MTFCA Forum

Hi all,

My name is Kevin and I'm the proud new caretaker of my late grandfather's model t.

tl/dr: I inherited a T. Bill Squires is awesome, and I'd never use anyone else. I'm in NW Tennessee, know little about what I'm getting in to, but know I want to do it right. I'd love to meet other folks in my area, even if it's just to share the love of...

Not sure if this is the right category, but I submitted a membership application last week, and wanted to know if I'm supposed to get a confirmation email or something? I did get a confirmation from paypal that payment has been submitted...

2 new sets of TT shackles with new. Bobs last batch before selling to birdhaven. Same as in picture below. $100 a set plus’s the ride. Give me a call or text anytime. 54zero-76one-2303. No pm or forum emails. They get lost. PayPal F/F works well for me.

Brad

Anybody have one?

Thanks,
Michael

Just wondering if anyone else has seen anything like this. I found it in the 1912 I brought home this last weekend.
IMG_0014.jpeg

Selling my dad’s 1916 model t. The body, interior, and frame are in good condition. I can’t get it to turn over and don’t have time to finish the project. All the parts are there and it did run when it was put in storage years ago. I’ll do my best to answer any questions but knowledge of this car is limited at best.
(818)266-0667
Camarillo Ca...

I went out tonight for dinner with the car club and my 22 conked out as I pulled into the parking lot. It has spark and compression so it is a fuel issue. Turns out my NH carb was pouring out gas out. I tapped it and the fuel stopped. Then I could start it and it would run fine but would conk out after a bit, I think when the float was overwhelmed...

I'd like some recommendations. Looking for some lightweight folding chairs that are compact enough to be carried in or on a touring car at events. I want something sturdy, rated to 300 lbs (I weigh 280) with armrests and a seat wide enough not to to pinch my ......you know. Some of the hunting chairs I've seen (Muddy, etc.) look like they might do...

I’m new to model Ts wondering if there are any members in the U P or NE Wisconsin. I’m in menominee

Not one auto parts in my area is carrying conventional motor oil, Its all either a full synthetic or a blended synthetic oil. I was lucky to find a five gallon pail at my local NAPA of 30# conventional for the model T which should hold me for a very long time as I don't drive the T very much anymore. I was running 15/40 Rotella but thats even...

Having spent 4 years in the Marines from 1972 to 1977 and running 3 miles a day, it destroyed my knees. It has been 48 years since my discharge from the Marines and I have waited as long as I can. I am almost a cripple and it has finally come to the point where I need to get knee replacement surgery. I will be having the right knee done on July 25...

71st Long Beach Model T Club Swap Meet is coming fast! Saturday July 19 at Long Beach City College Veterans Stadium 7:00AM. Visit lbmtc.com for flyer, registration form, or details. Don't miss one of the oldest and best Model T, Model A, and Old Ford swap meets in the West!

I need a good hub for a rear wood spoke wheel. Newly acquired roadster that’s been sitting more than 50 years and it’s my first T. Learning from scratch.

Hello, my name is Kevin and I just purchased a 1923 Ford Model T Tudor. The car is very complete and original looking. It needs a few things to get road worthy. One thing it is missing is the gas tank. I've been a car guy all my life, so not new to cars. My question is this, where does the gas tank reside in a Tudor? The information I have read...

For Sale: 1929 Roadster pickup chassis. Listing as parts since it is not complete.
Has model B engine bolted in, but it needs overhauled.
No trans but model B pan adapted for model A trans.
Pretty much complete running gear other than no trans. Steering is operational.
Comes with clear Illinois title.
Also have new lower patch panels.

$3,500...

20250716_152557.jpg

Nice repo brass sediment bowl. Still in bag.
$65 + $12 shipping. Check or PayPal.

Contact via forum. PM or Email is fine.

-
For those who might be familiar with Model T Ford Speedster Performance Equipment, what do you think about running a 16 Valve Model C Roof Head in a Speedster? Are there any mechanical or reliability issues that I might want to be aware of or maybe be watching out for when out motoring? ...Or, are they as reliable and easy to run as any other...

Saw this on Detroit Craigslist. Good looking 1925 runabout with a peddlers box. Not mine so please do not contact me.
IMG_6602001.jpg

I am having knee replacement surgery on July 25. Anyone who has undergone this procedure, please read my questions on the OT forum. Thank you. Jim Patrick

I’m new to model Ts wondering if there are any members in the U P. I’m in menominee

Original Ford key board rack. Holds key #s 51-74. Each key included!
The white letters and numbers have been repainted/touched up as shown in the photos.
Very nice condition, all the hooks are intact and straight.
Asking $1500 including shipping CONUS.
Thanks!
Nick
psunicholas@yahoo.com
551 427 1593
keyrack.jpg

keyrack2.jpg

keyrack3.jpg

20250716_153508.jpg

Should polish fine. $40 + $12 shipping.
Check or PayPal

Contact via forum. PM or email.

17-25 new hack aprons. Epoxied and show quality cut and buffed black paint. Bolt on ready. 300.00 plus shipping. Did these for a customer that went a different direction. Pictures upon request. Contact through this website. Mark Eyre Battle Creek Mi.

Title is Spark Plug tire inflator which is partially correct. Yes, the device fits into a spark plug hole, and yes, it inflates tires....box says from flat to inflated in less than 2 minutes, but the pump can be used wherever compressed air is required: inflating beach toys, air mattresses, spreading pesticides or fertilizer, paint, blowing away...

IMG_6369.jpeg IMG_6371.jpeg
SOLD.
1909 - 1912 Brass Windshield Frame Complete with glass setting Channel, came from
Snyders T-40300, it is still wrapped in original packaging. $350 plus shipping. Call
With any questions. (740-501-5888)

Ford Sale: A set of four early 1928 AA wire wheel hubcaps.

$310 includes shipping to lower 48

AA caps.jpg AA caps 2.jpg

For Sale: Two model T headlights.

$50 for pair, plus shipping

For Sale:
Spare carrier for 21 rim.

$100 plus shipping

tire carrier 21.jpg

For Sale: 14.75 outside diameter.
Cast iron spider.

$150 obo plus shipping

black T wheel.jpg

For Sale: one set of shackles. Ford Script.

$110 includes shipping to lower 48

shackles.jpg shackles 2.jpg

Whilst rebuilding my rear axle and driveshaft, I came across an error in the drawing I made of the 22-27 driveshaft. The parts 2596, 2591 and 2591B were in the wrong alignment.

1922-1927.jpg

Also added the Spool Cap Screws 2584B and the rear axle Pumpkin for reference.

20250716_153044.jpg 20250716_153050.jpg

High volume intake manifold. Never installed.
$125 + $12 shipping. Check or PayPal

Contact via forum. PM or email

I recently replaced the bushing for the hand crank. I cannot engage the claw with the pin on the crankshaft. The crank with out the claw mounted on it appears to be hitting the front of the crankshaft too high for alignment of the claw, in othewords the bushing is not correctly in straight. What did I do wrong, and how do I avoid this issue when I...

How do I find my member number so I can post on the classified pages? I have no idea what mine is.

I recently had to replace my original 1916 round gas tank. the left end had been cut open by a previous owner and poorly repaired. When it started to leak last year I attempted a repair with JB Weld's Tank weld. It held a year but I pulled on a loose end last week and it pulled right off. Due to time constraints I ordered a new tank from Kevin...

Posting here in hopes of getting some help. My wife is in love with the model k. She saw one when she was a kid and I’m hoping someone here has one close to New England and would be will for us to come look at it and even possibly get a ride for her we have a couple of model t’s if you can and are willing to help do this please reach out via text...

Well, I picked up some carburetors at the Iola show last weekend - two L4 Kingstons (one bronze body, one iron) and a Holley G. I spent some time disassembling and cleaning them up, and it looks like I won the lottery on the Holley, with the exception of the float. As for the Kingstons, between the two of them I've got enough good parts to build...

20250716_152950.jpg 20250716_153016.jpg

Nice repo 19-25 dash. I do not think they are still made.
$100 + $12 shipping. PayPal or check.

Contact via forum. PM or email

I was just thinking about this. It's not the question you would think. What I've been wondering is this: how long was the T considered a viable, sought after piece of transportation back in the day? When did they disappear from being seen regularly on city streets, parking lots, Used Car Dealers lots? Was it because they were an old used car or...

20250716_152913.jpg

Nice repo NH from Snyders. Out of stock.
$200 + $20 shipping.Check or PayPal

Contact via forum
PM or email.

Curious if one is out there.

20250716_152554.jpg

Nice iron sediment bowl. Arm moves. I have not tried front cover. $45 + $12 shipping. PayPal or check.

Contact via forum. PM or email.

20250716_153441.jpg 20250716_153458.jpg

Decent brass sediment bowl. Cover loose, handle moves, clean inside. $75 + $12 shipping. Check or PayPal

Contact via forum. Email or PM

In nice shape with good glass. $70 for the set plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! Do RAY.jpg DO ray 2.jpg

IMG_2461.jpeg IMG_2459.jpeg IMG_2460.jpeg IMG_2472.jpeg IMG_2467.jpeg

For Sale: Nos Wickwire starter spring.

$17 includes shipping to lower 48

wick wire T spring 2.jpg

For Sale; Round bracket Rubes Horn.

Has reed and does honk, honk.

$225 plus shipping.

rubes horn a.jpg rubes horn a 2.jpg rubes horn a 3.jpg rubes horn a 6.jpg rubes horn a 4.jpg

For Sale: 1914 Wood Steering Wheel with cast iron spider.
12-3/8 ID.

$150 plus shipping

1914 steering wheel.jpg 1914 steering wheel 2.jpg

For Sale Hood shelves for 17 to early 23.

$50 plus shipping.

hood shelves.jpg hood shelves 2.jpg

For sale: Front axle with spring perches and bushing $125 plus shipping
20240619_085254.jpg 20240619_085310.jpg

for sale: crank handle $25 plus postage
20240619_073658.jpg

For sale: exhaust manifold $50 plus postage
20250607_170344.jpg 20250607_170059.jpg

I am looking for several, as many as 7, detachable Transmission Band Ears, part #3414C, for 1926-27 Model Ts that have two (2) long rectangular slots to attach to the bands. These are different from the early round hole ears. Please let me know how many you have, the cost, and how I can get you paid. Thanks in advance and have a great day.

IMG_3093.jpeg IMG_3094.jpeg

1926/1927 Stewart Warner 490 speedometer. This setup is for wire wheels. $700 includes domestic shipping UPS. Thanks

Speedometer is sold. Thanks

Teeth are in good shape. Just needs the rust cleaned off

$25 or best offer. Buyer to pay shipping or free pickup in Southern California.

IMG_0463.jpg

1919-1925 hogshead (made for cars with starter). Appears to be in good shape. Includes clutch pedal, clutch release ring, and clutch lever.

$75 or best offer. Located in Burbank, CA. Willing to ship if the buyer is willing to pay the shipping!

IMG_0459.jpg IMG_0460.jpg IMG_0461.jpg IMG_0462.jpg

120 years ago today Charles Miller and Bro. of Washington D.C. placed the following advertisement, “A Car of Model B ….. Just Received.”

IMG_6268.jpeg

A quick check of the Miller Accounts Receivable ledger (compliments of The Henry Ford Museum, all rights apply) reveal several items.

IMG_6269.jpeg

Closeup:
IMG_6270.jpeg

First, we see...

Need a pr. of 1910-15, 7/16” truss rods that run between the running board brackets. Thanks for your help.

71st Long Beach Model T Club Swap Meet is coming fast! Saturday July 19 at Long Beach City College Veterans Stadium 7:00AM. Visit lbmtc.com for flyer, registration form, or details. Don't miss one of the oldest and best Model T, Model A, and Old Ford swap meets in the West!

Here are a couple pictures of some original striped wheels. I think the color photo is of a pre-1912 and the black and white is of a 1912. I am going to get my wheels striped so I am interested in which is original for my late 1911/early 1912 Commercial Roadster. I personally prefer the striping in the color photo, but will go with what is...

…..for 1923-25 Ford touring. Complete. Stiff from surface rust but will fold for shipping. Only $130 + FedEx
gwhouse731(at)gmail(dot)com

My July-August 2025 The Vintage Ford magazine arrived today and gave me something to read this afternoon.

It also gave me two questions.

1. Has anyone ever seen or owned one of these devices that is shown on Page 41?

2. What was the Voltage and Amperage the unit supplied to the Coil Ring?

For Sale is a 1914 Roadster. This is an older restoration of an original vehicle. Since I have owned it, I have made a few repairs to the car. I installed safety glass for the windshield, rebuilt 3 wheels, installed new top and made a few adjustments. The car runs well. The new wood for the body was installed by Ray Wells. There are a few...

Anyone using an other method of payment that PayPal for sales & purchases on the classifieds? Or should I just go back to checks only?
Craig.

20250714_102446.jpg 20250714_102259.jpg 20250714_102259.jpg

Zenith side draft carb. Looks complete. Condition unknown. Sold as is core. $40 + $20 shipping. Check or PayPal

Contact via forum. PM or Email

I have 1926 model T roadster. Cannot get NH Carb to quit leaking gas from the throat.
New viton tip needle valve and seat and new float, all gaskets replaced. Adjusted float level to 15/64ths, works on the bench but as soon as it is installed it leaks a stream. Leaking stops when air screw is screwed all way in.
Anything I’m missing here? Replace...

We've got this project for sale. Mostly correct 1915, and mostly complete. See the photos. Engine casting date of 11-9-1915, makes it a 1916 model, but still eligible for HCCA events. The front half of the body has the wood replaced. The rear seat is off and disassembled. Correct and solid fenders. Has demountable wheels but 30x3 non-demountable...

I have a great old tachometer that reads in hundreds of RPMs that I am using on my speedster. A while back I saw a tachometer drive that ran off the fan belt in a picture of an English car, but I can’t find the picture and have never seen another. Have any of you made, used, or seen a belt driven tachometer drive on a T or other car? If so, I am...

Restored as pictured, only needs a large cotterpin! $35 which includes 48 state domestic shipping. Contact me thru the MTFCA email messaging.

20241208_141129.jpg

Currently in indoor storage in 19365, Pennsylvania.

This trailer has better records than your Ferrari!
Ordered new in 1980, always stored indoors (except, of course, when on the road).
It has made 17 trips in its life totaling 14,990 miles.
Full floor and enclosure frame fabricated by the factory in 1989.
Last used for a...

Here’s a very nice original brass, left side, Dayton wire wheel hubcap. The spring tab is strong and works well. The threads look great. $225 with shipping in the US.

IMG_5785.jpeg

IMG_5790.jpeg IMG_5788.jpeg IMG_5787.jpeg IMG_5786.jpeg

New 7 Leaf Front Spring - Will fit 1909-1925 - (T-3801 1909-1918) Cost $315 , will take $180

New 8 Leaf Rear Spring -(T-3824-A7) Will fit 1919 -1925 Touring, Roadster, Sedan, Coupe. Cost $500, will take $300

Call for more information 740-501-5888
. IMG_6384.jpeg IMG_6385.jpeg

I recently acquired a large group of ancient (1910's to 1930's) negatives from the Kansas City Southern Railroad. These were once part of the railroad's files and are generally photos of railroad structures and the like. The Ford Model T manages to show up in some of the photos, so I thought I would share them here.

Jason Midyette

Getting ready to paint my brake drums. I would think a high temp paint would be a benefit. Does anyone have a recommendation on a good paint to use?

This is a as new in the original box ready to mount accessory for your ride. Asking $50 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! smoke tray 4.jpg smoke tray 5.jpg smoke tray 2.jpg smoke tray 3.jpg smoke tray 1.jpg

Here's a handy device that adds a stand pipe in the gas tank so when you run out of gas you pull the string and tie it off to get to the last of the reserved gas in the tank.The one gallon of gas remaining below the stand pipe will get you on your way to a filling station. Asking $65 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE...

Rare 1913 KW coilbox. Used on Model T Ford cars in the last half of 1913 production cycle. Faithfully reproduced by a professional cabinetmaker in Cherry wood using an original 1913 KW coilbox as pattern. Excellent quality workmanship. All holes and channels for internal wiring are included.
This complete coilbox package includes all the...

SOLD TO ELLIS……

For Sale New Rocky Mountain Brakes complete with Brake Equalizer and long hub bolts included for 1909-25
Small drum Rearend. Regular price $1100 will sell for $750. Call for more information- 740-501-5888. IMG_6416.jpeg IMG_6417.jpeg IMG_6415.jpeg

Posting for Keith Gumbinger. He'll chime in with more details.
How often do you see a castle nut with Ford script?!

I would like to buy a complete running engine to fit in my 1915 touring. Bob in Virginia

For sale is a 1927 Model T Roadster in good mechanical condition. A driver car. Runs great. New battery. Good interior and top. Located in Silver Spring, MD. $7,000. Clean MD Title.

Anyone doing coil testing and tuning located in nothern ohio.

Thank you

johnr

IMG_6106.png

It's always fun, to me, when working on the T, to look for where there is 'Ford' stamped into each and every part. I thought this would be a fun thread to have, posting pictures of all the 'ford's on our Fords. :)

Here's one, on a rear axle shaft.
Where's the ford on your car?
20250701_175001.jpg

For Sale: 1914/15 Canadian Touring
This is a 1914/15 Canadian touring. I bought this car in Detroit between 2001-2003 when I lived in Detroit. Reasonably complete car. Had engine fitted with Bu-Mac counter balanced crankshaft by Ron Miller of Ron's Machine shop in Shandon, Ohio. He did the mains, rods, and transmission as well as fixed a crack in...

Are WASP 12V starters still being made? I see that Snyder's is temporarily out of stock

Hi.
Meanwhile I successfully replace the roller timer by a new (similar) one.
I also verified the distance of 65mm / 2.5 between spark advance rod on timer and the screw at oil fill socket.

Because the battery was empty, I connected the battery charger and tried to crank start the engine for first test run while the battery is charging.

Of...

I have a set of Cartouche Side curtains for sale that will fit a 1915 through 1922 Touring car. The eyelets are brass for 15/16 as opposed to nickel for later years, but they can be changed out if you so desire. This set is about 20 years old but in excellent shape and still very soft and pliable. The windows are perfect. You may need to move your...

Took delivery this past week of a car delivered by Bill Auto Works. Fantastic service by Bill Squires who was very easy to deal with, very commutative. Always called to report progress with on time delivery. Quoted a price up front and stuck to the Quote. No surprises. Very professional, would use again.

The Harris family will have the King of the Hill Billy Poobah BBR RAJO engine (completely rebuilt) as well as the chassis that my Dad Frank Harris was building all for sale at the Long Beach Model T Swap Meet this Saturday July 19th. Mountainwagonplus.jpg
The chassis has a 1913 Ford block with California title. A full set of Buffalo wire wheels...

IMG_6108.png IMG_6107.png IMG_6107.png IMG_6107.png IMG_6107.png

IMG_6104.png

Anyone ever come up with a good way to rebuild the worn cam ramps on pedals? Hate to scrap a bunch of them if way to repair. Thanks Dan