MTFCA Forum

I am making arrangements to get my 22 pickup shipped up to Alaska. I need to confirm the drop off tomorrow. But today the shipper told me that the height limit for a vehicle to be shipped in an enclosed container is 6 feet. The measurements I see on line say that the T is 73.2 in tall so based on that, I can fold down the top and windshield and It...

Awesome accessory rear spare tire carrier. Holds two tires. License plate bracket attached. Made by Humboldt Machine and Stamping Co. Long Island City NY. This was on the back of an ‘11 I had. It clamps around the frame/spring. Needs new leather straps. I can disassemble and get it into a reasonable sized box for shipping or pick it up in northern...

the car has been sitting for 12 years in a climate controlled shop since driven not touched. no mice put in new battery negative ground. the amp gauge shows discharge when running but when shut off turn on lights shows charge
don't know what to do HELP

Has anyone had any experience with the reproduction visor frames? I am having a hard time tracking down an original and an original that isn't all rusted out.

Looking for the 31-tooth brass ring gear. I have the 6-tooth worm, but willing to buy the complete gear set. Please reply to bowerusa@msn.com. Thank you

Dose anyone out there know this speedster... where it lives, builder??? I have some questions. Thanks for your help. Marcus... MarcusC305@aol.com / 563-340-6561

Brass knob and flat steel two hole bezel. 45.00 plus shipping. 19 long IMG_20220518_110220934.jpg IMG_20220518_110213317.jpg IMG_20220518_110228035.jpg

I have a friend who just broke his Model T crank. He is looking to buy a SCAT crank. Does anybody have a spare SCAT crank they would like to sell??

Club Crests -2(1).png Club Crests -2(1).png
Club Crests, excellent condition 200.00 Includes US postage. Contact Don Watson modelttowncarclub@yahoo.com

Ad is placed here, not classifieds at specific request of the seller.

My question is, has anyone mounted 1926-1927 bumper brackets on an early Model T.
The mounting brackets on my 27 coupe are very different from my 23 Model T.
If so, can someone send me photos of how you did it.

Thanks
George Schmidt

I'm looking for a set of nos 1919-27 front axle spring perches and a set of nos 25 and earlier spindles.

Thank you,
Stephen

For sale: Ruckstell shift lever $160., Upper radiator water outlet cast brass $40. ,Pikes Peak brake pedal $100. + shipping

Pretty uncommon carb. Zenith U6 that came with RAJO B heads. Hard to find. This is missing a few items that sharp-eyed folks might catch, but nothing that cannot be fabricated to the point of being indistinguishable from original. Good stuff is still out there. I think it's safe to say that Stan would say ZOOM ZOOM!

IMG_20220516_150849.jpg

Priced for a quick sale. I need the space. First $5,500 gets it. Runs and drives. Good title. Body has no rust out or repairs. Wood is good. Contact me via email. I do not receive pm’s from this forum. I might bring it to the Belvedere, IL Model T club swap meet this Saturday if it doesn’t sell before then. Car is in Oconomowoc, WI....

I picked up an original T1 service manual at Chickasha last March, so I am offering for sale my indoor reading T1 service manual that I did not use in the shop. This is the high quality black cover reprint that is about 5 1/2 x 8 1/2 in size that the parts vendors sell. $25 which includes shipping.

Contact information below the picture of the...

Looking for a set of original sun visor corners for a 27 coupe.

I now have also added the warranty label for Jewell HCCT ammeters.
These are property tag type labels.
Once installed they cannot be removed without destroying them.

If I have previously restored your large Jewell HCCT meter, I will send you one for free.
Send an email or message via this forum and I will drop one in the mail.

Bob Cascisa...

Title says it all. I have 5 wheels packaged and ready for delivery from I-80 in eastern Iowa to SW Kansas along US-50,
midway between Wichita and Denver. Good for some gas or diesel money if interested and going that way. Please let me know. Thanks, Mike

I have a buddy who is looking for a decent and usable 14-15 brass radiator. This car won’t be going on long tours but still needs to have a radiator that can cool. I am assuming that someone has switched out to a flat tube and has their old radiator sitting on the shelf. Maybe an opportunity to convert that radiator to cash for something that your...

Original take apart style. Contacts cleaned, new insulation to terminals.plunger sleeve bronze welded to housing for strength $69 posted to your door.

Allan from down undet

I found another original square shaft screwdriver to make another early T screwdriver. Same new handle to the original Ford drawing. $91 posted to your door. 20220515_160400.jpg

Allan from down under.

Nice set of original 1912 Torpedo rear fenders in excellent shape. $450 picked up in salem,va. Call or text anytime at 54zero-761-2three03. Pictures are just of one side. The other is just as nice and packed away in a box.

Brad

My '25 steel dash (Firewall) has three rivets in addition to the ones for the hood lacing. They were to hold a strip between the dash and the body to either seal it from water or prevent squeaking. I take some pride in making this car as close to original as possible but I don't consider myself a purist. However it was very satisfying to use some...

New Old Stock bolts for ends of the tie rod, as used 1911 thru 1916 with threaded hole on top for brass oiler, for the purist! $125 pair, domestic postage $10. These are NOT reproduction but are New Old Stock. Threaded on top for brass oilers.

Right rear door lock for 1915 touring, does need a new spring. $45 including domestic postage.

Original set of door locks and catches for 1909 1910, $385, domestic postage $10.

Rim wind and rim set angle mount clock for wooden firewall mounting, winds runs and sets properly, needs a simple mounting bracket made, $185, domestic postage $10.

Flint and steel spark ignitors for gas headlamps, complete pair, burner is not included but available for $25. $85 pair, domestic postage $10.

Trying to find someone who can work on my 1919 engine and transmission. It has severe crankshaft end play, needs rebabbiting. Transmission also needs a look-at. I've been told piston rods may be bent as well. Valves are fine. There is also an explicably large hole cut in the timing gear case, plugged by someone quite a while ago.
Just need...

In excellent as new condition. Ready to paint and install. Asking $70 plus postage.
firewall brackets 1.jpg firewall brackets 2.jpg firewall brackets 2.jpg firewall brackets 3.jpg

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

email.jpg

If you take a right from the swap meet when you come out, in a few miles you will hit Cooter's. They are having a car show on Sat. If you're a young guy like me who grew up in the 80's you remember Cooter as the mechanic on the TV sho The Dukes of Hazzard. Ben Jones who played the part has a Dukes museum there and also sings Bluegrass. There is...

Anybody have a pair of older FIRESTONE tires squirreled away? I’ll pay a premium for some 10-15 years old as long as unused and well stored. Oversized preferably but will consider any. Tmorsher@icloud.com to reach me. Can have picked up at Luray or glad to send a Fedex label. Let me know, thanks!

These are the hard to find NOS two piece vibrator KW point sets which are correct for the early KW coils. They are still sealed in their original packages, each with a two sided information sheet as shown. Asking $65 for the set of four plus postage. I have three sets of four each available. All are NOS sealed in their original envelopes.
KW coil...

I love Model T Accessories and I would love to get a Model T Kunkle Heater for my 1919 Model T Touring. Kind of like the one in the attached file.

I love Model T Accessories and I would love to get a Model T Automatic Oiler for my 1919 Model T Touring. Kind of like the one in the attached file.

Testing the waters to see if there are any TTs coming up for sale.
Prefer the C-Cabs, but keeping an open mind. A pm is fine, or email @ brooks saint ives at aol dot com (all one word).
Or call 609 920 4220. Many thanks.

Brooks

Here is a pretty nice early wheel with the original early hub and good rim. More small split in the fellow. $150.00 plus shipping. kdmks AT att.net.

Hey everyone. Just like the last few years, I’ll be set up at the Luray Swap Meet. I’m a registered notary for Virginia and I’ll have my stamp at my spaces in the back corner for any of your notary needs.

Brad
54zero-76one-23zero3

Hey everyone. Just like the last few years, I’ll be set up at the Luray Swap Meet. I’m a registered notary for Virginia and I’ll have my stamp at my spaces in the back corner for any of your notary needs.

Brad
54zero-76one-23zero3

Does anyone have a set of touring top irons their selling that could bring to luray Swapmeet?

Have Three Engines - one built May of 1920 one built July of 1920 and one built Oct. of 1923 asking $150.00 each as is you can come and open them up to check out call Matt 503-824-2681

I spent this afternoon on a creeper with my Ford. I've always enjoyed doing this, wiping off all the mist the gathers everywhere from driving on a tour. It gives me a chance to recall the many days I spent finding all the parts I needed to build this car from scratch, and the trips to Hershey and elsewhere to find it all. Of course the best part...

Combination Machine from old Ford Dealership used to rebuild Model T and A Engines. $450, Call John 651-398-4465

Is it necessary to remove the brake band to remove the low speed band?

Dave

SOLD. Thanks MTFCA

Headed to Luray and can bring along this '27 complete engine, serial 1414xxx , rebuilt new JM drums, magneto, bored, Stipe cam, alum pistons. Has lots of miles but still a good running motor.

Will only load and bring to Luray swap meet May 13-14 IF someone will buy it .....gotta move... Asking $2500 ...lets make a $deal.

Dan...

05E8B0C3-B0C1-4C19-BAB3-014B5D779B8B.jpeg BA5C9917-E6D3-4E0B-B8CF-1100EDD19137.jpeg Here is an original Martin-Parry wood cab inside and outside door handle. These have a square steel shaft with the cast iron poured right on the shaft. Has the inside handle, and the small escutcheon for on the wood door. Beadblasted and powder coated. $80 ppd to...

Yes, I know I can buy new ones, but I'd like to have a set of originals. THANKS!

This is a nice straight pair of 19232-5 windshield stantions for sale
has old primer on them, will clean up nice
85.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net no p.m's please

These are above average when it comes to TT Truck rear spring perches. 75.00 pair plus postage
Bob
815-633-7244
modelt2001@comcast.net
no p.m's please

Looking for good light rod caps will take the whole rod if needed, 26-7 style cranks that are still servicable,22-3 ,26-7 blocks will be there Thursday eve and Friday. Thanks Joe Bell 419-618-1025

“Improved Universal Cylinder Reboring Tool” for sale. Made by the Universal Tool Company. Missing some pieces but it’s a great survivor. Crate is in pretty good shape. Patent date of 1918 and pictures on the lid show a pre starter motor. Images and instructed still mostly intact. $300 local pickup in Salem va or free delivery to Luray next week....

Two nice KR Wilson Model A & B main bearing Reamers for sale. Pictures coming soon. $150 each plus the ride or free delivery to Luray. Call or text anytime at 540-seven61-2three03.

Brad

FOR SALE 2021 RockSolid White 6’ X 12’ Box with Rear Door Ramp and Side Door, with a spare wheel and tire. Ideal for a golf cart, small antique tractor or vehicle, or two motorcycles. Towed about 600 miles since new. Made in Georgia. Will be at Luray. Jim Golden, $4,500.00

I also have a very clean 1923 engine, disassembled, all machining done, with a matching-number California title.
You can see it in Luray

This is a 1915 ribbed brake or reverse pedal, used only a short time in 15. not much wear but will need a new shaft
35.00$ p/shipping

Lots of TT stuff for sale at the Rhinebeck swap. Space Y1-Y2

23 Rear Wheels w/Drums and clamps: $250 ea
23 Rear Wheel Rims: $150 ea
TT Rear Fenders excellent: $500 pr
TT Rear Rim clamps: $10 each
TT Running Boards w/supports: $150 Set
TT Springs Set: $150 (both sides)

or call: 518-755-0986

These are as new, came off a NOS potmetal Thomas timer elevator. I am almost certain they work on their distributer and timer elevator. $80 ppd to your door. Tmorsher@icloud.com 74B245C6-A53C-47A0-BAE9-15BEE553B6BE.jpeg

1913 complete column. It is the early with offset mounting hole and wrapped base. It has the flattened spark and gas rods. Never been apart.
450.00 plus shipping

This is off a 1913. It is complete and does not appear to have ever been apart. The lower half has rust through. Only one brass hinge cover. Only light surface rust on the rest.
150.00$ plus shipping

Little rusty but solid and usable
50.00$ plus shipping

13 cowl lights, original paint not rusted. The round glass and one of the jewels is damaged. No burners. Very nice mid 13 E&J lamps
125.00 each plus shipping

This is a very nice original Rubes horn for your brass era Model T, and is in excellent condition for it's age. Asking $265 plus postage. Rubes 2.jpg Rubes 3.jpg Rubes 4.jpg

Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

SOLD - 1926 Ford Model T Touring has Been SOLD

0-1.jpg

Anyone have a snubber type shock absorber that is a dome shape like this? Need one to complete a set, type of mounting bracket does not matter.
Thanks

Little rack for storage. 15.00 plus shipping. Clamps are worth that IMG_20220503_094157512.jpg IMG_20220503_094146111.jpg IMG_20220503_094240235.jpg IMG_20220503_094225027.jpg

Front and rear.will need to be straightened out.50.00 a pair or 90.00 for all four, plus shipping IMG_20220503_082906912.jpg see

Bruce McCalley's Model T Encyclopedia now available on mini USB's. The Encyclopedia is an expanded version of his book Model T Ford,The Car that Changed the World and includes data never before published anywhere else. Everything you need to know about a Model T is now available to quickly install on your computer, laptop or just carry with you to...

Does anyone have pictures or routing diagram of the fuel line for 1910. The sediment bowl is on the outside of the frame rail. My question is does it go over or under the frame. There is a hole in the splash apron that the previous owner ran a rubber line up and over the frame. I know this will create a air block. Just would like to put it back...

I need both front seats for my 27 two door coach. Prefer complete assemblies if possible. Thank you.

Olcaralan@gmail.com

Complete Jones Speedo set up. 60 MPH head with bracket, iller and outer cable, 46” ,Jones 1 to 1 ratio drive. Everything works. $850 plus $19 shipping. Kdmks AT att.net.

I am lining a set of Apco rear external bands and would like to know the thickness of the material to use. How thick is Rocky Mountain lining? I am thinking 3/16 would be about correct, any thoughts? Thanks ——Dan

This is a nice Model T period accessory. It's as new in the original box ready for you to install on your enclosed car. Asking $75 plus postage.
Stop the glare 1.jpg Stop the glare 2.jpg Stop the glare 3.jpg Stop the glare 4.jpg
Please reply to my email address below if your interested since I don't follow the email system here, thanks....

The tin is in great shape for it's age and is full of flaked graphite for use between leaf spring leaves. Asking $65 plus postage. On line at amazon this flaked graphite sells for $21.60 for a one pound can.
Dixon 1.jpg Dixon 2.jpg Dixon 4.jpg Dixon 3.jpg

Please reply to my email address below if your interested since I don't follow the email...

I have a very ratty '23-ish T that I am building to carry my family around town. I have a high cowl (in poor condition) and firewall and nothing else - no sides or body. Ideally, I'd find a complete touring body or something, but until then, I am looking for the left and right front body sides (see pic) that attach the cowl to the floor. I would...

Was a license plate combination brass lamp bracket used on the rear of a 1914? I am looking for photos of said unit for a huckster/depot hack.

Thanks in advance guys.

USED rear car axle spiral wound roller bearings part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002 wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few Ford, all are the original style spiral wound...

At long last, the biggest little swap meet in Virginia is officially less than TWO WEEKS AWAY!

It’s finally May and time for LURAY!

Looking at the long-range daily forecast, the weathermen are promising 76 degrees and partly sunny… perfect weather here in the valley for both days. And with that, I must say that this will be the last...

Looking to buy a nice drivers side TT bootscraper running board. These are a bit longer than the normal TT board. Let me know if you can help. Tmorsher@icloud.com

Today was the annual Model T Ford Club of St. Louis swap meet at GCS Ballpark in Sauget, Illinois. Forrest O'Keene and his family had a booth with a trailer full of Model T parts for sale. I picked up a pair of tire flaps, one 30x3 and one 30x3.5. These are currently on back order with many of the vendors. I also met Stephen Noll at Forrest's...

Hello All,
Yesterday I visited Dean Yoder and was telling him about something I thought had seen on this Forum this winter about a thin hard plastic or phenolic plate that someone is producing to place under the coil points apparatus to eliminate the need for spacer washers or shims. Basically creates a flat surface to place the points on. Anybody...

1914 to 1974 Ohio plates . Very nice collection. Some restored,some original. Sold as a group. $750.00 firm. Call Tim at 216-387-9544. Calls only!

New Babbitt, aluminum pistons, over sized valves, aluminum timing gear, reground crank, (magnafluxed) remagnitized magnets, new Magnitogorsk coil ring, engine number 13,307,107, rod dippers
417-732-7222 or karollee@sbcglobal.net

My cousin Dale told me he rode around Forest Park in St Louis in Corvette number 4, I think that was the number.
A friend of his dad he had a new kind of car to test drive and wanted him to come along.
It must have like this one.

Below is a transmission hogshead I bought at Tulare this year. It’s a 1911-12 style where the clutch release forks are attached to the high speed clutch shaft using Woodruff keys and clamps. The cover was complete with DB pedals and all the other internals when I bought it, but have since removed them.
Tulare 1912 Cover 1s.jpg
What I find...

Restore as is or convert to pocket watch holder. $125 including domestic postage.

Does anyone out there have a nice set of mirrors that would fit in my standard Victor Model 2 acetylene headlights? I plan on actually using them for night driving so I am looking for some good ones.
.
Thank you...Bryan

For sale: two brass windshield rod supports. Each rod is 47 long.

Price: $50.00 plus shipping

The model T Club of St. Louis is having their annual swap meet this SUNDAY 5-1-22 at the GCS Union Ballpark in Sauget, Il. NOT AT GATEWAY.
It is 4 miles east of downtown St, Louis. If coming on 255 get off at exit 15 and head towards Bellville.

1926 Model T Touring in good shape for sale. I am moving and losing space fast, need to sell. Good running and driving car with Kevlar bands and both frame number and motor match #14859153. Newer roof and upholstery, older lacquer paint is beginning to lift and chip. New rebuilt NH carburetor and running gear is clean, all fluids have been...

Here is an extra valve tool I have. Look at pictures, you will know what it is for. $10.00 + shipping. Email me at address in pictures. Thanks Dan
67CACE35-A2A6-406A-AF44-5A569431FB5E.jpeg
67F9B92E-1B86-48C8-9C16-41C3B3BF8933.jpeg
0949864A-8772-4B02-B95D-695ECFBE8F23.jpeg

Looking to buy a short length of firewall trim for a 1911. I am trying to get my windshield in position and don't want to bend my existing length of trim to shape around my current firewall which is temporary for the assembly of the car.

The trim goes between the firewall and filler board.

Thanks,
Austin
2013067112

Thought the T's with Model A's should get the first look. Priority Mail shipping estimate just $10 - depends on distance. Price is $115 + shipping
PayPal to Friend/Family preferred (my email)

Thanks you MTFCA

Handle spins freely.does have some pitting. 25.00 plus shipping IMG_20220427_143800975.jpg IMG_20220427_143807489.jpg

No idea who made this setup. The Ball cap fits tight on the tail shaft and has a neoprene seal on the back end. Doesn't look like there would be any interference with the torque tube end. email if interested email.jpg $120 plus shipping PayPal preferred

A good friend has passed and I’m helping sell a 50 year collection of parts. Looking for a dealer or larger collector to buy Model T, Model A, V8 flathead and other pre war parts. There are fenders, engines, frames, headlights, steering parts, rear ends, front ends, wheels, Etc etc. Too much stuff to list. Sorry, but Will not sell individual...

1924 Coupe for Sale. It's an older restoration but in good shape and running good - ready for touring. The car is 6 volt and retains the original Ford coils. Runs on Battery or Magneto. The car is located in Michigan, NE of Detroit. Delivery is available by arrangement. The car could also be delivered to Luray if that would be more convenient....

Does anyone know the status of Bill Beeler form the Athens Ohio are? I have emailed and called and cannot get a hold of him.

To protect his privacy, please email me with an answer if you have one. I know his health has not been good.

Thanks strickstuff@yahoo.com

TOM

Sorry, posted in the wrong forum it is now at @

Headlight fs. Pretty rough but the bucket is still good. Make me an offer IMG_20220427_101402432.jpg IMG_20220427_101408805.jpg IMG_20220427_101442169.jpg IMG_20220427_101423587.jpg