MTFCA Forum

7315F643-E187-4476-8919-21C4E4AEBCC3.jpeg 0439AA5F-8079-4780-8547-A913A44400A6.jpeg 0161E3CF-E8F7-43FD-B310-B2BBDB4D4286.jpeg E7E18084-21EA-43D0-B407-B3391DB9BF11.jpeg

A friend just bought a Model T speedster with buffalo wheels. He feels the caps are in bad condition, so he would like to replace these with better ones. Does anyone repop these or do we need to advertise for originals? I don't see them in any of my catalogs. What is a fair price? Are there left and rights? I am not a speedster guy, so this is new...

On the Road Again b flat.jpg
.
So I went for the second of the two vaccine shots about a month ago and from what I've been told, that's supposed to do it. Hard to believe that after twelve months of hiding at home, grocery shopping at dawn to avoid humanity and the quest for toilet paper, it could be over so suddenly and so easily. Well, maybe...

If you've personally re-assembled your 1926-27 coupe, contact me here and I'll contact you by email or messenger on this forum. I have some questions that I need answered before I proceed any further.

Does anybody out there in T Model country have a manual for the TT rear axle that you'd be willing to sell to me or make a
copy? I need to tear into mine and replace the gears (7 1/4:1 to 5 1/6:1). Some literature would help so I won't be totally winging it. Please send me a pm if you can help. Thank you. Bob

Hello, i am trying to get a complete list of prewar (mainly brass era) swap meets, car shows, and tours that are held (mainly in the US, but abroad welcome) because it can be hard to track them down as many are not well advertised and info is limited.
I'd like to just see whats out there and how different events are held. As well as to see if any...

I am planning to prep and paint my car soon. My original paint plan was Windsor maroon. does anyone here have pictures of model ts with that color? also, i am going to paint the fenders and running boards black.

I would like to build a replica of the #2 Ford car that was in the 1909 race. I am looking for information on how the body was constructed. Does anyone have plans of pictures of the body construction it would be greatly appreciated. This picture is a replica of a car driven in the 2009 race/ jputnam(at)wcoil.com

I am just now getting to the water pump on my 08 model SR. The water pumps were built into the radiator similar to the first 2500 T's, but ran off a gear mounted on the flywheel which is on the front of the engine. Mesh was adjusted through rubber pads/shims on the radiator mounting. I found that the gear on the water pump shaft is Fiber. The gear...

So when I went to hook up my Radious rod it didn't line up. I'm thinking that I have to jack up the frame of the car to allow the front suspension hang and line it up that way. Am I missing something?

IMG_4323.jpeg

She’s in real nice condition. Restoration isn’t that old. Has a ruckstell rear end and rear juice brakes. The water pump and radiator hoses has been changed since the engine picture. Also has newly rebuilt coils and carburetor installed.Runs and drives as it should. $9,500

884E0325-85FD-47CC-8C4E-D5A663448377.jpeg...

Looking for T snowmobile parts. What do you have.

So I'm not sure if the person who put this together before had it on correct. Does the bend go up or down?

Like A

IMG_4287.jpeg

Or B

IMG_4288.jpeg

So my steering wheel key seemed to be loose. It looks like it is tapered like a wedge. so I ordered anew one and it won't fit when the wheel is on the pinion.
New on the left old on the right
IMG_4311.jpeg

You can see the small gap on the pinion with the old key.
IMG_4309.jpeg

Once I tighten the big steering wheel nut with the old key the...

I picked up a Weaver axle stand at a local swap meet on Sunday. Tried looking up the model that I have and all I was able to find is the more deluxe version made by Weaver. does anyone have any factory or information on this model?

Henry Ford was fascinated with watches as a child. He learned to take them apart and reassemble them at an early age.
Georges Frederic Roskopf developed “La Prolétaire” (People's Watch) in 1867, intended to be affordable by the masses.
I suppose it's possible that young Henry would have known about him and his watch, n'est pas?

This is the Speedster in the upcoming Montana auction. I know it is of interest to Speedster guys and some would like to see these.
SpdstrMT9.jpg
SpdstrMT11.jpg
SpdstrMT1.jpg
SpdstrMT5.jpg
I asked the auctioneer to send them to me so we could share them. I have no connection with the sale. He felt there might be complaints if he posted...

This came with an assortment of model t parts I purchased. I know very little about whistles. Happy to answer questions if I can. $85 plus US shipping. Thanks

Once again it is time for the Sunday Swap Meet. This week we have an assortment of mostly new items. Prices indicated are well below retail. Items are generally shipped USPO Priority Flat Rate. Combine items and realize a savings on shipping. Payment by PayPal (preferred) or by check for those not so inclined to use PayPal. First come first serve....

It was pointed out to me by another forum member that the thread I initiated asking people to report on their experiences with the Covid 19 shot has been deleted. I guess something was said that the administrators found offensive or too off topic for the off topic section. If that is so, I apologize but I can't leave it without a final comment....

I have 5 of these ready to go. Latest and best design IMHO. Also , cheapest yet at $135 ppd to your door. Includes T column mounting strap for painless install. Tmorsher@icloud.com to reach me, please no PMs, or messages here to call you. No can do. No will do. 9AB775F4-22B8-4895-AE44-6539E457F16F.jpeg

Once again, time for the Sunday Swap Meet! Prices and shipping are as indicated below. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951) 805-0928

20210411_102745.jpg

1. Model T Jack Ford script $40.00 plus $15.50 shipping.
2. Taillight $30.00 plus $15.50 shipping. SOLD
3. Universal joint. Minimal wear. $40.00...

On the 26/27 coupe, roadster, touring, and tudor, which side of the firewall should the steering column flange mount ? I've looked over quite a few pics on the net and it seems both ways are quite common. I believe on the pre 26 models they all mounted to the inside (passenger side) of the firewall.
I'm thinking the 26/27 also mounts on the...

Does anybody out there in T Model country have a manual for the TT rear axle that you'd be willing to sell or make a copy?

I need to tear into the axle of my truck and it would be nice to have some literature so I won't be totally winging it. :)

Please send me a pm if you have such a manual. Thank you. Bob

Nice gear with very minimal wear. $20, domestic postage included.

I have five New Old Stock Shrader 777 valve Stems complete with all original hardware excellent storage and original plating

I am looking for 8 Champion brass top take apart Number 7 park plugs would like to trade the Shrader stems plus cash depending on condition of the plugs. I can send photos to your cell phone or email.Prefer calls 507...

Hello,

I don't know much about brass parts on a Model T. I was wondering if these parts could be cleaned up and how to go about it.
image2.jpeg
image1-7.jpeg

Want to locate Mike Davis . Thanks Ted 503 728 3476

I've posted this on the early ford site without luck, so thought I'd try here also. I need a few parts to complete my 08 SR.
Hood former, gas cap, radiator cap, timer cover and front spring shackles. I will be stopping by Tulare so could pickup there.

thanks Jim

I used to believe that old axiom when I was younger,
then I went to work and learned it was mostly a story for telling customers.

But successful people are breaking that paradigm all the time - Henry Ford was one of them.
General Motors tried to corner the market on automobiles and would have been happy perpetuating that myth,
but Henry Ford was...

I tried to go to the Cimorelli Model T site and got something completely different, has the site been hijacked? :(

Model T 26-27 Standard Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

Model T 26-27 Pedestal Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

Up for sale, my 1923-ish T doodlebug.
$4750, located in the Capital Region of NY.
IM or email: crazydart400 AT yahoo DOT com

If you've subscribed here long enough, you know this and what I started with. This is one of the best T doodlebugs on the east coast and has gotten used for work and play alot since I've owned it. I have made it into one...

I am thinking about rebuilding a few bare front axles to bring to Luray. These will be without perches, blasted, straighten, Stevens inserts in repaired yokes and primed. Not going to do unless there is interest. Email me at address in pictures. Thanks Dan
16D07E4B-5482-49EC-807F-4A83A162C947.jpeg

FS early May West rear Shackle set plus bushing. Please refer to the pictures bellow. They have some solder made by previous owner in the goal to fit well with bushing but they are in descent condition as well. . PayPal prefered. Thank you MTFCA.

Mae west.JPG Mae west 2.JPG

FS new Rear shackle set, non-original style U-style. Never used. $20 for the set plus Shipping. PayPal prefered. Thank you MTFCA

New shackel set.JPG New shackel set 2.JPG

Hi I'm selling a Very nice Running board luggage rack. $45 or BO plus shipping. PayPal prefered. Thank you MTFCA.
rack.JPG

FS 1909-1912 Cast Aluminum hood handles new repro never used. $20 plus shipping.

Hood Handle 1911.JPG

FS complete Ford Faithful Ouside Oiler Kit. This is a reproduction of the original “Ford Faithful Oiling System” that was offered to Model T owners from 1911 through the twenties. No modifications to your original engine are needed, no holes need to be drilled. I used one time only and decided to go with different path.

Comming with:
“Ford...

[size=1 Kingston Carb L4.JPG Kingston Carb L4 A.JPG Kingston Carb L4 B.JPG Kingston Carb L4 C.JPG 50]FS Kingston Carb L4. Asking 75$ or BO plus shipping.

I have the turtledeck itself. Nothing else. I can't figure out how it attached to the frame. There are no brackets.

FS Kingston Carb L (1915-16), asking $80 or BO plus shipping

Kingston Carb L.JPG Kingston Carb L A.JPG Kingston Carb L B.JPG Kingston Carb L C.JPG

FS Early Side light brackets, they are new and Excellent Reproduction. Asking $50 or BO for the pair plus shipping. PayPal prefered. Thank you MTFCA.
light braket.JPG light braket 2.JPG

Does anyone support the True-Fire ignition system with parts or information? A friend got one of those setups in a box when he bought his car. The main coil portion looks to be fine but the timer has been abused and is likely shot. Any ideas about where to find support and/or documentation would be appreciated.
Thank You,
Walt Berdan
wberdan at...

swap meet.png

Hi everyone new to this forum ,,I am building a Roadster pickup 1926 in the UK ,, :?: my question is is can I use a modern coil through an atwater kent type h old style distributor ,,thanks for your time

Time to clean up and make space!!! I will be in Tulare on May 1st at Space I-16.

I have a bunch of stuff and only a van. I am looking to presell as much as I can, so I know what to bring. I don't intend to ship this stuff. If you want it and don't plan to go to Tulare you will need to arrange pickup with someone who is.

I will update this top...

This is my schedule for the next two weeks

I will be helping out at The Early Ford V-8 Foundation
Spring Swap Meet in Auburn, IN on April 23rd & 24th

Leaving Auburn, IN April 24th for Charlotte, NC
Empty trailer has 30 feet available

Picking up in Charlotte, NC & headed west on I-40
13 feet available to Jonesboro, AR

Full to California from...

Hi all I'm new to this forum ,,i need help !!question ,,please can anyone tell me whether I can use a modern 12-volt coil in an atwater Kent type h distributor ?thanks for your time.

any one know what this tool is used for? Looks like a tool for cutting oil grooves in babbitt bearings, just my guess

Any one recognize this tool? looks like a tool for cutting oil grooves, but that just my guess. Tha shaft opens the two cutters wider as it is cranked into the head piece.

I have no connection to the seller. OHV T got my attention.

This may seem like an OT thread at the beginning but it is Model T related at the end.

When I was in the Marines, in the Fleet Marine Force, we spent a lot of evening time polishing brass belt buckles for the next morning’s inspection. In 1974, I was selected for Embassy duty, AKA MSG Duty (Marine Security Guard). Basically, we were on loan to...

I have an early 1919 CLUM pin type ignition switch that I am working on.
It has the cast switch lever and the back plate which is made of composite layers of cardboard is separating and has burn marks at some of the terminals.
The back plate has the following stamped: 10072 CLUM MILWALKEE PAT APPL FOR
I know that some of the suppliers have newly...

Here is a really nice, all brass early Jones 60 MPH speedometer. The overall diameter is about 3 and the depth is about 2 1/2 not including the mounting bracket. It has a very clear and crisp face with strong numbers. There are no cracks in the brass body or the rim which is unusual. The original beveled glass lens is clean and without chips or...

Looking for a good used 11 tooth pinion with no pitting, chunks missing, cracks or major wear. This is for a temporary rear end. I don't have room to tie up while I rebuild the one that is under the car (which is going to be slow process at this point) so have to be able to move/drive the car till it is done. The 2 I have now are too far gone for...

So, what's up with Birdhaven? I see the Fun Projects website is down...only the Texas T site appears to be up and it doesn't list FP parts nor has it been updated for a long time. I know they had some supply issues and some parts were not available.... have things gotten worse? Is a telephone call the only way to find out what parts they do have?...

Evening all,

Here is a single rear roadster fender iron for the left side. In nice shape!

Asking $50 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on pickup is...

Evening all,

I have here a pair (left and right) set of roadster rear fender irons. These look a bit shorter than I those for my 13. I have the measurements in photos. I dont know if they were modified, this is how I got them.

Asking $100 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June,...

Evening all,

Have a set of 1913 1914 front headlight forks and front fender iron set up for grabs. They are still attached to my frame, so please excuse the odd photos ( I will keep the bolts and castle nuts though). A bit of light rust, but no pits. Should clean up nice.

Asking $175 plus shipping. I can ship worldwide.

If paid in advance, I...

Evening all,

Found a few more parts in the barn to get rid of. I found this 1914 complete windshield setup I do not need. Its in nice shape, I unfolded it for the pics, so the hinges arent frozen. Has both original support rods in great shape, not bent or twisted. The original brass channel is there, but part of one half is bad as seen in the...

Evening all,

Here is a single 1914 sidelamp bracket that is surplus to my needs. Some pitting as seen.

Asking $20 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on...

Evening all,

I have 2 of these, in the same condition, and only need one. So this one has to go. A nice Solar gas spotlight. It has the original :lens: but has a crack as seen. NO reflector or burner unfortunately (mine too is missing). Otherwise in nice shape, with a lot of flaking paint.
No lower mount, and Id really like to see what one...

Hi.
I have recently purchased a 1925 T Model Tudor that was sold at Motorcar studio Atlanta in 2016.
I was shipped to Melbourne Australia.
I'm looking for the previous owner that would have the history of the car.
I'm enjoying the vehicle and still learning how to drive the car. It's a fantastic car to enjoy.
Any help would be greatly...

Nice used 26-27 gas tank. Very solid, pretty clean inside. $450 plus shipping. Kdmks AT att.net.

I want to mount a small tool box onto the running board of my 1912 Flanders, but I don't want to drill any holes in the running board. Does anyone have a pair of luggage rack brackets or an otherwise trashed luggage rack that I can cannibalize for the brackets? I hate to buy and cut up a perfectly good, complete luggage rack.

In need of a couple of Bosch front plates for dizzy, no reproductions and crack free
IMG_0005.jpg

This is a very good running car. This is a March of 1916 engine #. 4 New Calimer’s Wheel Shop wheels and new tires, Brassworks flat tube radiator and new gas tank. Body has been painted years ago. Original and very good wood , no body rustout or repair that I can see. I am listing this car for a good friends widow. The engine and trans is a total...

Bruce McCalley's Model T Encyclopedia now available on mini USB's. The Encyclopedia is an expanded version of his book Model T Ford,The Car that Changed the World and includes data never before published anywhere else. Everything you need to know about a Model T is now available to quickly install on your computer, laptop or just carry with you to...

Not sure if they were accurate, but 999 was owned at one time by a woman. And, she was reported to be the fastest woman on earth. In February 1904 the old racer and it's mate were reportedly purchased by stage star Leah Russell:

AFE17C6B-DE40-41AF-905C-9E7AD899B53C.jpeg

77BED56D-FC2B-4F98-8FB2-24A961191037.jpeg

In March, Ms. Russell made...

As the title says. I found my last one a ‘Bimel’ did not fit so I need one more front wheel to get my project rolling.

Thought you kids might enjoy this one.

I stumbled on this cart, a near 10 minutes from my house on Craigslist. It was priced for weeks between. 100 and 200 bucks, and for what it seemed to be I thought that was a bit much. Upon checking the add this past Monday, a price drop to $40 made me text the guy immediately and set a time to pick it up....

I took this support bracket off a early column but was told it was a rare style, might be 1925 only, no idea , not in the books, what do you think ? Bob

per request , i am offering my dial indicator toolset unit separately from my linebore unit ... this is available for 1 or 1.250 diameter boring bars ( buyer must specify ) ... this is used to measure the offset of the boring bit and is NOT a roll over type toolset as used by Tobin-arp and others ... price for 1 toolset is $90.00 + $10.00 postage...

60D47D8C-01C9-46B4-81E4-DC6C11AB80BA.jpeg BCB68BCA-2869-4490-9CE2-52F487B13E0E.jpeg 23452ED0-3AEF-4AF0-9C88-87660BA309B4.jpeg 709B19C3-952B-4CA5-A9D9-B2A0A407DED1.jpeg

I’m looking for a decent set of rear fenders for a ‘26-27 truck or roadster. Please send photos if you have any for sale. Thank you

I had a part shipped from Indiana to Milwaukee. Indy to Aurora, IL, to Milwaukee suburbs, and now it is at the Chicago International Dist Center. Makes me wonder where they are going to ship it next. To OZ?

WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg

The 7th Annual, Mid-Atlantic prewar swap meet in Luray, Virginia is almost here! We have vendors from Florida, Alabama, Michigan, New York... and all points in between. As of this writing, we have 49 vendors occupying 93 spaces - with 33 of those vendors coming from out of state! We've broken all of our previous spring meet records and there are...

Appears to me to be NOS. Interesting little carburetor that was pretty popular in the day.

$175 + $15 Priority mail. Paypal only

2019 8 27 carbs for sale 024.JPG

2019 8 27 carbs for sale 023.JPG

2019 8 27 carbs for sale 022.JPG

Stan Howe 406 949 3448 call or text
stanhowemt@aol.com

Looking for 4 Kelsey wheel lugs like in the first attached picture. Alternatively, if those can't be found, 2 of the slanted lugs with a K stamped on them should work. Prefer the first kind with Kelsey written on them so that all my lugs will match. These are on the rear wheels of a TT.

Thanks,

Grady from Paradise, TX

Was at an auction today and couldn't resist picking up this Power Unit as a project for Dad and I. Don't know much about the history so I was hoping you guys can give some information on this particular unit.

It looks very much manufactured with some shade tree modifications. The engine is a '20 and the transmission is configured for direct...

Up coming swap meet
56TH Annual Little Hershey Swap Meet
May 15th at the
Boone County Fairgrounds
put on by the Model T Ford Midwest chapter

Here are some NOS Ford script Tie Rod bolts, part T 2718. These have flip top oilers, so the are for 1917-27 cars and TT. These came out of a Ford Dealer in North Tenn that closed in 1928.
They still had the wax coating for rust protection on them when I took them out of the parts bin there. This pair was cleaned up with thinner. These are are the...

We are having our annual Model T-Model A- pre WW2 swap meet on Saturday April 17th at 7A.M. at our farm at 7525 Co. 12 Blvd. Kenyon, Mn. It is 50 Miles south of St. Paul Mn. There is room for primitive camping the day-night before. Bring your parts, cars, and period memorabilia. There will be a lunch wagon on hand. Questions call 507 458 6778,...

We will be holding our annual spring Model T- Model A- prewar swap meet on April 17th at 7 A.M. at our farm 5 miles East of Kenyon, Mn. at 7525 Co. 12 Blvd. It is 50 miles south of St. Paul, Mn. It will be outside only. No setup charge. We have room for primitive camping the day-night before unless there is heavy rain. There will be a lunch wagon...

IMG_8309comp.JPG IMG_8277comp.JPG IMG_8309comp.JPG IMG_8283comp.JPG This is a prototype Cyclecar built from 1918-1925 in Hanlon, MA by a Dr. Kirk Hanson, who left virtually no information behind. The engine is a 1923 Henderson motorcycle engine. I am told the rear end is Model T. Does anyone recognize the transmission? It is a 3-speed with...

For sale : Rebabbitted Model T main bearing sets , laminated shim set and timesaver lapping compound ... re-babbitted using tin base automotive high speed babbitt (SAE#2 Government Genuine alloy )... will supply caps bored to Standard diameter or customer specified dimension ... price of $145.00 includes postage in lower 48 states ... actual...