MTFCA Forum

Makes it easy to get to the bolts when installing/removing carb. Suppliers want $16+ for a set.

here are two brand new sets sold together (packages have shelf-wear) for $10+ postage

IMG_20220116_143704_1CS.jpg

For sale is a frame and body for a Ford Model T Speedster, along with many many parts, including torpedo fenders, lots of brass, running boards, torpedo hood, etc etc. This is a project I started years ago. My family has grown and I have no time to finish. A lot of work is done, however the car needs to be completed. Contact me for more...

Tester used once, $225.00 with shipping. Email or Text if interested only.

IMG_6677.jpeg

IMG_5672.jpeg

All the Best,

Hank

$27.00 with shipping. Email or Text if interested only!

IMG_6675.jpeg

IMG_5672.jpeg

All the Best,

Hank

$70.00 plus shipping. Email or Text if interested only.

IMG_6674.jpeg

IMG_5672.jpeg

All the Best,

Hank

Price per picture with shipping! Email or Text if interested only!

1/4 -from 1 1/4 to 4 1/2 . A lot is here.., $60.00.
IMG_6671.jpeg

5/16 - 1 1/2 & 2 1/2 ? $25.00.
IMG_6672.jpeg

3/8 - 1 1/2 to 6 . A lot here too...., $65.00.
IMG_6673.jpeg

IMG_5672.jpeg

All the Best,

Hank

None of these parts are gorgeous, though they will clean up and function fine. Bowl exterior is pitted, but these bowls are made like bomb-shelters and is just fine from a functional standpoint. Flapper, flapper hinge, and flapper bumper are not pretty either, but will clean up. If you love L-4's, here are your parts. Not pictured, but included,...

New heating plate and like-new intake manifold (painted Model A green)

$15 plus postage

IMG_20220116_120242_2.jpg

Has anyone fitted this kit for holding in place a spare rim and tyre on running board. I am unsure of position of the top bracket. Any one there who could take a photo please

for sale an assortment of misc parts 26-27 pan supports and two horn buttons and anti shimmy accessory set asking $50.00 for all with shipping inc.call Matt 503-824-2681

for sale a single and a double twist horns asking $400.00 for the pair includes shipping call Matt 503-824-2681

Barn fresh set of 5 wires with hubs asking $1100.00 for all must be picked up call Matt 503-824-2681

With apologies to our Dutch-American members!
T Card 25.jpg T Card 26D.jpg T Card 27D.jpg T Card 28D.jpg

Just has light surface rust here and there from storage, $300.00 plus shipping. Email or Text if interested only.

IMG_5672.jpeg

All the Best,

Hank

Just has very light surface rust from storage, $150.00 plus shipping. Email or Text if interested only.

IMG_3926.jpeg

IMG_5672.jpeg

All the Best,

Hank

This is a head that J & M Machine has internally cleaned , checked pressure tested to 40#. It was resurfaced. I will include all the invoice paper work from J & M. No Made In USA ,I think it is 1911 would work on a early 1912 to. I can text photos email photos. I have about $975.00 in it with the minor repairs and work done. Will ship in a wooden...

$100 FLATE US SHIPPING INCLUDED robertaweitzel@gmail.com 20220112_181147.jpg

I have 2 left hand housings, nice, $20 each. I can deliver to Tulare in April.

Very nice and solid set of 1911 Fore Doors, also for early 1912 before the slab side. No rust, no dents, solid wood, latches and brackets. Asking $750. I can deliver them to the Tulare swap meet in April.

I have a pair of Rootlieb Speedster seats that have never been used. They have a wood base and a steel outer skin that has been yellow oxide primed. Rootlieb does not have any of these seats in stock currently.

$275 plus shipping.

Please message or Email me for photos and additional information.

Stephen 314-287-1901

stephensmail2001@gmail.com

Pair of windshield adjusters for 13-14. 35.00 each from vendors, 25.00 each here plus shipping IMG_20220114_093111695.jpg IMG_20220114_093125192.jpg IMG_20220114_093118051.jpg

Here is a pair of rear fender irons. Someone has taken the dog leg out of them, probably to use for a depot hack or speedster.

$25 plus shipping

mikebird@lifeattheirdge.net or 574-584-6744

IMG_0031.jpg

IMG_0032.jpg

Made these up years back, these are the only ones left. Will supply extra eyes for attachment, made from 4430 series steel. The catch mount is heavy in design, but we made these that way to be shaved down to fit the style of the car. Extra length can be cut to fit your needs. $350.00 per set plus actual shipping cost. Email or Text if interested...

This is a new reproduction brass horn screen for Rubes or Nonpareil horns. Replace your dented or broken horn screen.

$150 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_0037.jpg

IMG_0038.jpg

I have here a set of 11-12 door handle reproduction castings that need to be finished. Included is the escutcheon plates.
$100 plus shipping

mikebird@lifeattheridge.net or 574-54-6744

IMG_9707 4.JPG

IMG_9708 4.JPG

I have 56 total of these vintage carriage bolts and square nuts. They are cut threads so if you need to, you can cut to size and rethread to what you need. These are great for wooden bodies.

$30 for the whole lot plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_0049.jpg

IMG_0050.jpg

I have 14 of these carriage bolts. Great to use for authentic hardware on wood bodies.
$10 for the lot plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_0047.jpg

IMG_0048.jpg

I have two boxes of NOS red rubber tubing. The size is 11/32 OD x 1/4 ID. Each box has 35 feet. Both boxes were sealed but I opened 1 of them to take pictures and get the sizes. This tubing is not stiff but very rubbery. The tubing is in great shape.

$10 a box plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_0045.jpg...

I have a little over 40 of red rubber tubing 1/2 OD x 1/4 ID
$15 Plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_0033.jpg

Here is two metal oval frames with beveled glass. The glass is in very nice shape no chips. The metal frames are in nice shape as well. I think these were sold as an accessory, not sure. Frames measure 7 x 11 3/4
$30 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_0035.jpg

IMG_0036.jpg

Hi, For the pictured ornament, can someone tell me how the ornament ITSELF is assembled, particularly the propeller. I already know how it attaches to the radiator cap. I am not interested in the wiring. If someone has a picture of how the shaft is attached that supports the propeller, I would like to look at that. Also, if someone has the...

T Card 21.jpg T Card 22.jpg T Card 23.jpg T Card 24.jpg

SOLD - 1925 Model T Dr.'s Coupe

I was totally shocked to hear of RV Passing! He was a Great Friend for many years & helped me out many times! What A Talented T Guy! He Will Be Missed In Our Great Hobby! RIP - John

Needing a tapered front leaf spring for my ‘15/‘16 (it was made in Nov…so it’s a ‘16 model built in ‘15 although when the title law came in to effect it was titled a ‘15 since that’s when it was made). I looked in the barn and I have 2 tapered rear springs so if someone needs a tapered rear and they have a spare tapered front, we’ll swap!

This set of 5 steel parts for the accessory Stromberg carb are $155 ppd. I had hoped they would be a continuing job, but like so much of these parts , I know they be a one shot deal. We’ve sent them out to everyone that has paid, and if you haven’t gotten yours, we may have missed, so drop me a line. Never a hurry for payment, so if you think you...

1913-1914 Aluminum transmission cover with lettered pedals as shown in photos. Cover has no cracks, wear from the exhaust pipe or repair s. The clutch pedal needs to be rivited in place. $300.00 plus shipping. Please respond by email only.

This front end is pitted from rust as shown. The logo on the front of the axle can no longer be seen. The logo on the opposite side and the T 202 is shown in the photos. By reversing the spring perches you can reverse the axle so the good DB logo is in front. The drag link is the 1913 and later style. The left spindle is DB the right is not....

T Card 17.jpg T Card 18.jpg T Card 19.jpg T Card 20.jpg

I have a spot light that is shown in the pictures below and am trying to find period ads or patent information on the spotlight. It may be NOS and the only markings shown is Pathfinder . Because of the way you can rotate the arm and move the light by pulling the handle in and out, it can be moved 360 degrees.
I searched the Forum for information...

t OHC b.jpg t OHC b.jpg

I'm trying to find a 13 tooth pinion gear for a Ruckstell rebuild. All the vendors seem to be running out of pinion gears. Does anybody know the story about what's going on with this? I was ok when the shortages were just about TP, but not this!

Just what you see. I have a extra set I can measure the springs. $40.00 ea. plus shipping.

These header plates are 3/8 thick, cut for 1 5/8 and 1 3/4 pipe. $125.00 each plus shipping.

I need a rear light for 1914 Touring. I need the lenses to be intact. It does not need to be in show condition. If you have the mount that would be a plus but not necessary.

Don's family has consigned his cars to Sullivan Auctioneers in Carthage, Illinois for dispersal. The auction is online only and will be happening in early February with inspection starting in late January.

This is a general auction announcement. Scroll down the page to see Don's cars.

Real nice for display or use on you car . Box is very nice original paint $50.00 plus shipping

Just about at the end of there life. . There's a little left though. Rather than throw them away, would you pay 1.00 plus the envelope to mail them in? IMG_20220107_141143531.jpg IMG_20220107_141200330.jpg

need 2 windshield cones for a 26-7 open car, bought some reproductions that do not fit well. I am piecing together a roadster we found in parts, Thanks for looking , any questions please ask Dave

Don't seem to find this model any earlier than 1913 and no later than 1914, that said I suppose that it could extend beyond 1914 if the purchaser didn't want electric lights (magneto or otherwise). Anyhoo, this lamp is characterized by the Hood , the Bezel , the Closure Thumb Screw and the Gas Inlet all being made of brass, the body of the lamp is...

Driver's side is a mint fender. Pass. Side needs a little love. Nothing terrible though. Feel free to ask for more pictures. I'm going to put them out there to go for 200.00 for the pair plus shipping they are only 375.00 each new. IMG_20220106_151522321.jpg IMG_20220106_151428052.jpg IMG_20220106_151413493.jpg IMG_20220106_151557057.jpg...

SOLD
1 Pair of new 15-18 engine pans one has rust color from sitting, but will clean up fine
dealers get 180.00 a pair
'how about 140.00 plus postage, never been mounted
Bob
815-633-7244
modelt2001@comcast.net

One of my friends picked this up at a storage unit. Looks really old. The brackets are riveted on. I was thinking it had something to do with railroading? Can anyone identify what this may be?
Thanks
Mike

445526F9-E9D9-4BE7-A522-D8E20E36E026.jpeg

Very nice straight with no dinks.hood rod hole may have been repaired, but appears to be a nice job. a very nice piece. 130.00 plus shipping IMG_20220106_100728206.jpg IMG_20220106_100803878.jpg IMG_20220106_100756212.jpg IMG_20220106_100743837.jpg

Does anyone have 2 perfect original hubcaps for sale.
Thanks
Eric Smith
815 535 1367

strcolumn.jpg
I'm restoring a 25 Touring steering column and found the initials CW stamped in the base of the column. Wondering what these might be and if anyone seen these before. Its a late July 25 Touring,

W T B
Looking to buy K W coils that have been re configured to fit in a
1913 wood heinze box.
I've heard of guys cutting them down to fit the 1/4 inch narrower box.
Rich 561 262 o393

Ford script release ring. 10.00 each plus shipping IMG_20220105_140209638.jpg IMG_20220105_140156080.jpg

Two delco distributors for parts or restore. $40.00 plus $15.50 shipping. Ted 503-728-3476

New day, tiger anco mag post.2 with oilers. 28.00 plus shipping for all IMG_20220105_101320664.jpg

24Z6576 alignment tool fs. Works on 12-27. 35.00 plus shipping IMG_20220105_095206972.jpg IMG_20220105_095200442.jpg IMG_20220105_095147423.jpg

Does anyone have the correct measurements for the side board width on a model TT stakebed?

I’m currently in the market for 1, maybe 2 good used non demountable 30 by 3.5 rims. Looking for nice rims, with clean edges/ lips where the tire clinches on. Please no junk or heavy rusted parts, I want to get these wheels rebuilt.

Feel free to contact me:

Jerontakacs@gmail.com
734-895-5363

I just put a thread about def on off topic. If you use def you may want to read it. Dan

Looking for a set of Irons/hardware/Brackets to build a Wooden Bed for my ‘26 Runabout.

Thank you in advance.

for sale ... rim compressor / spreader tool ... unit is in good condition ... price of $50 includes postage in lower 48 states ... prefer paypalfriends and family payment ...Gene French gfrench1953@hotmail.com rim tool.jpg

Oops. Messed up the subject line.

Pat. 1916. Been trying to sell this awhile, somewhat of a rare carb, 70.00 plus shipping IMG_20220103_114852842.jpg IMG_20220103_114828318.jpg IMG_20220103_114813620.jpg

IMG_20220103_093106838.jpg As far from t as you can get! An odd ball on my shelf.part no. D206549 for Crosley 4 cyl. Guess if you had one you'd IMG_20220103_093106838.jpg IMG_20220103_093118304.jpg need it. 85.00 plus shipping.

I have several of these cast cap castings available, if’n yours is missing. These fit the gas gauge advertised below. They must have been popular and are a really well made item. Ive seen them with several different names of the manufacturer , and also plain. I’ve added “GAS” to the cap, but easily removed if desired. $35 ppd tmorsher@icloud.com...

I’m looking to $ buy $ a single inside door handle similar to this. Doesn’t have to be identical. Any condition, let me know if you can help. Thanks for LQQKing Tmorsher@icloud.com 26F35C81-A27F-4935-99A0-03DB263F8092.jpeg

Howdy folks and happy new year!! Here is a really neat show that I am organizing along with my good friends at the Barnyard Art Studio & Gallery in Lititz, PA! It is a one-day event, on Saturday, June 18th, 2022 with free tractor and car registration! We are also accepting vendors for a flea market and will have live music and food! One of the...

It is officially 2022. With this year a group of model Ford Coupes will be 100 years old. I am limiting this to just coupes (see below).

I started a project to establish a data base of Coupe motor number from 1922 and their body number. A few have helped. Today 1 January 2022, I am going to list (for privacy no names will be given), of those...

We made a run of these before my machinist passed away and are having a sale on the end of them
made here in the USA and shop Vaporizer spray needle
Dealers are getting 28.- 31.00 each
limited qty. 20.00 each. plus, postage
modelt2001@comcast
815-6337244

Super cool Lunkenheimer flow sight glass. 1/4 ID inlet/outlet lines, 3-1/2 tall x 1-3/4 wide x 2 deep (not including feed lines). $150 including US shipping - paypal F/F

Bosch S12 magneto switch. Nickel plated face with some brass showing through, long key for short armed drivers. $180 includes US shipping, paypal F/F

For my 1912, I need a DB spindle, drivers side. This will complete my front end. Thank you.

I'd like to buy two pairs of front fender irons like the ones in number 4 in the attached picture.

If you have a set without the hole already drilled, please send a picture or two to me at bill.everett@epickett.com, or text to me at 901-496-8795.

Thank you.

Model T Front Fender Irons Top Strap Connection-1.jpg.png

Set of 4 coils ready for shipment right after Newyear.
Sitetop.jpg

Price are depending on exchange basis so that old coils must be send in advance. Below is prices exclusive VAT, which varies depending on your country.

4 coils 215,00 EUR + shipment and VAT

In case you do not have core coils to send in advance OR the ones you send do not pass...

Just bought my first Model T! Looking for a tag to hang on it. Thanks.

Looking for firewall steering column lowering bracket and lower wedge, used to be sold by Lang's

I have a handfull of extra parts laying around that I am looking to sale.

ALL ARE USED AND WILL NEED CLEANING

Model T head - 100$
Model T Rear axel - 150$
2 speedster square gas tanks - 75$ each
A model A crank - 100$
Model T pistons - I have two buckets of pistons and a couple of rods. I can sell them singally or as byh the bucket
Model T...

Looking for a pair of 26-27 hood shelves in good condition. Please PM me.

Happy Birthday KD

If you are logged into Facebook - check out this video:

@

FJ

Just bought another car and need to make space. 1929 Model A Sedan for sale. Good older resto in great running and driving shape. Everything works except wiper and gas gauge (bad float) Good tires & tubes. Clear open title. Located in Oswego, IL. $10,500 or best offer. Text/call Jim 630-608-3978

I have a nice Ford script screw jack for sale. It's not beat up like a lot of them are. The threads are still good with very little wear. Needs cleaned up, but overall, it's in very good shape.

Ill take 40.00 for it plus 16.25 shipping.

I accept pay pal friends and family , check, or money order.

Please contact me at the info in the last...

Five Rebuilt Ford Script Coils.JPG

Have your ignition coils rebuilt by someone with over thirty years’ experience.
I have expanded the window to accommodate rebuilt coils as a Christmas gift.
Coils received in my shop between December 15, 2021 and January 31, 2022 will enjoy the benefit of free Priority Mail return shipping to USA addresses.
If...

Again, old pics. Some neat Indiana history here. This is a Lamco bodied speedster , made in Cannelton, Indiana by the Lehman Mfg co. This is one that sold and went to Belgium. Had a ROOF OHV engine rebuilt by Engine Joe Bell, a ruckstell built and installed by him,custom radiator repair by Bill Lucius( he never wants to see another of those) all...

WTB Everything needed to convert one of T’s to tracks (snow machine). Does anyone have a complete kit or most of the parts needed? Also will buy a complete car or truck already converted to tracks.
Please call / text 920-808-3381. Email r.myers@maxaircharter.com.

I'm looking for a pair of the early front fender irons, with the eye for the top strap. I'll accept the style where the eye is not drilled open, I can drill it myself. PM or call/text me 419-271-5405. Thanks.

This was posted on FB but I haven't seen it here. If I missed it, here it is again. :)

Winter Clinic 2022.jpg
Less than a month away. I always enjoy this.

Looking for needle assembly for a Toquet carburetor. This includes the needle and the threaded collar that the needle goes into … which is screwed into the top of the carburetor.

Puritan brand switch for coil box or other ignition, marked BATT OFF MAG, $65 domestic postage $9.

My Runabout came sans the spare tire and carrier. I found the Carrier thanks to Mike, now I am looking for a Split Rim to put on it, one with a serviceable tire (21 in × 4.5 in (440/450-21)) would be a plus. Photo attached to show current rims.

1D06F364-BBB1-4C35-81D3-CEB5E932A0B0.jpeg
CB6B8103-AFA5-4181-8FD8-F79DCD54A729.jpeg

Thank you in...

We lost another great friend and Model T good guy Walt Groskurth from Mankato Mn. He drove his Model T many miles and attended many Model T and Model A functions. We will miss you good Buddy, it will not be the same without you. Goodbye good friend. Bob.

This was NOS, I beadblasted and powder coated it. All I have, can send pics of the other part, if that helps. $40 ppd to your door tmorsher@icloud.com to reach me 78CDBE4B-3166-4C44-85B2-FA04125E9DF3.jpeg 69B7A57A-6AEE-430B-8409-A3B719597C0F.jpeg

Have a nice 4-ball for sale. throttle and choke plates move freely and the float looks good. All ball are in place. $350 plus shipping. 518-755-0986.

This is probably the best WR head you'll ever come across. It's been magna fluxed and surfaced plus the outside has been painted. Will get pics up later today or tomorrow. Very difficult for me to part with but am changing direction with my build now.

As you know, these are very heavy and I have shipped one previously to California from Toronto....

Mostly there, missing but for bowl, float and needle. Also missing choke spring. Good start to a rebuild or parts? Bowl has no visible cracks! $50 ps

My dad has these for years, they were freshly rebabbitted until we installed to cure a knock. Come to find out it was a bent crank. One has a broken babbitt on the cap. Make an offer.