MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 119 matches

Topics

Replies

Views

Last post

WTB - Brass windshield

Last post by blauvelt « Sat Jul 12, 2025 11:58 am
Posted in Classifieds - Parts
Replies: 4
by blauvelt » Mon Jun 23, 2025 11:56 am » in Classifieds - Parts

First post

Looking for a brass windshield, if it has glass can drive to Arizona/SoCal/New Mexico?

Last post

Not picky, replacing the one stolen off my fathers T along with all the rest of the brass when he was in Vietnam. He had built it out of two tops when he was a kid.

What year/type - even halves ?

4 Replies

565 Views

Last post by blauvelt
Sat Jul 12, 2025 11:58 am
Strong kickback on crank since replacing the timer

Last post by NealW « Sat Jul 12, 2025 11:32 am
Posted in General Discussion Forum
Replies: 9
by rainer » Sat Jul 12, 2025 8:33 am » in General Discussion Forum

First post

Hi.
Meanwhile I successfully replace the roller timer by a new (similar) one.
I also verified the distance of 65mm / 2.5 between spark advance rod on timer and the screw at oil fill socket.

Because the battery was empty, I connected the battery charger and tried to crank start the engine for first test run while the battery is charging.

Of...

Last post

When you replaced the rotor, did the camshaft have the hole for the rotor pin drilled all the way through the camshaft? Earlier camshafts were made that way. If so, you may have installed the rotor 180 degrees out of phase.

9 Replies

101 Views

Last post by NealW
Sat Jul 12, 2025 11:32 am
Wanted: Stromberg LF Literature or Info

Last post by RajoRacer « Sat Jul 12, 2025 11:32 am
Posted in Classifieds - Parts
Replies: 5
by RajoRacer » Fri Jul 11, 2025 7:53 pm » in Classifieds - Parts

First post

Anyone happen to have any literature on a LF - diagrams, cut-aways, etc ?

Last post

The late Stan Howe also re-printed the OF manual.

5 Replies

115 Views

Last post by RajoRacer
Sat Jul 12, 2025 11:32 am
Want to Find a Mercury, Paco, or Similar Period Correct Speedster

Last post by TXGOAT2 « Sat Jul 12, 2025 11:26 am
Posted in General Discussion Forum
Replies: 15
by NorthSouth » Thu Jun 26, 2025 6:48 pm » in General Discussion Forum

First post

-
Hello fellow Model T-ers,

I am looking for a Mercury, or Paco, or similar period correct bodied speedster in restored condition.
Would any of you know of one that might be for sale. I am aware of one in Sweden. Area code: (323)

Steve
497+ ...0601
-

Last post

I don't know specifically what they are, other than being T-based speedsters.

15 Replies

1001 Views

Last post by TXGOAT2
Sat Jul 12, 2025 11:26 am
What lubrication for Original Roller Timer?

Last post by TXGOAT2 « Sat Jul 12, 2025 11:24 am
Posted in General Discussion Forum
Replies: 27
by rainer » Fri Jul 11, 2025 1:34 pm » in General Discussion Forum

First post

Hello.
Because my old Roller Timer is heavily worn out, I organized a replacement one and want to do it right from the beginning.
What lubrication is best directly inside the roller's bore?

Personally I am inclined to spray in some motorcycle chain grease , because it has high adhesion and viscosity. It is also very thin during spraying and...

Last post

An original Ford timer will fit properly and work properly if maintained properly. A good reproduction timer will do likewise. It's important that the engine timing cover be properly located relative to the camshaft. If it isn't, several problems will arise, rapid timer wear being one of them.

27 Replies

295 Views

Last post by TXGOAT2
Sat Jul 12, 2025 11:24 am
Car Show Today - Appleton City MO 7/12/25

Last post by Lyndon « Sat Jul 12, 2025 11:14 am
Posted in General Discussion Forum

by Lyndon » Sat Jul 12, 2025 11:14 am » in General Discussion Forum

Big car show today The Ford dealership is well worth the drive. Zinc Motors, one of only 2 dealerships in the state of Missouri that still operates out of their original building. A building that Henry Ford designed. If There is any interest in interior pictures, I can add more pictures next week

0 Replies

12 Views

Last post by Lyndon
Sat Jul 12, 2025 11:14 am
Texas T Alternator

Last post by TXGOAT2 « Sat Jul 12, 2025 11:03 am
Posted in General Discussion Forum
Replies: 1
by tom_strickling » Sat Jul 12, 2025 10:31 am » in General Discussion Forum

First post

I think I know the answer but I will ask anyway. I just installed a Texas T Alternator on my 1918 touring. I did not realize that it is a 12 volt alternator. I use an 8 volt battery because I like it and I want to. The question is>>>>Is it OK to have this 12 volt alternator with an 8 volt battery. If not, what are my options besides taking the...

Last post

12 volt battery, lights, and starter.

1 Replies

25 Views

Last post by TXGOAT2
Sat Jul 12, 2025 11:03 am
Car transport fantastic service

Last post by tom_strickling « Sat Jul 12, 2025 10:52 am
Posted in General Discussion Forum
Replies: 5
by Jack Putnam, in Ohio » Wed Jul 09, 2025 12:25 pm » in General Discussion Forum

First post

Took delivery this past week of a car delivered by Bill Auto Works. Fantastic service by Bill Squires who was very easy to deal with, very commutative. Always called to report progress with on time delivery. Quoted a price up front and stuck to the Quote. No surprises. Very professional, would use again.

Last post

JACK

I sent you an email

5 Replies

315 Views

Last post by tom_strickling
Sat Jul 12, 2025 10:52 am
MEME of the week

Last post by ironhorse « Sat Jul 12, 2025 10:47 am
Posted in OT - Off topic
Replies: 20
by ironhorse » Tue Mar 11, 2025 9:26 am » in OT - Off topic

First post

Screenshot_7-3-2025_10813_www.google.com_.jpeg

Last post

alligatoralcatraz.jpg

20 Replies

11115 Views

Last post by ironhorse
Sat Jul 12, 2025 10:47 am
Avoid scammers. Don't post personal info!

Last post by blauvelt « Sat Jul 12, 2025 10:42 am
Posted in Classifieds - Parts
Replies: 7
by AdminJeff » Wed Sep 18, 2024 8:20 pm » in Classifieds - Parts

First post

To Avoid scammers, Don't post personal info! This includes your email address, & phone number.
Do so at your own risk.
It's better to communicate through the forum system.

AdminJeff

Last post

Should we start a public list of scammers emails? Right now I’ve got two who are trying really hard…they might get lucky and find a picture of what I am actually looking for.

Would also add this to the list of scammers emails tricks:

1. An email copying in another person who has exactly what you are looking for.

2. To combat fake/ stolen images...

7 Replies

11268 Views

Last post by blauvelt
Sat Jul 12, 2025 10:42 am
WTB - Joe Morris crankshaft

Last post by blauvelt « Sat Jul 12, 2025 10:39 am
Posted in Classifieds - Parts
Replies: 5
by blauvelt » Thu Jul 10, 2025 12:48 am » in Classifieds - Parts

First post

Curious if one is out there.

Last post

I figured it was more of hunting for a piece of art and history than anything else. Wasn’t sure if any had survived.

Joe Morris made several T crankshafts (couple dozen?) back in the 70’s-80’s. They were fabricated from pins and webs, and meticulously pressed and welded together. Beautiful cranks, but unfortunately most have already broken. I...

5 Replies

387 Views

Last post by blauvelt
Sat Jul 12, 2025 10:39 am
MY 1924 coupe and experiences as a new driver/owner

Last post by Mark Nunn « Sat Jul 12, 2025 10:26 am
Posted in General Discussion Forum
Replies: 151
by WillyR » Wed Apr 09, 2025 11:45 am » in General Discussion Forum
1

2
First post

The journey:

Last fall I joined this forum.

Shortly after I found a local model T club and joined, along with my 12 year old son.

I was immediately welcomed and impressed by the people as well as the car. (the club has work days regularly at least 1 -2 per month)

I wasn't completely prepared to get a car... but I was inspired to begin...

Last post

My Fulton cutout had been brazed to an exhaust pipe at some time in its life. (What a mess that was to clean up.) Getting a good seal has always been an issue with these.
151 Replies

31300 Views

Last post by Mark Nunn
Sat Jul 12, 2025 10:26 am
Got any twinkies?

Last post by KWTownsend « Sat Jul 12, 2025 10:07 am
Posted in General Discussion Forum
Replies: 5
by Dollisdad » Fri Jul 11, 2025 10:39 pm » in General Discussion Forum

First post

IMG_2880.jpeg IMG_2839.jpeg IMG_2857.jpeg IMG_2853.jpeg

Last post

No Twinkies.
How about a turnover?

Pie truck turnover.jpg

: ^ )

5 Replies

198 Views

Last post by KWTownsend
Sat Jul 12, 2025 10:07 am
question on how to adjust/test coils

Last post by TXGOAT2 « Sat Jul 12, 2025 8:33 am
Posted in General Discussion Forum
Replies: 26
by LittleTimmy52 » Tue Jul 08, 2025 11:23 am » in General Discussion Forum

First post

one of my coils are weak, i know because when starting if the commutator is rotated such that one of the coils is buzzing before i crank it, sometimes i hear a strong buzz other times its weaker, and sometimes its real strong, I don't know which coil(s) are making the weaker noise nor do I have access to a tester, how do I get them all going about...

Last post

A buzz box is much better than trying to adjust coils by ear . But an HCCT is FAR BETTER, and an ECCT is best.

26 Replies

596 Views

Last post by TXGOAT2
Sat Jul 12, 2025 8:33 am
Cams on Pedals

Last post by Dan Hatch « Sat Jul 12, 2025 8:26 am
Posted in General Discussion Forum
Replies: 2
by Dan Hatch » Sat Jul 12, 2025 5:34 am » in General Discussion Forum

First post

Anyone ever come up with a good way to rebuild the worn cam ramps on pedals? Hate to scrap a bunch of them if way to repair. Thanks Dan

Last post

Thanks Allen but. Clutch aka high/low pedal has cam and slow speed notch inside and are both reproduced for US LHD cars.
It is the reverse and Brake pedal that have cams made in the pedal.
Easy way for brake is to get a Rocky Mountain brake pedal I guess.

Anyone found an easy for the other pedals?

2 Replies

98 Views

Last post by Dan Hatch
Sat Jul 12, 2025 8:26 am
New batch of Stevens Front Axle insert ready FS

Last post by Dan Hatch « Sat Jul 12, 2025 2:06 am
Posted in Classifieds - Parts
Replies: 110
by Dan Hatch » Thu Jun 15, 2023 4:37 pm » in Classifieds - Parts
1

2
First post

Just finished a new run of Upper and Lower Stevens Front Axle Inserts. Sorry, but yes there is a price increase.
Upper Tapered Inserts $4.25 each
Lower Threaded Inserts $6.25 each
All + shipping. Email me by forum.Not by PM. Thanks Dan
IMG_2391.jpeg
IMG_0598.jpeg

Last post

Once again, send me an email through the forum. Dan
110 Replies

22542 Views

Last post by Dan Hatch
Sat Jul 12, 2025 2:06 am
Tool Time

Last post by Craig Leach « Sat Jul 12, 2025 1:46 am
Posted in OT - Off topic
Replies: 128
by Bryant » Mon Aug 29, 2022 6:35 pm » in OT - Off topic
1

2
First post

Picked up this gem this weekend. Appears well built. Anyone play with one like it? 6B5DE632-49E4-490B-98CC-85AD0EAB075A.jpeg I figured it would be useful with the T project amongst other things. If you have a cool Tool post it. Might be fun to see
Bryant

Last post

That would be correct & still made today as I understand.
Craig.
128 Replies

885414 Views

Last post by Craig Leach
Sat Jul 12, 2025 1:46 am
1915-16 Touring Car Project For Sale

Last post by Chris Paulsen « Fri Jul 11, 2025 11:35 pm
Posted in Classifieds - Parts
Replies: 4
by Chris Paulsen » Wed Jul 09, 2025 12:05 am » in Classifieds - Parts

First post

We've got this project for sale. Mostly correct 1915, and mostly complete. See the photos. Engine casting date of 11-9-1915, makes it a 1916 model, but still eligible for HCCA events. The front half of the body has the wood replaced. The rear seat is off and disassembled. Correct and solid fenders. Has demountable wheels but 30x3 non-demountable...

Last post

We’ve had some interest, but it’s still available. How about a price drop to $1,750. Happy to discuss trades for smaller stuff, parts, shiny brass, etc.

4 Replies

391 Views

Last post by Chris Paulsen
Fri Jul 11, 2025 11:35 pm
WTB ‘26-‘27 Tail Lights

Last post by ModelTWoods « Fri Jul 11, 2025 10:28 pm
Posted in Classifieds - Parts
Replies: 10
by schwabd1 » Wed Jul 09, 2025 6:40 pm » in Classifieds - Parts

First post

Looking for a pair of ‘26-‘27 tail lights, (actually I think they started to use the drum tail light in 1924) one license bracket and left and right fender mounting brackets or any of those parts.

Last post

David, email works for me. I sent you an email.

10 Replies

338 Views

Last post by ModelTWoods
Fri Jul 11, 2025 10:28 pm
I'm Stymied - spark lever swivel

Last post by Pep C Strebeck « Fri Jul 11, 2025 10:15 pm
Posted in General Discussion Forum
Replies: 8
by Oldav8tor » Fri Jul 11, 2025 7:01 pm » in General Discussion Forum

First post

I'm putting my car back together after removing the steering wheel, firewall and etc. in anticipation of some engine work that has been postponed until winter.

I went to connect the commutator rod and when I tried to connect the swivel end, I couldn't find the nut. No big deal, right? I went thru my entire collection of nuts, both SAE and AN...

Last post

7/32-32

Like Scott said above 7/32 - 32 listed in the original parts manuals, T-3536 and T-3537 (swivel and jamb nut). Close to a 12-.32, but it's not.

8 Replies

180 Views

Last post by Pep C Strebeck
Fri Jul 11, 2025 10:15 pm
Find the 'Ford'

Last post by CDooREDW « Fri Jul 11, 2025 9:26 pm
Posted in General Discussion Forum
Replies: 8
by 1925 Touring » Thu Jul 10, 2025 1:46 pm » in General Discussion Forum

First post

It's always fun, to me, when working on the T, to look for where there is 'Ford' stamped into each and every part. I thought this would be a fun thread to have, posting pictures of all the 'ford's on our Fords. :)

Here's one, on a rear axle shaft.
Where's the ford on your car?
20250701_175001.jpg

Last post

IMG_0479.jpeg

8 Replies

433 Views

Last post by CDooREDW
Fri Jul 11, 2025 9:26 pm
What have you done to/with your Model T in July?

Last post by Sean Butler « Fri Jul 11, 2025 8:41 pm
Posted in General Discussion Forum
Replies: 9
by varmint » Sat Jul 05, 2025 12:40 pm » in General Discussion Forum

First post

What have you done to/with your Model T in July?

Was so excited to get our new starter that I installed it last month and tested it out - problem solved.
This month, I removed the starter, made a gasket and installed it again - still starts.
Like the old saying someone wrote in my high school yearbook: Don't wait until tomorrow to do what you can...

Last post

Took D.W. out to the local winery where we were able to refill our own tanks.

9 Replies

576 Views

Last post by Sean Butler
Fri Jul 11, 2025 8:41 pm
WTB - Gas Headlight Mirrors for 1914 Moldel T

Last post by Allan « Fri Jul 11, 2025 8:31 pm
Posted in Classifieds - Parts
Replies: 17
by bdtutton » Tue Jul 01, 2025 12:22 pm » in Classifieds - Parts

First post

Hello,
I am looking for a really good set of gas headlight mirrors for my 1914 Model T. I have a set of the nickel plated brass reflectors and halogen bulbs they sell at Snyders and Langs, but I would like something brighter if possible. I think I could get a little better headlight performance from a set of original gas headlight mirrors. Does...

Last post

You are a tease Bryan. Re-silvering you originals is the way to go. You are lucky to have them intact.

Allan from down under.

17 Replies

1137 Views

Last post by Allan
Fri Jul 11, 2025 8:31 pm
MODEL T COACH FOR SHERMAN, CT HISTORICAL SOCIETY

Last post by Fire_chief « Fri Jul 11, 2025 6:52 pm
Posted in General Discussion Forum
Replies: 3
by sduncan » Fri Jul 11, 2025 8:49 am » in General Discussion Forum

First post

I am donation our family 1915 Model T Touring car to the Sherman, CT Historical Society. I live in TN. The car is going back home but the team that will garage and drive the car isn't familiar with the 3-pedal Model T. I'm searching for a person that is willing to teach the Sherman, CT Model T care team how to drive the car. George Akin, President...

Last post

Sherman is a little over an hour from me. I'm listed in both magazines, or a family member is. Have them give me a call, or send a text through here. Charlie

3 Replies

216 Views

Last post by Fire_chief
Fri Jul 11, 2025 6:52 pm
Wanted: 34x4 or 35x4 1/2" CLINCHER Tires

Last post by GGZ « Fri Jul 11, 2025 6:17 pm
Posted in Classifieds - Parts
Replies: 5
by GGZ » Tue Jul 08, 2025 9:40 pm » in Classifieds - Parts

First post

I know these aren't for Model Ts, but, you never know....I need 34x4 or 35x4 1/2 CLINCHER tires for 26 wheels. Condition could be fair to excellent. I can use one to five. I don't want straight side, I have a new set of those . I could also trade the new straight side 34×4 set for a new set of 875x105 clinchers. Thanks. Email at motoringicons (at)...

Last post

No. They do not have any removable lock rings. One piece rims just like a Model T but 26 .I have a set of new Coker 34x4 but they are straight side.

5 Replies

240 Views

Last post by GGZ
Fri Jul 11, 2025 6:17 pm
Enclosed Car Window Crank Handles

Last post by ModelTWoods « Fri Jul 11, 2025 5:35 pm
Posted in General Discussion Forum
Replies: 3
by ModelTWoods » Fri Jul 11, 2025 11:52 am » in General Discussion Forum

First post

Due to the unavailable reproductions of 26-27 enclosed car window crank handles, I, like everyone else, has had to resort to using the reproduction Model A handle that tightens with a set screw on the regulator shaft. I have seen window crank handle that reportedly are original Model T, but the handle has a big hole in the outside and is held to...

Last post

Here are some links to previous discussions to add to some confusion
Dave Sosnoski researching handles
Differences
Regulator for 1926 to 1931

Thanks Frank for posting the links. The last one was to my own old post in 2011. I had forgotten about that post. It's Hell to get old.

3 Replies

108 Views

Last post by ModelTWoods
Fri Jul 11, 2025 5:35 pm
Model T Roadster Pickup with 1924 Engine (price reduced)

Last post by JMallak « Fri Jul 11, 2025 2:41 pm
Posted in Classifieds - Vehicles
Replies: 2
by JMallak » Tue May 13, 2025 1:13 pm » in Classifieds - Vehicles

First post

Model T Roadster Pickup with 1924 Engine

1924 Engine, 1925 Pickup Box, 1926 Rear End

Rebuilt mechanically from front to back. New rubber. Crank start.

Includes engine stand, Model T tool set and misc. parts and tools.

$12,000.00, Contact John @ 320-582-1737, Hutchinson, MN

mtfca1.jpg

mtfca2.jpg

20250507_104403.jpg

mtfca4.jpg...

Last post

New price is $9500

2 Replies

2737 Views

Last post by JMallak
Fri Jul 11, 2025 2:41 pm
NATIONWIDE SINGLE CAR TRANSPORT, OPEN OR ENCLOSED

Last post by Bills Auto Works « Fri Jul 11, 2025 11:55 am
Posted in Services
Replies: 143
by Bills Auto Works » Sun Jan 20, 2019 11:32 am » in Services
1

2
First post

Hello Everyone,

I am starting my 36th year of business in 2019 & have well OVER 3.5 million accident free transport miles . This equates to more than 2500 vehicles transported. Please see this link for hundreds of all positive references posted by the ACTUAL Hamb members who have used my service in the past. I do NOT post my own feedback & I do...

Last post

Hello Everyone,

I have an Enclosed Transport spot still available on Wed. July 16th from New Hampshire, Vermont, Mass, Eastern New York, Etc back towards Ohio, Michigan, Indiana, etc.

Please see this link for HUNDREDS of all positive feedback posted by the actual customers who have used my service in the past...NOT BY ME!

Give me a call,...
143 Replies

169496 Views

Last post by Bills Auto Works
Fri Jul 11, 2025 11:55 am
Henry, we have a problem!

Last post by RajoRacer « Fri Jul 11, 2025 11:39 am
Posted in General Discussion Forum
Replies: 20
by JTT3 » Wed Jul 09, 2025 10:56 pm » in General Discussion Forum

First post

1910 touring, original saddles, reproduction top sockets with the following measurements:
Top socket width 1-45/128
Saddle gap width 1-27/128

Now what to do?
Does anyone have a pair of top saddles that have a wider gap that are the same profile? I think the early saddles are cast so heating and bending is out if they are cast I suppose & would...

Last post

My apologies - I meant long gone as in retired ! Erik B. would know if he's still on the planet.

20 Replies

691 Views

Last post by RajoRacer
Fri Jul 11, 2025 11:39 am
coil testing and setup in N. Ohio

Last post by love2T's « Fri Jul 11, 2025 10:39 am
Posted in General Discussion Forum
Replies: 1
by johnr » Fri Jul 11, 2025 9:48 am » in General Discussion Forum

First post

Anyone doing coil testing and tuning located in nothern ohio.

Thank you

johnr

Last post

Send 'em to Brent Mize down near Columbus.

1 Replies

109 Views

Last post by love2T's
Fri Jul 11, 2025 10:39 am
For Sale: Bosch ZR6 Magneto

Last post by GGZ « Fri Jul 11, 2025 10:35 am
Posted in Classifieds - Parts

by GGZ » Fri Jul 11, 2025 10:35 am » in Classifieds - Parts

Ok, I know this magneto has 2 more terminals for this crowd, but there might be an early six cylinder person that needs one. Brass base. Has the original Bosch bakelite knobs. Clockwise. Gives a good spark when you spin it. Good condition, complete, not tampered with, etc. A good magneto. Price is 495.00. Call me at 734-730-4274 or email me...

0 Replies

122 Views

Last post by GGZ
Fri Jul 11, 2025 10:35 am
120 years ago, July 9th, 1905

Last post by Cruby « Fri Jul 11, 2025 9:59 am
Posted in Early Ford Forum - pre-T
Replies: 1
by Rob » Thu Jul 10, 2025 8:27 pm » in Early Ford Forum - pre-T

First post

This is the earliest announcement-article I’ve seen of the impending Model N. While many things are incorrect (wheelbase, opposed cylinders, $400 price, etc.), many are spot on (cylinders cast in pairs, horsepower per pair-8, etc.).

IMG_8724.jpeg

Last post

I find it interesting that Roller Bearings are noted in the article.

1 Replies

36 Views

Last post by Cruby
Fri Jul 11, 2025 9:59 am
Re: Ford Model T Touring from year 1910

Last post by Daisy Mae « Fri Jul 11, 2025 9:11 am
Posted in General Discussion Forum
Replies: 57
by Steve Jelf » Thu Jun 26, 2025 5:59 pm » in General Discussion Forum

First post

Maros, if you sincerely want a 1910 Ford take heart. You can have one. But, if you haven't noticed, the world is full of crooks. They will sell you a 1953 Willys and tell you it's a 1910 Ford. You have homework to do. You must study early Fords enough to have a good grasp of their identifying features. The more you know about a real 1910 Ford, the...

Last post

Hmmmm
The plot thickens.
I stand by my earlier post.

Nuff said...

57 Replies

3627 Views

Last post by Daisy Mae
Fri Jul 11, 2025 9:11 am
speedo swivel drive parts.

Last post by Allan « Fri Jul 11, 2025 8:37 am
Posted in Classifieds - Parts
Replies: 1
by Allan » Sat Jul 05, 2025 8:59 am » in Classifieds - Parts

First post

I have these two original parts available. New reproduction are $79.95 each plus shipping.
These are $60 each with tracking postage delivered to your door. Either one, or save some postage if you want both.
20250705_163847.jpg
20250705_165854.jpg
Allan from down under

Last post

S bracket sold. L bracket still available.

Allan from down under.

1 Replies

411 Views

Last post by Allan
Fri Jul 11, 2025 8:37 am
Calcium Carbide vs Acetylene in MC Cylinder for Headlamp use...s

Last post by Jerry VanOoteghem « Fri Jul 11, 2025 7:59 am
Posted in General Discussion Forum
Replies: 16
by BRENT in 10-uh-C » Wed Jun 25, 2025 12:34 pm » in General Discussion Forum

First post

Planning ahead, I would like to be able to use my Gas Headlamps at OCF parade or at a evening Cruise-in display. I am on the fence on whether I would like to use a small 10cf tank of Acetylene, -or Carbide (-see link below) in my Carbide Generator tank. How much difference in light (Lumens??) output will I see with one type of fuel over the...

Last post

I've seen the B tanks hung from the rear cross member of the frame, if that's any help whatsoever. (Not on Model T's, of course)

16 Replies

1053 Views

Last post by Jerry VanOoteghem
Fri Jul 11, 2025 7:59 am
1911 Ford Touring For Sale

Last post by Dgpoff « Fri Jul 11, 2025 12:50 am
Posted in Classifieds - Vehicles
Replies: 8
by Dgpoff » Tue Apr 15, 2025 11:10 pm » in Classifieds - Vehicles

First post

Largely original 1911 Touring #552xx, May 1911. Ex Sherwood and Lang. known history to new. Mechanically rebuilt including engine and transmission by McTavish. Beautiful original upholstery. 90% original sheet metal. Way too nice to restore. It’s only original once. Runs very well and has been toured. Combination of 50’s and early 2000’s paint. A...

Last post

Can you please provide additional photos, especially engine, under carriage and front interior. Is this original engine and what is the block engine number? Many thanks...
Mike Barrett

Mike I sent you a private message. I have a google drive with 100 pictures I can send to you. Need an email address.

8 Replies

5518 Views

Last post by Dgpoff
Fri Jul 11, 2025 12:50 am
Vanderbrink Auction with 1915 Couplette body and other T parts and cars

Last post by dobro1956 « Fri Jul 11, 2025 12:18 am
Posted in General Discussion Forum

by dobro1956 » Fri Jul 11, 2025 12:18 am » in General Discussion Forum

Vanderbrink Auctions has an online only estate auction coming up in Montana It has lots of early stuff with some Model T cars and parts cars. Other early cars. 1909 REO is oldest to 1960s era with some later stuff. A huge auction with a good selection of cars, trucks, tractors, hit miss engines and other unique stuff. There is a 1915 Couplette...

0 Replies

251 Views

Last post by dobro1956
Fri Jul 11, 2025 12:18 am
Perfecto shifter?

Last post by RGould1910 « Thu Jul 10, 2025 11:09 pm
Posted in General Discussion Forum
Replies: 10
by Craig Leach » Sun Jul 06, 2025 9:20 pm » in General Discussion Forum

First post

Has anyone used or made work a Ruckstell or Hallscott shifter on a Perfecto two speed rear end? Thanks.
Craig.

Last post

The only interchangeable parts are the large ball bearing and the shifter at the transmission

10 Replies

457 Views

Last post by RGould1910
Thu Jul 10, 2025 11:09 pm
Is this for a T?

Last post by Wayne Sheldon « Thu Jul 10, 2025 7:54 pm
Posted in General Discussion Forum
Replies: 9
by BUSHMIKE » Thu Jul 10, 2025 7:19 am » in General Discussion Forum

First post

Is this mag drive for a model T?

Last post

It was a long time ago, but if I recall correctly? These can be easily adapted to fit and work on a model T car. The biggest problem is that the magneto sits out somewhat beyond the outside of the frame rail. Not much of a problem for some speedsters, however a stock bodied car with stock hood has a real problem with the aesthetics.
The other main...

9 Replies

395 Views

Last post by Wayne Sheldon
Thu Jul 10, 2025 7:54 pm
Where's the problem?

Last post by laltenhofen « Thu Jul 10, 2025 5:14 pm
Posted in General Discussion Forum
Replies: 4
by laltenhofen » Mon Jul 07, 2025 8:47 pm » in General Discussion Forum

First post

T died on the road. The starter turned the engine. I got no buss at the coils. Fuse I have in system ok.I ran a wire from pos post battery to bottom of coil box. Got coils to buzz, car to start and got home. So where is problem? Switch?

Last post

Fuse was the problem! A visual said element was not blown but ohm reading proved otherwise. Because of gen/ voltage reg problems, I have 6 v alternator on there now.

4 Replies

299 Views

Last post by laltenhofen
Thu Jul 10, 2025 5:14 pm
Clincher wheels with steel fellows and steel spokes

Last post by G.ARMS86 « Thu Jul 10, 2025 4:49 pm
Posted in Classifieds - Parts
Replies: 12
by G.ARMS86 » Fri Jul 04, 2025 12:20 pm » in Classifieds - Parts

First post

For sale pair of red painted wheels with steel fellows and steel spokes in good condition asking 250 for the pair plus shipping or can deliver to Hershey text or call 2036873827

Last post

Back to the top

12 Replies

901 Views

Last post by G.ARMS86
Thu Jul 10, 2025 4:49 pm
Some Humor to Brighten Your Day II

Last post by Jerry VanOoteghem « Thu Jul 10, 2025 4:40 pm
Posted in OT - Off topic
Replies: 494
by Rich P. Bingham » Thu Aug 10, 2023 6:10 pm » in OT - Off topic
1

2

3

4

5
First post

With apologies (and gratitude) to Freighter Jim !

Last post

AA1g0ctH.jpg

There's no defense against the Three Stooges!
494 Replies

739812 Views

Last post by Jerry VanOoteghem
Thu Jul 10, 2025 4:40 pm
Needed - A Rim Identification

Last post by Dan McEachern « Thu Jul 10, 2025 2:30 pm
Posted in General Discussion Forum
Replies: 10
by J1MGOLDEN » Sun Jul 06, 2025 8:01 pm » in General Discussion Forum

First post

Would anyone recognize what company made this rim and if it was made by Ford or an After-Market Company?

Rim.jpg

Last post

Someone correct me if I'm wrong, but these rims were a one year (1919) deal. Then Ford went to the rims with integral lugs. These rims are also used on Buffalo Disc wheels, but with a heavy retainer ring that went around the entire rim and the retainer ring was held in place with 4 lug bolts. Just FYI...........

10 Replies

380 Views

Last post by Dan McEachern
Thu Jul 10, 2025 2:30 pm
WANTED: Double Headlight Socket

Last post by mortier « Thu Jul 10, 2025 2:09 pm
Posted in Classifieds - Parts
Replies: 2
by mortier » Tue Jul 08, 2025 9:59 am » in Classifieds - Parts

First post

Seeking a headlight socket (thimble) 6574-X, new or old. Thanks!

Last post

Didn't get your email, so I sent you one, Dan!

Phil

2 Replies

297 Views

Last post by mortier
Thu Jul 10, 2025 2:09 pm
WTB 26/27 Roadster Side Curtains with rods.

Last post by 25tfire « Thu Jul 10, 2025 1:03 pm
Posted in Classifieds - Parts
Replies: 2
by 25tfire » Thu Jun 19, 2025 12:49 pm » in Classifieds - Parts

First post

Looking for a set of side curtains for a 1926/27 Roadster with Irons, any condition will work, Jim

Last post

Hi Robert, were you able to find them and are they for sale?

2 Replies

580 Views

Last post by 25tfire
Thu Jul 10, 2025 1:03 pm
WTB...RUNNUNG BOARDS 13-25

Last post by Jack Putnam, in Ohio « Thu Jul 10, 2025 12:59 pm
Posted in Classifieds - Parts
Replies: 5
by Jack Putnam, in Ohio » Mon Jul 07, 2025 4:54 pm » in Classifieds - Parts

First post

I'm in need of a pair of running boards of the 1913 to 1925 vintage. Dont need be perfect but should be respectful and worthy on new paint. Please reply using the forum message.

Last post

Yes they cost to ship, that's ok. What will I owe you for the boards? My cell 419-306-3966 for text

5 Replies

365 Views

Last post by Jack Putnam, in Ohio
Thu Jul 10, 2025 12:59 pm
WTB 1915 cowl lamps

Last post by mklooksup « Thu Jul 10, 2025 9:19 am
Posted in Classifieds - Parts
Replies: 1
by mklooksup » Sun Jun 22, 2025 8:41 pm » in Classifieds - Parts

First post

Looking for a 1915 cowl lamp or two. Black and brass type.

Thanks

Manny

Last post

any condition?

1 Replies

412 Views

Last post by mklooksup
Thu Jul 10, 2025 9:19 am
Kingston L4 carburetor

Last post by Corey Walker « Thu Jul 10, 2025 12:09 am
Posted in Classifieds - Parts

by Corey Walker » Thu Jul 10, 2025 12:09 am » in Classifieds - Parts

Completely disassembled and cleaned, viton tipped float valve, tested float, new choke spring and ID tag, test run
$185 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

152 Views

Last post by Corey Walker
Thu Jul 10, 2025 12:09 am
Collecting water from a well near Nullagine

Last post by Manuel « Wed Jul 09, 2025 10:34 pm
Posted in General Discussion Forum
Replies: 1
by John E. Guitar » Fri Jun 27, 2025 3:34 am » in General Discussion Forum

First post

slwa_b2600780_6.jpg

slwa_b2600780_5.jpg

Last post

What a great picture of an Aussie T. I like the water bag location

1 Replies

708 Views

Last post by Manuel
Wed Jul 09, 2025 10:34 pm
Hollywood H1 carburetor for sale.

Last post by Allan « Wed Jul 09, 2025 8:10 pm
Posted in Classifieds - Parts
Replies: 5
by Allan » Wed Jul 09, 2025 12:06 am » in Classifieds - Parts

First post

I ran this on my 1912 van for 25 years. The car got hard to crank start so I replaced it with Stan Howe rebuilt spare. It turned out that the hard starting was due to a shrunken cork float that was very loose on the hinge so the float level was all over th place.

It will need a new float. It may be better with a viton tip needle and seat, and a...

Last post

I completely overlooked that detail Layden. Thankyou for pointing it out.

Allan from down under.

5 Replies

407 Views

Last post by Allan
Wed Jul 09, 2025 8:10 pm
Rims out of true by 1/8 of an inch

Last post by Allan « Wed Jul 09, 2025 8:08 pm
Posted in General Discussion Forum
Replies: 25
by Mustang1964s » Mon Jul 07, 2025 9:03 am » in General Discussion Forum

First post

The Title says it all.
I am working on getting the steering in shape. Was about to check the toe in and found out that both the front rims are about or just under 1/8 inch our of true.
Should I be concerned about this?
I don't see how to get the rims trued and at lost how to fix it.

Thank you in advance.

Last post

You can take any kingpin wear out of the equation by driving a wooden wedge between the spindle body and the yoke in the axle. Then you can get a real feel for any play in the bearings. I like to feel a smidgeon of play. That way I know the bearings are not binding. Then you have things set up to measure just the runout in the wheel/rim/tyre...

25 Replies

550 Views

Last post by Allan
Wed Jul 09, 2025 8:08 pm
Clogged 21 inch valve stem

Last post by Allan « Wed Jul 09, 2025 7:57 pm
Posted in General Discussion Forum
Replies: 10
by Tim Hansen » Tue Jul 01, 2025 7:46 pm » in General Discussion Forum

First post

I have a tire issue I never ran into before. I have a good 21 inch tire that was low in air. I pumped it up to 35 Lbs and all was fine. I then checked the pressure with a tire gauge and the gauge read 0 PSI. I checked and no air will come out or go in. Same when I removed the valve from the tube. Tire is aired up but no air will go in or come out....

Last post

The tube shifting in the tyre happens when the tyre is underinflated. The valve stem hole in the rim and the same in the felloe will tend to hold the valve stem vertical, so when the tube wants to shift it will tend to tear away from the stem. The same can happen with metal stem tubes. The correct tyre pressure is the answer.

On a 21 flat based...

10 Replies

552 Views

Last post by Allan
Wed Jul 09, 2025 7:57 pm
Re: Put in Bay trip Ohio

Last post by love2T's « Wed Jul 09, 2025 7:39 pm
Posted in General Discussion Forum
Replies: 2
by Joe Bell » Mon Jul 07, 2025 9:21 pm » in General Discussion Forum

First post

The time is getting closer for Miller Ferry and the Yacht club to know who is coming this Sunday for T day on the island, if you have never been there they treat you very well on the island for refreshments before the parade and a lunch after. Line up is by 9:30 for the 10:00 boat. I do not plan on doing this next year so this may be your last...

Last post

We have tickets for the ferry. Do we need to notify the Yacht club specifically that we’re coming?

NO!

2 Replies

232 Views

Last post by love2T's
Wed Jul 09, 2025 7:39 pm
1910 Touring

Last post by Michael Peternell « Wed Jul 09, 2025 7:31 pm
Posted in Classifieds - Vehicles
Replies: 4
by ModelT46 » Wed Jul 02, 2025 12:29 pm » in Classifieds - Vehicles

First post

I have owned 1910 T number 24146 since Sept, 1946. It is a good carand mostly complete or the 1910parts needed go with it. If I do selll it, it has to go to a local person who will take good care of it. When an local person looks at it, I them will quote a price, but only to someone who will keep it. If I do not find the right person, I will keep...

Last post

I'll give you a call tomorrow!

4 Replies

1402 Views

Last post by Michael Peternell
Wed Jul 09, 2025 7:31 pm
Fender repair advice

Last post by varmint « Wed Jul 09, 2025 5:45 pm
Posted in General Discussion Forum
Replies: 11
by TheSaintDiscJockey » Wed Jul 09, 2025 8:51 am » in General Discussion Forum

First post

I am sure a common front fender problem. A tear as seen in the pics. I had the same issue with a previous roadster.
I paid a fortune to repair, only to have the repair begin to crack. The fender was repaired while it was off the car.
I think the stress of reinstalling may have weakened the repair.
I'm thinking to repair this fender while still on...

Last post

When I repaired our fenders, i replaced the wire and put a bead undernaeth the cracks. Saw my uncle do that on a VW Beetle. The insurance man said that after an accident that it needed a bead to reinforce the area. He said that too soon, as the bead was already there.

11 Replies

360 Views

Last post by varmint
Wed Jul 09, 2025 5:45 pm
Hundredth Anniversary Ford Coca-Cola bottles.

Last post by Unprr « Wed Jul 09, 2025 4:07 pm
Posted in Classifieds - Parts
Replies: 7
by Unprr » Mon Jun 30, 2025 2:43 pm » in Classifieds - Parts

First post

I have a have 6 pack of the hundredth anniversary Ford Coca-Cola bottles, in Curtain, for sale. It is in pristine condition and from a smoke free home.
I am asking $20 per six pack, plus shipping to the lower 48 states.

Last post

Steve, thanks for your purchase. If you need any more, let me know.

George

7 Replies

651 Views

Last post by Unprr
Wed Jul 09, 2025 4:07 pm
SOLD. 1909-1912 Brass Windshield Frame

Last post by ShaneKerry « Wed Jul 09, 2025 4:01 pm
Posted in Classifieds - Parts
Replies: 3
by ShaneKerry » Tue Jul 01, 2025 11:54 am » in Classifieds - Parts

First post

IMG_6369.jpeg IMG_6371.jpeg
SOLD.
1909 - 1912 Brass Windshield Frame Complete with glass setting Channel, came from
Snyders T-40300, it is still wrapped in original packaging. $350 plus shipping. Call
With any questions. (740-501-5888)

Last post

Hi Richard, Brass Windshield Frame shipped, should receive by 7/15.

3 Replies

609 Views

Last post by ShaneKerry
Wed Jul 09, 2025 4:01 pm
Bought my First T

Last post by Steve Jelf « Wed Jul 09, 2025 2:59 pm
Posted in General Discussion Forum
Replies: 23
by mikefr24 » Sat Jul 05, 2025 3:00 pm » in General Discussion Forum

First post

Hi Everyone. I have been wanting a Model T for a long time and finally got one. I picked up a 1917 Touring that has been converted to a pickup with the Ford metal pickup bed. It's a project and not restored (what I wanted so I can learn about it). It also needs upholstery work and its missing the wood backrest frame for the seat. Its pretty...

Last post

This page about cooling and flushing may help:

These videos show flushing:

23 Replies

821 Views

Last post by Steve Jelf
Wed Jul 09, 2025 2:59 pm
Early KW Coil Points

Last post by Jerry VanOoteghem « Wed Jul 09, 2025 1:02 pm
Posted in General Discussion Forum
Replies: 6
by Original Smith » Sun Jul 06, 2025 6:50 pm » in General Discussion Forum

First post

I'm adjusting the coil points for a 1913 KW Coil. The points that are on the coil are the ones that Randall (RIP) Anderson had made about 10 years ago.
On the upper, top point. the cushion spring is way greater than it should be. I just checked a NOS late Ford script coil point, and that setting is .009 .
I'm thinking of gently smacking the rivet...

Last post

I sent two of those otherwise great shape coils to someone in the mid-west to rebuild.

When I asked about them two years later, I was told they needed new points and none were available.

Evidently there are still no points available!

When I restored my Model N, I used the original Heinze coils. They all needed new points. I think RV may made...

6 Replies

352 Views

Last post by Jerry VanOoteghem
Wed Jul 09, 2025 1:02 pm
FOR SALE...TRANSMISSION DRUM SET 1926-27

Last post by Jack Putnam, in Ohio « Wed Jul 09, 2025 12:38 pm
Posted in Classifieds - Parts
Replies: 1
by Jack Putnam, in Ohio » Thu Jun 19, 2025 8:44 pm » in Classifieds - Parts

First post

Set of 3 transmission drums for model Ts 1926 and 1927. These drums have been cleaned, checked for cracks by magna flux and have been precision ground and polished. The gears are excellent and tight. Brake drum uses replaceable shoes. Original bushings are on place and could be used without replacement. This is a great set of original Ford...

Last post

Reduced price to $600 for the set. Other drums individual drums available.

1 Replies

820 Views

Last post by Jack Putnam, in Ohio
Wed Jul 09, 2025 12:38 pm
Side Curtains for Touring Car (1915-22) For Sale

Last post by Linus Tremaine « Wed Jul 09, 2025 12:29 pm
Posted in Classifieds - Parts
Replies: 4
by James_Lyons-WV » Tue Jul 08, 2025 3:19 pm » in Classifieds - Parts

First post

I have a set of Cartouche Side curtains for sale that will fit a 1915 through 1922 Touring car. The eyelets are brass for 15/16 as opposed to nickel for later years, but they can be changed out if you so desire. This set is about 20 years old but in excellent shape and still very soft and pliable. The windows are perfect. You may need to move your...

Last post

I dont even have a car they would fit and I am tempted to buy them at the asking price.

4 Replies

284 Views

Last post by Linus Tremaine
Wed Jul 09, 2025 12:29 pm
Race Car Project

Last post by TXGOAT2 « Wed Jul 09, 2025 12:06 pm
Posted in General Discussion Forum
Replies: 82
by John Warren » Sun Jan 06, 2019 6:08 pm » in General Discussion Forum

First post

i phone 5-5-16 1726.jpg

This is how it all started!

Last post

Things really flow in my kitchen area since we replaced the old flooring with wombats.

82 Replies

70440 Views

Last post by TXGOAT2
Wed Jul 09, 2025 12:06 pm
FS *Newly rebuilt 6v starter*

Last post by AdminJeff « Wed Jul 09, 2025 11:23 am
Posted in Classifieds - Parts
Replies: 4
by AdminJeff » Sat Jul 05, 2025 11:30 am » in Classifieds - Parts

First post

Best Possible quality rebuild.
PRICE DROP! $325!!

Now that I make literally every part in these units except the housing and the armatures, I can pass some savings on to everyone.

I have ONE 6v starter for sale that I just finished putting together yesterday.

New field coils with silver soldered post (yes, I now make these)
Bronze bushing...

Last post

Chris, you're too kind! Glad you enjoy the parts. It's a labor of love, as you well know!

Jeff

4 Replies

439 Views

Last post by AdminJeff
Wed Jul 09, 2025 11:23 am
Does anyone have any wheels or rims that would be for a 1909 REO Touring car

Last post by George House « Wed Jul 09, 2025 10:20 am
Posted in General Discussion Forum
Replies: 2
by Herb Iffrig » Wed Jul 09, 2025 8:53 am » in General Discussion Forum

First post

I am looking for replacing some bad wheels on a 1909 REO touring car. If you would know of any parts please advise. The hubs seem to be ok.
Thanks

Last post

No I don’t Herb. But I have 3 running board brackets that came off a 10-11 REO if you need them…

2 Replies

129 Views

Last post by George House
Wed Jul 09, 2025 10:20 am
WTB - SMALL DRUM REAR AXLE- Found, thank you.

Last post by Sarikatime « Wed Jul 09, 2025 9:53 am
Posted in Classifieds - Parts
Replies: 3
by Sarikatime » Mon Jun 30, 2025 9:32 am » in Classifieds - Parts

First post

Want to buy a small drum standard rear axle for my model T.
Frank. Eight one eight two five four six seven nine seven.

Last post

Still looking. Anyone in the Arizona vicinity?

3 Replies

423 Views

Last post by Sarikatime
Wed Jul 09, 2025 9:53 am
1915 hood former $150 great shape.

Last post by modeltworks « Wed Jul 09, 2025 9:17 am
Posted in Classifieds - Parts
Replies: 1
by modeltworks » Sun Jul 06, 2025 4:58 pm » in Classifieds - Parts

First post

1915 hood former great shape. $150 plus shipping.

Last post

Back to top

1 Replies

294 Views

Last post by modeltworks
Wed Jul 09, 2025 9:17 am
Long Beach swap meet

Last post by Dan Hatch « Wed Jul 09, 2025 8:20 am
Posted in General Discussion Forum
Replies: 2
by AdminJeff » Tue Jul 08, 2025 11:27 pm » in General Discussion Forum

First post

Anyone from Idaho going to the Long Beach Swapmeet July 19th ?

I have some parts I need to get to and from another member.

AdminJeff

Last post

In the front pages of club magazine.

2 Replies

116 Views

Last post by Dan Hatch
Wed Jul 09, 2025 8:20 am
1922 Center Door for sale

Last post by pgbaresel « Wed Jul 09, 2025 7:36 am
Posted in Classifieds - Vehicles
Replies: 1
by alykey » Fri May 16, 2025 2:01 pm » in Classifieds - Vehicles

First post

A real time capsule - this car has been in my warehouse up on jack stands since 1963---

unadulterated - no broken glass interior is untouched .....asking $10,000.00 Price Negotiable

Last post

Good morning,
Is the engine frozen or does it turn over? Thanks

1 Replies

2263 Views

Last post by pgbaresel
Wed Jul 09, 2025 7:36 am
For Sale: 1914/15 Canadian Touring

Last post by jethro « Tue Jul 08, 2025 9:41 pm
Posted in Classifieds - Vehicles
Replies: 1
by jethro » Wed Jul 02, 2025 9:52 pm » in Classifieds - Vehicles

First post

For Sale: 1914/15 Canadian Touring
This is a 1914/15 Canadian touring. I bought this car in Detroit between 2001-2003 when I lived in Detroit. Reasonably complete car. Had engine fitted with Bu-Mac counter balanced crankshaft by Ron Miller of Ron's Machine shop in Shandon, Ohio. He did the mains, rods, and transmission as well as fixed a crack in...

Last post

Back to the top.
Get a car and a rebuilt motor for about the price of a car. Or make me a reasonable offer.
R/S,
Jonathan Bodine
406 498 3946 or send an email through this website.

1 Replies

666 Views

Last post by jethro
Tue Jul 08, 2025 9:41 pm
1914 T Touring For Sale

Last post by 12chalmers « Tue Jul 08, 2025 8:42 pm
Posted in Classifieds - Vehicles
Replies: 10
by 12chalmers » Mon Feb 24, 2025 9:06 pm » in Classifieds - Vehicles

First post

For Sale 1914 Ford T Touring. Original car restored in 1964. Chassis Re Restored by Bill Bennett. A year old Kazorki motor rebuild with balanced crank, aluminum pistons and stipe cam. New gas tank, Recored Brass works radiator, New rocky mountain brakes, Ruxtell rebuilt. a later pan and hogs head with starter added. New tires and tubes and...

Last post

No longer available.

10 Replies

7843 Views

Last post by 12chalmers
Tue Jul 08, 2025 8:42 pm
1909 Water Pump Engine Questions......

Last post by VowellArt « Tue Jul 08, 2025 2:31 pm
Posted in General Discussion Forum
Replies: 17
by VowellArt » Sun Jun 22, 2025 5:44 pm » in General Discussion Forum

First post

1909EarlyWaterPumpEngineAssembly.jpg

Been working on a project that is both rare and not much known (intimately) by most of the Model T world (with the exception of a few).

The 1909 Water Pump Engine! The first 2500 or so cars had this configuration which changed somewhere around 1911, to Thermosyphon )which the drawing I have shows), I have...

Last post

Thanks Kim!

Here's my work in progress....still need to add the springs, retainers and pins....but the more I look at this and the further I go, I am starting to see that I'm going to have to add a few things I hadn't planed on (cross sections of a valve line....the relationship of the valve to guide position in block, to spring, retainer, pin,...

17 Replies

1379 Views

Last post by VowellArt
Tue Jul 08, 2025 2:31 pm
Model T Speedster

Last post by Kenny Edmondson « Tue Jul 08, 2025 12:45 pm
Posted in Classifieds - Vehicles

by Kenny Edmondson » Tue Jul 08, 2025 12:45 pm » in Classifieds - Vehicles

I’m helping an Indianapolis area gentleman sell his Hill Climb Speedster. Don is an accomplished machinist and everything he built for this car was to keep it as light weight as possible. It’s built for the Newport Hill Climb in Newport Indiana. He said it weights around 800 lbs. I’m sure it could be converted for other uses as well.

He recently...

0 Replies

282 Views

Last post by Kenny Edmondson
Tue Jul 08, 2025 12:45 pm
Speedo cable length

Last post by Will_Vanderburg « Tue Jul 08, 2025 12:26 pm
Posted in General Discussion Forum
Replies: 6
by Will_Vanderburg » Mon Jul 07, 2025 5:28 pm » in General Discussion Forum

First post

Does anyone know the length of the speedometer cable for a 22 sedan. I have one that’s 50 inches and suspect thats not long enough.

Last post

Thanks much!

6 Replies

195 Views

Last post by Will_Vanderburg
Tue Jul 08, 2025 12:26 pm
Good Used Front Outer Wheel Bearings

Last post by RajoRacer « Tue Jul 08, 2025 12:02 pm
Posted in Classifieds - Parts
Replies: 6
by RajoRacer » Sun Sep 08, 2024 2:04 pm » in Classifieds - Parts

First post

Cleaning out some coffee cans and have multiple matched sets of the threaded Timken's available - clean & ready to grease - photos coming soon - $100 pair includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Last post

BTT - price reduction to $75 a set - drop me a note through the Forum, please.

6 Replies

1923 Views

Last post by RajoRacer
Tue Jul 08, 2025 12:02 pm
1915 Ford Model "T" Touring

Last post by amandasfowler « Tue Jul 08, 2025 11:46 am
Posted in Classifieds - Vehicles
Replies: 4
by amandasfowler » Wed May 28, 2025 11:16 am » in Classifieds - Vehicles

First post

1915 Ford Model T Touring

Beautiful early Ford touring car in diamond gloss black as Henry Ford wanted it.

Completely restored (older restoration) ready for all outings, tours & shows.

* Engine completely gone through and resealed
*Electric starter installed
*Rebuilt magnetos
*12V electric system with charger
*Complete Rocky Mountain brake...

Last post

Price improvement. :) :)

4 Replies

2582 Views

Last post by amandasfowler
Tue Jul 08, 2025 11:46 am
Where to harness the power of vacuum?

Last post by WillyR « Tue Jul 08, 2025 11:27 am
Posted in General Discussion Forum
Replies: 13
by WillyR » Tue Jul 01, 2025 12:39 am » in General Discussion Forum

First post

Where would be the best place to access engine vacuum?

I have a spare intake heat exchanger and was wondering if I could harness enough vacuum just ahead of the carburetor.

The only other place I can think of is on the intake manifold, but that would be post carb and would possibly interfere with combustion/fuel/air mixture etc…

I actually...

Last post

I ended up putting a 90* on the backside of the intake.

It's not visible except for the vacuum hose, if I were to plug it, at the 90 or with the 90 removed. it would not be visible at all.

13 Replies

729 Views

Last post by WillyR
Tue Jul 08, 2025 11:27 am
Dodged a bullet….

Last post by Humblej « Tue Jul 08, 2025 10:57 am
Posted in General Discussion Forum
Replies: 5
by 1915ford » Mon Jul 07, 2025 9:52 pm » in General Discussion Forum

First post

Was out in the fifteen last week and just as i am pulling back into the garage the low pedal got weird. Then i heard the tell tale sound of a fastener bouncing around inside the oil pan. Pulled the inspection cover and three of the six backing plate bolts were sitting in the filter. I had been in the habit of using loctite on them and no safety...

Last post

Eagads, loctite instead of safety wire?!

5 Replies

433 Views

Last post by Humblej
Tue Jul 08, 2025 10:57 am
Hell Locate a young man building a speedster.

Last post by flatbroke3 « Tue Jul 08, 2025 10:17 am
Posted in General Discussion Forum
Replies: 2
by frontyboy » Tue Jul 08, 2025 12:57 am » in General Discussion Forum

First post

A while back there was a post about a young man building a speedster from the ground up piece by piece. Think his father actually wrote the post.

I am wondering about how the progress is coming ,have not seen any updates. I looked for the original post but could not locate it.

frontyboy

Last post

maybe this is what you are looking for?

2 Replies

332 Views

Last post by flatbroke3
Tue Jul 08, 2025 10:17 am
How to Add an Avatar Photo

Last post by TXGOAT2 « Tue Jul 08, 2025 9:44 am
Posted in General Discussion Forum
Replies: 114
by RustyFords » Sun Jan 06, 2019 12:07 pm » in General Discussion Forum
1

2
First post

If you'd like to add an avatar photo to your information block to the right, here's how you do it.

Once you've successfully registered and are logged on, look at the upper right hand corner of the screen and do the following things:

Before you get started though....please know....you'll need a REALLY small file size to do this (21 kB or less...

Last post

The new, highly-polished marble flooring really sets off the rich Corinthian lather in the rear compartment and sauna area while providing faster acceleration and higher top speeds. Act now for hot summer pricing!
114 Replies

221943 Views

Last post by TXGOAT2
Tue Jul 08, 2025 9:44 am
30 years ago today...

Last post by frontyboy « Tue Jul 08, 2025 12:46 am
Posted in General Discussion Forum
Replies: 9
by KWTownsend » Tue Jul 01, 2025 2:25 pm » in General Discussion Forum

First post

She said, I do.
K&Y wedding3.JPG
We still have the car, too!

Last post

Spent the day touring with the love birds, July 5th. It was amazing to see the both of them sitting side by side enjoying their time together with their model t friends. You could tell just being around them they are still the young couple in love.

just sayin'

frontyboy

9 Replies

1042 Views

Last post by frontyboy
Tue Jul 08, 2025 12:46 am
Barely leaking radiator core issue

Last post by Dennis Prince « Mon Jul 07, 2025 11:40 pm
Posted in General Discussion Forum
Replies: 10
by John kuehn » Fri Jul 04, 2025 7:33 pm » in General Discussion Forum

First post

I was looking at my 21 Touring today and noticed the replacement flat tube radiator has a couple of damp spots on it and very small leaks. These are very slow and not dripping. The radiator was a flat tube recore bought on eBay years ago when I was assembling parts to build the 21. I haven’t use any radiator stop leak in any of my cars for years....

Last post

An old radiator man told me to use ground ginger, I have used it on many vehicles and it always works. Those seal tabs that come with a new GM water pump are ground ginger, I some times find it at the Dollar Store, I use about 1/2 a jar (about 3 1/2 in tall) for a T. Put it in a hot engine and dissolve it in a cup of hot water before adding and...

10 Replies

467 Views

Last post by Dennis Prince
Mon Jul 07, 2025 11:40 pm
Brass Phinney-Walker clock Spoken for!

Last post by Layden Butler « Mon Jul 07, 2025 11:26 pm
Posted in Classifieds - Parts
Replies: 2
by Layden Butler » Mon Jul 07, 2025 6:58 pm » in Classifieds - Parts

First post

All brass Phinney-Walker keyless ( rim wind and rim set) clock, winds runs and sets properly, no dents cracks or chips, 2 1/2 diameter face, $125 includes domestic 48 state shipping. Please respond using MTFCA messaging system.

Last post

Clock is spoken for.

2 Replies

228 Views

Last post by Layden Butler
Mon Jul 07, 2025 11:26 pm
Hand klaxon question

Last post by LittleTimmy52 « Mon Jul 07, 2025 11:17 pm
Posted in General Discussion Forum
Replies: 3
by LittleTimmy52 » Mon Jul 07, 2025 5:44 pm » in General Discussion Forum

First post

So I just got a cheap horn I can afford, it's most likely not the one my car had, I think it had the bras bulb one because the imprint on where it mounts is the same little square I've seen on the mounts for the bulb horn, anyways the 2 rear screws, one on the bracket one on the back and unscrewed a bit for the unscrewed one is this an adjustment...

Last post

I see what you mean, might it be better then to make an adapter bracket that basically does a 90 degree turn to put 3 bolt holes on the top but still use the side mount?

3 Replies

170 Views

Last post by LittleTimmy52
Mon Jul 07, 2025 11:17 pm
National Motor Camp

Last post by Dennis Prince « Mon Jul 07, 2025 10:09 pm
Posted in General Discussion Forum
Replies: 11
by Dennis Prince » Sun Feb 02, 2025 12:25 am » in General Discussion Forum

First post

Is anyone going to the National Motor Camp at South Lake Tahoe in July? I am going to be there and hope to meet a bunch of new friends. Dennis IMG_0874.JPG

Last post

Sounds like luck wasn't enough, I just heard that Patrick broke his crank and they both decided to call it quits, sorry to hear that.

11 Replies

4708 Views

Last post by Dennis Prince
Mon Jul 07, 2025 10:09 pm
1927 running gear

Last post by 26-Roadster/pu « Mon Jul 07, 2025 10:02 pm
Posted in Classifieds - Parts
Replies: 2
by 26-Roadster/pu » Mon Jun 02, 2025 12:08 am » in Classifieds - Parts

First post

I have a nice 1927 running gear. Engine/transmission, radiator, steering column, wire wheels. $3,000 OBO I have many other parts available also.

Last post

Yes it is available. Thanks

2 Replies

1221 Views

Last post by 26-Roadster/pu
Mon Jul 07, 2025 10:02 pm
Need some help in Auburn, Nebraska

Last post by Tmooreheadf « Mon Jul 07, 2025 9:13 pm
Posted in General Discussion Forum
Replies: 1
by Tmooreheadf » Mon Jul 07, 2025 6:26 pm » in General Discussion Forum

First post

If anyone lives near Auburn, Nebraska, Patrick Goodman is on his way to California to a national camping event in his T. He has had a major engine failure and needs some assistance. If you are in that area, and can help, please call Patrick at 270-404-1692. Or you can call me at 502-553-9592. I'm at home in KY and am the rescue driver if something...

Last post

Thanks for the offers. We will retrieve the car and trailer tomorrow and bring it home to KY!

1 Replies

181 Views

Last post by Tmooreheadf
Mon Jul 07, 2025 9:13 pm
WTB Kelsey outer rim

Last post by Allan « Mon Jul 07, 2025 8:22 pm
Posted in Classifieds - Parts
Replies: 1
by Larry LaPatka » Mon Jul 07, 2025 7:58 pm » in Classifieds - Parts

First post

Need a Kelsey outer rim that uses 30 x 3 1/2 tires
And takes the stud bolts holding clips and nuts.
The outer rim has one tab near the valve stem and has the ridge going completely around the outer edge with 4 slits the hold the 4 clips that grip the fellow of the inner wheel. Using for a spare tire.
Thank You MTFCA
LARRY
EMAIL: ltlapatka@gmail.com

Last post

Larry, a second type has a shoulder around the inside diameter of the rim. This shoulder wedges on the outer felloe edge. This type does not have the slits that let water into the rim/tyre assembly. The U shaped clip grip on the shoulder, rather than a cut out. They are interchangeable on the correct wheels. I have found Kelsey branded rims of...

1 Replies

122 Views

Last post by Allan
Mon Jul 07, 2025 8:22 pm
Who has flaps for sale

Last post by Allan « Mon Jul 07, 2025 8:08 pm
Posted in General Discussion Forum
Replies: 25
by Oldav8tor » Thu Jul 03, 2025 3:17 pm » in General Discussion Forum

First post

I ordered two 23 x 4.5 inch flaps from Universal /Coker recently for my 30 x 3.5 inch tires and was told that they would not be available for probably six months or more. Does anyone know of someone who has flaps available or expects to get them sooner?

Last post

Dan's photo of the old time flap is revealing. Even this tough old fibre reinforced flap and the tube, have clearly been driven down to the rim base. It also shows that it is unnecessary to notch the bead to fit the valve stem.

Allan from down under.

25 Replies

892 Views

Last post by Allan
Mon Jul 07, 2025 8:08 pm
1926/7 Coupe door latch Question

Last post by varmint « Mon Jul 07, 2025 5:29 pm
Posted in General Discussion Forum
Replies: 11
by varmint » Tue May 27, 2025 10:16 pm » in General Discussion Forum

First post

Umm, how do they go back together. Mine is disassembled and I cannot find photos of when I took it apart.
Photos and orientation of parts, especially the small parts would be great. I did search the forum and found write-up but no pics.
Mine was missing good springs and some were in pieces. I have a rebuild kit for both.
Thanks

Last post

After days of playing with it, I answered my own question. The passenger latch does not lock from the inside as they purposefully cut and bent a tab down to prevent the lever from being pulled back (no position 3 for right side).
Also, if you were to lock the door with a key from the outside, it can not be unlocked from the inside.
The knob is 1/4...

11 Replies

1580 Views

Last post by varmint
Mon Jul 07, 2025 5:29 pm
Chicago Mark-E Aux Transmission

Last post by Bryant « Mon Jul 07, 2025 2:51 pm
Posted in General Discussion Forum
Replies: 17
by Bryant » Tue Jul 01, 2025 7:05 pm » in General Discussion Forum

First post

Looking for information pertaining to the Chicago Mark-E Auxiliary transmission.
What I am looking for
Literature on installation
Original sales ads and the like
Part sources, part numbers
Rebuild specifications/tolerances
Information on manufacturing dates
Information on the round disk with the grease zerk pictured below.
And any other...

Last post

53D51662-694A-4BCB-A372-374510D8EA84.jpeg main input shaft. Zoom in for details! she has seen better days. Sad but true this hobby sometimes.
Looking for one in the classifieds but also talked to a friend of mine that’s a retired machinist.
He said “ I can make that”

A glimpse of hope
Bryant

17 Replies

681 Views

Last post by Bryant
Mon Jul 07, 2025 2:51 pm
WTB Chicago Aux transmission Parts

Last post by Bryant « Mon Jul 07, 2025 2:44 pm
Posted in Classifieds - Parts
Replies: 2
by Bryant » Wed Jul 02, 2025 7:41 pm » in Classifieds - Parts

First post

Looking for parts for the Chicago mark-e auxiliary transmission.
Shift knob
shim gaskets
Internals (what do you have?)
Frame to transmission support
Bryant

Last post

D371BE8C-07D2-43E7-B08D-906BEDA4D44B.jpeg looking for this main input shaft. :shock:

2 Replies

419 Views

Last post by Bryant
Mon Jul 07, 2025 2:44 pm
Model T's & the Kansas City Southern Railroad

Last post by Mark Gregush « Mon Jul 07, 2025 12:59 pm
Posted in General Discussion Forum
Replies: 8
by sjgi48 » Fri May 09, 2025 5:18 pm » in General Discussion Forum

First post

I recently acquired a large group of ancient (1910's to 1930's) negatives from the Kansas City Southern Railroad. These were once part of the railroad's files and are generally photos of railroad structures and the like. The Ford Model T manages to show up in some of the photos, so I thought I would share them here.

Jason Midyette

Last post

Over to the left, first photo, like the bike in the back of the truck. Maybe belong to the kid running messages from the telegraph office.

8 Replies

1999 Views

Last post by Mark Gregush
Mon Jul 07, 2025 12:59 pm
Painting springs

Last post by Mark Gregush « Mon Jul 07, 2025 12:52 pm
Posted in General Discussion Forum
Replies: 18
by Reno Speedster » Thu Jul 03, 2025 11:20 pm » in General Discussion Forum

First post

I have cleaned up the rear springs and need to paint them. I can’t find any graphite paint up here in Alaska and it would be expensive to ship some up as it is hazmat. What would be a good alternative choice of paint?

Last post

The graphite/enamel/mineral spirits mix does harden and provides great slickness between the leafs. After applying, assemble the leafs together and tighten, then clean off any mix on the outside edges, tops and bottoms of the assembled springs with mineral spirits and paint with a gloss black paint of your choice. I brush painted mine with gloss...

18 Replies

792 Views

Last post by Mark Gregush
Mon Jul 07, 2025 12:52 pm
Steep hills

Last post by Oldav8tor « Mon Jul 07, 2025 12:39 pm
Posted in General Discussion Forum
Replies: 26
by ewdysar » Sun Jul 06, 2025 3:13 pm » in General Discussion Forum

First post

Yesterday, I went on a HCCA tour with my ‘14 touring that had more hills than I expected, and while I had plenty of fuel to cover the distance, there were a number of long, steep hills that caused some issues. The first long hill resulted in a couple of surges as the carb almost went dry, but then the road pitched to slightly less steep and the...

Last post

While I loved the Holley G that came with my '17 I learned it had some drawbacks. When compared to a NH, the NH actually produces more power. Add to that the Scott Conger Full-flow valve and most of the problems you described are eliminated. FWIW, we did a side by side dyno test of a Holley G and a NH on the same engine with the attached results....

26 Replies

548 Views

Last post by Oldav8tor
Mon Jul 07, 2025 12:39 pm
FS model T headlights

Last post by fordrelic « Mon Jul 07, 2025 11:29 am
Posted in Classifieds - Parts

by fordrelic » Mon Jul 07, 2025 11:29 am » in Classifieds - Parts

For Sale: Two model T headlights.

$50 for pair, plus shipping

0 Replies

307 Views

Last post by fordrelic
Mon Jul 07, 2025 11:29 am
FS - 2 TT tubes, 33 x 5

Last post by TheSaintDiscJockey « Mon Jul 07, 2025 11:25 am
Posted in Classifieds - Parts
Replies: 6
by TheSaintDiscJockey » Sat Jun 28, 2025 4:26 pm » in Classifieds - Parts

First post

2 tubes that were on my TT up until last week.
Hold air with no issues.
Brass stems and hardware.
$30.00 for the pair, plus postage. Pm please. Many thanks. Marked ANT USA.

Last post

To the top please

6 Replies

550 Views

Last post by TheSaintDiscJockey
Mon Jul 07, 2025 11:25 am
What Has Your Chapter Done in 2025?

Last post by South Park Zephyr « Mon Jul 07, 2025 9:00 am
Posted in General Discussion Forum
Replies: 60
by AndyClary » Sat Jan 04, 2025 12:46 pm » in General Discussion Forum

First post

I’m going to try a chapter thread this year. We need to remember this is a club site and chapter activities are important. By sharing what we do maybe other chapters can get some fresh ideas.

So, we meet the first Thursday of the month. Since it was January 2nd it was lightly attended. We had 18 people where we usually have in the 25-30 range....

Last post

Great pics, John

Sorry I wasn’t able to attend

Scott

60 Replies

21585 Views

Last post by South Park Zephyr
Mon Jul 07, 2025 9:00 am
NH Carb question

Last post by Moxie26 « Mon Jul 07, 2025 7:24 am
Posted in General Discussion Forum
Replies: 18
by Blairgr » Fri Jul 04, 2025 7:15 am » in General Discussion Forum

First post

Hi Folks, it has been a while since I posted on here. A friend passed away and his son has asked me to help get there 22 Runabout going. It has been setting for several years, and I took the carb apart to clean it out. The float level was extremely high when I got it apart and I am not sure what the issue is. I would guess it is the needle and...

Last post

Sounds like good progress.. as far as the initial mixture, a turn and a half to two turns would be okay for starting, but you'll find that once the engine warms up the mixture would have to be leaned out to run better..... Besides flushing out that old gas, you may want to check the sediment bowl screen for crud restricting flow and also the pipe...

18 Replies

796 Views

Last post by Moxie26
Mon Jul 07, 2025 7:24 am
OHV question - oil pressure to rocker arms?

Last post by Mark Herdman « Mon Jul 07, 2025 2:41 am
Posted in General Discussion Forum
Replies: 4
by ewdysar » Fri May 23, 2025 9:28 pm » in General Discussion Forum

First post

OK, I am used to running with the oil-soaked felt pad in the valve cover with my iron Rajo head, but as I am setting up my new (to me) iron Roof 8 head, I am considering routing some of the oil pressure up there. At the business end of things, I know that one runs pressure to a hollow rocker arm shaft, with an outlet at each rocker arm bushing....

Last post

Mine are pressurised via the rocker cover hold down stud. Stands are in steel and clamp onto the shaft so shafts can be used for oil ways.

4.jpg

4 Replies

905 Views

Last post by Mark Herdman
Mon Jul 07, 2025 2:41 am
For you Rajo guys, saw this on Tbay would this really fit a T?

Last post by Mark Herdman « Mon Jul 07, 2025 1:51 am
Posted in General Discussion Forum
Replies: 6
by JTT3 » Sat Jul 05, 2025 11:39 pm » in General Discussion Forum

First post

I have no connection to the part or seller but was curious about the number of intake ports & wondered how this would adapt to a T. Did Rajo have a 3 port head assembly for a T? Best John

Last post

I have one spare but it's in Australia.

20250512_103255.jpg

20250512_103307.jpg

20250512_103312.jpg

20250512_103423.jpg

6 Replies

613 Views

Last post by Mark Herdman
Mon Jul 07, 2025 1:51 am

Search found 119 matches

Go to advanced search