MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 245 matches

Topics

Replies

Views

Last post

FS brass headlight burners, new day timers, 1911 hubcap, NOS coil box

Last post by Dollisdad « Sat Apr 01, 2023 4:34 pm
Posted in Classifieds - Parts
Replies: 4
by KimDobbins » Sat Apr 01, 2023 1:29 pm » in Classifieds - Parts

First post

Pairs of brass headlight burners, $75.00 per pair. Nice new day timers, $40.00 each. One 1911 brass hubcap, $50.00. NOS Ford script coil box,$ 125.00. kdmks At att.net. All plus shipping.

Last post

Email sent

4 Replies

119 Views

Last post by Dollisdad
Sat Apr 01, 2023 4:34 pm
NOS AIR

Last post by Dallas Landers « Sat Apr 01, 2023 4:31 pm
Posted in Classifieds - Parts
Replies: 7
by ThreePedalTapDancer » Sat Apr 01, 2023 1:57 pm » in Classifieds - Parts

First post

I have a limited quantity of 1920s era correct air for sale. I had an old tube that I removed from a petrified tire, and it was still full of air. The tire was stored since the late 20s. The tube unfortunately started to leak once removed, so I decided to run around and capture the vintage air in some small mason jars. It is a must for that...

Last post

My tire is only 2 lbs low. How much per lb ? I dont think I need a full jar.

7 Replies

135 Views

Last post by Dallas Landers
Sat Apr 01, 2023 4:31 pm
What is a "Ford Type" Solenoid?

Last post by TRDxB2 « Sat Apr 01, 2023 4:10 pm
Posted in General Discussion Forum
Replies: 2
by BLB27 » Sat Apr 01, 2023 3:14 pm » in General Discussion Forum

First post

In discussions regarding starter switches, there is mentioned of a Ford Type solenoid. Is that a particular solenoid that is preferred when using one in addition to the original floor switch? If so, how do they differ from other solenoids?

Last post

I believe the reference to a Ford solenoid was to the 3 pole configuration since a distributor lead was not necessary. 4 pole normally unused , but if necessary for a ballast resistor or distributor ignition coil (not really necessary)
There tractor styles look a bit period correct. Note if you read the instructions you carefully you'll see that...

2 Replies

61 Views

Last post by TRDxB2
Sat Apr 01, 2023 4:10 pm
The Time Machine

Last post by BUSHMIKE « Sat Apr 01, 2023 4:07 pm
Posted in General Discussion Forum
Replies: 62
by BUSHMIKE » Fri Mar 10, 2023 10:44 am » in General Discussion Forum

First post

We did a 1400 mile, 26hr turn & burn on the retrieval to my new to me 1926 TT. We aptly named it the Time Machine. The condition of the cab is nothing short of amazing! The previous owner scuff sanded and cleared the lower panel behind the drivers door and with that exception the paint is 100% Henry Ford original! Not a single bit of rust other...

Last post

We hit 40 deg today, so I had to take the TT for its initial spin around the drive and thats exactly what I did….spin and spin and spin and spin some more. Its gonna be a long wait unless I come up with some chains. It was fun anyway and it sure is running well.

62 Replies

2415 Views

Last post by BUSHMIKE
Sat Apr 01, 2023 4:07 pm
Ever wondered what the original paint looked like?

Last post by pron022020 « Sat Apr 01, 2023 3:54 pm
Posted in General Discussion Forum
Replies: 3
by Don ellis » Sat Apr 01, 2023 2:43 pm » in General Discussion Forum

First post

If you ever wondered what the factory paint looked like well here you go! These were found in the rafters in an attic where I have found a lot of NOS parts. Obviously original paint and never been bolted on.

Last post

This is an example for the next person who says that the cars weren't shiny off the assembly line!

3 Replies

90 Views

Last post by pron022020
Sat Apr 01, 2023 3:54 pm
Starving for fuel, can NOT figure it out!?

Last post by George Mills « Sat Apr 01, 2023 2:37 pm
Posted in General Discussion Forum
Replies: 22
by Turmoil » Fri Mar 31, 2023 7:31 pm » in General Discussion Forum

First post

Lets me start by saying I have done extensive research and also searches on this forum and many/many others with no luck. I'm reluctant to post as I love the challenge but I'm simply out of ideas.
I have a 1926 Fordor with a fresh 1925 engine. I have had it running for a few weeks. I'm running a NH carb. The engine starts and idols flawlessly....

Last post

Just because I have been there, done that...

You 'might' want to check the screen in the sediment bulb.

Same symptoms, years ago..everybody local baffled, until I had absolutely nothing else to check! Screwed off the front plate and...there it was! A thin 'Brillo pad' of decades of accumulated dust on the tank side of the screen! Soaked the...

22 Replies

468 Views

Last post by George Mills
Sat Apr 01, 2023 2:37 pm
Gravel or Highway

Last post by CatGuy « Sat Apr 01, 2023 2:32 pm
Posted in General Discussion Forum
Replies: 20
by CatGuy » Fri Mar 31, 2023 9:52 pm » in General Discussion Forum

First post

We are considering moving onto the country. There would be two ways to access the house. We could take 7 miles of gravel and a 55mph highway. The other way would be a divided highway at 65mph. I’m not sure I feel to comfortable with either option. How much highway driving do you all do? How safe is it? My car is a ‘26 Roadster.

Last post

Where do you live now? If you're talking about moving to the country I'd have to think that the traffic on both the paved and gravel roads would be less. I live on a gravel road about a mile and a half off a rural paved road. I'm two miles from a state highway along the Lake Huron shoreline and feel comfortable driving on it except on weekends...

20 Replies

416 Views

Last post by CatGuy
Sat Apr 01, 2023 2:32 pm
Kingston L

Last post by Mountainrider « Sat Apr 01, 2023 2:30 pm
Posted in Classifieds - Parts

by Mountainrider » Sat Apr 01, 2023 2:30 pm » in Classifieds - Parts

Kingston L for sale. I used it while my Holly G was getting rebuilt. T started and ran good with it. Just been sitting unused and unneeded for a while.
$200.00 TYD.

0 Replies

32 Views

Last post by Mountainrider
Sat Apr 01, 2023 2:30 pm
09-10 Kingston 5-Ball Carburetor

Last post by MNToys « Sat Apr 01, 2023 2:13 pm
Posted in Classifieds - Parts
Replies: 1
by MNToys » Fri Mar 31, 2023 9:14 pm » in Classifieds - Parts

First post

Nice original 5-Ball. ‘09-‘10 style. Complete and not seized. I have not removed the bowl. I assume it needs rebuilt. A DEAL at $850 including shipping to lower 48.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

1DC9B5D5-16EE-427C-9BFE-B3C85B5000EB.jpeg

A448F11C-17F6-4E7D-A743-4886178E2E36.jpeg

Last post

Sold! Thanks!

1 Replies

168 Views

Last post by MNToys
Sat Apr 01, 2023 2:13 pm
Tulare 2023 Just a Few Weeks Away!!!

Last post by 67pontiac « Sat Apr 01, 2023 2:08 pm
Posted in General Discussion Forum
Replies: 27
by 67pontiac » Mon Mar 20, 2023 6:30 pm » in General Discussion Forum

First post

Greetings All!! Get ready for a wonderful and rewarding Tulare Swap Meet at the Tulare County Fair Grounds on April 14-15 2023. Move-in day is April 13 from 9:00am to 6:00pm. This year we have a new and, (hopefully), permanent venue. After two years at the Agri-Center, we moved to the Fair Grounds. This will be a Pre-War ONLY event this year, much...

Last post

Tulare Space Assignments: Please be patient with us. Remember, this is a new venue and things are going to be a little different. That's not a bad thing. I'll be sending letters out on Monday or Tuesday next week. There will be a map enclosed about the exact location of the fairgrounds and the best routes of travel from both North and South. There...

27 Replies

1190 Views

Last post by 67pontiac
Sat Apr 01, 2023 2:08 pm
2024 Tour to Eastern Europe, Hungary

Last post by Sarikatime « Sat Apr 01, 2023 1:25 pm
Posted in General Discussion Forum
Replies: 23
by Sarikatime » Wed Feb 01, 2023 5:07 pm » in General Discussion Forum

First post

We are in the planning stages of putting together a model T tour in Eastern Europe, with the antique automobile and model T club of Hungary, and the caretakers of the Jozsef Galamb museum in September of 2024.
Gathering information to find out if anyone would be interested in a 15 day tour that includes Budapest and Vienna with your own model T....

Last post

Please read all the ads and replies. For additional questions, call Frank Seress @ 818-254-6797

23 Replies

2071 Views

Last post by Sarikatime
Sat Apr 01, 2023 1:25 pm
13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY

Last post by Dan Hatch « Sat Apr 01, 2023 1:14 pm
Posted in Classifieds - Parts
Replies: 64
by Dan Hatch » Thu Feb 16, 2023 1:57 pm » in Classifieds - Parts

First post

These are for the Pinion Bearing Bolts. Special size not available at hardware store.
Please use email address in picture, not PM

Taps are done! Sending out totals

I have some extra taps if you want one email me at address in pictures
I have had inquiries about making another run of these. If you are interested list it here or send me an...

Last post

Back to the top

64 Replies

3617 Views

Last post by Dan Hatch
Sat Apr 01, 2023 1:14 pm
New Rear Axle Truss Rods?

Last post by TRDxB2 « Sat Apr 01, 2023 1:04 pm
Posted in General Discussion Forum
Replies: 3
by Sean Butler » Sat Apr 01, 2023 11:47 am » in General Discussion Forum

First post

I recently saw an ad for truss rods for supporting earlier rear axle housings being newly produced but can't seem to find it again. Has anyone seen this and can point me toward it and/or who is making them?

Last post

Post on making the rear truss rod brackets etc

3 Replies

97 Views

Last post by TRDxB2
Sat Apr 01, 2023 1:04 pm
FJ - Some Humor To Brighten Your Day

Last post by Rich P. Bingham « Sat Apr 01, 2023 1:01 pm
Posted in OT - Off topic
Replies: 1641
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

13

14

15

16

17
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

Is a Morsel T the same thing as a Bitsa T ? - asking for a friend ;)
1641 Replies

373504 Views

Last post by Rich P. Bingham
Sat Apr 01, 2023 1:01 pm
This was trucking-Old Photos

Last post by Herb Iffrig « Sat Apr 01, 2023 12:50 pm
Posted in OT - Off topic
Replies: 1243
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

9

10

11

12

13
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

bach.JPG
1243 Replies

269876 Views

Last post by Herb Iffrig
Sat Apr 01, 2023 12:50 pm
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by Herb Iffrig « Sat Apr 01, 2023 12:47 pm
Posted in OT - Off topic
Replies: 3887
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

35

36

37

38

39
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

barrister cigars.JPG

the guy on the left has been smoking them longer than the other guy. it has stunted his growth1
3887 Replies

702048 Views

Last post by Herb Iffrig
Sat Apr 01, 2023 12:47 pm
FS: Rare Fatman Steering Column

Last post by WaltM « Sat Apr 01, 2023 12:07 pm
Posted in Classifieds - Parts
Replies: 2
by WaltM » Sat Apr 01, 2023 10:06 am » in Classifieds - Parts

First post

For Sale RARE Fatman steering Column. Drive in comfort with this shortened steering column, plenty of room. Column measures 9 inches in length 1915-1925. price $150. plus shipping. Thanks :D

Last post

Couldn t resist!

2 Replies

225 Views

Last post by WaltM
Sat Apr 01, 2023 12:07 pm
1926-27 Tail Light Asssembly New Repro

Last post by TRDxB2 « Sat Apr 01, 2023 12:05 pm
Posted in Classifieds - Parts

by TRDxB2 » Sat Apr 01, 2023 12:05 pm » in Classifieds - Parts

Decided to go a different route. $80 plus shipping. Prefer PayPal family/friends but will accept checks
Lens cup is clear with red celluloid disk. Its likely to ship cheaper with the tail light bracket detached

0 Replies

70 Views

Last post by TRDxB2
Sat Apr 01, 2023 12:05 pm
My 1927 Model T Coupe Restoration

Last post by BLB27 « Sat Apr 01, 2023 12:03 pm
Posted in General Discussion Forum
Replies: 110
by BLB27 » Fri Apr 23, 2021 11:13 pm » in General Discussion Forum
1

2
First post

The restoration of my 1927 coupe is underway. I will post photos as it proceeds. Hope you will find them interesting. I have 27 photos to post now. Can I include all of them in one post? Any suggestions on how best to do this and how to continue to record the restoration over the next several months?

Last post

Switch Restored.
110 Replies

9526 Views

Last post by BLB27
Sat Apr 01, 2023 12:03 pm
FS 1916-25 Oil Tail Lamps

Last post by TRDxB2 « Sat Apr 01, 2023 11:52 am
Posted in Classifieds - Parts
Replies: 1
by Perry Goble » Sat Apr 01, 2023 11:32 am » in Classifieds - Parts

First post

1: $60 plus shipping

2: $50 plus shipping

3: $40 plus shipping (Side Lamp)

4: $40 plus shipping

5: $40 plus shipping

6: $35 plus shipping (missing side lens)

Not able to get pictures to work, if you know the secret, please let me know. In the meantime I will text you pictures if interested. 512-234-0243

Last post

1: $60 plus shipping

2: $50 plus shipping

3: $40 plus shipping (Side Lamp)

4: $40 plus shipping

5: $40 plus shipping

6: $35 plus shipping (missing side lens)

Not able to get pictures to work, if you know the secret, please let me know. In the meantime I will text you pictures if interested. 512-234-0243

Not sue how you tried loading...

1 Replies

66 Views

Last post by TRDxB2
Sat Apr 01, 2023 11:52 am
Only 8 weeks away, till LURAY!!!

Last post by Original Smith « Sat Apr 01, 2023 11:39 am
Posted in General Discussion Forum
Replies: 5
by James_Lyons-WV » Sun Mar 19, 2023 9:44 am » in General Discussion Forum

First post

It will soon be MAY, and that means LURAY!!
Yep, we are now LESS than EIGHT WEEKS away, from the 9th Annual Mid-Atlantic Pre-War Swap Meet!!

BUT REMEMBER, There’s MORE!!!

The MTFCI has joined ranks with the Shenandoah Valley Racket “T”ers to bring you THREE FULL DAYS OF TOURING immediately following our regularly scheduled two-day swap meet!...

Last post

I've been there twice. It's a lot of fun, but quite an expense from California! I flew out last year to Richmond, and was able to view the countryside on the way there.

5 Replies

471 Views

Last post by Original Smith
Sat Apr 01, 2023 11:39 am
rocky mountain brakes

Last post by Original Smith « Sat Apr 01, 2023 11:35 am
Posted in General Discussion Forum
Replies: 30
by Barteldes » Tue Mar 28, 2023 5:17 pm » in General Discussion Forum

First post

I have a 24 coupe and think i should get the rocky mountain brakes. I dont care if i die but it would be a shame to hurt that Beautiful car. Where do i start? Langs? Are they hard to install? And is it better to get the petal rather than welding on a tab yourself?

Last post

I had some of the springs reproduced recently for the original brakes, and am willing to sell them for $10 each.

30 Replies

842 Views

Last post by Original Smith
Sat Apr 01, 2023 11:35 am
FS- 1915 Touring Car

Last post by AndyClary « Sat Apr 01, 2023 11:30 am
Posted in Classifieds - Vehicles
Replies: 2
by AndyClary » Sat Mar 25, 2023 7:35 pm » in Classifieds - Vehicles

First post

Posting for non forum member. 1915 Touring mostly stock with electric start, KC Warford transmission and Rocky Mountain brakes. Contact owner for more information: Con Faraudo Seven-Oh-Seven Five-4-Five 7539. Car is located in Fulton, California. Asking price $14,000

Andy 6A6C288D-2AB9-4EBE-8D6B-E66DC1FCFD19.jpeg...

Last post

Bump to the top

Andy

2 Replies

670 Views

Last post by AndyClary
Sat Apr 01, 2023 11:30 am
FS 1915 Roadster

Last post by AndyClary « Sat Apr 01, 2023 11:30 am
Posted in Classifieds - Vehicles
Replies: 2
by AndyClary » Sat Mar 25, 2023 7:30 pm » in Classifieds - Vehicles

First post

Posting for a non forum member. 1915 Roadster. Electric start, distributor, ruckstell, another driveline transmission you’ll have to ask the owner about an Rocky Mountain brakes. For more information contact: Con Faraudo. Seven-Oh-Seven Five-4-Five 7539. Car is located in Fulton, California. Asking price $14,000....

Last post

Bump to the top

Andy

2 Replies

846 Views

Last post by AndyClary
Sat Apr 01, 2023 11:30 am
Ignition switch question

Last post by TXGOAT2 « Sat Apr 01, 2023 11:23 am
Posted in General Discussion Forum
Replies: 11
by SteveD » Thu Mar 30, 2023 12:09 pm » in General Discussion Forum

First post

My car came with an after market ignition switch. In a box of parts I found the original switch still mounted in the backing plate. I suspect it's easily restorable. My question is, how do I determine what key it takes?

Last post

I've seen a lot of old, poor quality die castings crumble and fall apart. Indoors or out, it doesn't matter. Often, other die castings in the same piece of equipment are as-new. Pre-WWII radios and phonographs often had pot metal parts, and indoor storage did not proetct the vulnerable parts.

11 Replies

366 Views

Last post by TXGOAT2
Sat Apr 01, 2023 11:23 am
FS ENGINES AND RUCKSTELLS

Last post by Mark Chaffin « Sat Apr 01, 2023 11:19 am
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Mon Mar 27, 2023 9:12 pm » in Classifieds - Parts

First post

Time to get some of the shop floor space cleared up. I have many complete engines (1917-1927) and several Ton Truck Ruckstell rear Axles with outside brakes that need to find new homes. Come take a look $200 each. Cash and carry. Located at the garage in Lake Elsinore, CA. No shipping. Mark Chaffin (951) 805-0928

Last post

Still available. Come take a look.

1 Replies

484 Views

Last post by Mark Chaffin
Sat Apr 01, 2023 11:19 am
WTB: Kelsey 88 Lugs

Last post by Mark Chaffin « Sat Apr 01, 2023 11:17 am
Posted in Classifieds - Parts
Replies: 5
by Stephen_heatherly » Fri Mar 31, 2023 11:15 am » in Classifieds - Parts

First post

I'm looking for some lugs for Kelsey 88 demountable rims. These rims use lugs that are separate from the rim. I have a few already but, need more to get a full set of 16.

Thanks,
Stephen

Last post

If Steve can't help let me know. I have a few nuts and lugs as well.

5 Replies

229 Views

Last post by Mark Chaffin
Sat Apr 01, 2023 11:17 am
Trained Ear, engine idle

Last post by TXGOAT2 « Sat Apr 01, 2023 11:16 am
Posted in General Discussion Forum
Replies: 15
by Keith Daniels » Thu Mar 30, 2023 8:29 pm » in General Discussion Forum

First post

Picker her up Sunday, got her running Tuesday, this is the third run. I think I'm getting closer on all the adjustments, plus the engine seems to be smoothing out, she sat for a few years.

The old oil looked about like when I change my diesel, only a little thick. My hearing isn't the best plus I don't really know what a T is supposed to sound...

Last post

Running the engine with the mixture too rich will quickly soot up both the spark plugs and the oil.
Cold starts, lots of idling, and short trips will foul the oil much quicker than normal driving, and may lead to plug fouling.

Generally speaking, don't start the engine unless you're going to drive the car at least several miles, preferabley on...

15 Replies

555 Views

Last post by TXGOAT2
Sat Apr 01, 2023 11:16 am
FS EARLY LOW HEAD

Last post by Mark Chaffin « Sat Apr 01, 2023 11:12 am
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Fri Mar 31, 2023 2:57 pm » in Classifieds - Parts

First post

Very nice early low head $200.00 plus domestic shipping. Mark Chaffin (951) 805-0928

Head 1.jpg

Head 2.jpg

Head 3.jpg

Last post

Sold to Wayne. Email sent. Thank you. 😀

2 Replies

246 Views

Last post by Mark Chaffin
Sat Apr 01, 2023 11:12 am
Need Help with the Starter Switch for My 1927 Coupe

Last post by Jacob Mangold « Sat Apr 01, 2023 9:56 am
Posted in General Discussion Forum
Replies: 12
by BLB27 » Thu Mar 30, 2023 11:01 pm » in General Discussion Forum

First post

I am getting ready to install a starter switch in my coupe. I have purchased two of the repos. They are the 5014 and 5014RE from Lang's. After looking at both, I would rather use my original switch. The switches are shown in the attached photos.

I want to consider using a starter solenoid. I appreciate some discussion about it, pros and cons,...

Last post

The only issue I’ve had with the 5014RE switch is the fact that the holes on the switch did not line up with the holes on my frame but it’s no big deal if you don’t mind a bit of drilling.

12 Replies

333 Views

Last post by Jacob Mangold
Sat Apr 01, 2023 9:56 am
Tony Bowker

Last post by FreighTer Jim « Sat Apr 01, 2023 9:25 am
Posted in General Discussion Forum
Replies: 28
by Model_T_Family » Wed Mar 29, 2023 8:29 pm » in General Discussion Forum

First post

Hi friends,

It saddens me to let you know Tony Bowker lost his fight today with a very aggressive Cancer. He was a dear friend, my role model in this hobby, a great mentor. I loved him like he was family. I had planned to see him this weekend but sadly it will never come. He loved these cars like no other, he loved his many friends and members he...

Last post

Today is Tony’s Birthday.
Oh The Irony.

FJ

IMG_5099.jpeg

28 Replies

1393 Views

Last post by FreighTer Jim
Sat Apr 01, 2023 9:25 am
Speedometer Stewart 26

Last post by MNToys « Sat Apr 01, 2023 9:01 am
Posted in Classifieds - Parts
Replies: 2
by MNToys » Fri Mar 31, 2023 9:32 pm » in Classifieds - Parts

First post

Stewart 26 in great shape. I have not had it on a car but I would think it works fine. Pictures show condition. Asking $200 including shipping.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593 95D2860E-23E4-4F0D-9ED6-E780C272B06C.jpeg

75AC1368-9AE1-4D57-858A-709BAE306A51.jpeg

CC01FE68-56C7-4947-9460-07A112CD6463.jpeg...

Last post

Sold thanks! Email sent

2 Replies

235 Views

Last post by MNToys
Sat Apr 01, 2023 9:01 am
TT diff. capacity

Last post by A Whiteman « Sat Apr 01, 2023 3:45 am
Posted in General Discussion Forum
Replies: 1
by Jacob Mangold » Sat Apr 01, 2023 12:27 am » in General Discussion Forum

First post

How much fluid should I put in the rear diff. of my ‘24 TT?
Thanks in advance, Jacob Mangold

Last post

Until it just starts coming out the filler hole.

1 Replies

94 Views

Last post by A Whiteman
Sat Apr 01, 2023 3:45 am
Zoom Zoom

Last post by Dollisdad « Sat Apr 01, 2023 12:56 am
Posted in General Discussion Forum
Replies: 3
by Dollisdad » Sat Apr 01, 2023 12:53 am » in General Discussion Forum

First post

2AAF33DB-89D0-41AD-82F4-F876BB4D01B3.jpeg F97479F9-FFCE-4D0B-940F-6DD91EC0A041.jpeg 5DE0410E-F339-4515-B7BA-117F4AF4C807.jpeg D4458BCB-9F6B-4153-981B-402E5430A44E.jpeg

Last post

C48BA281-89E1-4E8F-B30B-39A1A5D15A14.jpeg 33FD2D31-B361-437C-972D-23E891E969E6.jpeg 68AFAEAA-DAF3-443D-BA4E-C9D64443242B.jpeg FB0CD282-BDFB-4175-8F74-2BACE8A6147C.jpeg

3 Replies

245 Views

Last post by Dollisdad
Sat Apr 01, 2023 12:56 am
A real oddball Ford Script ignition key

Last post by TRDxB2 « Sat Apr 01, 2023 12:29 am
Posted in General Discussion Forum
Replies: 4
by FATMAN » Fri Mar 31, 2023 3:58 pm » in General Discussion Forum

First post

I am going through a lot of original keys and ran across this one
Ford Script but on the other side where number should be has TOEPFER or TOEPPER HARD TO SEE, ANYONE EVER SEEN ONE LIKE THIS? Bob
sorry photos are not clearer

Last post

May solve the letters and could be a special key they made
Perhaps a key blank was modified for a special lock, not for a car
TOEPFER.png
--
--

4 Replies

390 Views

Last post by TRDxB2
Sat Apr 01, 2023 12:29 am
Buffalo wire wheels

Last post by tselliott « Sat Apr 01, 2023 12:01 am
Posted in Classifieds - Parts
Replies: 4
by tselliott » Fri Mar 31, 2023 2:31 am » in Classifieds - Parts

First post

This is a nice solid set of wire wheels with Coker white wall tires. Tires have never been run. No bent, loose, or missing spokes. There is some pitting on the rims and some flaking paint. Overall a nice set of buffalo wire wheels. Could possibly be delivered to the Portland swap meet this weekend.
$3200
Scott Elliott
971-5O6-94O2

Last post

Sorry, no hubs

4 Replies

430 Views

Last post by tselliott
Sat Apr 01, 2023 12:01 am
Messenger wire wheels

Last post by OilyBill « Fri Mar 31, 2023 11:37 pm
Posted in General Discussion Forum
Replies: 21
by Tracer » Sun Oct 23, 2022 5:10 am » in General Discussion Forum

First post

Hi All
I have a set of Messenger wire wheels that suit a T. I am trying to find some information on how the hubcaps work? I am missing them all. Any information would be greatly appreciated
I believe these wheels were made in Canada

Last post

1/2 -12 threads and 1/2 -13 threads used to be commonly available.
The standard thread now is 1/2 -13, but I have a tap and die set for 1/2 -12 and I see them advertised occasionally on Ebay and other sales sites. It became obsolete in the late teens, (probably during wartime production in WWI it was dropped as a specification), although...

21 Replies

1796 Views

Last post by OilyBill
Fri Mar 31, 2023 11:37 pm
What have you done to your model T in March

Last post by fbergski « Fri Mar 31, 2023 10:54 pm
Posted in General Discussion Forum
Replies: 40
by modernbeat » Wed Mar 01, 2023 11:59 pm » in General Discussion Forum

First post

Installed a working switch panel with illumination into the camping car.

Last post

Finishing up my fuel injection install on my 16, hopefully have it completed by May.

3124

3123

40 Replies

2561 Views

Last post by fbergski
Fri Mar 31, 2023 10:54 pm
Tennessee Mort and the Model T

Last post by Bill Robinson « Fri Mar 31, 2023 10:19 pm
Posted in General Discussion Forum
Replies: 9
by Tim Rogers » Fri Mar 31, 2023 8:38 am » in General Discussion Forum

First post

Not sure who Tennessee Mort is/was, but he nailed it in this recording...

Last post

Is there anyone in here who is a longtime member of the Noken T's. I was on one of their tours a good while ago and at an evening supper/get-together that song came across on the P.A. system. We all got a kick out of it, mainly because we had all been in the same udn-udn situation at least once. I was told that the song was sung by one of their...

9 Replies

420 Views

Last post by Bill Robinson
Fri Mar 31, 2023 10:19 pm
Looking for a unusual wheel

Last post by Les Schubert « Fri Mar 31, 2023 9:53 pm
Posted in General Discussion Forum
Replies: 3
by Les Schubert » Fri Mar 31, 2023 3:28 pm » in General Discussion Forum

First post

4B5171D1-2913-40C7-B2C3-097D99459BA3.jpeg
I have 3 of these (2 front and 1 rear). They are 30x3-1/2 non demountable clincher with a steel felloe. I have a project I want to use them on, but would like to find the fourth!!

Last post

Don
Thank you

3 Replies

314 Views

Last post by Les Schubert
Fri Mar 31, 2023 9:53 pm
Awesome Original Patina Stewart 26 Speedometer

Last post by MNToys « Fri Mar 31, 2023 9:40 pm
Posted in Classifieds - Parts

by MNToys » Fri Mar 31, 2023 9:40 pm » in Classifieds - Parts

This has the perfect patina! All original Stewart #26 speedometer with bracket. Seems to work but I have not had it on a car. The pictures speak for themselves!!
Asking $300.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593 1D94FD61-579A-4E34-B19C-FA267B3438FB.jpeg

D99E8CE8-1651-4289-89E7-DE810C5CE050.jpeg...

0 Replies

213 Views

Last post by MNToys
Fri Mar 31, 2023 9:40 pm
FS BRASS STEERING COLUMN SUPPORT

Last post by Mark Chaffin « Fri Mar 31, 2023 8:03 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Fri Mar 31, 2023 7:16 pm » in Classifieds - Parts

First post

Heavy duty (solid) brass steering column support $75.00 plus $9.10 domestic USPO Flat Rate shipping. Mark Chaffin (951) 805-0928

Support.jpg

Last post

Sold to Larry. Thank Larry! 😀

1 Replies

210 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 8:03 pm
FOR SALE 50 year old collection of "T" parts one by one

Last post by DickC « Fri Mar 31, 2023 7:50 pm
Posted in Classifieds - Parts
Replies: 9
by Burlingtontguy » Sun Oct 16, 2022 11:59 pm » in Classifieds - Parts

First post

I have a 50 year old collection of T parts that needs to be down sized, E-mail or call with needs,, Dennis 401-932-3191

Last post

Sorry I'm late seeing your add. I didn't know I needed an ignition switch until now. I have a 25 coupe that has an after market (repo) switch that isn't worth dealing with. That is all the dealers have. I need an original, usable switch.

9 Replies

2536 Views

Last post by DickC
Fri Mar 31, 2023 7:50 pm
Our club mascot the comic hero

Last post by TWrenn « Fri Mar 31, 2023 7:46 pm
Posted in General Discussion Forum
Replies: 13
by TWrenn » Thu Mar 30, 2023 11:47 am » in General Discussion Forum

First post

A few years ago our club adopted Jim Riedy's Golden Retriever as our mascot. He loves riding in Jim's '26 Roadster. He even helps Jim at stop intersections by literally looking both ways for traffic. Jim's daughter is quite a talented artist and made this comic poster and framed it. I think Rich Eagle will appreciate this! That's Jim holding the...

Last post

Looks like Champ is living a pretty fine Dog's Life. A full time job to hang around with Jim and his friends, take rides in a neat old car and eat treats. He makes a fine mascot and I'm betting a great companion.

When I die I would LOVE to come back like Champ!

13 Replies

569 Views

Last post by TWrenn
Fri Mar 31, 2023 7:46 pm
wire wheels

Last post by sam mendenhall « Fri Mar 31, 2023 7:04 pm
Posted in Classifieds - Parts
Replies: 5
by Melba Nolan » Tue Nov 08, 2022 6:04 pm » in Classifieds - Parts

First post

For sale: set of 4 wire wheels $800 prefer picked up

20221108_124000.jpg 20221108_124024.jpg

Last post

Melba do you still have the wire wheels

5 Replies

1564 Views

Last post by sam mendenhall
Fri Mar 31, 2023 7:04 pm
Engine crank handle length

Last post by Moxie26 « Fri Mar 31, 2023 5:55 pm
Posted in General Discussion Forum
Replies: 6
by Dave Young » Fri Mar 31, 2023 6:57 am » in General Discussion Forum

First post

Just assembled my ‘26 RPU and am having trouble with the starting handle contacting the apron. Did the later cars use a longer handle or are they all the same? I’ve got the apron as far back as it can go, right against the leaf spring clamp and just can’t get good engagement on the pin.

Last post

Sure enough, that free dangling starting crank may have met up with a high curb while bouncing in on your last stop at Wawa for coffee altering the 90 degree bends.

6 Replies

316 Views

Last post by Moxie26
Fri Mar 31, 2023 5:55 pm
FS FIGURE EIGHT SHACKLE SET

Last post by Mark Chaffin « Fri Mar 31, 2023 5:44 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Fri Mar 31, 2023 2:56 pm » in Classifieds - Parts

First post

Very nice early figure eight shackle set $150.00 plus $9.10 domestic shipping. Mark Chaffin (951) 805-0928

Shackles 1.jpg

Shackles 2.jpg

Last post

Sold to Bill

1 Replies

271 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 5:44 pm
For Sale: ‘26-‘27 Rear brake drums

Last post by Ed Fuller « Fri Mar 31, 2023 5:18 pm
Posted in Classifieds - Parts

by Ed Fuller » Fri Mar 31, 2023 5:18 pm » in Classifieds - Parts

Here is a pair of ‘26-‘27 rear brake drums. They are in decent shape. They have some pitting but no heavy scoring.

$50 plus shipping in the U.S.

078AD61E-3E7B-4F22-8288-80751850727C.jpeg

233BD5CD-A518-4C0A-B6A6-9E48D55083A4.jpeg

0 Replies

122 Views

Last post by Ed Fuller
Fri Mar 31, 2023 5:18 pm
FS GO LIGHT TRAFFIC SIGNAL

Last post by Perry Goble « Fri Mar 31, 2023 5:18 pm
Posted in Classifieds - Parts
Replies: 1
by Perry Goble » Fri Mar 31, 2023 5:09 pm » in Classifieds - Parts

First post

FS original box
GO LIGHT Traffic Signal
$250
Text for pictures
5122340243

Last post

Text for pictures
5122340243

1 Replies

263 Views

Last post by Perry Goble
Fri Mar 31, 2023 5:18 pm
Got My Switch Back

Last post by BLB27 « Fri Mar 31, 2023 5:10 pm
Posted in General Discussion Forum

by BLB27 » Fri Mar 31, 2023 5:10 pm » in General Discussion Forum

I got my switch back today for my 1927 coupe. It is a beautiful restoration. Attached are before and after photos.

0 Replies

180 Views

Last post by BLB27
Fri Mar 31, 2023 5:10 pm
FS MISCELLANEOUS ITEMS

Last post by Mark Chaffin « Fri Mar 31, 2023 3:54 pm
Posted in Classifieds - Parts
Replies: 3
by Mark Chaffin » Thu Mar 30, 2023 5:00 pm » in Classifieds - Parts

First post

Several miscellaneous items available as described below. Shipping will be an additional charge. PM me or call Mark Chaffin (951) 805-0928

Manifold 1.jpg

Manifold 2.jpg
Economy Manifold accessory. Only one I have ever seen. Excellent condition was $125 now $100 plus $19.10 domestic USPO Flat Rate.

Bronze 1.jpg

Bronze 2.jpg
Heavy duty...

Last post

Sediment bulb sold to Shannon. Thank you Shannon. :)

3 Replies

470 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 3:54 pm
‘26 Touring Top Bows

Last post by Mustang1964s « Fri Mar 31, 2023 3:46 pm
Posted in General Discussion Forum
Replies: 2
by Carl » Thu Mar 30, 2023 3:02 pm » in General Discussion Forum

First post

On my ‘26 Touring the top bows ,that fit into the irons , have a “tenon” cut on them …
Does anyone have the length ,between tenons on all four bows ..I’m most concerned about the #1 & #4 bows …
The ones on them right now ,,look original ….But are different than the ones in the kit I got with the car …
They are from the Gentleman that produced them...

Last post

Are the Top Bows different on the '26 than on the '27?
The length between the first and second are different. It seems that the last is a little shorter than the third.

2 Replies

139 Views

Last post by Mustang1964s
Fri Mar 31, 2023 3:46 pm
FS AERMORE EXHAUST WHISTLE

Last post by Mark Chaffin « Fri Mar 31, 2023 3:45 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Fri Mar 31, 2023 3:03 pm » in Classifieds - Parts

First post

Aermore exhaust whistle $80.00 plus shipping. Mark Chaffin (951) 805-0928

aermore 1.jpg

aermore 2.jpg

Last post

Sold to Scott. Thanks Scott! :)

1 Replies

160 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 3:45 pm
26-7 fuel door springs

Last post by Les Schubert « Fri Mar 31, 2023 3:35 pm
Posted in General Discussion Forum

by Les Schubert » Fri Mar 31, 2023 3:35 pm » in General Discussion Forum

4214EA31-F137-4393-9DAE-2577BA40C421.jpeg
A few years ago I did a run of these. I see that there are 10 left. If you are interested, they are $25.00 each with 2 rivets and including postage.

0 Replies

97 Views

Last post by Les Schubert
Fri Mar 31, 2023 3:35 pm
Paintings that aren't Model Ts

Last post by Rich Eagle « Fri Mar 31, 2023 3:11 pm
Posted in OT - Off topic
Replies: 198
by Rich Eagle » Thu Mar 14, 2019 9:54 am » in OT - Off topic
1

2
First post

Finally I have stopped working on this one. After 170 hours it is not getting any better. I will turn it to the wall for a few months and then decide if I like it.
ModelS.jpg
You may recall that Herb offered this terrific photo a while back:

and Rob discovered some amazing information on Doctor Pagel who likely owned it:

Here are some steps...

Last post

We don't often get to think about getting in and out of conveyances back in the day. That is an interesting step. Many of the Hotels and Inns in Yellowstone still have high curbs for getting in and out of the stagecoaches and later, the buses.
Thanks for the comments.
198 Replies

42045 Views

Last post by Rich Eagle
Fri Mar 31, 2023 3:11 pm
FS HYDRAULIC BOOSTER FOR DISC BRAKES

Last post by Mark Chaffin « Fri Mar 31, 2023 3:05 pm
Posted in Classifieds - Parts

by Mark Chaffin » Fri Mar 31, 2023 3:05 pm » in Classifieds - Parts

Nice hydraulic booster setup for juice brakes $100.00 plus domestic shipping. Mark Chaffin (951) 805-0928

Brake Booster.jpg

0 Replies

149 Views

Last post by Mark Chaffin
Fri Mar 31, 2023 3:05 pm
knocking engine

Last post by speedytinc « Fri Mar 31, 2023 2:54 pm
Posted in General Discussion Forum
Replies: 44
by ElGranadaT » Mon Mar 27, 2023 7:39 pm » in General Discussion Forum

First post

Hello all,

I finally got my 22 touring barn find running today. It starts ok its firing on all cylinder well but it has a clear knock. The knock is in time with one of the pistons and it gets progressively louder as it heats up. After a few minutes it gets VERY loud and the engine slows to a stop.

this is not good -

My guess is its a bearing...

Last post

Those kinks each form natural dams for the band fuzz & other muck to hang up on.
You can have a blocked line not obvious looking @ the funnel.

44 Replies

1022 Views

Last post by speedytinc
Fri Mar 31, 2023 2:54 pm
Hydraulic stabilizer on front axle

Last post by Scott_Conger « Fri Mar 31, 2023 2:35 pm
Posted in General Discussion Forum
Replies: 16
by Model T Ron » Wed Mar 29, 2023 10:38 pm » in General Discussion Forum

First post

Just wanted to know everyone's thoughts on the Hydraulic stabilizer for front axle. I have one on my 15 Touring (came with it) and the car never seems to get caught in the ruts and I never had an issue with the front wheels tracking. I drove my 24 Coupe with a very tight front end for the first time last weekend and she tracked with the road. The...

Last post

Craig

it is a soap box worth standing on

16 Replies

534 Views

Last post by Scott_Conger
Fri Mar 31, 2023 2:35 pm
Email and PM from this site Not Working for Me

Last post by Jmeredith « Fri Mar 31, 2023 1:25 pm
Posted in Forum Support Questions
Replies: 3
by Distagon2 » Mon Feb 06, 2023 1:17 pm » in Forum Support Questions

First post

Just curious, I have been trying to send personal messages and emails using the functions on this site. Nothing seems to go through. I have two messages in my outbox but don't see a way to move them along. I thought once you hit submit on an email or PM, away it would go. What am I doing wrong?

Last post

I am having the same problem with email and pm’s.

Distagon2 I have been trying to reach you ever since the forum messed up and slowed down. Could you please contact me on email at gtojesse at yahoo dot com

Jesse.

3 Replies

533 Views

Last post by Jmeredith
Fri Mar 31, 2023 1:25 pm
Spring Rate of Watts Spring vs. Stock Ford?

Last post by speedytinc « Fri Mar 31, 2023 1:23 pm
Posted in General Discussion Forum
Replies: 8
by CudaMan » Fri Mar 31, 2023 10:40 am » in General Discussion Forum

First post

Does anyone know and can share just how much stiffer the special round wire Watts clutch spring is over the stock Ford flat wound spring?

Last post

Judging by the spring rates provided, a new higher tension square spring would work fine
with possibly a little extra tension via the 3 finger adjustment.

Do check the new springs tension. I have found a wide range from 110#'s to 130#'s
The stiffer tension preferred for the Watts disks.

8 Replies

166 Views

Last post by speedytinc
Fri Mar 31, 2023 1:23 pm
Ruckstell Axle

Last post by Barteldes « Fri Mar 31, 2023 12:37 pm
Posted in Classifieds - Parts
Replies: 6
by Barteldes » Wed Mar 29, 2023 5:55 pm » in Classifieds - Parts

First post

Does anyone know how i get my hands on a Ruckstell Axle? I suppose you are all laughing right about now.

Last post

Please state the year you are looking for!

1924 Coupe

6 Replies

739 Views

Last post by Barteldes
Fri Mar 31, 2023 12:37 pm
Mae West shackles

Last post by RichJ « Fri Mar 31, 2023 12:37 pm
Posted in Classifieds - Parts
Replies: 1
by Dollisdad » Fri Mar 31, 2023 11:26 am » in Classifieds - Parts

First post

Looking for a worn out set of 09-12 spring shackles.

Thanks Tom

Last post

I'll have some boxes of miscenalos stuff with some of them,
I'll be in Luray in May.

1 Replies

261 Views

Last post by RichJ
Fri Mar 31, 2023 12:37 pm
service in Colorado?

Last post by Barteldes « Fri Mar 31, 2023 12:32 pm
Posted in Services
Replies: 4
by Barteldes » Wed Mar 29, 2023 4:52 pm » in Services

First post

Does anyone know of service help i can get in colorado, fixing things that i can't do myself?

Last post

unfortunately, your experience is all too common, but trust me, when you FINALLY break through the crust and meet some folks, they'll ask what took you so long??

:lol: :lol:

Thats funny and im sure when i do they all know the car (bought here)
and i do love the Tyranny quote by the way

4 Replies

71 Views

Last post by Barteldes
Fri Mar 31, 2023 12:32 pm
running board tire pump

Last post by Melba Nolan « Fri Mar 31, 2023 10:16 am
Posted in Classifieds - Parts

by Melba Nolan » Fri Mar 31, 2023 10:16 am » in Classifieds - Parts

for sale: running board tire pump $50 plus postage

20220611_134431.jpg

0 Replies

132 Views

Last post by Melba Nolan
Fri Mar 31, 2023 10:16 am
Floorboard and trim questions

Last post by Rich P. Bingham « Fri Mar 31, 2023 10:08 am
Posted in General Discussion Forum
Replies: 11
by Reno Speedster » Thu Mar 30, 2023 1:41 am » in General Discussion Forum

First post

The floorboard in my 22 (not original) was banged up and broken so I made a new one out of some wood I had in the shop. I need to add some cleats on the bottom. Can anyone tell me how wide they are and how far from the ends of the board they were mounted? Also, it appears the cleats were held on with screws or nails, but I can’t tell from the...

Last post

There is probably more uniformity of dimensions for the later bodies. The original floor boards and the sill rebate in my Wilson-bodied '13 are 5/8 .

11 Replies

408 Views

Last post by Rich P. Bingham
Fri Mar 31, 2023 10:08 am
clutch spring

Last post by Melba Nolan « Fri Mar 31, 2023 10:04 am
Posted in Classifieds - Parts

by Melba Nolan » Fri Mar 31, 2023 10:04 am » in Classifieds - Parts

for sale: clutch spring $10 plus shipping

email melbanolan@aol.com or text 314-575-7115 for picture

0 Replies

98 Views

Last post by Melba Nolan
Fri Mar 31, 2023 10:04 am
Haynes rims

Last post by Melba Nolan « Fri Mar 31, 2023 10:01 am
Posted in Classifieds - Parts

by Melba Nolan » Fri Mar 31, 2023 10:01 am » in Classifieds - Parts

for sale: 2 haynes rims 30 x 3 good condition with surface rust. $300 plus shipping

email melbanolan@aol.com or text 314-575-7115 for pictures

0 Replies

161 Views

Last post by Melba Nolan
Fri Mar 31, 2023 10:01 am
Fs Kingston coil box

Last post by Bjerm « Fri Mar 31, 2023 8:16 am
Posted in Classifieds - Parts

by Bjerm » Fri Mar 31, 2023 8:16 am » in Classifieds - Parts

Nice Kingston coil box. Missing the lid $400 plus shipping I also have a few other Kingston boxes in various conditions email is the best way to reach me bjerm10@gmail.com

0 Replies

137 Views

Last post by Bjerm
Fri Mar 31, 2023 8:16 am
Excellent Surplus Parts For Sale

Last post by RichJ « Fri Mar 31, 2023 3:52 am
Posted in Classifieds - Parts
Replies: 20
by Rick_Rice » Sun Feb 19, 2023 8:41 am » in Classifieds - Parts

First post

I am starting the process to prepare for retirement and have decided to concentrate only on keeping and improving my 1914 open express truck. I spent the day yesterday going through all my Model T treasures and have the following excellent surplus parts available for sale.
I can not post photos and please do not private message me through this...

Last post

Got my items from Mr Rice in good order and would recommend him as a seller
All I'm gonna say is thanks Rick and I have had one unhappy buyer myself

nv Bob
Probably refuting to me,
ruxstel parts was perfect, neglected to say ,they for TT !
Contact me off line for details.

20 Replies

2599 Views

Last post by RichJ
Fri Mar 31, 2023 3:52 am
WTB: peddlers box for the back of a t roadster

Last post by frontyboy « Thu Mar 30, 2023 11:35 pm
Posted in Classifieds - Parts
Replies: 11
by frontyboy » Tue Mar 21, 2023 11:16 pm » in Classifieds - Parts

First post

looking for a peddlers box for a roadster. Condition not important as long as it has the hardware.

frontyboy 2ho6 9191949 text or call.

Last post

Still looking

frontyboy

11 Replies

900 Views

Last post by frontyboy
Thu Mar 30, 2023 11:35 pm
Amp meter

Last post by DHort « Thu Mar 30, 2023 11:18 pm
Posted in General Discussion Forum
Replies: 12
by Barteldes » Fri Mar 24, 2023 10:30 am » in General Discussion Forum

First post

Langs doesn't have an amp meter. Mine is sticking. Is there a way to clean it? or somewhere else to get one?

Last post

Did you try Snyders, Chaffins, Bob's, and Gaslight Auto?

12 Replies

557 Views

Last post by DHort
Thu Mar 30, 2023 11:18 pm
Portland Swap Meet

Last post by KWTownsend « Thu Mar 30, 2023 10:37 pm
Posted in General Discussion Forum

by KWTownsend » Thu Mar 30, 2023 10:37 pm » in General Discussion Forum

The Portland Swap Meet begins tomorrow, March 31. The Always in April swap meet continues through Sunday April 2. Rain (most likely) or shine, come on out and see me at the HCCA booth in the northeast corner of the D building. Look for the big yellow banner!

PSM 2017-1.jpg

: ^ )

Keith

0 Replies

134 Views

Last post by KWTownsend
Thu Mar 30, 2023 10:37 pm
Kingston 4-Ball Carburetor

Last post by MNToys « Thu Mar 30, 2023 9:42 pm
Posted in Classifieds - Parts

by MNToys » Thu Mar 30, 2023 9:42 pm » in Classifieds - Parts

Nice original 4-Ball. Looks complete. Nothing is frozen-ready for rebuild. I have not had the bowl off. $150 including shipping to the lower 48.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

C6D644F0-BF77-4E65-86C3-A13C004B4DA0.jpeg

E1B686F2-A66B-4CDB-BF67-40173E70EB55.jpeg

9DF646EB-E6CB-4AC3-BCBC-2352BB5180AA.jpeg...

0 Replies

138 Views

Last post by MNToys
Thu Mar 30, 2023 9:42 pm
Complete Ruckstell with extra parts FS

Last post by reifjr « Thu Mar 30, 2023 9:21 pm
Posted in Classifieds - Parts

by reifjr » Thu Mar 30, 2023 9:21 pm » in Classifieds - Parts

Selling a complete Ruckstell differential, with the shifter assembly. I also have an assortment of parts that can be used to build up a second Ruckstell.

The complete assembly, in the attached photo, was under my 26 Roadster and is in excellent condition. Thrust washers, gaskets and new bearings should be all that's needed.

Most if the parts...

0 Replies

267 Views

Last post by reifjr
Thu Mar 30, 2023 9:21 pm
FS PINION GEARS

Last post by Mark Chaffin « Thu Mar 30, 2023 9:17 pm
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Thu Mar 30, 2023 5:21 pm » in Classifieds - Parts

First post

An assortment of very nice rear axle pinion gears. Prices and description as indicated below. Domestic shipping will be an additional charge of $9.10 USPO Priority Flat Rate. PM me or call Mark Chaffin (951) 805-0928

Pinion 1.jpg
10 Tooth Pinion. $100 plus shipping.

Pinion 2.jpg
11 Tooth Pinion. $75.00 plus shipping

Pinion 3.jpg
11 Tooth...

Last post

Sold to Terry.

2 Replies

262 Views

Last post by Mark Chaffin
Thu Mar 30, 2023 9:17 pm
MTFCA Annual Meeting

Last post by Scott_Conger « Thu Mar 30, 2023 8:09 pm
Posted in General Discussion Forum
Replies: 27
by AndyClary » Tue Mar 28, 2023 9:30 am » in General Discussion Forum

First post

Wasn’t there a meeting last weekend? Any reports or photos?

Andy

Last post

And right now as of 5:47 Mountain Time, there are exactly 3 Club members on the Forum, along with 285 guests

Maintaining total radio silence on the Forum is a perfect way to protect Club goings-on from 285 potential interlopers who just might be inspired to join the Club. GADS!!

I doubt very much that a few pictures here would spoil the...

27 Replies

836 Views

Last post by Scott_Conger
Thu Mar 30, 2023 8:09 pm
Switch panel FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:05 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sun Mar 26, 2023 11:36 am » in Classifieds - Parts

First post

Early switch panel. Has lock tumbler in, key 55. But does not turn. No switch parts. Has an amp meter, don’t know condition. Needle does move. $20.00 + shipping. Email me at address in pictures. Thanks Dan.
00147A12-0BB5-4D8B-B28A-BD6007ED9848.jpeg
C69B8233-77B5-433A-A18F-1943ED243095.jpeg
2F6D2D44-50B1-49FD-97A9-D3E3FAD901C1.jpeg

Last post

Back to the top

3 Replies

419 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:05 pm
26/27 Amp Meter FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:04 pm
Posted in Classifieds - Parts
Replies: 4
by Dan Hatch » Sun Mar 26, 2023 2:31 pm » in Classifieds - Parts

First post

Here is a 26/27 amp meter. Looks like an original, but I am not sure. Needle moves, don’t know if it works. $25.00. Email me at address in pictures. Thanks Dan.
339BEADE-64FF-41AA-BA80-F1775EA1443A.jpeg
F13962B9-E4A6-4468-B6BD-DF5C07DA0A12.jpeg
80B89D7E-7F36-4C5D-9CCC-8D12F7CC95E3.jpeg

Last post

Back to the top

4 Replies

332 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:04 pm
NOS T 3420 FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:04 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sun Mar 26, 2023 11:01 am » in Classifieds - Parts

First post

Here are some 3420 low speed adjusting screw lock nuts. They are NOS. $2.50 each + shipping. Email me at address in pictures. Thanks Dan
678F7B03-52B7-47D5-A937-DC3361E6AC98.jpeg
2C7F4E1C-8724-4945-A34E-6179FC149B8F.jpeg

Last post

Back to the top

3 Replies

640 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:04 pm
Tobin Arp Mike FS

Last post by Dan Hatch « Thu Mar 30, 2023 8:03 pm
Posted in Classifieds - Parts
Replies: 5
by Dan Hatch » Sun Mar 26, 2023 11:17 am » in Classifieds - Parts

First post

Here is a TA14/15 Mike. This is a direct read Mike made by Starrett. Only selling cause I am downsizing. $225.00 + shipping. Email me at address in pictures. Thanks Dan
8D46C8B1-F568-44FE-A191-2E0ACF5B632E.jpeg
B179FB46-B286-46C2-970B-BF8D31CD58C3.jpeg
1191AAC7-0F8E-49F4-B330-BD3A877C4739.jpeg

Last post

Back to the top

5 Replies

558 Views

Last post by Dan Hatch
Thu Mar 30, 2023 8:03 pm
ORIGINAL NON FORD KEYBOARD

Last post by blauvelt « Thu Mar 30, 2023 7:55 pm
Posted in Classifieds - Parts
Replies: 7
by Chaffins » Sat Mar 25, 2023 2:18 pm » in Classifieds - Parts

First post

ORIGINAL NON FORD KEY BOARD $25.00 PLUS SHIPPING SAYS KEYS TO FIT FORDS

SOLD

Last post

No!

ANOTHER ORIGINAL NON FORD KEYBARD $250.00

PICTURE PLEASE!!

Never mind... No longer interested.

7 Replies

800 Views

Last post by blauvelt
Thu Mar 30, 2023 7:55 pm
6Th Annual Model T- Model A- Prewar Swap. Minnesota.

Last post by BobP « Thu Mar 30, 2023 7:51 pm
Posted in General Discussion Forum
Replies: 12
by BobP » Sun Mar 05, 2023 3:08 pm » in General Discussion Forum

First post

We are having our 6th annual Model T- Model A - prewar swap meet and car show at our farm Saturday April 22, 2023 stating at 7AM. Free overnight primitive camping. Free setup, free admission. Restroom and lunch wagon on site. Location is 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell or look. Questions, call 507 458...

Last post

btttttttttttttttttt

12 Replies

818 Views

Last post by BobP
Thu Mar 30, 2023 7:51 pm
W T B--1913 roadster body or project car

Last post by Burlingtontguy « Thu Mar 30, 2023 7:32 pm
Posted in Classifieds - Parts
Replies: 17
by Burlingtontguy » Sun Jan 08, 2023 8:51 pm » in Classifieds - Parts

First post

I am looking for a 1913 0r 1914 body to build a Runabout Give me a call or send e-mail with pictures and price with contact number
Dennis 401-932-3191

Last post

to the top

17 Replies

1898 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:32 pm
1923 &1924 Chassis FOR SALE

Last post by Burlingtontguy « Thu Mar 30, 2023 7:31 pm
Posted in Classifieds - Parts
Replies: 23
by Burlingtontguy » Thu Nov 18, 2021 7:07 pm » in Classifieds - Parts

First post

DSCF0979 .JPG I have 2 Chassis FOR SALE. They have front fenders,{passenger or Commercial}, Radiators and shells, steel fire walls,steering columns, e-brake handle & rods,wheels with tires, fuel tanks, rear roadster fenders or coupe fenders, running boards . Engines rebuildable or running engine option. $4000 each OBO. engine prices to be...

Last post

to the top

23 Replies

5432 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:31 pm
Model T Manley Wrecker Boom Project For Sale

Last post by Burlingtontguy « Thu Mar 30, 2023 7:30 pm
Posted in Classifieds - Parts
Replies: 26
by Burlingtontguy » Mon Mar 21, 2022 8:58 pm » in Classifieds - Parts

First post

i have a 1923 model t chassis with a Wooden Cab and a Hand Crank Manley Wrecker Boom for sale, I will sell all of the wrecker as one piece or part of the components, Just the Cab ,Or Just the Wrecker boom, or just the chassis, your call, I need to Down size my estate at this time, give me a call to discuss the T . thanks, Dennis 401-932-3191...

Last post

to the top

26 Replies

4903 Views

Last post by Burlingtontguy
Thu Mar 30, 2023 7:30 pm
For Sale: Set of 4 Wire Wheel Hubs

Last post by Ed Fuller « Thu Mar 30, 2023 6:32 pm
Posted in Classifieds - Parts
Replies: 1
by Ed Fuller » Thu Mar 30, 2023 6:30 pm » in Classifieds - Parts

First post

Here is a set of 4 wire wheel hubs. One front hub has had a stud replaced and the other front hub still has some old bearings installed . The rear hubs have nice tapers and keyways. Looks like they were installed on axle shafts. The drums have some heavy pitting.

$450 plus shipping in the U.S. for the set....

Last post

4942E0C3-F2CA-4162-BDF4-4D20AFC552EA.jpeg

3C323C66-A674-4FA9-A730-2E581D6204EE.jpeg

1 Replies

164 Views

Last post by Ed Fuller
Thu Mar 30, 2023 6:32 pm
Cabin fevered dreams

Last post by TWrenn « Thu Mar 30, 2023 6:15 pm
Posted in General Discussion Forum
Replies: 3
by Steve Jelf » Thu Mar 30, 2023 11:21 am » in General Discussion Forum

First post

For no particular reason except that I really want to get back to traveling, here are three shots on the road last year.

IMG_9728 copy.JPG
On Christie Street, Greenfield Village.

IMG_9719 copy.JPG
Early morning by a soybean field, Crawfordsville, Indiana.

IMG_9694.JPG
Part of the adventure, near Bowling Green, Missouri. My...

Last post

I broke my cabin fever 4 times in February. It was a nicer month to bring out the Fordor than March was! I'm glad March is over.

3 Replies

376 Views

Last post by TWrenn
Thu Mar 30, 2023 6:15 pm
1909-1912 Head - SOLD

Last post by slang250 « Thu Mar 30, 2023 5:20 pm
Posted in Classifieds - Parts
Replies: 1
by Ashley » Thu Mar 30, 2023 2:22 pm » in Classifieds - Parts

First post

1909-1912 Head, no cracks, has been glass beaded. 5 of the head bolt holes have been made oversize. $500 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230330_141054.jpg
20230330_141050.jpg
20230330_141040.jpg
20230330_141035.jpg

Last post

The head has been spoken for pending payment. Thank You Steve

1 Replies

236 Views

Last post by slang250
Thu Mar 30, 2023 5:20 pm
dash panel and steering column mounting bracket

Last post by Waldo « Thu Mar 30, 2023 5:13 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Fri Mar 03, 2023 9:31 pm » in Classifieds - Parts

First post

for sale: dash panel and steering column mounting bracket top and bottom 1923/25 $45 plus postage
20220528_121237.jpg 20221216_131412.jpg

Last post

looks like you are showing the back side of the panel, what does the front look like? is it straight? any rust pits?

2 Replies

304 Views

Last post by Waldo
Thu Mar 30, 2023 5:13 pm
Can anyone identify these windshield hinges 1 pair is black and brass

Last post by Wayne Sheldon « Thu Mar 30, 2023 4:31 pm
Posted in General Discussion Forum
Replies: 4
by FATMAN » Wed Mar 29, 2023 12:24 pm » in General Discussion Forum

First post

Going through some more original parts I ran across these odd and large car windshield hinges one is brass and steel the other all steel, anyone have any ideas? Bob

Last post

The AACA forum has a What Is It? section. It is amazing how some of those people can recognize some really obscure stuff!

Since so much of the hobby has gone to really modern stuff? It is surprising how many real experts on the early stuff are still quite active in that club and on that forum!

From the general design, I would expect that...

4 Replies

276 Views

Last post by Wayne Sheldon
Thu Mar 30, 2023 4:31 pm
Gilmore Museum "Celebration of brass" worth attending?

Last post by Steve Jelf « Thu Mar 30, 2023 3:36 pm
Posted in General Discussion Forum
Replies: 3
by NealW » Thu Mar 30, 2023 1:37 pm » in General Discussion Forum

First post

My wife and I are planning a trip back to NW Ohio to visit my brother and family this summer. I plan on heading to the HF, Piquette museum and a Highland Park drive by with my brother while there. We will be heading up to Mackinac for a couple of days before heading back to Kansas by way of Chicago, and that conveniently takes us past the Gilmore...

Last post

The Gilmore is a must-see, with or without the special weekend. If you can fit those dates into your schedule, yes, go.

IMG_1781 copy.JPG
Stopping at the Gilmore, 2018.

3 Replies

254 Views

Last post by Steve Jelf
Thu Mar 30, 2023 3:36 pm
Sold ! Stewart Speedometer & Swivel

Last post by KWTownsend « Thu Mar 30, 2023 2:24 pm
Posted in Classifieds - Parts
Replies: 4
by KWTownsend » Tue Mar 28, 2023 2:32 pm » in Classifieds - Parts

First post

Stewart Model C, correct for 1913 in very nice condition. Untested, but drum turns when input is turned. $150.

Rebuilt swivel, 2-1/2:1 Rebuilt, very nice. $275

Price is firm, selling for widow.

Free delivery to the Portland Swap Meet this coming weekend.
20230328_111022.jpg

Last post

Both are sold!
Thanks MTFCA

4 Replies

400 Views

Last post by KWTownsend
Thu Mar 30, 2023 2:24 pm
Want to Trade coupe for my touring.

Last post by Sarikatime « Thu Mar 30, 2023 2:24 pm
Posted in Classifieds - Vehicles

by Sarikatime » Thu Mar 30, 2023 2:24 pm » in Classifieds - Vehicles

Would anyone be open to trading your 19 or 20 coupe for my 15 touring? The touring is well equipped with whatever anyone would want but we can discuss details. What do you have.
Frank at 818-254-6797

0 Replies

348 Views

Last post by Sarikatime
Thu Mar 30, 2023 2:24 pm
WTB metal firewall bracket for stewart 160 speedometer

Last post by Reno Speedster « Thu Mar 30, 2023 1:59 pm
Posted in Classifieds - Parts

by Reno Speedster » Thu Mar 30, 2023 1:59 pm » in Classifieds - Parts

I am assembling parts to install a Stewart 160 speedometer on my 22. I am looking for the bracket for mounting the speedo head to the metal dash (see picture). Please get in contact if you have one you would sell. Thanks

0 Replies

65 Views

Last post by Reno Speedster
Thu Mar 30, 2023 1:59 pm
Help for mesurement about reflector for Gas Headlight

Last post by Quickm007 « Thu Mar 30, 2023 1:13 pm
Posted in General Discussion Forum
Replies: 3
by Quickm007 » Thu Mar 30, 2023 9:32 am » in General Discussion Forum

First post

I found an 1914 original glass mirror Reflector for gas headlight in usable condition but it's appear the diameter is too small and doesn't fit. Someone know what is the correct measurement ? The actual glass I have is 6''. The head light I have is Corcoran Lamp Co made for Ford Cin'ti. Also, if you could post the way how it is fit inside of the...

Last post

Thank you John,I had intalled the 3 back edge where flathead screws would go to hold the mirror in place, but it had the gap which not allowed me to keep the mirror in place. Lang's do not have the insulation pads that go between the back of the mirror and the bottom of the headlight. You may know another vendor maybe. I will try to post tonight a...

3 Replies

150 Views

Last post by Quickm007
Thu Mar 30, 2023 1:13 pm
Should I hot rod it?

Last post by Adam « Thu Mar 30, 2023 12:53 pm
Posted in General Discussion Forum
Replies: 8
by TheSpeedsterProject » Wed Mar 29, 2023 7:54 pm » in General Discussion Forum

First post

So I hurt my back and I'm down for a bit - so I grabbed the laptop and edited the last of the footage I took pre-tweak.

Here it is for those interested:

It's two parts - skip what you don't like.

In the video I discuss options on what I could do to the fordor. I can't sell it as is cause something inside is clearly not right and I can't move...

Last post

It takes 3 hours to completely remove a T engine from a Fordor Sedan.

It takes 6 hours to install an engine and completely put everything back together (steering, radiator, starter, wishbone, axle connections, & initial adjustment).

Once you get the engine on the stand; Removing and disassembling the trans and diagnosis is about an hour and a...

8 Replies

699 Views

Last post by Adam
Thu Mar 30, 2023 12:53 pm
**FATE**

Last post by Rich P. Bingham « Thu Mar 30, 2023 12:40 pm
Posted in OT - Off topic
Replies: 42
by Professor Fate » Sat Sep 10, 2022 9:52 pm » in OT - Off topic

First post

20210918_104823.jpg

Last post

It's one of the best examples of the height of movie entertainment. Wonderfully visual, well acted, light hearted comedy, and a superb musical score. We can hope for a renaissance, but if it comes, it will be much different.

From a historical perspective, in 1964 we were much closer to all the elements of that scenario, the cars, the dress, the...

42 Replies

3077 Views

Last post by Rich P. Bingham
Thu Mar 30, 2023 12:40 pm
Why Can I Not Post Photos?

Last post by Norman Kling « Thu Mar 30, 2023 12:03 pm
Posted in General Discussion Forum
Replies: 12
by BLB27 » Tue Mar 28, 2023 9:29 pm » in General Discussion Forum

First post

Why can't I post photos that are taken with my phone in vertical position?

Last post

I wouldn't even know whether or not you can load directly from your phone. However all my pictures are loaded into the computer under My Pictures. Whether or not they came from a phone or from someone else's e-mail. My wife does Facebook and she sometimes loads the pictures to MY pictures. I take them from My pictures directly to the forum. Then I...

12 Replies

307 Views

Last post by Norman Kling
Thu Mar 30, 2023 12:03 pm
FS—> 1912 Wisconsin Tag.

Last post by Runabout « Thu Mar 30, 2023 11:49 am
Posted in Classifieds - Parts
Replies: 5
by Runabout » Tue Mar 28, 2023 7:46 pm » in Classifieds - Parts

First post

Nice 1912 Wisconsin license plate, $150 plus shipping.
4 Ball Kingston Carburetor. Ran extremely well and idled like a dream on my 1915 T then it took a dump and started leaking fuel, I’m sure a needle valve and seat is needed, $250. plus shipping. I’ve got the correct carburetor for my T now so this one is available....

Last post

Tag is spoken for, pending payment….Thanks Tim. I didn’t get your PM please resend or call.

5 Replies

345 Views

Last post by Runabout
Thu Mar 30, 2023 11:49 am
Is it 110 or 240 volt

Last post by ABoer « Thu Mar 30, 2023 11:05 am
Posted in General Discussion Forum
Replies: 14
by ABoer » Sun Mar 26, 2023 9:44 am » in General Discussion Forum

First post

From a friend I got a Octopus Growler ,he is made in England .
Here in the Netherlands we have 240 Volt AC .
So I like to know or this growler is 110 or 220 Volt .
Thanks for your answer .

Toon 001.JPG 002.JPG 003.JPG

Last post

Thanks for all the information !!!!!
Toon

14 Replies

699 Views

Last post by ABoer
Thu Mar 30, 2023 11:05 am

Search found 245 matches

Go to advanced search