MTFCA Forum

The time has come to pass the torch so to speak. I have taught my grandson the methods of babbitt pouring of model T main bearings and the procedure of boring and align reaming the bearings. I have been doing babbitt work for 40 years, but the time has come to share the knowledge with a younger person.

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

After finally getting the engine to run in a friend's newly-purchased '26 T, it was noted that the ammeter did not register a charge even when the engine was revved up. The ammeter was wired backwards (of course!), showing a charge when the lights were tested. Once the ammeter wires were corrected, turning on the headlights gave a discharge on the...

Will a 6 volt alternator putting out 40 amps charge a 8 volt battery...

NOT good.
Pulled the engine to put a rebuilt transmission on.

Put the car back together and when I checked the oil prior to starting the car it had oil in it (I installed a dipstick years ago).

Changed the oil and pulled the head thinking I had a blown head gasket. Replaced the head gasket (didn't really look bad) and reassembled.

Started the...

“Original” Smith just installed a side-mounted spare on his 1925 roadster pickup. Looks sharp, almost sporting - and really changes the look of the car.

I was in a local IKEA store and noticed they had cocoa floor mats for sale. The mats are perfect for the rear floor of 1910-1916 touring cars and are very reasonably priced. They are large enough so that they can be trimmed and fitted to the floor and look to be durable and nicely made. If you need a correct looking rear mat, this may be the...

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

Same press as illustrated throughout the Ford Service Manual. Smooth action, no thread wear. Local pick up. $750. Will sell stand with press only. Negotiable. Contact me by email through the website and leave your contact info
Richard Gould
20260112_074942.jpg 20260112_075840.jpg
20240315_112718.jpg
20260112_092541.jpg

Response to my query recently was so bad that I am not planning on many parts, yet there was one fellow who seemed excited about the prospect, so I decided to proceed with a VERY small number of parts (like 4 or 5 each and that's it...)

I finished up a couple and will do the rest in the spring time

If you're interested in either needles or...

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

Hi…..I can’t find a picture of one online, I think that they were made of canvas.

For Sale, nice looking touring 23- 25 top sockets. $250. Call for more pictures. Steve 701 212 5009

For sale EKERN emergency rear axle fixture. Axle rotates smoothly. Grease cup is filled with synthetic grease for long life. Threads are in good shape. Used as a temporary fix to get you home after an axle break. Price $150. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

For Sale is a dainty toolbox that would be mounted on the running board or body. Hasp is Brass and the box is very solid. There are some extra holes by the hasp as shown in the photos. SOLD plus shipping. Lang’s 1-800-872-7871

It's been 11 years ago that posted looking for information to identify a carburetor. Turned out to be a Wizard or Simmons, no markings on it.

Since then that carburetor has been sitting on the shelf collecting dust. I'm now retired and thought I would take a shot at bringing it back to life.
The two things needed for it are the flapper and the...

Hello all during rebuild of the gearbox i discovered the gear casing is cracked at the pin of the triple gear, does someone tried to repair this or does someone has one used for sale and eventually also a set of triple gears

Looking to buy 1 or more Weber 1910 wheel dollies. I have 3, looking to fill out the set and more would be great. Look at the pictures. I want a set for my unrestored 1911 open runabout. Thanks, Bob, 507 458 6778.

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

IMG_5241.jpeg This is the first time the carb has been off in 30+ years.

It’s an NH

What ‘magic’ was it supposed to do ? ( the coil spring)

Thanks in advance….

No name. Beautiful brass & glass. No cracks or dents. Has burner. Entire chimney nickel plated brass as is entire font
Beautiful multifaceted glass in rear. Only $110 + the ride.
gwhouse731(at)gmail(dot)com

Pat’ Dec 9, 1908…Original paint and perfect condition. Complete. No cracks in glass or brass. Believe for 1913-1914 Ford. Only $180 + shipping.
gwhouse731(at)gmail(dot)com. First caller gets it

When I was putting the 22 into the garage for the winter, I couldn’t back it up my very low slope driveway. I had a bunch of things to do before I could get into it to find out what was up. I took the transmission cover off today and I can’t see anything wrong. The triple gears look fine, the drum shows no sign of heating or cracking, and what...

My “good neighbor “ the land developer tried to destroy my property corner post with his water runoff “project “.
So I used an old school patch job.
IMG_5221.jpeg

SOLD Stevens spindle bushing re-facer. Marked STEVENS NO. T-290 . Threads are in good shape. Price $285. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens drive shaft sleeve puller. All threads are in good condition. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens piston vise. Good threads and jaws (lead). Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens generator gear puller. Good threads. Price $165 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Hello everyone. A very sad day here, Dick Hautzinger passed yesterday. I was very fortunate to know him for quite some time and travel to many swap meets, shows with him. I was always surprised by the amount of people that knew him wherever we traveled. His knowledge of Model T’s was endless.

A wonderful family man and friend to many that will...

Got this with a car we bought, don't need it, I'm asking $300 it is all there plug and play if you will. interested can text me at three three zero 2four1 two6four 1.

I recently dumped the pan for the first time on my T only to learn that the 'stock' engine I was promised actually has an A crank/ billet mains/ A rods/ and a big cam (you can imagine my surprise!)

Anyway, I think that the logical next thing to to is look into an OHV conversion. I'm too poor for a Rajo so the 1928 Chevy head seems like the...

Have a lowered 1913 Speedster project. Looking for different ways to mount a friction single lever shock to the rear axle.

I will mount the single lever friction shock parallel to the rear frame cross member.
These shocks have no name or markings. The shock has 2 rubber discs between the shock body and the adjustable tension lever. I am wondering...

Here are a pair of NOS Battery cell tops for the 1925 Rubber case Ford battery. They don’t say Ford on the but came extra with my NOS Ford battery. Taken out of a Ford dealership in the 1960. $30 for the pair + shipping. Email me by forum. Dan
IMG_5149.jpeg

IMG_5150.jpeg
IMG_5151.jpeg

These are machined from 6061 aluminum and fit the back nut on an aluminum Warford transmission. $60.00 shipped!

You can DM me to purchase or get one at rawaequipped.com

IMG_2719.jpeg IMG_2718.jpeg IMG_2721.jpeg

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

Here are some bell cranks that are Nos. See pictures. &10 each + shipping. Email me by forum. Dan
IMG_5133.jpeg

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

Wanted: One 1915-27 electric headlamp rim in unusable condition. MUST have at least ONE usable bracket on backside with usable tabs. Rest of rim, unimportant, as I will cannibalize rim for one lens bracket. Willing to pay shipping. Contact me through this site's messenger.

For Sale is an original 1915-early 16 Tail Light, License Plate Bracket in good condition. $60.00 plus shipping. Lang’s 1-800-872-7871

IMG_4789.jpeg IMG_4475.jpeg IMG_4413.jpeg IMG_4492.jpeg

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $110.00 plus shipping. Lang’s 1-800-872-7871

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $25.00 plus shipping. Lang’s 1-800-872-7871

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$135.00 plus shipping. Lang’s 1-800-872-7871

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $1500.00 plus shipping.
Lang’s 1-800-872-7871

For Sale are “Fronty” Script that mounts to the radiator core. Mounting hardware is NOT included. Available in solid brass or stainless. $49.95 plus shipping Lang’s 1-800-872-7871

For Sale is a very nice “Ford Script” Transmission Door for late 1911-1912 tapered transmission cover. It is in excellent condition with no pitting and a very crisp script. It has been glass beaded. $150.00 plus shipping. Lang’s 1-800-872-7871

Only $60 + USPS flat rate small. Another sandblasted recently sold here for $100. All threads used tap or dies already and in good condition.
gwhouse731(at)gmail(dot)com

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $85.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. $700.00 plus shipping Lang’s 1-800-872-7871

26 generator was functioning in the car.
On this car I have rebuilt the drive train, so I thought it would be a good idea to go over the starter and generator.
The previous owner had gone through the generator as it has a new insulated brush plate. The field coils are not new, however they are not grounded . Checked the armature on a growler,...

WTD looking for used ,top for 1913 touring car. i have a real nice car very original car i have a new top but id like a good used one that i can fit to the car, if i put the new one on it might ,not, look right .

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Completely disassembled and cleaned, viton tipped needle and seat conversion, little to no wear on throttle shaft with bushings installed top and bottom, new choke spring, reconditioned spray needle, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

I’ve been making new transmission drums for a little while. I’ve made a sample main shaft and now i’m considering making gear sets for the transmissions. I started by making one triple gear to see if I could do it. I think I’m going to try to make a full set and have them heat treated.

Hi, Looking to buy a full set of good 26/27 Wood Wheels and Hubs. Happy to pay for shipping to Chicago.

Thanks

I am new at this. I will get names of stuff wrong. Please be patient and try to interpret.

I was planning to change all fluids, greases, etc. in my 1923 touring car.
First thing was oil change, and I immediately saw the new oil spilling out.
Found a 1 long vertical cut in the outmost edge of the pan where it surrounds the flywheel.. drivers...

1926 Touring, sudden-onset problem of slipping in high, but low and reverse are fine. Peeked inside for clues and found the clutch fingers quite loose. Had the clutch spring broken in service? Careful inspection showed it was intact, but...

After much puzzling I finally noticed that the clutch spring and spring cup were pushed right back the...

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.
I was hoping to post a short video of the fuel vapor coming...

My 1926 Roadster Pickup is 100 years old this month.
I drove it to the beach then drove it home in the rain.
IMG_8189.jpeg

-

Jan 9, 2026

Dear 2026 Bakersfield Swap Meet vendors and attendees,

For personal and practical reasons, it has been formally decided that I will no longer be spearheading the 2026 Bakersfield Brass Era/ PreWar Swap Meet. Therefore, all vendor fees received thus far, or by me in the future, will be returned via the self addressed stamped...

No dents original Ford script oil can and holder. Real nice condition. You won't find a better one. Price drop $125.00 plus shipping.

Ed aka #4

Model T Ford coil tester. this is a rare nice original oak varnished wood coil tester. Big price drop $150.00. plus shipping. I definitely want to sell it.

Another question for the team, when recharging the magnets on a magneto in the car, do you have to touch each magnet individually or just at the mag post? i’m working on a 1925. I have the hogs head off to inspect the coil rings. Everything looks good but the mags are weak. I was planning on doing the flash charge with a DC welder.
Thank you

Looking for information on the manufacturer of these wheels. They have an odd tapered hubcap.

ASSORTMENT OF USED SPARK plugs plus parts shipping included domestic

Here is a set of Windshield cones nuts snd filler blocks. Maybe NOS not sure. Blocks are. $35 + shipping. Email me by forum. Dan
IMG_5146.jpeg
IMG_5147.jpeg

Here are a pair of windshield filler plugs for lower frame 23/25 open car. Part number 7803brx. This is the piece that goes in the end of windshield frame so the cap can fasten on and the frame can be bolted to the uprights. When was last time you saw a pair of them NOS? $15 for pair + shipping. Email me by forum. Dan
IMG_5126.jpeg...

This is the last set I have available this year. This is an outright sale of 4 coil cores with new replacement orange drop condensers, new KW style point sets, ECCT calibrated for equal firing time. .... $425.00 USA shipping included.

Sold! This is a really nice original radiator. Barn find. Actually from a garage full of neat stuff. It has the wire tube on the rear of the core. The stamp on the rear is #1106703. The tank below the neck area is slightly pushed in but it could be easily pushed out. The fins are good throughout. The neck is good. Both the water inlet and outlet...

What is the proper name for the type of fastener that is commonly used with sheet metal screws in applications where a nut and bolt can't be used. they ware always made of spring steel and can be flat or slightly curved with different sizes for different size screws and applications, I loked at McMaster-Carr but didn't really know what to call...

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

I recently started working on the engine of my model s. The main bearings have to much play. In the manual i did see the babbitt bearing is a loose bearings is that the case? Can i just press a another bearing in de block? IMG-20251223-WA0010.jpeg

I am wanting to buy one of these axle cradle tools that mount to a bench and holds the rear axle housing for assembly. Apparently, the vendors don't sell them anymore. Does anybody have one that they are willing to let go of?

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Got my notice from AACA for Hershey space renewal. First year since Blue field I will not have spaces at Hershey. Not worth it . I may still go but just to walk around. Go to keep going to Luray, better to me than Hershey. Hope to see you all there. Dan

Selling this Stewart model 12 50 mph speedometer with mileage tracker used only in 1909 on model t’s asking price is 400 plus shipping. Unknown internal condition. Please call or text George 2036873827

Hi, here’s an original nickel TT hubcap. As you can see in the photo it’s much bigger than the standard size!

$10 + $7 shipping. I’m in Dayton, OH. My regular hubcap is on the right and just for reference, that’s not included. Thanks!

Dec 5th 1925 was the 100th anniversary of the first Speedway meeting at the 5/6 mile banked concrete track at Maroubra, Sydney, Australia. Ted King raced his rajo there after quick repairs were carried out after his crash at Newcastle Speedway weeks before. It was a mad rush to put the car together over 7 weeks (without body) as best as I could...

WTB Dayton #3 pin drive Knock on hub cap for pattern to cast a set of new ones for my Fronty. Damaged ok.

Still looking for at least a body filler impression of the wording and top profile of this cap or buy a readable cap.

Any help appreciated. Thanks to the member here for the use of the photos.

Have a USA address to post to. No overseas...

In El Paso, IL.

Mark your calendar.

Registration forms are out.

Tin----Lizzy----one one seven at yahoo dot com (ignore the dashes)

I have published a Worldwide index of Model T Ford clubs... which will no doubt have some entries missing :D
This index includes the websites of each Club, contact details and addresses where available.
If you know of any that need to be added, please let me know — please ensure you include a website address, physical address and contact...

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

Constantly inspecting and cleaning up parts, I noticed something odd about my fan hub.
The belt hub itself spins true. The fan blades themselves spin true. However, the hub shaft and blade flange are spinning 0.097 off center!! The rivets for the blades were drilled true to shaft center, not with the flange.

Begs the question as to production...

Lamps. The one on the right (with magnet) has unusual steel top but otherwise complete with brass top font and burner. No cracks in glass or brass. The other, left side 110, has a dent in black painted top of chimney and back panel. This one has no burner an no cracks in glass or brass Best offer over $200 + shipping until 25 January....

A bunch of wheels for sale. All need hubs most are in ok shape. Asking $25 each plus shipping or local pickup. Please call or text only George 2036873827