MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 172 matches

Topics

Replies

Views

Last post

Have I ever said I hate nightmares??

Last post by speedytinc « Tue Jan 13, 2026 12:55 pm
Posted in General Discussion Forum
Replies: 12
by Daisy Mae » Tue Jan 13, 2026 11:27 am » in General Discussion Forum

First post

I generally don't recall my dreams, but this morning I woke up like I'd been poked with a cattle prod!
I had recently rebuilt my rear axle. Through all the various test fits setting thrust bearings and gear lash, while I had torqued down the pinion gear, I had left it unpinned intending to do it with final fitment. Generally, I'm always very anal...

Last post

Kurt, you can get a Depstech bore scope for $70 online. I have one and it works great.

I have the same one. Is a self contained unit.
There are cheaper versions that use your cell phone for the screen.
Paid for itself @ the first transmission fishing expedition.

12 Replies

77 Views

Last post by speedytinc
Tue Jan 13, 2026 12:55 pm
Water in the Oil

Last post by John_Aldrich « Tue Jan 13, 2026 12:54 pm
Posted in General Discussion Forum
Replies: 23
by John_Aldrich » Sat Jan 10, 2026 5:30 pm » in General Discussion Forum

First post

NOT good.
Pulled the engine to put a rebuilt transmission on.

Put the car back together and when I checked the oil prior to starting the car it had oil in it (I installed a dipstick years ago).

Changed the oil and pulled the head thinking I had a blown head gasket. Replaced the head gasket (didn't really look bad) and reassembled.

Started the...

Last post

You said you have a 27 block Canadian block. If not mistaken those 26/7 blocks had some issues with cracks developing from the seat to the cylinder. If I’m wrong please excuse me. Best John

What is the seat ?

23 Replies

664 Views

Last post by John_Aldrich
Tue Jan 13, 2026 12:54 pm
Unusual Transmission problem '26 Touring

Last post by TXGOAT2 « Tue Jan 13, 2026 12:45 pm
Posted in General Discussion Forum
Replies: 17
by Chris Bamford » Sat Jan 10, 2026 12:11 pm » in General Discussion Forum

First post

1926 Touring, sudden-onset problem of slipping in high, but low and reverse are fine. Peeked inside for clues and found the clutch fingers quite loose. Had the clutch spring broken in service? Careful inspection showed it was intact, but...

After much puzzling I finally noticed that the clutch spring and spring cup were pushed right back the...

Last post

Another thought: Model Ts do not like thick oil, ESPECIALLY in COLD WEATHER. It can cause serious engine damage, and it might contribute to clutch slippage, due to being excessively viscous. For general use, 10W30 is a good choice. In cold weather, 5W30 or 5W20 is better. In very cold weather, a 0W20 synthetic might be best. Ford specifically...

17 Replies

445 Views

Last post by TXGOAT2
Tue Jan 13, 2026 12:45 pm
Zoom Zoom

Last post by hull 433 « Tue Jan 13, 2026 12:34 pm
Posted in General Discussion Forum
Replies: 4
by Dollisdad » Tue Jan 13, 2026 11:23 am » in General Discussion Forum

First post

IMG_4845.jpeg IMG_4846.jpeg IMG_4869.jpeg IMG_4820.jpeg

Last post

Something’s off with the “Boeing” photo. Proportions are off, body details wrong and the bystanders have blurred faces. It looks like AI.

More painted brass in the other photos, a heavily accessorized touring and a four year old tourabout. Great shots, thanks Tom.

4 Replies

55 Views

Last post by hull 433
Tue Jan 13, 2026 12:34 pm
I’m stumped

Last post by George Mills « Tue Jan 13, 2026 12:17 pm
Posted in General Discussion Forum
Replies: 19
by George Mills » Sun Jan 11, 2026 5:15 pm » in General Discussion Forum

First post

IMG_5241.jpeg This is the first time the carb has been off in 30+ years.

It’s an NH

What ‘magic’ was it supposed to do ? ( the coil spring)

Thanks in advance….

Last post

Thanks all for the info and discussion.

It's my sons' stewardship now, as is my one of my other T's by the oldest son...let them enjoy ownership now-with me-rather than wait for the fateful day. My son had already bought and planned on installing a 'G' since the car is a '15. The rebuild idea was based on an unknown as in his life that carb has...

19 Replies

559 Views

Last post by George Mills
Tue Jan 13, 2026 12:17 pm
Austin TX location, Movie production person looking for model T’s & other type vehicles

Last post by George House « Tue Jan 13, 2026 11:05 am
Posted in General Discussion Forum
Replies: 3
by JTT3 » Tue Jan 13, 2026 12:15 am » in General Discussion Forum

First post

March 12-18 in Texas

Last post

Many thanks James !!

3 Replies

118 Views

Last post by George House
Tue Jan 13, 2026 11:05 am
Found cut in pan, from inside out... Pull hogshead AND pan?

Last post by TXGOAT2 « Tue Jan 13, 2026 10:48 am
Posted in General Discussion Forum
Replies: 26
by lewcombs@gmail.com » Fri Jan 09, 2026 10:44 pm » in General Discussion Forum

First post

I am new at this. I will get names of stuff wrong. Please be patient and try to interpret.

I was planning to change all fluids, greases, etc. in my 1923 touring car.
First thing was oil change, and I immediately saw the new oil spilling out.
Found a 1 long vertical cut in the outmost edge of the pan where it surrounds the flywheel.. drivers...

Last post

The damage may be from an object dropped into the transmission at some time in the past. Or it could be a part or fragment of a part that came loose when the car was running. Such a part, or fragment of a part, may have been trapped by centrifugal force or sludge as the car was running, but came loose and did the damage as the engine was shut down...

26 Replies

882 Views

Last post by TXGOAT2
Tue Jan 13, 2026 10:48 am
Wanted 5 or 10 minute Educational lesson on impact of Model T or assembly line

Last post by TXGOAT2 « Tue Jan 13, 2026 10:22 am
Posted in General Discussion Forum
Replies: 2
by Hap_Tucker » Mon Jan 12, 2026 8:36 pm » in General Discussion Forum

First post

Bottom Line Up Front:

Our local South Carolina Model T chapter is going to show their T’s to a local college that has an automobile history class (or similar title). Feb 2 or sometime close to that is the date.

Do any of you know of a 5 or 10 minute presentation with PowerPoint slides or pictures that I might be able to download or borrow?...

Last post

Ford created a lot of film productions relating to factory operations. I don't if that material, or excerpts, is available today in some accessible form.

2 Replies

118 Views

Last post by TXGOAT2
Tue Jan 13, 2026 10:22 am
Another generator question - A new one on me!

Last post by Scott_Conger « Tue Jan 13, 2026 9:53 am
Posted in General Discussion Forum
Replies: 15
by Marshall V. Daut » Mon Jan 12, 2026 4:28 pm » in General Discussion Forum

First post

After finally getting the engine to run in a friend's newly-purchased '26 T, it was noted that the ammeter did not register a charge even when the engine was revved up. The ammeter was wired backwards (of course!), showing a charge when the lights were tested. Once the ammeter wires were corrected, turning on the headlights gave a discharge on the...

Last post

Accurate wiring diagram, color coded wiring on back of the switch - or a link to Ron's diagram that is a bit larger and easier to see -

A generator that motors slowly and has a black commutator has problems. Cleaning up the commutator with 320 grit and leaving that finish on it without dressing it with finer and finer grades of paper (to at...

15 Replies

268 Views

Last post by Scott_Conger
Tue Jan 13, 2026 9:53 am
Rear Hub Puller FS

Last post by Dan Hatch « Tue Jan 13, 2026 9:21 am
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sat Jan 10, 2026 10:36 am » in Classifieds - Parts

First post

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Last post

Back to the top

1 Replies

187 Views

Last post by Dan Hatch
Tue Jan 13, 2026 9:21 am
Battery tops NOS. FS

Last post by Dan Hatch « Tue Jan 13, 2026 9:20 am
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sat Jan 10, 2026 2:38 pm » in Classifieds - Parts

First post

Here are a pair of NOS Battery cell tops for the 1925 Rubber case Ford battery. They don’t say Ford on the but came extra with my NOS Ford battery. Taken out of a Ford dealership in the 1960. $30 for the pair + shipping. Email me by forum. Dan
IMG_5149.jpeg

IMG_5150.jpeg
IMG_5151.jpeg

Last post

Back to the top

3 Replies

445 Views

Last post by Dan Hatch
Tue Jan 13, 2026 9:20 am
Wood locking steering wheel

Last post by Jeepbone1 « Tue Jan 13, 2026 8:12 am
Posted in Classifieds - Parts
Replies: 5
by Wingnut » Fri Jan 09, 2026 7:04 pm » in Classifieds - Parts

First post

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

Last post

I’m pretty sure it’s a Fox wheel. There should be a tag on the side riveted in place. I had one on my coupe. The key blanks aren’t easy to find. Took my local locksmith a week of searching through boxes he hadn’t seen in 40+ years.

Brad

5 Replies

493 Views

Last post by Jeepbone1
Tue Jan 13, 2026 8:12 am
Rest in peace Dick Hautzinger

Last post by 1925 Touring « Tue Jan 13, 2026 7:50 am
Posted in General Discussion Forum
Replies: 4
by Jerry M » Sat Jan 10, 2026 7:34 pm » in General Discussion Forum

First post

Hello everyone. A very sad day here, Dick Hautzinger passed yesterday. I was very fortunate to know him for quite some time and travel to many swap meets, shows with him. I was always surprised by the amount of people that knew him wherever we traveled. His knowledge of Model T’s was endless.

A wonderful family man and friend to many that will...

Last post

While I never had the personal honor of knowing Dick, there are many in our local Rockford Model T chapter that remember him fondly. He was a frequent vendor at Little Hershey swap meet in Belvidere, and new almost everything about model T's and accessories. He will be sorely missed by many members of our Hobby. Condolences to his family and...

4 Replies

423 Views

Last post by 1925 Touring
Tue Jan 13, 2026 7:50 am
FS: Table Load Model T Goodies

Last post by Humblej « Tue Jan 13, 2026 7:35 am
Posted in Classifieds - Parts
Replies: 3
by George House » Mon Jan 12, 2026 4:01 pm » in Classifieds - Parts

First post

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

Last post

Email sent.

3 Replies

391 Views

Last post by Humblej
Tue Jan 13, 2026 7:35 am
'26 - '27 brake cam levers

Last post by Chad_Marcheese « Tue Jan 13, 2026 5:33 am
Posted in General Discussion Forum
Replies: 3
by Chad_Marcheese » Mon Jan 12, 2026 8:01 pm » in General Discussion Forum

First post

Are the brake cam levers for a '26-'27 the same left and right?
I know the cams are different for each side.
Thank you

Last post

Thank You Mike and Mark. That's what I was hoping you'd say.

3 Replies

130 Views

Last post by Chad_Marcheese
Tue Jan 13, 2026 5:33 am
A very nicely appointed Model C

Last post by Rob « Tue Jan 13, 2026 4:11 am
Posted in Early Ford Forum - pre-T
Replies: 2
by Rob » Mon Jan 12, 2026 9:29 pm » in Early Ford Forum - pre-T

First post

Thank you Bill C. and Bill A. for this very nice photo of a 1905 side entrance Model C with lots of extras. C 3.tiff

In color:

IMG_2899.jpeg

Last post

Great catch. I had not noticed that, nor seen it before either.

2 Replies

53 Views

Last post by Rob
Tue Jan 13, 2026 4:11 am
FS Ford TT 4069 Tire Iron SOLD

Last post by Charlie_26_TT_Ccab « Mon Jan 12, 2026 11:57 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Mon Jan 12, 2026 8:37 pm » in Classifieds - Parts

First post

For Sale is an original Ton Truck Tire Iron supplied by Ford for Ton Truck rear tire changes. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Email sent.

1 Replies

170 Views

Last post by Charlie_26_TT_Ccab
Mon Jan 12, 2026 11:57 pm
FS Ford U-Joint Entering Tool 5Z-196 SOLD

Last post by Bill Everett « Mon Jan 12, 2026 11:48 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Mon Jan 12, 2026 8:14 pm » in Classifieds - Parts

First post

For Sale is an original Ford 5Z-196 U-Joint installation tool. It is used to turn the u-joint allowing it to be installed into the back of the engine. SOLD plus shipping Lang’s 1-800-872-7871

Last post

E-Mail sent.

1 Replies

231 Views

Last post by Bill Everett
Mon Jan 12, 2026 11:48 pm
Getting Rattles Back On The Road

Last post by Mopar_man « Mon Jan 12, 2026 11:20 pm
Posted in General Discussion Forum
Replies: 610
by Mopar_man » Sat Jan 04, 2020 6:34 pm » in General Discussion Forum
1

…

3

4

5

6

7
First post

So about 3 and a half years ago my wife found a 1926 Touring for sale in the local paper. I went to look at the car and bought it. The guy showed me a video of the car running form the previous year. He said the the Clutch was stuck and that was why the rear wheel was now not moving. As I took a better look at it when I got it home I found that...

Last post

The small metal plugs are used on the rear axle housing where the aluminum cap goes. There is a small hole that allows the sleeve dimple to seat into. They go into those holes, one on each side. When installed they will make a good surface for the aluminum cap (O-ring) to seal against.

Thanks so much Don. For the parts as well. I've got the...
610 Replies

362756 Views

Last post by Mopar_man
Mon Jan 12, 2026 11:20 pm
Fairbanks screw press

Last post by Mark Chaffin « Mon Jan 12, 2026 10:56 pm
Posted in Classifieds - Parts
Replies: 4
by RGould1910 » Mon Jan 12, 2026 11:14 am » in Classifieds - Parts

First post

Same press as illustrated throughout the Ford Service Manual. Smooth action, no thread wear. Local pick up. $750. Will sell stand with press only. Negotiable. Contact me by email through the website and leave your contact info
Richard Gould
20260112_074942.jpg 20260112_075840.jpg
20240315_112718.jpg
20260112_092541.jpg

Last post

Yes. It is exactly the same tool as dad's. Probably the most useful of them all. Very rare and hard to find. Well worth the asking price.

4 Replies

409 Views

Last post by Mark Chaffin
Mon Jan 12, 2026 10:56 pm
FS Original Accessory Picnic Set in Case $200.00

Last post by Tparts « Mon Jan 12, 2026 9:12 pm
Posted in Classifieds - Parts

by Tparts » Mon Jan 12, 2026 9:12 pm » in Classifieds - Parts

For Sale is an original “Icy Hot” Picnic Set with suitcase. There are 4 plates, knives, forks, and spoons. Unfortunately the Thermos is missing. $200.00 plus shipping. Lang’s 1-800-872-7871

0 Replies

195 Views

Last post by Tparts
Mon Jan 12, 2026 9:12 pm
FS 1909-11 Original Hood Hooks $100.00

Last post by Tparts « Mon Jan 12, 2026 8:51 pm
Posted in Classifieds - Parts

by Tparts » Mon Jan 12, 2026 8:51 pm » in Classifieds - Parts

For Sale are a set of 4 original hood hold downs. 2 have very little wear with factory numbers. Please inspect the photos for the condition of each. $100.00 for the set of 4. Lang’s 1-800-872-7871

0 Replies

167 Views

Last post by Tparts
Mon Jan 12, 2026 8:51 pm
Spot light

Last post by jawa « Mon Jan 12, 2026 8:40 pm
Posted in Classifieds - Parts

by jawa » Mon Jan 12, 2026 8:40 pm » in Classifieds - Parts

The overall height is 14 , 11 diameter and the lens needed looks to be about 9 1/4 . Would work great on a T fire truck. $225 plus shipping.

0 Replies

113 Views

Last post by jawa
Mon Jan 12, 2026 8:40 pm
Front spring gator

Last post by WorldChamp1914 « Mon Jan 12, 2026 8:37 pm
Posted in General Discussion Forum
Replies: 5
by WorldChamp1914 » Mon Jan 12, 2026 12:37 am » in General Discussion Forum

First post

Hi…..I can’t find a picture of one online, I think that they were made of canvas.

Last post

Thanks much!

5 Replies

306 Views

Last post by WorldChamp1914
Mon Jan 12, 2026 8:37 pm
FS Ford Rear Axle Pinion Nut Wrench 5Z-165 SOLD

Last post by Pep C Strebeck « Mon Jan 12, 2026 8:31 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Mon Jan 12, 2026 8:29 pm » in Classifieds - Parts

First post

For Sale is an original Ford 5Z-165 Rear axle Pinion Gear Nut T Wrench. SOLD plus Shipping Lang’s 1-800-872-7871

Last post

PM sent on wrench.

1 Replies

151 Views

Last post by Pep C Strebeck
Mon Jan 12, 2026 8:31 pm
Wanted One 1915-27 Electric Headlamp Rim In Poor Condition

Last post by J1MGOLDEN « Mon Jan 12, 2026 8:14 pm
Posted in Classifieds - Parts
Replies: 6
by ModelTWoods » Fri Jan 09, 2026 4:39 pm » in Classifieds - Parts

First post

Wanted: One 1915-27 electric headlamp rim in unusable condition. MUST have at least ONE usable bracket on backside with usable tabs. Rest of rim, unimportant, as I will cannibalize rim for one lens bracket. Willing to pay shipping. Contact me through this site's messenger.

Last post

I have a box of six or eight of those, I didn't know they were different.

Show me a photo and I''ll show you what I have in the box.

6 Replies

329 Views

Last post by J1MGOLDEN
Mon Jan 12, 2026 8:14 pm
FS Homemade Starter Bendex Head Puller $20.00

Last post by Tparts « Mon Jan 12, 2026 7:45 pm
Posted in Classifieds - Parts

by Tparts » Mon Jan 12, 2026 7:45 pm » in Classifieds - Parts

For Sale is a well made version of Fords 5Z-323. Original version not included. $20.00 plus shipping. Lang’s 1-800-872-7871

0 Replies

130 Views

Last post by Tparts
Mon Jan 12, 2026 7:45 pm
FS Starter Bendex Head Puller SOLD

Last post by Tparts « Mon Jan 12, 2026 7:35 pm
Posted in Classifieds - Parts

by Tparts » Mon Jan 12, 2026 7:35 pm » in Classifieds - Parts

For Sale is a Starter Bendex Head Puller. Marked with a Ford Script and 5Z-323. SOLD plus shipping. Lang’s 1-800-872-7871

0 Replies

115 Views

Last post by Tparts
Mon Jan 12, 2026 7:35 pm
Passing the torch.

Last post by Bills Auto Works « Mon Jan 12, 2026 6:36 pm
Posted in General Discussion Forum
Replies: 3
by Jack Putnam, in Ohio » Sun Jan 11, 2026 10:45 pm » in General Discussion Forum

First post

The time has come to pass the torch so to speak. I have taught my grandson the methods of babbitt pouring of model T main bearings and the procedure of boring and align reaming the bearings. I have been doing babbitt work for 40 years, but the time has come to share the knowledge with a younger person.

Last post

Hi Jack,

That is awesome! Always nice to hear one of the younger generation is interested.

There are times when I wish i would have had kids so I could pass down stuff too as my Dad did to me (he was a mechanic at a GMC dealership all the years I was growing up), but it was not in the cards.

God Bless & Happy New Year
Bill

3 Replies

409 Views

Last post by Bills Auto Works
Mon Jan 12, 2026 6:36 pm
1923 Engine with free delivery to Luray Swap meet

Last post by G.ARMS86 « Mon Jan 12, 2026 5:52 pm
Posted in Classifieds - Parts
Replies: 7
by G.ARMS86 » Wed Jul 23, 2025 9:50 pm » in Classifieds - Parts

First post

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

Last post

Back to top

7 Replies

2281 Views

Last post by G.ARMS86
Mon Jan 12, 2026 5:52 pm
6volt alt with a 8 volt battery

Last post by Original Smith « Mon Jan 12, 2026 5:26 pm
Posted in General Discussion Forum
Replies: 3
by Schweck1914 » Thu Jan 08, 2026 10:24 am » in General Discussion Forum

First post

Will a 6 volt alternator putting out 40 amps charge a 8 volt battery...

Last post

Keep it original! A good 6volt system is hard to beat if you have good wiring, and a good battery

3 Replies

277 Views

Last post by Original Smith
Mon Jan 12, 2026 5:26 pm
Side mount on a ‘25 pickup

Last post by Original Smith « Mon Jan 12, 2026 5:08 pm
Posted in General Discussion Forum
Replies: 11
by hull 433 » Sat Jan 10, 2026 11:42 am » in General Discussion Forum

First post

“Original” Smith just installed a side-mounted spare on his 1925 roadster pickup. Looks sharp, almost sporting - and really changes the look of the car.

Last post

The first photos were posted because I don't know how to post a photo from my cell phone. This carrier was purchased by me many years ago. I restored it and hung it in the garage for several years. I decided to put it on finally and the photos show the result. This is an original aftermarket tire carrier that uses the original Ford carrier in the...

11 Replies

442 Views

Last post by Original Smith
Mon Jan 12, 2026 5:08 pm
Cocoa Mat

Last post by Allan « Mon Jan 12, 2026 4:36 pm
Posted in General Discussion Forum
Replies: 5
by Russ_Furstnow » Mon Jan 12, 2026 9:40 am » in General Discussion Forum

First post

I was in a local IKEA store and noticed they had cocoa floor mats for sale. The mats are perfect for the rear floor of 1910-1916 touring cars and are very reasonably priced. They are large enough so that they can be trimmed and fitted to the floor and look to be durable and nicely made. If you need a correct looking rear mat, this may be the...

Last post

The way they are made today allows for trimming. In the era of the T the mats were likely thicker and the fibre punched into a woven backing. That means the mat would fray to pieces if the backing was cut. They had to be made to size,

Thanks for the lead Russ. We have Ikea here too, so they should be available to us.

Allan from down under.

5 Replies

330 Views

Last post by Allan
Mon Jan 12, 2026 4:36 pm
A few new Wizard/Simmons/Duplex parts coming in the Spring

Last post by Scott_Conger « Mon Jan 12, 2026 3:27 pm
Posted in Classifieds - Parts
Replies: 1
by Scott_Conger » Wed Dec 31, 2025 4:54 pm » in Classifieds - Parts

First post

Response to my query recently was so bad that I am not planning on many parts, yet there was one fellow who seemed excited about the prospect, so I decided to proceed with a VERY small number of parts (like 4 or 5 each and that's it...)

I finished up a couple and will do the rest in the spring time

If you're interested in either needles or...

Last post

In 2 weeks, only 3 people have expressed any interest, solidifying my position that demand is statistically pretty much non-existent.

This is your one last chance to get on the list for a very limited number of parts.

If interested, EMAIL ME

thank you

1 Replies

332 Views

Last post by Scott_Conger
Mon Jan 12, 2026 3:27 pm
FS: EKERN Rear Axle Emergency Repair Fixture (1909-1925)

Last post by RajoRacer « Mon Jan 12, 2026 3:00 pm
Posted in Classifieds - Parts
Replies: 3
by WaltM » Fri Nov 07, 2025 2:14 pm » in Classifieds - Parts

First post

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

Last post

It's in his ad.

3 Replies

508 Views

Last post by RajoRacer
Mon Jan 12, 2026 3:00 pm
FS 1923-25 TOURING TOP SOCKETS

Last post by got10carz « Mon Jan 12, 2026 2:05 pm
Posted in Classifieds - Parts

by got10carz » Mon Jan 12, 2026 2:05 pm » in Classifieds - Parts

For Sale, nice looking touring 23- 25 top sockets. $250. Call for more pictures. Steve 701 212 5009

0 Replies

112 Views

Last post by got10carz
Mon Jan 12, 2026 2:05 pm
FS: EKERN Emergency Rear Axle Fixture (1909-1927)

Last post by WaltM « Mon Jan 12, 2026 1:55 pm
Posted in Classifieds - Parts

by WaltM » Mon Jan 12, 2026 1:55 pm » in Classifieds - Parts

For sale EKERN emergency rear axle fixture. Axle rotates smoothly. Grease cup is filled with synthetic grease for long life. Threads are in good shape. Used as a temporary fix to get you home after an axle break. Price $150. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

136 Views

Last post by WaltM
Mon Jan 12, 2026 1:55 pm
FS Accessory RB Toolbox w/brass hasp SOLD

Last post by slang250 « Mon Jan 12, 2026 1:52 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Thu Jan 08, 2026 7:20 pm » in Classifieds - Parts

First post

For Sale is a dainty toolbox that would be mounted on the running board or body. Hasp is Brass and the box is very solid. There are some extra holes by the hasp as shown in the photos. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Tool box has been sold.

2 Replies

392 Views

Last post by slang250
Mon Jan 12, 2026 1:52 pm
Wizard or Simmons flapper

Last post by Harley_97 « Mon Jan 12, 2026 1:40 pm
Posted in General Discussion Forum
Replies: 17
by Harley_97 » Mon Mar 24, 2025 6:10 pm » in General Discussion Forum

First post

It's been 11 years ago that posted looking for information to identify a carburetor. Turned out to be a Wizard or Simmons, no markings on it.

Since then that carburetor has been sitting on the shelf collecting dust. I'm now retired and thought I would take a shot at bringing it back to life.
The two things needed for it are the flapper and the...

Last post

Well, I think it's time to complete my story on my attempt to make a flapper for my Wizard / Simmons carburetor. I also needed a spray nozzle / jet, so I contacted both Corey W and Scott C, Scott didn't have enough demand to go into production of the spray nozzle / jet. Corey couldn't help me with the flapper, but he did give me the overall...

17 Replies

2755 Views

Last post by Harley_97
Mon Jan 12, 2026 1:40 pm
Gear casing cracked ford model s

Last post by Jerry VanOoteghem « Mon Jan 12, 2026 1:17 pm
Posted in Early Ford Forum - pre-T
Replies: 2
by Gerard_tt_ford » Sun Jan 11, 2026 6:31 pm » in Early Ford Forum - pre-T

First post

Hello all during rebuild of the gearbox i discovered the gear casing is cracked at the pin of the triple gear, does someone tried to repair this or does someone has one used for sale and eventually also a set of triple gears

Last post

Mine had some cracks as well. I took it to a welding shop that was located across the street from the former Ford Highland Park Plant, (seemed fitting). I handed it to the guy and said, This is from a 1907 Ford Model N. He snapped back and said he knew what the hell it was. I should have known that he might, the transmission drum was about 96...

2 Replies

99 Views

Last post by Jerry VanOoteghem
Mon Jan 12, 2026 1:17 pm
WTB Weber Cast Iron Wheel dollies

Last post by BobP « Mon Jan 12, 2026 12:32 pm
Posted in General Discussion Forum
Replies: 5
by BobP » Thu Jan 08, 2026 6:24 pm » in General Discussion Forum

First post

Looking to buy 1 or more Weber 1910 wheel dollies. I have 3, looking to fill out the set and more would be great. Look at the pictures. I want a set for my unrestored 1911 open runabout. Thanks, Bob, 507 458 6778.

Last post

bttttttttttttttttt

5 Replies

357 Views

Last post by BobP
Mon Jan 12, 2026 12:32 pm
WTB Weber Cast Iron Wheel dollies

Last post by BobP « Mon Jan 12, 2026 12:31 pm
Posted in Classifieds - Parts
Replies: 3
by BobP » Thu Jan 08, 2026 6:03 pm » in Classifieds - Parts

First post

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

Last post

btttttttttttttttt

3 Replies

240 Views

Last post by BobP
Mon Jan 12, 2026 12:31 pm
Original Main bearing bolts and nuts FS Lower Price !

Last post by Ruxstel24 « Mon Jan 12, 2026 12:19 pm
Posted in Classifieds - Parts
Replies: 1
by Ruxstel24 » Wed Jan 07, 2026 3:23 pm » in Classifieds - Parts

First post

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

Last post

Drop to $45 per set including shipping USA 48

1 Replies

206 Views

Last post by Ruxstel24
Mon Jan 12, 2026 12:19 pm
Engine mount repair brackets FS

Last post by Ruxstel24 « Mon Jan 12, 2026 12:18 pm
Posted in Classifieds - Parts
Replies: 4
by Ruxstel24 » Wed Jan 07, 2026 1:06 pm » in Classifieds - Parts

First post

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

Last post

I will sell separate except for the pair

4 Replies

243 Views

Last post by Ruxstel24
Mon Jan 12, 2026 12:18 pm
Horn buttons FS Lower price !

Last post by Ruxstel24 « Mon Jan 12, 2026 12:17 pm
Posted in Classifieds - Parts
Replies: 3
by Ruxstel24 » Fri Dec 26, 2025 12:52 pm » in Classifieds - Parts

First post

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

Last post

TTT please !

3 Replies

403 Views

Last post by Ruxstel24
Mon Jan 12, 2026 12:17 pm
DUNN counterweights FS Lower price !

Last post by Ruxstel24 « Mon Jan 12, 2026 12:16 pm
Posted in Classifieds - Parts
Replies: 2
by Ruxstel24 » Mon Dec 29, 2025 9:34 am » in Classifieds - Parts

First post

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

Last post

TTT please !

2 Replies

322 Views

Last post by Ruxstel24
Mon Jan 12, 2026 12:16 pm
FS: Large 3 Tier Black/Brass Cowl Lamp

Last post by George House « Mon Jan 12, 2026 11:52 am
Posted in Classifieds - Parts
Replies: 1
by George House » Fri Jan 09, 2026 4:46 pm » in Classifieds - Parts

First post

No name. Beautiful brass & glass. No cracks or dents. Has burner. Entire chimney nickel plated brass as is entire font
Beautiful multifaceted glass in rear. Only $110 + the ride.
gwhouse731(at)gmail(dot)com

Last post

**price reduced**

1 Replies

180 Views

Last post by George House
Mon Jan 12, 2026 11:52 am
FS: Excellent E&J Black/Brass Taillamp

Last post by George House « Mon Jan 12, 2026 11:51 am
Posted in Classifieds - Parts
Replies: 1
by George House » Fri Jan 09, 2026 4:55 pm » in Classifieds - Parts

First post

Pat’ Dec 9, 1908…Original paint and perfect condition. Complete. No cracks in glass or brass. Believe for 1913-1914 Ford. Only $180 + shipping.
gwhouse731(at)gmail(dot)com. First caller gets it

Last post

**price reduced**

1 Replies

192 Views

Last post by George House
Mon Jan 12, 2026 11:51 am
Follow up on no reverse

Last post by speedytinc « Mon Jan 12, 2026 11:35 am
Posted in General Discussion Forum
Replies: 4
by Reno Speedster » Sun Jan 11, 2026 5:28 pm » in General Discussion Forum

First post

When I was putting the 22 into the garage for the winter, I couldn’t back it up my very low slope driveway. I had a bunch of things to do before I could get into it to find out what was up. I took the transmission cover off today and I can’t see anything wrong. The triple gears look fine, the drum shows no sign of heating or cracking, and what...

Last post

I have a friend that had the same trouble with his speedster. All of a sudden, he had no reverse at all! We took the engine out of the car, checked the transmission and found that the rivets that attach the drum to the gear on reverse drum had sheared. The only solution was to re-rivet the drum to the gear or install a better reverse drum with the...

4 Replies

297 Views

Last post by speedytinc
Mon Jan 12, 2026 11:35 am
New use for T parts

Last post by TXGOAT2 « Mon Jan 12, 2026 10:45 am
Posted in OT - Off topic
Replies: 1
by Dan Hatch » Mon Jan 12, 2026 10:26 am » in OT - Off topic

First post

My “good neighbor “ the land developer tried to destroy my property corner post with his water runoff “project “.
So I used an old school patch job.
IMG_5221.jpeg

Last post

A good neighbor lives ten miles down the road. A great neighbor lives 20 miles down the road.

1 Replies

94 Views

Last post by TXGOAT2
Mon Jan 12, 2026 10:45 am
(SOLD) Stevens Spindle Bushing Re-facer

Last post by WaltM « Mon Jan 12, 2026 10:04 am
Posted in Classifieds - Parts

by WaltM » Mon Jan 12, 2026 10:04 am » in Classifieds - Parts

SOLD Stevens spindle bushing re-facer. Marked STEVENS NO. T-290 . Threads are in good shape. Price $285. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

189 Views

Last post by WaltM
Mon Jan 12, 2026 10:04 am
(SOLD)Stevens Drive Shaft Sleeve Puller

Last post by WaltM « Mon Jan 12, 2026 9:56 am
Posted in Classifieds - Parts

by WaltM » Mon Jan 12, 2026 9:56 am » in Classifieds - Parts

(SOLD) Stevens drive shaft sleeve puller. All threads are in good condition. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

150 Views

Last post by WaltM
Mon Jan 12, 2026 9:56 am
(SOLD) Stevens Piston Vise

Last post by WaltM « Mon Jan 12, 2026 9:51 am
Posted in Classifieds - Parts

by WaltM » Mon Jan 12, 2026 9:51 am » in Classifieds - Parts

(SOLD) Stevens piston vise. Good threads and jaws (lead). Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

165 Views

Last post by WaltM
Mon Jan 12, 2026 9:51 am
(SOLD) Stevens Generator Gear Puller

Last post by WaltM « Mon Jan 12, 2026 9:45 am
Posted in Classifieds - Parts

by WaltM » Mon Jan 12, 2026 9:45 am » in Classifieds - Parts

(SOLD) Stevens generator gear puller. Good threads. Price $165 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

131 Views

Last post by WaltM
Mon Jan 12, 2026 9:45 am
True Fire set up

Last post by Wingnut « Mon Jan 12, 2026 9:03 am
Posted in Classifieds - Parts
Replies: 2
by Wingnut » Fri Jan 09, 2026 6:35 pm » in Classifieds - Parts

First post

Got this with a car we bought, don't need it, I'm asking $300 it is all there plug and play if you will. interested can text me at three three zero 2four1 two6four 1.

Last post

True Fire going to Peter, thanks MTFCA... Wingnut

2 Replies

380 Views

Last post by Wingnut
Mon Jan 12, 2026 9:03 am
1928 Chevy Head Adapter?

Last post by Dodge « Mon Jan 12, 2026 1:13 am
Posted in General Discussion Forum
Replies: 1
by drzomber » Sun Jan 11, 2026 11:41 pm » in General Discussion Forum

First post

I recently dumped the pan for the first time on my T only to learn that the 'stock' engine I was promised actually has an A crank/ billet mains/ A rods/ and a big cam (you can imagine my surprise!)

Anyway, I think that the logical next thing to to is look into an OHV conversion. I'm too poor for a Rajo so the 1928 Chevy head seems like the...

Last post

Nice suprise.
I sent you a P.M. re: head

1 Replies

189 Views

Last post by Dodge
Mon Jan 12, 2026 1:13 am
Looking for Ideas (Rear Shocks mounting)

Last post by frontyboy « Mon Jan 12, 2026 1:07 am
Posted in General Discussion Forum
Replies: 6
by frontyboy » Sat Jan 10, 2026 3:40 pm » in General Discussion Forum

First post

Have a lowered 1913 Speedster project. Looking for different ways to mount a friction single lever shock to the rear axle.

I will mount the single lever friction shock parallel to the rear frame cross member.
These shocks have no name or markings. The shock has 2 rubber discs between the shock body and the adjustable tension lever. I am wondering...

Last post

I have seen some shock installs using a con rod on the axle tube. Any ideas on what con rod they used? I was told 289 Ford but not a good fit. So what is anyone else using? I prefer not to weld the con rod on the axle tube.

tnx
frontyboy.?

6 Replies

278 Views

Last post by frontyboy
Mon Jan 12, 2026 1:07 am
Warford Transmission Tailshaft Nut Tool

Last post by drzomber « Sun Jan 11, 2026 9:43 pm
Posted in Classifieds - Parts

by drzomber » Sun Jan 11, 2026 9:43 pm » in Classifieds - Parts

These are machined from 6061 aluminum and fit the back nut on an aluminum Warford transmission. $60.00 shipped!

You can DM me to purchase or get one at rawaequipped.com

IMG_2719.jpeg IMG_2718.jpeg IMG_2721.jpeg

0 Replies

173 Views

Last post by drzomber
Sun Jan 11, 2026 9:43 pm
Rebuilding 1912 Heinze Coils

Last post by Moxie26 « Sun Jan 11, 2026 9:13 pm
Posted in General Discussion Forum
Replies: 32
by Darren J Wallace » Sun Nov 30, 2025 2:18 pm » in General Discussion Forum

First post

While my hand heals from surgery, I’m slowly getting back into doing things. I started out this weekend by doing something small and light, and for myself. I’ve had an unrestored spare set of late 1912 Heinze ignition coils for my 1913 Canadian Ford. I decided to rebuild them. Since my car is a very unrestored cosmetically, but very well...

Last post

Darren ... Great rewarding work !

32 Replies

1729 Views

Last post by Moxie26
Sun Jan 11, 2026 9:13 pm
Slight miss and loss of power

Last post by Moxie26 « Sun Jan 11, 2026 9:04 pm
Posted in General Discussion Forum
Replies: 15
by David Payton » Sat Jan 10, 2026 5:47 pm » in General Discussion Forum

First post

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.

Last post

David .... Check your grocery list against the coupons you have.,.. makes a trip more exciting and your wife will smile.

15 Replies

282 Views

Last post by Moxie26
Sun Jan 11, 2026 9:04 pm
What have you done on an old non-Model T vehicle.

Last post by Mopar_man « Sun Jan 11, 2026 8:30 pm
Posted in OT - Off topic
Replies: 238
by Rich Eagle » Mon Mar 25, 2019 11:38 am » in OT - Off topic
1

2

3
First post

It became important for me to do something with the 1919 Harley-Davidson engine. The bike has been gaining in value and parts since the acquisition of a basket case in 1973. A total rebuild isn't an option for me at this time but I believe I can reassemble it and at least get all the parts in one place and maybe fire it up. One of the crank pin...

Last post

My Fuel pump left me on the side of the road. So my mechanic was home for winter break and she replaced it. The 69 Super Bee started right up.

IMG_9852.jpeg

IMG_9848.jpeg
238 Replies

125934 Views

Last post by Mopar_man
Sun Jan 11, 2026 8:30 pm
WTB Rear Wire Wheel, Hub, and Cap.

Last post by Tparts « Sun Jan 11, 2026 5:54 pm
Posted in Classifieds - Parts

by Tparts » Sun Jan 11, 2026 5:54 pm » in Classifieds - Parts

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

0 Replies

126 Views

Last post by Tparts
Sun Jan 11, 2026 5:54 pm
Bell Cranks NOS

Last post by Dan Hatch « Sun Jan 11, 2026 5:42 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sat Jan 10, 2026 2:04 pm » in Classifieds - Parts

First post

Here are some bell cranks that are Nos. See pictures. &10 each + shipping. Email me by forum. Dan
IMG_5133.jpeg

Last post

Have not gotten your email. Dan

3 Replies

458 Views

Last post by Dan Hatch
Sun Jan 11, 2026 5:42 pm
October 1913 Motor Free delivery to Luray Swap Meet)!

Last post by Tparts « Sun Jan 11, 2026 5:19 pm
Posted in Classifieds - Parts
Replies: 5
by Tparts » Thu Apr 24, 2025 3:15 pm » in Classifieds - Parts

First post

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

Last post

To the top

5 Replies

2339 Views

Last post by Tparts
Sun Jan 11, 2026 5:19 pm
FS 1915 Touring Tail Light/Lic Plate BKT $60.00

Last post by Tparts « Sun Jan 11, 2026 5:13 pm
Posted in Classifieds - Parts
Replies: 4
by Tparts » Thu Jan 01, 2026 5:37 pm » in Classifieds - Parts

First post

For Sale is an original 1915-early 16 Tail Light, License Plate Bracket in good condition. $60.00 plus shipping. Lang’s 1-800-872-7871

Last post

One more price decrease

4 Replies

528 Views

Last post by Tparts
Sun Jan 11, 2026 5:13 pm
How they showed up…..

Last post by John kuehn « Sun Jan 11, 2026 4:56 pm
Posted in General Discussion Forum
Replies: 23
by Dollisdad » Fri Jan 09, 2026 2:14 pm » in General Discussion Forum

First post

IMG_4789.jpeg IMG_4475.jpeg IMG_4413.jpeg IMG_4492.jpeg

Last post

There are enough parts to build up some good chassis to be sure. If you’re a tinkerer this is Model T Heaven. Model T Haven sold all parts they had. Could this be some of those or someone else’s. I’ll bet there are good rear axle Hyatt bearings in those rear ends.

Some nice Model T’s have been built up from worse parts than these.

23 Replies

904 Views

Last post by John kuehn
Sun Jan 11, 2026 4:56 pm
FS “New Gray 30 X 3-1/2 Universal Rib Tire $110.00

Last post by Tparts « Sun Jan 11, 2026 4:53 pm
Posted in Classifieds - Parts
Replies: 6
by Tparts » Wed Dec 10, 2025 5:02 pm » in Classifieds - Parts

First post

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $110.00 plus shipping. Lang’s 1-800-872-7871

Last post

Drop price again

6 Replies

692 Views

Last post by Tparts
Sun Jan 11, 2026 4:53 pm
FS Accessory Fan Blade $25.00

Last post by Tparts « Sun Jan 11, 2026 4:48 pm
Posted in Classifieds - Parts
Replies: 7
by Tparts » Thu Jan 01, 2026 9:23 pm » in Classifieds - Parts

First post

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $25.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

7 Replies

708 Views

Last post by Tparts
Sun Jan 11, 2026 4:48 pm
FS New All Gray 30 x 3 Non Skid Firestone Tire $135.00

Last post by Tparts « Sun Jan 11, 2026 4:47 pm
Posted in Classifieds - Parts
Replies: 6
by Tparts » Wed Dec 10, 2025 4:34 pm » in Classifieds - Parts

First post

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$135.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

6 Replies

641 Views

Last post by Tparts
Sun Jan 11, 2026 4:47 pm
FS RARE Kingston “6 Ball” Carburetor, $1500.00

Last post by Tparts « Sun Jan 11, 2026 4:40 pm
Posted in Classifieds - Parts
Replies: 12
by Tparts » Mon Oct 27, 2025 10:31 pm » in Classifieds - Parts

First post

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $1500.00 plus shipping.
Lang’s 1-800-872-7871

Last post

Incredibly rare

12 Replies

1802 Views

Last post by Tparts
Sun Jan 11, 2026 4:40 pm
FS “FRONTY” Script for the Radiator $49.95

Last post by Tparts « Sun Jan 11, 2026 4:38 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Thu Jan 08, 2026 7:12 pm » in Classifieds - Parts

First post

For Sale are “Fronty” Script that mounts to the radiator core. Mounting hardware is NOT included. Available in solid brass or stainless. $49.95 plus shipping Lang’s 1-800-872-7871

Last post

To the top

1 Replies

260 Views

Last post by Tparts
Sun Jan 11, 2026 4:38 pm
FS 1911-12 “Ford” Transmission Cover Door $150.00

Last post by Tparts « Sun Jan 11, 2026 4:35 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Wed Jan 07, 2026 10:09 pm » in Classifieds - Parts

First post

For Sale is a very nice “Ford Script” Transmission Door for late 1911-1912 tapered transmission cover. It is in excellent condition with no pitting and a very crisp script. It has been glass beaded. $150.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

1 Replies

288 Views

Last post by Tparts
Sun Jan 11, 2026 4:35 pm
FS: Early Front Spring Clip/ Motor Mount

Last post by George House « Sun Jan 11, 2026 4:30 pm
Posted in Classifieds - Parts

by George House » Sun Jan 11, 2026 4:30 pm » in Classifieds - Parts

Only $60 + USPS flat rate small. Another sandblasted recently sold here for $100. All threads used tap or dies already and in good condition.
gwhouse731(at)gmail(dot)com

0 Replies

79 Views

Last post by George House
Sun Jan 11, 2026 4:30 pm
FS Accessory Anti-Theft Device $85.00

Last post by Tparts « Sun Jan 11, 2026 4:29 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Wed Jan 07, 2026 10:23 pm » in Classifieds - Parts

First post

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $85.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

2 Replies

304 Views

Last post by Tparts
Sun Jan 11, 2026 4:29 pm
FS 1910-13 2pc Driveshaft Housing $700.00

Last post by Tparts « Sun Jan 11, 2026 4:25 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Thu Jan 08, 2026 6:59 pm » in Classifieds - Parts

First post

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. $700.00 plus shipping Lang’s 1-800-872-7871

Last post

Price decrease

2 Replies

256 Views

Last post by Tparts
Sun Jan 11, 2026 4:25 pm
Generator issues

Last post by J1MGOLDEN « Sun Jan 11, 2026 3:31 pm
Posted in General Discussion Forum
Replies: 19
by Dave1 » Wed Jan 07, 2026 6:49 pm » in General Discussion Forum

First post

26 generator was functioning in the car.
On this car I have rebuilt the drive train, so I thought it would be a good idea to go over the starter and generator.
The previous owner had gone through the generator as it has a new insulated brush plate. The field coils are not new, however they are not grounded . Checked the armature on a growler,...

Last post

Andre, my tester is a little simpler.

19 Replies

432 Views

Last post by J1MGOLDEN
Sun Jan 11, 2026 3:31 pm
WTD top hood

Last post by andrew o sullivan « Sun Jan 11, 2026 2:51 pm
Posted in Classifieds - Parts

by andrew o sullivan » Sun Jan 11, 2026 2:51 pm » in Classifieds - Parts

WTD looking for used ,top for 1913 touring car. i have a real nice car very original car i have a new top but id like a good used one that i can fit to the car, if i put the new one on it might ,not, look right .

0 Replies

89 Views

Last post by andrew o sullivan
Sun Jan 11, 2026 2:51 pm
FS - Rebuilt - /- ECCT Calibrated Ignition Coil Sets.... SOLD

Last post by Moxie26 « Sun Jan 11, 2026 2:51 pm
Posted in Classifieds - Parts
Replies: 23
by Moxie26 » Mon Sep 08, 2025 6:26 pm » in Classifieds - Parts

First post

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

Last post

All offered sets of rebuilt coils have been SOLD . ...along with two other sets that I had stored for my own use. Just an up-date, still accepting for evaluation and calibration.

23 Replies

3402 Views

Last post by Moxie26
Sun Jan 11, 2026 2:51 pm
Wanted Rajo B,BB,BBR single inlet updraft manifold with water tube

Last post by big2bird « Sun Jan 11, 2026 2:19 pm
Posted in Classifieds - Parts
Replies: 4
by Mark Herdman » Thu Sep 12, 2024 11:54 pm » in Classifieds - Parts

First post

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Last post

Look at the bright side. As soon as you fabricate one, you'll find one.😄

4 Replies

1191 Views

Last post by big2bird
Sun Jan 11, 2026 2:19 pm
Kingston 4-ball carburetor

Last post by Corey Walker « Sun Jan 11, 2026 2:13 pm
Posted in Classifieds - Parts
Replies: 2
by Corey Walker » Wed Jan 07, 2026 2:42 pm » in Classifieds - Parts

First post

Completely disassembled and cleaned, viton tipped needle and seat conversion, little to no wear on throttle shaft with bushings installed top and bottom, new choke spring, reconditioned spray needle, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

2 Replies

181 Views

Last post by Corey Walker
Sun Jan 11, 2026 2:13 pm
Ford NRS transmission project

Last post by Gerard_tt_ford « Sun Jan 11, 2026 1:07 pm
Posted in Early Ford Forum - pre-T
Replies: 3
by greenacres36 » Wed Oct 15, 2025 8:52 pm » in Early Ford Forum - pre-T

First post

I’ve been making new transmission drums for a little while. I’ve made a sample main shaft and now i’m considering making gear sets for the transmissions. I started by making one triple gear to see if I could do it. I think I’m going to try to make a full set and have them heat treated.

Last post

I may be interested in a set. Please keep me updated if it is succesfull.

3 Replies

605 Views

Last post by Gerard_tt_ford
Sun Jan 11, 2026 1:07 pm
WTB - 1926/27 Hubs and Wood Wheels

Last post by South Park Zephyr « Sun Jan 11, 2026 12:58 pm
Posted in Classifieds - Parts
Replies: 1
by cijames5380 » Sun Jan 11, 2026 11:54 am » in Classifieds - Parts

First post

Hi, Looking to buy a full set of good 26/27 Wood Wheels and Hubs. Happy to pay for shipping to Chicago.

Thanks

Last post

I have a set in St. Louis
Scott

1 Replies

99 Views

Last post by South Park Zephyr
Sun Jan 11, 2026 12:58 pm
Slight miss and loss of power

Last post by TFan « Sun Jan 11, 2026 10:45 am
Posted in General Discussion Forum
Replies: 3
by David Payton » Sat Jan 10, 2026 5:51 pm » in General Discussion Forum

First post

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.
I was hoping to post a short video of the fuel vapor coming...

Last post

Thanks Mike, I found that out when I got further down the listings. Jim

3 Replies

160 Views

Last post by TFan
Sun Jan 11, 2026 10:45 am
1913 runabout body

Last post by michaelb2296 « Sun Jan 11, 2026 10:21 am
Posted in General Discussion Forum
Replies: 92
by Don ellis » Wed Apr 20, 2022 6:11 pm » in General Discussion Forum

First post

Asking for a friend If a fellow was to find an all original 13 runabout actual barn find what would you think the body would be worth? It has a little rust through in one corner but the wood and everything else seems solid. I'm trying to work a deal and It's taken apart. I will probably part it out. What do you guys think?

Last post

Continuous improvements:

imagejpeg_1.jpeg

Better:

IMG_1932.jpeg
IMG_1933.jpeg

92 Replies

16066 Views

Last post by michaelb2296
Sun Jan 11, 2026 10:21 am
What have you done with your Model T in January 2026

Last post by Mike Silbert « Sun Jan 11, 2026 8:37 am
Posted in General Discussion Forum
Replies: 3
by KBurket » Sun Jan 04, 2026 10:55 pm » in General Discussion Forum

First post

My 1926 Roadster Pickup is 100 years old this month.
I drove it to the beach then drove it home in the rain.
IMG_8189.jpeg

Last post

While I keep getting distracted (like normal) I have made some progress getting engines ready to reassemble.

Mike
Screenshot 2026-01-11 083504.jpg

3 Replies

339 Views

Last post by Mike Silbert
Sun Jan 11, 2026 8:37 am
The 2026 BAKERSFIELD SWAP MEET is looking for new leadership.

Last post by KimDobbins « Sun Jan 11, 2026 2:02 am
Posted in General Discussion Forum
Replies: 10
by NorthSouth » Sun Nov 23, 2025 10:46 am » in General Discussion Forum

First post

-

Jan 9, 2026

Dear 2026 Bakersfield Swap Meet vendors and attendees,

For personal and practical reasons, it has been formally decided that I will no longer be spearheading the 2026 Bakersfield Brass Era/ PreWar Swap Meet. Therefore, all vendor fees received thus far, or by me in the future, will be returned via the self addressed stamped...

Last post

It would be great to see the national and local HCCA get behind this meet and give it ongoing support. Thanks Steven for your support past and present. I sure hope this meet will continue for the good of our hobby.

10 Replies

1280 Views

Last post by KimDobbins
Sun Jan 11, 2026 2:02 am
FS Ford script oil can an holder

Last post by YellowTRacer « Sun Jan 11, 2026 1:16 am
Posted in Classifieds - Parts

by YellowTRacer » Sun Jan 11, 2026 1:16 am » in Classifieds - Parts

No dents original Ford script oil can and holder. Real nice condition. You won't find a better one. Price drop $125.00 plus shipping.

Ed aka #4

0 Replies

180 Views

Last post by YellowTRacer
Sun Jan 11, 2026 1:16 am
FS Original coil tester

Last post by YellowTRacer « Sun Jan 11, 2026 1:05 am
Posted in Classifieds - Parts

by YellowTRacer » Sun Jan 11, 2026 1:05 am » in Classifieds - Parts

Model T Ford coil tester. this is a rare nice original oak varnished wood coil tester. Big price drop $150.00. plus shipping. I definitely want to sell it.

0 Replies

173 Views

Last post by YellowTRacer
Sun Jan 11, 2026 1:05 am
Magneto

Last post by Oldrusty26 « Sat Jan 10, 2026 10:36 pm
Posted in General Discussion Forum
Replies: 9
by Oldrusty26 » Fri Jan 09, 2026 11:02 am » in General Discussion Forum

First post

Another question for the team, when recharging the magnets on a magneto in the car, do you have to touch each magnet individually or just at the mag post? i’m working on a 1925. I have the hogs head off to inspect the coil rings. Everything looks good but the mags are weak. I was planning on doing the flash charge with a DC welder.
Thank you

Last post

Very good advice !! I will definitely clean up the area before moving forward , I pulled this unit out of a barn quite a few years ago and am looking forward to getting it back together . They are the two piece valves , the whole thing needs cleaned up and out .

9 Replies

419 Views

Last post by Oldrusty26
Sat Jan 10, 2026 10:36 pm
Please identify this wire wheel

Last post by Mark Herdman « Sat Jan 10, 2026 10:04 pm
Posted in General Discussion Forum
Replies: 13
by Tparts » Tue Jan 06, 2026 1:56 pm » in General Discussion Forum

First post

Looking for information on the manufacturer of these wheels. They have an odd tapered hubcap.

Last post

I had some rough ones of these but unfortunately sold to someone to make a set some time ago.

322347 16-02-2009 American Welding Company Wire Wheels.jpg

322351 16-02-2009 American Welding Company Wire Wheels.jpg

322352 16-02-2009 American Welding Company Wire Wheels.jpg

322353 16-02-2009 American Welding Company Wire Wheels.jpg...

13 Replies

864 Views

Last post by Mark Herdman
Sat Jan 10, 2026 10:04 pm
FS SPARKPLUGS SOLD

Last post by Joe Voller « Sat Jan 10, 2026 9:31 pm
Posted in Classifieds - Parts
Replies: 5
by Tinner12 » Sat Dec 27, 2025 8:26 am » in Classifieds - Parts

First post

ASSORTMENT OF USED SPARK plugs plus parts shipping included domestic

Last post

Got the plugs, thank you. got the plugs before you got my check i am sure. Its wonderful that we are a trust-able bunch.

5 Replies

631 Views

Last post by Joe Voller
Sat Jan 10, 2026 9:31 pm
Windshield frame Cones FS

Last post by Shannon_in_Texas « Sat Jan 10, 2026 7:56 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sat Jan 10, 2026 2:02 pm » in Classifieds - Parts

First post

Here is a set of Windshield cones nuts snd filler blocks. Maybe NOS not sure. Blocks are. $35 + shipping. Email me by forum. Dan
IMG_5146.jpeg
IMG_5147.jpeg

Last post

Email sent— thanks!

1 Replies

220 Views

Last post by Shannon_in_Texas
Sat Jan 10, 2026 7:56 pm
Windshield filler NOS FS

Last post by Shannon_in_Texas « Sat Jan 10, 2026 7:56 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Sat Jan 10, 2026 1:56 pm » in Classifieds - Parts

First post

Here are a pair of windshield filler plugs for lower frame 23/25 open car. Part number 7803brx. This is the piece that goes in the end of windshield frame so the cap can fasten on and the frame can be bolted to the uprights. When was last time you saw a pair of them NOS? $15 for pair + shipping. Email me by forum. Dan
IMG_5126.jpeg...

Last post

Email sent— thanks!

1 Replies

201 Views

Last post by Shannon_in_Texas
Sat Jan 10, 2026 7:56 pm
Rebuilt ECCT calibrated Coils..... SOLD

Last post by Moxie26 « Sat Jan 10, 2026 6:52 pm
Posted in Classifieds - Parts
Replies: 7
by Moxie26 » Wed Dec 17, 2025 6:29 pm » in Classifieds - Parts

First post

This is the last set I have available this year. This is an outright sale of 4 coil cores with new replacement orange drop condensers, new KW style point sets, ECCT calibrated for equal firing time. .... $425.00 USA shipping included.

Last post

Payment received today, will ship on Monday. Thank you very much and enjoy!

7 Replies

728 Views

Last post by Moxie26
Sat Jan 10, 2026 6:52 pm
Sold! Nice Original Brass Radiator

Last post by GGZ « Sat Jan 10, 2026 6:06 pm
Posted in Classifieds - Parts
Replies: 8
by GGZ » Thu Jan 08, 2026 2:09 pm » in Classifieds - Parts

First post

Sold! This is a really nice original radiator. Barn find. Actually from a garage full of neat stuff. It has the wire tube on the rear of the core. The stamp on the rear is #1106703. The tank below the neck area is slightly pushed in but it could be easily pushed out. The fins are good throughout. The neck is good. Both the water inlet and outlet...

Last post

Sold to Chicago! Thanks MTFCA!

8 Replies

770 Views

Last post by GGZ
Sat Jan 10, 2026 6:06 pm
Avoid scammers. Don't post personal info!

Last post by drzomber « Sat Jan 10, 2026 4:31 pm
Posted in Classifieds - Parts
Replies: 12
by AdminJeff » Wed Sep 18, 2024 8:20 pm » in Classifieds - Parts

First post

To Avoid scammers, Don't post personal info! This includes your email address, & phone number.
Do so at your own risk.
It's better to communicate through the forum system.

AdminJeff

Last post

ModelTKeith, keithbrouhard@gmail.com

Same! He's apparently making the rounds.

12 Replies

15221 Views

Last post by drzomber
Sat Jan 10, 2026 4:31 pm
Information Wanted About Fastener Type

Last post by ModelTWoods « Sat Jan 10, 2026 4:24 pm
Posted in General Discussion Forum
Replies: 6
by ModelTWoods » Sat Jan 10, 2026 1:42 pm » in General Discussion Forum

First post

What is the proper name for the type of fastener that is commonly used with sheet metal screws in applications where a nut and bolt can't be used. they ware always made of spring steel and can be flat or slightly curved with different sizes for different size screws and applications, I loked at McMaster-Carr but didn't really know what to call...

Last post

Thanks to all who responded. Rectangular push nuts is what I was looking for.

6 Replies

229 Views

Last post by ModelTWoods
Sat Jan 10, 2026 4:24 pm
1912 Holley H1 carburetor

Last post by Corey Walker « Sat Jan 10, 2026 1:59 pm
Posted in Classifieds - Parts

by Corey Walker » Sat Jan 10, 2026 1:59 pm » in Classifieds - Parts

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

0 Replies

191 Views

Last post by Corey Walker
Sat Jan 10, 2026 1:59 pm
Gallivan Twin Overhead Cylinder Heads

Last post by TRDxB2 « Sat Jan 10, 2026 12:37 pm
Posted in General Discussion Forum
Replies: 29
by frontyboy » Mon Mar 10, 2025 11:50 pm » in General Discussion Forum

First post

I am trying to identify and collect Gallivan Cylinder head history, Known heads, owners, old racers, photographs, and any history.

I have a Gallivan Twin cam in my 1915 model t roadster. One of only 2 known to be in cars and running (there may be more?). Mine was found all apart in a dirt floor machine shop in Ballard a suburb of Seattle...

Last post

Maybe I missed it above but here the link to the Gallivan Documentary in the Museum of American Speed

29 Replies

4149 Views

Last post by TRDxB2
Sat Jan 10, 2026 12:37 pm
Ford model s main bearings

Last post by tumanj « Sat Jan 10, 2026 11:56 am
Posted in Early Ford Forum - pre-T
Replies: 7
by Gerard_tt_ford » Fri Dec 26, 2025 1:46 pm » in Early Ford Forum - pre-T

First post

I recently started working on the engine of my model s. The main bearings have to much play. In the manual i did see the babbitt bearing is a loose bearings is that the case? Can i just press a another bearing in de block? IMG-20251223-WA0010.jpeg

Last post

Gerard - I pulled the print for the 4th rear main last year so the museum digitized it and made it public.

By the way, all the digitized prints I can find on the Benson Ford website are cataloged in the members section of the EFR website - helpful resource.

Todd

7 Replies

347 Views

Last post by tumanj
Sat Jan 10, 2026 11:56 am

Search found 172 matches

Go to advanced search