MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 212 matches

Topics

Replies

Views

Last post

Fan reassembly

Last post by TXGOAT2 « Fri Dec 05, 2025 10:41 am
Posted in General Discussion Forum
Replies: 36
by Petrah Phyre » Thu Dec 23, 2021 5:04 pm » in General Discussion Forum

First post

Just performed a clean up of my '26 fan assembly. I used moly bearing grease. Correct or no? My rear cap did not have a felt washer underneath. Is that required? Seems like it should help with grease loss.

Last post

My late-style fan doesn't leak much oil, if any. I'm not sure why. (I don't fill it completely full of oil) Like most all old cars without positive crankcase ventilation, over miles of driving, the oil mist from the filler cap and throttle rod openings accumulates on underhood areas as a light film. If you drive on dirt roads, the film will...

36 Replies

4123 Views

Last post by TXGOAT2
Fri Dec 05, 2025 10:41 am
My car dosen't like me.

Last post by TXGOAT2 « Fri Dec 05, 2025 10:27 am
Posted in General Discussion Forum
Replies: 8
by brendan.hoban » Fri Dec 05, 2025 2:38 am » in General Discussion Forum

First post

I have a 22 Tourer, RHD, no starter model, no generator.

It's a standard T that I have restored with commutator, trembler coils and magneto and has always worked well.

Lately, it has begun to hate me by backfiring on starting, it tries to rip my arm off.

I'm over 80 and a bit slow to comprehend why it used to be good but it now isn't.

I...

Last post

It won't affect kickback, but using a suitable motor oil can make starting easier. All the various linkages need to be in good shape and proper adjustment for safe starting and good performance once started. Dragging bands or a dragging clutch can make starting difficult, among other undesirable behaviors.

8 Replies

176 Views

Last post by TXGOAT2
Fri Dec 05, 2025 10:27 am
Crazy? tow question

Last post by big2bird « Fri Dec 05, 2025 10:22 am
Posted in General Discussion Forum
Replies: 56
by varmint » Thu Nov 20, 2025 6:54 pm » in General Discussion Forum

First post

When you are driving along at speed and then put the Model T in neutral, so that it's coasting...the engine is turning but the rear wheels still going at speed, and this does not hurt the car?

Can't we flat tow the Model T in neutral with the engine running?

Last post

I agree with Jerry.

In a parade, you pull the brake levers to neutral, and pump low all day. As long as that washing machine is churning, oil is everywhere.

These cars were not driven with kid gloves. I only ever saw one bronze yoke worn badly. It could have had a gazillion miles, and still worked.

Tow it in gear with plugs out.

56 Replies

1558 Views

Last post by big2bird
Fri Dec 05, 2025 10:22 am
FS SIDELIGHT BRACKET SET

Last post by Mark Chaffin « Fri Dec 05, 2025 9:50 am
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Thu Dec 04, 2025 11:06 pm » in Classifieds - Parts

First post

Sidelight bracket set for 26/27 Roadster and Touring. Price is $35.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251204_164633.jpg

Last post

Going to Charlie.

2 Replies

139 Views

Last post by Mark Chaffin
Fri Dec 05, 2025 9:50 am
FS 1909-1913 Hand Crank Ratchet $35.00

Last post by slang250 « Fri Dec 05, 2025 9:27 am
Posted in Classifieds - Parts
Replies: 2
by Tparts » Thu Dec 04, 2025 3:59 pm » in Classifieds - Parts

First post

FS Original 1909-1913 Hand Crank Ratchet in good usable shape. $35.00 plus shipping. Lang’s 1-800-872-7871

Last post

Hello John,

We sent you an email. We got it set aside with your name on it.

Thank You

2 Replies

220 Views

Last post by slang250
Fri Dec 05, 2025 9:27 am
Found on the shelf.., Vintage Lamp Cord/Appliance Cord

Last post by South Park Zephyr « Fri Dec 05, 2025 9:17 am
Posted in Classifieds - Parts
Replies: 18
by Henry K. Lee » Wed Dec 03, 2025 9:56 am » in Classifieds - Parts

First post

IMG_5993.jpeg

IMG_5992.jpeg

IMG_5991.jpeg

Vintage cloth wiring…, $85.00 with shipping. Email if interested.

Last post

I think as important as these cars are to us, we have a limited number of people that are interested in purchasing what we have to offer.
How many of the active members and guests here visit each day, or even multiple times per day?
Getting our item(s) if front of the right person at the right time can lead to a sale. How many times have we...

18 Replies

807 Views

Last post by South Park Zephyr
Fri Dec 05, 2025 9:17 am
FS Cast Iron Dogleg Intake Manifold SOLD

Last post by slang250 « Fri Dec 05, 2025 9:11 am
Posted in Classifieds - Parts
Replies: 3
by Tparts » Thu Dec 04, 2025 4:19 pm » in Classifieds - Parts

First post

Very unusual Cast iron Intake Manifold (Accessory???)High Volume??? In good condition. SOLD. plus shipping
Lang’s 1-800-872-7871

( Please notice this intake is slightly shorter then an original)
The Intake on the left is shown for comparison and is NOT included.

Last post

Manifold is sold to Shannon.

Thank You

3 Replies

269 Views

Last post by slang250
Fri Dec 05, 2025 9:11 am
The Gilsonite mine-video on youtube

Last post by South Park Zephyr « Fri Dec 05, 2025 8:56 am
Posted in General Discussion Forum
Replies: 1
by Herb Iffrig » Thu Dec 04, 2025 8:38 am » in General Discussion Forum

First post

I finally watch this to see what it was about.

Last post

Cool video Herb,
There is a Model T connection here that you might not know.
The Railroad that was built to service the mine modified a T for inspection work.
Around 2008 I was approached about helping to recreate it by the CMO of the Cumbres and Toltec railroad. He moved on and the project died though.

1 Replies

218 Views

Last post by South Park Zephyr
Fri Dec 05, 2025 8:56 am
WTB Dash for 26 Fordor and belt molding

Last post by tom_strickling « Fri Dec 05, 2025 8:25 am
Posted in Classifieds - Parts

by tom_strickling » Fri Dec 05, 2025 8:25 am » in Classifieds - Parts

The title says it all. I need a dash with or without instruments for a 1926 Ford Model T Fordor.
Please let me know what you have.
Also need rear belt molding for same car. Entire or at least a curve with about a foot of straight on it.

Thank you.

0 Replies

22 Views

Last post by tom_strickling
Fri Dec 05, 2025 8:25 am
12/2 7:00pm PST Live Stream & ID Help - Unloading a Model T Haul

Last post by Allan « Fri Dec 05, 2025 7:15 am
Posted in General Discussion Forum
Replies: 22
by Matt in California » Tue Dec 02, 2025 8:28 pm » in General Discussion Forum

First post

I just picked up a big estate sale haul of Model T parts — everything from scrap to salvageable pieces and some real mystery items. I used to rely on a close friend who knew Model T parts inside and out, but I recently lost him, so I’m hoping for a little help from the community.

I’ll be going live on YouTube in about 1½ hours to unload and sort...

Last post

The C over H forge mark indicates it was made by Cleveland Hardware I believe. I found their mark on a few of the forgings on my 1915 Canadian tourer.

Allan from down under.

22 Replies

552 Views

Last post by Allan
Fri Dec 05, 2025 7:15 am
Rear crossmember question

Last post by AndreFordT « Fri Dec 05, 2025 6:26 am
Posted in General Discussion Forum
Replies: 5
by frontyboy » Thu Dec 04, 2025 11:42 pm » in General Discussion Forum

First post

I remember there was a guy making a lower crown rear crossmembers to lower a T. He used to vend at the old Bakersfield right behind me. He also had new polished aluminum disc wheels.I can not seem to find any information for him.

He made a replacement rear cross members that allowed you to lower the frame. I think it was a copy of the European...

Last post

This I found three years ago.

Maybe an Idea to do it your self.

Andre
Belgium

5 Replies

105 Views

Last post by AndreFordT
Fri Dec 05, 2025 6:26 am
WTB……Ross Steering

Last post by bobster1 « Fri Dec 05, 2025 6:23 am
Posted in Classifieds - Parts
Replies: 1
by WorldChamp1914 » Thu Dec 04, 2025 11:30 pm » in Classifieds - Parts

First post

Any original or reproductions out there?

Last post

I'VE GOT ONE THAT'S IN GOOD CONDITION, BOUGHT IT SEVERAL YEARS AGO FOR A SPEEDSTER PROJECT, BUT WENT A DIFFERENT DIRECTION. CONTACT ME AND I'll TAKE PICTURES FOR YOU. I WANT $450 FOR IT.

1 Replies

128 Views

Last post by bobster1
Fri Dec 05, 2025 6:23 am
A 1915 in the LA area?

Last post by Aussie16 « Fri Dec 05, 2025 4:09 am
Posted in General Discussion Forum
Replies: 7
by HarryBulkeley » Wed Dec 03, 2025 12:41 pm » in General Discussion Forum

First post

Here is a strange request. I am trying to get somebody to make a bra for the front of my 1915 Coupelet. He has made one for a 1917 and still has the pattern but needs a 1915 to see what changes it needs to make it fit. Is there anybody near Hesperia, CA that might be willing to take their 1915 to the shop for him to measure? I would be very...

Last post

Any pictures of your Coupelet Harry? Have you registered it with the Coupelet owners page?

7 Replies

426 Views

Last post by Aussie16
Fri Dec 05, 2025 4:09 am
Rear crossmember question

Last post by TRDxB2 « Fri Dec 05, 2025 2:37 am
Posted in General Discussion Forum
Replies: 4
by frontyboy » Thu Dec 04, 2025 11:50 pm » in General Discussion Forum

First post

I remember there was a guy making a lower crown rear crossmembers to lower a T. He used to vend at the old Bakersfield right behind me. He also had new polished aluminum disc wheels.I can not seem to find any information for him.

He made a replacement rear cross members that allowed you to lower the frame. I think it was a copy of the European...

Last post

Here is a discussion about European chassis that were dropped via different front spindles & rear crossmember

english rear cross member.jpg
---
375954.jpg

--
For the front
202430.jpg
202363.jpg

4 Replies

68 Views

Last post by TRDxB2
Fri Dec 05, 2025 2:37 am
Interesting project - coil/magneto/flywheel tester

Last post by Rayboy « Thu Dec 04, 2025 11:05 pm
Posted in General Discussion Forum
Replies: 33
by browning » Tue Dec 02, 2025 12:21 pm » in General Discussion Forum

First post

I'm still having fun playing with rare earth magnet replacements for model t magnetos, just for giggles. They work well but it is hard to quantify outputs and I'm not crazy enough to build another engine every time I make a modification. I hit on the idea of using a defective engine block/crank/cam and driving it with a variable speed motor. Kevin...

Last post

Browning, Thanks for the great posts. I will look forward to future posts on the subject. Ray

33 Replies

826 Views

Last post by Rayboy
Thu Dec 04, 2025 11:05 pm
FS Solid Brass Tailight Bracket made by Mora $65.00

Last post by Tparts « Thu Dec 04, 2025 10:10 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Thu Dec 04, 2025 2:56 pm » in Classifieds - Parts

First post

Very Nice Original solid brass Tailight Bracket for 1909-14 style Spade mount Tailight. Mounts to the side of the body $65.00 plus shipping
Lang’s 1-800-872-7871.

Last post

Good to know. Thank you

2 Replies

216 Views

Last post by Tparts
Thu Dec 04, 2025 10:10 pm
FS FORD LUG NUT WRENCH T-2839-R (SOLD)

Last post by Mark Chaffin « Thu Dec 04, 2025 9:19 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Dec 04, 2025 7:29 pm » in Classifieds - Parts

First post

Ford T Wrench for wire wheel lug nuts T-2839-R. Price is $50.00 plus $8.50 shipping. Mark Chaffin (951) 805-0928

20251204_160115.jpg

20251204_160125.jpg

Last post

Going to Dan. Thank you

1 Replies

169 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 9:19 pm
Mid winter Clinic 2026 McPherson Kansas

Last post by dr1960 « Thu Dec 04, 2025 8:55 pm
Posted in General Discussion Forum
Replies: 3
by Afrazer » Mon Dec 01, 2025 10:41 am » in General Discussion Forum

First post

That time of year again!

Jan 16-17 2026 will be our schedule days!!

We have a block of rooms available at a discount of $99 a night at Hampton Inn in McPherson Kansas. Cut off to get your discounted room date is Dec 26th so book fast!

Can’t wait to see old and new faces!

Aaron Frazer

Hotel information:

200 N Centennial Dr
McPherson, KS...

Last post

I'd love to see a presentation on rear axle rebuilds. I need to do my 1915 in the near future.

3 Replies

304 Views

Last post by dr1960
Thu Dec 04, 2025 8:55 pm
Rebuilding 1912 Heinze Coils

Last post by MKossor « Thu Dec 04, 2025 8:39 pm
Posted in General Discussion Forum
Replies: 24
by Darren J Wallace » Sun Nov 30, 2025 2:18 pm » in General Discussion Forum

First post

While my hand heals from surgery, I’m slowly getting back into doing things. I started out this weekend by doing something small and light, and for myself. I’ve had an unrestored spare set of late 1912 Heinze ignition coils for my 1913 Canadian Ford. I decided to rebuild them. Since my car is a very unrestored cosmetically, but very well...

Last post

The Heinze coil design is actually superior to the Ford/KW coil design.

Its unfortunate the Heinze coil has earned a poor reputation for performance because of the limitations of the test and tuning methodologies available back in the day. That's because tuning a Heinze coil using average current as an indirect approximation of time to fire spark...

24 Replies

682 Views

Last post by MKossor
Thu Dec 04, 2025 8:39 pm
FS EXHAUST MANIFOLD NEW (SOLD)

Last post by Mark Chaffin « Thu Dec 04, 2025 7:41 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Dec 04, 2025 5:37 pm » in Classifieds - Parts

First post

New exhaust manifold. Dealer retail is $89.95. This one is $75.00 plus $18.50 domestic shipping. I have two available. Mark Chaffin (951) 805-0928

20251204_134507.jpg

Last post

Both manifolds have been sold. Thank you

1 Replies

204 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 7:41 pm
FS FORD T WRENCH 5-Z2038

Last post by Mark Chaffin « Thu Dec 04, 2025 7:27 pm
Posted in Classifieds - Parts

by Mark Chaffin » Thu Dec 04, 2025 7:27 pm » in Classifieds - Parts

Ford T wrench 5-Z2038. Model A & B Connecting Rod Nut tool (1928-1934) 21/32 nut. Price is $40.00 plus $8.50 shipping. Mark Chaffin (951) 805-0928

20251204_155954.jpg

20251204_160006.jpg

0 Replies

129 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 7:27 pm
Brass Twist Oilers, Threaded, set of 12, NEW.

Last post by Pep C Strebeck « Thu Dec 04, 2025 7:12 pm
Posted in Classifieds - Parts
Replies: 3
by Pep C Strebeck » Wed Dec 03, 2025 7:15 pm » in Classifieds - Parts

First post

Set of 12 Brass Threaded Twist Oilers for early cars, new reproduction. These are the threaded oilers for the spindle bolts, tie rod bolts and shackles, there are 2 sets available. The price is $115 per set, shipping included (in the U.S.), payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail...

Last post

Both sets have sold. Thank you to everyone that took the time to look, much appreciated.

3 Replies

289 Views

Last post by Pep C Strebeck
Thu Dec 04, 2025 7:12 pm
FS APCO RADIUS ROD CAPS (SOLD)

Last post by Mark Chaffin « Thu Dec 04, 2025 7:05 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Dec 04, 2025 5:34 pm » in Classifieds - Parts

First post

Set of four APCO radius rod caps with new ball caps, springs and threaded plugs. Price for the set of four $100.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251204_141944.jpg

Last post

Going to Dean. Thank you!

1 Replies

157 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 7:05 pm
FS STRAIGHT THROUGH CARBURETOR (SOLD)

Last post by Mark Chaffin « Thu Dec 04, 2025 6:08 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Thu Dec 04, 2025 5:32 pm » in Classifieds - Parts

First post

Nice straight through carburetor ready for rebuild. Complete and no gas inlet cracks. $125.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251204_093940.jpg

20251204_093956.jpg

Last post

Going to Rick. Thank you

1 Replies

208 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 6:08 pm
FS DIFFERENTIAL

Last post by Mark Chaffin « Thu Dec 04, 2025 5:35 pm
Posted in Classifieds - Parts

by Mark Chaffin » Thu Dec 04, 2025 5:35 pm » in Classifieds - Parts

One very nice used rear axle differential $100.00 plus $18.50 shipping. Mark Chaffin (951) 805-0928

20251204_141451.jpg

20251204_141512.jpg

0 Replies

183 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 5:35 pm
FS vertical crank holder and mount

Last post by Eric Edwards « Thu Dec 04, 2025 5:13 pm
Posted in Classifieds - Parts

by Eric Edwards » Thu Dec 04, 2025 5:13 pm » in Classifieds - Parts

Brinze Vertical crank handle holder holds the crank handle in vertical position $92. Post included

0 Replies

175 Views

Last post by Eric Edwards
Thu Dec 04, 2025 5:13 pm
'27 frame, motor, loose parts

Last post by Martinbuilt « Thu Dec 04, 2025 4:52 pm
Posted in Classifieds - Parts

by Martinbuilt » Thu Dec 04, 2025 4:52 pm » in Classifieds - Parts

I'm going to be shifting some things around in the shop, so if i can re-home this soon...
Otherwise, everything gets buried until i'm bored.
No title. I wanted to build a pig 'n ford type racer.
Super nice frame. Clean, painted, lovely. (I drilled out the rivets, and removed the running board supports, but they are here.)
Numbers are present.
'27...

0 Replies

152 Views

Last post by Martinbuilt
Thu Dec 04, 2025 4:52 pm
FS Poor Man’s Fronty/Rajo OHV. Speed equipment

Last post by Eric Edwards « Thu Dec 04, 2025 4:34 pm
Posted in Classifieds - Parts

by Eric Edwards » Thu Dec 04, 2025 4:34 pm » in Classifieds - Parts

Crack free. Dual port intake OHV Chevy. adapter plate required
Complete with rocker train. Valves removed $750 shipping included to lower 48 and Canada. 705 828 5405
Edwards

0 Replies

137 Views

Last post by Eric Edwards
Thu Dec 04, 2025 4:34 pm
FS: Brass Oil Sight Gauge

Last post by George House « Thu Dec 04, 2025 4:27 pm
Posted in Classifieds - Parts
Replies: 2
by George House » Wed Nov 26, 2025 3:42 pm » in Classifieds - Parts

First post

…Original, polished up, with operable petcock and intact glass.
Only $25 + free shipping in lower 48
gwhouse731(at)gmail(dot)com

Last post

SOLD!..thank you Chris and MTFCA

2 Replies

405 Views

Last post by George House
Thu Dec 04, 2025 4:27 pm
Wanted: KRW pan jig rear fixture

Last post by Sean Butler « Thu Dec 04, 2025 4:08 pm
Posted in Classifieds - Parts
Replies: 5
by RajoRacer » Mon Dec 01, 2025 6:27 pm » in Classifieds - Parts

First post

Anyone happen to have the rear cone mount, cone & shaft for a mint original KRW crankcase jig available ? I'll make it worth your while !

Last post

Good on you!

5 Replies

425 Views

Last post by Sean Butler
Thu Dec 04, 2025 4:08 pm
FS BRAKE ROD SUPPORT BRACKET SET NOS (SOLD)

Last post by Mark Chaffin « Thu Dec 04, 2025 4:01 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Wed Dec 03, 2025 7:24 pm » in Classifieds - Parts

First post

Brake Rod Support Bracket Set Ford Script NOS. Price is $20.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251203_160648.jpg

Last post

Going to Rick. Thank you

1 Replies

170 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 4:01 pm
MEME of the week

Last post by Kaiser « Thu Dec 04, 2025 3:52 pm
Posted in OT - Off topic
Replies: 62
by ironhorse » Tue Mar 11, 2025 9:26 am » in OT - Off topic

First post

Screenshot_7-3-2025_10813_www.google.com_.jpeg

Last post

Note to oneself: remember to keep the rubber side down !
tumblr_nszkk1dRmi1qc2alio1_500.jpg

62 Replies

23677 Views

Last post by Kaiser
Thu Dec 04, 2025 3:52 pm
Posting Comments in the Classifieds

Last post by Bryant « Thu Dec 04, 2025 3:38 pm
Posted in OT - Off topic
Replies: 4
by Bryant » Wed Dec 03, 2025 2:13 pm » in OT - Off topic

First post

This a Make-believe revised copy of the posting rules in the car section. CAN we apply this to the classifieds section to?
not only will it keep the classifieds nice and Tidey but also make it so I person can just sell their parts or buy parts without OPINIONS...
and if someone has something important or useful to say they can always just message...

Last post

Valid point and makes sense, also has been helpful in the past. real time is also important.
If a random poster makes a public correction should a bystander reading them know the information is accurate just because it was posted?
it seems trust becomes the issue either way
I would think sellers would check there emails often because they are...

4 Replies

195 Views

Last post by Bryant
Thu Dec 04, 2025 3:38 pm
FS 1913-14 Brass Horn Rim and Screen $65.00

Last post by Tparts « Thu Dec 04, 2025 2:32 pm
Posted in Classifieds - Parts

by Tparts » Thu Dec 04, 2025 2:32 pm » in Classifieds - Parts

Early reproduction Horn Rim and Screen for 1913-14 brass horns. Originally retailed for $89.95. Now available for $69.50 plus shipping
Lang’s 1-800-872-7871

0 Replies

84 Views

Last post by Tparts
Thu Dec 04, 2025 2:32 pm
Brass Hubcap set of 4, 1913-1916, new reproduction.

Last post by Runabout « Thu Dec 04, 2025 1:56 pm
Posted in Classifieds - Parts
Replies: 1
by Pep C Strebeck » Wed Dec 03, 2025 7:16 pm » in Classifieds - Parts

First post

One set of 4 (new in package) Brass Hubcaps, 1913 to 1916, price is $115 shipping included (in the U.S.). Payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail through the Forum. If you have any question please do not hesitate to ask.

IMG_7269.JPG
IMG_7267.JPG

Last post

Email sent Pep.

1 Replies

158 Views

Last post by Runabout
Thu Dec 04, 2025 1:56 pm
For Sale: Accessory Brass Electric " Maxim" Horn

Last post by GGZ « Thu Dec 04, 2025 12:21 pm
Posted in Classifieds - Parts
Replies: 4
by GGZ » Mon Oct 06, 2025 3:38 pm » in Classifieds - Parts

First post

A Maxim accessory electric horn with a brass bell. 10 long by 5 diameter. Has its original bakelite wire knobs and mounting bracket. 6 volt. It honks. Nice condition. Price is 110.00 INCLUDING shipping in the USA via FedEx Ground. I do not answer messages posted here. Call me at 734-730-4274 or email directly at motoringicons@hotmail.com Thanks

Last post

Still for sale

4 Replies

713 Views

Last post by GGZ
Thu Dec 04, 2025 12:21 pm
For Sale: 1 New 34x4 BF Goodrich Tire and 4 new flaps

Last post by GGZ « Thu Dec 04, 2025 12:20 pm
Posted in Classifieds - Parts
Replies: 1
by GGZ » Sat Nov 15, 2025 1:59 pm » in Classifieds - Parts

First post

I know these aren't for a Model T but are other early cars on this forum! I have ONE brand new 34x4 BF Silvertown Goodrich, black, straight side tire from Coker. I also have four new flaps. These are new, never mounted. Price is 400.00. I will also throw in two 34x4 Non-Skid tires that are really old and can only be used for display or rollers....

Last post

Still for sale

1 Replies

159 Views

Last post by GGZ
Thu Dec 04, 2025 12:20 pm
For Sale: Large Rubes 3/4 Brass Bulb Horn Assembly

Last post by GGZ « Thu Dec 04, 2025 12:19 pm
Posted in Classifieds - Parts
Replies: 4
by GGZ » Tue Sep 23, 2025 1:39 pm » in Classifieds - Parts

First post

This large Rubes 3/4 twist horn is about 10 tall and is about 6 wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40 long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is obviously squished....

Last post

Still for sale

4 Replies

545 Views

Last post by GGZ
Thu Dec 04, 2025 12:19 pm
FS 1909 Touring #6233

Last post by debrick1234# « Thu Dec 04, 2025 12:06 pm
Posted in Classifieds - Vehicles
Replies: 11
by sswam » Sun Oct 05, 2025 8:26 pm » in Classifieds - Vehicles

First post

My dad and I restored this 1909 Touring between 1970 and 1977. He purchased the original chassis and body in the 1960s but I don’t have an exact date. I was still in my teens when we completed the build so I don’t have specifics or a full list of parts that were needed to complete the car. I know he shipped the wheels to someone in CA who...

Last post

We are back from our family trip and we are hoping to visit Debbie's Mom in Eagan in the next month. We were hoping to come and see the T at the same time. Is there a time or day that works best for you between now and the New Years.

Thanks
Rick and Deb Teegarden

11 Replies

4404 Views

Last post by debrick1234#
Thu Dec 04, 2025 12:06 pm
READ THIS NOW BEFORE POSTING COMMENTS

Last post by TXGOAT2 « Thu Dec 04, 2025 10:59 am
Posted in Classifieds - Vehicles
Replies: 9
by AdminJeff » Tue Mar 18, 2025 1:08 am » in Classifieds - Vehicles

First post

This section of the forum is for folks who want to sell their vehicles, NOT for random comments from the peanut gallery that are unrelated to interest in pursuing purchasing the car. Do NOT post your car for sale in someone else's ad. It's not only rude, it's unprofessional.

Additionally, Keep your opinion comments out of this section . You know...

Last post

I agree with Mr. Loftfield.

9 Replies

6569 Views

Last post by TXGOAT2
Thu Dec 04, 2025 10:59 am
FS Stevens drive shaft tools

Last post by KimDobbins « Thu Dec 04, 2025 10:50 am
Posted in Classifieds - Parts
Replies: 4
by KimDobbins » Thu Dec 04, 2025 12:47 am » in Classifieds - Parts

First post

T121 sleeve driver, $100
T122 sleeve puller, $200
T244 bushing reamer, $125
T292 bushing refacer, $150
Exact copy of the Stevens tool box for all the drive shaft tools,$250.00 all plus shipping kdmks AT att.net.

Last post

All the tools and box are sold. Dan, I’ll get you a copy of the label.

4 Replies

307 Views

Last post by KimDobbins
Thu Dec 04, 2025 10:50 am
FS FRONT WHEEL BEARING SET (SOLD)

Last post by Mark Chaffin « Thu Dec 04, 2025 9:39 am
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Wed Dec 03, 2025 7:22 pm » in Classifieds - Parts

First post

Complete set of four used Timken front wheel bearings $50.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251203_160412.jpg

Last post

Going to Scott.

2 Replies

194 Views

Last post by Mark Chaffin
Thu Dec 04, 2025 9:39 am
looking for 1910 touring door pictures

Last post by Tim D « Thu Dec 04, 2025 9:19 am
Posted in General Discussion Forum
Replies: 3
by Tim D » Fri Nov 28, 2025 3:34 pm » in General Discussion Forum

First post

Looking for some good pictures of the doors on a 10 touring. So I can fit them nicely.

Last post

these helped . thank you.
Need a couple of the striker in the jamb.

3 Replies

334 Views

Last post by Tim D
Thu Dec 04, 2025 9:19 am
Roller tires

Last post by Ruxstel24 « Thu Dec 04, 2025 7:06 am
Posted in Classifieds - Parts

by Ruxstel24 » Thu Dec 04, 2025 7:06 am » in Classifieds - Parts

I have 4 30X3.5” tires with cracks. 2 Firestone H
And 2 Wards Riverside. The Wards tires are only a couple years old but were cracked all over. Corker and Snyder’s stepped up and replaced them (see pics) very grateful to them both !
I can get pics of the Firestones if needed, but they all have good tread, just cracked and not roadworthy. $20ea and...

0 Replies

154 Views

Last post by Ruxstel24
Thu Dec 04, 2025 7:06 am
Ignition coil points (new and used)

Last post by Ruxstel24 « Thu Dec 04, 2025 6:58 am
Posted in Classifieds - Parts
Replies: 1
by Ruxstel24 » Sun Nov 23, 2025 2:14 pm » in Classifieds - Parts

First post

I have a few dozen points, most are used but look serviceable. A few are new/NOS. Some are Ford script most are KW. Asking $160 OBO for the lot plus the ride.
Quickest way to contact me is by text or phone call at 33 zero 3 nine one nine zero 62
Thanks Dave

Last post

I’ll drop to $100 and include shipping to USA 48

1 Replies

274 Views

Last post by Ruxstel24
Thu Dec 04, 2025 6:58 am
FS 1912 - 1916 Accessory Brass Bell Arrooga Horn $175.00

Last post by Tparts « Thu Dec 04, 2025 6:10 am
Posted in Classifieds - Parts
Replies: 3
by Tparts » Thu Nov 06, 2025 12:49 pm » in Classifieds - Parts

First post

Interesting design accessory Horn that has a “push lever” to make a loud signal. Brass bell and black painted housing with bracket that mounts on the Fake door of a touring or roadster body. $175.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

3 Replies

623 Views

Last post by Tparts
Thu Dec 04, 2025 6:10 am
FS RARE Kingston “6 Ball” Carburetor, $1850.00

Last post by Tparts « Thu Dec 04, 2025 6:07 am
Posted in Classifieds - Parts
Replies: 5
by Tparts » Mon Oct 27, 2025 10:31 pm » in Classifieds - Parts

First post

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $1850.00 plus shipping.
Lang’s 1-800-872-7871

Last post

Price drop

5 Replies

967 Views

Last post by Tparts
Thu Dec 04, 2025 6:07 am
FS Very Rare 1910 Holley 4150 Carburetor $1500.00

Last post by Tparts « Thu Dec 04, 2025 6:05 am
Posted in Classifieds - Parts
Replies: 1
by Tparts » Mon Dec 01, 2025 8:59 pm » in Classifieds - Parts

First post

Extremely Rare 1910 Holley 4150 “Pot Metal” Carburetor. Most likely rebuilt by Russ Potter. Please notice that both the pot metal bowl and base have been repaired as seen in the photos. There is no guarantee as far as useablity as these carburetors are fragile. $1500 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

1 Replies

276 Views

Last post by Tparts
Thu Dec 04, 2025 6:05 am
26/27 Turtle Deck Lid for Runabout

Last post by aifistell « Thu Dec 04, 2025 4:15 am
Posted in Classifieds - Parts

by aifistell » Thu Dec 04, 2025 4:15 am » in Classifieds - Parts

I am looking for a good Turtle Deck Lid for a 26/27 Runabout. If anyone has one please let me know. I am in Denver Colorado. You can call me at 720-322-4496.
Thanks,
Allen Fistell

0 Replies

111 Views

Last post by aifistell
Thu Dec 04, 2025 4:15 am
vaporizer

Last post by Melba Nolan « Thu Dec 04, 2025 2:25 am
Posted in Classifieds - Parts

by Melba Nolan » Thu Dec 04, 2025 2:25 am » in Classifieds - Parts

For sale: vaporizer $50 plus postage

20220920_190200.jpg

0 Replies

117 Views

Last post by Melba Nolan
Thu Dec 04, 2025 2:25 am
brass carb

Last post by Melba Nolan « Thu Dec 04, 2025 2:15 am
Posted in Classifieds - Parts

by Melba Nolan » Thu Dec 04, 2025 2:15 am » in Classifieds - Parts

For sale: Brass Kingston L 1916 carb $350 plus postage
20220806_105131.jpg 20220806_105259.jpg

0 Replies

137 Views

Last post by Melba Nolan
Thu Dec 04, 2025 2:15 am
1905-06 Ford model F runabout body REDUCED PRICE.

Last post by Robert Kiefaber « Thu Dec 04, 2025 12:39 am
Posted in Early Ford Forum - pre-T
Replies: 1
by Robert Kiefaber » Thu Jul 24, 2025 6:12 pm » in Early Ford Forum - pre-T

First post

1905-06 Ford model F runabout body. Never used. Very nice craftsmanship. Wood body with grey primer. $2800. Text or leave message at too six ooh five 7 one three six 5 seven. Pickup only.
IMG_2267.jpeg

Last post

To the top.

1 Replies

1009 Views

Last post by Robert Kiefaber
Thu Dec 04, 2025 12:39 am
Speedster Rally XXII, June 17-20

Last post by DHort « Wed Dec 03, 2025 11:44 pm
Posted in General Discussion Forum

by DHort » Wed Dec 03, 2025 11:44 pm » in General Discussion Forum

In El Paso, IL.

Mark your calendar.

Registration forms are out.

Tin----Lizzy----one one seven at yahoo dot com (ignore the dashes)

0 Replies

138 Views

Last post by DHort
Wed Dec 03, 2025 11:44 pm
Chapman wheel lock question

Last post by ModelTWoods « Wed Dec 03, 2025 10:15 pm
Posted in General Discussion Forum
Replies: 3
by Tbird » Tue Dec 02, 2025 12:09 pm » in General Discussion Forum

First post

Does anyone know if the Chapman wheel locks were keyed the same? The model I’m asking about is B1. We’re all B1’s keyed the same?

Last post

I have several Chapman wheel locks and they all have Corbin keys and cylinders.

3 Replies

240 Views

Last post by ModelTWoods
Wed Dec 03, 2025 10:15 pm
2 sets of Top Rings for pistons FS

Last post by Tbird « Wed Dec 03, 2025 10:11 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 10:11 pm » in Classifieds - Parts

These are only top rings. 16 total. I have no other information about these other than what is listed on the packaging.
These were in a Federal Mogal packaging
Labeled .043-4.065
Top Rings from R10393t65 or R10393x65 ?

These came from Sam Ciprianos estate
25$ plus shipping

IMG_4227.jpeg IMG_4226.jpeg IMG_4228.jpeg

0 Replies

114 Views

Last post by Tbird
Wed Dec 03, 2025 10:11 pm
Brass horn bulb bracket -SOLD

Last post by Tbird « Wed Dec 03, 2025 10:00 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 10:00 pm » in Classifieds - Parts

$15 plus shipping.

IMG_4224.jpeg IMG_4225.jpeg

0 Replies

143 Views

Last post by Tbird
Wed Dec 03, 2025 10:00 pm
1927 Howe TT Fire Truck SOLD.

Last post by Bob in Texas « Wed Dec 03, 2025 9:48 pm
Posted in Classifieds - Vehicles
Replies: 7
by Bob in Texas » Mon Dec 01, 2025 8:41 pm » in Classifieds - Vehicles

First post

Howe left side.jpg Howe left2.jpg 1927 Howe Fire Truck. TT Chassis. Runs, Drives, Stops as should. 3 cylinder positive displacement pump. No idea id pump works but externally everything operates as should. Discharge and suction valves need rebuilt. New front tires. New Kevlar transmission bands. Spot light and siren work. Hose reel in picture...

Last post

Truck sold

7 Replies

519 Views

Last post by Bob in Texas
Wed Dec 03, 2025 9:48 pm
Misc bolts, screws, hardware FS

Last post by Tbird « Wed Dec 03, 2025 9:42 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 9:42 pm » in Classifieds - Parts

Hodgepodge of hardware. Drilled bolts, machine screws, studs, nuts etc. $10 for all plus shipping.

IMG_4221.jpeg

0 Replies

174 Views

Last post by Tbird
Wed Dec 03, 2025 9:42 pm
Copper Head Gasket -SOLD

Last post by Tbird « Wed Dec 03, 2025 9:37 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 9:37 pm » in Classifieds - Parts

New in packaging $40 plus shipping
IMG_4220.jpeg

0 Replies

203 Views

Last post by Tbird
Wed Dec 03, 2025 9:37 pm
Premium Head Gasket- SOLD

Last post by Tbird « Wed Dec 03, 2025 9:36 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 9:36 pm » in Classifieds - Parts

New in packaging- $25 plus shipping

IMG_4218.jpeg IMG_4219.jpeg

0 Replies

174 Views

Last post by Tbird
Wed Dec 03, 2025 9:36 pm
FS INTERESTING FRONT MOTOR MOUNT (SOLD)

Last post by Mark Chaffin « Wed Dec 03, 2025 9:11 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Wed Dec 03, 2025 7:20 pm » in Classifieds - Parts

First post

Interesting late style front motor mount with accessory mount added. Price is $50.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251203_160100.jpg

20251203_160123.jpg

Last post

Going to Shannon.

1 Replies

258 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 9:11 pm
Offenhauser adjustable fuel regulator FS

Last post by Tbird « Wed Dec 03, 2025 9:09 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 9:09 pm » in Classifieds - Parts

New in box. $15 plus shipping

IMG_4215.jpeg IMG_4216.jpeg IMG_4217.jpeg

0 Replies

173 Views

Last post by Tbird
Wed Dec 03, 2025 9:09 pm
Release Bearing 488 Chevrolet-FS

Last post by Tbird « Wed Dec 03, 2025 9:03 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 9:03 pm » in Classifieds - Parts

New in box $10 plus shipping

IMG_4213.jpeg IMG_4214.jpeg

0 Replies

96 Views

Last post by Tbird
Wed Dec 03, 2025 9:03 pm
SCAT Teflon pin button set FS

Last post by Tbird « Wed Dec 03, 2025 9:01 pm
Posted in Classifieds - Parts

by Tbird » Wed Dec 03, 2025 9:01 pm » in Classifieds - Parts

New in packaging. $20 plus shipping

IMG_4211.jpeg IMG_4212.jpeg

0 Replies

135 Views

Last post by Tbird
Wed Dec 03, 2025 9:01 pm
FS 1913 - 1914 Reproduction Hood SOLD

Last post by AZVT « Wed Dec 03, 2025 8:54 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Sun Nov 02, 2025 2:24 pm » in Classifieds - Parts

First post

1913-1914 Reproduction Aluminum Hood SOLD plus shipping. New they are $425.00
Lang’s 1-800-872-7871

Last post

WHAT DO YOU THINK SHIPPING CHARGES WOULD BE TO AZ?

2 Replies

426 Views

Last post by AZVT
Wed Dec 03, 2025 8:54 pm
FS SPARE TIRE BRACKET

Last post by Mark Chaffin « Wed Dec 03, 2025 7:25 pm
Posted in Classifieds - Parts

by Mark Chaffin » Wed Dec 03, 2025 7:25 pm » in Classifieds - Parts

For the improved Ford. Price is $40.00 plus $18.50 shipping. Mark Chaffin (951)805-0928

20251203_161333.jpg

0 Replies

177 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 7:25 pm
Brass Steering Gear Quadrants, lot of 2, used.

Last post by Pep C Strebeck « Wed Dec 03, 2025 7:18 pm
Posted in Classifieds - Parts
Replies: 1
by Pep C Strebeck » Wed Dec 03, 2025 7:16 pm » in Classifieds - Parts

First post

Lot of 2 Brass Steering Gear Quadrants, used, not great(?). The first one is marked as being Dodge Brothers, no cracks or breaks but the teeth for the throttle lever have been worn flat in one section (please see photos). The second is not marked with any manufacturer and is rough. The spark lever side is cracked/broken (please see photos) and...

Last post

More photos.

IMG_7282.JPG
IMG_7283.JPG
IMG_7284.JPG
IMG_7285.JPG

1 Replies

113 Views

Last post by Pep C Strebeck
Wed Dec 03, 2025 7:18 pm
Exhaust Pack Nut, set of 2, new.

Last post by Pep C Strebeck « Wed Dec 03, 2025 7:16 pm
Posted in Classifieds - Parts

by Pep C Strebeck » Wed Dec 03, 2025 7:16 pm » in Classifieds - Parts

Set of 2 new, reproduction Exhaust Pack Nuts, price is $45 for the set, shipping included (in the U.S.). Payment methods are by check, money order or Postal Money Order, please contact me through a PM or e-mail through the Forum. If you have any question please do not hesitate to ask.

IMG_7266.JPG
IMG_7265.JPG

0 Replies

113 Views

Last post by Pep C Strebeck
Wed Dec 03, 2025 7:16 pm
W.T.B. FIREWALL TO FRAME BRACKET FOR 1915

Last post by NoelChico « Wed Dec 03, 2025 7:04 pm
Posted in Classifieds - Parts
Replies: 3
by adenautomotive » Wed Dec 03, 2025 11:05 am » in Classifieds - Parts

First post

I need a pair of firewall to frame brackets to fit 1915 t

Last post

My new to me '16 has a cast bracket with 2 bolts going through the top of the frame rail, and 3 bolts going through the firewall.

3 Replies

171 Views

Last post by NoelChico
Wed Dec 03, 2025 7:04 pm
FS MODIFIED INNER CLUTCH DRUM

Last post by Mark Chaffin « Wed Dec 03, 2025 6:58 pm
Posted in Classifieds - Parts

by Mark Chaffin » Wed Dec 03, 2025 6:58 pm » in Classifieds - Parts

Modified inner clutch drum with eight notches instead of six like the stock T. Likely for use with the Turbo 400 or Watt's clutch pack design. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251203_153723.jpg

20251203_153735.jpg

0 Replies

146 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 6:58 pm
FS Stromburg OF and RF carbs for sale

Last post by KimDobbins « Wed Dec 03, 2025 6:57 pm
Posted in Classifieds - Parts
Replies: 6
by KimDobbins » Mon Dec 01, 2025 7:12 pm » in Classifieds - Parts

First post

I have 3 OF carbs and one aluminum RF for sale. One nice complete OF, $300. 2 incomplete OF's $150 each. One complete aluminum RF $250. all plus shipping kdmks AT att.net.

Last post

The OF carbs are sold.

6 Replies

419 Views

Last post by KimDobbins
Wed Dec 03, 2025 6:57 pm
Tool Time

Last post by JohnM « Wed Dec 03, 2025 6:53 pm
Posted in OT - Off topic
Replies: 145
by Bryant » Mon Aug 29, 2022 6:35 pm » in OT - Off topic
1

2
First post

Picked up this gem this weekend. Appears well built. Anyone play with one like it? 6B5DE632-49E4-490B-98CC-85AD0EAB075A.jpeg I figured it would be useful with the T project amongst other things. If you have a cool Tool post it. Might be fun to see
Bryant

Last post

You can hold with one hand what you want to tape, and dispense the tape with the other hand without dragging the dispenser across the table. ;)
145 Replies

976181 Views

Last post by JohnM
Wed Dec 03, 2025 6:53 pm
FS EARLY DS SPOOLS (SOLD)

Last post by Mark Chaffin « Wed Dec 03, 2025 5:58 pm
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Fri Nov 28, 2025 2:08 pm » in Classifieds - Parts

First post

All four for $40.00 plus $18.50 domestic shipping. You clean them up. Mark Chaffin (951)805-0928

20251128_110511.jpg

Last post

Going to Roger. Email sent.

2 Replies

326 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 5:58 pm
FS STARTER PARTS NEW (SOLD)

Last post by Mark Chaffin « Wed Dec 03, 2025 5:55 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Tue Dec 02, 2025 7:31 pm » in Classifieds - Parts

First post

An assortment of new and NOS starter parts offered as one lot. Retail value is $100+! Get this entire lot for $45.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251202_134511.jpg

Last post

Going to Dean.

1 Replies

190 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 5:55 pm
FS GENERATOR PARTS LOT NEW (SOLD)

Last post by Mark Chaffin « Wed Dec 03, 2025 5:54 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Tue Dec 02, 2025 7:34 pm » in Classifieds - Parts

First post

Generator parts lot new. Retail value is $50+. Get this lot for $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251202_134705.jpg

Last post

Going to Dean.

1 Replies

158 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 5:54 pm
FS GAS LINE CLAMP SETS NEW (SOLD)

Last post by Mark Chaffin « Wed Dec 03, 2025 5:53 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Tue Dec 02, 2025 7:40 pm » in Classifieds - Parts

First post

Seven new gas line clamp sets sold as one lot. Price is $10.00 for the lot plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251202_134959.jpg

Last post

Going to Dean.

1 Replies

237 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 5:53 pm
Bronze timing gear SOLD

Last post by DustySpokes « Wed Dec 03, 2025 5:32 pm
Posted in Classifieds - Parts
Replies: 3
by big2bird » Tue Dec 02, 2025 3:19 pm » in Classifieds - Parts

First post

20251202_121326.jpg

Brand new bronze gear by Dan Mc Eachern.
Still sealed in bag. I just do not need it now.

$200 new. $150 shipped to lower 48.

Check or PayPal is fine. Email or PM via forum.

Last post

Worth every dime.

3 Replies

303 Views

Last post by DustySpokes
Wed Dec 03, 2025 5:32 pm
WestChester Ohio

Last post by Joe Bell « Wed Dec 03, 2025 5:24 pm
Posted in General Discussion Forum

by Joe Bell » Wed Dec 03, 2025 5:24 pm » in General Discussion Forum

Looking for someone to help get a T running north of Cinci Ohio, The truck was the original truck of the 105 year old company, a grand daughter would love to see it out and about again. It is a little far for me right now but I know it has been kept in dry storage all these years. Thanks Joe Bell 419-618-1025

0 Replies

204 Views

Last post by Joe Bell
Wed Dec 03, 2025 5:24 pm
WANTED Hempy cooper line boring info and parts

Last post by Karl Von Neumann « Wed Dec 03, 2025 4:33 pm
Posted in Classifieds - Parts
Replies: 7
by Karl Von Neumann » Tue Nov 26, 2024 7:21 pm » in Classifieds - Parts

First post

I have a Hempy Cooper line boring jig I don't have anything else that what is pictured. I would be open to any info parts avaliable to get this into use. I would also be interested in maybe trading this plus cash for a setup that will do model A as well. Not for outright sale at this time

Last post

Move to top

7 Replies

1728 Views

Last post by Karl Von Neumann
Wed Dec 03, 2025 4:33 pm
FS storage stands

Last post by Karl Von Neumann « Wed Dec 03, 2025 4:33 pm
Posted in Classifieds - Parts
Replies: 8
by Karl Von Neumann » Wed Aug 20, 2025 1:29 pm » in Classifieds - Parts

First post

Nice set of 4 storage stands one is mismatched all work fine all will need new pads 200$ shipped lower 48

Last post

Move to top

8 Replies

2294 Views

Last post by Karl Von Neumann
Wed Dec 03, 2025 4:33 pm
FS new prestolite mounts

Last post by Karl Von Neumann « Wed Dec 03, 2025 4:33 pm
Posted in Classifieds - Parts
Replies: 3
by Karl Von Neumann » Sat Nov 08, 2025 1:26 pm » in Classifieds - Parts

First post

I bought these unfinished from a gent. I'm not going to use them just wanting my money of them 100$ plus s&h they are stainless need finishing what you see is what I have

Last post

Move to top

3 Replies

490 Views

Last post by Karl Von Neumann
Wed Dec 03, 2025 4:33 pm
Jno brown model 16 headlights

Last post by Karl Von Neumann « Wed Dec 03, 2025 4:32 pm
Posted in Classifieds - Parts
Replies: 5
by Karl Von Neumann » Thu Nov 13, 2025 10:47 am » in Classifieds - Parts

First post

Pair of Proper jno brown model 16 headlights for 1913 and 1914 cars. Both light need work but are very restorable burner bases are there no burners tho no reflectors or glass. $400 plus the ride

Last post

Move to top

5 Replies

568 Views

Last post by Karl Von Neumann
Wed Dec 03, 2025 4:32 pm
Brass mirror WTB

Last post by Eric Edwards « Wed Dec 03, 2025 3:33 pm
Posted in Classifieds - Parts
Replies: 1
by Tbird » Thu Nov 27, 2025 7:35 pm » in Classifieds - Parts

First post

Looking for one of these mirrors.
Thanks.

IMG_3979.jpeg

Last post

I have nirrord. Edwards. 705 828 5405

1 Replies

185 Views

Last post by Eric Edwards
Wed Dec 03, 2025 3:33 pm
FS New Double Twist brass horn. Lhd

Last post by Eric Edwards « Wed Dec 03, 2025 3:30 pm
Posted in Classifieds - Parts
Replies: 2
by Eric Edwards » Mon Nov 24, 2025 1:21 pm » in Classifieds - Parts

First post

Last of the final batch i had produced 15 years ago. No
More after this one’s gone. $375 USd Eric Edwards 705 828 5405

Last post

Bulbs and tubing are available from the T dealers. Horn is the last.
Eric Edwards. 705 8285405.

2 Replies

267 Views

Last post by Eric Edwards
Wed Dec 03, 2025 3:30 pm
WANTED dash and window handles for 26 Fordor

Last post by TRDxB2 « Wed Dec 03, 2025 3:19 pm
Posted in Classifieds - Parts
Replies: 3
by tom_strickling » Tue Dec 02, 2025 5:44 pm » in Classifieds - Parts

First post

I am looking for a dash for a 26 Fordor ALSO 1,2, or 3 inside window crank handles

Last post

This is what I have..... PM or eMail me via the Forum if interested
The rust colored one only has separation on the top strip but otherwise sound.

3 Replies

162 Views

Last post by TRDxB2
Wed Dec 03, 2025 3:19 pm
FS Original Ford Model T Keys

Last post by YellowTRacer « Wed Dec 03, 2025 2:53 pm
Posted in Classifieds - Parts

by YellowTRacer » Wed Dec 03, 2025 2:53 pm » in Classifieds - Parts

FS price drop. I have original Ford Model T key numbers 55, 58, 61, 63, 66, 67, 69, and 70. A couple are nickel plated the rest are brass. All are Ford script except numbers 55 and one of the 61s (I have a couple of 61s) Price is $15.00 each.

Ed aka #4

0 Replies

148 Views

Last post by YellowTRacer
Wed Dec 03, 2025 2:53 pm
FS Original Ford Model T Keys

Last post by YellowTRacer « Wed Dec 03, 2025 2:50 pm
Posted in Classifieds - Parts

by YellowTRacer » Wed Dec 03, 2025 2:50 pm » in Classifieds - Parts

FS I have original Ford Model T key numbers 55, 58, 61, 63, 66, 67, 69, and 70. A couple are nickel plated the rest are brass. All are Ford script except numbers 55 and one of the 61s (I have a couple of 61s) Price is $25.00 each.

Ed aka #4

0 Replies

91 Views

Last post by YellowTRacer
Wed Dec 03, 2025 2:50 pm
Question on a spring spreader

Last post by Jerry VanOoteghem « Wed Dec 03, 2025 1:59 pm
Posted in General Discussion Forum
Replies: 16
by LittleTimmy52 » Mon Dec 01, 2025 12:43 pm » in General Discussion Forum

First post

I need to do some more shenanigans on my rear suspension again. This time though I don't have access to the tools and shop i was able to borrow and hence can't replicate the janky definitely not OSHA approved method for spreading the springs. Would this model a spreader from Snyder's work on my 17 t? It's up there in my price range but I am no...

Last post

... if the bolt is centered and square to the hole... but won't go in, would vibration of driving finish it getting it in place, or do I really have to take it apart again?

I guess it depends how close it is to fitting in place. However, if your clamps are tight, and the bolt head has not yet entered the hole in the frame, when it does, (by...

16 Replies

517 Views

Last post by Jerry VanOoteghem
Wed Dec 03, 2025 1:59 pm
WTB - 1926/27 Steering Column

Last post by Ruxstel24 « Wed Dec 03, 2025 1:23 pm
Posted in Classifieds - Parts
Replies: 1
by cijames5380 » Wed Dec 03, 2025 11:05 am » in Classifieds - Parts

First post

Hi, I'm looking for a very nice/good 1926/27 Steering Column. I'm in Chicago and can pay for shipping if there's a good one out there. Thank you!

Last post

Hi Colin,
I have a pretty nice one with the arm and lower mount. I can’t imagine what shipping would cost.
Best way to get me is call or text 33zero 3nine one 9zero 62 Dave

1 Replies

139 Views

Last post by Ruxstel24
Wed Dec 03, 2025 1:23 pm
FS Distributors

Last post by TXGOAT2 « Wed Dec 03, 2025 12:31 pm
Posted in Classifieds - Parts
Replies: 7
by SMHnat » Tue Dec 02, 2025 4:57 pm » in Classifieds - Parts

First post

I came across a number of Texas T distributors and bought them.
I'm offering some for sale, BUT I can only sell if I install them on your car.
SO
WINTER PROMOTION!!
Buy a Texas T distributor for previous catalogue price $349.62
Plug wires and all wire connections - soldered - 7mm solid copper core plug wire $1.73/ft
Everything is at cost...

Last post

I like the Founder's idea of funding the LIMITED functions of the federal government with import duty revenue.

7 Replies

488 Views

Last post by TXGOAT2
Wed Dec 03, 2025 12:31 pm
DISTRIBUTORS

Last post by DHort « Wed Dec 03, 2025 12:03 pm
Posted in General Discussion Forum
Replies: 1
by SMHnat » Tue Dec 02, 2025 5:01 pm » in General Discussion Forum

First post

I came across a number of Texas T Distributors.

If you have interest in buying one.
Go to Parts forum or use this link:

fa9a1b02-7ff4-4f33-a78e-efeda0e6270a.jpg

Last post

Just move this post to the classified section.

1 Replies

310 Views

Last post by DHort
Wed Dec 03, 2025 12:03 pm
FS RUNNING BOARD WOOD SET (SOLD)

Last post by Mark Chaffin « Wed Dec 03, 2025 10:15 am
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Tue Dec 02, 2025 7:37 pm » in Classifieds - Parts

First post

Running board wood set (090-16) T-4822-S. Retail price is 36.00. Get this set for $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251202_134816.jpg

Last post

Going to Bill.

2 Replies

235 Views

Last post by Mark Chaffin
Wed Dec 03, 2025 10:15 am
WTB buckle for SR mother in law seat

Last post by JvanMaanen « Wed Dec 03, 2025 9:27 am
Posted in Early Ford Forum - pre-T

by JvanMaanen » Wed Dec 03, 2025 9:27 am » in Early Ford Forum - pre-T

Need 1 buckle for an SR mother in law seat. Have straps etc just missing one of the buckles that mount on the back of the body

Jim IMG_0548.JPG

0 Replies

57 Views

Last post by JvanMaanen
Wed Dec 03, 2025 9:27 am
FS Misc Lots…., New Prices!

Last post by Henry K. Lee « Wed Dec 03, 2025 6:36 am
Posted in Classifieds - Parts
Replies: 14
by Henry K. Lee » Sun Nov 30, 2025 11:08 am » in Classifieds - Parts

First post

Lot #1..., As seen in the picture, $40.00 with shipping. SOLD TO PERRY!

IMG_5948.jpeg

Lot #2...., As seen in the picture, chrome column mount included! $50.00 with shipping.

IMG_5971.jpeg

Lot #3...., As seen in the picture, $100.00 with shipping.

IMG_5970.jpeg

Lot #4...., As seen in the picture, NOS Mallory 4 cylinder distributors,...

Last post

Hump Day Special...., new prices!

14 Replies

1112 Views

Last post by Henry K. Lee
Wed Dec 03, 2025 6:36 am
Help ID a tail light/lamp bracket.

Last post by TRDxB2 « Wed Dec 03, 2025 1:02 am
Posted in General Discussion Forum
Replies: 3
by Pep C Strebeck » Tue Dec 02, 2025 10:15 pm » in General Discussion Forum

First post

I believe this to be a 1914 tail lamp bracket (reproduction, cast bronze, not brass) and if anyone could offer confirmation or correction, any help would be appreciated.

IMG_7261.JPG
IMG_7262.JPG
IMG_7263.JPG

Last post

Good eyes Russ, Allan

3 Replies

176 Views

Last post by TRDxB2
Wed Dec 03, 2025 1:02 am
W T B 1911-14 Hood Former

Last post by Burlingtontguy « Tue Dec 02, 2025 11:32 pm
Posted in Classifieds - Parts
Replies: 3
by Burlingtontguy » Fri Oct 10, 2025 9:49 pm » in Classifieds - Parts

First post

I am looking for a Hood Former to complete my 1913 Wooden Cab Pick-Up truck. Please send pictures and price in E-Mail, and Contact phone # , Thanks , Dennis

Last post

to the top

3 Replies

468 Views

Last post by Burlingtontguy
Tue Dec 02, 2025 11:32 pm
(Pending) Stevens Valve Lifter

Last post by Shannon_in_Texas « Tue Dec 02, 2025 11:15 pm
Posted in Classifieds - Parts
Replies: 1
by WaltM » Tue Dec 02, 2025 4:31 pm » in Classifieds - Parts

First post

(Pending) Stevens Valve Lifter. Price $70 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

Walt, I sent you an email. Thanks!

1 Replies

280 Views

Last post by Shannon_in_Texas
Tue Dec 02, 2025 11:15 pm
4 dip crankcase pan cover

Last post by Melba Nolan « Tue Dec 02, 2025 10:20 pm
Posted in Classifieds - Parts

by Melba Nolan » Tue Dec 02, 2025 10:20 pm » in Classifieds - Parts

For sale: 4 dip crankcase pan lower cover $50 plus postage
20241119_132330.jpg

0 Replies

118 Views

Last post by Melba Nolan
Tue Dec 02, 2025 10:20 pm
For sale- Bermuda bell

Last post by Nate22huckster « Tue Dec 02, 2025 10:12 pm
Posted in Classifieds - Parts
Replies: 2
by Nate22huckster » Tue Nov 18, 2025 9:08 pm » in Classifieds - Parts

First post

For sale- Nickel plated Bermuda bell, rings nice and loud. The nickel plating has some imperfections. The top plate and button are not original but look nice. $150 + shipping

F03D0384-2966-42DA-B686-082432646496.jpeg

1E49D5D1-ACE0-4F0A-90BB-5BE49D1CF463.jpeg

Last post

Price now $150. This would make a perfect Christmas gift!

2 Replies

543 Views

Last post by Nate22huckster
Tue Dec 02, 2025 10:12 pm
FS. Brass hub cover set

Last post by Eric Edwards « Tue Dec 02, 2025 10:12 pm
Posted in Classifieds - Parts

by Eric Edwards » Tue Dec 02, 2025 10:12 pm » in Classifieds - Parts

Set of 2 deep brass turned hub covers and set of 2 shallow covers for the rears Custom turned In the 70s For that splashy brassy Speedster $275 post included.
Last of the new double twist horns. $375
705 828 5405
Eric Edwards

0 Replies

136 Views

Last post by Eric Edwards
Tue Dec 02, 2025 10:12 pm

Search found 212 matches

Go to advanced search