MTFCA Forum

I don't believe anyone has really said anything (-or posted any pictures) about this year's tour. To somewhat keep this Model-T related, there were a handful of Ts participating. I think there were 52 of us that started the event, -and I think there were approximately 7 that failed to complete the tour under their own power. None of which were...

need room

1908 Model S Roadster. Complete car, Canadian Built, work in progress, not running. New body with original seat section. Buggy rails and useable top. New gear case by Floyd, new exhaust and water outlet manifolds. Aluminum pistons and new valves. Rebuilt Heinze coil box and four good coils. New smooth all gray tires, tubes, flaps....

Need the room

1922 Coupe. Ricardo head, OF carb, hasslers, ruckstell, AC brakes, I Timer. New tires, tubes, flaps, top, upholstery, radiator, safety glass. Matching 1922 Washington plates and clear Washington title in my name. Featured March car in Lang's 2024 calander. $18,500. More pictured on request. Located in Friday Harbor on San Juan...

For the 21st year we will have our free swap meet at the Cameron farm, 5894 Lemond Rd in Owatonna, Minnesota. Ribs will be served as always ($10.00 donation for lunch please). Everyone’s a vendor or no lunch for you! Indoor heated spaces available. See you there…..

Nice 26-27 wire wheels hub and drum. Hub is very clean with some original paint. Drum is rusted but sand blasting should clean it up.
$150 plus shipping. Neil

I enjoyed rereading this post and thought others might enjoy checking it out to.

Hi all, I've got an 09 mother inlaw roadster body at Kim Dobbins that I need shipped to Nevada City area. ( 1 hour above Sacramento). Would easily fit in the back of a pickup bed. Anyone heading this way have room?

FOR SALE
1903/1906 Olds Replica
Excellent appearance and mechanical condition
Electric start
Modern engine
New tires and tubes
I never drove it more than 1 mile
Stored on jacks in a climate controlled garage
Spur of the moment purchase but I quickly lost interest because I truly wanted a genuine antique 1903 Olds
$5000 or Best Offer
Located 20...

Everything is brand new as I am now fabricating all the components used. Starter or Generator (use your 3rd brush holder on gens).

I’ll sell some of these to forum members.
.
IMG_0771.jpeg
.
$45 + shipping. (Compare at $60 with used parts)

I will also be selling the rebuild kits with all new components (use your brush plate) for $25+ shipping....

Original 1912 Sales Booklet in very good condition
2nd Addition April 1912
12 pages , 6 x 31/2
$125us plus postage

Original 1912 Sales Booklet in excellent condition
32 pages measuring 7 1/2 x 5
$125 plus postage
WE can't get all the photos on so if you want more please ontact us.

Original 1910-1912 Left Hand Drive Rubes triple twist horn, it has a reproduction 65 long brass tube and a repo front has been put onto the horn.
$350US plus freight

Kingston 5 Ball Carburetor #128872. Appears to be in excellent condition. I didn't disassemble it. Everything visual functions properly and is not loosey goosey. $1250.00.
Ed aka #4

In good condition with a few small bumps to the aluminum case cover. Asking $45 plus postage.
Catseye Aluninium Case Reflector 1.jpg Catseye Aluninium Case Reflector 2.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

In excellent original condition. Asking $50 plus postage.
Seeley Ignition 1.jpg Seeley Ignition 2.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

This is a hard to find camshaft gear for completing a Thomas timer. Under close inspection the gear appears to be unused. Asking $75 plus postage. Thomas Timer Elevator Cam Gear 1.jpg thomas ad.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

WTB low and brake pedal extensions.

For sale 3 differential carriers used fresh off the barn shelf with Spiders inside and used ring gears 94$ each shipped if you buy more that one we can figure out shipping

The red jewel lens measures 2 inches in diameter. This was part of a larger setup but can easily be repurposed for your car. Asking $45 plus postage.
Jeweled Marker Light 1.jpg Jeweled Marker Light 2.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Get look for period dressing. The seam on the side of one glove will need to be restitched. Asking $50 plus postage. Gauntlet 1.jpg Gauntlet 2.jpg Gauntlet 3.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Box and lid in primmer. Needs a wood kit. Comes with the original factory hardware minus a few small nuts and bolts. Asking $40 plus postage. coil box 1.jpg Coil box 2.jpg Coil box 3.jpg Coil box 4.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Firewall drip rail in very good condition. Price is $35 plus domestic shipping. Mark Chaffin (951) 805-0928

20241004_105100.jpg

Original Ford firewall bracket sets. Price is $20 per pair plus $8.50 domestic shipping. Mark Chaffin (951) 85-0928

20241004_104530.jpg

This upcoming auction has an interesting bunch of Model T parts. Might be something of interest to some of you. November 9th in Copeland, Kansas. Copeland looks to be in the southwest part of Kansas, near Dodge City.

Since the friend we share Hershey spaces with is not coming this year due to the recent flooding in our area, we are able to bring a trailer with a lot of stuff that wouldn't fit in my pickup. Bringing a 1913 T rebuilt short block with all covers and low head, 3 running board boxes, a '13-'14 T rebuilt rear end, a '26-'27 T rear end, lots of A...

Transmission band was re-lined with Kevlar but never used because I decided to stick with the cloth-lined band. It is in really great shape. Asking $75, and I will cover cost of shipping.

Hello everyone,
I would like to invite anyone who would like to join us for a nice Sunday drive, here are the details.

We will meet on 10/27 at the Mobil on the Run,
2311 Upper Bottom Rd
Saint Charles, MO 63303
Meeting time will be 8:30 for a 9:00 departure for Grafton, IL, via the Grafton Ferry.
There is a gravel lot there to accommodate trailer...

Wanted: Two 1926/‘27 Model T window shade rods, any length along with the two round ended rod holders. Jim Patrick

IMG_7219.jpeg IMG_7218.jpeg IMG_7217.jpeg IMG_7216.jpeg IMG_7214.jpeg

11-12 Mother in law seat riser. 11-14 parts. Other non Ford parts, Henderson motor, 2 cylinder Maxwell parts. Open gear steering columns. Other eclectic early parts.
No pictures, just come look. Space CO27. Steve

4 Wood Felloe Model T wheels good condition, clincher edges stright, takes 30X3 tube and tire make offer

For Sale At Hershey - 15 to 20 Model T Transmission Part Sets all pats were bead blasted, crack inspected, an covered with a thin coat of aluminum paint to prevent rust. Some with small cracks have the paint missing to see the crack. Will sell one part or all. Also have some Canadian Electric Cowl Lights, 1926 Accessory Stop/Tail Lights, a NOS...

Bringing a lot of 09-12 parts to Hershey, chassis, lights, speedometers parts, complete speedometers , carburetors , spaces CM 33-34… Larry Debaugh

Original Hyatt type spiral wound rear axle bearings, .002 or less wear and have tight cages, nice bearings ready to use after your final cleaning. No pitting, no rust, never any other than Satisfied Happy Model T owners. 3 are pictured but I can supply a set or more. Price is $75 per bearing, domestic postage $10 for 1 or 2. Free shipping on an...

SOLD...This is the interior I am taking out of my 1914 Runabout. I do not have a seat bottom. Included is the backrest cover, door, hinge strap, kick panels in good useable condition for someone not wanting a restored look. I don't think this is the original interior from 1914. 175.00 plus shipping. Art

This is a used set of 4 Universal T Driver tires and 4 rubber stem tubes. (2) 30x3 and (2) 30x3.5

These tires are about 15 years old. They have about 5/32” to 6/32” of tread remaining. I removed them due to some sidewall cracking. They would be good to use as rollers or for a car that just goes to the ice cream stand a few times a year. The tubes...

Brand new, never used complete Rajo head kit from Chafins. Also a couple of extra head gaskets for same. Will be at Hershey spot C4Y36. NO VENMO, NO PAYPAL, CHECK OR PO MONEY ORDER ONLY. TOO MANY SCAMMERS!

The Depot Hack is anolder restoration in original condition. It has 1919 rebuilt engine, carburetor, drive train. It also has parts from older T’s like 1914 brass radiator, carriage lamps, rear lamp, and front window frame. New disc brakes available. Asking $15,000 OBO. Call Cary at: 805-850-8574 or email carydritz@roadrunner.com

IMG_0227.jpeg...

Quick project for a rainy day. Made covers for my brass windshield support rods using Anti-Tarnish Silver Cloth and 3/4 inch stick on Velcro. Anti-Tarnish cloth was cut to 52-1/2 x 4-1/4 . While the support rods are fairly easy to polish, the salt air here right next to Admiralty Inlet takes more of a toll. We'll see how it goes...
Anti-Tarnish...

Morton and Brett Body replica in resin with rebuilt Fronty OHV. Rebuilt Ruxtell and Ross steering gear. Frame included 21inch wheels available This is a project that was intended but now on the shelf. Offered as a oackage only
705 828 5405. Edwardshorus@gmail.com

Morton and Brett Body replica in resin with rebuilt Fronty OHV. Rebuilt Ruxtell and Ross steering gear. Frame included 21inch wheels available This is a project that was intended but now on the shelf. Offered as a oackage only
705 828 5405. Edwardshorus@gmail.com

FS original 1908-9 Mother in law Roadster body with rear seat. Freshly Fully Upholstered in Black diamond tufted leather over horsehair
Split front seat bottoms. Full self standing top with maroon wool headliner.
Body seats painted black ready for final colour leaving the trim remaining black.
This is perfect for that chassis missing a real...

Never used TT rear axle found in an old Ford dealershiip for sale. $100 plus shipping. Can deliver to Hershey, if interested. NO VENMO, NO PAYPAL, CHECK OR PO MONEY ORDER ONLY. TOO MANY SCAMMERS!

Frontenac T head. $4,900 and free delivery to Hershey, PA. I will not ship this. You could also pick it up in person (Wisconsin, 53066). What you see is what you get; original insert guides as well as new bronze slugs to be machined into new valve guides and rocker bushings, push rods, new modern valves, valve cover, hardware. Casting has been...

Looking for any information on Strong Hold small drum brakes, pictures, directions or brochures Thanks Jim

Original 1913 Nonpareil brass horn. Original as found condition. Nice and solid, a few small dents, perfect to restore or to use as is on your original car. 125 includes shipping.

IMG_1918.jpeg

Yep, it's a long shot... I know. I will be going to Hershey. I might get lucky. why not try the forum first?

With Best, Michael

Ok. So here is my preference if you have some:

1. 2 Black smooth 30x3.5 (rear) tires to match the 2 smooth fronts I already have.

I am also looking for , in addition too ! :

2. 2 White 30x3's and 2 White 30x3.5's (front/rear set).

and, as a last resort:
3. blockley (yep, I'll do it! Don't make me pull the trigger!)

Hershey is coming. Maybe...

Original Ford service bulletins, April 15, 1920, may 1st, 1920, August 1921, February and March, 1922, special Edition, dealers convention 1920, Hinckley-Myers equipment bulletin January 1920. 7 issues, $35.00 for all. Plus $9.85 postage. kdmks AT att.net.

I have two front doors no rust and no dents all hardware with them, have plenty of paint on them! 200 a piece and will bring to hershey if notified ahead of time. 419-618-1025 Joe Bell

Hello there, some fragments i found when dismantling the starter of my '66 CJ5 have me baffled :
The starter had a tendency to lock the bendix in either the out- or the in position, resulting in the starter not disconnecting, or not engaging.
Long story short, took the starter apart and two fragments of a ring fell out, can not seem to find an...

I will have this Allen hcct at Hershey. $1100 obo. spots
c4k 31/32. Thanks Don

Hershey AACA Fall Meet is approaching. We will be bringing a large array of Used and New Old Stock items to sell as well as your pre-orders. So this means if there is anything you would like to pick up at Hershey, please let us know ahead of time as we will not have reproduction items there. We want to make sure you get everything you need so the...

Like others, I just received my MTFCI magazine which included the Ballot for choosing Board Members. While I realize this is going to seem biased and slanted, I truly believe there is something that needs to be discussed because it affects the future of the MTFCI club, -which is also a club that has been losing membership AND has been losing money...

WTB 6 Volt steering column fan

If you purchased a coil box label from me, get in touch. The spelling error has been corrected.

The MTFCA tent will be set up in the chocolate field, C4Q 34–39, as always. Stop by and meet some of your directors, our Executive Director Rachel, or just to say hello. You can renew your membership or perhaps purchase one of our newly designed hats or T-shirts. As in the past, we will have a forum meeting on Tuesday at 3 PM so that you can put a...

anyone have a 2 inch drop axle in the maryland area

New brass radiator neck $25. 1913-14 sidelight bracket $10. Sediment bulbs, 2 are brass for parts $30. NOS oil pan front casting $15. Cast steel oil pan support $125.00. All plus shipping. kdmks AT att.net.

FS one BUDD wire wheel as used on Overlands ca. 1920. You sometimes see these adapted to Model T Fords. Selling just the wheel, no hub. The OD of the wheel is 24 at the very edges and 23 where the inside diameter of the tire meets the rim. Usable condition, there are a couple of bad spokes. Asking $115, shipping not included.

budd01.jpg...

Just wanted to take a second to send a shout out to Steve Tomaso.  I was searching for a small stud for a brass side lamp and could not find anything through the suppliers or a suitable modern equivalent.  Steve read my post and jumped on it, did some digging, and I soon had my replacement.  A big thanks to Steve and everyone else here who help...

This was removed from a running car as it was deemed inappropriate for the restoration. Its 6 volt - take on the hills or add a downdraft carb
sold

…good teeth. Only $20 each. Top gear has been discarded. Two for sale. + USPS Small Flat Rate
… gwhouse731(at)gmail(dot)com

….Local pickup only. Complete. Have not removed head. The crank operates engine/tranny internals. Have hoist. Only $610….. gwhouse731(at)gmail(dot)com

FS: A 24-25 T Engine that was converted to a stationary application and later found on a farm in Oxnard, CA. The bottom end looks about average, although it looks like the shims have mostly been taken up. The pistons are stuck, and the valves are 2-piece. The block looks pretty good, however. The 4-dip pan is rotted in various places, as this...

Want to buy a front seat frame lid to go over gas tank for a 1917 roadster body. Thanks, AJ Eyre

Here is an original T era Bevin polished brass Bermuda bell. Heavy thick brass. It has a nice polish, no dents or cracks, just a few small nicks here and there from actual road use under a T. It works great, very, very loud DING DONG! when plunger is depressed. Holds the fading tone after ringing, something only original bells can do. Very clean....

I just picked up another car. The car is pretty nice but the tires are the worst that I have ever seen and I just need something that I can stick on it with some tubes so that it will be easier to move around until I am able to get it running. If anyone has anything, bald, cracked, whatever as long as they will work around the shop. Thanks.

Steering wheel lock. No sure of make. Looks like key is broken off in lock. $10. + shipping. Email me at address in pictures. Thanks Dan
IMG_4025.jpeg
IMG_4026.jpeg
IMG_4027.jpeg
IMG_0260.jpeg

One set of late style front fender irons. Price is $30 for the pair plus domestic shipping. Mark Chaffin (951) 805-0928

20240918_101422 (1).jpg

Looking for 26 27 tudor sedan front seat frames any help is appreciated

I've had a few requests for my KC Warford support brackets, so I'm making some now. These are bolt on with no drilling, and are designed for the KC Warford. They will work with an original aluminum Warford as well with a minor modification; just let me know in advance and I can make the adjustment. This supports the rear end of the Warford, and...

Accessory oiler set for the three dip pan $30.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240620_100309.jpg

One steering pitman arm in very good condition $35.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240618_095303.jpg

Gas tank bracket set for the oval gas tank $30.00 plus domestic shipping. Mark Chaffin (951) 805-0928

20240718_133623.jpg

I,m looking at a 1927 model T roadster that has no top. I wondering what are the chances of finding a complete top for this car? I hope to find something close to the Portland area. Tom 50three 644-937four

I have a project in mind that could use one of these. Has anyone got a spare to sell?

Paul

Use this as a lesson how to terminate an ad WITHOUT BUMPING EVERYONE ELSE'S STUFF DOWN THE LIST.

Junk carb - not reasonably a rebuild candidate...it is a donor carb

no float cover nut
no float
no float valve needle
no choke wire securing screw
modified mixture needle
pictures are the best description

despite the obvious problems, there remain a...

4 Wood Felloe Model T wheels- Good Condition, clincher edges straight, takes 30X3 tire and tube, wheel plate plain, $600 or make offer jferguson27@austin.rr.com 100_3301.JPG 100_3298.JPG 100_3299.JPG

The title is a bit of a misnomer since it was 3 days. We met in Virginia City, Nevada. We traveled to Carson City for a day, Reno to the National Auto Museum then a day of trains and the historic town. 11 cars and 24 people had a great time.

Andy
D88FF374-D8CA-4DEF-B5E4-346D3F282997.jpeg
The hundred mile view...

Home made mag coil winder. $25.00 plus shipping. kdmks AT att.net.

I am located in California. Willing to pick up locally if necessary. Looking for a 1926 Steering Gear Case/Cup. If it comes with cover, I am happy to purchase as set. Thank you. Lisa - Please contact me via the forum message center if you do have these items!

As I restore my 1917 Ford, I need a set of front and rear shackles. They are similar to the figure eight shackles but have no provision for an oiler. Any help is appreciated. See photo. Thanks, Russ Furstnow

I picked this up yesterday as a sound backup carb but I'm interested in its history.
I guess it was fitted to UK Model T's?

I also got -
A home made air cleaner
A rear wheel hub puller I think, you agree?
One shockie
I think the 4 brass fittings are for a wind deflector, maybe not Model T

DSCN5015.JPG

DSCN5014.JPG

DSCN5017.JPG...

I adjusted the trans bands in our '21 Touring today. Then took it for a drive. Works good again.

This is a much sought after timer elevator that moves any standard timer up to a easy location to get at for maintenance. The gears are in excellent condition. Comes with a new proper control rod that a friend and fellow forum member made for me from his pattern for this unit. Asking $250 plus postage.
Thomas Timer Elevator 1.jpg Thomas Timer...

This is a new old stock one hundred year old accessory that will automatically adjust your carburetors mixture. It uses a bi-metallic strip like a home thermostat uses. Asking $60 plus shipping. Scharoun Carburetor control 1.jpg Scharoun Carburetor control 2.jpg Scharoun Carburetor control 3.jpg Scharoun Carburetor control 4.jpg

Please use the...

Looking for a good used pedal pad assembly for a 28 with multiple disc clutch. ( goes around steering column and pedals to seal). I know they make new ones but I have an original unrestored car and new parts just stick out like a sore thumb.

Beautiful brand new trailer that I just bought. The trailer is 7’- 6” wide by 7’- 6” tall interior by 16’ long plus the 2’ V nose. Rear door fold down, led lights, plywood interior sides and floor, silver color with screwless outside paneling. I ordered the 7’- 6” wide since I like to know what is happening behind me while towing down the road and...

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Brass top tank main ring $60
Brass bottom tank mounting brackets set of 3 $24
Locking E & J side levers set of 2 $125
Brass Thumb nuts with the brass screw good for the head lights as well as the generator set of 5 $50
Brass top tank gas tap $ 60 small amount to screw the lever in
Please email daveandjand@gmail.com

Scam Warning

There is a fake website for Howell's Sheet Metal, so beware!

That fake is .fordor . us

Screenshot 2024-09-12 at 5.52.23 PM.png

The valid website for Howell's is closed now for on-line ordering. If you order from the fake website on-line you will be scammed.

Warning from friend in Jacksonville FL. who used this fake site and...

When I go out for a drive I keep an eye open for old buildings worthy of a model T portrait. I led the gang past this one room school years ago and always regretted not stopping. Today, after a nice lunch in a family owned restaurant nearby, we got our chance. And took it! Wasn't expecting the corn crowd this time but we managed! It was a super,...

Have a 26-7 short block .060 over pistons, .020 under rods, .030 under mains, hardened seats, s.s steel valves, adjustable tappets, aluminum timing gear, pre hershey price 2000. at hershey it will be 2500. Tiffin Ohio 419-618-1025 Joe, Thanks!

This is not directed at anyone in particular. It seems that lately, there are lots of questions being asked here, with written descriptions only, and no pictures. Lots of us here have seen a lot of things, but none of us are mind readers. It's also more difficult to help the newbies, who may not yet know the proper names of various parts, or the...

Reminder that Horseless Carriage Club of Missouri will be having their 45th Annual Swap Meet and Car Show. gates open at 6:30 at the Fox Service Center 849 Jeffco Blvd. Arnold, Mo.

I sold Tim a starter and he filmed a little video of how it arrived and all the surprises I include for free!

Jeff

Sold in pairs price + shipping (think USPS Flat Rate may be best way, will calcualte least cost)
All key ways look very good as do the threads. I'm planning to wire brush the threads and do a hub cap fit

--
Brown Patina $115
--
used TT rear hubs.jpg
--
IMG_6399.JPG
--
--
--
Gray (almost look NOS) $200
gray TT hubs.jpg
--
IMG_6396.JPG

2 repo hubcaps, nice , $25.00 each. 4 originals , all have issues. See pictures. All plus shipping. Kdmks AT att.net

I’d like to trade these low hood (17-22) hood shelves for a pair the later high hood (23-25) style. Looking for a nice set in similar condition to the ones I have. Not looking to sell, would really like to trade for the correct ones I need. I bought these at a swap meet thinking they were correct for my project but later realized they are not....

Q&A videos seem to be all the rage on people's YouTube channels right now, so I thought I'd try a slice of the pie, with a Model T flavor!
After trawling through some of the comments on my channel, I've whittled them down to 15 questions and put them into a video for you all.
If you have any comments or questions you'd like to ask and possibly...