MTFCA Forum

Thes are original Model T Ford side lamp brackets.Singles except for # 6. The use is based upon what I beleive. You are the judge of the use of them. All are steel originals. The price includes shipping to lower 48.

#1 1923-25 $40
#2 1915-17 couplet, scarce $110
#3 1909-10 tail light (perhaps to 1912) $60
#4 1915-17 center door $45
#5 various...

I have 3 - nice 26-7 coilboxes with covers, $115 plus shipping, 26-7 engine blocks $350 plus shipping, 26-7 rear axle housings
$100 plus shipping, 2-3 High radiators $150 each plus shipping. 26-7 frames excellant condition $350 each. All items can be picked up in Ct 06013. Email needs with contact# I will call you back to discuss all items and...

I have a great start on a 1914 WW1 Ambulance Body and Chassis, 85 % finished but all materials are there to finish this neat
piece of U S History. Located in Ct 06013 25 miles from Hartford. I can Deliver within a 100 mile radius for fuel. Asking $4,500 Email for pictures and send Contact# to discuss the project. You will not be disappointed with...

Torpedo front view.png

IMG_8587.jpeg I just got the head back the machine shop this week. The head got 8 new valves, 2 new valve guides and 6 bronze inserts. There is a serial number on the front of the head and it is 1077 X. There is freeze plug on the top of the head that has some number but are pretty hard to read
Fitz

3 slightly different headlight door spinnings for 1913-14 head lights, $20 each. 7 brass rims for 1915 headlights, $20 each. Plus shipping. kdmks AT att.net.

After repairing the horn switch & reworking the horn on a '23, I've come to find the horn needs a bit of work. What exactly does the adjusting screw do?

4 bezels, 2 back and 2 doors for John Brown model 15 and 19. $125 for all. 1 door and 2 backs for E and J 466 headlights $40 for all plus shipping. kdmks AT att.net.

Wanted: original 1914 Ford coil box lid

I purchased a new repro lid for my 1914 T awhile back. When I installed the coils, the lid would not close all the way. Now I have to drive with the coil box lid off. I am using original metal top coils. I set the metal top coils along side of a later ford coil and the metal top coil is much taller then the...

Set of flywheels magnets. They have some very light surface rust. Good for cores. Will need to be remagnetized. Never hurts to have a spare set on hand.

$25 plus shipping in the U.S.

IMG_9348.jpeg

IMG_9347.jpeg

Brass Ford script. Measures about 7.5”x3.5”. Could use a good polishing.

$20 plus shipping in the U.S.

IMG_9350.jpeg

I have 6” and 1 7” glass headlight reflectors for sale. $100 each. Plus shipping. kdmks AT att.net.

Heavy Case Muncie - Gears look very, very good with exception of underdrive gear on lower shaft, which has 4-5 teeth in a row damaged. Photo of damage included. Everything spins nice. Under-Direct-Over-Reverse. Roughly 2:1 U, 1:1 D, and 0.73:1 O. Were used in Ts and TTs. I don't have the couplers. Pick up south of Kansas City or can deliver to...

The weather was perfect for a drive with some speedster friends. IMG_5813.jpeg

We need a complete coil box lid with unbroken side clamps for a 1926-27 engine-mounted coil box. An original one is preferred over a repo. Thanks!
Marshall (563) 322-1319

Hello all !! Are the ring and pinion gears the same between the small drum and the large drum
Thanks

To continue along with this series, here is the 2nd major series, the T-725-B.1 (first B version). This one has the 6 holes around perimeter, and the first to use the set-screw. The front thrust face is designed to be used in conjunction with T-769 (top hat) bronze bushing. The set-screw to thrust face is the noted .530 - .533 . Nothing on parts...

'Looking for a good pair of front top bow clamps with thumbscrews for a 1926-27 Touring. I don't know if earlier clamps will work, but I suspect they will. Thanks!
Marshall (563) 322-1319

Hello everyone,

As some of you have already heard, I committed to obtaining several key Model T parts drawings from Benson Ford Archives. The purpose is for my ongoing 3D and schematic drawings to use a an educational tool for both here on the forum and for collectors.

A lot of the problem in rebuilding the transmission seems to be...

Check this out. Seems like they're made for reaming out triple gear bushings. But just doesn't make sense. Anyone know what they're designed for? Found 'em on eBay, pretty cheap. I already had the Wilson reamer, which I tested, and iit fits inside the fixture bores.
20260307_175852.jpg

Interesting early Union Forge counter weighted crank on eBay. You can tell because of the “patent applied for” and the forge stamp of a “U” in a circle

IMG_7675.jpeg

I don't know how many times I have seen a what it's worth post but I'm in need of a answer. I have a For sale Vehicles ad for my 1925 Model T
Fire truck & have had 0 interest in it as of yet. I'm wanting to know what is the issue with it & what someone would be willing to pay for it?
Is there no interest in it, is it too high priced or are T's...

Hello forum. I’m on the lookout for an electric horn for my TT. Preferably a Klaxxon or such. Show me what you got.

Thanks in advance, Jacob Mangold

Converted File.jpg
This was made from picture of the wrench, creating a cad file and sent to a 3D printer shop and printed out of stainless steel for ~$120 . All I know for certain is the hub cap end of the wrench fits and I have pressed pins into the spanner pin holes. I haven't a clue what the rest of the wrench is supposed to fit thus I...

I have a 22 touring and I put it away last fall. We pulled it out and it would not start. To cut to the chase; cleaned carb twice, charged battery several times, sprayed a little starting fluid, put oil in the cylinders, and finally restored to pull starting. It fired up immediately and ran beautifully. Put several miles on it, filled fuel tank...

IMG_5243.jpeg IMG_4866.jpeg IMG_5147.png IMG_5140.jpeg

For sale: bottom of carb $25 plus postage

20220730_140333.jpg

I need to clean up some threads on a 1910 sediment bulb. What is the thread size for the hole where the fuel shut off valve screws into? I know the shut off valves had two different size threads on each side that almost look identical. Thanks!
Mike

I have a TT chassis with a Ruckstell rear end that needs a new home. I cant take pictures as it is surrounded by too much stuff. The wheels roll but are no good. No sheet metal, body, running boards, engine, lights, steering column or firewall. I would consider delivering to Luray in May if you make a nonrefundable deposit. $1000

Thought this would be of interest. Says it can be construction from the diagram. Safe to assume assume that the 1 x 2 lumber is exactly 1 x2 back in the day

Early style front engine mount used from 1909 to about 1921. Nice condition, u bolts are in great shape with excellent threads. Can be hard to find these u bolts that have good threads.

$50 plus shipping in the U.S.

IMG_9268.jpeg

IMG_9269.jpeg

IMG_9270.jpeg

Wire wheel rear hub. Has some pitting, but the taper and keyway looks to be ok.

$50 plus shipping in the U.S.

IMG_9264.jpeg

IMG_9265.jpeg

IMG_9266.jpeg

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

One more item, a period Water Pump looks to be serviceable $50 plus shipping, again contact via text or call, 3threezer02fourone2six4one. Thanks Wingnut

i set the body on the frame the other night and used 1/2 inch bolts to secure to the 6 frame mounts and everything seemed to line up but I see the front fourdoors seem to be above the firewall so I'm guessing the firewall was not raised up to where it should be. My question is am i overlooking something as when i picked up the car the firewall was...

One hundred years ago in March of 1926, My Model T coupe rolled off the assembly line. When it was 44 years old in 1970, 56 years ago I bought it for $600.00 and began restoring it when I was 16 completing it 2 years later when I was 18. I am now 72. Jim Patrick

IMG_6603.jpeg IMG_6602.jpeg IMG_1257.jpeg IMG_6606.jpeg

I’ve seen many strange and interesting accessories, but this takes the cake for the silliest. I wonder if one survived?

“Lemuel Bosco of Akron, Ohio, spent $5 for an antitheft device that was supposed to lock the Splitdorf ignition switch of his car, but it didn't stop a thief. He broke it off and took Bosco's Mercer for a joyride. The cops found...

For sale: Brass Kingston L 1916 carb $350 plus postage
20220806_105131.jpg 20220806_105259.jpg

For sale: steering wheel spider $25 plus postage
16 inch 1920-1925
20230222_094214.jpg

20240618_170139.jpg

For sale: hub puller in good condition $50 plus postage
20260107_163458 - Copy.jpg

Transmission driven gear puller. Broke on pulling off a very stubborn repro driven gear. Worked like a champ before. Cost is zero. You pay Priority postage. Email me via the website.
Richard Gould
20260307_104327.jpg
20260307_104201.jpg

I am working on the chassis that I pulled out the the ground/weeds at my late friend's house have am nearly ready to finally start the engine after quite a bit of work getting it unstuck and cleaned up inside and out. It still looks pretty ugly and rusty which I kind of like and I was fixing to order plug wires and a timer wiring harness but...

YEEEEEOOOWWW!!!

This is a nice pair of hard to find Firestone 30x3.5 demountable clincher rims. No heavy pitting, just some light surface rust. The clincher edges are in very nice shape. I wouldn’t be surprised if these have never been used.

Price drop!
$100 for the pair plus shipping in the U.S.

IMG_9107.jpeg

IMG_9109.jpeg

IMG_9111.jpeg

IMG_9113.jpeg

Looking for a burner base/stand and gas elbow/supply like the one in the picture.
Thanks!

Screenshot 2026-03-05 at 9.43.07 PM.png
s-l1600-2.jpg

20241028_161152.jpg
For sale: Rayfield carb and intake manifold $250 plus postage
20241028_161120.jpg 20241028_161051.jpg 20241028_161120.jpg

Free: Three rusty side and tail lamp bodies. One tail lamp is pretty beat up, the other is just plain rusty. The side light body has a lot of surface rust but you might actually be able to bring it back. They're free just pay shipping. I would prefer to get rid of all of them at once.

ttlb03.jpg

ttlb02.jpg

ttlb01.jpg

Thanks for looking!

Free: I still have a whole bunch of Truss Head (or mushroom head or brazier head) rivets, with a 3/16 x 1 shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or depot hack...

Sold to George! This large Rubes 3/4 twist horn is about 10 tall and is about 6 wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40 long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. Honks well. The rubber bulb is...

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

I have 3 Stromberg OF's for sale. Selling to fund additional projects.
1. Fully restored (on mounting stand) looks to have all new steel parts. Excellent Condition. $650 includes shipping lower 48.
2. Excellent condition may have been previously restored? Throttle linkage not original, I believe replacement parts are avaiable,100% clean...

I have been ask by a few people about another run of Upper Tapered Reamers and the Lower Reamer/Tap.
So I am posting here to see if there is enough interest in me making another batch.
I don’t know what price would be, but I am sure there would be a price increase. What hasn’t had one?
Only will be sold as a set unless I get more than 12...

Can anyone identify what Auto make may have used these?

Thanks

Rubes Horn For Sale as pictured,

has reed and honks.

$225 plus shipping.

rubes horn.jpg

This morning while checking the tire pressure I found a screw in my Blockley front tire. I guess it didn't make to the tube as the still had good air pressure and who knows how long its been in there. It renewed my faith in the Blockley tires and tubes. I bought these tires a couple years ago before all the issues with shipping. I'm going to order...

last year there were a good selection of Model T and Model T era autos and projects at the Duncan swapmeet ... will probably be a good selection of interesting cars and parts again this year ... this is the best way to see and purchase a vintage vehicle ... inperson and able to do a close ,detailed inspection and possibly drive a vehicle ... hope...

Model A Ford connecting rod mold used to pour babbitt bearings ... bearing is poured at 1 5/16 inch diameter with approx. .03 per side excess material on side flanges ... this allows for finish machining to any reasonable undersize or to standard diameter ...price $110 + $19.30 postage in lower 48 states ...actual postage outside this area ...Gene...

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $110 plus $19.30 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Babbitt bearing mold for model A Ford mainbearings … this mold will pour both the block and caps in the model A engine … mold pours bearings at 1 1/2 diameter to allow material for finish machining to standard or any reasonable undersize crankshaft sizes … written instructions are included as are my email or phone support … price $175.00 + $19.30...

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $150...

Completely disassembled and cleaned, viton tipped needle and seat conversion, new float, choke spring, ID plate, reconditioned spray needle with nice original knob, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

If you like a deep, steam train whistle and a high pitched whistle, here it is from an old garage with neat brass parts. There are two Aermore whistles, marked No.0 and No. 00 and a Fulton cutout which can be used with either. The cutout has double butterflies that work. The two whistles are in very good condition. Take a look at the photos. Price...

Does anyone here have a current contact email for John that they can send me off Forum ? Thanks !

RAJO OHV for sale. asking $4000 contact Tim PM me.
IMG_3041.jpeg IMG_3055.jpeg IMG_3056.jpeg IMG_3061.jpeg

A nice, large pair of electric headlights from about 1912 to 1915ish. These are probably too big for a Model T but? They are approximately 12 in diameter, 9 length and have 9 center to center for the mounting holes. These have convex lenses and single sockets. Brass bodies with nickel/brass rims. Very nice as found original condition. A great pair...

Hey All!
I am about ready to remount the body on the frame of my 1916 Touring car. Do the splash guards just sandwich between the body and frame rails?
Thanks,
Campbell Tellman II
Beaufort, NC

For sale: new spark plug wire brackets $12 plus postage

Nice working clean rim spreader.
$60 plus shipping

Happing Motoring.

rim spreader.jpg

Out of curiosity, I bought this thing from Lang's. I would like to buy a copy of an instruction sheet, advertisement or other helpful information as to how it is installed and its operation. Many thanks. IMG_0088.jpeg

I am going to part out my 1913 Roadster project. The body is going to be first to go. Very nice body and top irons/bows. Came from an auction in Ind years ago. $4500 pickup here. It Email me by forum. Dan
IMG_5236.jpeg
IMG_5253.jpeg
IMG_5242.jpeg
IMG_5244.jpeg

Just finished up a new batch of Stevens Front Axle Repair inserts. Be out for a while. Sorry for taking so long, but life gets on the way. Have both Upper and Lower in stock now.
Upper Tapered inserts $6.50 each
Lower Threaded inserts $8.00 each
All are + shipping.
Email me by forum. Thanks Dan
IMG_0598.jpeg
IMG_2391.jpeg

Here are some Old School style rope type main seals that work good on T engines. One will do a T engine. These are about 6.5” long and 1/2” square. Fits the front seal just right. Fit it in timing cover, trim it and use the rest in pan. I have a good stock of these, but when gone there will be no more. If you want any better get them while you...

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

This Budd knock-off cap can be used on Model T or Overland depending on the emblem. At one time, the Ford emblems were reproduced. Of course, you can just remove the Overland emblem. This is a very nice cap. Good threads, latch, etc. This has not been hammered to death. Hard to find in this condition. Price is 200.00 including shipping via FedEx...

never used 16 OD rim Fits 1919 to 1925 $40 plus shipping

For Sale is an original 1914 “Rubes” all brass Horn. There are 3 dents that won’t shown when mounted. SOLD plus shipping. Lang’s 1-800-872-7871

For Sale is a set of mounted Kevlar Band Linings with metal bands. This style was available 30-40 years ago and were mounted on accessory metal bands. SOLD plus shipping. Lang’s 1-800-872-7871

WANT TO BUY

... LEFT & RIGHT REAR COMMERCIAL FENDERS TO SUIT HACK OR C-cab. ...Re-pop preferred

.....im From Australia & visiting US in May .. possible pick up ??

Looking to purchase a pair of the Fork-mounted Electric Headlights. Restored or Unrestored, any condition considered as long as the lamps are complete and restorable.

Below are examples of what I am looking for;

Thanks!!

For Sale is a neat Windshield Mount Spot Light with rear view mirror. $50.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a rare 1926 - 1927 Kingston Regenerator Carburetor. Most likely needs to be rebuilt. $200.00 plus shipping Lang’s 1-800-872-7871

For Sale is a nice 1910 - 1913 2 piece driveshaft housing, no bump spool, ball and collar. $550.00 plus shipping Lang’s 1-800-872-7871

For Sale is an older “New” set of .100 oversize Pistons with pins. $65.00 set plus shipping. Lang’s 1-800-872-7871

For Sale is a usable low head for 1913-18 T’s. One spark plug thread isn’t as good as the others. A crack is developing on the water outlet flange. $40.00 plus shipping. Lang’s 1-800-872-7871

Hello fellow TTer’s again,
I’m now looking at moving forward with a seat replacement. Several years ago, I had a local upholster redo my one piece seat which again was not original to the truck. It works fine but is unwieldy to access the gas tank so went ahead and purchased Snyder’s repo seat spring set. In researching the old forum posts, it...

I am seeking assistance in locating a 1926 Ford Model T Coupe that holds significant historical and personal value.

The vehicle was sold in the late 1980s at the Minneapolis Armory. At the time of sale, the purchaser—believed to have resided in or near the Wisconsin Rapids area of Wisconsin—acquired several collector vehicles during the same...

Save the date. The Mother Lode Model T Club, Auburn, California will be holding their 51st annual swap meet. Sunday, May 31, 2026. Great meet to find those hard to get parts.

Hello all, up for grabs is a gently used Texas T water pump in great serviceable condition $150 plus shipping. Also a complete set of Model A wire wheel lug nuts, as you know they will fit Model T too, $30 plus shipping. I can be reached @ threethree02four12six4one, call or text, always good to hear from another T nut. Thanks Wingnut

For Sale are a pair of reproduction Sidelight Brackets for sedans or trucks. SOLD for the pair plus shipping Lang’s 1-800-872-7871

For Sale is an original 5Z-204 Ford Script Exhaust Pack Nut Wrench. $125.00 plus shipping. Lang’s 1-800-872-7871