MTFCA Forum

The History Guy (THG) on youtube discusses the history of station wagons. He starts the timeline with the depot hack Model T.

On the model C speedos there is the large brass knob on the right of the housing. What does it do? I know the other knob/pusher is the trip counter reset.

I've been looking, without success, for the compression boost from the domed pistons offered by the vendors. From stock 4 to 1 to ???

Anyone know or have a feel for it?
Walt

have rocky mountain trans on TT Truck it is stuck in Neutral
truck has not run in years
anyone have breakdown on Rockys Mountain Transmission
best way to free it up ?
thanks tom

Looking for a nice font for the Victor cowl light for my 1914 Touring. This is the Black and Brass style. Jim 970-373-8864

1913-1914 early 1915. Bergs Made, Round Tube Radiator Kit. Very nicely made components and much heavier gauge material when comparing to a Brassworks. Inlet and outlet connections are solid cast brass , and core fully soldered by Bergs. High Quality.

Have many more up close photos.

Can ship but would be best to deliver to Chickasha.

$750...

Speedo wheel gear and plate. $100.00 plus postage
Original ammeter. $38.00 plus postage
Whirligig original. $13.00 plus postage
Dome light cover original. $12.00 plus postage
Mangan mirror for headlight no cracks $30.00 plus usp
Carb pipe original. $10.00 plus postage
T5030 complete wire loom new fits 1915-1922 T’s
$15.00 plus postage
Black side...

door striker plates, these were mixed in with T ones, any idea what they may fit? Bob

I am looking for one of the metal lids over the gas tank for my 22 roadster. I would like one with the hole for gas cap. Smith and Jones show reproductions in the catalogue (see the photo) but they are experiencing some delay. Before I put one on back order I thought I would see if anyone has one on hand. A good or original or a reproduction would...

Hey as some of you know I am getting a 24 Coupe and will be moving the seat back. I think the Coupe has the proper upholstery but I would like to see some additional examples. Thanks again.

Door lock for 1915 right rear touring, not stuck works well but needs a spring, $15, domestic postage $10.

Here is an original radial engine radiator cap ornament. The solid aluminum blade is a replacement. It needs to be drilled for a shaft, and an appropriate sized bearing inserted inside the radial engine for the propellor shaft to spin on. Easy project for the creative tinker. These are very hard to find, the blades are not being reproduced in...

25 windshield stanchions, extra part from a recent restoration, epoxy primed. $65.00+$22.00 shipping. Check or money order. Email me through this site. S1.jpg S2.jpg S3.jpg S4.jpg

Wanted, cast trailer hitch, same as the style shown in the photo.

Photo borrowed from a previous post.

Thank you in advance.

Andy

1926-27 Model T Windshield Stanchions. Very nice matched pair. Need to be cleaned and painted. $185.00 + Shipping

Has any one done a speedster front suspension using a 2 drop front axle, with the early style perches, a double wishbone (above and below the axle) mounted to the engine pan (not on the outside of the frame) , reverse eye spring and 26-27 spindles? If so, how did you set-up the tie rod and drag link?

For Sale: Peining Hammer $225. with free shipping in US only. Head diameter measures 1.183 inches. I don't see any markings on the tool. The ad below is for a K.R. Wilson tool. Call or text (248) 894-75fiveone. Thanks, Walt

One says ford b t7258 the other doesn't. They are the same though. 30.00 plus shipping. ctleonard64@gmail.com IMG_20230131_125337461.jpg IMG_20230131_125322219.jpg

Wanted 1 side lamp bracket like pictured. meyre14t@yahoo.com

Nice shape, float looks plenty good enough to reseal and use, $85, domestic shipping $10.

Catalog price $22.00 $200.00 plus shipping

I'll take a pair, but I really need the right rear. I'll pay for shipping if you're not within a reasonable drive of St Louis, MO. Thanks.

NOS. Only $80 and doesn’t take up any garage space. Is new in the shrink-wrapped box from a decades old collection. Has been in clean, dry, dark storage. Box is pristine white, no yellowing or dirt. Suitable for display or building. If you buy this one AND the other one I have for sale, I’ll ship for free in the continental USA. Email only. Do not...

NOS. Only $80 and doesn’t take up any garage space. Is new in the shrink-wrapped box from a decades old collection. Has been in clean, dry, dark storage. Box is pristine white, no yellowing or dirt. Suitable for display or building. If you buy this one AND the other one I have for sale, I’ll ship for free in the continental USA. Email only. Do not...

Perfect Lunckerhimer pump works great pluse the nicest guage I have ever seen.
$500.00 plus shipping
Tom Butterworth
772-475-9142

The wheel gears will not load to this site for some reason but can email them to you

1 clear and 1 red lens for oil lights. Has metal edge.$25.00 plus $12. priority mail. Personal check with hold. NO PAYPAL.
Bob Giles
divco100b@icloud.com

I am looking for the needle in the haystack. Here is a picture of the upper windshield hinge screw and washer on a 1916 sedan. They are missing on the opposite side. I believe these were used on the 1915 and 1916 closed cars.

The washer reads: JOS. N. SMITH & CO.
PAT. DEC. 15, 1914.

If you can help, send me an email or personal message through...

Here is a nice pair of Improved Car front spindles. The threads are excellent. They have been cleaned, glass beaded, and have new bushings installed. The bushings have been properly line-reamed to fit the new spindle bolts. The oilers are not installed so you can make them face front when installed to your axle. New spindle arm bushings have also...

1915 Model T Touring car, possibly a rare “wide track” model originally sold in the Southern States. Car has a slightly wider wheelbase (~4 inches), which was originally designed for following cotton wagon ruts in the road. Uncommon, period correct suspension damper setup.

Engine and transmission were rebuilt (aluminum pistons, .270 cam, lifter,...

21-25 and 26-7 Front Frame Bearings. In good condition. $45.00 for the pair+$17.00 usps shipping. Check or money order. Email me through this site. C1.jpg C2.jpg C3.jpg

With regrets I have been selling part of my car collection. Sold 4 cars in the last month This is a 1927 Touring Great shape wire wheels One small tear in back seat I have not had time to use it. Remaining problem the seller started it right up nice, ran smooth drove it up on my trailer. it has the vaporizer carb I have not been smart enough to...

1926-27 Clutch Pedals. One rebuilt with a pressed in steel slow speed fitting. The second pedal has the slow speed fitting brazed in and needs finishing and a new shaft. $50.00 for both pedals+$22.00 shipping. Check or money order. Email me through this site. C1.jpg C2.jpg C3.jpg C4.jpg

I made a deal on one and payment is on the way. Thanks to the folks who offered me gears. They all looked good and I wish I needed them all.

I am just about to build my new wheels and while everything is apart I would like to fit a drive gear on the right front wheel. Towards that end, I am looking for a correct Stewart speedo drive gear for a...

Looking to buy an oil can & bracket for my model T.

No glass, just the bezel. 25.00 p.p. ctleonard64@gmail.com IMG_20230127_092530796.jpg IMG_20230127_092518502.jpg

50.00 for all 4 plus shipping. ctleonard64@gmail.com IMG_20230127_075621073.jpg IMG_20230127_075557285.jpg

AC speedometer gear with mounting bolts and sleeves.
Make offer
Scott Elliott
971-5O6-94O2

I am trying to respond to a few e mails on the forum and all are getting kicked back, never had this happen before, anyone else having issues, Bob

I was told this is for a 1915-16 but nothing to compare it nice and sloid will beed the river or pin at the bottom replaced measures about 31 1/4 long.
oval bow
35.00 plus postage,
Bob
815-633-7244
modelt2001@comcast.net

Nice brake pedal for 1926-7 the shaft looks good outer threads look good inner threads will need chasing or just replace the shaft 35.00 plus postage, Bob
815-633-7244
modelt2001@comcast.net

Trying to cover all basis. Have 32 roadster looking for top bows and irons. Any help appreciated!

Wanted - one or two good felloes for 30x3-1/2 wheels

Model TT Wheel puller matched up to hub cap that I have asking $80.00 shipped to your location call Matt at 503-824-2681

NEEDS A CORK FLOAT AND THE THROTTLE BUTTERFLY DISC. $100 POSTPAID.

Looking for door handles for 1911 or 1912.
Thanks
akrendo@gmail.com

Go to www.antiquecarrun.org and you can print your registration form.

About how many square feet of upholstery material is needed to do a 1927 touring interior not including a top?
Thank you.
John

For sale: Brass spider. Good condition. has a few scratches. Should clean up good. $200 plus postage
20230125_123403.jpg 20230125_123346.jpg

The 66h Annual Tour of the MTFCI will be in Baraboo, WI this year, July 16-21.

You can find information at our tour website:

We hope to see you there!

Bob Solak
2023 MTFCI Annual Tour Chairman

4 caps two steel two brass $30.00 shipped to you call Matt 503-824-2681

For Sale pair of T-2566-B brake shoes from Macs asking $75.00 shipped to your door call Matt 503-824-2681

3 volumes. Great reference for Model T accessories. No pages missing. $75 plus shipping to 48 states only. Keneally book,b.jpeg

Was looking for something and found this. Jay made a list of his Accessories post. Thought you would like a link to it. Many thanks to Jay for doing this.

Original drive gear for Delco clip on distributor. This is the one that is always lost or missing. Nice shape- very little wear.
$35.00 plus $12.00 USPS.
please e-mail dmcgears@yahoo.com. Payment via check, mo, friend to friend PayPal.

gear 2.jpg gear 1.jpg

26-7 Coil box. Complete with good clasps. Should be re-wooded. $40.00+$25.00 shipping. Check or money order. Email me through this site. C1.jpg C2.jpg C3.jpg C4.jpg

Pair of 1926-7 Fender tie rods. Model T accessory. $50.00 for the pair+$25.00 shipping. Check or money order. Email me through this site. T1.jpg T2.jpg T3.jpg

1927 Headlight buckets. Includes rims. Note one bracket repaired. Good solid condition. $40.00+$25.00 shipping. Check or money order. Email me through this site. H4.jpg H5.jpg H6.jpg

1926-7 Headlight buckets. Good solid condition. $60.00+$25.00 shipping. Check or money order. Email me through this site. H1.jpg H2.jpg H3.jpg

$30 each or $50 for the pair. Please email if interested. Do not post here or pm. Include your complete shipping address so I can figure shipping. Thank you.

01C7F091-C743-44E2-99F9-519B2A747D11.jpeg

70279E6B-126C-4F8C-B3C2-567B94E40388.jpeg

This is an Excellent Quality TT standard worm gear. Discoloration on the worm & bearing races is just dark spots or staining. It is nice and smooth all over. No rust or roughness. It has nice smooth bearing surfaces. Nice smooth surface finish and lack of rust is really important on these. $175 takes it. Please email if interested. Do not post...

You get everything pictured for $50 ! Email if interested. Do not post here or pm. Please include your complete shipping address so I can quote shipping. Thank you.

6BE6D089-C4A7-4027-8397-EEF89F0113F6.jpeg

52A8128A-14A3-4E87-92B4-A72A5534C9C1.jpeg

Here’s a set of 4 TT shoes that have been ultrasonic cleaned in hot solvent to get as much oil as possible out of the linings. The linings are decent and the shoes are all in good solid condition. If you have much experience with TT’s you know that rear brake shoes are often found broken and no reproductions are available. $300 takes the set....

Looking to purchase solid 21 Demountable Ford Rim(s) that are straight and are complete. Feel free to PM condition and price.

Thanks!!

Interesting table lamps on tbay. Your wife won’t let you buy the hula lady lamp you really want, but maybe she will let you have these to bookend your couch :)

I’ve managed to find good original or NOS parts for a 23 touring I’m building that belonged to my wife’s great grandfather. I would like to find a set of front floorboards that are useable or repairable. Rears would e a great bonus. This is a early low cowl metal firewall car.
Thanks

I have a good start on a scratch build. I'm collecting parts as I finish up my 30 model A. I'm looking for any type of T body in decent condition, no speedsters must be original henry ford steel. I'm looking for something within a 6 or 7 hour drive of East TN. Thanks

For Jeff; when getting on the site from my laptop icon or entering the url address sent to a page that says Wordpress. Can get into the site by entering MTFCA Forum. There has been discussion over on Ford Barn about this problem as well, a question about if the site has crashed.

Weld on brake pedal head with A-C Brake . For you AC brake users that want to use the original pedal. Cut off the ford pedal head and weld these on.
I have several of these available. Please e-mail dmcgears@yahoo.com
$25.00 each plus USPS Flat Rate shipping.
KIMG0105.JPG
KIMG0104.JPG
KIMG0103.JPG

Nice used parts that have been ultrasonic cleaned. Inside of spool is one of the best I’ve seen. Rollers and sleeve are close to standard. Sleeve was a very good press fit on a standard driveshaft. Is not worn inside and no cracks. Good used parts, everything fits together with minimal play as it should. Email if interested. Do not post here. Do...

Non starter ignition switch and key with ammeter block plate and light dimmer. $125.00+$15.00 shipping. Check or money order. Email me through this site. Am1.jpg Am2.jpg

I have a late July 25 Touring that is a non-starter car that used this bracket and tail lamp. The lamp is a Jno Brown Ford-O. The light and bracket are original and unrestored. Ford part numbers for the bracket are 3662 B or 3660 E. $250.00+$40.00 shipping. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg

For Sale Accessory Starter for cars built without a starter - mounts on drivers side of block needs chain between crank and unit very heavy no shipping asking $200.00 give me a call 503-824-2681 Matt

Brass, original Michelin dust cap. $30.00 with free shipping lower 48. Pick up in Johnstown, Pa. for $20.00. Personal check with hold. No electronic payments accepted.
Bob Giles
divco100b@icloud.com

For sale 1927 Body very straight no rust out includes seat springs-dash -window regulators-garnish mouldings- windshield -gas tank- asking $2,250.00 wont find a better one-give me a call 503-824-2681

Couple of drive plates fs. 25.00 each plus shipping. ctleonard64@gmail.com IMG_20230118_121623059.jpg

Looking to buy small prestolite tank, motorcycle size.

B9719357-E173-43C1-BBCB-BD75F911E159.jpeg

License plate with lamp holder and spade to mount. 60.00 plus shipping. ctleonard64@gmail.com IMG_20230117_141651138.jpg IMG_20230117_141703636.jpg IMG_20230117_141642137.jpg

check it out, Bob

10.00 plus shipping . ctleonard64@gmail.com IMG_20230117_132747840.jpg IMG_20230117_132806136.jpg

Looking for a good used differential ring gear for my 1927 Touring

Lubri-air controls fa-250 filter .Bellows-valvair. who knows? Good looking shelf device. 10.00 plus shipping IMG_20230117_121833089.jpg IMG_20230117_121841855.jpg IMG_20230117_121856353.jpg IMG_20230117_122002124.jpg

1/2 shaft.20.00 plus shipping. ctleonard64@gmail.com IMG_20230117_093025164.jpg IMG_20230117_093032768.jpg IMG_20230117_093020771.jpg

Overall good condition. Has a dent in the top and one on the corner. Thumb wheel spins as should. Glass is good. 70.00 plus shipping. ctleonard64@gmail.com IMG_20230117_082543375.jpg IMG_20230117_082554536.jpg IMG_20230117_082607602.jpg IMG_20230117_082616228.jpg

Nickel plated brass rear TT hubcaps. Not perfect, but in excellent shape. $50 posted to your door. PayPal for payment.
Allan from down under. 20230116_121826.jpg 20230116_121851.jpg 0 20230116_121441.jpg

Very good wheel with wooden rim, will need a bushing in the center. Sold

Jno Brown Model 115 taillight, steel top. Black and brass and steel light for 1913-14. $120.00+$15.00 shipping. Check or money order. Email me through this site. St2.jpg St1.jpg St3.jpg

SOLD: Soft cover edition of the book Model T Ford by author Bruce W. McCauley printed by Krause Publication. Soft cover with very minor water stain. Very good condition, binding not cracked. $50.00 plus actual postage.

Good morning. Anybody know what these are for? Thank you IMG_20230116_103956829.jpg IMG_20230116_104010627.jpg IMG_20230116_103923560.jpg

Does anybody have any plans or patterns for a cowling from the 1914 firewall back into the seating area? I want to streamline my speedster a bit. OR.............could a donor metal cowling from another year be adapted?

These are stud buckles to adjust the length of the top strap to either radiator base or windshield on early Model Ts, early tops were made up with this style fitting. They are New Old Stock and sold as a pair ( one for each strap). They are made of iron and painted with black Japan enamel. $35 pair, domestic postage $10.

New Old Stock special nut with ears for padlock, this holds the spare wood wheel rim with tire to the carrier on 1926 1927 cars, Ford part number 2876. $25 each limited number available, domestic postage $10.

Looking for #1 (bottom leaf with shackle holes) as well as #5 leaf for a 1926 9 leaf rear spring. Any help appreciated. Thank you. Bill

New Old Stock bolts for ends of the tie rod, as used 1911 thru 1916 with threaded hole on top for brass oiler, for the purist! $125 pair, domestic postage $10. These are NOT reproduction but are New Old Stock. Threaded on top for brass oilers. Oiler example not included.

Wanted a Spark Ring for a Hand Crank Coil Tester, either type. Jim Golden, Bowie, Maryland

Battery box in solid condition, no rust, a few scratches and will need painted. $100.00+$25.00 shipping. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg

Ready to go, 50.00$ Plus shipping
Pm or email

Good morning-

Does anyone have the patterns for a 26/7 Roadster Interior and would be willing to share them? I'd be willing to purchase them as well. If someone has the patterns for a 26/7 Roadster Top I'd be interested in those as well.

Thanks,
James

Tom Carnegie is renowned for his promotion
and participation in The Montana 500.

He also is a supplier of Model T parts
as owner of Antique Auto Ranch in
Spokane, Washington:

@

Tom is humble - knowledgeable - helpful
and …. as it turns out …. talented in ….

@

FJ

FS rear 09 curtain straps, new. Snyders Part number T-3876 LBCE. Does not include brass footman loops. Straps are black with solid brass buckles. 09 does not have D-rings but buckles directly to buggy rail. 35.00
513 three seven eight 4235.