MTFCA Forum

Does anyone recognize this spare tire holder? The clip on the bottom fell off and I need replace it.

Thanks,
Rod

Hi.
Meanwhile I successfully replace the roller timer by a new (similar) one.
I also verified the distance of 65mm / 2.5 between spark advance rod on timer and the screw at oil fill socket.

Because the battery was empty, I connected the battery charger and tried to crank start the engine for first test run while the battery is charging.

Of...

-
Would anyone have “one” cast iron Rocky Mountain Break Drum. I need to match the one pictured below.
Thanks,
Steve
Los Angeles
-
IMG_0684.jpeg

Told you it was bigger…

IMG_3192.jpeg

Hi all,

My name is Kevin and I'm the proud new caretaker of my late grandfather's model t.

tl/dr: I inherited a T. Bill Squires is awesome, and I'd never use anyone else. I'm in NW Tennessee, know little about what I'm getting in to, but know I want to do it right. I'd love to meet other folks in my area, even if it's just to share the love of...

The Harris family will have the King of the Hill Billy Poobah BBR RAJO engine (completely rebuilt) as well as the chassis that my Dad Frank Harris was building all for sale at the Long Beach Model T Swap Meet this Saturday July 19th. Mountainwagonplus.jpg
The chassis has a 1913 Ford block with California title. A full set of Buffalo wire wheels...

My second engine Ive built for my 21 touring ( damn broken crankshafts) was rebuild by someone decades ago and shelved, So naturally I go through it to make sure its was built well. Well it wasn't, cylinder clearance too tight, bearings too tight but Ive sorted that. However the 0.080 Pistons seem to stand proud a good amount more above the block...

20250718_104020.jpg 20250718_104026.jpg

Aluminum adapter. 1 1/2 x 1 1/2 oval to square flange.
Probably Winfield, but I cannot find it in my Winfield catalogue. Close to #81.

$40 + $15 shipping. Check or PayPal

Contact via forum. PM or email.

20250718_104013.jpg 20250718_104006.jpg

Nice Holley carb top.
I know zippo about this part. I do not even know if it is a T piece. $25 + $15 shipping. Check or PayPal

Contact via forum. PM or email.

20250718_103958.jpg 20250718_103953.jpg 20250718_103947.jpg 20250718_103942.jpg 20250718_103917.jpg

Nice script coil box lid. Has a few bumps and bruises, but easily filled and smoothed out.

$75 + $15 shipping. Check or PayPal

Contact via forum. Email or PM.

Since we no longer have body building personal in house, we are clearing out relative inventory. We have some top bows we would like to move out. These are steam bent oak, 1” thick by 1 1/2” wide and they have the ends shaped to go into the sockets, which saves you a big job.

09-10 roadster and touring
11-12 roadster and touring
10-11 torpedo...

For Sale, two black sidelamps, round lens. Left one Jno. Brown Model 540. Right one is E&J no model number needs lens door frame small spring clip. Both Ford script. Both with thick rear mount nuts. Sorry, no mount brackets.

Four fonts. One unpainted looks to be Jno. Brown with marked script Brown on bottom. Black painted font marked E&J No 3-414...

Looking at Ford script hand oiler cans, how can on tell a T era can from a Model A era can? How can one tell an original T can from a reproduction T can, as I know they used to be reproduced (I have one)?

Here are 5 gas outlets for 26/27 extra to me. ( I don’t have any 26/27 cars). $50 + shipping for the lot. Don’t know anything about them except they are 26/27 and for sale. Email me though the forum. Thanks Dan
IMG_4443.jpeg
IMG_4444.jpeg

20250714_102446.jpg 20250714_102259.jpg 20250714_102259.jpg

Zenith side draft carb. Looks complete. Condition unknown. Sold as is core. $40 + $20 shipping. Check or PayPal

Contact via forum. PM or Email

I need a good hub for a rear wood spoke wheel. Newly acquired roadster that’s been sitting more than 50 years and it’s my first T. Learning from scratch.

Here are some NOS hood rod supports for 17-22 wood firewalls.
See pictures. $10 each + shipping. Have more than shown. Later one in top of picture is for reference. Email me through forum. Thanks Dan.
IMG_4446.jpeg

Here are some NOS #4002 hood rod supports extra to me. $5.00 each + shipping. I have more than in pictures,so email me though the forum. Thanks Dan
IMG_4448.jpeg
IMG_4449.jpeg

Heavy cast aluminum valve galley cover with ROOF raised lettering for T engine. Back side of plate has raised ribs to allow use on early or late blocks. Clearly reproduction, probably from the 70’s. Mounting holes have not been drilled, was polished at one time. Plate is 7/8” thick. $200 + shipping. Please email thru forum

IMG_2877.jpeg...

It's always fun, to me, when working on the T, to look for where there is 'Ford' stamped into each and every part. I thought this would be a fun thread to have, posting pictures of all the 'ford's on our Fords. :)

Here's one, on a rear axle shaft.
Where's the ford on your car?
20250701_175001.jpg

Here are some “Real McCoys”. These are Ford script NOS Tie Rod bolts. Came out a Ford dealer in north Tn that closed in 1928. Still covered in the wax they put on them at Ford. Top one has been buffed on wire wheel to remove it.
$50 a pair + shipping. I have more than shown in pictures. Email me though forum. Thanks Dan
IMG_4452.jpeg...

Got some of these nos. I know they are good rod support, but for what? I found 4002 in parts catalog the are for later cars. Are these for 17/22 wood firewall cars? Thanks Dan
IMG_4446.jpeg
IMG_4447.jpeg

71st Long Beach Model T Club Swap Meet is coming fast! Saturday July 19 at Long Beach City College Veterans Stadium 7:00AM. Visit lbmtc.com for flyer, registration form, or details. Don't miss one of the oldest and best Model T, Model A, and Old Ford swap meets in the West!

Other threads on this forum have been asking where to get WOSP 12 volt starters. Snyders shows out of stock and the other WOSP dealers likewise. I decided to go to the source, Neil Tuckett of England's Tuckett Brothers, who originally designed the starter along with WOSP. Here is his reply: I have spoken to WOSP direct and they say there should be...

Does anyone know what month in 1917 they started using the flanged oil pan? Thanks

IMG_2461.jpeg IMG_2459.jpeg IMG_2460.jpeg IMG_2472.jpeg IMG_2467.jpeg

Anybody have one?

Thanks,
Michael

I am looking for a nice Wood Wheel Rear Hub for a 1926. If someone has one to sell and is coming to the Owatonna Tour in a week or so, that would even be that much better as it would save on boxing and shipping.

TIA

Making room for bigger and better toys! This is kinda T related, as it regularly dimples new wire wheel rims, and may have even made T parts when it was new. 20 Tons of fun to annoy your neighbors with! Nothing says “it’s Sunday” like the “ka-chunk ka-chunk ka-chunk” of a punch press on a calm morning. You can even tell em good nite too. First one...

Waukesha Ricardo intake manifold, any out there?

-
For those who might be familiar with Model T Ford Speedster Performance Equipment, what do you think about running a 16 Valve Model C Roof Head in a Speedster? Are there any mechanical or reliability issues that I might want to be aware of or maybe be watching out for when out motoring? ...Or, are they as reliable and easy to run as any other...

Are WASP 12V starters still being made? I see that Snyder's is temporarily out of stock

Is anyone going to the National Motor Camp at South Lake Tahoe in July? I am going to be there and hope to meet a bunch of new friends. Dennis IMG_0874.JPG

Just wondering if anyone else has seen anything like this. I found it in the 1912 I brought home this last weekend.
IMG_0014.jpeg

Saw this on Detroit Craigslist. Good looking 1925 runabout with a peddlers box. Not mine so please do not contact me.
IMG_6602001.jpg

Complete Hall Scott TT Ruckstell axle for sale. Fairly complete from u-joint to hubs. Spins over and shifts. $400obo. Pickup in Salem Va. call or text anytime. 54zeor-76one-2303

Brad

I’m new to model Ts wondering if there are any members in the U P. I’m in menominee

It’s not Peoria, but an interesting array of automobiles in Decatur Illinois, July, 1905. 66 cars were reported in this newspaper article. Ford Motor Co., just completing their 2nd year of operation, is the fourth largest in number of cars in Decatur.

IMG_8811.jpeg

IMG_8810.jpeg

I'd like some recommendations. Looking for some lightweight folding chairs that are compact enough to be carried in or on a touring car at events. I want something sturdy, rated to 300 lbs (I weigh 280) with armrests and a seat wide enough not to to pinch my ......you know. Some of the hunting chairs I've seen (Muddy, etc.) look like they might do...

Selling my dad’s 1916 model t. The body, interior, and frame are in good condition. I can’t get it to turn over and don’t have time to finish the project. All the parts are there and it did run when it was put in storage years ago. I’ll do my best to answer any questions but knowledge of this car is limited at best.
(818)266-0667
Camarillo Ca...

2 new sets of TT shackles with new. Bobs last batch before selling to birdhaven. Same as in picture below. $100 a set plus’s the ride. Give me a call or text anytime. 54zero-76one-2303. No pm or forum emails. They get lost. PayPal F/F works well for me.

Brad

Not sure if this is the right category, but I submitted a membership application last week, and wanted to know if I'm supposed to get a confirmation email or something? I did get a confirmation from paypal that payment has been submitted...

I went out tonight for dinner with the car club and my 22 conked out as I pulled into the parking lot. It has spark and compression so it is a fuel issue. Turns out my NH carb was pouring out gas. I tapped it and the fuel stopped. Then I could start it and it would run fine but would conk out after a bit, I think when the float was overwhelmed and...

I’m new to model Ts wondering if there are any members in the U P or NE Wisconsin. I’m in menominee

Not one auto parts in my area is carrying conventional motor oil, Its all either a full synthetic or a blended synthetic oil. I was lucky to find a five gallon pail at my local NAPA of 30# conventional for the model T which should hold me for a very long time as I don't drive the T very much anymore. I was running 15/40 Rotella but thats even...

Having spent 4 years in the Marines from 1972 to 1977 and running 3 miles a day, it destroyed my knees. It has been 48 years since my discharge from the Marines and I have waited as long as I can. I am almost a cripple and it has finally come to the point where I need to get knee replacement surgery. I will be having the right knee done on July 25...

Hello, my name is Kevin and I just purchased a 1923 Ford Model T Tudor. The car is very complete and original looking. It needs a few things to get road worthy. One thing it is missing is the gas tank. I've been a car guy all my life, so not new to cars. My question is this, where does the gas tank reside in a Tudor? The information I have read...

For Sale: 1929 Roadster pickup chassis. Listing as parts since it is not complete.
Has model B engine bolted in, but it needs overhauled.
No trans but model B pan adapted for model A trans.
Pretty much complete running gear other than no trans. Steering is operational.
Comes with clear Illinois title.
Also have new lower patch panels.

$3,500...

20250716_152557.jpg

Nice repo brass sediment bowl. Still in bag.
$65 + $12 shipping. Check or PayPal.

Contact via forum. PM or Email is fine.

I am having knee replacement surgery on July 25. Anyone who has undergone this procedure, please read my questions on the OT forum. Thank you. Jim Patrick

Original Ford key board rack. Holds key #s 51-74. Each key included!
The white letters and numbers have been repainted/touched up as shown in the photos.
Very nice condition, all the hooks are intact and straight.
Asking $1500 including shipping CONUS.
Thanks!
Nick
psunicholas@yahoo.com
551 427 1593
keyrack.jpg

keyrack2.jpg

keyrack3.jpg

20250716_153508.jpg

Should polish fine. $40 + $12 shipping.
Check or PayPal

Contact via forum. PM or email.

17-25 new hack aprons. Epoxied and show quality cut and buffed black paint. Bolt on ready. 300.00 plus shipping. Did these for a customer that went a different direction. Pictures upon request. Contact through this website. Mark Eyre Battle Creek Mi.

Title is Spark Plug tire inflator which is partially correct. Yes, the device fits into a spark plug hole, and yes, it inflates tires....box says from flat to inflated in less than 2 minutes, but the pump can be used wherever compressed air is required: inflating beach toys, air mattresses, spreading pesticides or fertilizer, paint, blowing away...

IMG_6369.jpeg IMG_6371.jpeg
SOLD.
1909 - 1912 Brass Windshield Frame Complete with glass setting Channel, came from
Snyders T-40300, it is still wrapped in original packaging. $350 plus shipping. Call
With any questions. (740-501-5888)

Ford Sale: A set of four early 1928 AA wire wheel hubcaps.

$310 includes shipping to lower 48

AA caps.jpg AA caps 2.jpg

For Sale: Two model T headlights.

$50 for pair, plus shipping

For Sale:
Spare carrier for 21 rim.

$100 plus shipping

tire carrier 21.jpg

For Sale: 14.75 outside diameter.
Cast iron spider.

$150 obo plus shipping

black T wheel.jpg

For Sale: one set of shackles. Ford Script.

$110 includes shipping to lower 48

shackles.jpg shackles 2.jpg

Whilst rebuilding my rear axle and driveshaft, I came across an error in the drawing I made of the 22-27 driveshaft. The parts 2596, 2591 and 2591B were in the wrong alignment.

1922-1927.jpg

Also added the Spool Cap Screws 2584B and the rear axle Pumpkin for reference.

20250716_153044.jpg 20250716_153050.jpg

High volume intake manifold. Never installed.
$125 + $12 shipping. Check or PayPal

Contact via forum. PM or email

I recently replaced the bushing for the hand crank. I cannot engage the claw with the pin on the crankshaft. The crank with out the claw mounted on it appears to be hitting the front of the crankshaft too high for alignment of the claw, in othewords the bushing is not correctly in straight. What did I do wrong, and how do I avoid this issue when I...

How do I find my member number so I can post on the classified pages? I have no idea what mine is.

I recently had to replace my original 1916 round gas tank. the left end had been cut open by a previous owner and poorly repaired. When it started to leak last year I attempted a repair with JB Weld's Tank weld. It held a year but I pulled on a loose end last week and it pulled right off. Due to time constraints I ordered a new tank from Kevin...

Posting here in hopes of getting some help. My wife is in love with the model k. She saw one when she was a kid and I’m hoping someone here has one close to New England and would be will for us to come look at it and even possibly get a ride for her we have a couple of model t’s if you can and are willing to help do this please reach out via text...

Well, I picked up some carburetors at the Iola show last weekend - two L4 Kingstons (one bronze body, one iron) and a Holley G. I spent some time disassembling and cleaning them up, and it looks like I won the lottery on the Holley, with the exception of the float. As for the Kingstons, between the two of them I've got enough good parts to build...

20250716_152950.jpg 20250716_153016.jpg

Nice repo 19-25 dash. I do not think they are still made.
$100 + $12 shipping. PayPal or check.

Contact via forum. PM or email

I was just thinking about this. It's not the question you would think. What I've been wondering is this: how long was the T considered a viable, sought after piece of transportation back in the day? When did they disappear from being seen regularly on city streets, parking lots, Used Car Dealers lots? Was it because they were an old used car or...

20250716_152913.jpg

Nice repo NH from Snyders. Out of stock.
$200 + $20 shipping.Check or PayPal

Contact via forum
PM or email.

Curious if one is out there.

20250716_152554.jpg

Nice iron sediment bowl. Arm moves. I have not tried front cover. $45 + $12 shipping. PayPal or check.

Contact via forum. PM or email.

20250716_153441.jpg 20250716_153458.jpg

Decent brass sediment bowl. Cover loose, handle moves, clean inside. $75 + $12 shipping. Check or PayPal

Contact via forum. Email or PM

In nice shape with good glass. $70 for the set plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! Do RAY.jpg DO ray 2.jpg

For Sale: Nos Wickwire starter spring.

$17 includes shipping to lower 48

wick wire T spring 2.jpg

For Sale; Round bracket Rubes Horn.

Has reed and does honk, honk.

$225 plus shipping.

rubes horn a.jpg rubes horn a 2.jpg rubes horn a 3.jpg rubes horn a 6.jpg rubes horn a 4.jpg

For Sale: 1914 Wood Steering Wheel with cast iron spider.
12-3/8 ID.

$150 plus shipping

1914 steering wheel.jpg 1914 steering wheel 2.jpg

For Sale Hood shelves for 17 to early 23.

$50 plus shipping.

hood shelves.jpg hood shelves 2.jpg

For sale: Front axle with spring perches and bushing $125 plus shipping
20240619_085254.jpg 20240619_085310.jpg

for sale: crank handle $25 plus postage
20240619_073658.jpg

For sale: exhaust manifold $50 plus postage
20250607_170344.jpg 20250607_170059.jpg

I am looking for several, as many as 7, detachable Transmission Band Ears, part #3414C, for 1926-27 Model Ts that have two (2) long rectangular slots to attach to the bands. These are different from the early round hole ears. Please let me know how many you have, the cost, and how I can get you paid. Thanks in advance and have a great day.

IMG_3093.jpeg IMG_3094.jpeg

1926/1927 Stewart Warner 490 speedometer. This setup is for wire wheels. $700 includes domestic shipping UPS. Thanks

Speedometer is sold. Thanks

Teeth are in good shape. Just needs the rust cleaned off

$25 or best offer. Buyer to pay shipping or free pickup in Southern California.

IMG_0463.jpg

1919-1925 hogshead (made for cars with starter). Appears to be in good shape. Includes clutch pedal, clutch release ring, and clutch lever.

$75 or best offer. Located in Burbank, CA. Willing to ship if the buyer is willing to pay the shipping!

IMG_0459.jpg IMG_0460.jpg IMG_0461.jpg IMG_0462.jpg

120 years ago today Charles Miller and Bro. of Washington D.C. placed the following advertisement, “A Car of Model B ….. Just Received.”

IMG_6268.jpeg

A quick check of the Miller Accounts Receivable ledger (compliments of The Henry Ford Museum, all rights apply) reveal several items.

IMG_6269.jpeg

Closeup:
IMG_6270.jpeg

First, we see...

Need a pr. of 1910-15, 7/16” truss rods that run between the running board brackets. Thanks for your help.

71st Long Beach Model T Club Swap Meet is coming fast! Saturday July 19 at Long Beach City College Veterans Stadium 7:00AM. Visit lbmtc.com for flyer, registration form, or details. Don't miss one of the oldest and best Model T, Model A, and Old Ford swap meets in the West!

Here are a couple pictures of some original striped wheels. I think the color photo is of a pre-1912 and the black and white is of a 1912. I am going to get my wheels striped so I am interested in which is original for my late 1911/early 1912 Commercial Roadster. I personally prefer the striping in the color photo, but will go with what is...

…..for 1923-25 Ford touring. Complete. Stiff from surface rust but will fold for shipping. Only $130 + FedEx
gwhouse731(at)gmail(dot)com

My July-August 2025 The Vintage Ford magazine arrived today and gave me something to read this afternoon.

It also gave me two questions.

1. Has anyone ever seen or owned one of these devices that is shown on Page 41?

2. What was the Voltage and Amperage the unit supplied to the Coil Ring?

For Sale is a 1914 Roadster. This is an older restoration of an original vehicle. Since I have owned it, I have made a few repairs to the car. I installed safety glass for the windshield, rebuilt 3 wheels, installed new top and made a few adjustments. The car runs well. The new wood for the body was installed by Ray Wells. There are a few...

Anyone using an other method of payment that PayPal for sales & purchases on the classifieds? Or should I just go back to checks only?
Craig.

I have 1926 model T roadster. Cannot get NH Carb to quit leaking gas from the throat.
New viton tip needle valve and seat and new float, all gaskets replaced. Adjusted float level to 15/64ths, works on the bench but as soon as it is installed it leaks a stream. Leaking stops when air screw is screwed all way in.
Anything I’m missing here? Replace...