MTFCA Forum

I sent an email to one of the Officers (Don't remember which one) wondering who i s the ninth Board member. No response. Now I'll ask all of you, is there one? If I hear from no one, Ill have to go back to my old records and check it out. TIA

FS: A Holley Model G carburetor, in barn find condition. Cast iron body with brass top. The choke and throttle are not seized, and I don't see rust-through on the bowl. Asking $25 not including shipping.

THG01.jpg

thg02.jpg

thg03.jpg

thg04.jpg

Thanks for looking!

Ok, I know this magneto has 2 more terminals for this crowd, but there might be an early six cylinder person that needs one. Brass base. Has the original Bosch bakelite knobs. Clockwise. Gives a good spark when you spin it. Good condition, complete, not tampered with, etc. A good magneto. Price is 495.00. Call me at 734-730-4274 or email me...

Vanderbrink Auctions has an online only estate auction coming up in Montana It has lots of early stuff with some Model T cars and parts cars. Other early cars. 1909 REO is oldest to 1960s era with some later stuff. A huge auction with a good selection of cars, trucks, tractors, hit miss engines and other unique stuff. There is a 1915 Couplette...

Completely disassembled and cleaned, viton tipped float valve, tested float, new choke spring and ID tag, test run
$185 postpaid to continental USA email: wlkma9@gmail.com

I’m helping an Indianapolis area gentleman sell his Hill Climb Speedster. Don is an accomplished machinist and everything he built for this car was to keep it as light weight as possible. It’s built for the Newport Hill Climb in Newport Indiana. He said it weights around 800 lbs. I’m sure it could be converted for other uses as well.

He recently...

For Sale: Two model T headlights.

$50 for pair, plus shipping

71st Long Beach Model T Club Swap Meet is coming fast! Saturday July 19 at Long Beach City College Veterans Stadium 7:00AM. Visit lbmtc.com for flyer, registration form, or details. Don't miss one of the oldest and best Model T, Model A, and Old Ford swap meets in the West!

71st Long Beach Model T Club Swap Meet is coming fast! Saturday July 19 at Long Beach City College Veterans Stadium 7:00AM. Visit lbmtc.com for flyer, registration form, or details. Don't miss one of the oldest and best Model T, Model A, and Old Ford swap meets in the West!

Pair of front hubs and matching hubcaps for Budd wire wheels 30 x 3 1/2 size. Matched set left and right, good threads and caps. Off an Overland and readily converted to Model T Ford axles either front or rear. $325 for 4 pieces. Please respond thru MTFCA message system.

One of our newer club members that lives in Baltimore, MD needs a complete 1926 Roadster Top Frame.

Email Jim Golden for more details.

Box full of generator parts unknown condition asking 75 or best offer plus shipping please call or text 2036873827

For sale Haynes rim $100 plus shipping

20250324_141159.jpg 20250322_184948.jpg 20250322_184855.jpg

Completely disassembled and cleaned, new venturi, float, choke spring, viton tipped needle and seat, throttle shaft bushing installed, test run. $600 postpaid to continental USA email: wlkma9@gmail.com

Miniature Ford Times Magazines (measurements: 5”x7”)for sale - (1959 all 12 months) and ( 1957 October, November and December)
All for $20 plus shipping. IMG_6389.jpeg IMG_6390.jpeg
Call 740-398-4358 for more information.

Wanted Dayton number 3 knock on hub cap as in photos. Plan on making a pattern to cast them for my Fronty Ford. Any help appreciated

Thanks

Mark

359246 10-08-2011 Dayton Knock Off Hub Cap.jpg

2018-03-10 Dayton #3 Knock Off Wheel Caps 027549.jpg

Have made Dayton dental drive #10 caps from scratch before so know the process.

2002-05-06...

Wanted 1915-16 Headlamp switch as in the photograph.

Thanks

Mark

452774 2017-01-16 1916 Headlamp Switch.jpg

For Sale: 14.75 outside diameter.
Cast iron spider.

$150 obo plus shipping

black T wheel.jpg

FS 1922 Canadian model T Touring. New valves, lifters and rods.new top. It came to US from ST Edward Island a few years ago. CALLS ONLY. I can text pics. $ 6000.
Five 1 seven 80 two 0 three one 7.or 5 one 7 6 two 7 5 four 3 zero.

This ad is for the exceptionally rare Buffalo Forge No. 13 bench top drill press, a tool that would look fantastic in your vintage car workshop.

This machine was manufactured by Buffalo Forge sometime in the late nineteen forties, near as I can figure. Other than a bit of surface rust, everything looks great and functions as it should. It runs...

Looking for Lecalite junior headlight lens. Lens rattled loose and fell off car. :cry: I would like to find a replacement. If you have a set of 2 and don't want to seperate, I'll take both.
Thanks!
Lens says Top- lecalite junior - 8 1/8 - pat. 12-12-16, 5-1-17
20250628_203504.jpg
20250628_203512.jpg

WTB: A late 1925 open car dashboard. They look quite similar the the early ones, but are different. The hole for the carburetor adjustment is 1/16 larger diameter, and the indentation is different too.

Edit: my horn is the correct one, another user of this forum elaborated on why it wasnt working and I fixed it. Since I do infact have the correct horn I no longer need to buy one.

I have a magneto horn that has 2 contacts, one insulated from the horns body, the other is not and had continuity with the horns body. My t actuates the horn by...

Pair of used original gas headlamp burners in good shape ready to use. $95 including domestic 48 state shipping. Remember that these are NOT being reproduced! Please reply by MTFCA messaging.

1913-14 riveted rear axle housings with two speed Jumbo driveshaft. It worked well on the car but I think the Jumbo output shaft needs to be shimmed. This provides a nearly hidden two speed while retaining the riveted housing of the early cars. Might deliver to Stettler or pick it up in Great Falls, MT on the way. $500 obo.

For Sale: Several 5:1 26-27 steering columns. You can use the main shaft, the gears, and the steering wheel shaft to convert the older units and improve your steering. I might be able to deliver them to Stettler or you can stop in Great Falls, MT, along the way and pick one up! $150 ea.

Free: A bunch of rusty Throttle & Spark quadrants, along with some gear box tops and some levers and gears. These are pretty marginal - if I had any common sense I'd put them out for the scrap collectors, but I don't so here they are. Free if you pay for shipping.

tquad01.jpg

tstgr01.jpg

Thanks for looking!

for sale: crank handle $25 plus postage
20240619_073658.jpg

For sale: NOS Nylon timing gear $40 plus postage
20241027_100945.jpg

For sale: Front axle with spring perches and bushing $125 plus shipping
20240619_085254.jpg 20240619_085310.jpg

Nice straight bracket w good tail light and lens. $40.00 plus shipping IMG_2191.jpeg IMG_2192.jpeg

Looking for 5 30X3 1/2 tires. Must be a matched set, good enough to put on the road. Not interested in ancient cracked wanta be tires. Something you got for a project and never used type tires. Thanks.

Lot of pin type and a few zirk grease fittings and a couple pin type caps. There are a few nos pin type in the bunch. Whole lot $40.00 plus shipping. IMG_2177.jpeg IMG_2178.jpeg IMG_2180.jpeg

Looking for a pair of 1914 Touring Splash Shields.

Thanks

Tim

A great single axle trailer with hydraulic surge brakes, serious ply tires (new), ramps, extra European diamond plate, just remove the the side stakes and a T fits on it! Pulls like a dream! $1,000.00 you pick up! Has a Tennessee title! four23eight3seven5seven09.

IMG_4702.jpeg

IMG_4701.jpeg

IMG_4703.jpeg

These two drag link end caps have been in my stash forever. One opinion is these pressed metal caps were used very early in production. Another branded them cheap, spurious replacements. What say you?

They show very little wear if any on one of them. They certainly have not been filed down like a lot of the later forged type. 20250624_162119.jpg...

491547185_1571396800223045_4805122552221510944_n.jpg .

Saw on Facebook Marketplace in Lawrenceburg, Indiana. $275.00. Thought someone might be interested,

Continuing with key events in Ford Motor Co. history from 1905:

This is the first public comment/article I've seen regarding the upcoming Model N. The new model is reported to be priced at $400 (came in at $500). While the two horizontal double opposed cylinders rated at 8 horsepower, was off, there are many tidbits here that do make it to the...

Just a reminder for the Put in bay trip for July 13 ,boat is filling up for the 10:00 boat, line up is 9:30, parking at Walmart just a few miles away for rigs. 1:00 is parade , please contact Miller Ferry ahead of time for pre ticket sales so they know how many will be there.
Thanks Joe Bell 419-618-1025

FS: A bunch of misc. parts for accessory Hassler shocks in Barn Find condition:
Rear Dual Spring Bottom Plates for TT Truck $75 ea.
Front Dual Spring Bottom Plate $50 (one only)
Front Single Spring Bottom Plates $20 ea.
Beehive Springs, these seem to fit the fronts $10 ea.
Shipping not included.

hslr01.jpg

hslr02.jpg

hslr03.jpg...

118 years ago tonight, June 22, 1907, Ford race car drivers Frank Kulick and L. B. Lorimer completed a grueling 24 hour race, begun the night before at 10 pm. They drove a Ford Six (Model K, like the one seen on my FB page) to a world record victory.
By 1907, the 24 hour race, held at various one mile dirt tracks around the country, had become...

Reproduction 1909 - 1912 Aluminum Hood with cast steel hood handles. Can be used on later brass Ts. This hood is a very early reproduction that has never been used. It shows no wear from the hood hold downs. Hinges need to be freed up, they move but are stiff. New reproduction ones are $425. This one is $250 plus shipping. Please look carefully at...

New Old Stock Winfield carburetor adapter to fit Winfield Model S or SR size B, 4 bolt pattern is 1 5/8 C/C and the 2 bolt pattern is 3 1/8 C/C. This is Winfield part number S-99B. It is not reproduction nor nice used but actually New Old Stock never used. Winfield catalog says application is Buick 1926-29 and Nash 1929-30. Very rare and useful...

Want to buy a late 1925 open car dashboard. The hole for the adjusting rod is 1/4 , and is recessed further than the earlier ones which use a 3/16 rod.

I have released my latest documentary. This one is about the traffic in Toronto in the 1920s. Lots of Model T content of course! Hope you find it enjoyable to watch.

TorontoTrafficChaosYTThumbnail4b.png

WANTED
Can someone recommend someone who can make a cushion like the one pictured at a reasonable price? Rough dimensions are pictured but I'm no DaVinci. Whomever does the job can use the existing cushion for more accurate measurements.
It's for my 1923 ALF Brockway Torpedo.
I'm in the Detroit area.
Thanks

In need of 26/27 Roadster Side Curtain plans or used pair. Jim

Set of 3 transmission drums for model Ts 1925 and earlier. These drums have been cleaned, checked for cracks by magna flux and have been precision ground and polished. The gears are excellent and tight. Brake drum lugs do show minimal wear. Original bushings are on place and could be used without replacement. This is a great set of original Ford...

I am looking for a couple of loose springs for the nine spring rear axle spring pack for a 1926. I need the spring with the holes for the clips and the one above that. One is missing and the other is bent in the set I have.

Steve contact me ASAP if you still need a header flange for standard, non-OHV motor. Terry Woods

Reliance brand porcelain 3 1/2 face, 5 overall mounting flange,3600 RPM markings, needle moves when spun by hand, nickel plated case that could be stripped to bare brass, marked on back 1/2 to 1 so is calibrated to be driven at camshaft speed. $185 which includes domestic 48 state shipping. Contact me thru MTFCA messaging.

My neighbor needs a used vinyl top (no bows need)
Good condition or good enough so it could be used as a pattern to remake. Pictures would be .
Thanks MTFCA
Larry LaPatka
Email: ltlapatka@gmail.com
Or call Mike Kirchoff at (954) 789-1280

Selling for a friend. Best I can say is this generator does motor...as you can see it needs the gear and cutout. If nothing else it's a good core to send in to a vendor for exchange. My gut tells me it'll work once the necessary stuff is attached. $50 plus the ride...I imagine like a starter I shipped it'd be somewhere around $20 depending on zip...

For Sale: 1923 Model TT Truck. Family owned for over 60 years. Runs and drives. Warford auxiliary transmission, distributor, electric start, Boyco cans, clear Michigan title. Located in Newaygo, Michigan. I am listing this for Dan, please PM me and I will give you his contact information. $7.500 OBO. TRUCK IS NO LONER AVAILABLE.
TT1.jpg TT2.jpg...

More photos of 1913 coilbox and parts

Rare 1913 KW coilbox. Used on Model T Ford cars in the last half of 1913 production cycle. Faithfully reproduced by a professional cabinetmaker in Cherry wood using an original 1913 KW coilbox as pattern. Excellent quality workmanship. All holes and channels for ignition switch internal wiring are included.
This complete coilbox package includes...

Should you be working on an original switch, do not assume the 6-32 screws that hold the brass plate on are the correct length. Try one gently to make sure it will work properly. I had a NOS switch that I decided to upgrade with a nicer looking plate. The screws were a tad too long, and pulled out the inserts. with messed up the whole switch....

For Sale: 1929 Ford 2-door. --- 30 years of inside dry storage. Engine free and should run. Complete with good windows. Body panels are straight and rust free. Could be original paint. Has title. Needs new top and interior. Please call 717-818-8171. $2800

For Sale: 1926 Model T Roadster. All original, runs and drives, no top irons, original Baltimore parking light. $4500. SOLD.

For Sale: 1926 Model TT Huckster Truck. Needs front sheet metal. Very good wheels (I have a set of like new wheels for additional price) Engine free. Call 717-818-8171. Price reduced to $3500.

I would like to find a set of Rootlieb's curved speedster fenders.
I have a set of Rootlieb flat speedster fenders.

Anyone want to swap?

rootlieb fender flat and curved.jpg

: ^ )

Keith

I am looking to make a spare tire mount for a 48 spoke Dayton wire wheel. I would like to use a Dayton hubcap to hold the wheel on. Does anyone have a spare hubcap they are willing to part with? It does not matter if it’s left or right hand thread.

I have a set of front Hassler shock absorbers for sale. The price is $200.00 plus $25.00 for shipping. These are the single-spring Hasslers, not the double-spring type.

Well I am going to be attempting to respoke all of my wheels here soon since the wife has been on me about getting the T running for the warm weather. I know there are blue prints available to make my own Regan press but what are the chances that there is someone on here in central Indiana that might let me rent their press that is already made?...

I've actually had this for years and nobody seemed to want it. Noticed one just sold, so here she is again. 45.00 plus shipping. ctleonard64@gmail.com IMG_20250611_101026186.jpg IMG_20250611_101014659.jpg IMG_20250611_101019956.jpg IMG_20250611_101008731.jpg

I would like to buy a complete, running late brass era engine, 1914-1916 with working transmission

Just like this

Low radiator shell. Has been welded on and has a crack. Selling as is for parts or repair. $40 plus $20 to ship

Anyone got a Kevin Prus aluminum head that they are not using? New or good used? Maybe you sold your car after buying the head, or went a different direction after buying. I could buy new direct from Kevin, but I thought I would do some fishing on the Forum, first.

Works as it should. 25.00 plus shipping. ctleonard64@gmail.com IMG_20250610_110224434.jpg IMG_20250610_110203364.jpg IMG_20250610_110211893.jpg

Doesn't appear to have ever mounted. These are 410.00 each. You can get both of these for 425.00 plus shipping. Located in mt.vernon Indiana. ctleonard64@gmail.com IMG_20250610_102008693.jpg IMG_20250610_102025445.jpg IMG_20250610_101845058.jpg IMG_20250610_101832138.jpg

Vaporizer manifolds and carb 200.00 plus shipping. Art

Excellent original narrow drum. Magna fluxed for cracks, cleaned and polished. Minimal wear on the clutch lugs. $275 plus the ride. Contact me through the forum messages .

I believe this drum was used up through 1913. It has been magna fluxed and polishhed. It does have a minor scar on the drum surface. Lugs are very useable and the shaft is tight on the drum. $250 plus large priority box charge. Contact me through the forum.

Any photos of the swap area?

Fellas, do your family & yourself a favor and fill this out.

I’m Amanda Fowler — the daughter of a classic car collector and a Classic Car Concierge.
I’ve helped families sell everything from beautifully restored classics to dusty barn finds, and let me tell you — the hardest part isn’t the sale… it’s the missing info.

That’s why I created this...

Chaffin's, Lang's & Snyder's pages don't agree with - what's correct?
If you look just at images & descriptions
First row Chaffin's, Lang's & Snyder's match. Chaffin's & Lang have part as 5679AX 'but Snyder's has part number 5680AX
Second row Chaffin's, Lang's & Snyder's descriptions match. Lang's image is different from Chaffin & Snyder. Snyder's...

IMG_0419.jpeg I have a set of these McLeran wire wheels on my 1913 roadster. I would like to work out a swap for a new set of round fellow wheels.
Ed Larson
620-845-0880

Ford Motor Co., and Henry Ford experienced many strategic events during the first years of the company’s existence. 1903 saw company formation. 1904 saw continued growth, still selling the venerable Model A. 1905, arguably saw unparalleled growth, with the advent of three models, the first four cylinder model, and two 100% dividends paid to...

I have a 1926 coupe deck lid for sale. It is not perfect but good shape for right about 100 years old. $250 plus shipping

I also have the two rear quarter panels from this coupe and the spare tire bracket. Trunk floor, and very nice subrails for sale

I have a 1926 1927?roadster deck lid. It has a couple cracks in it and some dings. It is not perfect. These are getting hard to find.
$400 plus shipping

I have a 26/27 turtle deck available also. Thanks

For sale: running board tire pump $50 plus postage
with hose and guage. hose came loose from pump. could not find a name
20250527_194356.jpg 20250527_194438.jpg 20250527_194831.jpg

Any out there?

So how is the swap meet? No one go? There are no posts about it or homecoming??

3 fun days of touring heading to the reunion tomorrow. Kudos to those who organized and layed out the tours. Great roads and destinations. Only a little bit of rain on Thursday. But was fun to be around all the different Model Ts and their owners. Looking forward to the Reunion tomorrow.

Wanted to buy a late 1925 open car dashboard in good condition. Have lots of the early style to sell or trade.

Hi.
I have been collecting T parts for about a year.
A frame, motor, axles, steering parts...other random bits.
I don't have much of a plan, but i'm very excited about this almost car.
If i can find front and rear springs and a rear wishbone, i could get this thing to roll.
If you are near Pgh, and have T parts, i would like to shop at your...

I have a '23 Runabout, see picture. I'm on the prowl for a Model T-appropriate tool box that's shorter than the one I have now, to gain more running board luggage space. The current one is 22 long, so anything shorter than that may be of interest. Tall or short, I'm flexible. Thank you.

Hello I’d like to buy a nice 1925 hood. Thanks

For sale Springfield Tire tool for Clincher Tires. Threads are in great shape. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

It is that time of year again and getting closer, You need to contact Miller Ferry and ask for Cheryll Rose to get advanced ticket sales. The tickets can be used on another date or fully refundable if a rain out that day. If you have never been there it is a great time, plenty of things to do and the preparade and after parade lunch basically pays...

Got my entry in this morning! I’m bringing two cars this year. ‘22 center door and ‘23 Touring. My son was deployed last year, he got back yesterday. He wanted to go to the festival so, he earned it! So I am bring a car for both of us. I am hoping to park them together on the ‘22/‘23 line. My promise, so I hope I get in!

I tried to upload...

I have a complete running gear for a 1925. Engine/Transmission, frame, front and rear axles, radiator, Firewall, steering column, coil box, headlights. Front and rear fenders. I have everything except I do not have a hood or the oval fuel tank. I was going to build a express pickup or depot hack but I bought a different project. I would prefer to...

Only because of Eds post below, I happen to have one of these laying around. 150.00 plus shipping. ctleonard64@gmail.com IMG_20250531_074851405.jpg IMG_20250531_074843368.jpg IMG_20250531_074902561.jpg

So this happened today :D

The weather was a little hit and miss, but the sun came out just in time to drive Brooke to her wedding; and a beautiful wedding followed. Congratulations Brooke and Steve on your Marriage!

Hi, Is anyone here bringing a T to the San Clemente Classic cars show tomorrow?

For years I’ve been curious, why did Henry Ford and his designers develop the Model K with individual jugs, when the Model N motor was cast in pairs? It seems that pairs were the natural wave of the future, leading toward the future Model T mono-block.

Then I read this May 1906 “Horseless Age” article.

IMG_7584.jpeg

The article mistakenly...

In good condition. 45.00 plus shipping. ctleonard64@gmail.com IMG_20250530_100632712.jpg IMG_20250530_100714246.jpg IMG_20250530_100655680.jpg

09-13 frame, blasted and primed $500.00. 1912 holley carb $200.00. 1913-14 DB axle $50.00. 1915 E and J model 8 and model 9 side and tail. Perfect restored $600.00/set. Much more misc mechanical and trim parts. All will be available at the Monday swap during the MTFCI tour in Owatonna, MN July 21st. Pre sales welcome.