MTFCA Forum

It's that time of year! Time to dust off the ole speedster and head for Santa Clara Valley for the Santa Clara Valley Model T Ford Club 55th Annual Endurance Run & Lowland Tour! And don't forget about our Veterans. We haven't! In addition to our annual endurance run and lowland tour, we are hosting another Veterans Appreciation Car Show at the VA...

This is the last in this series, and is perhaps the most unique in overall design having a folded center support wall, vs. the traditional vertical. The six center holes are spade-shaped vs. oval or circular. The lugs are formed from semi circular designs rather than the previous curved step outs.

T_725_B3 clutch drum preview_1.jpg...

Model T Speedster Project For Sale

-Very well built steel body with wire edge, wood firewall and floor.

-Older, new reproduction gas tank, never had a hole cut for a filler neck.

-1926-27 engine and transmission, turns with crank.

-1921-1925 frame and axles.

-Older, used high radiator and shell.

-Wheels and tires are in rough shape, just...

For Sale are a pair of Bill Bohlan’s Laurel Style Front Lowering Brackets. They are no longer being made.
$250.00 plus shipping Lang’s 1-800-872-7871

An original round gas tank. This was stored in dry storage in an attic in the 1960's Very nice no rust out or pin holes. This has the off center drain so it's not an early 12. It had a brass sediment bulb so definitely 12-15, but can be used all the way up to 1920.

$200 plus shipping.
I can ship this very reasonably. I just shipped a 1910 tank...

Pretty nice original Ford script tail gate $250 plus shipping. kdmks AT att.net.

1915/16 Model T Roadster Front Seat Cushion NEW
This is a new, never installed front seat cushion for a 1915/16 Model T Roadster. The material is vinyl. $450 plus shipping. Any questions feel free to send me a msg. Thanks!

IMG_4769.jpeg
IMG_4770.jpeg

Looking at the 26-27 roadster body that just came up in the classifieds,
but
it is in Chippewa Falls, WI and I am in Atascadero, CA (central CA coast 93422),

Any chance someone would be able to transport or know of someone making the trip out west?

This is my dream T since I was a kid hanging out in my grandpa's shop,
I have seen others over the...

Here is the 3rd major version of the Model T/TT transmission Clutch Drum. Noticeably thicker around perimeter, with only 2 holes, vs. the previous 6. While researching this drum, I have found photos showing the Ford script to be on the front side as well as the back side.

T_725_B2 clutch drum preview_1.jpg

This is first drum used in...

IMG_4808.jpeg IMG_4809.jpeg

Need a Jon Brown carbide generator. IMG_5341.jpeg

And a pair of Rands windshield hinges. IMG_5346.jpeg

For sale is a reproduction Monocle Windshield Frame with steering column mounting bracket. These castings have had minimal machining of the mounting holes, and could be polished if desired. $95.00 plus shipping. Lang’s 1-800-872-7871

Torpedo front view.png

Wanted: original 1914 Ford coil box lid

I purchased a new repro lid for my 1914 T awhile back. When I installed the coils, the lid would not close all the way. Now I have to drive with the coil box lid off. I am using original metal top coils. I set the metal top coils along side of a later ford coil and the metal top coil is much taller then the...

Set of flywheels magnets. They have some very light surface rust. Good for cores. Will need to be remagnetized. Never hurts to have a spare set on hand.

$25 plus shipping in the U.S.

IMG_9348.jpeg

IMG_9347.jpeg

Brass Ford script. Measures about 7.5”x3.5”. Could use a good polishing.

$20 plus shipping in the U.S.

IMG_9350.jpeg

Heavy Case Muncie - Gears look very, very good with exception of underdrive gear on lower shaft, which has 4-5 teeth in a row damaged. Photo of damage included. Everything spins nice. Under-Direct-Over-Reverse. Roughly 2:1 U, 1:1 D, and 0.73:1 O. Were used in Ts and TTs. I don't have the couplers. Pick up south of Kansas City or can deliver to...

To continue along with this series, here is the 2nd major series, the T-725-B.1 (first B version). This one has the 6 holes around perimeter, and the first to use the set-screw. The front thrust face is designed to be used in conjunction with T-769 (top hat) bronze bushing. The set-screw to thrust face is the noted .530 - .533 . Nothing on parts...

Hello everyone,

As some of you have already heard, I committed to obtaining several key Model T parts drawings from Benson Ford Archives. The purpose is for my ongoing 3D and schematic drawings to use a an educational tool for both here on the forum and for collectors.

A lot of the problem in rebuilding the transmission seems to be...

Thought this would be of interest. Says it can be construction from the diagram. Safe to assume assume that the 1 x 2 lumber is exactly 1 x2 back in the day

Early style front engine mount used from 1909 to about 1921. Nice condition, u bolts are in great shape with excellent threads. Can be hard to find these u bolts that have good threads.

$50 plus shipping in the U.S.

IMG_9268.jpeg

IMG_9269.jpeg

IMG_9270.jpeg

Wire wheel rear hub. Has some pitting, but the taper and keyway looks to be ok.

SOLD! $50 plus shipping in the U.S.

IMG_9264.jpeg

IMG_9265.jpeg

IMG_9266.jpeg

I am working on the chassis that I pulled out the the ground/weeds at my late friend's house have am nearly ready to finally start the engine after quite a bit of work getting it unstuck and cleaned up inside and out. It still looks pretty ugly and rusty which I kind of like and I was fixing to order plug wires and a timer wiring harness but...

Looking for a burner base/stand and gas elbow/supply like the one in the picture.
Thanks!

Screenshot 2026-03-05 at 9.43.07 PM.png
s-l1600-2.jpg

20241028_161152.jpg
For sale: Rayfield carb and intake manifold $250 plus postage
20241028_161120.jpg 20241028_161051.jpg 20241028_161120.jpg

Free: Three rusty side and tail lamp bodies. One tail lamp is pretty beat up, the other is just plain rusty. The side light body has a lot of surface rust but you might actually be able to bring it back. They're free just pay shipping. I would prefer to get rid of all of them at once.

ttlb03.jpg

ttlb02.jpg

ttlb01.jpg

Thanks for looking!

last year there were a good selection of Model T and Model T era autos and projects at the Duncan swapmeet ... will probably be a good selection of interesting cars and parts again this year ... this is the best way to see and purchase a vintage vehicle ... inperson and able to do a close ,detailed inspection and possibly drive a vehicle ... hope...

For sale: new spark plug wire brackets $12 plus postage

Nice working clean rim spreader.
$60 plus shipping

Happing Motoring.

rim spreader.jpg

WANT TO BUY

... LEFT & RIGHT REAR COMMERCIAL FENDERS TO SUIT HACK OR C-cab. ...Re-pop preferred

.....im From Australia & visiting US in May .. possible pick up ??

For Sale is an original 5Z-204 Ford Script Exhaust Pack Nut Wrench. $125.00 plus shipping. Lang’s 1-800-872-7871

For Sale is an original 1911-12 solid brass Steering Wheel Spider with reproduction wood rim. SOLD plus shipping. Lang’s 1-800-872-7871

For Sale is a used Spindle Arm for use with a speedometer setup 1912-16. In good condition with some pitting as seen in the photos. SOLD Lang’s 1-800-872-7871

For Sale is a Rear Wheel Puller in excellent condition, maybe NOS. $45.00 plus shipping Lang’s 1-800-872-7871

Want 1920s 30s pre-WW2 era camping gear or any related items. I'm in the North building. Look for the 2021 Tacoma with a rooftop tent. We camp on the spaces. We are there the whole swap meet. Anything related to Motor Camping including literature and all the little goodies ...

or send a message to the info in the photo before the swap meet. My...

For sale is three running board luggage racks. One short one and two tall ones. All three work as they should. The brackets on the two taller ones are just a little bit different. $60 for the short one, $80 each for the other two, plus shipping to the lower 48 for all three.The running board is NOT included. Best way to reach me is either a text...

Here in St. Louis, The Model T Club of Greater St. Louis, is having our annual swap meet May 3rd.
I don’t know how many years this has gone on for us, but I attended many times before joining the club, going back well over 25 years ago.
We have been at this location for a few years now.
Last year highway construction impacted our turnout, but as...

A pair of Bale handles for the center door T's
$150 plus shipping.
Thanks!

IMG_4715.jpg
IMG_4714.jpg

mikebird@lifeattheridge.net

I want to buy two pair of accessory taillight brackets that attach to the top saddle arms of any Touring car or roadster
and allows you to use the electric tail lamps. Please contact me here.
Eric Gould
Monroeville, AL

Is anyone familiar with someone who may have reproduced the strike plates for the 1910 locking door latch?
Thank you!

Anyone here know what the rings look like that hold in the glass in on the door of a Rushmore search light looks like. Also how is the mirror in the back of the light held in? Pictures would be very helpful. Thanks!

For E-Timer users...

They never worry about coil point or capacitor availability, maintenance or replacement.
They just enjoy superior engine performance, zero maintenance and excellent reliability.

Please Visit: www.modeltetimer.com for more information about the E-Timer, simple drop in installation or to place an order.

E-Timer P3 Board...

Have two sets (8) plugs fs. Made in u.s.a. 25.00 each plus shipping. ctleonard64@gmail.com IMG_20260302_090339215.jpg IMG_20260302_090348623.jpg

85.00 plus shipping. ctleonard64@gmail.com IMG_20260302_082417286.jpg kk IMG_20260302_082404342.jpg

For sale: assortment of bolts $25 plus small flat rate box

20260203_161314.jpg

I'm looking for an EZ Power Unit for my Model T Shaw Tractor conversion. Let me know if you have one for sale please. Just send me an email. Thanks!

Alex, Baltimore Maryland

For sale: 2 Stevens knock out pullers and one unknow $40 plus postage
T 153D - 1 T 153A - 5/8 no name 1

20260222_163536.jpg 20260222_163607.jpg

Zero throttle shaft wear
main jet and compensator jet access bolts have a little bit of wrench marks but are not objectionable
fuel coupling has a new retaining bolt (old one had some pliers marks - why on earth do people do that???)
no cracks in brass body
venturi is complete - I doubt it would survive removal and suggest it be left alone...

Pictured here is a Jeweled dash light that could mount to the dash of a Model T or the top of it would fit a Model A. I only have a part of the base. I don't have the lower section that mounts directly to the dash. This could mount to any 1920's vehicle as well. The top part would fit a 1928, 1929, or early 1930 (with oval speedometer dash). This...

Sold!! A really nice brass Buffalo right hand knock off cap. Missing the latch. Excellent threads, hex and Buffalo stamping. Very nice condition. It hasn't been hit multiple times with a hammer. Price is 225.00 including shipping via FedEx Ground in the USA. I do not check messages here but call me at 734-730-4274 or email directly at...

For Sale is a rebuilt Holley G Carburetor with a brass bowl. $275.00 plus shipping. Lang’s. 1-800-872-7871

I have a low head with water outlet fs. Located in mt.vernon Indiana. 150.00 plus shipping. ctleon IMG_20260227_091209925.jpg no IMG_20260227_091235337.jpg IMG_20260227_091156959.jpg ard64@gmail.com. That email is ctleonard64@gmail.com

Original, hard to find KR Wilson Steering Wheel puller. It’s a little big for a Model T wheel. Works great for Model A through 1940 Fords and other early cars that don’t have threaded holes that allow the use of a conventional style steering wheel puller.

Pretty sure the bolt has been replaced at some point, but it has the rubber cushion which...

Pat’d Dec 22, 1914 Holley, completely disassembled and cleaned, new float, float valve, venturi and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

An assortment of front radius rod parts NOS. Includes three late style tie rod yokes that accept the tapered ball (19-27). One tie rod yoke left side (13-19) and one straight shank ball (18-19). Price for all $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20260225_122302.jpg

Great hood for a survivor car. 100.00 plus shipping. ctleonard64@gmail.com IMG_20260225_114944283.jpg IMG_20260225_115018624.jpg IMG_20260225_114948433.jpg

One complete set of L style Ford shackles. Although used, they are still in pretty good condition. New nuts also included. Price is $60.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20260224_141029.jpg

One set of early figure eight rear shackles in used condition. These still appear to have some life left in them. Much cheaper that a new set. Price is $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20260224_141816.jpg

Anyone have a photo how the cables/rods are hooked up? The Lockwood's I have just have a hook at the end of the lever. Did they use a cable with a loop or longer clevis that was allowed to slide in the slot?
Go down to Dan's post on Tuesday, September 29, 2015 - 08:06 pm:

lockwood.jpeg

This is used to keep the reamer aligned when reaming the valve stems in a Model T block ( also for push rods for accessory overhead valve heads).
Asking $150 ( lots of work went into making this).
Contact me thru MTFCA message system email.

For sale Warford coupler. Coupler is used on the cast iron Warford transmissions (super six). If a standard Ford U-joint slides on the input shaft, you'll need a coupler to bolt up to the Model T transmission. Price $200 plus shipping. E-mail, call or text, (248) 894-75fiveone. Thanks, Walt

Just 14 days until the Marietta, Ohio old car swap meet. Lots of T and A parts. Nice heated building, with lunch being served. Doors open at 7:00. Just $5.00 admission. Come join the fun, see old friends and make some new ones too. Several hotels close by. Plenty of free parking. These folks do a great job of putting this event on every year on...

Just need 4 of the same manufacture. Don't care of brand. These are for a display chassis. Model t size. if someone has a set of cast unfinished hub nuts will do as well.

thnx
frontyboy contact me thru this site

Please send me an email if you have a set of Maryland 1921 plates. I can trade you these 1926 Maryland plates with original paint. They were used as shims in kitchen cabinets for Lord knows how long….

Thanks,

Alex
BaltimoreTMan

Wood hood cleats for '13-14 .prefer new or really good condition
contact me thru here.
Thnx,
frontyboy

Hi, posting for a friend. I'm missing a Right side Buffalo wheel nut. Has somebody got one that they're willing to sell. Help!

Ed aka #4

Older restoration resest motor trans rebuild new woodwheels an tires metal stem tubes new flat tube rad. Rocky MT brakes an Rocky MT 6 speed aux trans original leather upholstery good top in central CA. $18.000 Info / pix call / tex 209 769 3384 Phillip.

My Ford historian friend, Mike, suggested that the EFR folks might enjoy this letter. Most likely, some or most, of this is already known, but nonetheless, still interesting. Of course, it rotates when you click on it. Sorry.

Firsts.jpg

For Sale: One electric side light. Vintage accessary item for the T.

$75 plus shipping.

Ford Tough….

IMG_3951.jpeg

For Sale is a Model A Cylinder Head Removing Tool. SOLD plus shipping Lang’s 1-800-872-7871

For Sale are a pair of 1909-11 Touring rear door latches. They have been glass beaded and are in good condition. $250.00 plus shipping Lang’s 1-800-872-7871

1917 Model T Sold
runs & looks great, lots of new parts, no rust, located in Kingman, Az.
for details & photos email me at kingmanjeepers@gmail.com

Here one for you doers out there ruckstell housing had been made into a tractor rear end need new axle tube housing is nice 300$ plus the ride

I did not buy this originally or ever use it, so the condition is unknown. It does not appear to be abused or damaged, but even so sold as For Parts Only . $45 and that includes shipping in the CONUS.

Last Chance!
for those wanting an engine rebuilt for this years touring season. We have just enough time to do one more engine and get it back to you before we leave. I’m planning a 5,000 mile trip to AZ and back for the entire month of June. The trip will be filmed and posted to youtube, potential filmed destinations include the AACA museum in...

For sale: Bracket $25 plus postage

20220628_065848.jpg

Clutch appears to be defective. Sorry for not checking sooner

For Sale Dodge Bros. spare tire carrier with four lug nuts. 3-7/8 inches between studs. Will need re-drilling for speedster. Price $275 plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale: a 1914 original manual.

$112 a dollar per year since printed plus USPS mail.

Available again is Part # 3004B 1917-1925 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

For sale 15-1/4 inch OD steering wheel. Steering wheel is marked Dodge Bros. twice, around each keyway. Price $250. plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale brass 15-inch OD steering wheel with new brass nut. Single keyway repro. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Completely disassembled and cleaned, new float, float valve, venturi, and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

Just as stated. A single 1926 Michigan license plate that is original unrestored. $50 and $10 shipping. Email me at markpaulagember AT aol DOT com

Great condition original single brass tube Ford script tire pump. (1920-27) Rebuilt by Vern Cambell several years ago. $150 and $25 shipping. Email me at markpaulagember AT aol dot com

Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED. Dealers are asking $36.95 + the ride
ENJOY YOUR DAY!

Completely disassembled and cleaned, pressure tested float, new needle and seat, choke spring, reconditioned spray needle, test run. $195 postpaid to continental USA email: wlkma9@gmail.com

Completely disassembled and cleaned, pressure tested float, new needle and seat, choke spring, reconditioned spray needle, test run. $195 postpaid to continental USA email: wlkma9@gmail.com

I know the 2nd owner started a partial restoration on Daisy in the mid/late 60's after being stored since 1935.
Cleaning up the wood on her, while the firewall is original, the hood boards are replacements built by Syverson Cabinet, from their Des Plaines location they vacated mid 60's.
Just some continuing interesting archeology......

As subject line states...this is the last week I will take requests for brushes to be custom made for the TW timer.
See my listing in the parts section. Thank you.

For Sale rubes horn $225 plus shipping.
Has reed and honks.

4 original parts books. Some loose covers, dirty, with some writing on them. Not reprints, but priced about the same. $45 include shipping in the CONUS.
6DD1B400-B9EE-4F5F-A46B-A14AA0BF251E_1_201_a.jpeg
23702D26-680D-43DD-B3DB-44C2E695C588_1_201_a.jpeg
C5A214BC-175D-48AA-A94B-B68BFF4B80F2_1_201_a.jpeg...

Looking for a U & J manifold for my 26 T. Please let me know if you have anything.
Thanks.

I’m looking for a glass reflector for a e & j 656.
I have some things to trade, or cash.
I can switch to the metal reflectors but then I’d need two because I want them to match.

For sale a Cornwell-A wrench. It is 11/16 box on one end and a socket on the other. Like new
15.5 inches long $15 plus postage

text 314-575-7115 for picture

Found parts. thanks

Only two or three Model N were assembled by the NY auto show, with only one running for outside demonstrations. This one was hastily elevated for easy viewing. The radiator is not connected to the block. Differences from the production N included the timer located at the front of the motor (where it should be). There’s a celebrity in the crowd...

I have the back half of a ‘26-‘27 Coupe. I am looking for a trunk lid and front cowl to try and resurrect it to a complete car.

I am in Oregon so only really looking for the parts in Washington/Oregon or far northern California.

Any help is appreciated. Easiest to reach me by email at vwfool@aol.com or by cell at 602-616-3083

Thanks

For Sale is a head unit for an unknown manufacturer engine stand. It is in very good condition. $150.00 plus shipping. Lang’s 1-800-872-7871