MTFCA Forum

Kingston L for sale. I used it while my Holly G was getting rebuilt. T started and ran good with it. Just been sitting unused and unneeded for a while.
$200.00 TYD.

Decided to go a different route. $80 plus shipping. Prefer PayPal family/friends but will accept checks
Lens cup is clear with red celluloid disk. Its likely to ship cheaper with the tail light bracket detached

This has the perfect patina! All original Stewart #26 speedometer with bracket. Seems to work but I have not had it on a car. The pictures speak for themselves!!
Asking $300.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593 1D94FD61-579A-4E34-B19C-FA267B3438FB.jpeg

D99E8CE8-1651-4289-89E7-DE810C5CE050.jpeg...

Here is a pair of ‘26-‘27 rear brake drums. They are in decent shape. They have some pitting but no heavy scoring.

$50 plus shipping in the U.S.

078AD61E-3E7B-4F22-8288-80751850727C.jpeg

233BD5CD-A518-4C0A-B6A6-9E48D55083A4.jpeg

I got my switch back today for my 1927 coupe. It is a beautiful restoration. Attached are before and after photos.

4214EA31-F137-4393-9DAE-2577BA40C421.jpeg
A few years ago I did a run of these. I see that there are 10 left. If you are interested, they are $25.00 each with 2 rivets and including postage.

Nice hydraulic booster setup for juice brakes $100.00 plus domestic shipping. Mark Chaffin (951) 805-0928

Brake Booster.jpg

for sale: running board tire pump $50 plus postage

20220611_134431.jpg

for sale: clutch spring $10 plus shipping

email melbanolan@aol.com or text 314-575-7115 for picture

for sale: 2 haynes rims 30 x 3 good condition with surface rust. $300 plus shipping

email melbanolan@aol.com or text 314-575-7115 for pictures

Nice Kingston coil box. Missing the lid $400 plus shipping I also have a few other Kingston boxes in various conditions email is the best way to reach me bjerm10@gmail.com

The Portland Swap Meet begins tomorrow, March 31. The Always in April swap meet continues through Sunday April 2. Rain (most likely) or shine, come on out and see me at the HCCA booth in the northeast corner of the D building. Look for the big yellow banner!

PSM 2017-1.jpg

: ^ )

Keith

Nice original 4-Ball. Looks complete. Nothing is frozen-ready for rebuild. I have not had the bowl off. $150 including shipping to the lower 48.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

C6D644F0-BF77-4E65-86C3-A13C004B4DA0.jpeg

E1B686F2-A66B-4CDB-BF67-40173E70EB55.jpeg

9DF646EB-E6CB-4AC3-BCBC-2352BB5180AA.jpeg...

Selling a complete Ruckstell differential, with the shifter assembly. I also have an assortment of parts that can be used to build up a second Ruckstell.

The complete assembly, in the attached photo, was under my 26 Roadster and is in excellent condition. Thrust washers, gaskets and new bearings should be all that's needed.

Most if the parts...

Would anyone be open to trading your 19 or 20 coupe for my 15 touring? The touring is well equipped with whatever anyone would want but we can discuss details. What do you have.
Frank at 818-254-6797

I am assembling parts to install a Stewart 160 speedometer on my 22. I am looking for the bracket for mounting the speedo head to the metal dash (see picture). Please get in contact if you have one you would sell. Thanks

I have several keys left, but Sold out of these 53,55,58,59,63,64,67 and 69.

Still have other numbers while supplies last.

$8 ea includes shipping to lower 48.

Thanks to all that have ordered keys,
fordrelic

On March 18th I hosted an ignition system clinic at my shop. About 18 members attended enjoying donuts and coffee with a shoebox swap meet before hand. Using a variety of parts and tooling we went over the basics of the model T ignition system. I think everyone picked up something and I had to dig a little to answer some of the questions.

With...

Excellent condition low head. Spark plug threads are all good. $225.00+$50.00 UPS shipping. Check or money order. Email me through this site. L1.jpg L2.jpg L3.jpg L4.jpg

A number of folks who expressed an interest in these have failed to follow through, so I am left with a few spares that I did not anticipate having. Contact me through email if you are interested in owning one. There is not an unlimited supply and I am still conflicted as to the real need/demand for these things, so please understand that it is...

Anyone bringing good usable ‘22 fenders to Luray this year? I may be in the market if price and my wallet can come to terms.

The dise brakes are sold thank you mtfca

Limited quantity of NOS Kingston coil points.
$7.50 per set.
Free Delivery to the Portland Swap Meet this coming weekend.

for sale ... reproduction quick bolt set for models A and T Ford main bearings ... these are made from grade 8 bolt stock and 1045 steel ...all US materials and manufactured by me , here in USA ... introductory price of $250 plus $15 postage in lower 48 states ,includes the 6 bolts , nuts and quick keepers for ends ... i will add photos this...

Being on the road it is essential to 
do preventative maintenance on my
enclosed aluminum car hauler trailer.

If you trailer your Model T or other vehicle
this is something you might be interested in.

I usually stop at Johnson RV Surplus
because it is right off the I-80 turnpike 
just east of Elkhart, Indiana:

@ 

But that is not always...

I have several complete Model T chassis' available for purchase. All late model years. $500 to $1500. Come take a look. Cash and carry. Located at the garage in Lake Elsinore, CA. Mark Chaffin (951) 805-0928

So I want to make sure I get the layering correct. Got my kit from Classtique ( a very well made kit!!). For a 26 touring. Starting from the vinyl to the springs for the front seat back.

1. Vinyl this has a layer of cotton and then burlap secured with the buttons that are on the rear of the seat.

2. Next 2 layers of cotton that was marked...

Brass Single twist horn and fittings made by Standard, pictures to your email or text. Asking $275 plus shipping by USPS Priority Box. Jim

I just spoke with Debbie at the Fair Grounds. If you want a space for this year's event, please contact Debbie, or me, by this Friday. They want to close the registration by April 3rd. Debbie's phone number is: (five five nine)686-four seven zero seven. My number is: (five five nine)967-zero one one two. You really don't want to miss this event....

Forum Chums……
This is off topic….if not of interest or not allowed please remove…..two videos to follow from my bailiwick…..you folks have taught me so much about the Model T and my new venture….thought I’d share my area of a little knowledge……I love wrenching in all iterations!

Part 1

Part 2

A Kingston five ball with updraft and intake manifold $450 plus shipping.

for sale: 2nd ad...(sweet potatoe) sediment bowl with Ford script and part #T2085 $50 plus shipping
20230326_163920.jpg

144 issues of Vintage Ford published by the Model T Ford Club of America

$75 for the entire collection

Local pick up in south Minneapolis or I can deliver them to Bob Peterson's April 22 swap meet in Kenyon, MN.

Years, volumes and issue numbers listed below:

1969 - Volume 4: 3, 4, 5
1970 - Volume 5: 1, 3, 4, 5, 6
1971 - Volume 6: 1, 3, 4, 5,...

Found some of these bolts in some NOS stuff. Anyone have ideas what it might be for? I was thinking maybe TT rear spring clamps?
Have not gotten size yet, but will if needed. Thanks Dan
BE394AA5-30E1-4202-987F-798E50922899.jpeg

These are great looking period nickel plated cast brass door lever extensions for all three Model T touring car doors. The knobs on these raise above the tops of the doors for easy access. Asking $65 for the set plus postage. THESE HAVE BEEN SPOKEN FOR, THANKS!
Door Lever Extensions.jpg

Please use this email address below and NOT the personal...

Pair of Air Friction carburetors in good condition for rebuild.They have Isinglass windows (Mica) on both sides of the fuel bowl so you can view the gas level! Asking $60 for the pair plus postage.
Air Friction pair 2.jpg Air Friction pair 3.jpg Air Friction pair 3.jpg air friction 4.jpg air friction 8.jpg

Please use this email address below...

Noller Conversions is officially retiring after 23 years, and am liquidating all the remaining stock. All items are new. I have four Mainbearing molds and three Rod Bearing molds. I will take $75.00 each for them plus $9.00 for the freight. These are the same and the ones i used to sell by Langs. I have about 25 brake backing plates for $30.00. I...

Spring is finally here!

Learn about the art of coil testing and tuning here:

Webinar2.JPG

Get the tools needed to keep your Model T coils
running at peak performance all season long: www.modeltecct.com

ECCT and AFSW.jpg

Most of All, Have a Safe and Enjoyable Touring Season!

I got home tonight and found a prize in the mail box! Many thanks to Mike and Keith for your kind gift of the beautiful
Prest-O-Lite wrench, very much appreciated! You guys made my whole weekend! :D
Kind Regards,
Rick Rice

This is a new never used Aluminum body timer setup for a Fordson tractor but could be rewired to fit all Model T's. The length of the armored cable housing is 24 inches and the longest wire is 33 inch's from the timer body. A new brush from the vendors for these sells for $42.95 alone. I am asking $85 for the complete setup of timer and brush,...

front timing cover centering gage … this is the tool used to center the timer recess to assure uniform timing from cylinder to cylinder … this is often overlooked when re-assembling an engine and a poorly centered timer will result in poor performance … this tool centers the actual timer recess to the camshaft ...NOT the much smaller design that...

Model T ball cap re-babbitted and bored to Standard or you specified diameter ...price is $50.00 + exchange + $17.10 priority flat rate mail in lower 48 states or actual postage outside this area or INTERNATIONAL ...Gene French 970-581-2808 or gfrench1953@hotmail.com
ballcap.jpg

Spoken For - These are in excellent original condition in their original box's. Mount the reflector's on your car and display the box's on your collection shelf . Asking $75 for the pair plus small flat rate postage in the U.S.
Tiger-ey reflectors 1.jpg Tiger-ey reflectors 2.jpg Tiger-ey reflectors 3.jpg

Email address below and NOT the personal...

General Discussion Forum is stuck on March17. Other forums are fine and up to date.

Whether you use Schrader, Dill or Bridgeport tire valves, the choice is yours. I like 2 3/4 valves as opposed to the original 3 length. You still use the same number of threads, and there is just enough room for the rim nut. With the dust cap installed you can't tell. Why? Probably that 1/4 cuts down the weight somewhat.
As for the new rubber...

The roadster pickup and an A from Bardstown, Ky. are in an online auction, earlier today I thought for sure the delivery truck was on there but I don't see it now, there is a huckster on it. You'll see a Studebaker Lark on there, I was told today that's the only car left in that lot that's not sold. These were from the thread months ago listed as...

FS one set of 26/27 Spindles to be restored, comes with new bushings to be installed and spindle nuts and washers. Threads are in good condition.
Asking $100 plus shipping by USPS Priority mail. Jim

August 22nd

Subject to availability

Free enclosed transport along my current route
[from Gallup, NM east along the I-40 corridor
to Corbin, Kentucky

12A1E508-5FAF-4448-8328-AC212978CAF3.jpeg

If you attended the 2023 Chickasha Swap Meet
as a private shopper - visitor - vendor
I want to personally Thank You.

Free transport does not apply...

for sale: gear with Ford script. In good condition $25 plus shipping
20221020_111549.jpg
part #T415B

for sale: spindle arm with extra hole for cable. like new condition with castle nut $50 plus shipping
20230321_125242.jpg

This is a over hundred year old Model T accessory new in the original box. Measures 4 x2 x2 . Asking $45 plus postage.
equalizer 1.jpg equalizer 2.jpg equalizer 3.jpg equalizer 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Hi, I am trying to help a new Model t owner fix up his 1926 Model T and hes looking for a good working 6 Volt Ahooga horn, Thanks again for your help. God Bless! Tony

Very nice ready to bolt on 4 ball Kingston carb. 300$ plus shipping.

Call / Text or Message me thru the site.

248---- 495----3974.......

Thanks,
Mark

Here is an early fan hub and arm for sale. What you see is what you get. Turns but hub has some wear In belt area.
$10 + shipping. Email me at address in pictures. Thanks Dan
B2D12FBF-8704-4A37-86A9-6BCFC3D36491.jpeg
9C29663A-EB78-4ACA-B479-BEDE24EE7208.jpeg
13B0AF68-CCD8-4EE7-922B-283594E22A96.jpeg

One brass Aermore exhaust whistle $100 with free domestic shipping. Mark Chaffin (951) 805-0928

aermore 1.jpg

aermore 2.jpg

One new Bosch front plate drive shaft new (BPS-1). Retail price is $39.95. Get this one for $35.00 with free domestic shipping. Mark Chaffin (951) 805-0928

BPS-1.jpg

Hydraulic brake setup / booster. Rebuilt by a Model T enthusiast for use in his modified Model T. Price is $125 with free domestic shipping. Mark Chaffin (951) 805-0928

Brake Booster.jpg

I need to buy two original radiator springs for my 1927 coupe.

If anyone wants to trade, have 3 rears. Can deliver in Arizona or SoCal. Thanks!

Condor Brass Bulb Horn Works fine when blown into. Takes a standard horn bulb sold by Model T parts vendors. Will polish up nicely. Asking $65 plus postage. Condor horn 2 (1).jpg Condor horn 2 (2).jpg Condor horn 3.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks.
email.jpg

Sold
Cross country spark plugs
1/2 pipe plugs
Asking $40 to your door in lower 48 elsewhere be calculated beyond that
Nvbob
Jalopyt@yahoo.com

Hello guys,

I got some parts I'd like to move on. Got the usual hoarding parts, axle housings, high heads, later blocks. Also have a decent pair of 26-27 front fenders and one rear. Have a single DB front axle I'd let out of the hoard too. I prefer local pickup in Lake Stevens, WA. I can get pictures and get shipping quotes if there's something...

Sold pending payment
26/7 spindles in great shape ready for your bushings
And paint asking $135 to your door in 48 states
Nvbob
Jalopyt@yahoo.com

I have an old T trailer that I am trying to get on the road and am looking for some rusty ugly but usable bits to finish it. It is definitely in a heavily antiqued state that I kind of like so the anything else that I put on it needs to match. All I am needing is bolts and nuts for mounting the rims (8 total) a single hubcap and one useable but...

If you are interested in selling a Model T Ford Magneto Gap Gauge Tool - KRW Reproduction… please message me.

Looking to have a Model T transported from WV to MA. Flexible on timing, experience hauling T s required along with references. Please PM me with contact info.

for sale: upper water outlet and pulley $100 plus postage

email melbanolan@aol.com or text 314-575-7115 for pictures

for sale: engine splash pans in very good condition $100 plus postage

email melbanolan@aol.com or text 314-575-7115 for pictures

Rebuilt Kingston L4. On my shop shelves for the last four years, never installed. $115.00+$17.00 usps shipping. Check or money order. Email me through this site. KK1.jpg KK2.jpg KK3.jpg KK4.jpg

Rebuilt Kingston L4 carb. On my shop shelves for the last 4 years, never installed. $115.00+$17.00 usps shipping. Check or money order. Email me through this site. K1.jpg K2.jpg K3.jpg K4.jpg

Model T Ford 1925 right rear sedan fender original paint, this has been stored indoors for over fifty years. It doesn’t fit either of my T's, so I priced it to sell fast. $150 plus shipping or free pick up in Bay City Michigan email wschubert@sbcglobal.net or text / call 989 671 7594

Just what title says. I can't find my original copy. Smudges O.K. as long as book is readable. Reply by message on forum or email. Terry Woods

Here are two, kerosine lamps marked Dietz Eureka and probably date from 1915 or earlier. These are in great and original condition. The glass is good on both lamps.These are both 7 1/2 tall and have 4 in diameter for the doors. They are complete with the burners, etc.

The price is 125.00 for BOTH including FedEx Ground shipping with insurance in...

for sale: vaporizer intake manifold 1926/27 $15 plus postage

20230316_144115.jpg 20230316_144106.jpg

20230316_125051.jpg
for sale: fan, pulley and bracket $40 plus postage
20230316_125044.jpg 20230316_125051.jpg

Hello all!
While I am not a model train member, i just want to pass along that on Saturday 18 and Sunday 19, there will be a Train Show at the Lena Winslow School.

Lena-Winslow Elementary, Junior & Senior High Schools, 401 Freemont
St; 10am - 4pm; Lunch available 10-3pm; Admission Free, parking
free, donations appreciated; Roger Schamberger...

For Sale: Complete set of 1926-27 Model T Fenders for touring and sedan. Right front fender is New Old Stock other fenders are used but in good condition. The fendors will be at the Chickasha swap meet in Oklahoma. Will be there till Saturday. They can be picked up there.
$1150.00 for complete set. Can't place but 5 photos here. Call for more...

F-S Original Carburetor heat pipe, pre. 1926-7,nice condition, some very light surface rust 15.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

One more $30.00 plus shipping
Tom Butterworth
772-475-9142

Looking for a door striker and a rear spring clamp

Does anyone have a nice clear pic of the window channels in a TT steel cab? I assume there is one since the glass is 1/4” and the opening in the door pillars 5/8” or so. I can make a felt lined wooden or aluminum channel easy enough, but would like to see what was original. Thanx.

FS KW Master Vibrator In Good Original As Found Condition With Original Finish $75.00 plus shipping Greg 612 940-5972 gregps@msn.com

FS 1911-1914 Right Side (passenger) Headlight Fork Good Used Original Ford $50.00 plus shipping Greg 612 940-5972 gregps@msn.com

Over a hundred years old new in the original box. Measures 4 x2 x2 . Asking $55 plus postage.
equalizer 1.jpg equalizer 2.jpg equalizer 3.jpg equalizer 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!

email.jpg

I'm looking for the battery horn switch 'guts' for my '26, the Bakelite cylinder with the horn wire connections on one end and the brass switch contacts on the other. I have a NOS horn button and mount. I know the complete assembly repro horn switches are available and I can go that route, but all I really need is the electrical part. Thanks,...

Set of bodies for accessory spring loaded wishbone and tie rod ends,

Pair of original era accessory outside oiler fittings. $35 pair, domestic postage $10.

There is an Allen Rotating Spark HCCT on eBay.
I have no connection to it.
It neeeds restoration.
It looks like the parts for the rotating spark indicator are missing.
The meter shown is incorrect for a HCCT (as stated by the seller).
It is a DC ammeter - the HCCT uses an AC Ammeter.

Thst being said, it looks like a nice project albeit a bit...

In some stuff I got is a reground cam with Jim Wade regrind 255 lift written on box. Anyone know who Jim was? Did he regrind cams or did this come out of his engine? Stuff came out of middle Tennessee.
Any info will be appreciated. Thanks Dan.

THIS ONE SHOWS NO WEAR, HAS CAST BRASS LEVERS. CLEAN BOWL WITH CORK FLOAT THAT LOOKS GOOD. $289. SHIPPED IN USA.

Allen HCCT meter mount plates are now available.
I had some cast recently (raw castings shown).
These are cast from aluminum.
Original ones were cast iron (or steele).
Drilled, taped and ready for meters.
This part is commonly missing or broken.

$55.00

Bob Cascisa
RMC Engineering Services LLC
360-620-3226
bcascisa@comcast.net
 
IMG_0454(1).JPG...

Pretty nice Model T frame, front end and rear end. Surface rusty but not terrible. $300 OBO

Enjoy !

@

FJ

Empty f250 and 16’ car trailer going from West Winfield to Lancaster Ohio the week of March18. Will haul anything out or back or to points nearby or in between.

Is there anyone fairly close to Detroit going down to Chickasha who can pick up a set of Demountable wheels for me? I’ll gladly pay you for your help! Bill 586-651-5760

I’ll be going from West Winfield NY to Lancaster Ohio sometime between March 18 and 25. I’ll have an empty F250 and 16’ car trailer. Returning with a small car on trailer. Will transport out and have some room in truck on return trip. Contact me if you need something moved to Ohio or to central NY or points in between. Reasonable rate. Thanks.

This group of parts

Set of 5 covers and nuts $45, domestic postage $10.

Here is a brand-new decal never been mounted for an early prestolite tank. This comes with two decals. 1 is the the main decal that has all the information and the second is the long prestolite logo.
$25 plus shipping

mikebird@lifeattheridge.net or five (7) four 5 (8) four 6 seven (44)

IMG_2185.JPG