am » in Classifieds - Parts

First post

Adjusting rod with brass knob and brass two hole bezel. 19 long. Could use a little more polishing to be brilliant. 75.00 plus shipping IMG_20220518_104612080.jpg IMG_20220518_104601361.jpg IMG_20220518_104639102.jpg

Last post

The devil is in the detail. I suspect it is a reproduction. The fork piece is welded to the shaft. The original rods are forged and the fork is part of that forging. The 1913 one listed separately shows the forged end of the fork.
I could be wrong.

Allan from down under.

5 Replies

320 Views

Last post by Allan
Thu May 19, 2022 9:13 pm
Thoughts on using Seafoam

Last post by Tmooreheadf « Thu May 19, 2022 9:12 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by 1925 Touring » Mon May 16, 2022 6:29 pm » in General Discussion Forum (started 2019)

First post

Does anyone use Seafoam in their T or TT? We use it in our 1925 Touring and 1923 TT Firetruck. What do you all think of Seafoam for a T? We use it on each tank.

Last post

I’ve used sea foam in modern cars religiously. Get over 300,000 miles on all cars with never a valve or injector issue. I do it every oil change and those oil changes are geared to what the dash board says, not a standard mileage reading. Some oil changes are at 15,000 mile. I attribute a lot of those good numbers to sea foam in the fuel.
I also...

6 Replies

530 Views

Last post by Tmooreheadf
Thu May 19, 2022 9:12 pm
Spare Tire Carrier

Last post by MNToys « Thu May 19, 2022 8:54 pm
Posted in Classifieds - Parts
Replies: 2
by MNToys » Wed May 18, 2022 9:15 pm » in Classifieds - Parts

First post

Awesome accessory rear spare tire carrier. Holds two tires. License plate bracket attached. Made by Humboldt Machine and Stamping Co. Long Island City NY. This was on the back of an ‘11 I had. It clamps around the frame/spring. Needs new leather straps. I can disassemble and get it into a reasonable sized box for shipping or pick it up in northern...

Last post

Sold pending payment. Thanks!

2 Replies

368 Views

Last post by MNToys
Thu May 19, 2022 8:54 pm
WTB: Front spring, 7 leaf, rounded and tapered ends

Last post by jaybee47 « Thu May 19, 2022 6:27 pm
Posted in Classifieds - Parts

by jaybee47 » Thu May 19, 2022 6:27 pm » in Classifieds - Parts

WTB: Front spring, 7 leaf, rounded and tapered ends.

0 Replies

101 Views

Last post by jaybee47
Thu May 19, 2022 6:27 pm
Little Hershey in Belvidere Illinois

Last post by TRDxB2 « Thu May 19, 2022 6:16 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by Dave Lantz » Thu May 19, 2022 5:31 pm » in General Discussion Forum (started 2019)

First post

At the Boone County Fairgrounds Route 76 in Belvidere Illinois
May 21st starting at 6 am Gate 3 entrance
Vendor spaces availible at the gate
Hosted by Rockford Model T club
littlehershey1@gmail.com for more info

Last post

Stopping at Bob's?

1 Replies

127 Views

Last post by TRDxB2
Thu May 19, 2022 6:16 pm
Parts Books

Last post by A Whiteman « Thu May 19, 2022 5:38 pm
Posted in General Discussion Forum (started 2019)
Replies: 8
by Original Smith » Wed May 18, 2022 1:51 pm » in General Discussion Forum (started 2019)

First post

I have a good sized collection of original Ford T literature, and have heard for many years, the Ford actually had a listing of Ruckstell parts in his late parts book. I finally saw an example of one of these on the Ford fix website. It is a fake to be sure, probably botched together by Polyprints back in the sixties. They even misspelled AXLE!...

Last post

It appears to me that the reprint is a collection of two documents for the convenience of owners and restorers. That is how I use it.
For collectors of documents this would be an important issue, for owners looking for information it was a great idea I think.

8 Replies

398 Views

Last post by A Whiteman
Thu May 19, 2022 5:38 pm
I found a few lumps when I dropped the pan

Last post by Rata Road « Thu May 19, 2022 5:01 pm
Posted in General Discussion Forum (started 2019)
Replies: 18
by Rata Road » Wed May 18, 2022 3:23 am » in General Discussion Forum (started 2019)

First post

DSCN2754.JPG

Bit of white metal I guess.

Still running....

Last post

Plenty of interesting feedback guys, thanks.
I worked in a garage after school a long time ago and the mechanics would sometimes use 50/50 Kero & engine oil mix, run the engine on fast idle for 10 mins then drain. I've never done it.

I pulled the pan off my 1930 Triumph Super 7 that I just purchased after I drained the oil. The oil drain out was...

18 Replies

707 Views

Last post by Rata Road
Thu May 19, 2022 5:01 pm
FS 1913 oil pan and steering column

Last post by KimDobbins « Thu May 19, 2022 4:55 pm
Posted in Classifieds - Parts
Replies: 3
by KimDobbins » Thu May 19, 2022 2:06 pm » in Classifieds - Parts

First post

Genuine 1913 oil pan with the deep sump. Usual cracks in the corners, otherwise it’s pretty good.$350.00 plus shipping. 1913 steering column, good condition. $275.00 plus shipping. kdmks AT att.net.

Last post

Column is sold

3 Replies

295 Views

Last post by KimDobbins
Thu May 19, 2022 4:55 pm
amp gauge 1927 2 door sedan

Last post by RajoRacer « Thu May 19, 2022 4:50 pm
Posted in Forum Support Questions
Replies: 1
by David TT » Wed May 18, 2022 7:27 pm » in Forum Support Questions

First post

the car has been sitting for 12 years in a climate controlled shop since driven not touched. no mice put in new battery negative ground. the amp gauge shows discharge when running but when shut off turn on lights shows charge
don't know what to do HELP

Last post

Sounds as though the wires are crossed on the ammeter - the new repro small meters are wire for Model A w/positive ground.

1 Replies

64 Views

Last post by RajoRacer
Thu May 19, 2022 4:50 pm
What is it...?

Last post by Kevin Pharis « Thu May 19, 2022 4:50 pm
Posted in General Discussion Forum (started 2019)
Replies: 33
by Kevin Pharis » Fri May 13, 2022 9:34 pm » in General Discussion Forum (started 2019)

First post

Heard a gentle popping noise... and found this?!🤔

0AF6D9AD-8CD7-4EAF-BA1E-039B371F7BFD.jpeg

Last post

Kevin,

Those are very nice...did they fall off of a monkey on a cold day?

Sure did! Good thing the are non-sparking😉

33 Replies

1456 Views

Last post by Kevin Pharis
Thu May 19, 2022 4:50 pm
What year is my T?

Last post by speedytinc « Thu May 19, 2022 3:54 pm
Posted in General Discussion Forum (started 2019)
Replies: 34
by Alabamacpa55 » Wed May 18, 2022 3:10 pm » in General Discussion Forum (started 2019)

First post

I purchased a Touring a few months ago and it came with a 1997 tag receipt that says it is a 1919. The engine number is 6186775 which is a 1922. It has light switch and amp meter on the drivers door panel but has electric start button on the floor. It has kerosine lamps with brass top and brass doors and a Bauer Fatman steering wheel. How can I...

Last post

It looks like an early Johnny Cash Cadillac, his was a 49, 50, 51, 52, 53, etc.

That T is a 19, 20, 21, 22.

The firewall looks like wood to me.

That would make it earlier rather than later.

Yes in enlarging the pix, its wood.

34 Replies

586 Views

Last post by speedytinc
Thu May 19, 2022 3:54 pm
Out on the road

Last post by Norman Kling « Thu May 19, 2022 1:59 pm
Posted in General Discussion Forum (started 2019)
Replies: 11
by Dollisdad » Wed May 18, 2022 7:25 pm » in General Discussion Forum (started 2019)

First post

EE9B34B1-80E0-45EB-9A16-67D9662C0307.jpeg 0C83EC94-7C6E-4E4F-98F8-41769F4845AB.jpeg 44CE9648-9F4F-482A-BF06-C03C9AC9D6A5.jpeg 6FF30E69-1F9C-4F84-A979-009E752B1576.jpeg

Last post

That cat is big enough to pull a wagon, but is likely more stubborn than a mule :lol:
Norm

11 Replies

554 Views

Last post by Norman Kling
Thu May 19, 2022 1:59 pm
WTB '26-'27 touring top bows/irons

Last post by DaveD « Thu May 19, 2022 1:26 pm
Posted in Classifieds - Parts

by DaveD » Thu May 19, 2022 1:26 pm » in Classifieds - Parts

WTB 1926-1927 Touring top bows/irons. Cosmetics unimportant but need to be complete. Seattle to Portland area please. Best to contact by email, dave2816@centurylink.net Thanks!

0 Replies

61 Views

Last post by DaveD
Thu May 19, 2022 1:26 pm
Cast iron muffler ends fs

Last post by RajoRacer « Thu May 19, 2022 12:53 pm
Posted in Classifieds - Parts
Replies: 1
by CTLeonard » Thu May 19, 2022 12:14 pm » in Classifieds - Parts

First post

I have a T1201 c rear, and a T1202 b, front. As confusing as it can be, going thru the encyclopedia, I still can't come up with a year. I'm in the 12-13 era. The bolt circle radius was changed from 2.25 to 2 3/16. This one is 2 3/16. A v- notch was also added to aid in installation. 75.00 for the pair plus shipping IMG_20220519_101711455.jpg...

Last post

Those would be '14 & a bit later because of the integral brackets - '13 & earlier utilized separate sheet metal brackets.

1 Replies

196 Views

Last post by RajoRacer
Thu May 19, 2022 12:53 pm
Paint colr details 1912 commercial roadster

Last post by RGould1910 « Thu May 19, 2022 12:44 pm
Posted in General Discussion Forum (started 2019)
Replies: 4
by RGould1910 » Thu May 19, 2022 12:47 am » in General Discussion Forum (started 2019)

First post

I am painting my 1912 commercial roadster dark blue with black fenders. Were the open door sill moldings painted blue or black? What about the hood former, the hood shelves and rear sear riser molding that curves up from the floorboard to the top of the platform the rear seat sits on. The car won't be pin striped.

Last post

Good advice. Once problem. The black is already purchased and being a custom color, can't be returned. Thinking on it, there shouldn't be much contrast as the blue is very dark. I'll probably stick with black on the fenders, splash and running boards, the hood former and front seat sill The rear section, I'll paint all blue. If I don't like the...

4 Replies

238 Views

Last post by RGould1910
Thu May 19, 2022 12:44 pm
Wanted: NOS perches and spindles

Last post by Stephen_heatherly « Thu May 19, 2022 12:27 pm
Posted in Classifieds - Parts
Replies: 3
by Stephen_heatherly » Tue May 17, 2022 8:08 am » in Classifieds - Parts

First post

I'm looking for a set of nos 1919-27 front axle spring perches and a set of nos 25 and earlier spindles.

Thank you,
Stephen

Last post

Spindles found! Still need perches

Stephen

3 Replies

201 Views

Last post by Stephen_heatherly
Thu May 19, 2022 12:27 pm
Foto of the Day

Last post by Rich Eagle « Thu May 19, 2022 12:24 pm
Posted in General Discussion Forum (started 2019)
Replies: 570
by Rich Eagle » Mon May 20, 2019 12:03 pm » in General Discussion Forum (started 2019)
1

2

3

4

5

6
First post

When I take photos I often compose them like I might a painting. I thought a thread of photos with interesting colors, textures or situations might be fun. I know many of us have amusing ones here and there.

This one is of my precarious Coupe body waiting to be lowered onto the chassis. I was choosing the appropriate nuts and bolts for the spare...

Last post

Proud owner 1965.
362.png
570 Replies

117297 Views

Last post by Rich Eagle
Thu May 19, 2022 12:24 pm
SUPER SALE

Last post by Original Smith « Thu May 19, 2022 11:06 am
Posted in Classifieds - Parts
Replies: 28
by Chaffins » Sun Apr 10, 2022 12:50 pm » in Classifieds - Parts

First post

TONS OF CHEAP MODEL T PARTS. INQUIRE AS TO WHAT YOU NEED. PHONE 951-393-0257, EMAIL chaffin0394@gmail.com

Starters and Generators $10.00
Good Transmission Drums $50.00
Good Transmission parts, inquire
Camshafts $10.00
Coils, Condition unknown $1.00
Front and Rear Hubs $5.00
Good rear axles and Gears $10.00
NH carburetors $35.00
Kingston...

Last post

Glen: Might you have any original Ruckstell fiber washers? NOS, or used.

28 Replies

3999 Views

Last post by Original Smith
Thu May 19, 2022 11:06 am
FS American Bosch distributor and Atwater Kent front plate

Last post by Jerry VanOoteghem « Thu May 19, 2022 10:27 am
Posted in Classifieds - Parts
Replies: 2
by KimDobbins » Wed May 18, 2022 7:27 pm » in Classifieds - Parts

First post

Distributor is Bosch, good shape the complete. Atwater Kent front plate with a new set of matching gears from Dan Mceachern.$225 plus shipping. kdmks AT att.net.

Last post

Interesting marriage of Bosch & AK. I have never seen an AK front plate for a generator era T.

2 Replies

285 Views

Last post by Jerry VanOoteghem
Thu May 19, 2022 10:27 am

Search found 206 matches

Go to advanced search