MTFCA Forum

8 pcs. A few of these are in pretty good shape. $20+ shipping for the lot
Enjoy Your Day!
Sevenl9 - 89O-four837

Was the gas tank cover in 1918 stamped metal part? Any body have one available or at least a picture of one in their car. Mine has a piece of plywood, not correct.

How in the Sam Hill are you supposed to separate new best rod shim packs between layers? 20-30 years ago I used to be able to do it easily with a box cutter blade or even a pen knife blade. But these newer shims must be held together with a space age adhesive that would hold a rocket ship glued together sent to the sun! I have tried various blades...

IMG_20250705_145326.jpg

My old friend turns 90 today. Happy birthday Glen.

Well, here is my latest bring home item.
M37 remnants
Will probably resell at some point but i just literally saved it from going to the junk man, still has the transfer case and such. Extremely rusty ,frame stretched,

For sale- Nickel plated Bermuda bell, rings nice and loud. The nickel plating has some imperfections. The top plate and button are not original but look nice. $200 + shipping

F03D0384-2966-42DA-B686-082432646496.jpeg

1E49D5D1-ACE0-4F0A-90BB-5BE49D1CF463.jpeg

Thanks, Gary

Does anyone have an alternator on their T? Buckeye sells them and states this on their website about them:

The 12-volt version is capable of 80 amp output; the 6-volt version is capable of 40-amp output

Model T's only have 12 AWG wiring in the charging circuit... and its 100 year old wiring to boot, nowhere near the ability to handle that kind...

Hello!

This a a broad question, I know. Locally there is a very nice Model T Haywagon conversion. Looks well built and stored indoors. It has wood spokes, and a real period conversion kit for the tongue (not a hack.job). While I don't see my Tudor pulling it, it would be a dandy wagon behind the Farmall H for our maple sap collecting and...

I have an improved car outside door handle with a broken, rusted spring behind the escutcheon plate. Taking it apart to replace the broken spring was easy, I just had to grind/file the crimped shoulders behind the spring retainer to remove the retainers and the broken spring from the square shaft. Putting it together is easy until it comes to...

Two cast end mufflers with 8 1/2 pipes. No longer reproduced. Take your pick $250 each plus domestic shipping. Mark Chaffin (951) 805-0928.

20251117_141122.jpg

20251117_141048.jpg

Early style timing cover plate. Later early style which allows the use of a modern camshaft seal. Price is $45.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_101442.jpg

Looking for Ford Script 21 spare tire cover in Black.

Jack Leonhardt 920-226-1005 or 26modeltt@att.net

One set of Bob's Antique Auto adjustable lifters NORS. Standard size. New sets retail for $105. Get these for $75.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251118_152758.jpg

3 really nice valve stem caps. Unfortunately I don't have the rim nuts the original nickel is in great shape! I hope someone can match these up and complete a set! $30 plus the ride
Enjoy Your Day!

Just passing this along.
IMG_0598.png

Yanked out the handbrake lever today.
Having restored a '25 decades ago, now that I'm cleaning up a '14 I'm constantly amazed at all the engineering differences I'm finding between the two. Some things you see improvements, while other things changed became cheaper quality (obvious cost/time cutting, but as such also not as strong). I know this is...

NOS band lining sets. Narrow drum 09-25. Two sets available. $40.00 each plus $8.50 domestic shipping. Mark Chaffin (951) 805 0928

20251117_151317.jpg

Pan support bracket set $35.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_132843.jpg

Coupe, Sedan and Truck brass side light bracket set $35.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_133538.jpg

Nice 2301 Stewart drive gear 16Tooth 8 pitch. NOS? The dealers are $32.95 + shipping, how does $28 delivered in the states

For the past 60 years, six antique car clubs in Portland, Oregon have held the Always in April Portland Swap Meet. I am pleased to announce that we will have it again April 10, 11 & 12, 2026!

However, with online classifieds, T-bay, and various internet sales, our proceeds are currently only about 20% of what they were ten years ago. The swap...

Early Holley Two Screw brass carburetor. Looks nice and complete. Shafts snug. Great for restoration. Price is $175 plus $17.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_101022.jpg

20251118_100952.jpg

20251118_100936.jpg

These are unobtanium. Very nice complete set. Price is $100 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251118_101057.jpg

I need to exchange 4 wooden spokes for a rim with wooden spokes. The spokes are longer and a bit narrower than the regular ones. The 5/8 tenon ist longer 0,9 inch) than regular ones. Where could I get one, I could not find them at Langs or Snyders.
Thankfully for your help
Bernd

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other one. l don't think they have ever been used. dealers are asking $36.95 + shipping. $60 including shipping.

Enjoy Your Day!

One very unusual aluminum carburetor with early aluminum intake manifold. Price is $100 plus $17.50 domestic shipping. Mark Chaffin (951) 805-0928

20251118_103039.jpg

20251118_103100.jpg

Ok, here comes the can of worms…. I am going to put new linings on the bands for my 26 speedster and it sounds like I will be getting into the bands on my 22 as well. I have full sets of Kevlar and good cotton bands for both. I like the longevity of the Kevlar, but I also like the lowered risk of transmission damage from the cotton. Anyone running...

Greetings,

A gentleman near me is looking for a mirror for his touring car. One like or similar to the one in the photo on page 155 of Bruce's book. I've also seen round and rectangular ones, which might work for him as well. I assume this style of mirror clamps onto the wind shield frame like the modern reproductions the suppliers sell. He is...

So the coolest thing happened a few months ago. I was formally invited to attend a local Great Gatsby Gala Ball. :D
The coolest part - I was specifically asked if I would put my Model T on display in the foyer of the Club where this is to be held. This will be the first time my Model T has been indoors , aside from the shed she lives in normally...

I found this device in my 1909 Roadster and I do not know how it works. Mag cable comes from magnetoposg.
Could someone please explain?
Regards
Bernd

Cowl tank access door. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251118_101459.jpg

20251118_101511.jpg

Are there any opinions on how long a 6 Volt Group 1 Battery should live, if it is seldom used, but left in the vehicle, or which battery is the best??

On the back cover of the current Model T Times, is probably the rarest 1925 Ford in existence. I most likely was sold new as a non starter model. If you look through the L R spokes, it appears there is a battery. I have only seen one example of a 1925 non starter car in 60 years in this hobby. Note the wheels are non demountable, with 30 X 3's in...

I have the following Vintage Ford magazines for sale.
35+ issues total. $40.00 for the lot plus shipping at cost. Many have T speedster or speed equipment articles if it matters!
PM or e-mail to dmcgearsATyahooDOTcom
thanks!
Adding a few more to the batch: a few duplicates but.................

Volume 6:6
8:2
9:2
9:3
9:4
9:6
10:1
10:2
10:3 x2...

Early KW coil box complete with early coils. Price is $500 plus Domestic shipping. Mark Chaffin (951) 805-0928

20251117_152407.jpg

20251117_152424.jpg

20251117_152531.jpg

20251117_152501.jpg

Early running board bracket set with thick cross rod tabs. Price is $100 for the set with free Domestic shipping included. Mark Chaffin (951) 805-0928

20251117_111226.jpg

I'm about to start a frame up build and am need of a good ignition switch and key.

Let me know what you have.
Thanks Todd Touchberry

Today I spoke to the manufacturer of Model T Ford ignition coil point sets and supplies them to Model T parts vendors.
As reported in mid-September the supplier of the four basic coil point stampings is still having problems sourcing the raw brass and steel to make these parts. At this time, there is no delivery date for the material needed.
The...

Heat shield between exhaust and floorboard?

What is anyone using?
I have plenty of scrap stainless I'm thinking about using.

I have reproduced the Lejay Hi Ball Fencer charger kit.
It will make a great addition to your workshop and a great conversation piece.
The kit includes all new parts and full instructions for assembly.
The DIY kit IS $29.95 plus postage of around $10.00
The complete unit is available for $64.95 installed on your coil. Your coil will be refinished...

Zenith carburetor looks good still has the float inside, not sure what it fits. $300 plus shipping est. $23.00
Best way to reach me is Text or call 423_284-97fifty. Check or postal money order only.
IMG_3428.jpeg IMG_3426.jpeg IMG_3429.jpeg IMG_3427.jpeg

Early brass sediment bulb with Ford scripts. Arm is snug and turns freely $75.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251117_105030.jpg
20251117_105047.jpg

-
In the loft of one of the many buildings at the Gilmore is Model T Ford serial number 131. This is a two lever, water pump equipped Model T, one of the earliest known to exist today. The tires are covered by vinyl covers intended to reduce the graying effect of sunlight on the tires. Note the linoleum covered wooden running boards with brass...

Decent brass orignal brass rad will need some repairs. Lower water outlet has several holes I have a replacement that will go with it. I did fill it up with water usual mouse nest in the top tank but seems to hold water well for being over 100 years old. $300 plus the ride would prefer local pickup located pleasant prairie wisconsin

Nice zenith o4 carb for rebuild complete a little stiff nice float 200$ shipped lower 48

What are the road rules for Model T's and other vintage cars in the state of Pennsylvania? May be moving there someday and Id like to know what I have to look forward to.

One 26/27 rear spring perch set in excellent condition. Very good sets are extremely hard to find. Price is $75.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251117_133002.jpg

Not Model T; however, folks here likely collect hit and miss engines as well. This is a Webster Tri-Polar Oscillator in excellent restored condition. Price WAS $400 NOW $300 plus $17.50 domestic shipping. Mark Chaffin (951) 805-0928

20251114_163417.jpg

20251114_163431.jpg

Frame brackets that the body to frame brackets mount to.
$20 for all plus shipping.

IMG_3969.jpeg

New brake quadrant
$15 plus shipping

IMG_3917.jpeg IMG_3916.jpeg

This a black and brass tail light. The body of the lamp is in real nice shape the chimney cap has some dents etc. The font looks like there was a solder repair. Missing the blue lense. Burner in tact and in real nice shape. Excellent candidate for restoration or a perfect piece for a unrestored original. $75 plus shipping

Thanks!
Mike Bird...

Steve has moved out of his house and into Winfield Rest Haven.

If you wish to call him or send him a card he would be most appreciative.

Five original late style engine funnels in very good condition. Reproduction funnels are $75. Get all five for $200 plus $17.50 domestic shipping. Mark Chaffin (951) 805-0928

20251117_102120.jpg

20251117_102103.jpg

20251117_102206.jpg

One pair of front shackles. The shackles appear to be NOS with Ford script. $75.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251117_105339.jpg

Late rear shackle set. Shackles appear to be NOS. Ford script. $75.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251117_105325.jpg

Wanted to buy either a new or old battery carrier that mounts on the frame, T part # 5150.

I did a major reorganization of the shop today that involved moving the 22 to a different bay of the garage. I was able to back it out of the garage but when I tried to back it up the very low slope of my driveway reverse was slipping. It has Kevlar bands in it so I am not sure what is going on. Reverse has always been a bit loud in this car so...

Looks like a good rebuild candidate, I haven’t taken this apart…$125.00 plus shipping. EST $23.00
Best form of contact is Text or call 423-2eight4-97fifty. Check or postal money order Only.
IMG_3425.jpeg IMG_3424.jpeg

Set of bracket’s or body irons. $50.00 plus shipping cost, est.$23.00. Note one early bracket with small top saddle
Text or call is the best form of contact to get ahold of me. Check or Postal money order Only.
423-2eight4-97fifty
IMG_3431.jpeg

Set of bracket’s or body irons. $50.00 plus shipping cost, est.$23.00
Text or call is the best form of contact to get ahold of me. Check or postal money order Only
423-2eight4-97fifty
IMG_3433.jpeg

Set of bracket’s or body irons. $50.00 plus shipping cost, est.$23.00
Text or call is the best form of contact to get ahold of me. Check or postal Money order Only.
423-2eight4-97fifty
IMG_3432.jpeg

Hi, I am looking for the brass date badge that holds a AAA emblem or an NMA emblem (National Motorists Association) to the radiator.
I have attached a few pictures of what I am looking for. I am particularly looking for the 1928 date badge. I am willing to trade one of my extra date badges in exchange for the 1928. Pictured is a 1932 date badge....

A fella here is looking for a pair of headlight lenses for a 1913. Grateful to any who can supply.

WTB original amp meter in good working condition to fit the larger pre 26/27 dash plate

WTB Finned Aluminum Transmission Door, seems the vendors no longer have them. New or used, prefer something with some patina so used would be great. Sorry for the poor picture. Thanks
467F066D-025B-4CC4-9311-4052F33073E1_4_5005_c.jpeg

IMG_2554.jpeg IMG_2379.jpeg IMG_2557.jpeg IMG_2543.jpeg

For sale: Transmission driven gear puller Ford script 5Z326 $200 plus postage

I just picked up some Model T parts and there were 4 23 inch rims but they have 5 lugs. One of the rims has a Buffalo Cord Dunlop 31X4 smooth tire on it. Are these for Model T rims? All the Model t wheels i have are 4 lug

How do I get ahold of the guy that makes new transmission brake drums? I want to buy one for my speedster project

thx

frontyboy

How do I delete photos that I put on my profile page? Can’t seem to find any way to do that.

Friends,… I’ve researched to the best of my limited ability to find Accession ‘scriptures’ on the I Net - to no avail. Specifically I/we should be interested in production changes during the Model T era. How difficult must it be to computerize this ? Or has it already been done ?

For Sale Reproduction Early Model T Transmission Door Cover, Note no Made in USA. Currently no longer made. Asking $110 includes shipping to Cont U.S.

FS: A Holley Model G carburetor, in barn find condition. Cast iron body with brass top. The choke and throttle are not seized, and I don't see rust-through on the bowl. Asking $25 not including shipping.

THG01.jpg

thg02.jpg

thg03.jpg

thg04.jpg

Thanks for looking!

A Maxim accessory electric horn with a brass bell. 10 long by 5 diameter. Has its original bakelite wire knobs and mounting bracket. 6 volt. It honks. Nice condition. Price is 110.00 INCLUDING shipping in the USA via FedEx Ground. I do not answer messages posted here. Call me at 734-730-4274 or email directly at motoringicons@hotmail.com Thanks

Good Afternoon1
I am working on a '16 touring car. Frame off. I cannot find info on the reassembly. When I lifted the body off of the frame I found 1/4 inch rubber pads at the bolt sites. My main question is do the splash shields mount between the body and frame without the rubber pads?
Are the rubber pads on top of the frame or between the body...

Free (You Pay Shipping) used inlet and outlet castings pulled from junked radiator cores. A couple of them are OK, two of them are badly pitted and will have to be brazed. They are yours, just pay shipping.

tradcs02.jpg

Or if you prefer, here's a couple of rough brass-bodied Kingston carburetors, one's an L the other's an L4 if I'm not...

For Sale, Transmission tool by Star Tool Co . Tool is used to hold the three narrow bands together, on the early transmissions, when replacing the hogshead (transmission cover). Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale, early starter Bendix puller 3Z4712. Dealer tool. Threads are in good shape. Price $80 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

For sale transmission clutch drum puller. Dealer tool 5Z314. Threads are in good shape. Price $80 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

For sale Transmission Driven Gear Puller. Dealer Tool 5Z326. Threads are in good shape and bottom disc rotates freely. Price $80 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

I have a completely rebuilt engine and transmission that I don't need. Serial number 2347110. $4800.00.
Located in Kandiyohi MN. Pm or email me with any questions. I can help with shipping via Fastenal or other carrier.
Mike Peternell

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

IMG_9657.jpeg I’m planning to run make a shim unless I hear different.

Picked up a project, pulled pan to give it all the once over and clean out the junk that made it into the block over the years.

Found the from con rod cap had a loose bolt. One one side, about 1/2 turn from snuggling up, I could wiggle it back and forth. Pulled the cap and...

Left and right 09-10 Rear halves, $2200, other pictures, can deliver to Hershey. Lots of other early 09-12 parts, what do you need? CM 30-40

These came as a pair with a load of Model T parts. Look to be valve chamber covers? Anyone know what they fit? Thank you

20251114_162845.jpg

I’m amused by how inflation through the years has disconnected us from our perceived values and the price of common items. I noted recently a vintage photo dated 1939 showed a car in a filling station, the price of gas was twenty cents per gallon. Posts made in response made much of twenty-cent gas, obviously wishing it still sold for that....

of UNRESTORED Hayes front wire wheels. IMG_4307.jpeg

These have been slow but steady sellers and I still have a dozen or so remaining from my last production run. I do not intend to make any more, so when these are gone, that's that. They will be but one more thing you didn't know you needed but someday will wish you had. Most people will make do with a screwdriver for wood screws, and then after...