MTFCA Forum

Hello,
My 26 touring has been losing juice intermittently from the magneto. Sometimes it runs great on the mag and sometimes there is nothing. I am planning on taking the contact out and cleaning it well tomorrow. I reckon that I will also check the wire for any bare spots while I am at it. Just wanted to see if I should be looking at anything...

DEA6A516-818D-4DE1-A9BE-CD2B36232E4A.jpeg CBAA22E0-AEB4-4487-936C-FAB43225A5B3.jpeg B24EBEB2-45C6-4C27-A52D-DC7DBF614211.jpeg D96DA67C-4019-4D8F-91FD-A69D8ACC8B7B.jpeg

Here’s a T center door going down a San Francisco hill around 21-22. It looks like the gas lever is all the way up. Was he coasting and using any braking or?? It looks like the T is new or close to it.

Hi all,
I took my front springs apart and marked each one on the front. How important is it to replace the spring exactly as they were when all together? Would there be any benefit to put every other one backwards? Or, put the pack in the same order but all facing backwards as opposed to the original way? Thanks in advance.
John

1926-27 Clutch Pedals. One rebuilt with a pressed in steel slow speed fitting. The second pedal has the slow speed fitting brazed in and needs finishing and a new shaft. $50.00 for both pedals+$22.00 shipping. Check or money order. Email me through this site. C1.jpg C2.jpg C3.jpg C4.jpg

I am just about to build my new wheels and while everything is apart I would like to fit a drive gear on the right front wheel. Towards that end, I am looking for a correct Stewart speedo drive gear for a 30 3 1/2 wood wheel. I believe this image shows the correct one. I am looking for one in useable shape. Let me know what you have and what you...

1926-7 Scandinavia trans bands. New in the box with rivets. $65.00+$15.00 shipping. Check or money order. Email me through this site. S1.jpg S2.jpg S3.jpg

1926-7 Ford Detachable Ear Transmission Bands. Bead blasted and painted. Excellent condition. $75.00+$22.00 shipping. Check or money order. Email me through this site. B4.jpg B5.jpg B6.jpg

Looking to buy an oil can & bracket for my model T.

I'm looking for an email for Wayne Atkinson of Idaho (as of 1996). More specifically, I am looking for him to see if he has a clearer copy of the 1996 January article he wrote for New Secrets Magazine . My only copy is blurry... It's the one about air flow in various T parts.

Looking to get in touch with Rick Rodda, does anyone have an email address of his that they could PM me?
Thanks

1926-7 Ford Detachable Ear Transmission Bands. Bead blasted and painted. Excellent condition. $75.00+$22.00 shipping. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg

My son has just moved from the Bay Area of California to near Lewiston Idaho. He has a Corvair Ultravan. This is a small camper built by Chevrolet Corvair. He says it has a 30' wheel base. Do you have anything which can haul a vehicle like that. It is in running condition so will not need to be winched. However it is about 900 miles and not sure...

Where can I find the list of Model T parts suppliers that used to be on the website?

I'm in need of a single contact, spring loaded plug - see photos. Glad to pay your price if dimensionally correct and threads not stripped out of the side hole - it's a 6-32 - the other side hole is to insert the wire and it tightens from the top.

1909 Kingston 5 Ball Carburetor. This model was used up to June of 1910. Is complete but has no float. No visible cracks.
Asking $1500.

Any chance there is someone that has a Watts clutch they don't want and would willing to part with?
Thanks.
Craig.

Model T High Boy Radiator for Sale, $100 Or Best Reasonable Offer.
Prefer Pick Up In Ct.

Here is a wood band set. It is a narrow band set, pre 25. Sorry no rivets, came in an estate sale. Don’t know who made, but not home made. $25.00 + shipping. Email me at address in pictures. Thanks Dan
7D15343D-E21A-491A-AA38-9E1C02C6A4E2.jpeg
65824DDA-9499-481D-ADFF-18612381C59A.jpeg
F352DF30-1FEE-484A-BA50-51D55E58762B.jpeg

Here is a pre-1915 brass Holley G carburetor with the Patent Pending top cover plate. Came from an estate Model T parts collection. Looks like a good rebuildable core.

$75 plus shipping in the U.S.

1AD4E5A2-F2ED-4A31-ACFC-09BB69A99224.jpeg

3A101853-E50E-4B6F-B42D-413BA561DCFD.jpeg

54F93929-FDAF-4F4B-9C87-84AFE7E2DC01.jpeg...

When I installed Rocky Mountain brakes on my 14 Touring car I noticed the brake rods were very close to the running board truss rods. When I push on the brakes the two rods get so close together that they often rattle together quite loudly. I really don't want to bend the rods so I have been thinking about splitting a rubber hose and covering one...

I am looking for an exhaust cutout for an exhaust whistle on my 1922. I would prefer an original cast iron one in decent shape to go on a car.

Here are some 13/14 rear end housings. $185 a pair pickup only. Zip 35173. Email me at address in pictures. Thanks Dan
AB442FF6-F9B4-4237-A2E3-8D773E2E1E76.jpeg
8F8EFCE4-D409-49A4-96B5-77A6A7771F5C.jpeg

I received a new radiator for my T and installed it. I have only driven car since maybe 30 miles or so. Recently I was looking under the hood on left side and discovered the overflow tube broke loose and just hanging from the tank on top. Also the old radiator had a couple ears toward the top where a couple screws went though the shell to support...

In more ways than one ! Looks like the rear seat in this 1913 touring is holding up well under stress !

This carburetor came from an estate collection of T parts so I have no knowledge of its condition. From what I can tell I think it’s a 1915 style. Has the December 1914 date on the cover plate. The throttle shaft is pretty loose in the bore in the body. The body could stand to have a bushing installed. Otherwise looks pretty complete.

$100 plus...

Here’s a photo of the entire Oklahoma fire dept. That’s what it says on the photo anyway. I don’t see a T in the Fire dept cars or trucks. Maybe they didn’t want one.

But there is one T in the photo. Maybe 2 ? Maybe the city wanted a better car? Interesting!

Nice side lamp, from what I can tell possibly 1916-1917. Not completely sure. No major dents. Glass is cracked.

$65 plus shipping in the U.S.

51CB5DDD-05EC-41BF-A849-8B91AA885CCC.jpeg

263C1033-AA27-4DE7-9B69-3C35850C3788.jpeg

18B2F804-5D7F-44B1-9553-A2A664838AB1.jpeg

3EC39390-5999-48F8-9662-55938C30A85B.jpeg

For Sale 1910 Kingston 5 Ball Carburetor. Excellent Shape $1500.00. Call John 352-256-7234.

At the bottom of the page.

WHO IS ONLINE
Users browsing this forum: StevenS and 0 guests

For sale: 2 Ford JNO Brown Model 110 side lights. Black and brass $500 or best offer plus shipping
the last picture has some reflected stuff sitting nearby
20220709_170228.jpg 20220709_165803.jpg 20220709_170017.jpg 20220709_165819.jpg 20220709_165849.jpg

Nice 1914 Nonpareil brass horn. Has several normal small dings but no major dents. The rim is mangled and cracked in one place. $150 plus shipping in the U.S.

3A6A9343-8A84-42C8-B01E-658141F568BB.jpeg

E2F9DDD7-74EC-4028-82B6-0992B2BD3E3D.jpeg

A683227C-EE28-4071-AF58-BE626FE30A02.jpeg

26D46450-0E65-46F5-844A-D1C998FC473D.jpeg

I am working on my 24 Touring and having done a rebuild on engine with a neoprene crank seal, I still see a drip under the front of engine. So I thought to add an additional external seal and want to know if anyone else has done this using an aluminum belt pulley and your technique in doing this. Your thoughts are appreciated!

Here is a set of new valve washers. $6.00 + shipping. Email me at address in pictures. Thanks Dan
50263938-E41F-4362-B1CF-48A30226E756.jpeg
C4A8BA96-8F67-4629-BC2A-6BE8FC29AF47.jpeg
A5AF0471-2820-48AA-BE00-B2BA5A1849E0.jpeg

For Sale: 10 tooth pinion gear . great condition, marked Ford . May be NOS. $150., includes shipping in US only. call (248) 894-75fiveone. Thanks, Walt

20230126_142751.jpg Bought this 25 Coupe today. Going to need some engine work. Engine was good running good for last owner but broke a couple magnets. I'm assuming the field coil is going to be a mess. Previous owner removed the rest of the magnets. He bought a set of splash angles but decided not to finish the project. Debating whether I should...

Here is a valve Lapper. See pictures. $15.00 + shipping. Email me at address in pictures. Thanks Dan
9DBF24C2-363E-4CD0-9D21-2A0BE77493CA.jpeg
F4068FB0-F284-433D-8BB8-38F9B69915F2.jpeg
A3E6861B-7EA4-4059-B64C-55DE59018CD7.jpeg

I got two early NON Starter Transmissions FS. You know what I know. They are all there. I put a tape on magnets look to be 3/4”. $100 EACH PICKUP HERE. Email me at address in pictures. Thanks Dan
73342502-B788-45BF-923C-5B1A4749A84E.jpeg
8256C0A9-F481-4E1C-894D-5FD674D008AC.jpeg
18F9D9A3-FF4F-4742-B9B4-E9E04F3EBD92.jpeg...

I have added a link to Darren's car in our Video Link section of the gallery:

Also added is a link to a simple tear down of a T engine and Transmission designed for the layman to explain how it works.

We don't have copies of the videos on our site, rather these are links to Youtube or other sites where you can actually watch the action.

The...

What body style is on this T truck? Its really growing on me!

I still have some Ford Script keys.
I have all numbers except number 55, while supply last.
$8 ea. includes shipping in lower 48.

Please pm.

Thanks, fordrelic

I'm looking for a low drum gear in excellent condition. I will be running riveted triple gears which have wider teeth than the one piece gears. The low gear must not have any wear step in the teeth. A nos gear would be ideal, but very nice used will do. I do not care about the condition of the drum, if one is attached to the gear. I'm using all...

Coil box part for rebuilding. I believe it’s 26/27, no lid.
The metal seems solid with good bracket.
Make offer
Scott Elliott
971-5O6-94O2

Rusty but solid. Has passenger side fender bracket still attached.
Make offer
Scott Elliott
971-5O6-94O2

Just got a call from Smith and Jones about T copper head gaskets. They have them in limited stock now. $42 each. Maybe the other dealers have them too and this is old news! I was told the quality is very good. Got 6 coming my way.

Even though Steve Jelf created some great directions on setting your Model T timing over at ,
I thought I would splurge on the Timing Indicator with LED kit that the vendors supply. It is supposed to make it easy to find the 15 degrees ATDC.

Video Review Link:

Let me know your thoughts here or in the comment section of the video!

I'm trying to help a friend get his firewall on his '14 installed correctly. I don't feel like pulling anything from my cars to answer his question. So here is one that I believe maybe true. Is an early 5/16 running board bolt the same one that is used for the frame to firewall brackets, 3 on each side. If this is correct, I think Randall Anderson...

During a recent outing, we came across a T touring sitting in a barn yard. The older owner has been ill for about three years. A club member bought the barn yard car. The family is selling the remainder of the collection. There are 3 cars left, commercial hack, 26 touring and a 21 roadster pick up with wood bed. All cars have been sitting in a dry...

Why does the model t tips website ask for a username and password?

I have 2 Jno Brown 19 head lamp bodies for sale. Believed to be repop spun bodies. Unused. $90 each plus flat rate shipping.

Ash Wire Wheel Collection: 1- complete wheel; 6-wheel rims; 11-wheel centers; 7- lock rings; 2- front hubs; 2- rear hubs; 1 set new lug bolts; 1 set old lug bolts; set of 5 new brass hubcaps; set of 4 old original hubcaps; spokes and nipples to re lace wheels.
$2500 + ship or can deliver to Turlock or Tulare swap meets. DSCF8716.JPG DSCF8715.JPG...

A couple years ago I bought a T that had a set of Firestone Polonium spark plugs in it. They seemed to work fine but I eventually replaced them and put them up in a cabinet. I came across them the other day and was curious to know if anyone knew much about them. Are they a better plug by being radioactive or was it just a gimmick?

-
1915 Ford Touring
Larry Blair/ Tin Shed built engine w/ Scat crank and aluminum high compression head
Ruckstell two-speed axle, rebuilt by Norm Kling w/ new axles.
Rocky Mountain Brakes, relined by Andy’s Garage
New flat tube brass radiator
Solid wheels
New Classtique top
Speedometer
Year of Manufacture license plates.
Magnet mounted brake &...

No glass, just the bezel. 25.00 p.p. ctleonard64@gmail.com IMG_20230127_092530796.jpg IMG_20230127_092518502.jpg

I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You

Daniel Snell
Danielsnell2@twc.com

50.00 for all 4 plus shipping. ctleonard64@gmail.com IMG_20230127_075621073.jpg IMG_20230127_075557285.jpg

Lot of 2 steering wheels. Both 17 OD. $50.00 for the pair+$20.00 shipping. Check or money order. Email me through this site. w1.jpg w2.jpg

Here is a NH Straight Through I got in a bucket of carbs in Estate Sale. Looks complete, but someone brazed the gas inlet elbow in it. I blasted it to clean it up. Look at pictures and decide for yourself. $65.00 + shipping. Email at address in the pictures. Thanks Dan
98552630-C7D7-4201-857E-84F6066EC3DD.jpeg...

I am certain the package shelf can be removed to give more leg room. From the photos I have seen this would involve moving the gas tank back along with the seat riser and then reconstructing the seat back support. I know its not a project for everyone but at 6'3'' its worth the effort to get an additional 4 inches or so.

Any photos of the seats...

Thought You Should Know ..,.

@

FJ

All fan blade rivets are tight. No visible cracks that I can see. Covered with quite a bit of grease. T-603 pulley with T-8756A bracket. Spins freely.
$80 plus shipping
Scott Elliott
971-5O6-94O2

AC speedometer gear with mounting bolts and sleeves.
Make offer
Scott Elliott
971-5O6-94O2

Is anyone still making floorboards ,i need a set for my 13 touring project

Anyone have the measurements of this by chance? I have an older set of Rocky Mountain brakes I would like to update.

1911 Stewart #22 wheel gear $85.00. 1911 hubcap wrench, $200.00. 1912-13 front timer cover, $80.00. Aluminum timer with resurfaced contacts $40.00. NOS new day timer with used brush, $50.00. 4 brass headlight burner stands with elbows $80.00. KW 1913 coil box switch with original key, $85.00. All plus shipping. Kdmks AT att.net.

For sale is a 1911 Kingston coil box with the original metal top coils. These metal top coils were only used in 1911 and this is the only one of these units I’ve ever seen. As you can see from the pictures, it’s very complete and in excellent condition. $1200.00 postpaid to lower 48 states. kdmks AT att.net.

I wanted to reuse the original rain gutters from my coupe, but I have not been able to separate the two pieces. These are shown in the first three photos. I have purchased new aluminum gutters shown in the last two photos.

The primary piece of the original gutter was held in place by tacks. I appears to me that the secondary piece, witch covers...

While cleaning out a few things this afternoon I came across this tap. It is marked STEVENS NEW YORK and is before the change/addition of the Walden Worcester to the logo. It is marked 1/2 14 and it measures out as such, 1/2-14. The only thing that I could think of or come across is the tap for the T-201 Oversize Tap and Bolt Set for Ford Cylinder...

Looking for picture-instructions for Gray Davis Starter have one that was on a 1914 T the Chain that goes from starter to Crank is missing looking for chain or something to see what it looked like Thanks Matt Madison 503-824-2681

I am looking for a 1913 0r 1914 body to build a Runabout Give me a call or send e-mail with pictures and price with contact number
Dennis 401-932-3191

No connection to this posting. Just thought there might be some interest here in Lizzy Land

CL shriner t.jpg

The latest 'T' picture from the illustrated history of WW1 I have been wading through (more volumes still to read through yet).

Here we see a gathering of British T Ambulances, possibly newly delivered to the front?

Untitled.jpg

i need one upper and one lower body to firewall mtg plates ,anyone have anything?

Jno Brown Model 540 Ford-O taillight. $60.00+$17.00 usps shipping. Check or money order. Email me through this site. b1.jpg b2.jpg b3.jpg b4.jpg

Jno Brown Model 560 tailight. $50.00 + $17.00 usps shipping. Check or money order. Email me through this site. bb1.jpg bb2.jpg bb3.jpg bb4.jpg

1911 - 1912 to early 1913 Model T Frame - Very good condition. Is sandblasted, primed and painted. Has rear fender brackets on it. The running board support rods are also there. More photos available.
Can deliver to Chickasha, Ok or Luray, VA swap meets in March and May.
$1200.00 or OBO.

SOLD
Original large funnel inside oil tube, looks to be in great condition. 35.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

I am trying to respond to a few e mails on the forum and all are getting kicked back, never had this happen before, anyone else having issues, Bob

I was told this is for a 1915-16 but nothing to compare it nice and sloid will beed the river or pin at the bottom replaced measures about 31 1/4 long.
oval bow
35.00 plus postage,
Bob
815-633-7244
modelt2001@comcast.net

1913 touring adapted for service. It looks funny without a windshield. They could have used a runabout, but hey, the back seat was gonna fall off anyway. :lol:

Hi, I am looking for these body irons, not the rests, just the part that attaches to the body under the upholstery.
Thank you.
John
akrendo@gmail.com

cool video, how much is correct.?

Early transmission drive plate assembly, has Ford in block letters, shaft is good will need plug
30.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

nice pair of garnish moldings might be for 1926-7 nothing to compare it with see photos
50.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

Looked everywhere for acetylene line brass tee, then saw where Keith T. posted a photo of the one he made. Here's mine...Thx Keith.

Nice brake pedal for 1926-7 the shaft looks good outer threads look good inner threads will need chasing or just replace the shaft 35.00 plus postage, Bob
815-633-7244
modelt2001@comcast.net

Brass hand pump made by Lunkenheimer and new pressure gauge $95 for the pair. Domestic shipping $10.

For sale is an original copy of the October 15, 1917 Price List Parts and Accessories for the Model T. Rough shape and shows its age, but would be a great addition to a Model T display at a car show or framed in the man cave. $50.00 domestic postage paid, actual cost for overseas mailing.

John Schroeder
Delafield, Wisconsin

Helping a fella locate wood plans for a later Runabout - I had a collection of Miller plans but alas, I must have sold it or borrowed it out and it never came back !

I have a cracked Drivers side window and need to replace both windshields. I have a 1924 Coup. How or where.. do i go to get this glass?

Trying to cover all basis. Have 32 roadster looking for top bows and irons. Any help appreciated!

Wanted - one or two good felloes for 30x3-1/2 wheels

Here’s a high end Model T roadside camper set up