MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 248 matches

Topics

Replies

Views

Last post

Rebuilding Model T coils

Last post by johnernst « Thu Aug 11, 2022 5:10 pm
Posted in General Discussion Forum (started 2019)
Replies: 2
by johnernst » Thu Aug 11, 2022 4:45 pm » in General Discussion Forum (started 2019)

First post

I dont know too much about Model T coils but from what I understand when checking a coil and you find the primary or secondary windings are damaged that the coil is not rebuildable.
I noticed that Snyders and Langs and maybe others sell the secondary and primary windings. Does this mean I can use these to rebuild those non-rebuildable coils ?...

Last post

I suppose its simply cost prohibitive when you can find one with these windings intact and therefore only have to replace the capacitor.

John

2 Replies

23 Views

Last post by johnernst
Thu Aug 11, 2022 5:10 pm
FS Fan Bracket/Cylinder Head Water Upper Outlet

Last post by vwmarc « Thu Aug 11, 2022 5:04 pm
Posted in Classifieds - Parts
Replies: 1
by Horsehead » Thu Aug 11, 2022 4:38 pm » in Classifieds - Parts

First post

For 1926 and 27 T's. New item never used.
Bronze casting includes the outlet, eccentric and the eccentric plate.
Also includes new gasket, new hose clamp and new fan shaft.
$75 check or Paypal. Free shipping within the US only.
Weighs 2 pounds, 14 ounces.

Last post

I will take it! Thanks.

1 Replies

15 Views

Last post by vwmarc
Thu Aug 11, 2022 5:04 pm
FS Transmission Brake Drum

Last post by Horsehead « Thu Aug 11, 2022 4:48 pm
Posted in Classifieds - Parts

by Horsehead » Thu Aug 11, 2022 4:48 pm » in Classifieds - Parts

With shaft, bushings and tight rivets. No cracks or pitting.
Light surface rust and blemishes. Uses 26-27 lug shoes (not included).
Ford script. Six pounds, seven ounces.
$175 and free shipping in the US only.
Check or Paypal.
Thanks

0 Replies

8 Views

Last post by Horsehead
Thu Aug 11, 2022 4:48 pm
FS Transmission Brake Drum

Last post by Horsehead « Thu Aug 11, 2022 4:45 pm
Posted in Classifieds - Parts

by Horsehead » Thu Aug 11, 2022 4:45 pm » in Classifieds - Parts

With shaft, bushings and tight rivets. No cracks or pitting.
Light surface rust and blemishes. Uses 26-27 lug shoes (not included).
Ford script and made in Canada. Six pounds, seven ounces.
$175 and free shipping in the US only.
Check or Paypal.
Thanks

0 Replies

6 Views

Last post by Horsehead
Thu Aug 11, 2022 4:45 pm
New headgaskets

Last post by CudaMan « Thu Aug 11, 2022 4:40 pm
Posted in General Discussion Forum (started 2019)
Replies: 53
by Norman Kling » Sun Jun 19, 2022 7:25 pm » in General Discussion Forum (started 2019)

First post

Does anyone know whether new headgaskets are available now?
Norm

Last post

IMO, It's hard to believe that a modern head gasket design made to withstand 4X the combustion pressure and a cooling system pressurized to 16 psi can't hold up to Model T use.

53 Replies

4267 Views

Last post by CudaMan
Thu Aug 11, 2022 4:40 pm
Adjusting buzzer coils

Last post by johnernst « Thu Aug 11, 2022 4:39 pm
Posted in General Discussion Forum (started 2019)
Replies: 58
by rainer » Thu Dec 16, 2021 11:48 am » in General Discussion Forum (started 2019)

First post

I have seen a very interesting device for adjusting buzzer coils, the ECCT tool.

Nice, but for my taste this is a little bit too pricy. I will not pay 400-500$ for such thing when I need it possibly 1 time a year.

So I will try to do it in old way , by measuring the drawn current and setting it to approx 1.5 Amps. I also plan to build a little...

Last post

Does anyone know how to obtain a Strobospark coil tester ? I understand these were made by Fun Projects and they were bought out by Birdhaven which is now owned by Texas T parts. Are these still being made or do i have to find a used one for sale?

Regards
John Ernst
Edmonton, Alberta, Canada

58 Replies

3048 Views

Last post by johnernst
Thu Aug 11, 2022 4:39 pm
T engine rebuilder

Last post by JTT3 « Thu Aug 11, 2022 4:37 pm
Posted in General Discussion Forum (started 2019)
Replies: 4
by Phillip » Thu Aug 11, 2022 3:08 pm » in General Discussion Forum (started 2019)

First post

Can anyone tell me anything about Lilleker Antique Auto Restorations? I am thinking about taking my T engine to them to get a complete rebuild.

Thanks

Last post

Phillip have you considered Brent? Good guy very knowledgeable, sharp and a lot of experience with building engines. He is located in Tn. Ross is also a friend and I personally have used him. Brent however is closer than Ross. All things being equal makes sense to me. Best John

4 Replies

56 Views

Last post by JTT3
Thu Aug 11, 2022 4:37 pm
How do YOU measure Hyatt bearings for tolerance

Last post by Mark Gregush « Thu Aug 11, 2022 4:34 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by JTT3 » Wed Aug 10, 2022 5:38 pm » in General Discussion Forum (started 2019)

First post

Sitting here starting the process of measuring 8 bearings & checking for taper using 3 different points. I decide to procrastinate and started thinking there has to be a better way. Is there? Love to hear your best practice? I’ve gone as far as using a bar at standard 1.062 to see the height of the rollers above the cage.

Last post

I am of the opinion, that many people try and set up the gear mesh too tight for how the rear end is designed. Even with good roller bearings and sleeves, there is still a lot of play for trying to get tight fits. The Model A is .015-.018 for ring gear to pinion.

12 Replies

350 Views

Last post by Mark Gregush
Thu Aug 11, 2022 4:34 pm
FS Schrader and Dill Dust Covers and Gauges

Last post by CudaMan « Thu Aug 11, 2022 4:34 pm
Posted in Classifieds - Parts
Replies: 1
by Horsehead » Thu Aug 11, 2022 3:32 pm » in Classifieds - Parts

First post

FIVE vintage Dill valve covers and ONE Dill pressure gauge.
FIVE vintage Schrader nickel era wire wheel dust covers.
SIX vintage Schrader pressure gauges. One has a Fisk Tire advertisement on it. The others are for local businesses across the US (e.g., hardware stores and auto parts suppliers).
NOTE: The two leather holders in the Schrader pic...

Last post

It's amazing how many people back in the day saved the shiny bits (dust covers, rim nuts) and threw the metal stems away!

It is much harder to find the correct stems than it is the other parts. :)

1 Replies

42 Views

Last post by CudaMan
Thu Aug 11, 2022 4:34 pm
ID Spark Plug Use

Last post by CudaMan « Thu Aug 11, 2022 4:32 pm
Posted in OT - Off topic
Replies: 1
by Harry Lillo » Thu Aug 11, 2022 4:03 pm » in OT - Off topic

First post

I have quite a number of old ( 1950's and 60'S ) spark plugs in original packaging and
in most cases original boxes. They are mostly Champion and AC.
While the boxes and plugs are marked with numbers and letters I would like to know their
various application (vehicles which use them).
I have identified the Champion A25's and X cores but the rest...

Last post

Not a reverse chart, but here is what I have:

1 Replies

7 Views

Last post by CudaMan
Thu Aug 11, 2022 4:32 pm
American Bosch front plate distributor information

Last post by Mark Gregush « Thu Aug 11, 2022 4:28 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Bryant » Thu Aug 11, 2022 1:00 pm » in General Discussion Forum (started 2019)

First post

Iam looking for any information related to the American Bosch front plate distributor. Parts books, installation information and the like. 48CD81C0-7475-4D03-BA7A-8D5FB5EFA56F.jpeg this is a type T448 that I have obtained. Any help is much appreciated.
Bryant

Last post

Check Chaffin's online catalog. The make some of the replacement parts for them. Don't think they have any parts for the original distributor, just the other parts.

5 Replies

46 Views

Last post by Mark Gregush
Thu Aug 11, 2022 4:28 pm
FS Box of Ten Champion C-7 Spark Plugs

Last post by Horsehead « Thu Aug 11, 2022 4:20 pm
Posted in Classifieds - Parts

by Horsehead » Thu Aug 11, 2022 4:20 pm » in Classifieds - Parts

Box of TEN NOS Champion C-7 Spark Plugs. Never used. See pics.

Not for Model T's, but used on 1930's era Auburns, American Bantam, Cadillac, Chevy, Chrysler, Continental, Cord, Desoto, Essex, Franklin, Grahm, Hudson, Peerless, NASH, Marmon, Durant, LaSalle, Hupmobile, Plymouth, REO, Roosevelt, Rolls Royce, Rockne, Ruxton and Viking to name a...

0 Replies

20 Views

Last post by Horsehead
Thu Aug 11, 2022 4:20 pm
Motor home model T

Last post by FreighTer Jim « Thu Aug 11, 2022 4:12 pm
Posted in General Discussion Forum (started 2019)
Replies: 10
by Rich P. Bingham » Wed Aug 10, 2022 3:26 pm » in General Discussion Forum (started 2019)

First post

This has probably been posted before, but it's worth the look. It just makes me happy to look at it ! No date, place or comments with the photo.

Last post

“ Housecar “ or “ House Car “ is the correct term.

Some states still have the term as a motor vehicle
classification for title & registration purposes.

Practical examples that were actually used were
often hand built by a cabinet maker usually on
a one ton truck chassis.

Then trips were attempted that often failed.

Our one ton 1925 Chevrolet...

10 Replies

409 Views

Last post by FreighTer Jim
Thu Aug 11, 2022 4:12 pm
FS Headlight Wires and Timken Cups

Last post by Horsehead « Thu Aug 11, 2022 4:03 pm
Posted in Classifieds - Parts
Replies: 2
by Horsehead » Thu Aug 11, 2022 3:12 pm » in Classifieds - Parts

First post

One new headlight wiring harness for 1926-27 (T- 5041-E)
Two new Timken (T-2836) Front Outer Cups for 1909-27
One new Timken (T-2833) Front Inner Cup for 1909-27
One new piece of wood hand carved by Henry Ford II while at a LeMans race (the famous one in the movie).
$50 for all with free shipping in the US only.
Paypal or check please.
Send a PM....

Last post

Sold pending payment. Thanks, MTFCA.

2 Replies

49 Views

Last post by Horsehead
Thu Aug 11, 2022 4:03 pm
FS—->. Brass Speedometer Bracket

Last post by Runabout « Thu Aug 11, 2022 3:53 pm
Posted in Classifieds - Parts
Replies: 2
by Runabout » Thu Aug 11, 2022 8:51 am » in Classifieds - Parts

First post

Brass Speedometer Bracket. For Stewart, Jones, ect…. $140 to your door in the lower 48 states.
423-2eight4-97fifty. Text or call. Thanks.
A8E3F816-BC83-440B-A916-871C73C63E7A.jpeg 1ABB4AEF-363C-4F8C-84E5-600C488208E2.jpeg EC9AD7FC-0582-4AD9-AB0F-E5940480064B.jpeg

Last post

Tom, it doesn’t have a left tilt. But if you aren’t apposed to adding a small wood wedge on the right side of the bracket to match your firewall it could easily be made to be seen easy by the driver.

2 Replies

128 Views

Last post by Runabout
Thu Aug 11, 2022 3:53 pm
FS Water Pump

Last post by Horsehead « Thu Aug 11, 2022 3:46 pm
Posted in Classifieds - Parts

by Horsehead » Thu Aug 11, 2022 3:46 pm » in Classifieds - Parts

Fits any T . Five years old and works without leaking. Removed from our 1926 Roadster.
Comes with new 36-inch VULCO 815 belt, two mounting bolts, water hose clamp and grease cup.
Weighs four pounds, three ounces.
$100 check or Paypal with free shipping.
Send PM
Thanks.

0 Replies

19 Views

Last post by Horsehead
Thu Aug 11, 2022 3:46 pm
Thinking about going to Hershey this year.

Last post by Quickm007 « Thu Aug 11, 2022 3:29 pm
Posted in General Discussion Forum (started 2019)
Replies: 26
by jwrightjr » Tue Aug 09, 2022 1:13 pm » in General Discussion Forum (started 2019)

First post

Like the subject says I am thinking about taking some time off this year and heading to Hershey. I have never been to the swap before and do have a few things I am looking for that I have not been able to come up with. Like a top for my 25 Roadster. Any tips from the Hershey pro's as to what days are best, where to stay or how much time to plan on...

Last post

Nice Picture! What time this year? We could set a time and have many folks possible... Just saying. :lol:

26 Replies

663 Views

Last post by Quickm007
Thu Aug 11, 2022 3:29 pm
Thanks Tim Morsher

Last post by TXGOAT2 « Thu Aug 11, 2022 3:20 pm
Posted in General Discussion Forum (started 2019)
Replies: 45
by GG Gregory » Sat Jul 30, 2022 12:09 pm » in General Discussion Forum (started 2019)

First post

I just gotta give a public praise to Tim for his help with sharing a out of stock item to me. I have also bought a few of his T accessories he makes and always comes through 100% ! Thanks Tim for your help !

Last post

Yep, da innernets... with the push of a button, I can instantly delete EVERYBODY! Heck, I can make a full color, full-screen image of the whole darned planet disappear. But where's the fun in that?

45 Replies

1985 Views

Last post by TXGOAT2
Thu Aug 11, 2022 3:20 pm
What have you done on an old non-Model T vehicle.

Last post by CudaMan « Thu Aug 11, 2022 2:55 pm
Posted in OT - Off topic
Replies: 210
by Rich Eagle » Mon Mar 25, 2019 11:38 am » in OT - Off topic
1

2

3
First post

It became important for me to do something with the 1919 Harley-Davidson engine. The bike has been gaining in value and parts since the acquisition of a basket case in 1973. A total rebuild isn't an option for me at this time but I believe I can reassemble it and at least get all the parts in one place and maybe fire it up. One of the crank pin...

Last post

Since the heat wave broke, a friend came down to visit and help with another test drive of my 1912 Flanders 20 Runabout. This time I leaned the carb out a bit and increased the base timing, the car seemed to like the changes.

The car now goes fast enough that I need to install some cushion material around the lamp lenses before they rattle...
210 Replies

58178 Views

Last post by CudaMan
Thu Aug 11, 2022 2:55 pm
FS Vinal Covered Seat Springs

Last post by fordzzz « Thu Aug 11, 2022 2:47 pm
Posted in Classifieds - Parts

by fordzzz » Thu Aug 11, 2022 2:47 pm » in Classifieds - Parts

Black vinyl covered seat springs out of a early unknown vehicle. Bottom spring is 34-37 inches wide 17 inches deep and 6 inches tall. Back is foam, 41-45 inches wide 22 inches high and 5 inches tall. Ten dollars each plus actual shipping cost.
Apparently I can not get pictures on here so please email for photos or a response
petersoldcars@gmail.com

0 Replies

42 Views

Last post by fordzzz
Thu Aug 11, 2022 2:47 pm
Rim Nuts

Last post by CudaMan « Thu Aug 11, 2022 2:47 pm
Posted in General Discussion Forum (started 2019)
Replies: 2
by Original Smith » Thu Aug 11, 2022 1:56 pm » in General Discussion Forum (started 2019)

First post

If you are looking for the proper round brass rim nuts for your brass T, contact Dan Mc Eachern in Alameda, California. He made new ones from a mint original I had, but hasn't advertised them. He gets $20 each for them, and they are perfect. If you have doubts about what I have to say, check the latest edition of the Model T Judging guidelines...

Last post

I bought some of them for my 1912 Flanders, they are excellent! :)

2 Replies

63 Views

Last post by CudaMan
Thu Aug 11, 2022 2:47 pm
Different T Things

Last post by Nathan Pederson « Thu Aug 11, 2022 2:30 pm
Posted in General Discussion Forum (started 2019)
Replies: 56
by Nathan Pederson » Wed Dec 15, 2021 7:47 am » in General Discussion Forum (started 2019)

First post

Hello fellow T'ers,
Will be posting some miscellaneous T pictures. Start with this one:

U Joint.jpg

Last post

Steve according to the definition mine definitely is not a meme :lol:

56 Replies

5707 Views

Last post by Nathan Pederson
Thu Aug 11, 2022 2:30 pm
Rim Nuts

Last post by Steve Jelf « Thu Aug 11, 2022 2:30 pm
Posted in General Discussion Forum (started 2019)
Replies: 2
by Original Smith » Thu Aug 11, 2022 1:56 pm » in General Discussion Forum (started 2019)

First post

If you are looking for the proper round brass rim nuts for your brass T, contact Dan Mc Eachern in Alameda, California. He made new ones from a mint original I had, but hasn't advertised them. He gets $20 each for them, and they are perfect. If you have doubts about what I have to say, check the latest edition of the Model T Judging guidelines...

Last post

You can delete this one. Click on the pencil, check Delete at the bottom of the page, and hit Submit.

2 Replies

46 Views

Last post by Steve Jelf
Thu Aug 11, 2022 2:30 pm
1914 T Speedometer parts wanted

Last post by Original Smith « Thu Aug 11, 2022 1:52 pm
Posted in General Discussion Forum (started 2019)
Replies: 8
by Bruce Compton » Tue Aug 09, 2022 12:21 pm » in General Discussion Forum (started 2019)

First post

I'm trying to get parts to install a speedo on my '14. I have a decent looking Standard Speedometer head but it has no main input drive, I already have a nice correct cable, a nice 2.5:1 swivel and the correct steering arm with the hole for the mount. I'm confused as to the correct swivel drive ratio for the Standard , (either 2.5:1 or 1:1 ). I...

Last post

I'm sure Russ will agree with me on this one, but only the late 1914 models used the new 1-1 speedometers.

8 Replies

302 Views

Last post by Original Smith
Thu Aug 11, 2022 1:52 pm
Carburetor assembly: The Hard Part. Help!

Last post by Original Smith « Thu Aug 11, 2022 1:49 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by Steve Jelf » Wed Aug 10, 2022 10:52 pm » in General Discussion Forum (started 2019)

First post

Most of the steps in assembling a carburetor range from easy to super-easy. But I have always found lining up the holes in the throttle shaft and plate another story. You can see by the pliers marks on this plate that I've been struggling with it.

IMG_0693.JPG
On my own carb I don't care about the marks. As Dude Lester says, It don't hurt...

Last post

I've done this for years, and never had a problem. Find another piece of wire the same diameter and use that as a guide. I've also used a scribe to help me get started.

7 Replies

337 Views

Last post by Original Smith
Thu Aug 11, 2022 1:49 pm
Encyclopedia errors

Last post by Rich P. Bingham « Thu Aug 11, 2022 1:29 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by Steve Jelf » Thu Aug 11, 2022 1:16 am » in General Discussion Forum (started 2019)

First post

It's not just the spelling. The photo sure looks like G to me.

Screen Shot 2022-08-11 at 12.10.33 AM.png

Last post

Bery helpful information. Thanks to all who posted !

12 Replies

320 Views

Last post by Rich P. Bingham
Thu Aug 11, 2022 1:29 pm
Ohio to Florida

Last post by Steve Jelf « Thu Aug 11, 2022 1:26 pm
Posted in General Discussion Forum (started 2019)
Replies: 1
by Joe Bell » Thu Aug 11, 2022 1:21 pm » in General Discussion Forum (started 2019)

First post

I am heading to Florida in a couple weeks with 32 ft. enclosed trailer, heading there empty would be glad to haul something for the help of fuel? Joe Bell

Last post

Going to fetch a project? :)

1 Replies

50 Views

Last post by Steve Jelf
Thu Aug 11, 2022 1:26 pm
Bye!!!!!

Last post by Joe Bell « Thu Aug 11, 2022 1:19 pm
Posted in General Discussion Forum (started 2019)
Replies: 27
by Henry K. Lee » Tue Aug 09, 2022 7:10 pm » in General Discussion Forum (started 2019)

First post

This is my last writing on the forum, will not monitor or answer questions anymore, logging out!

Back to my SWAMP!,

Shrek

Last post

Glad to of met you in person and hope to see you at Luray next year!

27 Replies

1501 Views

Last post by Joe Bell
Thu Aug 11, 2022 1:19 pm
Another spare to carry

Last post by Steve Jelf « Thu Aug 11, 2022 1:09 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Steve Jelf » Wed Aug 10, 2022 11:53 pm » in General Discussion Forum (started 2019)

First post

Norm's latest adventure in What have you done... reminded me of driving down the street in a town two states from home and a couple of guys in the car next to me yelling that water was pouring out of my car. Fortunately the plug was leaking but not lost, and fixing the leak was easy. But if it had fallen out on the street it would have been a real...

Last post

I don't know if it was due to years of antifreeze or hot water, but old #2 definitely failed in that application for me.

Choosing among plugs is pretty easy. Steel will rust out, of course, while brass will not. But I think the nickel Norm suggested will last even better than brass. It's also cheaper, if that matters. It's what I use....

5 Replies

300 Views

Last post by Steve Jelf
Thu Aug 11, 2022 1:09 pm
Rajo #30 8 valve

Last post by ModelT46 « Thu Aug 11, 2022 1:09 pm
Posted in Classifieds - Parts
Replies: 1
by ModelT46 » Wed Aug 10, 2022 3:44 pm » in Classifieds - Parts

First post

-Is any one imnterested in this head? Pick up in Minnesota Twin Cities. Seeking best offer. has rest--rods, etc. no cover.

Last post

I will take a photo soon of the rest of the head parts )for the Rajo)

1 Replies

313 Views

Last post by ModelT46
Thu Aug 11, 2022 1:09 pm
For Sale 1929 Model AA Ford truck.

Last post by BobP « Thu Aug 11, 2022 12:41 pm
Posted in Classifieds - Vehicles
Replies: 20
by BobP » Mon Jul 11, 2022 9:36 pm » in Classifieds - Vehicles

First post

FS all original Model AA ford truck. It was used as a commercial garden truck. The body is in great condition, fenders are very good and straight. Had a valve job less than 20 miles ago. Never any rust. The patina is all real. The wood box is in very good shape. Tires have good thread, but older. It has good Mn. title in my name. It has writing on...

Last post

New Price, $7,900.

20 Replies

2304 Views

Last post by BobP
Thu Aug 11, 2022 12:41 pm
what have you done with your model T in August

Last post by ironhorse « Thu Aug 11, 2022 12:38 pm
Posted in General Discussion Forum (started 2019)
Replies: 29
by ironhorse » Tue Aug 02, 2022 7:30 pm » in General Discussion Forum (started 2019)

First post

Pressured washed the frame got 99&44/100% of the red clay off
as far as I can tell this is a piece of copper tubing used as a shim for worn brake pivots.
DSC_0173.JPG
same for other side
DSC_0173.JPG
this area seems to be bent
DSC_0171.JPG
better view
DSC_0172.JPG
well as straight as I could get it.

Last post

Steve the CLR worked good on the fuel screen
DSC_0191.JPG
So it is back together now and it doesn't leak
DSC_0192.JPG

29 Replies

1851 Views

Last post by ironhorse
Thu Aug 11, 2022 12:38 pm
Brass headlight rims

Last post by Melba Nolan « Thu Aug 11, 2022 12:17 pm
Posted in Classifieds - Parts

by Melba Nolan » Thu Aug 11, 2022 12:17 pm » in Classifieds - Parts

FOR SALE: heavy solid brass headlight rims no cracks. $100 each 15/16
inside diameter is 8 15\16
20220811_110735.jpg 20220811_110800.jpg

0 Replies

77 Views

Last post by Melba Nolan
Thu Aug 11, 2022 12:17 pm
Brake levers

Last post by Mark Gregush « Thu Aug 11, 2022 12:04 pm
Posted in Classifieds - Parts
Replies: 1
by OldFordGuyDan » Thu Aug 11, 2022 8:13 am » in Classifieds - Parts

First post

WTB 26/27 emergency brake cam levers. 217-649-0724

Last post

Please use the edit button and put wanted in your title. (the pencil thing)

1 Replies

113 Views

Last post by Mark Gregush
Thu Aug 11, 2022 12:04 pm
door latch

Last post by Melba Nolan « Thu Aug 11, 2022 11:59 am
Posted in Classifieds - Parts

by Melba Nolan » Thu Aug 11, 2022 11:59 am » in Classifieds - Parts

FOR SALE: roadster door latch $25 plus postage
20220811_104255.jpg 20220811_104315.jpg 20220811_104350.jpg

0 Replies

43 Views

Last post by Melba Nolan
Thu Aug 11, 2022 11:59 am
FS MISCELLANEOUS

Last post by MAG « Thu Aug 11, 2022 11:04 am
Posted in Classifieds - Parts
Replies: 7
by Mark Chaffin » Wed Aug 03, 2022 9:26 pm » in Classifieds - Parts

First post

Prices are as indicated below. Shipping is an additional $9.50. Combine items and save on shipping if they fit in the same box. Mark Chaffin (951) 805-0928

20220803_175536.jpg
Early front motor mount excellent condition $50.00 SOLD

20220803_175237.jpg
Early timing cover (12-14) $50.00

20220803_175057.jpg
Ton truck rear spring perch set...

Last post

Sent email

7 Replies

800 Views

Last post by MAG
Thu Aug 11, 2022 11:04 am
Tire Flaps

Last post by Mark Gregush « Thu Aug 11, 2022 10:53 am
Posted in General Discussion Forum (started 2019)
Replies: 27
by m_p_dean@yahoo.com » Sun Jul 10, 2022 7:19 pm » in General Discussion Forum (started 2019)

First post

I've got a '17 touring with 30x3 1/2 clincher wheels front and back. It got time to replace tires. Not knowing the history on the existing tires, I wanted to go with new tubes, and flaps. Once I peeled off the old tires and tubes I could see the advantage of flaps, as the old tubes had patches and chaffing on the inside (rim contact) area, the...

Last post

I use flaps on mine, for no other reason then, the tubes I have been getting are smaller than they should be. Have a devil of a time keeping the tube stuffed in the tire while trying to mount them. For some of us that still working with tires more than a few years old and have to fight them on the rim, flaps protect the tubes from the tire irons...

27 Replies

1218 Views

Last post by Mark Gregush
Thu Aug 11, 2022 10:53 am
Frontenac Exhaust manifold advice needed

Last post by Ron Patterson « Thu Aug 11, 2022 10:24 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by KWTownsend » Mon Aug 08, 2022 6:48 pm » in General Discussion Forum (started 2019)

First post

Crunch. Ouch.

Exhaust Manifold broken.jpg

Many, many bad word were said.

This Frontenac exhaust manifold had been repaired (at least) once before and the flanges were so thin, spacers were needed for the manifold to clear the hogshead. There is no marking on the head, but the combustion chamber measurement indicates it is a Model T....

Last post

Keith
The manifold pictured in your original post can be properly repaired, but it'll cost ya.
There is a firm in Stafford Virginia named Casting Salvage Technologies who specialize in casting repairs and stabilization.
Several years ago I found an HCCT that had been dropped off a bench and was broken in two pieces right through the main frame...

11 Replies

566 Views

Last post by Ron Patterson
Thu Aug 11, 2022 10:24 am
F-S 1923 Model T TT Ford Dump Truck been in family since 1969

Last post by FATMAN « Thu Aug 11, 2022 10:05 am
Posted in Classifieds - Vehicles
Replies: 10
by FATMAN » Sun Aug 07, 2022 11:57 am » in Classifieds - Vehicles

First post

This is a very cool truck
has the cool type of hoist for the dump. the family owned it since 1969 and was a driver, parades, trips to town and fairs, the owner parked it in 2000 when his wife became ill, then he became ill and it sat. the family sold me this plus another chassis from the estate, clear title with truck
I do not know the brand of...

Last post

Sold on t bay, thank you forum

10 Replies

789 Views

Last post by FATMAN
Thu Aug 11, 2022 10:05 am
11 tooth pinion gear new price

Last post by Michael Davis « Thu Aug 11, 2022 9:25 am
Posted in Classifieds - Parts
Replies: 2
by Michael Davis » Fri Jul 22, 2022 5:30 pm » in Classifieds - Parts

First post

Nice 11 tooth pinion gear. $40.00 plus 8.00 shipping.

Email me
Rustrodsrule@yahoo.com
Thanks Mike

Last post

back to the top

2 Replies

326 Views

Last post by Michael Davis
Thu Aug 11, 2022 9:25 am
40 tooth ring gear new price

Last post by Michael Davis « Thu Aug 11, 2022 9:24 am
Posted in Classifieds - Parts
Replies: 2
by Michael Davis » Fri Jul 22, 2022 5:15 pm » in Classifieds - Parts

First post

Nice 40 tooth ring gear.$40.00 plus $16.00 shipping

Please email me
Rustrodsrule@yahoo.com

Thanks
Mike

Last post

back to the top

2 Replies

307 Views

Last post by Michael Davis
Thu Aug 11, 2022 9:24 am
Restoring Door Hinges for mid-years Open Cars

Last post by TXGOAT2 « Thu Aug 11, 2022 9:20 am
Posted in General Discussion Forum (started 2019)
Replies: 5
by BRENT in 10-uh-C » Thu Aug 11, 2022 8:18 am » in General Discussion Forum (started 2019)

First post

I am about to embark onto repairing the door hinge pins on a 1914 Runabout and am curious if anyone has done this and would be willing to share their experiences.

Since the hinge pins are 'killed' on the one I am working on, I think my initial thoughts are to align the two pieces the best I can and then put a tack-weld onto the hinge loops to...

Last post

Worn hinges can be a source of annoying noises.

5 Replies

87 Views

Last post by TXGOAT2
Thu Aug 11, 2022 9:20 am
Aluminum transmission cover (hogs head)

Last post by Melba Nolan « Thu Aug 11, 2022 9:15 am
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Sat Aug 06, 2022 10:25 am » in Classifieds - Parts

First post

For Sale: 1913 aluminum hogs head with pedals $350 plus postage
Has FORD script cover and clutch release ring
20220805_202522.jpg 20220805_202744.jpg 20220805_202541.jpg

Last post

move to top

2 Replies

356 Views

Last post by Melba Nolan
Thu Aug 11, 2022 9:15 am
Brake levers

Last post by OldFordGuyDan « Thu Aug 11, 2022 8:12 am
Posted in Classifieds - Parts

by OldFordGuyDan » Thu Aug 11, 2022 8:12 am » in Classifieds - Parts

WTB 26/27 emergency brake cam levers. 217-649-0724

0 Replies

53 Views

Last post by OldFordGuyDan
Thu Aug 11, 2022 8:12 am
1917 Model T Hub & Wheel Questions

Last post by Wayne Sheldon « Thu Aug 11, 2022 2:13 am
Posted in General Discussion Forum (started 2019)
Replies: 9
by gmarti86 » Tue Aug 09, 2022 3:45 pm » in General Discussion Forum (started 2019)

First post

Hi all, I’m trying to scour the internet for information on what the correct wheels would be for an early 1917 (Feb 1917). My car currently has square felloe and pointed spokes on 3-of-4 wheels, and one of the rears is a rounded felloe with rounded spokes. From best I can tell from Ford archives, square felloe wheels didn’t come in until late...

Last post

Final opinion first. Your square felloe wheel was most likely changed onto the car at some point in the past. I haven't seen anything that makes me believe that square felloes were used before mid to late 1917 model year (maybe about June 1917?). So your February 1917 should have the earlier style.
This is one of those changes that apparently had...

9 Replies

307 Views

Last post by Wayne Sheldon
Thu Aug 11, 2022 2:13 am
26-26 top iron fabrication

Last post by JTT3 « Thu Aug 11, 2022 1:59 am
Posted in General Discussion Forum (started 2019)
Replies: 1
by fordt » Wed Aug 10, 2022 4:00 pm » in General Discussion Forum (started 2019)

First post

Howdy all, I’m fabricating the “third member” top iron (the one that attaches to the windshield) for my 26 RPU and have acquired some older top irons that I’ve bead blasted and will start hacking on to make these two pieces. I’m going by the measurements of the photo here showing these irons to be 29” long and figuring that this is a total length...

Last post

Should go through both and peened over

1 Replies

149 Views

Last post by JTT3
Thu Aug 11, 2022 1:59 am
FOE option

Last post by Mark Gregush « Thu Aug 11, 2022 1:52 am
Posted in Forum Support Questions
Replies: 1
by speedytinc » Tue Aug 09, 2022 3:47 pm » in Forum Support Questions

First post

I would appreciate all there is to know about this option. How does it work? How to initiate. How to find info on this.
Thanks - john

Last post

Please spell it out, many me included, don't know what FOE is. Could be Fraternal Order of Eagles or Forge of Empire.

1 Replies

45 Views

Last post by Mark Gregush
Thu Aug 11, 2022 1:52 am
WTB bendix drive

Last post by Mark Chaffin « Thu Aug 11, 2022 1:00 am
Posted in Classifieds - Parts
Replies: 1
by RichJ » Thu Aug 11, 2022 12:37 am » in Classifieds - Parts

First post

In good condition.
Rich 561 262 039 three.

Last post

This one is available $40.00. Just needs the drive head an mounting bolts.

Screenshot_20220810-215722_Chrome.jpg

1 Replies

79 Views

Last post by Mark Chaffin
Thu Aug 11, 2022 1:00 am
RUCKSTELL SHIFT LEVER

Last post by Mark Chaffin « Thu Aug 11, 2022 12:32 am
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Wed Aug 10, 2022 11:20 pm » in Classifieds - Parts

First post

Ruckstell shift lever. This one has the later spline on the arm and lever for additional adjustment options. Price is $175 plus domestic shipping. Mark Chaffin (951) 805-0928

20220810_195033.jpg

Last post

It's not sloppy. I doubt the clearance between the shaft and support bracket are what you are asking for. After all, it is a used original shift lever.

2 Replies

182 Views

Last post by Mark Chaffin
Thu Aug 11, 2022 12:32 am
Battery carrier

Last post by Ken Buhler « Thu Aug 11, 2022 12:20 am
Posted in Classifieds - Parts
Replies: 10
by Melba Nolan » Mon May 23, 2022 7:06 pm » in Classifieds - Parts

First post

DSC00021.JPG DSC00020.JPG For sale. Battery carrier. Part #5150A as shown in Langs book. $40.00 plus freight.

Last post

And the bottom strap is worn through, which has to be replaced.

10 Replies

866 Views

Last post by Ken Buhler
Thu Aug 11, 2022 12:20 am
FS REAR HUB PULLER TON TRUCK

Last post by Mark Chaffin « Wed Aug 10, 2022 11:12 pm
Posted in Classifieds - Parts

by Mark Chaffin » Wed Aug 10, 2022 11:12 pm » in Classifieds - Parts

MOSCO Brand ton truck rear hub puller. Diameter is 2 3/8 . In great condition $60.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20220810_195217.jpg

20220810_195325.jpg

0 Replies

85 Views

Last post by Mark Chaffin
Wed Aug 10, 2022 11:12 pm
27 Coupe door glass install

Last post by BLB27 « Wed Aug 10, 2022 11:10 pm
Posted in General Discussion Forum (started 2019)
Replies: 10
by JoeG48 » Mon Jun 20, 2022 1:58 pm » in General Discussion Forum (started 2019)

First post

I am installing door window glass in my 27 Coupe. I can't seem to attach the bottom metal channel to the glass (on the door glass ) with out it falling off after moving the window up and down a couple times. --- does anyone now a way to attach the metal channel, and stop this from happening ... I have tried the window setting tape, it is not a...

Last post

Joe, Still interested in what you finally did to get the glass set into the bottom channel.

10 Replies

536 Views

Last post by BLB27
Wed Aug 10, 2022 11:10 pm
Wanted to Buy, 1917 Coupelet or 1918 Coupe ONLY!!!

Last post by ericmac « Wed Aug 10, 2022 10:35 pm
Posted in Classifieds - Vehicles
Replies: 55
by Walt Wise » Thu May 05, 2022 2:41 pm » in Classifieds - Vehicles

First post

I am searching to buy a 1917 Coupelet(two of the three models that year, but preferably the rounded back soft cornered roof, one is pictured below, or either the traditional flat roof, also a pic below, just like the 1918) or a 1918 Coupe. All three of these models in those two years have the removable pillars(removable door posts as some say). I...

Last post

I'd say that eBay body is worth jumping on. Obviously the price is crazy but shoot, but a restored coupe or Runabout, have the Coupelet body restored, mate the two and you are done in a year. Just my 2 cents worth.

55 Replies

6046 Views

Last post by ericmac
Wed Aug 10, 2022 10:35 pm
Big port intake for flathead with model M winfield

Last post by blauvelt « Wed Aug 10, 2022 9:55 pm
Posted in Classifieds - Parts
Replies: 5
by scott hills » Mon Aug 01, 2022 7:40 pm » in Classifieds - Parts

First post

Polished aluminum intake I bought in the early 80’s I thought from Bill Rader but Dan M. said somebody else made them model m Winfield size B it has a steel plate sweated on to the mounting flange done years before I got ran well on my car has Ben hanging on a wall for at least 3 decades. 700.00

Last post

Doing better than me, I just gave up! :geek:

thanks Franck nothing is simple for me on this phone my kid talked me into

5 Replies

584 Views

Last post by blauvelt
Wed Aug 10, 2022 9:55 pm
FS ALUMINUM TRANSMISSION COVER

Last post by Mark Chaffin « Wed Aug 10, 2022 9:51 pm
Posted in Classifieds - Parts
Replies: 1
by Mark Chaffin » Tue Aug 09, 2022 8:31 pm » in Classifieds - Parts

First post

Late 11' to 12' aluminum transmission cover. No reinforcements around bolt bosses. Pedals in above average condition. Shafts are tight in the holes. Later incorrect inspection cover. Will also need reverse and brake clutch cams to complete. Price is $400 plus domestic shipping. Mark Chaffin (951) 805-0928.

20220809_170756.jpg...

Last post

Reduced to $375 plus shipping.

1 Replies

287 Views

Last post by Mark Chaffin
Wed Aug 10, 2022 9:51 pm
Selling

Last post by Mark Gregush « Wed Aug 10, 2022 8:57 pm
Posted in General Discussion Forum (started 2019)
Replies: 19
by Professor Fate » Tue Aug 09, 2022 4:13 pm » in General Discussion Forum (started 2019)

First post

giphy_(17) (1).gif Anyway, I've decided to move my '26 along. With my busy work season coming on, i won't be back in the garage until April '23.

Last post

I’m just wondering I pay my $40 a year and I receive the magazine does that make me a non-paying member.?

Just makes you someone that has not added your number to your profile. Not sure how you would come up with the statement that you pay your dues and would be a non-paying member?

19 Replies

876 Views

Last post by Mark Gregush
Wed Aug 10, 2022 8:57 pm
Cleaning up some timers

Last post by Retro54 « Wed Aug 10, 2022 8:49 pm
Posted in General Discussion Forum (started 2019)
Replies: 12
by Will_Vanderburg » Sun Aug 07, 2022 5:09 pm » in General Discussion Forum (started 2019)

First post

Got some USED TIMERS in the mail. The contact rings look serviceable. I might get some rollers and test them out.

Second timer on the right I attempted to polish. Both looked like the last picture when I started

Last post

I got 11 of them for the price of shipping. None had rollers. New rollers are 25 bucks.

Will, great job on cleaning up. I agree with Rich, plenty of life and serviceability in these old timers! Not trying to misdirect your post, but if you are looking for rollers, please let me know. I have several that are taking up shelf space and will cut...

12 Replies

587 Views

Last post by Retro54
Wed Aug 10, 2022 8:49 pm
Kingston Coilbox Key

Last post by ThreePedalTapDancer « Wed Aug 10, 2022 8:17 pm
Posted in Classifieds - Parts
Replies: 1
by ThreePedalTapDancer » Wed Aug 10, 2022 5:27 pm » in Classifieds - Parts

First post

Original Kingston Coilbox key. Excellent condition. Very hard to find. 100.00 shipped lower 48.

B6B4FD38-9249-4E8C-906C-C9D068E59CEB.jpeg FF98D1F1-578F-412F-A34F-7D1CBBDD6B67.jpeg

Last post

I have been asked of the difference between original and reproduction keys. The one on the left is an original, the one on the right is reproduction. From an earlier post from a few years past.

28FA2D92-A1AB-4534-840F-14B72D0CBBE8.jpeg

1 Replies

173 Views

Last post by ThreePedalTapDancer
Wed Aug 10, 2022 8:17 pm
What ever became of Fast Frank?

Last post by Wayne Sheldon « Wed Aug 10, 2022 8:16 pm
Posted in General Discussion Forum (started 2019)
Replies: 9
by ThreePedalTapDancer » Tue Aug 09, 2022 11:43 am » in General Discussion Forum (started 2019)

First post

I was reading some old posts from years ago, and wondered, what ever became of Fast Frank Harris ? He was a common fixture on here, kinda faded away after his racing pal Humble Howard Genrich passed away.

9BB140F2-A3D1-4CE9-8A25-76D4F47DFF7D.jpeg DB18A0F7-1B7A-4739-B080-51B9CA9B222C.jpeg

Last post

I know that Fast Frank was having some health issues a couple/few years ago. I am very pleased to read that they are both still doing well!

9 Replies

753 Views

Last post by Wayne Sheldon
Wed Aug 10, 2022 8:16 pm
rear view mirrors

Last post by Allan « Wed Aug 10, 2022 7:47 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by Allan » Wed Aug 10, 2022 5:37 am » in General Discussion Forum (started 2019)

First post

I had one mirror of suitable patina for Henrietta. 20220810_185911.jpg 20220807_111355.jpg
Now I have a pair.
I was given another head of the same dimensions, and made the brass mounting and arm to mount it. Both left and right mounting arms fit on the underside of the header board across the front top bow.
I just have to wait 50 years for the...

Last post

Thanks fellows. i know a pond cleaner and a plumber, so I should be set.

Allan from down under.

7 Replies

333 Views

Last post by Allan
Wed Aug 10, 2022 7:47 pm
Loose axle nuts

Last post by mtntee20 « Wed Aug 10, 2022 7:46 pm
Posted in General Discussion Forum (started 2019)
Replies: 15
by Oldav8tor » Sat Aug 06, 2022 10:20 pm » in General Discussion Forum (started 2019)

First post

Recently I've helped a number of our club's new Model T owners with assessing the mechanical condition of their purchases. One common problem we found were rear axles that needed replacement - most damaged by the axle nut not being tight enough. Cracks radiating from the key slot, worn slots, corrosion / damage on the taper, etc., were the most...

Last post

Thank You Tim.

Checked the Can Crusher TT today. Yep, BOTH were loose. RIght one about 5/8 turn and Left one about 3/8 turn.

Had you not posted, I would have never checked since I thought my late best friend would have torqued them properly. AND, never thought they would/could loosen.

Terry

15 Replies

779 Views

Last post by mtntee20
Wed Aug 10, 2022 7:46 pm
6v to 12v model T starter conversion

Last post by AdminJeff « Wed Aug 10, 2022 7:22 pm
Posted in General Discussion Forum (started 2019)
Replies: 34
by AdminJeff » Sun Feb 02, 2020 12:40 pm » in General Discussion Forum (started 2019)

First post

I'm splitting this topic as it generated lots of PMs and emails. Seems that this topic is of much interest in general.

I am curious about your And I can also do 12v conversations. Can you tell us a little more about that?

Sure. First off, the stock T generator, properly rebuilt and adjusted with a fun projects (or equivalent) 12v regulator...

Last post

Jeff,

When you next find this a struggle just think of us here, many miles from the source of all good things T, where we have to strip the coil covers, unwind the copper strip, clean it, anneal it, re-shellac it, rewind over a special form and re-cover in nomex before we can even think of doing anything else...

... and then sometimes if that...

34 Replies

4802 Views

Last post by AdminJeff
Wed Aug 10, 2022 7:22 pm
Model T 26-27 Wire Wheel vs Model A Wheel

Last post by ChrisB « Wed Aug 10, 2022 7:16 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by Mr. T Ford » Sat Mar 27, 2021 8:52 pm » in General Discussion Forum (started 2019)

First post

This posting was originally in the parts for sale forum but I thought the information needed preserving so have moved it to the general forum.

Chris

Model T 26-27 Wire Wheel For Sale $110 Or Best Reasonable Offer.

wheel 1.jpeg

wheel 2.jpeg

wheel 3.jpeg

Last post

Moved from classified - parts forum

7 Replies

109 Views

Last post by ChrisB
Wed Aug 10, 2022 7:16 pm
A pair of 1919 to 1925 Headlights

Last post by Melba Nolan « Wed Aug 10, 2022 6:51 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Thu Jun 09, 2022 6:29 pm » in Classifieds - Parts

First post

For Sale: 1919 to 1925 Headlights. includes bucket, reflector, rim and castle nut $225 plus postage. for the pair

Last post

move to top

1 Replies

338 Views

Last post by Melba Nolan
Wed Aug 10, 2022 6:51 pm
WTB - A seat spring

Last post by RichJ « Wed Aug 10, 2022 6:29 pm
Posted in Classifieds - Parts
Replies: 2
by TheSaintDiscJockey » Wed Aug 10, 2022 9:28 am » in Classifieds - Parts

First post

Looking to buy a bottom seat spring that measures 41.5 x 19 .
A bit smaller is fine, but no larger.
Email brooks saint ives @ aol dot com (all one word).
Text is best @ 609 920 4220, or by calling the same number.
Many thanks, in advance!

Last post

E Mail sent

2 Replies

115 Views

Last post by RichJ
Wed Aug 10, 2022 6:29 pm
Body Parts Search

Last post by John kuehn « Wed Aug 10, 2022 5:14 pm
Posted in General Discussion Forum (started 2019)
Replies: 7
by Campbell Tellman » Wed Aug 10, 2022 11:14 am » in General Discussion Forum (started 2019)

First post

Hey All!
I have a 1916 touring and I have found some replacement parts. Some are difficult to find. I was wondering what suppliers would you recommend ? I suppose all the retailers use the same source. Is this the case?
Thanks,
Campbell Tellman

Last post

Fordor.com. ( Howells sheet Metal ).

These folks sell patch panels for Most T’s. You can try to contact them but it may take a while. Go to their website and check their T sheet metal parts list. They also sell on ebay so you might check their.

I’ve bought from them and the panel arrived in 2-3 weeks. BUT. the later order took 3 months. They...

7 Replies

251 Views

Last post by John kuehn
Wed Aug 10, 2022 5:14 pm
Here are the Rajo photos

Last post by Junk poor « Wed Aug 10, 2022 4:25 pm
Posted in Classifieds - Parts
Replies: 1
by ModelT46 » Wed Aug 10, 2022 3:59 pm » in Classifieds - Parts

First post

Here are the Rajo head photos

Last post

Email sent

1 Replies

319 Views

Last post by Junk poor
Wed Aug 10, 2022 4:25 pm
Rajo head -here are photos

Last post by ModelT46 « Wed Aug 10, 2022 3:49 pm
Posted in Classifieds - Parts

by ModelT46 » Wed Aug 10, 2022 3:49 pm » in Classifieds - Parts

I will post the photos - need to chagne size...

0 Replies

213 Views

Last post by ModelT46
Wed Aug 10, 2022 3:49 pm
Rear Spring--Odd Situation

Last post by Scott_Conger « Wed Aug 10, 2022 3:48 pm
Posted in General Discussion Forum (started 2019)
Replies: 18
by BLB27 » Fri Aug 05, 2022 9:46 pm » in General Discussion Forum (started 2019)

First post

I have noticed an odd situation with rear spring for my 1927 coupe. The end of second leaf on the right side is not in contact with the bottom leaf. The attached photo show the situation.

While not shown in the photos, there is a slight wear pattern on top of the bottom spring below the end of the second leaf.

Is this problem??

Last post

Bruce

If you are thinking of perhaps buying a new spring, call one of the suppliers which you like and ask them about the option of purchasing a spring and then removing the smallest leaf yourself. I am betting that correct or not, it will ride just fine, and fit like it should after doing that. Or, alternately and perhaps a better choice would...

18 Replies

677 Views

Last post by Scott_Conger
Wed Aug 10, 2022 3:48 pm
WTB - Commutator control rod swivels

Last post by Jerry Young « Wed Aug 10, 2022 2:54 pm
Posted in Classifieds - Parts
Replies: 9
by Jerry Young » Tue Aug 09, 2022 3:48 pm » in Classifieds - Parts

First post

I need a couple of commutator control rod swivels - P/N 3534S. Chaffins doesn't make them anymore so none of the vendors (that I contacted) are oit of them as well. If no one has some new units, I would take good used ones, just advise what you have, how much and how you want to get paid.
Thanks
Jerry Young

Last post

Scott, thanks for the update, I don't recall the country of origin for the Amazon parts, however, I did find the taps and dies on the website you mentioned, price not bad either.
Thanks
Jerry

9 Replies

317 Views

Last post by Jerry Young
Wed Aug 10, 2022 2:54 pm
FJ - Enclosed parts transport now from Florida to Ohio to Indiana to Chicago

Last post by FreighTer Jim « Wed Aug 10, 2022 1:36 pm
Posted in Services
Replies: 10
by FreighTer Jim » Sat Oct 09, 2021 6:42 pm » in Services

First post

****************************************

Google “ Model T Transport … 💡

You must own the vehicle you want transported
to be on my schedule - no exceptions.

Transport space subject to availability.

Space is filled on a first come - first serve basis
by written confirmation ( Text - PM - DM - Email ).

Call or Text FreighTer Jim @...

Last post

On my way now to Florida with this Austrian
Military Vehicle that saw service in Switzerland
that I picked up at The Volo Museum in Illinois.

551C6957-A9DE-4A5B-B7A6-77AF42D0C01C.jpeg

89348881-4D00-4E77-867D-BC302AA58DB6.jpeg

August 14th

8 feet of enclosed trailer space available
From Naples, Florida to Dayton, Ohio

August 18th...

10 Replies

2061 Views

Last post by FreighTer Jim
Wed Aug 10, 2022 1:36 pm
Model T "RACER" on B.A.T.

Last post by Loftbed « Wed Aug 10, 2022 12:49 pm
Posted in Classifieds - Vehicles
Replies: 13
by Loftbed » Tue Aug 02, 2022 12:15 pm » in Classifieds - Vehicles

First post

I just listed my 1915 Model T Racer on the B.A.T. auction site.
Take a look:

Rod
PS:
This is one FAST little car!!!! :D :D :D

Last post

I thought this nice racer is sold... Very cool one, I would say.

Still available call 541-345-3600

Rod

13 Replies

1364 Views

Last post by Loftbed
Wed Aug 10, 2022 12:49 pm
How to set up an OBS virtual cam plugin on a Mac

Last post by ranaadnan « Wed Aug 10, 2022 12:36 pm
Posted in OT - Off topic

by ranaadnan » Wed Aug 10, 2022 12:36 pm » in OT - Off topic

You need to worry about installing a specific camera plugin to use the OBS virtual webcam on your Mac, as the virtual camera feature is built into the latest version of the software. So, to start the process, you just need to download and install the latest version of OBS Studio. You can download directly from the OBS site or open your...

0 Replies

57 Views

Last post by ranaadnan
Wed Aug 10, 2022 12:36 pm
For Sale: NOS Military Vibratory Coil, Sealed & Waxed, $75 Plus Shipping

Last post by TXGOAT2 « Wed Aug 10, 2022 12:05 pm
Posted in Classifieds - Parts
Replies: 2
by RichardW » Tue Feb 01, 2022 10:42 am » in Classifieds - Parts

First post

For Sale: NOS Military Vibratory Coil, Sealed & Waxed,
$75 each plus Shipping. In Ocala, FL. (More than 50 for sale.)
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

Last post

Appears to be a manifold heat device for diesel engines. May be 24 volt (?)

2 Replies

727 Views

Last post by TXGOAT2
Wed Aug 10, 2022 12:05 pm
wheel pullers

Last post by SteveD « Wed Aug 10, 2022 12:03 pm
Posted in Classifieds - Parts
Replies: 3
by Melba Nolan » Wed Jul 20, 2022 7:35 am » in Classifieds - Parts

First post

FOR SALE; rear wheel puller 09/27 $65 plus postage

ton truck wheel puller 18/27 $100 plus postage

Last post

I forgot to specify the 09-27 puller

3 Replies

460 Views

Last post by SteveD
Wed Aug 10, 2022 12:03 pm
FJ - 1929 Ford AA Arden Dairies Delivery Truck Found In 1976 & Fully Restored - Still Owned By The Same Family

Last post by TXGOAT2 « Wed Aug 10, 2022 12:02 pm
Posted in OT - Off topic
Replies: 3
by FreighTer Jim » Sun Aug 07, 2022 11:42 pm » in OT - Off topic

First post

This 1929 Ford AA Truck as found in the foothills
of El Campo, California around in the early 1970’s
by Bob’s family when they were out motorcycle riding
and on a return visit his Dad made the owner an offer
to buy it which was accepted.

AA1F27CA-C783-4EE8-A7A8-3621585ED1D4.jpeg

The truck was owned by Arden Dairies which started in
El...

Last post

Nice ballast weight!

3 Replies

190 Views

Last post by TXGOAT2
Wed Aug 10, 2022 12:02 pm
For Sale : Exhaust Whistle, $90.00 Plus Shipping

Last post by RichardW « Wed Aug 10, 2022 12:01 pm
Posted in Classifieds - Parts

by RichardW » Wed Mar 16, 2022 12:40 pm » in Classifieds - Parts

For Sale : Exhaust Whistle, $90.00 Plus Shipping
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

0 Replies

427 Views

Last post by RichardW
Wed Aug 10, 2022 12:01 pm
For Sale : Exhaust Whistle, $70.00 Plus Shipping

Last post by RichardW « Wed Aug 10, 2022 12:01 pm
Posted in Classifieds - Parts

by RichardW » Wed Mar 16, 2022 12:47 pm » in Classifieds - Parts

For Sale : Exhaust Whistle, $70.00 Plus Shipping
(No PM) If Interested, Emails Only to: RWILL1914@AOL.COM

0 Replies

428 Views

Last post by RichardW
Wed Aug 10, 2022 12:01 pm
For Sale : Neville Steering Wheel Spider, $500 Plus Shipping

Last post by RichardW « Wed Aug 10, 2022 12:00 pm
Posted in Classifieds - Parts

by RichardW » Wed Apr 06, 2022 10:32 am » in Classifieds - Parts

For Sale : Neville Steering Wheel Spider, $500 Plus Shipping
(No PM) If Interested, Emails Only to : RWILL1914@AOL.COM

0 Replies

402 Views

Last post by RichardW
Wed Aug 10, 2022 12:00 pm
Gas Lines

Last post by Jerry VanOoteghem « Wed Aug 10, 2022 11:55 am
Posted in General Discussion Forum (started 2019)
Replies: 11
by Original Smith » Tue Aug 09, 2022 3:13 pm » in General Discussion Forum (started 2019)

First post

Were gas lines always zinc plated from 1909? I have a NOS one that is, and an original one on my 1925 too.

Last post

I believe some years back, John Regan did some extensive research into fuel lines. Hopefully, I'm not misquoting him, but I believe his conclusion was that fuel lines were all brass.

11 Replies

547 Views

Last post by Jerry VanOoteghem
Wed Aug 10, 2022 11:55 am
WTB SCHRADER 2061 RIM NUTS - FIT 725 STEMS

Last post by Original Smith « Wed Aug 10, 2022 11:41 am
Posted in Classifieds - Parts
Replies: 5
by CDooREDW » Mon Aug 08, 2022 9:39 pm » in Classifieds - Parts

First post

Looking for 3, preferably 4, nickel Schrader P/N 2061 rim nuts that fit Schrader 725 (fatter) metal stems.

Having trouble loading photos. These are the formed flat nuts with recessed rubber or leather washer in the nut recess.

Thank you. Text works at 93 one - 6 oh 7-8353

Ron Wenzel in HSV

Last post

For everyone's information. Dan McEachern has exact copies of the original rim nuts for your early car. He went to a lot of trouble to make these. He is asking $20 each for them. Check the latest judging guidelines and they are mentioned as being correct for all T's up through 1916.

5 Replies

222 Views

Last post by Original Smith
Wed Aug 10, 2022 11:41 am
1917 Speedster for sale

Last post by Quickm007 « Wed Aug 10, 2022 10:48 am
Posted in Classifieds - Vehicles
Replies: 12
by spadpilot » Sat Jun 25, 2022 12:18 pm » in Classifieds - Vehicles

First post

1917 Model T Ford Speedster for Sale
This car has never been driven. Zero miles!
The bones of this project were discovered in an abandoned mine in the
California Gold country about 5 years ago.
All frame rails, cross members, suspension and steering components have been
blasted and powder coated. The engine has been completely rebuilt with...

Last post

I can't believe this speedster was not sold, I finished last year my 1914 speedtser restoration and it cost me $27,000.00. I would say this one, is the best bargain I saw for long time for a car with nothing to do on it...

12 Replies

3865 Views

Last post by Quickm007
Wed Aug 10, 2022 10:48 am
WTB - Seat Mounting Brackets

Last post by Ken Buhler « Wed Aug 10, 2022 10:41 am
Posted in Classifieds - Parts
Replies: 1
by Banjoe » Wed Aug 10, 2022 9:23 am » in Classifieds - Parts

First post

I need 2 floor mounting brackets for 1927 Tudor front seats. I have 3 but one of those is broken so not usable.

Many thanks for any help,

Joe

Last post

I have some. I sent an email.

1 Replies

63 Views

Last post by Ken Buhler
Wed Aug 10, 2022 10:41 am
Livingstons in the wild desert

Last post by Mike Lebsack-Iowa « Wed Aug 10, 2022 10:34 am
Posted in General Discussion Forum (started 2019)
Replies: 9
by hull 433 » Mon Aug 08, 2022 7:32 pm » in General Discussion Forum (started 2019)

First post

Here's a Livingston radiator being used for its intended purpose, to provide extra cooling in hot environments. This car is working the Nevada desert at what is now an aviation research facility.

It might have come from a dealer specializing in desert work, like RC Boyer in Mason Nevada, on the Nevada Copper Belt railroad line. He advertised his...

Last post

I have a nice original on the shelf in my shop that has no dents or dings in the fancy work or the core. Is tarnished a little but heck it is old. Had a machinist make me a beautiful brass cap with a Motometer too.

9 Replies

642 Views

Last post by Mike Lebsack-Iowa
Wed Aug 10, 2022 10:34 am
Rebuilt T Starters for Sale & 12 volt starter conversions

Last post by AdminJeff « Wed Aug 10, 2022 10:12 am
Posted in Classifieds - Parts
Replies: 9
by AdminJeff » Thu Mar 11, 2021 11:01 am » in Classifieds - Parts

First post

COMPLETELY REBUILT STARTERS NOW FOR SALE.

The 6 Volt starters w/ with BRAND NEW field coils are $375 each with core exchange
12v converted starters are $500.
ONE YEAR , unconditional, no questions asked warranty ALSO included.
If you don't have a rebuildable core, the Core charge is $25
Shipping is $21 fully insured anywhere in the USA.
.
5...

Last post

OK Jeff

I want to order one of your 12 volt conversion starters for my 1914 speedster.
No problem with paying for the order with paypal.
Thanks a million for providing this service.

Ed Reed

pm sent.

All 6 12v starters are now sold. I'll do another batch as soon as I get more field coils.

9 Replies

3872 Views

Last post by AdminJeff
Wed Aug 10, 2022 10:12 am
Tire sizes for 26/27 , will 450/475-21 be ok on my roadster pick up?

Last post by TXGOAT2 « Wed Aug 10, 2022 8:21 am
Posted in General Discussion Forum (started 2019)
Replies: 6
by Oldrusty26 » Mon Aug 08, 2022 1:06 pm » in General Discussion Forum (started 2019)

First post

Good afternoon guys ,
Just wondering if it’d be ok to use 450/475-21 tires on my roadster pick up project ? Will I need different sized tubes and flaps as well ?

Thanks in advance !!

Last post

Ex: 4.50 X 4.75 X 21: 4.50 is the nominal section height of the tire, 4.75 is the nominal section width, and 21 is the nominal rim size the tire will fit. This applies to tires made for drop center rims. None of these figures represent actual tread width. I've seen a great many tires the actual measurements of which do not match their nominal...

6 Replies

301 Views

Last post by TXGOAT2
Wed Aug 10, 2022 8:21 am
steering wheel

Last post by Allan « Wed Aug 10, 2022 5:10 am
Posted in Classifieds - Parts
Replies: 10
by Melba Nolan » Fri Jul 08, 2022 10:31 am » in Classifieds - Parts

First post

For sale: excellent condition black steering wheel with screws $50 20220705_133502.jpg 20220705_133514.jpg plus postage

Last post

I have yet to see a fatman wheel with other than a nice wooden rim.

Allan from down under.

10 Replies

771 Views

Last post by Allan
Wed Aug 10, 2022 5:10 am
Finally found a screw driver for my TT

Last post by KWTownsend « Wed Aug 10, 2022 2:07 am
Posted in General Discussion Forum (started 2019)
Replies: 12
by JunkyJud » Sat Aug 06, 2022 9:52 pm » in General Discussion Forum (started 2019)

First post

I've looked for quite a while for a correct screw driver for my TT. I found one today at a steam and gas engine show for $8.00.

Is there any record of years when this was provided in the tool kit?

Screw driver.jpg

Last post

Larry-
The drawing indicates on 10-11-20 is was Obsolete. The screwdriver does not appear in the 1921 parts book. I would concur it was no longed supplied in the tool roll in 1921.

: ^ )

Keith

12 Replies

753 Views

Last post by KWTownsend
Wed Aug 10, 2022 2:07 am
Charging Journey.......

Last post by Steve Jelf « Wed Aug 10, 2022 12:13 am
Posted in General Discussion Forum (started 2019)
Replies: 21
by CatGuy » Tue Aug 09, 2022 8:33 am » in General Discussion Forum (started 2019)

First post

Well, it's been hot so I've been chipping away as I can. The garage is usually around 100 in the evenings. I did manage to find a guy that could, and did weld the wheel studs on. I know the best thing would have been all new (3 at least) hubs, but that would have been expensive.
As for the charging system.......still stumped. As you may recall...

Last post

Scott, even if you construe the other Scott's remarks as somehow unfriendly or offensive, pay attention to his advice. When it comes to Model T's, he knows his stuff. It's smart to take his suggestions seriously.

21 Replies

542 Views

Last post by Steve Jelf
Wed Aug 10, 2022 12:13 am
starter bendix

Last post by Melba Nolan « Tue Aug 09, 2022 11:09 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Wed Jul 20, 2022 7:46 am » in Classifieds - Parts

First post

FOR SALE: starter bendix $50 plus freight

NOS: parts to rebuild
starter drive head $8
starter drive key 35 cents
head sleeve for bendix $12
bolt and washer set $3
washer 50 cents
bendix spring $11
cover screw 50 cents
cover screw and washer set $1
bendix head spring screw $1.50

all plus postage 20220615_102415.jpg

Last post

move to top

2 Replies

265 Views

Last post by Melba Nolan
Tue Aug 09, 2022 11:09 pm
misc

Last post by Melba Nolan « Tue Aug 09, 2022 11:09 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Mon Jul 18, 2022 10:10 pm » in Classifieds - Parts

First post

For Sale: rear fender bracket to frame bolt set $15
manifold gasket set 09/27 $8
spindle arm bushing 09/27 $1
starter drive sleeve 19/27 $12

all plus postage

Last post

move to top

2 Replies

459 Views

Last post by Melba Nolan
Tue Aug 09, 2022 11:09 pm
1915 to 1925 Coil Box

Last post by Melba Nolan « Tue Aug 09, 2022 11:07 pm
Posted in Classifieds - Parts
Replies: 2
by Melba Nolan » Thu Jun 30, 2022 9:12 pm » in Classifieds - Parts

First post

For Sale: 1915 to 1925 coil box in excellent condition $155 plus postage

Last post

move to top

2 Replies

462 Views

Last post by Melba Nolan
Tue Aug 09, 2022 11:07 pm
Head

Last post by Melba Nolan « Tue Aug 09, 2022 11:06 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Thu Jul 21, 2022 8:13 pm » in Classifieds - Parts

First post

FOR SALE: used head in very good condition $100 plus postage 20220721_124851.jpg 20220721_124955.jpg

Last post

move to top

1 Replies

487 Views

Last post by Melba Nolan
Tue Aug 09, 2022 11:06 pm
Brass SOLD

Last post by Melba Nolan « Tue Aug 09, 2022 11:06 pm
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Thu Jul 21, 2022 10:44 pm » in Classifieds - Parts

First post

FOR SALE: Brass steering to dash support bracket. Bottom only. $20 plus postage
20220721_213908.jpg 20220721_213902.jpg

Last post

move to top

1 Replies

500 Views

Last post by Melba Nolan
Tue Aug 09, 2022 11:06 pm
Drag link

Last post by Melba Nolan « Tue Aug 09, 2022 11:02 pm
Posted in Classifieds - Parts

by Melba Nolan » Tue Aug 09, 2022 11:02 pm » in Classifieds - Parts

For sale: Drag Link $200 plus postage

0 Replies

103 Views

Last post by Melba Nolan
Tue Aug 09, 2022 11:02 pm
Rear leaf spring assembly made easy(er)

Last post by NealW « Tue Aug 09, 2022 9:14 pm
Posted in General Discussion Forum (started 2019)
Replies: 18
by NealW » Sat Jul 30, 2022 2:29 pm » in General Discussion Forum (started 2019)

First post

Restoring or working on a Model T is hard work, but generally pretty easy. Some projects are easier than others though. This is the second T that I have done a frame up restoration on, and it was time to reassemble the painted leaf springs. The front springs are really easy to reassemble, and can be done with a couple of wood parallel clamps and a...

Last post

Neal, What is the year and model of the car that the spring is for?

It's from the 1911 touring car that I'm restoring

18 Replies

819 Views

Last post by NealW
Tue Aug 09, 2022 9:14 pm
Show us your hit n miss engines

Last post by tdump « Tue Aug 09, 2022 7:46 pm
Posted in OT - Off topic
Replies: 48
by Angmar » Fri Jul 31, 2020 12:25 pm » in OT - Off topic

First post

I am not sure if this topic is in here someplace or not but I was encouraged to post on the subject from 2 other members so here it goes. Hope you guys like it. This is one of my other toy's or hobbies. 1926, 25 horse Witte throttle governed. Weighs about 4500 lbs, runs like a Swiss watch.

Last post

Well ooops,I looked forward to posting these 2 pics to this thread but only 1 picture has engines that are technically hit and miss.
I refurbished the painted Maytag in 2018 from a scrap yard rescued engine that had to have another flywheel and base,but it is somewhere in the mid 30's because of the oilier on the crankshaft near the starter.The...

48 Replies

10951 Views

Last post by tdump
Tue Aug 09, 2022 7:46 pm
WTB hood board bolt for 1915

Last post by hull 433 « Tue Aug 09, 2022 6:55 pm
Posted in Classifieds - Parts
Replies: 3
by hull 433 » Mon Aug 08, 2022 7:09 pm » in Classifieds - Parts

First post

I'm missing one hood board bolt for my 1915, the shorter one for the front. Here's a photo of the rear hood board bolt already in hand.

If any one has one, I'd like to give it a home. Thanks!

Last post

Hank, Thanks for the offer to look, I appreciate that. I just located one nearby, so don't go to any more trouble.

For the record, short bolts are 3 1/2 and the long ones are 4 .

3 Replies

221 Views

Last post by hull 433
Tue Aug 09, 2022 6:55 pm
FS AERMORE EXHAUST WHISTLE AND CUTOUT

Last post by Mark Chaffin « Tue Aug 09, 2022 6:53 pm
Posted in Classifieds - Parts
Replies: 2
by Mark Chaffin » Sat Aug 06, 2022 10:19 am » in Classifieds - Parts

First post

Aermore exhaust whistle and cutout valve NORS. No longer available from the manufacturer. This one is in excellent condition. Price was $400 now $375 with domestic shipping included! Only have one available. Mark Chaffin (951) 805-0928

Screenshot_20220806-071407_Chrome.jpg

Last post

Sold and gone with the wind! :)

2 Replies

327 Views

Last post by Mark Chaffin
Tue Aug 09, 2022 6:53 pm
Ride-along 1926 T Runabout

Last post by George House « Tue Aug 09, 2022 2:27 pm
Posted in General Discussion Forum (started 2019)
Replies: 5
by Flivver » Tue Aug 09, 2022 8:16 am » in General Discussion Forum (started 2019)

First post

This is my first ride-along video. No talking, no music, just the whir, whine, and putt of the T.
ReidsvilleRd20220729.jpg

Last post

Ah yes ! I see it now and watched the video. Thanks Mark and thank you Steven for producing it. Was most refreshing for me to hear a strong Model T engine without an exhaust leak 😂🇺🇦

5 Replies

250 Views

Last post by George House
Tue Aug 09, 2022 2:27 pm

Search found 248 matches

Go to advanced search