MTFCA Forum

I have 10 original 1909-10 hubcap for sale. Not perfect but still very good. $40 each. Plus shipping. Kdmks AT att.net.

IMG_1525.jpeg IMG_1515.jpeg IMG_1403.jpeg IMG_1169.jpeg

I'm looking for a replacement low speed drum and was looking for help in what to look for.
Cracks across the band and across the ribs I've seen on videos but what about the outer surface condition?
And what if it has been turned in the past?

Thanks

KW switch. Works, key does not withdraw from switch. Fits Master Vibrator and 1913 coil box. Needs coil box front plate. $85 plus flat rate shipping.
USA only.

Accessory tire irons and wheel lug wrenches from a garage in Ashokan, NY. Also fits head bolts. Surface rust only. On has sticky surface from being taped. Rare, hard to find. $50 pair plus shipping. USA only.

Re-built 6 volt starter for sale. Bought in Carlisle as rebuilt and never used. I no longer have need for it and will sell it for what I paid. Will add picture later today. $275 plus shipping. USA only.

Every book and video I've seen mentions or shows 3 Driven Gear Sleeve Washers, but when I disassembled my transmission I found only 2 and one was fused to the shaft. Were there always 3 and one of mine got eaten?

What the shaft looks like now

I'm would say the shaft is unusable at this point with all the scoring

I think this car could vie for the best Torpedo in the world. It's absolutely spectacular. Early 1911 Torpedo roadster, ground up restoration, equipped as it left the factory. Authentic in every way. Impeccable restoration completed and the owner died. It never saw the road. The gas tank is sparkly clean. Comes with a few spare parts. $35,000.00...

What's up with Rootlieb? I get an error when I try their site. Is it down, changed or non-existent?

I am selling the parts storehouse of my dad and grandpa. As I get stuff out and sorted I will take pictures and list here.
First items are a rain topper for seventeen to twenty one goes at top of wood firewall $45
3 nice steering wheels with metal spyders and bakealike rims $39 each
double Flair tool with box $35
3 piece vacuum grip miniature...

For those who have been assigned to park at the Rotunda Center (17000 Rotunda Sr) off of the Southfield Rd. service/feeder, -or for the Lansing Run participants who are parked beside the Rotunda lot in the Link Engineering lot.

Since all of the construction is going on, there likely will be a lot of brass-era cars going back to their trailers on...

Our chapter had a shop day today. We adjusted the timing and carburetor on a distributor equipped speedster, replaced a stripped exhaust nut on a 1915 Touring, replaced the fuel tank in another 1915 Touring and successfully recharged a magneto in a 1917 delivery truck using the Carnegie method. None of the projects caught fire so I’m calling it a...

I found this elsewhere on the www. It apparently is a top to convert a Touring into a closed sedan. I have never seen one, not even a picture before. Anybody else got one? Can anyone direct me to more pics & info on them?

IMG_7593.jpeg IMG_7591.jpeg IMG_7581.jpeg IMG_7574.jpeg

Sold in pairs price + shipping (think USPS Flat Rate may be best way, will calcualte least cost)
All key ways look very good as do the threads. I'm planning to wire brush the threads and do a hub cap fit

--
Brown Patina $115
--
used TT rear hubs.jpg
--
IMG_6399.JPG
--
--
--
Gray (almost look NOS) $200
gray TT hubs.jpg
--
IMG_6396.JPG

I have a nice 26-7 gas tank with straps and rubber gromets, $150 plus shipping Call or e-mail for pictures, Thanks, Dennis 401-932-3191.

2 repo hubcaps, nice , $25.00 each. 4 originals , all have issues. See pictures. All plus shipping. Kdmks AT att.net

I pulled out my cars and my truck out this morning, to sweep the floors, and decided it was time for a photo.... :lol:

Once I got down on the pavement, I had a struggle getting up. Old age sucks.

angel.jpg

Have found a couple of screws located at the bottom rear of both door openings on our 1927 Tudor.

No idea what purpose they had - does anyone have an idea what they were doing there?

Up for sale is a bunch of reproduction E & J Carbide Generator parts, Ex the Late Bill Formby's business. We are just selling the parts off now.
There is E & J, but also Solar and Juno Brown parts as well,
if you are missing any little bits give us an email and we can look at what we have
Some parts include 10 E & J mounting brackets
E & J Locking...

10 new 1909-1912 E & J Carbide Generator mounting brackets, excellent reproduction $130US delivered anywhere in USA and Canada.

A few days ago I put an ad on Facebook Marketplace for our '21 Touring. Since it was gassed up, tires inflated to proper specs, and ready to drive, we, my wife, and my three grandsons, ages 8, 14, and 16, and I took it for a ride today. Now I'm a little less motivated to sell it.

Brass hubcaps, 1914-16. Take your pick, no cracks, all are in good to better condition. $20 each plus shipping. Kdmks AT att.net.

Exact 09-10 fan blades die stamped with mounting holes. $140 for a set of 4 , postage $11 US , 09/10 blades have greater pitch than the later blades IMG_8518.jpeg IMG_8519.jpeg , Lang’s will rivet the blades on your hub including the rivets for $30. Larry Debaugh 4103361728

I wonder how many T guys are in the dark about using original valve stems. Yesterday, I had the pleasure of talking with a well know tire guy, and he was totally in the dark about how those early valve stems are mounted to the tubes!
The best information I've seen is from the Model A clubs. Those guys really get in there and do their research.

Its the weekend, time to get greasy...

I have an engine knock on my 22T- so I pulled each plug wires individually and seems like its coming from No. 1. So, I pulled the pan and I'm using plastigague to check the clearance. First pass came with no deformation at all, so I know the gap is greater than 0.003 in.

I measured the shims and they were...

Over the years I think I've probably tried all the available radiator flushes. Even CLR, but now the instructions on CLR say not for cooling systems. What is the best one for a Model T?

Cleaning out some coffee cans and have multiple matched sets of the threaded Timken's available - clean & ready to grease - photos coming soon - $100 pair includes Priority Mail in the U.S. Drop me a note through the Forum, please.

Pending sold to RK
4 as pictured
$5.00 each or all 4 for for $15 plus shipping.

I’d like to trade these low hood (17-22) hood shelves for a pair the later high hood (23-25) style. Looking for a nice set in similar condition to the ones I have. Not looking to sell, would really like to trade for the correct ones I need. I bought these at a swap meet thinking they were correct for my project but later realized they are not....

As some chapter's get smaller due to members dying off, has any chapter ever considered joining up with a Model A chapter? You could have a joint newsletter. Combine costs of meetings. Have bigger tours. Have more people available to work on cars. etc.

Would it even be allowed? Ins issues, etc. Just sitting here thinking outloud.

Pending sold to Richard K

Have 3 $5.00 each or all 3 for $10.
All prices plus shipping cost. 3din.jpg
3dout.jpg
D1a.jpg
D1a.jpg

Does anyone have the instructions for a Schlaich Lock made for Motometers? The way they work is seemingly obvious but I am hunting for the original instructions just for reference.

Are you permitted to drive your own T in Greenfield Village? Is that only during the once a year festival parade? Where do I find the details?

New spinning for Brown 75 and Possibly 78 tail lamp Red Lense. Originally lenses were spun in place and the rim often split. These have the retaining rim spun and the lense is installed from the inside and epoxied in place . $83 each plus postage Larry Debaugh 4103361728 IMG_8382.jpeg IMG_8381.jpeg IMG_8383.jpeg IMG_8381.jpeg

It's September 6. Guess we'll get it rolling.
We had a terrible Spring.  We had to ask a tenant to leave who had issues paying their rent and when they left, their unit was trashed.  It took us close to 4 months to make it rentable again.  This made it so our first ride of the Summer took place today, Sept. 6.  After some gussying up, it was a...

Original Samson Lion Hand Operated mechanical Ahooga Horn. Excellent condition. Nice nickel plating (not chrome)on bell, some very minor age patina, no dents. Push plunger to operate. Very loud, ready to mount and use. Nice era correct horn. 9.5 length, 5 inch diameter bell. 200 includes shipping.

IMG_1638.jpeg IMG_3487.jpeg

Howdy, I’m looking for a nice set of 1911-12 running boards, or simply a passenger/right side, if that’s all I can find

Thanks MTFCA

FS: One restorable Jno. Brown 110 lantern. It will need a total restoration, the burner is missing, there's a dent in the back, the reflector plating has worn off, and the glass will have to be replaced. On the plus side, the top, while not perfect, is better than probably 80% of the Jno. Brown lights I've seen. Also includes a fount that is not...

Here is an extra to me TA14/15 mic for sale. This is a direct read mic, no math to do with it. Range is 1.2 inches to 3.4 inches.
It is made by some small company in MA. You may have heard of them Starrett. They made these just for Tobin Arp. It will work with any boring bar that is 1 1/8” dia. These were also for the SB,SBA and RA bearing...

Folks here is an opportunity to spread the word about an existing swap meet that wants to integrate a pre-war swap meet within their confines. It’s a very successful 19-year-old swap meet located in Duncan, Oklahoma. Please spread the word to friends and vendors about this meet. It’s located about 40 miles south of Chickasha, OK. If you are a...

For sale: alum S shaped intake $25 plus postage
20231224_143842.jpg

You see something online that you really want and someone beats you to it. Tonight, a missed a Simmons head on Facebook Marketplace. Someone say the ad before me and bought it for $50.00 ! Even if it was cracked and not repairable, I would have taken a chance for that.

Went to the local Fleet Farm today to get oil. Everything was synthetic or partial synthetic. I finally found 2 boxes of conventional 10w-30 oil and bought both. I do not like synthetic oil in my T. It seems to leak more. Is the conventional being discontinued? Thoughts?

for sale: transmission cover door, good condition $30 plus postage
20220616_125511.jpg

For sale: Wood hubs and flange. good condition $250 plus postage
20220704_113710.jpg

For sale: tail oil lamp and license bracket 15-19 $30 each plus postage
20240614_101555 - Copy.jpg

20220624_171643.jpg
For sale: Fan bracket #T604 with Ford script $30 plus postage

11 tooth pinion with Ford script $100

For sale: a pair of brake shoes $50 plus shipping
20220913_154853.jpg

For sale: Ford script head with made in USA $100 plus shipping 20240507_155020.jpg

By chance are there any members selling Model T parts at the Cowtown Farmers market in Pilesgrove, New Jersey?

Q&A videos seem to be all the rage on people's YouTube channels right now, so I thought I'd try a slice of the pie, with a Model T flavor!
After trawling through some of the comments on my channel, I've whittled them down to 15 questions and put them into a video for you all.
If you have any comments or questions you'd like to ask and possibly...

A few months ago I traded my 25 year old Dodge in for a 4 year old Ford Escape, one with only 3 cylinders. Little did I know I would soon have another 3 cylinder Ford, this time the 1914 Touring.

After trying many things, going back to basics, switching things around, testing this and prodding that I finally made some progress. A suggestion off...

WTB: 1919-1921 Coupe with a pickup bed instead of the turtle deck. Running and drivable. Not interested in a Roadster pickup. 1919-1921 Coupe with turtle deck will be considered. (Am posting for a neighbor who does not have internet.) All leads are appreciated. Please send pictures via PM messaging. Thank you.

I am getting ready to mount my turtledeck onto the roadster bed behind the seat bucket. Should I put a layer of felt paper (maybe felt roofing paper) under the turtledeck? What was used originally if anything?
Thank you,
Craig

Kind of grainy looking.

Hello everyone, I recently went through my front axle and refreshed everything up: new tie rod bolts, spindle bolts, bushings, some ball joint shims (car already had some, I only replaced them and didn't add more), wheel bearings, the works. Didn't replace any large parts (e.g. tie rods, pitman arm), just cleaned up what was on there. During the...

This came in mail today!!!! Little over 4 weeks away.
Got to load trailer. Wondering what to take this year.
IMG_4009.jpeg

Stay tuned to this channel for updates. Dan

I have this mid-teens(?) Holley G on a spare engine that apparently powered a saw bench way back when.

My 98-year-old Model T friend was over the other day and opined that it was a desirable unit for my newly-rebuilt '26 Touring engine (Z head, bigger valves, advanced timing gear, TW timer, well-balanced, hi vol intake manifold).

I read up a bit...

IMG_7672.jpeg IMG_7614.jpeg IMG_7660.jpeg IMG_7650.jpeg

Is it a 1926 Tourer?

IMG_1628.jpg IMG_1627.jpg IMG_1632.jpg
I have a Muncie transmission case and a Warford case with a pile of parts, all $150 plus shipping. tim 21303.jpg

A friend of mine who is new to Model T-s could benefit from Milt Webbs book………I can’t find one on EBay for him…..Thanks!

When did Ford change the design of the grease cups from the early style to the later style used until the end?

Checking to see if we have Model T guys close to Spring Texas?

Thanks

IMG_5983.png I have a 1918 Model T Couplet removable post car for sale. It’s a very rare car that needs to be saved. There are less than 20 left in the world. No motor, but included are window frames, door latches, doors and truck lid, cowl light brackets, seat springs that were copied from an original car, upholstery cloth ( 9 1/2 yards), splash...

Fall is here. Time to cram in every touring opportunity. So yesterday the wife and I decided it was time to give Stanley our '26 Fordor some exercise. Nice drive around the country and went to Huron, next town over to to go walk their pier. You can barely see the lighthouse in upper right FAR background!
I grew up in this area as a kid and...

I would like to purchase either outright or with core exchange if needed, one serviceable Sediment Bulb for 1924. This would be part number 2902B. The handle must turn and not leak. Thanks. Please email to Danielsnell2@twc.com with photos.

24 coupe I dont know how to identify the carb for you guys but i assume its standard.. when i turn on the fuel petcock and allow fuel to flow into the carburetor, it starts leaking (with the engine not running) and drips once every four seconds. i think the leak is coming out of the air intake area but its hard to tell as there is one of those...

One aluminum step plate.
Comes with hardware.
Just install.

15.00 plus shipping.

Please text Brooks @ six zero 9,
9 two 0, 4 2 two zero.

Many thanks!

IMG_1782.jpeg IMG_1822.jpeg IMG_1841.jpeg IMG_1820.jpeg

Any reason to save heavy rods? Just stripped down another engine with a set in it . Got at least a bucket full.

Hi all, I have a roadster body in the San Diego area I need to have shipped to Northern California. I'm about an hour north of Sacramento, but I can drive and meet someone along the way. I-5, I-80..or 395 on the eastern side of the Sierra mts.
Glad to pay for your time and fuel.
Any help appreciated.
Thanks , Michael
Seven zero seven 486-8420

I am selling our 1915 Touring car due to inability to figure out how to drive it without killing myself and everyone who's in it with me. Actually, two knee replacements and big feet are the problem. The car is in our garage in Upland Ca. It's an amazing car. Rajo head. model A crank, custom header, completely rebuilt 1926 engine and trans by Eric...

Does anybody have just one NOS narrow cotton band liner? My brake band is toast, but the 1 and reverse bands are in great shape, and I really would rather not have to switch the transmission over to kevlar or wood.

Thanks for your consideration.

Bob
rschroen_61@yahoo.com

Reproduction 1912-13 slant top wooden coilbox. This coilbox is designed to hold the common later coils. It has a nice original 1913 KW switch, new faceplate, and new copper contacts, posts and insulators. New solid core wiring. It comes with two options for mounts, the installed and easily removed mounts that use 1/4 thread studs, and a pair of...

For Sale original iron sediment bowl. Bowl has a good screen and new lead washer. Bowl was disassembled, bead Blasted, and painted. Handle is marked Ford and was assembled with EZ TURN gas resistance grease (also drain valve). All parts have good threads. Price $100 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For Sale is a 1914 Roadster. This is an older restoration of an original vehicle. Since I have owned it, I have made a few repairs to the car. I installed safety glass for the windshield, rebuilt 3 wheels, installed new top and made a few adjustments. The car runs well. The new wood for the body was installed by Ray Wells. There are a few...

Grandparent's Day at the Model T Museum is a great time to bring the young folks in your life for a visit. In addition to the usual interactive displays and learning opportunities, we will also have special crafts and activities for kids that day from 11 - 2.

Round up the neighborhood kids and bring 'em all along in your Model T and let us...

Does anybody know who makes the pedal extensions for the clutch and brake pedals?

Part no. 3539C that attaches steering column to chassis rail. Will be made as mirror image of standard unit.
Most likely to surface in Australia, U.K., New Zealand or Argentina right hand drive markets ?
I could actually make use of 2 of them.

Sounds weird, but I need a scrap of old leatherette to patch a hole in the original upholstery on my 1916T. I know most people toss the old upholstery when replacing it, but you never know with T people: someone out there is bound to have some aged leatherette laying around!

I am looking for a Texas T/Bird Haven add on alternator kit, or at least the bracket for my 1918 touring. Please let me know if you have one to sell or at least a bracket to borrow so I can get one made. I called, they don't have em.

I was going to drive modern to the Old Car Festival but fate intervened. Yesterday I hit a curb that flattened two tires and bent the wheels. After a night in the hospital for observation, I'm home now. The docs think dehydration combined with too much blood pressure medicine and affected my driving. I will miss seeing old cars and old friends,...

May 28th

Leaving Mt. Pleasant, South Carolina
Headed to Earlville, Illinois

Room for a Model T or
other items in my enclosed trailer

Here is my route

IMG_5935.jpeg

Call or Text

FreighTer Jim
260-804-6695

****************************************

Google “ Model T Transport … 💡

E505186B-2C58-45A3-91E4-3B581F52056E.jpeg

You...