MTFCA Forum

The roadster pickup and an A from Bardstown, Ky. are in an online auction, earlier today I thought for sure the delivery truck was on there but I don't see it now, there is a huckster on it. You'll see a Studebaker Lark on there, I was told today that's the only car left in that lot that's not sold. These were from the thread months ago listed as...

I am looking for pictures of the seat back upholstery on a 19 roadster. I am especially interested in the area of the arm rests and where the body dips down from the top bow saddle bracket to the arm rest. I want to know how close the upholstery follows the body contour. Inside and outside views with the top up would be great. If anyone has a...

Looking for 2 Brass Prop Nuts for a 1914 Touring car, would like them in good condition. Thanks Jim

FS one set of 26/27 Spindles to be restored, comes with new bushings to be installed and spindle nuts and washers. Threads are in good condition.
Asking $100 plus shipping by USPS Priority mail. Jim

August 22nd

Subject to availability

Free enclosed transport along my current route
[from Gallup, NM east along the I-40 corridor
to Corbin, Kentucky

12A1E508-5FAF-4448-8328-AC212978CAF3.jpeg

If you attended the 2023 Chickasha Swap Meet
as a private shopper - visitor - vendor
I want to personally Thank You.

Free transport does not apply...

for sale: gear with Ford script. In good condition $25 plus shipping
20221020_111549.jpg
part #T415B

for sale: spindle arm with extra hole for cable. like new condition with castle nut $50 plus shipping
20230321_125242.jpg

for sale : set of Townsend auto. cast aluminum connecting rods ... these are designed for use in fitting Model A crankshaft into Model T motor block ... the machining instructions are included ... machining will require lathe and milling machine work ... price is $150 + $17.10 flat rate postage in lower 48 states ... actual postage outside this...

This is a over hundred year old Model T accessory new in the original box. Measures 4 x2 x2 . Asking $45 plus postage.
equalizer 1.jpg equalizer 2.jpg equalizer 3.jpg equalizer 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Hi, I am trying to help a new Model t owner fix up his 1926 Model T and hes looking for a good working 6 Volt Ahooga horn, Thanks again for your help. God Bless! Tony

Very nice ready to bolt on 4 ball Kingston carb. 300$ plus shipping.

Call / Text or Message me thru the site.

248---- 495----3974.......

Thanks,
Mark

Here is an early fan hub and arm for sale. What you see is what you get. Turns but hub has some wear In belt area.
$10 + shipping. Email me at address in pictures. Thanks Dan
B2D12FBF-8704-4A37-86A9-6BCFC3D36491.jpeg
9C29663A-EB78-4ACA-B479-BEDE24EE7208.jpeg
13B0AF68-CCD8-4EE7-922B-283594E22A96.jpeg

One brass Aermore exhaust whistle $100 with free domestic shipping. Mark Chaffin (951) 805-0928

aermore 1.jpg

aermore 2.jpg

One new Bosch front plate drive shaft new (BPS-1). Retail price is $39.95. Get this one for $35.00 with free domestic shipping. Mark Chaffin (951) 805-0928

BPS-1.jpg

Hydraulic brake setup / booster. Rebuilt by a Model T enthusiast for use in his modified Model T. Price is $125 with free domestic shipping. Mark Chaffin (951) 805-0928

Brake Booster.jpg

I need to buy two original radiator springs for my 1927 coupe.

If anyone wants to trade, have 3 rears. Can deliver in Arizona or SoCal. Thanks!

Condor Brass Bulb Horn Works fine when blown into. Takes a standard horn bulb sold by Model T parts vendors. Will polish up nicely. Asking $65 plus postage. Condor horn 2 (1).jpg Condor horn 2 (2).jpg Condor horn 3.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks.
email.jpg

Sold
Cross country spark plugs
1/2 pipe plugs
Asking $40 to your door in lower 48 elsewhere be calculated beyond that
Nvbob
Jalopyt@yahoo.com

Hello guys,

I got some parts I'd like to move on. Got the usual hoarding parts, axle housings, high heads, later blocks. Also have a decent pair of 26-27 front fenders and one rear. Have a single DB front axle I'd let out of the hoard too. I prefer local pickup in Lake Stevens, WA. I can get pictures and get shipping quotes if there's something...

Sold pending payment
26/7 spindles in great shape ready for your bushings
And paint asking $135 to your door in 48 states
Nvbob
Jalopyt@yahoo.com

Whis is making the finger joint box for a repop KW Coil?
Thank you
Jon Crane
cranejon@hotmail.com

I have an old T trailer that I am trying to get on the road and am looking for some rusty ugly but usable bits to finish it. It is definitely in a heavily antiqued state that I kind of like so the anything else that I put on it needs to match. All I am needing is bolts and nuts for mounting the rims (8 total) a single hubcap and one useable but...

If you are interested in selling a Model T Ford Magneto Gap Gauge Tool - KRW Reproduction… please message me.

Looking to have a Model T transported from WV to MA. Flexible on timing, experience hauling T s required along with references. Please PM me with contact info.

for sale: upper water outlet and pulley $100 plus postage

email melbanolan@aol.com or text 314-575-7115 for pictures

for sale: engine splash pans in very good condition $100 plus postage

email melbanolan@aol.com or text 314-575-7115 for pictures

Rebuilt Kingston L4. On my shop shelves for the last four years, never installed. $115.00+$17.00 usps shipping. Check or money order. Email me through this site. KK1.jpg KK2.jpg KK3.jpg KK4.jpg

Rebuilt Kingston L4 carb. On my shop shelves for the last 4 years, never installed. $115.00+$17.00 usps shipping. Check or money order. Email me through this site. K1.jpg K2.jpg K3.jpg K4.jpg

Model T Ford 1925 right rear sedan fender original paint, this has been stored indoors for over fifty years. It doesn’t fit either of my T's, so I priced it to sell fast. $150 plus shipping or free pick up in Bay City Michigan email wschubert@sbcglobal.net or text / call 989 671 7594

Just what title says. I can't find my original copy. Smudges O.K. as long as book is readable. Reply by message on forum or email. Terry Woods

Here is a nice, small, early brass horn. This horn measures 5 long and the bell is 4 in diameter. A neat small horn and looks to be in good condition.

The price is 75.00 including FedEx shipping and insurance in the USA.

Call directly at: 734-730-4274 or email: motoringicons@hotmail.com

Thanks.

Here are two, kerosine lamps marked Dietz Eureka and probably date from 1915 or earlier. These are in great and original condition. The glass is good on both lamps.These are both 7 1/2 tall and have 4 in diameter for the doors. They are complete with the burners, etc.

The price is 125.00 for BOTH including FedEx Ground shipping with insurance in...

for sale: vaporizer intake manifold 1926/27 $15 plus postage

20230316_144115.jpg 20230316_144106.jpg

20230316_125051.jpg
for sale: fan, pulley and bracket $40 plus postage
20230316_125044.jpg 20230316_125051.jpg

Hello all!
While I am not a model train member, i just want to pass along that on Saturday 18 and Sunday 19, there will be a Train Show at the Lena Winslow School.

Lena-Winslow Elementary, Junior & Senior High Schools, 401 Freemont
St; 10am - 4pm; Lunch available 10-3pm; Admission Free, parking
free, donations appreciated; Roger Schamberger...

For Sale: Complete set of 1926-27 Model T Fenders for touring and sedan. Right front fender is New Old Stock other fenders are used but in good condition. The fendors will be at the Chickasha swap meet in Oklahoma. Will be there till Saturday. They can be picked up there.
$1150.00 for complete set. Can't place but 5 photos here. Call for more...

F-S Original Carburetor heat pipe, pre. 1926-7,nice condition, some very light surface rust 15.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

One more $30.00 plus shipping
Tom Butterworth
772-475-9142

Looking for a door striker and a rear spring clamp

Does anyone have a nice clear pic of the window channels in a TT steel cab? I assume there is one since the glass is 1/4” and the opening in the door pillars 5/8” or so. I can make a felt lined wooden or aluminum channel easy enough, but would like to see what was original. Thanx.

FS KW Master Vibrator In Good Original As Found Condition With Original Finish $75.00 plus shipping Greg 612 940-5972 gregps@msn.com

FS 1911-1914 Right Side (passenger) Headlight Fork Good Used Original Ford $50.00 plus shipping Greg 612 940-5972 gregps@msn.com

Over a hundred years old new in the original box. Measures 4 x2 x2 . Asking $55 plus postage.
equalizer 1.jpg equalizer 2.jpg equalizer 3.jpg equalizer 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!

email.jpg

I'm looking for the battery horn switch 'guts' for my '26, the Bakelite cylinder with the horn wire connections on one end and the brass switch contacts on the other. I have a NOS horn button and mount. I know the complete assembly repro horn switches are available and I can go that route, but all I really need is the electrical part. Thanks,...

Set of bodies for accessory spring loaded wishbone and tie rod ends,

Pair of original era accessory outside oiler fittings. $35 pair, domestic postage $10.

There is an Allen Rotating Spark HCCT on eBay.
I have no connection to it.
It neeeds restoration.
It looks like the parts for the rotating spark indicator are missing.
The meter shown is incorrect for a HCCT (as stated by the seller).
It is a DC ammeter - the HCCT uses an AC Ammeter.

Thst being said, it looks like a nice project albeit a bit...

In some stuff I got is a reground cam with Jim Wade regrind 255 lift written on box. Anyone know who Jim was? Did he regrind cams or did this come out of his engine? Stuff came out of middle Tennessee.
Any info will be appreciated. Thanks Dan.

1909-1910 5 Ball Kingston Carburetor, $1250 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

20230313_133031.jpg
20230313_133015.jpg
20230313_132956.jpg
20230313_132943.jpg

THIS ONE SHOWS NO WEAR, HAS CAST BRASS LEVERS. CLEAN BOWL WITH CORK FLOAT THAT LOOKS GOOD. $289. SHIPPED IN USA.

Allen HCCT meter mount plates are now available.
I had some cast recently (raw castings shown).
These are cast from aluminum.
Original ones were cast iron (or steele).
Drilled, taped and ready for meters.
This part is commonly missing or broken.

$55.00

Bob Cascisa
RMC Engineering Services LLC
360-620-3226
bcascisa@comcast.net
 
IMG_0454(1).JPG...

Pretty nice Model T frame, front end and rear end. Surface rusty but not terrible. $300 OBO

Enjoy !

@

FJ

Empty f250 and 16’ car trailer going from West Winfield to Lancaster Ohio the week of March18. Will haul anything out or back or to points nearby or in between.

Is there anyone fairly close to Detroit going down to Chickasha who can pick up a set of Demountable wheels for me? I’ll gladly pay you for your help! Bill 586-651-5760

I’ll be going from West Winfield NY to Lancaster Ohio sometime between March 18 and 25. I’ll have an empty F250 and 16’ car trailer. Returning with a small car on trailer. Will transport out and have some room in truck on return trip. Contact me if you need something moved to Ohio or to central NY or points in between. Reasonable rate. Thanks.

This group of parts

Set of 5 covers and nuts $45, domestic postage $10.

Here is a brand-new decal never been mounted for an early prestolite tank. This comes with two decals. 1 is the the main decal that has all the information and the second is the long prestolite logo.
$25 plus shipping

mikebird@lifeattheridge.net or five (7) four 5 (8) four 6 seven (44)

IMG_2185.JPG

Here is an early very nice prestolite regulator FS. The threads are great, the valve turns very nice and presto lite wording is crisp. Just a little grungy but should clean up very nice.
$125 plus shipping

mikebird@lifeattheridge.net or five (7) four 5 (8) four 6 seven (44)

IMG_2181.JPG

IMG_2181.JPG

IMG_2181.JPG

Fir sale is an original commercial Rajo head. The head has been baked, blasted and magna fluxed. It looks to have been decked as well. There are two small cracks on the deck surface that should not hurt anything. The original intake/exhaust manifold is included. Someone changed the flange to suit their needs. I have no other parts for this head. I...

This is a complete set if linings for a 26-27 transmission. You will receive one wide brake band and two narrow bands plus the brass rivets. Thus set looks to be in good shape and is 20+ years old. The set is $110 plus shipping. Delivery to Chickasha is possible. Please email through the forum as I did not check pm's often.

One set of Scandinavia band linings, look to be in good condition. Will include brass rivets for mounting. These bands are likely 20+years old. $110 plus shipping. Delivery to Chickasha is possible. Please email through the forum. I do not check pm's.

This is an assortment of tools I’m taking to Chickasha. I would like to trade for transmission tools and other model T special tools. Would also consider selling. Not wanting to ship them at this point. Thanks

Looking for a usable late 26-27 brake drum and also a transmission shaft. Thanks

Pair of original bud vase holders. Asking $60 plus postage.
Bud vase holders 2.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Early Model T Body parts with frame. The frame is in very good condition. Will sell separately.

Price - $150.00 for body parts
Price - $400.00 for Frame

Will deliver to Chickasha, OK

IMG_7398.jpg
IMG_7399.jpg
IMG_7400.jpg
IMG_7401.jpg

I have a set of NOS - Rear Fenders with Brackets for 1924-25 Coupe.

Price - $785.00

Will Deliver to Chickasha, OK swap meet.

IMG_7392 (1).jpg
IMG_7393 (1).jpg
IMG_7394 (1).jpg
IMG_7395 (1).jpg
IMG_7396 (1).jpg

I have a 1926-27 unrestored car that needs a top boot, any condition works.Please let e know if anyone has one.

Thanks,
James 630-608-3978

This is a nice period case to safely carry your spare headlight and tail light bulbs in your car. Made by the Dover Stamping And Manufacturing Co. Patented Nov 23 1915. The Bulb's securely spring load into the case sockets. Comes with the bulb's you see. Asking $65 plus postage.

Spare Light Metal Box 1.jpg Spare Light Metal Box 2.jpg Spare Light...

For Sale: kerosene taillight and license plate bracket, both marked Ford-O . Correct for 1923-1926 Model T''s without starters. Large clear glass faces license plate. Bead blasted and primed. No chips or cracks on glass. Some light pitting. Price $150. plus shipping. Call or text (248) 894 75fiveone. Thanks, Walt

24-5 stanchions. Originals, epoxy primed. $50.00+$25.00 ups shipping. Check or money order. Email me through this site. S1.jpg S2.jpg S3.jpg

26-7 stanchions. Quality reproduction. $120.00+$25.00 ups shipping. Check or money order. Email me through this site. S1.jpg S2.jpg S3.jpg

Nice brass aermore pedal. This can be used with a toe instead of a heel, and can mount in the floorboard near the clutch pedal. $35 plus shipping.

Dirty and surface rust, with foot for long nose pan. $40 plus shipping

Nice aftermarket swivel, turns freely. $175 plus shipping.

SOLD: One Pair of 1926-7 Windshield Stanchions only. $185.00 PLUS shipping. Can deliver to Chickasha, OK Swap Meet.

Still having trouble adding photos!

SOLD the Windshield Stanchions and Windshield Frames with new glass. Thank you all for your interest.

Thank you.

Complete new starter bendix. $65 plus shipping.

IMG_4532.jpg

I’m looking for a set of 4 or 5 23”, 30x3.5 Demountable wheels with rims. 586-651-5760

For Sale: 1925 Model T Pickup Bed. $850.00 Can deliver to Chickasha, OK Swap Meet.

Meter is in good condition and the wood case is missing it's back cover. The meter can be removed and used on your dash along with a momentary switch to test your magneto on the road or use as is with new wire leads as a hand tester. Asking $135 plus postage.
Magneto-meter 1.jpg Magneto-meter 2.jpg Magneto-meter 3.jpg Magneto-meter 4.jpg

Please...

You need to be a member to post in cars for sale. For the administrator - I'm only the poster, the boss man's member no. is #50232. If you don't approve of this that's fine. 25 touring that is a rather complete car. Has all top irons, missing the front piece wood.seat springs ,even little end caps on wood. Has wire wheels on now. Started it...

Nice early box with the quadrant tight rivets.
Nice knurled top not messed up .
$150.00 plus shipping.
Tom Butterworth
772-475_9142

1914 Jno Brown Model 115 steel top taillight and Nonpareil horn for sale. Horn is missing the front frame and screen, couple of dings in the horn. The taillight is in good shape, glass is good with decent burner. $120.00+$22.00 usps flate rate shipping for both. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg B4.jpg

Folks contact me about shipping parts
and other items but I am not always
available to transport
what they need moved …

I have heard good things about YRC Freight:

@

FJ

Brass top coil new condenser and points
Adjusted on ecct
$90 to your door in lower 48 states

Rebiult and tested on ecct
$100 shipped in l I were 48 states

Checking my youtube stats, I'm shocked. Why did this video take off like it did?!? 289,449 views. I wish I could get that many views on all my Model T videos - I'd be back on the speedster project if I did!

I’m still looking for a reliable 1917-21 T touring car with original engine and running condition. I’m not as concerned about how pretty the body is as much as I am mechanicals. I also want a car with starter, Demountable wheels and side lamps. And yes, I know early cars didn’t have starters and I know later ones without demountables didn’t have...

for sale: dash panel and steering column mounting bracket top and bottom 1923/25 $45 plus postage
20220528_121237.jpg

Chrome horn with some rust on her. Believe it will shine back out. Works well. 80.00 plus shipping. ctleonard64@gmail.com IMG_20230303_121036294.jpg IMG_20230303_121010102.jpg IMG_20230303_121000578.jpg

1909-1911 Front timing cover with brass 2-piece timer, reproduction. $1200 not including shipping, but can be delivered to Chickasha show for pick up March 16th or 17th. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum.

Sold, thank you

20230302_121933.jpg
20230302_121955.jpg
20230302_121940.jpg

1909-1911 6-rivet rear end housing. Used $2500 - Pick up only, or free delivery to Chickasha show for pick up on March 16th or 17th. Contact Lang's Old Car Parts 1-800-872-7871 and mention MTFCA forum.

Sold - pending pick up

20230302_102222.jpg
20230302_102214.jpg
20230302_102207.jpg
20230302_102200.jpg
20230302_102155.jpg

I have a Senior and Midget Glo-Lite but my Midget is just the bezel. It would be lovely to find an old glass lens for it, measuring anywhere between 1.25” and 1.5”. It would be especially lovely to find one in red or green.

Rummage through that big box of lenses you have been amassing!
Thanks!

for sale: rear fender bracket to frame bolt set. $15 plus postage
Lang's #T4804 MB

email melbanolan@aol.com or text 314-575-7115

SOLD to John
Here is a new set I got with a load of parts the replacement wood for 1926-7 Roadster dealers get about 80.00 a set
these are 65.00 plus postage, Bob
modelt2001@comcast.net
best to call 815-633-7244
thank you forum

Canadian Ford dealer handout for 1922 in excellent condition. Asking $25 plus letter rate postage.
Ford Diary, Brampton Garage Ford Dealers, Brampton Ontario3.jpg Ford Diary, Brampton Garage Ford Dealers, Brampton Ontario.jpg Ford Diary, Brampton Garage Ford Dealers, Brampton Ontario 2.jpg
Please use this email address below and NOT the personal...

Have 3 in good condition with lug nuts, buy 1, 2 or all three. $150 each plus shipping.