MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 247 matches

Topics

Replies

Views

Last post

WTB, 26/27 Frame Only

Last post by henryford2 « Mon Jun 27, 2022 8:08 am
Posted in Classifieds - Parts

by henryford2 » Mon Jun 27, 2022 8:08 am » in Classifieds - Parts

Looking for a un-pitted or lightly pitted 26/27 frame only. No significant rips, tears, or tweaks within a 200 mile radius of greater Cleveland (44039). Thanks

0 Replies

1 Views

Last post by henryford2
Mon Jun 27, 2022 8:08 am
Skiddish Steering

Last post by George House « Mon Jun 27, 2022 7:51 am
Posted in General Discussion Forum (started 2019)
Replies: 16
by Professor Fate » Sun Jun 26, 2022 7:04 pm » in General Discussion Forum (started 2019)

First post

So here's today's adventure in model t land....
I'm trying to fix my front end. Car darts left or right on bumps. Can be scary....
----------------------------------------
Camber is at .313 in
(3.0 in is correct)

Gather is at .125 (3/16-1/4 in is correct) gather is only short by .06 in.

Camber is 2.7 inches short of 3.0 inch goal per Henry....

Last post

Whoa ! Didn’t y’all read the Prof said he has 3”+ play in his steering wheel ??..wrote it Sunday at 6:36 pm. That’s way too much. Initially he stated “car darts left and right on bumps”. Sun gears in the steering has caused that for me.

16 Replies

248 Views

Last post by George House
Mon Jun 27, 2022 7:51 am
Rough acceleration and coughing back through the carb

Last post by TXGOAT2 « Mon Jun 27, 2022 7:36 am
Posted in General Discussion Forum (started 2019)
Replies: 12
by Reno Speedster » Sun Jun 26, 2022 8:49 pm » in General Discussion Forum (started 2019)

First post

I have done some work on my 22 and have been driving it a bit. At first, it ran very smoothly but after driving it around for an hour the other day, it started to sputter and pop when I try to accelerate. It has a pretty smooth idle.

I have checked the electrical and it’s getting spark on all cylinders. Shorting each plug showed a noticeable...

Last post

** With the hood off, I can see some puffing back out through the carb when I am trying to start it. **
If it does this with the ignition OFF, you most likely have an intake valve problem.

12 Replies

181 Views

Last post by TXGOAT2
Mon Jun 27, 2022 7:36 am
Holley G vs NH

Last post by Alan Long « Mon Jun 27, 2022 6:47 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by Oldav8tor » Fri Jun 24, 2022 9:17 pm » in General Discussion Forum (started 2019)

First post

Today I picked up my engine after a transmission rebuild. As proof of life the rebuilder set it up on a Dyno and ran it for me, first with a Holley NH, then with my Holley G. I have a NH at home in a box that I've never gotten around to installing on the engine. Based upon the results, I think I will now :D
Carb_compare.jpg

Last post

After trying to get my 26 Roadster Pick up
to perform better and lively. The Z Head was an improvement, Truefire ignition did nothing however the NH straight thru out did the standard NH. I now go up my “test hill” in high gear and accelerating where as before I was in low.

Swapping the NH out for a Holley G probably would give better outcomes...

11 Replies

520 Views

Last post by Alan Long
Mon Jun 27, 2022 6:47 am
FS 26-27 Ford wire wheels and rear hubs

Last post by Humblej « Mon Jun 27, 2022 5:53 am
Posted in Classifieds - Parts
Replies: 3
by Humblej » Sat Jun 25, 2022 10:36 am » in Classifieds - Parts

First post

For sale 1926-27 Ford wire wheels. Nice condition. In paint, no rust, no repairs, solid, straight, and clean. $800 for set of four.

Rear Hubs for 26-27 wire wheels, good studs and threads, good drums, good keyway. $200 for the pair.

Pick up only. Located in northern Michigan
wirewheels.jpg

Last post

I have a buyer that wants them shipped but I am holding out for someone to pick them up in person. Anyone willing to drive to Charlevoix, Michigan can move to the front of the line.

3 Replies

331 Views

Last post by Humblej
Mon Jun 27, 2022 5:53 am
Passing of Patty Lang

Last post by D Stroud « Mon Jun 27, 2022 5:19 am
Posted in General Discussion Forum (started 2019)
Replies: 66
by Ashley » Mon May 09, 2022 3:46 pm » in General Discussion Forum (started 2019)

First post

I wanted to post the passing of Patty Lang. The other half of the founding of Lang's Old Car Parts. The business woman who was a power house behind our family business and at the heart of who Lang's Old Car Parts is. 40 years ago her and Don started this company and we want to thank everyone who has supported her and us and let us be part of their...

Last post

I've been away from the Forum for a while due to some life issues and just saw this. I'm so sorry to hear this. We lost our oldest daughter at age 36 to brain cancer five years ago, I know of no words that can ease the pain of losing a loved one. Dave

66 Replies

2285 Views

Last post by D Stroud
Mon Jun 27, 2022 5:19 am
Steering Shaft 1926

Last post by D Stroud « Mon Jun 27, 2022 4:00 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by Kennyg26 » Thu Jun 23, 2022 10:49 am » in General Discussion Forum (started 2019)

First post

Hello Group. Can someone please tell me if there is a difference between the steering shafts on a 1926/27 and previous years? I have a pre-1926 column assy. (round flange) and want to know if I purchase the correct version (square flange) and correct mounting bracket to frame, will the steering shaft work, or there a different one needed for the...

Last post

What Wayne said. That flat side makes spotting a 5to1 shaft very easy, even when covered in grease. ;) Dave

11 Replies

482 Views

Last post by D Stroud
Mon Jun 27, 2022 4:00 am
Oil Can holder accessory FOR SALE

Last post by Chris Haynes « Mon Jun 27, 2022 2:00 am
Posted in Classifieds - Parts
Replies: 3
by Dropacent » Tue Jun 21, 2022 1:03 pm » in Classifieds - Parts

First post

Fresh batch from the powder coat. What to do with that FoRd factory supplied oil can has always been a dilemma. Many styles of aftermarket holders have been supplied since back in the day. This is one of the best, IMHO. We’ve sold rusty originals on eBay for over $125 several times.
Made exactly in USA from an original pattern, and improved upon...

Last post

Can I get one that is bare metal?

3 Replies

377 Views

Last post by Chris Haynes
Mon Jun 27, 2022 2:00 am
Which is better plug

Last post by Craig Leach « Mon Jun 27, 2022 1:06 am
Posted in General Discussion Forum (started 2019)
Replies: 12
by Emeraude » Sun Jun 26, 2022 12:15 am » in General Discussion Forum (started 2019)

First post

I am going to buy a new set of plugs for my 21 that has a surging problem. I,m not sure if the plugs are the problem but where they look old and rusty I plan to replace. Lang’s champion 25 at$14.50 and motorcraft at $4.50
Should I go with champion and is it worth the extra money?

Last post

thumbnail.jpg plugs.jpg

12 Replies

458 Views

Last post by Craig Leach
Mon Jun 27, 2022 1:06 am
foot pedal on floor

Last post by Norman Kling « Mon Jun 27, 2022 12:56 am
Posted in General Discussion Forum (started 2019)
Replies: 3
by bnold5000 » Mon Jun 27, 2022 12:26 am » in General Discussion Forum (started 2019)

First post

There is a strange little foot pedal in the center of the floorboards just forward of the seat that is no longer hooked up to anything on my 1915 touring car. What was the purpose of the pedal?

Last post

Is there anything below the floorboard? Such as a switch or a lever? It could have been a starter switch if the car had a starter at sometime in the past. Or it could be a muffler cutout switch or a switch to an exhaust whistle. If you can show what is below the floorboard, it might be easier to figure out what it is for.
Norm

3 Replies

93 Views

Last post by Norman Kling
Mon Jun 27, 2022 12:56 am
Coast to Coast, Part 2 - the halfway point

Last post by BernhardBK « Mon Jun 27, 2022 12:23 am
Posted in General Discussion Forum (started 2019)
Replies: 48
by Rob » Tue Jun 21, 2022 3:33 pm » in General Discussion Forum (started 2019)

First post

Starting a new thread for the T travelers from Germany.

Below is a link to the first thread, From Coast to Coast.”

Below, west of Lincoln Nebraska on June 21, “the longest day.”
3953F6B7-E61C-49E8-8650-E99A7EB9EB5B.jpeg

Last post

Day 20, from Keystone, South Dakota to Lusk, Wyoming, 206 km, 129 miles.

Cold, cloudy, later sunny but still no 68 degrees.

Again grassland south of Custer, but different to that, what we saw before - slightly hilly, with trees. Later no trees any more, flatter grassland scenery.

The Ts drove very good, even the uphill passage of about 300...

48 Replies

2026 Views

Last post by BernhardBK
Mon Jun 27, 2022 12:23 am
What have you done with your model T in June?

Last post by Steve Jelf « Sun Jun 26, 2022 11:38 pm
Posted in General Discussion Forum (started 2019)
Replies: 79
by Duey_C » Wed Jun 01, 2022 3:31 am » in General Discussion Forum (started 2019)

First post

Too many irons in the fire right now.
I'm pressed to put in gas, charge the battery and make the '18 Runabout ready for a class reunion next door for rides. Again.
I fussed with him a few years ago and woke him up. Poor old bugger hasn't had body work/paint done since the 70's but he'll soldier on. An '18 with a '23 unit power-plant. Tin Cup,...

Last post

A minor little convenience:

IMG_0580 copy.JPG
I installed a King Oscar sardine can under the seat, beside the terminal board, to hold spare fuses. Terminal board in a 1915? Yep, for auxiliary tail/brake lights and turn signals.

79 Replies

4273 Views

Last post by Steve Jelf
Sun Jun 26, 2022 11:38 pm
WTB TT Radiator Shroud

Last post by Jeepbone1 « Sun Jun 26, 2022 10:37 pm
Posted in Classifieds - Parts
Replies: 1
by Jeepbone1 » Sat Jun 25, 2022 7:17 am » in Classifieds - Parts

First post

I need a nice radiator shroud for my 27 TT. All I have is the shorter T shrouds. Doesn’t need to be perfect. It’ll be painted to match the truck anyway. Call or text anytime at 540-7six1-two303 or email at bkirtner(at)gmail(dot)com. I can send PayPal, check or postal moneyorder. Thanks

Brad

Last post

To the top please.

Brad

1 Replies

92 Views

Last post by Jeepbone1
Sun Jun 26, 2022 10:37 pm
Cross Member

Last post by Model T Matt « Sun Jun 26, 2022 10:13 pm
Posted in Classifieds - Parts
Replies: 1
by Model T Matt » Sun Jun 26, 2022 10:35 am » in Classifieds - Parts

First post

Nice front cross member asking $40.00 shipped call Matt 503-824-2681

Last post

Sold Thanks Ed

1 Replies

162 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:13 pm
Front Hub

Last post by Model T Matt « Sun Jun 26, 2022 10:11 pm
Posted in Classifieds - Parts
Replies: 2
by Model T Matt » Sun Jun 26, 2022 10:54 am » in Classifieds - Parts

First post

Nice front Hub $30.00 shipped to your door call Matt 503-824-2681

Last post

Sold to Mike thanks

2 Replies

195 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:11 pm
Running Board Brackets

Last post by Model T Matt « Sun Jun 26, 2022 10:11 pm
Posted in Classifieds - Parts
Replies: 2
by Model T Matt » Sun Jun 26, 2022 10:26 am » in Classifieds - Parts

First post

Nice set of Cast Brackets asking $50.00 shipped to your door call Matt 503-824-2681

Last post

held for Bill

2 Replies

147 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:11 pm
New headgaskets

Last post by TXGOAT2 « Sun Jun 26, 2022 9:54 pm
Posted in General Discussion Forum (started 2019)
Replies: 42
by Norman Kling » Sun Jun 19, 2022 7:25 pm » in General Discussion Forum (started 2019)

First post

Does anyone know whether new headgaskets are available now?
Norm

Last post

That looks like damage to me. As for the tight clearance at the edge of the bores or valves, those area could be relieved as needed with a dremel tool or with hand tools.

42 Replies

2431 Views

Last post by TXGOAT2
Sun Jun 26, 2022 9:54 pm
Any one seen this?

Last post by Craig Leach « Sun Jun 26, 2022 9:25 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Dan Hatch » Sun Jun 26, 2022 2:59 pm » in General Discussion Forum (started 2019)

First post

Found a pair of these in some stuff I have had for years. Anyone know the story on them? Yes, I know they are rear end thrust bearings, but who made them? Fit a T rear end. Not sure about thickness yet. Thanks Dan
1968564C-DAE8-468B-9DF7-91C013007B75.jpeg
78B179BF-DB70-4D46-BCDD-66753F3E8972.jpeg
7F0F8942-9AFA-4537-AEE8-40C2DA837A61.jpeg

Last post

Dan,
Very neat after market part the fact that so many people thought they had a better idea than Henry did is why we can walk into a auto parts store and buy parts for our modern cars & trucks at a price we can almost afford ( no pun intended )
Craig.

6 Replies

329 Views

Last post by Craig Leach
Sun Jun 26, 2022 9:25 pm
1927 Tourer Top Irons

Last post by clemine « Sun Jun 26, 2022 9:16 pm
Posted in Classifieds - Parts
Replies: 9
by clemine » Sun Jan 09, 2022 1:29 am » in Classifieds - Parts

First post

Just wanting to know if anyone makes reproduction top irons for my Tourer?
Mine are rusted out on the curves and the main tapered bow is broken.
If they are not available, any tips on repairs?

Regards Clem
Tumby Bay
South Australia

Last post

Thanks for that Allan. I looked for a local supplier for the double height sticks but ended up getting them from the UK. Just needed 2 at this stage for the back straps as well as the top.
I'll check out Dalys for future requirements. I'm not up to side curtains yet, but if it continues this cold I soon will be.
Regards Clem

9 Replies

683 Views

Last post by clemine
Sun Jun 26, 2022 9:16 pm
Bye-bye flywheel

Last post by Oldav8tor « Sun Jun 26, 2022 9:07 pm
Posted in General Discussion Forum (started 2019)
Replies: 16
by Oldav8tor » Fri Jun 24, 2022 8:41 pm » in General Discussion Forum (started 2019)

First post

When a engine rebuilder starts a conversation saying I've never seen one this bad you know it isn't going to be good news. My '17 touring has 5400+ mostly trouble-free miles on it since August of 2019. The engine is strong and the transmission worked smoothly and ran quietly. Reverse was never as smooth as low but it did what I needed it to do....

Last post

Thanks to all of you who have shared your experiences and observations. I finally found time to drag the damaged triple gears out of the box and look them over more closely. It is obvious that the bushings locked upon the pins. It appears that the gears were spinning on the bushings (and eventually spinning at least two of the pins). I have to...

16 Replies

857 Views

Last post by Oldav8tor
Sun Jun 26, 2022 9:07 pm
Lower Firewall '26-"27

Last post by Professor Fate « Sun Jun 26, 2022 8:39 pm
Posted in General Discussion Forum (started 2019)
Replies: 25
by Professor Fate » Fri Jun 24, 2022 11:55 pm » in General Discussion Forum (started 2019)

First post

Anyone have the pattern/drawings for a lower firewall for a '26-'27?
I'd like to deflect some of that summer heat.

Last post

Thanks all! Changes to be made this week.

25 Replies

504 Views

Last post by Professor Fate
Sun Jun 26, 2022 8:39 pm
1915 Aluminium Hood New

Last post by 25tfire « Sun Jun 26, 2022 8:06 pm
Posted in Classifieds - Parts

by 25tfire » Sun Jun 26, 2022 8:06 pm » in Classifieds - Parts

New 1915 Hood with leather rub strips and rods. $400 plus shipping.
Contact Jim 970-373-8864 NO Scammers please.

0 Replies

82 Views

Last post by 25tfire
Sun Jun 26, 2022 8:06 pm
Sometimes the news surprises. Even in 1905

Last post by TXGOAT2 « Sun Jun 26, 2022 7:33 pm
Posted in General Discussion Forum (started 2019)
Replies: 10
by Rob » Sat Jun 25, 2022 8:42 pm » in General Discussion Forum (started 2019)

First post

I was looking for a few early Ford ads and articles in Newspapers.com, and came across this. A Ford Model A, with options, for sale in Detroit, January 15, 1905:

28C8A011-29E7-4EF2-91C4-92767FA4D929.jpeg

The owner offers to take a trial spin (who would have thought going for a spin was already part of the automobile lexicon?). Additionally,...

Last post

The early Franklins had a unique look from the front, and I'd guess they sounded like nothing else, too.

10 Replies

490 Views

Last post by TXGOAT2
Sun Jun 26, 2022 7:33 pm
FS 1912? -1913 Stewart Model C Speedometer

Last post by Larry « Sun Jun 26, 2022 6:12 pm
Posted in Classifieds - Parts

by Larry » Sun Jun 26, 2022 6:12 pm » in Classifieds - Parts

For Sale: Original 1912?-1913 Stewart speedometer model C
Nice case, bezel & face. Turns but tight. May need cleaned or gone through. $125 + Shipping.

0 Replies

131 Views

Last post by Larry
Sun Jun 26, 2022 6:12 pm
A view of yesterday

Last post by Wayne Sheldon « Sun Jun 26, 2022 5:32 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by Dollisdad » Sun Jun 26, 2022 10:34 am » in General Discussion Forum (started 2019)

First post

06B05AD1-88D4-4574-93CB-A49C67299C0B.jpeg 968106A5-7817-4333-9E37-0D425B903ED2.jpeg 3580CA90-B50B-4D90-B1FA-9475759613A2.jpeg 29611F2C-D09C-402F-824B-454E44A0B288.jpeg

Last post

Picture 5's clothing styles suggest that the model T is likely fifteen to twenty years old. It may well have been taken during WW2. A lot of young men coming of age during the war, unable to get anything newer, got and used model Ts as their first car. Automatically allowed gas rationing, there was an advantage to having a license and a car for...

12 Replies

423 Views

Last post by Wayne Sheldon
Sun Jun 26, 2022 5:32 pm
What is this dash cluster from?

Last post by VWFOOL Oregon Coast « Sun Jun 26, 2022 5:15 pm
Posted in OT - Off topic
Replies: 2
by VWFOOL Oregon Coast » Thu Jun 16, 2022 10:24 pm » in OT - Off topic

First post

I know a lot of you guys know all kinds of Old car stuff. This came with one of my model Ts years ago. I have no idea what it goes to. Any help is appreciated

Last post

Awesome. Thank you for the help

2 Replies

293 Views

Last post by VWFOOL Oregon Coast
Sun Jun 26, 2022 5:15 pm
Confirmation of TT Engine Casting Date

Last post by Steve Jelf « Sun Jun 26, 2022 4:50 pm
Posted in General Discussion Forum (started 2019)
Replies: 14
by George House » Fri Jun 24, 2022 4:35 pm » in General Discussion Forum (started 2019)

First post

I just almost finished restoring my 3rd TT. I bought the chassis on a Bill of Sale and am now preparing to get a Title. The engine serial number is 10,955,119 and the old MTFCA encyclopedia states its a December 1924 engine from Highland Park. I understand that makes it a 1925 model. It has the ‘New and Improved’ engine/tranny style so I’m...

Last post

...didn't they have the new next year's cars listed as of October 1st ???
Most years, no. The new Model T went on sale in October 1908 as a 1909 model, but in most years the new model year coincided with the fiscal year that began August 1. Bruce put all this in his encyclopedia.

14 Replies

373 Views

Last post by Steve Jelf
Sun Jun 26, 2022 4:50 pm
27 Coupe door glass install

Last post by Billdizer,Spencer In « Sun Jun 26, 2022 4:46 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by JoeG48 » Mon Jun 20, 2022 1:58 pm » in General Discussion Forum (started 2019)

First post

I am installing door window glass in my 27 Coupe. I can't seem to attach the bottom metal channel to the glass (on the door glass ) with out it falling off after moving the window up and down a couple times. --- does anyone now a way to attach the metal channel, and stop this from happening ... I have tried the window setting tape, it is not a...

Last post

I buy 3M urethane windshield sealer at the local Napa for about $20.00 for a caulking tube size. It will glue the window in forever! Bad part is that the tube is hard to re seal so you need to use as much as you can all the same time. This is the heavy black goo that modern windshields are installed with, very strong. I used some last week to glue...

6 Replies

232 Views

Last post by Billdizer,Spencer In
Sun Jun 26, 2022 4:46 pm
For Sale - 1912 Holley H1 #4550 Carburetor

Last post by TWrenn « Sun Jun 26, 2022 4:32 pm
Posted in Classifieds - Parts
Replies: 2
by John Haynes » Sun Jun 19, 2022 4:19 pm » in Classifieds - Parts

First post

For Sale is a 1912 Holley H1 # 4550. This has the correct elbow fitting and has little wear on the Choke and throttle, the spring still works on the choke. Will need to be rebuilt. I believe this was the last of the series of three #4550's used in 1912. Asking $295.00 plus Shipping. Please email for more photos or if you have questions.

Last post

Lucky to have the elbow! So many are missing it and almost impossible to find. This is a good buy.

2 Replies

307 Views

Last post by TWrenn
Sun Jun 26, 2022 4:32 pm
Headlight wiring

Last post by DanTreace « Sun Jun 26, 2022 4:32 pm
Posted in General Discussion Forum (started 2019)
Replies: 2
by JoeG48 » Sun Jun 26, 2022 12:36 pm » in General Discussion Forum (started 2019)

First post

Where does the headlight wire from the back of the headlight bucket enter the car on a 1926-27 Model T since there is no hole in the hood shelf for this year?

Thanks Joe

Last post

As Jeff wrote:

head lamp wire.jpg

2 Replies

104 Views

Last post by DanTreace
Sun Jun 26, 2022 4:32 pm
Spotlight mirror F/S

Last post by Layden Butler « Sun Jun 26, 2022 3:28 pm
Posted in Classifieds - Parts
Replies: 1
by Layden Butler » Tue Jun 21, 2022 2:11 pm » in Classifieds - Parts

First post

Clamp on combination spotlight and rearview mirror, original 1920s as found, $95, domestic shipping $20.

Last post

$75 plus the ride.

1 Replies

196 Views

Last post by Layden Butler
Sun Jun 26, 2022 3:28 pm
FS 1926-27 “Stop” Tail Light

Last post by Larry « Sun Jun 26, 2022 1:48 pm
Posted in Classifieds - Parts
Replies: 2
by Larry » Sat Jun 25, 2022 8:39 am » in Classifieds - Parts

First post

1926-27 Stop taillight with mounting bracket and switch. Very nice condition. $250 +shipping.

D7DAE2B8-50B8-4894-B5CF-DEE656287D77.png

Last post

Sold.
Thank You!

2 Replies

342 Views

Last post by Larry
Sun Jun 26, 2022 1:48 pm
Have you ever seen this, we have not

Last post by shadetree « Sun Jun 26, 2022 12:30 pm
Posted in General Discussion Forum (started 2019)
Replies: 3
by FATMAN » Sun Jun 26, 2022 10:10 am » in General Discussion Forum (started 2019)

First post

Bill Devine and his wife were here yesterday looking around and he spotted these
door check straps with Firestone Logo, how cool is that, has anyone ever seen or known these were made? Bob

Last post

Yes. Firestone. Used on some of the Model A body styles, in various lengths. 8 11/16 long would be 28-29 coupe and tudor models. Most were chocolate brown, but some may have been black. How are they for flexibility after so many years? I know Model A restorers that may be interested if for sale.
.

3 Replies

370 Views

Last post by shadetree
Sun Jun 26, 2022 12:30 pm
Today's Social Distancing Video

Last post by Scott C. « Sun Jun 26, 2022 12:21 pm
Posted in General Discussion Forum (started 2019)
Replies: 383
by Scott C. » Wed Apr 01, 2020 10:22 pm » in General Discussion Forum (started 2019)
1

2

3

4
First post

Here is my idea of social distancing .

Last post

How about an intermission? Yesterday, they held the annual Freedom Festival here in town. At the end they put on about a 20 minute long fireworks show. I watched it from my back yard and filmed part of it with my Iphone.
Enjoy the show!
383 Replies

76900 Views

Last post by Scott C.
Sun Jun 26, 2022 12:21 pm
dash panel and steering column mounting bracket

Last post by Melba Nolan « Sun Jun 26, 2022 12:20 pm
Posted in Classifieds - Parts
Replies: 4
by Melba Nolan » Sat Jun 04, 2022 10:56 pm » in Classifieds - Parts

First post

For Sale is a very good dash panel with the bracket for the steering column. both pieces are there $75.00 plus postage. [/image
Pictures won't load, but can send email fits 23/25

Last post

move to top

4 Replies

464 Views

Last post by Melba Nolan
Sun Jun 26, 2022 12:20 pm
Magneto Recharger

Last post by Melba Nolan « Sun Jun 26, 2022 12:19 pm
Posted in Classifieds - Parts

by Melba Nolan » Sun Jun 26, 2022 12:19 pm » in Classifieds - Parts

For Sale: A Mag Charger for Ford and Fordson Model 23 made by Colpin Los Angeles Ca. $250 plus shipping

0 Replies

194 Views

Last post by Melba Nolan
Sun Jun 26, 2022 12:19 pm
FS. Rebuilt Open Valve Style T Engine

Last post by aajf « Sun Jun 26, 2022 12:18 pm
Posted in Classifieds - Parts
Replies: 15
by aajf » Fri Mar 04, 2022 11:32 pm » in Classifieds - Parts

First post

Hello All,

Well it's time to sell the Open Valve Style T engine. I am not a knowledgeable person in regards to Model T engines. Thanks to some MTFCA members for their help towards identifying the engine.
When i acquired the engine i was told the following:

Model T hot redder Ron Kippling owned it. Yes, its a later block made to look old. This...

Last post

Sold. Thanks MTFCA!!!!

15 Replies

3720 Views

Last post by aajf
Sun Jun 26, 2022 12:18 pm
Oil Plug Thread Size

Last post by MWalker « Sun Jun 26, 2022 11:05 am
Posted in General Discussion Forum (started 2019)
Replies: 2
by MWalker » Sat Jun 25, 2022 3:34 pm » in General Discussion Forum (started 2019)

First post

Who knows the thread size and thread count per inch for the oil drain plug in the crankcase and rear end? I need to buy a tap to chase the threads in a crankcase and am having trouble measuring the threads. Thanks.

Last post

Thank you.

2 Replies

199 Views

Last post by MWalker
Sun Jun 26, 2022 11:05 am
Intake-exhaust clamps

Last post by Model T Matt « Sun Jun 26, 2022 10:58 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:58 am » in Classifieds - Parts

Set of early and late Clamps $20.00 shipped to your door call Matt 503-824-2681

0 Replies

107 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:58 am
Emergency Ears

Last post by Model T Matt « Sun Jun 26, 2022 10:52 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:52 am » in Classifieds - Parts

For sale Three Apco Emergency Motor Mount Ears asking $30.00 shipped to your door call Matt 503-824-2681

0 Replies

114 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:52 am
26/27 brake drum

Last post by Model T Matt « Sun Jun 26, 2022 10:49 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:49 am » in Classifieds - Parts

For sale rear brake drum $25.00 shipped to your door call Matt 503-824-2681

0 Replies

84 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:49 am
Assortment of Hood Shelfs

Last post by Model T Matt « Sun Jun 26, 2022 10:39 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:39 am » in Classifieds - Parts

A Bunch of Hood Shelfs all need a little twisting get all for $45.00 shipped to your door call Matt 503-824-2681

0 Replies

82 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:39 am
Battery Holder

Last post by Model T Matt « Sun Jun 26, 2022 10:31 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:31 am » in Classifieds - Parts

For Sale Battery Holder asking $60.00 includes shipping call Matt 503-824-2681

0 Replies

95 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:31 am
26/27 Quadrant

Last post by Model T Matt « Sun Jun 26, 2022 10:28 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:28 am » in Classifieds - Parts

E Brake Quadrant for a 26/27 asking $15.00 shipped to your door call Matt 503-824-2681

0 Replies

61 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:28 am
Bill's Auto Works

Last post by Rustytinman « Sun Jun 26, 2022 10:26 am
Posted in General Discussion Forum (started 2019)
Replies: 8
by Pat Branigan Wisc » Sun May 29, 2022 7:56 pm » in General Discussion Forum (started 2019)

First post

Just a shout out to Bill for being so dependable and on time and courteous when he picked up a 1905 H Maxwell that I sold. The buyer arranged the shipping and I couldn't of been more happy with his service after meeting Bill. Thank you and safe travels!

Last post

I have great respect Bill and while interacting with some of his customers they all let me know what a great transporter he is that he always follows through when he commits to his customers .As one he calls on to help with his transports when he gets over book .I too hope that I have earned their respect and I thank Bill for sharing his expertise...

8 Replies

1086 Views

Last post by Rustytinman
Sun Jun 26, 2022 10:26 am
Top Saddles and Arms

Last post by Model T Matt « Sun Jun 26, 2022 10:23 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:23 am » in Classifieds - Parts

For Sale a set of Arms and Saddles $40.00 shipped to your door call Matt 503-824-2681

0 Replies

67 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:23 am
26-27 front fender brackets

Last post by Model T Matt « Sun Jun 26, 2022 10:21 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:21 am » in Classifieds - Parts

A pair of 26-27 fender brackets $40.00 shipped to your door call Matt 503-824-2681

0 Replies

48 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:21 am
4 Dip Cover

Last post by Model T Matt « Sun Jun 26, 2022 10:18 am
Posted in Classifieds - Parts

by Model T Matt » Sun Jun 26, 2022 10:18 am » in Classifieds - Parts

Cover for a 4 dip oil pan asking $35.00 shipped to your door call Matt 503-824-2681

0 Replies

60 Views

Last post by Model T Matt
Sun Jun 26, 2022 10:18 am
NATIONWIDE SINGLE CAR TRANSPORT, OPEN OR ENCLOSED

Last post by Rustytinman « Sun Jun 26, 2022 10:15 am
Posted in Services
Replies: 105
by Bills Auto Works » Sun Jan 20, 2019 11:32 am » in Services
1

2
First post

Hello Everyone,

I am starting my 36th year of business in 2019 & have well OVER 3.5 million accident free transport miles . This equates to more than 2500 vehicles transported. Please see this link for hundreds of all positive references posted by the ACTUAL Hamb members who have used my service in the past. I do NOT post my own feedback & I do...

Last post

I have great respect for Bill he always follows through with his commitments to his customers as one he calls on when he is overbooked I have had the pleasure of meeting many of his customers and they have nothing but great praise for Bill. I hope that I too have established the same respect from my customers as i have done my best to follow Bills...
105 Replies

28743 Views

Last post by Rustytinman
Sun Jun 26, 2022 10:15 am
Brass Top Model T Coil

Last post by bnold5000 « Sun Jun 26, 2022 9:59 am
Posted in General Discussion Forum (started 2019)
Replies: 8
by bnold5000 » Sat Jun 25, 2022 12:32 pm » in General Discussion Forum (started 2019)

First post

Hello Everyone,
I am in the process of restoring my 1915 Model T Ford Touring car to original condition. It is my understanding that the correct ignition coils for this car are “brass top coils.”
Is this correct? And if so, does this mean that the metal plate on the top of the coil is made of brass? And if so, is that brass plate painted black or...

Last post

really great info.!
Thanks for sharing!

8 Replies

415 Views

Last post by bnold5000
Sun Jun 26, 2022 9:59 am
Holley vaporizer fs

Last post by CTLeonard « Sun Jun 26, 2022 9:35 am
Posted in Classifieds - Parts
Replies: 4
by CTLeonard » Thu Jul 29, 2021 1:41 pm » in Classifieds - Parts

First post

I have a complete Holley vaporizer. Threads are good; and a straight edge runs true on exhaust ports. Of course it will have to be gone thru with new gaskets. 125.00 plus shipping IMG_20210729_123521736.jpg IMG_20210729_121553619.jpg IMG_20210729_121604902.jpg IMG_20210729_122256574.jpg IMG_20210729_122403530_HDR.jpg

Last post

It's still available

4 Replies

781 Views

Last post by CTLeonard
Sun Jun 26, 2022 9:35 am
Any Lakewood Colorado T Member?

Last post by mtntee20 « Sun Jun 26, 2022 9:22 am
Posted in General Discussion Forum (started 2019)
Replies: 1
by SurfCityGene » Sun Jun 26, 2022 2:45 am » in General Discussion Forum (started 2019)

First post

Looking for a Model T member in or near Lakewood, Colorado. Please contact me by message or email gcarrother@aol.com
Thanks

Last post

Gene,

I sent an email concerning your request.

Terry & Sharon Miller

1 Replies

95 Views

Last post by mtntee20
Sun Jun 26, 2022 9:22 am
FS 1916 Engine

Last post by Humblej « Sun Jun 26, 2022 8:52 am
Posted in Classifieds - Parts

by Humblej » Sun Jun 26, 2022 8:52 am » in Classifieds - Parts

Complete 1916 engine. Looks good, no cracks, no damage. Aluminum hogshead, smooth pedals, block has 1916 casting date, S/N 1081588. 3 dip narrow nose pan with good mounting ears, no cracks, no repairs. I have not looked inside but you can open it up and inspect prior to buying. Local pick up only, I will not ship. Located in northern Michigan....

0 Replies

161 Views

Last post by Humblej
Sun Jun 26, 2022 8:52 am
WTB - kingpin reamer

Last post by Humblej « Sun Jun 26, 2022 8:18 am
Posted in Classifieds - Parts
Replies: 1
by blauvelt » Sat Jun 25, 2022 6:17 pm » in Classifieds - Parts

First post

Looking for a king pin bushing reamer for a model T.

Thanks!

Last post

Email sent

reamer1.jpg

1 Replies

161 Views

Last post by Humblej
Sun Jun 26, 2022 8:18 am
Wonderful Wisconsin Tour

Last post by tvw « Sun Jun 26, 2022 8:08 am
Posted in General Discussion Forum (started 2019)
Replies: 27
by rodelljunior » Fri Mar 11, 2022 8:18 pm » in General Discussion Forum (started 2019)

First post

The Dairyland Tin Lizzies are excited to be hosting the Model T Ford Club of America national Wonderful Wisconsin Tour June 19-24, 2022.

Tour chairman Keith Gumbinger asked me to share some background information related to the tour, which I began to post on our Dairyland Tin Lizzies facebook page. I am sharing this information to give those...

Last post

I was able to meet up with this crowd on Tuesday as everyone was coming in from the day's run, I was impressed that folks had a smile on their faces after a day of HOT sunshine and still had kind words and time to talk to someone wandering the parking lot oogling at their cars. Seeing your rigs running and driving around inspired me to get mine...

27 Replies

2984 Views

Last post by tvw
Sun Jun 26, 2022 8:08 am
FJ - Some Humor To Brighten Your Day

Last post by perry kete « Sun Jun 26, 2022 6:55 am
Posted in OT - Off topic
Replies: 1421
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

11

12

13

14

15
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

AAYQXX9.jpg
1421 Replies

272183 Views

Last post by perry kete
Sun Jun 26, 2022 6:55 am
Advice Please on flexi universal joint disc

Last post by Rata Road « Sun Jun 26, 2022 2:00 am
Posted in OT - Off topic
Replies: 30
by Rata Road » Fri May 20, 2022 4:44 pm » in OT - Off topic

First post

I have recently bought a 1930 Triumph Super 7 car that has been off the road for 22 years. I now have it driving but I have a vibration.
I think its the drive shaft (check the video link) so that's away being checked, straightened and balanced etc.
The car has a drive tube from the diff halfway up the car and then a solid drive shaft about half a...

Last post

Update - The oil soaked flexi mounts came up subtle and were 90% better and would be good enough a fix in some situations but I had a driveshaft made. I have also tracked down the original maker of the flexi joints and some of you were correct they were just home made from old conveyor belt material. I suspect they aren't exactly symmetrical.
Here...

30 Replies

853 Views

Last post by Rata Road
Sun Jun 26, 2022 2:00 am
Wanted to buy radius rod ball socket for 4 dip pan

Last post by Mark Gregush « Sun Jun 26, 2022 1:57 am
Posted in Classifieds - Parts
Replies: 9
by Mark Gregush » Thu Jun 16, 2022 3:20 pm » in Classifieds - Parts

First post

Ok so I am going to try and straighten my 4 dip pan where the ball socket mounts. The one that is now mounted is just too bent up to mess with, along with the socket being too worn. At some time the car was hit or damaged, pushing/bending it out of shape.

I am in need of a GOOD socket, preferably not too worn in the ball socket. I need one that...

Last post

Bob, I will check which one I will need. Ran out and looked, approx 1 -5/8 X 3-5/8 hole spacing is the one I would need. Didn't know there was a difference. The pan was on a 1925, but who know if it was original. If check is ok, send me a pm with total and address. Thank very much.
Mark
PS sorry was later in the day when I saw this. Been outside,...

9 Replies

368 Views

Last post by Mark Gregush
Sun Jun 26, 2022 1:57 am
FS Fireston S-120-CF : Champion C4 : C-16C boxes

Last post by TRDxB2 « Sun Jun 26, 2022 12:47 am
Posted in Classifieds - Parts

by TRDxB2 » Sun Jun 26, 2022 12:47 am » in Classifieds - Parts

PayPal to friend & Family preferred to my email address - plus shipping
Four Firestone S-120-CF spark plugs appear to be NOS. Three of the four boxes are in very good condition and have instructions. The forth end flaps or missing, $60
IMG_3533.JPG
IMG_3563.JPG
--
--
Four Champion C 4 spark plugs look to be unused. Three of the four are the...

0 Replies

128 Views

Last post by TRDxB2
Sun Jun 26, 2022 12:47 am
gas tank, brass headlight rims

Last post by Melba Nolan « Sun Jun 26, 2022 12:22 am
Posted in Classifieds - Parts

by Melba Nolan » Sun Jun 26, 2022 12:22 am » in Classifieds - Parts

For sale: Coupe or sedan gas tank $350 16/25
Round gas tank with end outlet brackets and gas cap and $450 11/12
Round gas tank has end outlet 11/12 $400
A pair of Brass headlight rims that appear to not have been used $100
One OLE SOL Brass bucket made by Hawthorne in good condition. A few small dingies in one area $150
One Brass bonnet made by...

0 Replies

173 Views

Last post by Melba Nolan
Sun Jun 26, 2022 12:22 am
E timer

Last post by speedytinc « Sat Jun 25, 2022 11:58 pm
Posted in General Discussion Forum (started 2019)
Replies: 6
by Don ellis » Sat Jun 25, 2022 2:34 pm » in General Discussion Forum (started 2019)

First post

Hey Mike, can I run a E timer with a 20 volt drill battery?

Last post

I was thinking of convenience, I always have charged dewalt batteries around. If it was safe to use I could just throw one in the car for a spare.

A local t guy used to run a 13 roadster on a makita 9.6v battery on 1 tour he made it 1/2 way, maybe 80 miles, but didnt bring a second to make it home. Thats a normal timer T.

6 Replies

368 Views

Last post by speedytinc
Sat Jun 25, 2022 11:58 pm
FOUND - Steel Rear Driver's Door Pillar 1923/25 Touring

Last post by rehoag « Sat Jun 25, 2022 11:29 pm
Posted in Classifieds - Parts
Replies: 2
by rehoag » Fri Jun 24, 2022 8:06 pm » in Classifieds - Parts

First post

Looking for a steel, driver's side rear door pillar that the door hinge mounts on. 1923-1925 Touring.

Thanks!

Last post

Thank-you, that is very helpful!

2 Replies

106 Views

Last post by rehoag
Sat Jun 25, 2022 11:29 pm
WTB - A cam converted to a T block

Last post by frontyboy « Sat Jun 25, 2022 11:08 pm
Posted in Classifieds - Parts
Replies: 5
by blauvelt » Fri Jun 17, 2022 11:00 pm » in Classifieds - Parts

First post

Maybe one on the shelf? Or could build one? Please let me know. Thanks!

Last post

I have a 4 cylinder chevrolet cam turned down to a t block. It has a lift of approx .270. It fits into a t block and all lobes line up. $75.00 plus freight.

brasscarguy@comcast.net

5 Replies

551 Views

Last post by frontyboy
Sat Jun 25, 2022 11:08 pm
Adding an external trunk to a Touring

Last post by jiminbartow « Sat Jun 25, 2022 11:01 pm
Posted in General Discussion Forum (started 2019)
Replies: 9
by Acpracing » Wed Jun 22, 2022 7:33 pm » in General Discussion Forum (started 2019)

First post

I've searched the best I could, but couldn't find anything.

I'd like to add an external trunk - wicker/fabric/leather to my 1919 Touring. I'm sure I've seen some with them with a mounting bracket to the frame. Does anyone have photos of this? Any idea what I start looking for in terms of bracketry or even trunks? I see some suited to As but...

Last post

Here is a photo for a 1916 touring. Jim Patrick

C4DB43DA-3A22-49CB-AE48-08B522EF466C.

9 Replies

486 Views

Last post by jiminbartow
Sat Jun 25, 2022 11:01 pm
For Sale: Lucas King of the Road Accessory Brass Trumpet Horn

Last post by GGZ « Sat Jun 25, 2022 10:31 pm
Posted in Classifieds - Parts
Replies: 9
by GGZ » Fri Feb 18, 2022 8:35 pm » in Classifieds - Parts

First post

Price reduced to 125.00 postpaid within the USA.

Here is a Lucas King of the Road Accessory Trumpet Horn from the early 1900s. It is all brass and measures about 16 in overall length with a 3 diameter bell. It retains all of its original paint, the mounting bracket, the reed and reed holder, original front screen, Lucas emblem, etc. It appears...

Last post

Still for sale......

9 Replies

1437 Views

Last post by GGZ
Sat Jun 25, 2022 10:31 pm
1921 Speedster

Last post by Speedster21 « Sat Jun 25, 2022 9:40 pm
Posted in Classifieds - Vehicles
Replies: 4
by Speedster21 » Tue Jun 07, 2022 1:19 pm » in Classifieds - Vehicles

First post

1921 Model T Speedster $8,500
New Spokes and hub nuts, wheels rebuilt by Stutzman's
New Goodyear tires and tubes
New battery
Original 6 volt system with electric start
Starts on battery runs on magneto

Last post

Car has been sold. Thank you

4 Replies

1438 Views

Last post by Speedster21
Sat Jun 25, 2022 9:40 pm
model T keys For Sale

Last post by Reno Speedster « Sat Jun 25, 2022 9:39 pm
Posted in Classifieds - Parts
Replies: 22
by fordrelic » Sun Feb 20, 2022 6:06 pm » in Classifieds - Parts

First post

Several original model T keys For Sale. I have most numbers . $10 each plus shipping.

Last post

Do you have a 59?

22 Replies

2884 Views

Last post by Reno Speedster
Sat Jun 25, 2022 9:39 pm
When you insist on buying the lowest cost part...

Last post by Dropacent « Sat Jun 25, 2022 9:24 pm
Posted in OT - Off topic
Replies: 6
by Scott_Conger » Tue Jun 21, 2022 11:13 pm » in OT - Off topic

First post

this is how it's made
would you want your child working here?

Last post

Perry Keet, unless your local shop has 10 employees, they probably will never see osha ( until the first amputation ) There is a copper kettle company hereabouts ( I don’t want to put a bullseye on them) that is actually medieval. First time I’ve ever seen large copper knife switches turning on belt driven machinery. Scariest place I’ve even been...

6 Replies

337 Views

Last post by Dropacent
Sat Jun 25, 2022 9:24 pm
FOR SALE - S&M NUMBER 80 ENCLOSED CAR SPOT LIGHT IN EXCELLENT CONDITION

Last post by Jay In Northern Ca. « Sat Jun 25, 2022 8:52 pm
Posted in Classifieds - Parts

by Jay In Northern Ca. » Sat Jun 25, 2022 8:52 pm » in Classifieds - Parts

This is a well preserved original period spotlight for your enclosed car. The reflector is in excellent condition. Asking $120 plus postage.
S&M Closed Car SpotLight 2.jpg S&M Closed Car SpotLight 3.jpg S&M Closed Car SpotLight 4.jpg S&M Closed Car SpotLight 5.jpg
Please use this email address below and NOT the personal messaging...

0 Replies

117 Views

Last post by Jay In Northern Ca.
Sat Jun 25, 2022 8:52 pm
Gastank cap thread size - Please help

Last post by Allan « Sat Jun 25, 2022 8:48 pm
Posted in General Discussion Forum (started 2019)
Replies: 3
by rainer » Sat Jun 25, 2022 11:20 am » in General Discussion Forum (started 2019)

First post

Hello.

I am working on an emergency gas-tank cap. In case that I am low on gas I want to use an air-pump to pressurize the tank a little bit.

Of course, I don't want to modify the original brass cap, and even a used one is too expensive because of shipping cost, so I got the idea to 3D print one, including the thread, in Nylon, with a little...

Last post

The petrol tank cap is a fairly standard size and thread. A Fordson tractor cap fits, either the radiator cap or the fuel tank cap. A more ready source is the bung in a 200 litre fuel/chemical drum. Nowadays these are usually diecast, so any fitting to the bung would need to be bolt-in rather than welded/soldered.

Allan from down under.

3 Replies

271 Views

Last post by Allan
Sat Jun 25, 2022 8:48 pm
FS 1926 Roadster Pickup.

Last post by BobP « Sat Jun 25, 2022 8:32 pm
Posted in Classifieds - Vehicles
Replies: 2
by BobP » Sat Jun 25, 2022 8:30 pm » in Classifieds - Vehicles

First post

For sale 1926 Roadster pickup. Runs, drives, has new battery, rebuilt carb. good tires and wheels, good solid body and box. It has the correct windshield, needs glass. $6,900 OBO. NO TEXTING. five07 458 677eight.

Last post

more pics .....

2 Replies

247 Views

Last post by BobP
Sat Jun 25, 2022 8:32 pm
WTB - MAGNETO POST

Last post by RajoRacer « Sat Jun 25, 2022 8:24 pm
Posted in Classifieds - Parts
Replies: 10
by Duckwing » Wed Jun 15, 2022 4:26 pm » in Classifieds - Parts

First post

I need a good used original magneto post for my 26 T with outside oil line. Thanks.

Last post

The oil is splash-forced into the open contact bottom.

10 Replies

392 Views

Last post by RajoRacer
Sat Jun 25, 2022 8:24 pm
SPOKEN FOR - UNUSUAL BRASS TIRE HAND PUMP

Last post by Jay In Northern Ca. « Sat Jun 25, 2022 4:50 pm
Posted in Classifieds - Parts

by Jay In Northern Ca. » Sat Jun 25, 2022 4:50 pm » in Classifieds - Parts

Here's an interesting tire pump. The outside of the body pulls up and down and the inside stays put to the foot holds when pumping. Made by the HOLSTEIN MFG CO., RICHLAND PA. It's in excellent shape and will need a new leather pump washer to work along with a hose kit. Asking $75 plus postage.
h1.jpg h2.jpg h3.jpg h4.jpg

Please use this email...

0 Replies

194 Views

Last post by Jay In Northern Ca.
Sat Jun 25, 2022 4:50 pm
Hershey spaes

Last post by Terry_007 « Sat Jun 25, 2022 4:02 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by RichJ » Thu Jun 23, 2022 4:33 am » in General Discussion Forum (started 2019)

First post

Do any of you guy's have any spots that you are not going to be using?
Rich 561 262 o 3 9 3 call any time.

Last post

Are you an AACA member? You need to be an AACA member to vend. Hershey Region website has all the info you'll need.
Terry I

1 Replies

302 Views

Last post by Terry_007
Sat Jun 25, 2022 4:02 pm
Grade meter inclinometer For Sale

Last post by Layden Butler « Sat Jun 25, 2022 3:28 pm
Posted in Classifieds - Parts
Replies: 3
by Layden Butler » Fri Apr 29, 2022 5:05 pm » in Classifieds - Parts

First post

Marked with grade steepness, rare unusual gauge, works great!
$165, domestic postage $10.

Last post

So back to the top!

3 Replies

605 Views

Last post by Layden Butler
Sat Jun 25, 2022 3:28 pm
Brass magneto post original F/S

Last post by Layden Butler « Sat Jun 25, 2022 3:26 pm
Posted in Classifieds - Parts

by Layden Butler » Sat Jun 25, 2022 3:26 pm » in Classifieds - Parts

Original magneto post for brass era Model T, $45, domestic postage $10.

0 Replies

129 Views

Last post by Layden Butler
Sat Jun 25, 2022 3:26 pm
Magneto post oiler original F/S

Last post by Layden Butler « Sat Jun 25, 2022 1:34 pm
Posted in Classifieds - Parts

by Layden Butler » Sat Jun 25, 2022 1:34 pm » in Classifieds - Parts

Original accessory magneto post oiler for pre 1926 Model Ts, good shape, you add the tubing, fittings and route to your favorite place at the front of the engine. Will include set of 3 original mounting screws. $45, domestic postage $10.

0 Replies

136 Views

Last post by Layden Butler
Sat Jun 25, 2022 1:34 pm
America First radiator cap ornament FOR SALE

Last post by Dropacent « Sat Jun 25, 2022 12:34 pm
Posted in Classifieds - Parts
Replies: 5
by Dropacent » Wed Jun 22, 2022 10:24 pm » in Classifieds - Parts

First post

Louis V. Aronson was a very interesting man. An immigrant from Belgium, Louis was a very talented artist and entrepreneur. He founded the Art Metal Co in New York early on, but is most famous for the creation and manufacture of Ronson Lighters. Ronson went on to join with Remington and then Zippo. Lots of famous names here.
One of his earliest...

Last post

Thanks Ed! I really love the history . 3 have been spoken for , so maybe a bump to the top .

5 Replies

656 Views

Last post by Dropacent
Sat Jun 25, 2022 12:34 pm
1917 Speedster for sale

Last post by spadpilot « Sat Jun 25, 2022 12:18 pm
Posted in Classifieds - Vehicles

by spadpilot » Sat Jun 25, 2022 12:18 pm » in Classifieds - Vehicles

1917 Model T Ford Speedster for Sale
This car has never been driven. Zero miles!
The bones of this project were discovered in an abandoned mine in the
California Gold country about 5 years ago.
All frame rails, cross members, suspension and steering components have been
blasted and powder coated. The engine has been completely rebuilt with...

0 Replies

270 Views

Last post by spadpilot
Sat Jun 25, 2022 12:18 pm
F/S 1916 Model T camper fold out tent trailer lowered to $4,900

Last post by spedur « Sat Jun 25, 2022 12:15 pm
Posted in Classifieds - Vehicles
Replies: 2
by spedur » Thu Jun 23, 2022 10:55 am » in Classifieds - Vehicles

First post

Price now LOWERED to $4,900...... Made by Warner of speedometer fame. Pat. July 4, 1916. A original with older restoration and VG newer canvas top. 2 fold out beds with springs and mattress s. Out of museum after 50 years. These don't come up for sale often. Tow it or show it or display it with your Model T. Asking $7,000 may consider offer....

Last post

just lowered to $4,900

2 Replies

543 Views

Last post by spedur
Sat Jun 25, 2022 12:15 pm
1 owner 1924 Model T roadster

Last post by BobP « Sat Jun 25, 2022 11:56 am
Posted in Classifieds - Vehicles
Replies: 2
by BobP » Sat Jun 25, 2022 11:53 am » in Classifieds - Vehicles

First post

For sale, 1924 Model T roadster, has been in the same family since new. Just removed from long term storage. Very solid straight all original car with one old repaint. It still has the original upholstery with a gunny sack cover. Wheels are in very good shape. It has demountable rims and electric start. Engine turns over.$5,900. S. Mn.

Last post

More pics......

2 Replies

256 Views

Last post by BobP
Sat Jun 25, 2022 11:56 am
PerspecTive phoTo

Last post by Bryant « Sat Jun 25, 2022 11:34 am
Posted in General Discussion Forum (started 2019)
Replies: 87
by Bryant » Tue Feb 22, 2022 6:37 am » in General Discussion Forum (started 2019)

First post

The model T. How do you see it? 46A57EE6-DF6F-4561-A777-C57F8C57F66B.jpeg

Last post

DF7E3030-FAC6-42F3-A490-50F5759403A7.jpeg Gowland and Gowland Toy car (1952) says 1915 appears to be a center door

87 Replies

6060 Views

Last post by Bryant
Sat Jun 25, 2022 11:34 am
NOS dip stick, hood handles, data plates

Last post by Melba Nolan « Sat Jun 25, 2022 11:21 am
Posted in Classifieds - Parts
Replies: 3
by Melba Nolan » Thu Jun 23, 2022 10:22 pm » in Classifieds - Parts

First post

For sale: bowl gaskets for holly,nh,king L4 75 cents each
freeze plugs, brass and regular $3 each
top saddle pads and straps $16.25 pair
steering wheel nut brass 6/13 $14 each chrome $9 17/27
connecting rod and nut $9.25 each
brake camshaft bushing $2.25 each
manifold gasket, original style $8.65 each
brake shoe spring 6 1/2 long $1.75 each
hood...

Last post

chrome steering wheel nut sold pending payment

3 Replies

324 Views

Last post by Melba Nolan
Sat Jun 25, 2022 11:21 am
Bethlehem 360 Spark Plugs

Last post by Tadpole « Sat Jun 25, 2022 11:14 am
Posted in General Discussion Forum (started 2019)
Replies: 6
by Tadpole » Wed Jun 22, 2022 2:57 pm » in General Discussion Forum (started 2019)

First post

Does anyone have experience running these 360 one-point style plugs? Will they work in a T?

Last post

Thank you all for the input, I passed them up for the reasons you provided. But if anyone is still interested they are on T-bay for sale, six of them tested.

6 Replies

350 Views

Last post by Tadpole
Sat Jun 25, 2022 11:14 am
1911 Kingston Coil Box

Last post by ThreePedalTapDancer « Sat Jun 25, 2022 11:03 am
Posted in Classifieds - Parts
Replies: 4
by ThreePedalTapDancer » Wed Jun 22, 2022 11:34 am » in Classifieds - Parts

First post

Original 1911 Kingston Coil Box. Original box with stamped matching lid. Original switch. 4 correct Kingston offset contact coils. Includes Kingston key. Box has been cosmetically restored, with correct cherry stain, leaving wood grain texture exposed. Original nameplate. Original brass lid clasps. The contacts are all in nice shape, and the solid...

Last post

Includes key.

4 Replies

279 Views

Last post by ThreePedalTapDancer
Sat Jun 25, 2022 11:03 am
***WANTED** Ford Model TT

Last post by Gordon C « Sat Jun 25, 2022 10:58 am
Posted in Classifieds - Parts
Replies: 1
by rustaholic » Fri Jun 24, 2022 11:42 am » in Classifieds - Parts

First post

Looking for original Ford Model TT closed cab trucks needing restoration, unfinished TT projects, not interested in restored or show vehicles.

Last post

Have a 27 closed cab if you are interested
gclaytonsr@yahoo.com

1 Replies

177 Views

Last post by Gordon C
Sat Jun 25, 2022 10:58 am
HIMICO Transmission

Last post by namdc3 « Sat Jun 25, 2022 10:41 am
Posted in Classifieds - Parts
Replies: 1
by namdc3 » Sat Jun 25, 2022 10:40 am » in Classifieds - Parts

First post

This Himico accessory transmission made by Hinkley Motors replaces Ford's planetary gear transmission with a 3-speed+R sliding gear, lever shifted transmission and pan. It retains a rearward transmission drum brake and does not require shortening the drive shaft. This unit also has the optional auxiliary low (or fourth forward speed), which was...

Last post

IMG_0944.JPG IMG_0945.JPG IMG_0947.JPG IMG-0964.jpg IMG-6443.jpg

1 Replies

242 Views

Last post by namdc3
Sat Jun 25, 2022 10:41 am
20 horsepower !

Last post by Been Here Before « Sat Jun 25, 2022 10:06 am
Posted in General Discussion Forum (started 2019)
Replies: 21
by Rich P. Bingham » Thu Jun 23, 2022 12:22 pm » in General Discussion Forum (started 2019)

First post

Contemplating the relative power of a Model T.

The legendary 20 mule teams pulled ten ton loads of borax c. 1886-89. Could a single Model T have done that job ?

Comparatively, I've got a toy John Deere 3005. Its 3cyl. Yanmar diesel is rated at 27 hp. The ZTR lawn mower is rated at 22 hp. I have a feeling Lizzie more than equals their muscle but...

Last post

Information on the 490 is scarce. 3.7 X 4 bore/stroke, overhead valve, HP variously given as from 20 to 27 HP. No figures for torque, compression, peak speeds.

I believe that the numbers for specs of a Ford T and Chevy 490 are:

Model t - 177 cu/in - 20 hp
Chevy 490 - 171 cu/in - 26 hp

Measured on a dynamometer originally designed for the...

21 Replies

847 Views

Last post by Been Here Before
Sat Jun 25, 2022 10:06 am
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by Herb Iffrig « Sat Jun 25, 2022 9:52 am
Posted in OT - Off topic
Replies: 3522
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

32

33

34

35

36
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

Wheelbarrow.JPG

I think I heard about this a long time ago. The game was to catch a chicken while being pushed in a wheelbarrow. There were teams from each neighborhood in Chugwater. It was kind 'a of sideshow at the Regatta to keep the kids busy. I never thought I would see a photo about it.
3522 Replies

591760 Views

Last post by Herb Iffrig
Sat Jun 25, 2022 9:52 am
tool, spindle arm fan bracket plus

Last post by Melba Nolan « Sat Jun 25, 2022 9:45 am
Posted in Classifieds - Parts

by Melba Nolan » Sat Jun 25, 2022 9:45 am » in Classifieds - Parts

For Sale: #3Z1179 flywheel capscrew wrench $30
windshield slide arm, knob and bracket 26/27 $15
ratchet for starting crank $10
steering gear bracket T9320 Ford Script $25
spindle arm #270B Ford script $25
fan bracket #T604A Ford script 13/16 $25
fan bracket #t604 Ford Script 17/25 $20
starter drive cover $10
carb adjusting rod 18 1/2 long 17/25...

0 Replies

91 Views

Last post by Melba Nolan
Sat Jun 25, 2022 9:45 am
Wanted: Usable/Repairable High Radiator

Last post by Papa « Sat Jun 25, 2022 9:14 am
Posted in Classifieds - Parts
Replies: 2
by Papa » Fri Jun 24, 2022 11:58 am » in Classifieds - Parts

First post

Looking for a high radiator for a non restored '27 T. Any condition other than junk is fine. I will pay for shipping or pick up if possible. Thanks

Last post

Email sent.

2 Replies

169 Views

Last post by Papa
Sat Jun 25, 2022 9:14 am
FS Black & Brass Side Lights.

Last post by Larry « Sat Jun 25, 2022 8:57 am
Posted in Classifieds - Parts

by Larry » Sat Jun 25, 2022 8:57 am » in Classifieds - Parts

Very nice pair of early black and brass side lights. They are not marked I’m not sure who made them. Burners look the same as T burners and are in exceptional condition as are the lenses. They appear to have had very little use.
$325 + Shipping

A2DB5F6D-BBF7-407A-83DD-81EAF4281A16.png

0 Replies

107 Views

Last post by Larry
Sat Jun 25, 2022 8:57 am
FS Model T Radiator Mascot

Last post by Larry « Sat Jun 25, 2022 8:46 am
Posted in Classifieds - Parts

by Larry » Sat Jun 25, 2022 8:46 am » in Classifieds - Parts

Very nice model T radiator mascot. Not sure who it is. Possibly Jack jumping over the candlestick.
$125+shipping.

3CEBE9B7-9F0E-4FBF-A60C-4CA8E6CE685D.png

0 Replies

161 Views

Last post by Larry
Sat Jun 25, 2022 8:46 am
WTB: 26-27 Steering Column

Last post by SurveyKing « Sat Jun 25, 2022 8:20 am
Posted in Classifieds - Parts
Replies: 1
by Scott C. » Sat Jun 25, 2022 1:37 am » in Classifieds - Parts

First post

I am looking for a good 26-27 steering column.

Last post

If your still looking, send me your email and I will send pictures of one I have. DanielSnell2@twc.com

1 Replies

80 Views

Last post by SurveyKing
Sat Jun 25, 2022 8:20 am
SOLD Original accessory foot feed SOLD

Last post by RVA23T « Sat Jun 25, 2022 7:35 am
Posted in Classifieds - Parts
Replies: 5
by Dropacent » Fri Jun 24, 2022 2:36 pm » in Classifieds - Parts

First post

SOLD number of years ago there a was T touring for sale locally. I went to look at it and there were a lot of accessories on it. I didn’t buy the car, but the people sold me the accessories. I thought the foot feed was particularly interesting and when I offered them $50 for it, they let me take it off. I have since beadblasted and powder coated...

Last post

Thanks, feed was confusing me.

5 Replies

328 Views

Last post by RVA23T
Sat Jun 25, 2022 7:35 am
Tire Tube Size

Last post by Steve Jelf « Fri Jun 24, 2022 11:35 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by soonerdg » Fri Jun 24, 2022 3:00 pm » in General Discussion Forum (started 2019)

First post

Hello All!

I'm brand new to the forum. This is my first post.

I have a 1925 Coupe that I inherited from my grandad. It has been in a barn for the last 20+ years and I'm working on getting it back in running condition.

Model T small.jpg

First thing to address is the tires. I've recently ordered the tires and tubes, however, the tubes that...

Last post

file-2.jpg
Here you go, Dan. A couple of links for anybody new to the Model T game:

5 Replies

248 Views

Last post by Steve Jelf
Fri Jun 24, 2022 11:35 pm
Engines

Last post by marctee « Fri Jun 24, 2022 11:11 pm
Posted in Classifieds - Parts
Replies: 5
by Model T Matt » Sun May 08, 2022 7:20 pm » in Classifieds - Parts

First post

Have Three Engines - one built May of 1920 one built July of 1920 and one built Oct. of 1923 asking $150.00 each as is you can come and open them up to check out call Matt 503-824-2681

Last post

Great job !

5 Replies

1370 Views

Last post by marctee
Fri Jun 24, 2022 11:11 pm
Exhaust Cut Out and Pedal

Last post by Model T Matt « Fri Jun 24, 2022 10:41 pm
Posted in Classifieds - Parts
Replies: 6
by Model T Matt » Sun Jun 19, 2022 7:44 pm » in Classifieds - Parts

First post

For Sale old Exhaust Whistle that needs a couple tubes-comes with a good cut out and three pedals to operate the cut out asking $60.00 for all call Matt 503-824-2681

Last post

Held for Mark Thanks

6 Replies

494 Views

Last post by Model T Matt
Fri Jun 24, 2022 10:41 pm
Unrestored 1924 Coupe

Last post by BobP « Fri Jun 24, 2022 10:07 pm
Posted in Classifieds - Vehicles
Replies: 20
by BobP » Tue May 03, 2022 9:55 pm » in Classifieds - Vehicles

First post

Original unrestored 1924 Coupe. No rust, All original interior that is deteriorated. All original glass intact. good top. Body is excellent. Fenders have usual dings. Has been in long term storage until yesterday. Engine turns over. have not tried to start. Has good Mn. Title. $4,800. No texting. 507 458 6778. Located 50 miles south of St. Paul,...

Last post

Coupe is sold, Thanks .

20 Replies

3747 Views

Last post by BobP
Fri Jun 24, 2022 10:07 pm
Model T Roaster

Last post by Bryant « Fri Jun 24, 2022 10:06 pm
Posted in OT - Off topic
Replies: 1
by TXGOAT2 » Fri Jun 24, 2022 8:09 am » in OT - Off topic

First post

I'm located halfway between 2 NWS reporting stations, with each one being about 20 miles from here. Yesterday afternoon, both stations were reporting 100F temperatures and very light winds, clear skies, and low humidity. Both the actual temperature and heat index were at 100F. I decided to go for a drive. I traveled about 30 miles and found the...

Last post

I just realized it says “roaster” :lol:

1 Replies

164 Views

Last post by Bryant
Fri Jun 24, 2022 10:06 pm

Search found 247 matches

Go to advanced search