MTFCA Forum

Here is a set of narrow band liners with the rivets and box, missing the top. They look useable, but you be the judge. $45.00 plus $10.00 shipping. PayPal preferred or cash or check. Please email me if interested.

For sale: radiator apron $25 plus shipping

DSC00033.JPG DSC00034.JPG

I have a few , 6 packs of the hundredth anniversary Ford Coca-Cola bottles, in Curtain, for sale. They are all in pristine condition and from a smoke free home.
I am asking $30 per six pack, plus $20 USPS shipping to the lower 48 states.( Post Office flat rate cost.)

Original pair top bow pivots
New castings
Headlamp forks, sidelamp brackets
And dash to frame brackets.
All the above are $ 125 per pair
Insured post not incl.

brackets 1 , 2, and 3 are sold and shipped.
Brackets 4, 5, and 6 are available.

#4 15-17 center door and other $45
# 5 Coupe, sedan , truck and other $45

#6 23-25 $65 pair. I have 2 pairs.

post paid lower 48

“The horse is through.” - Henry Ford

It’s been recounted over the years that Mr. Ford “hated” horses. Perhaps his disaffection for the equine race didn’t extend to a specific gut-wrenching animosity, but there is little doubt Ford’s massive incursions into personal mobility and on the farm resulted in a rapid transition from flesh and blood horse...

For sale, Oval gas tank. Sealed the tank about 10 years ago but now needs to be sealed again. Restoration supply in southern califunny is selling it. Bought a new tank before I finally found out who sells the sealer so I dont need it any more. $50.00 plus shipping . Contact info in my bio.

WTB a set of RAJO Valve side Covers.

Picture is one I had saved, believe credit goes to Chaffins Garage.

Last set available Silicon Steel centres pressed into original tubes smooth backing plates if requested. No more leaks drooping or sagging
1908-9No River $3000 1909 11 6 rivet. $2750
1911-12 12 rivet clamshell styje $2750 CNC Machinework impeccable the best quality materials. Workmanship guaranteed
Eric Edwards. 705 828 5405

Older repro pair of ‘16-‘25 pedal trim plates. $15 & Free Shipping inside the USA. Email if you want them. Please do not post here or pm. Thanks.

14CC410A-9744-420C-BA55-8650E29C4F05.jpeg

E22979AA-02C0-4D7B-B902-48AB3C1EE026.jpeg

For Sale: Firestone Oldfield nos in box Red Rubber inner tube w/ Schraeder # 725 stem. Buy it as a vintage display item or for the NOS stem & hardware. The tube itself looks awful darn good, but no guarantee on a 100 year old inner tube! $35 & Free Shipping inside the USA. Email if you want it. Please do not post here or pm. Thanks....

This is an unusual aftermarket timer and is pretty neat in appearance. Put it in your timer collection or use on your car. The contacts look pretty good and it takes the stock Ford style roller. $35 & Free Shipping inside the USA. Email if you want it. Please do not post here or pm. Thanks.

87541EFC-EAE8-49EA-80D9-7DD14C75F68D.jpeg...

For Sale: Original 5z204 exhaust manifold pack nut wrench. $50 & Free Shipping inside the USA. (That is $25 less than a reproduction from a parts vendor PLUS Free Shipping). It is pitted but will work just as well as the more expensive reproduction. Email if you want it. Please do not post here or pm. Thanks....

Here is an extremely nice pair of very lightly used Ford script timing gears. They both came out of the same engine so are a matched set. They have been ultrasonic cleaned and are ready to use. $65 & Free Shipping inside the USA. Email if you want them. Please do not post here or pm. Thanks.

C53A538F-1B44-48F2-A8BB-3B64C21A97E5.jpeg...

Here are some photos of a hubcap wrench that is non-Model T and I just wanted to know what car this is for.

IMG_6389.JPG

IMG_6388.JPG

It is thicker than a Model T wrench and weighs 1lb 4oz.

For Sale: Some moref used T parts, mostly late teens early twenties. Basically stuff I just don't have room for but too good to throw away.
Clockwise from upper left:
Starter Bendix, missing counterweight, some wear $10
Late Teens Brass Kingston Model L Body Only $10
A manifold clamp that someone milled down $1
Brake Rod Support, the end is...

I saw this and thought I would share these photos of a 1925 Fordson Hatfield-Pennfield conversion tractor.

468897212_1663846417573686_3704135670520176091_n.jpg

468637660_1748789299241441_248773811458128729_n.jpg

468644203_486450153846529_1326116784490917437_n.jpg

I have nothing to do with the sale of this tractor I just saw it on...

This is the front u-joint housing and adapter that is often missing on the cast iron Warford 3 speed transmissions. It was ultrasonic cleaned and bead blasted. $225 and Free Shipping anywhere in the USA. Email if you want it. Please do not post here or pm. Thanks.

01893908-F794-4404-9905-989A2CF81A6C.jpeg...

Exact 09-11 fan blades, die stamped w/ mounting holes. $140 for set of 4 , postage $11 US . 09-11 blades have greater pitch and deeper stamping. Langs will rivet the blades on your hub for $30. Have 7 sets left…. Larry Debaugh 4103361728

For Sale #318 Ray speedy type oil pan wrench. Special wrench for removing and installing oil pan. Holds the nut and bolt with one tool. Both 9/16-inch 6 point sockets are in great shape. Top handle rotates freely. Tool has some light pitting. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Looking for two very good 30x 3 1 /2 Buffalo clincher type wire wheels or two centre hubs that i can re spoked and re rimmed .

Last pair available. I can provide only one pair either 1908-9 no rivet. 1909-11 6 rivet and 12 rivet clamshell differential housings
Theses are silicon steel centres cast and Mishima perfectly accept standard Ford internals.
Rivets are cast in so no leaking around rivets. No sagging or drooping axles due to poor design and years of abuse
Fully...

The last of my run of 100 horns suitable for medium and large brass era autos including Ford.
No markings. $400 post/ insurance included to lower 48 states and Canada.

Original 3/4 twist Nonpariel horn no dings or dent no cracks. Nice screen. $300 includes post/insurNce to lower 48 states and Canada

For Sale two Millers Falls Co hacksaws and ball peen Hammer. Miller Falls hacksaws (No. 125) stamped Ford each. Hammer stamped Ford on one side and Drop Forged made in USA on other side. Tools are lightly stamped (Ford), please see photo's. Tools $100 each plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale: spare tire carrier clamp $10 plus postage

20241029_175207.jpg 20241029_175219.jpg

For sale: like new floor board joining plate $5 each plus postage

20241029_175041.jpg 20241029_175025.jpg

For Sale Jo. Wolf Mfr. Canton O. Pat Pndg. tire tool. Tool is used to remove and install clincher and balloon tires. The jaws used to break the bead area on the tire and the swivel end used to remove and install the tire. Price $150 plus shipping. Call or text (248) 894 75fiveone. Thanks, Walt

91CFF7D9-C123-4602-8CD3-230F89173E86.jpeg

1926-1927 Ford model T front and rear bumper brackets for sale. $450.00 call 612-710-2775

91CFF7D9-C123-4602-8CD3-230F89173E86.jpeg

I have parts to assemble 2-- 26-7 Chassis', at this time it is apart to be picked up easier and stored. Located in Ct 06013 Delivery available for cost of fuel within 100 miles. $3500 EACH,. E-mail with interest or E-mail phone # and I will call you back, Thanks, Dennis

I still have 3_--, 26-7 engine blocks For Sale appear crack free , $450 each plus shipping or pick-up in Ct 06013, E-mail for questions or send me phone # I'll call you back, Thanks, Dennis

I found 1 TT rear radius rod left over from my 6 TT trucks that are all sold as close to N.O.S. as I can see light surface rust . $75 plus shipping. Send e-mail with questions or for pictures, Thanks,. Dennis

I made up a couple of 3D printed patterns to do a casting for a rear flange for the early oil pans. These are made exactly to the Ford drawings and will suffice for doing a reproduction casting for the early oil pans.

$50 each

mikebird@lifeattheridge.net

IMG_2739.jpeg IMG_2741.jpeg IMG_2740.jpeg

Looking to buy a later style front right spring perch (T-222-B). I need it to be an original one with the Ford Script, and has the center drill & shoulder on the top side. Here is a photo of my front left spring perch that has the Ford script and the center drill & shoulder, this is what I'm looking for.

I only need the spring perch, I don't...

My dad used to post a bit, maybe a lot - not sure. I thought his handle/nicname was S561. He had a few email addresses over the past 10 - 15 years. Is there an easy way to find his posts? Dave Ireland, David Ireland, daveireland26@gmail.com, and daveireland@mchsi.com are the ways that I assume he would have posted.

Here is something I don’t think I have ever seen on here.
This is 1/2” wide by 36 yard rolls of cotton coil wrapping tape. Used to wrap mag coils or field coils or wtf you want to wrap.
Since I no longer rebuild mag coils I need to pass this on to someone who does or thinks they want to.
Came from EIS INC. This is the real stuff not from a...

I am looking to purchase a restored (high quality) 1911 Ford Model T Roadster for touring. (not a Torpedo)
Mike Reid, Sherwood Park, Alberta
(780) 910-3767 E-mail - mikejudsonreid@shaw.ca

For sale: crank $25 plus shipping

20240619_073707.jpg 20240619_073658.jpg

For sale: 2 wood wheels $150 each plus shipping
20241119_125544.jpg 20241119_125758.jpg 20241119_130014.jpg 20241119_130053.jpg

Morning! We are in process at this moment of doing bands on our 22. SAT AM- 23 NOV. The Low-Speed band is damaged. Anybody near us have one / set? TY in advance! Pls call or text: 360 317 6036.

As title states, looking for a set of 15-22 wood plans. I have no wood to copy from. Mostly needing cowl area and L and R sill dimensions.

I know, hard to find but figured I’d try!

Thank you!

Accessory for 1926-27, $25 including domestic shipping.

Pair of Budd brand front wire wheel hubs with hubcaps off an Overland, great candidates for conversion to Model T Ford by welding on to rear Model T wood wheel hubs, nice shape with good threads and not beat up faces, natural pair left and right. More pictures available, happy to answer questions. $375, domestic shipping $22.

Want to buy TWO Working Large Amp Meters for a 1925 and Earlier.

Please message me here. Eric Gator Gould in Alabama

High quality very authentic older restoration, correct body color, dark green that appears black until you get into the right lighting. Open valve engine one piece pan etc etc. Very nice throughout except for each fender where the mounting bracket is, has paint cracking and chipping. The car was restored in the late 1970s and within the first 3 or...

Looking for one 1911-12 Heinze coil with offset contact on bottom. Have a great coil box with three. My car is 4 cylinder equipped .Also looking for a Kingston coil box lid 1909-12

I have been working for years (decades actually) on my 26 speedster. I am using a heavily modified model A steering box as a substitute for one of the period available racing boxes. I made a new, longer, custom steering column, with custom controls and a new steering box mount. In the process, I changed the angle of the column which caused an...

Reduced price. For those of you that have wondered what the competition was like as Chevrolet began to outsell our first love......the Model T Ford, here's your chance to own one. For Sale is a 1926 Chevrolet Superior K 5 passenger touring. This is an older show quality restoration, extremely well maintained with less than 3000 miles driven since...

1920 Model T Ford Center Door Sedan for sale in Oakwood Ohio.

Was restored (body and drive train) in 1998 at D and D Classic Automobile Restoration in Covington, Ohio, and deemed First Place Junior at Hershey Car show in 1998.

Easy to start, and I drive it around the neighborhood and give rides to friends. Asking $20,000.

Posted for Steve by...

For sale: 1919 Model T Touring car. 1924 motor with electric start. Burgundy with black fenders, original 1919 upholstery in decent shape. Motor was rebuilt about 20 years ago. Runs and drives well, good brakes. Good 2-man top and good tires and tubes. Has upgraded distributor system for reliability. Clean open title. Located in Oswego, Illinois....

WTB 1914 Combination Oil Lamp and License Plate Bracket

An original cherrywood veneered Factory Ford dash that’s a great pattern to be absolutely correct or for an original car that needs an original firewall/dash. $100 plus postage

Looking for a perfect front wishbone for
Early car. Must be the thin styje with perfect threads and ball. Thank you.

I have one pair new axle housings from the final batch that we ran.
Silicon steel cast centres with original tubes and backing plates pressed in. Perfectly machined to factory specs. No more leaks around rivets no drooping or sagging ever.
No rivet housing $3000 or
6 and 12 rivet clamshell $2750 or
Workmanship guaranteed!

Only one set remaining.
Silicon steel casting of new differentials
Fully machined to factory specs
Original tubes pressed into new centres
No leaks at rivets as the rivets are cast into the centres No rivet differential have the rivets machined off. 6 rivet housings and 12 rivet available at $2750
No rivet housings $3000pr
Smooth backing...

One original pair front seat top iron pivots
For touring cars. $75 pr.

Unmolested rust free column 54inch tube complete with shaft gear case gear case top control rods
( no steering wheel or mount bracket)
$850 USD

]Original 1908-9 Roadster body with original mother-in-law seat. Included is older restored deck needing further attention
Body seats are fully upholstered in diamond tufted leather as original over horsehair sbd new coil springs Complete self standing top assembly on buggy rail with maroon wool headliner and correct attachments. 12,950
Also...

New Old Stock accessory timer brushes in original boxes to replace the roller on a Model T Ford. 2 for $23 including domestic postage.

For sale: new side curtain rods (2 pieces) $20 plus postage

For sale: distributor $200 plus shipping

20241115_125418.jpg 20241115_125429.jpg 20241115_125502.jpg 20241115_125510.jpg

I’m looking for a KR Wilson style magneto gap gauge

Original 17 inch Neville Fatman steering wheel. Beautiful original sliding fatman steering wheel. Perfect new mahogany wood rim. Fits standard Model T keyed steering shaft. When knob is pulled, the wheel slides up and out of the way. Nice and snug, no rattles. Tension can be adjusted to liking via threaded rod. Very hard to find wheel. Cast...

SOLD

This is an ingenious item. It looks partially manufactured and partially home made. It is a great “wall hanger” just as it is. It would require complete restoration to use (disassemble, clean, lubricate, and adjust to use). It was on an air compressor outfit that used 2 T motors connected front to rear. The front motor was power and the rear...

For Sale seat springs for a 26/27 coupe.

Solid bones for restore

$75 pickup only

couple seat.jpg couple seat 2.jpg

Hi all.
I'm looking for a deep oil sump for a full pressure speedster engine I'm building. None of the vendors seem to sell them anymore. The engine will have a Sherman Super Fire head on it so it would be kind of neat to find one of the matching Sherman sumps to go with it but that's not all that important. The oil pan is a 4 dip.

Hand air pump that is made of solid brass and plated, could be stripped to bare brass, complete but needs a new leather seal, original from the teens era, $225 including domestic shipping.

Rebuilt Fronty OHV with 428 valves
Machined , reseated and decked
New rocker train and New Frontenac rocker cover and side plate with the holy grail of Speedster carbs. The Zenith HP5A.
Carb has not been rebuilt but complete and unmolested. Will not separate. $4250
Images available ships from NY state
Eric Edwards 705 828 5405.

About 20 years ago i had 100 double twist horns for left drive ( North American use) car. They are suitable for medium to
Large cars as well as Model T Ford
$400 USD includes post sbd insurance to the lower 48 states and Cavada.
Eric Edwards 705 828 5405. Pics available

Nice pair original front top iron pivots
$50 post included. To lower 48 and Canada
Eric Edwards. 705 828 5405

Pair of very lightly used original burner tips $115 including domestic shipping, remember that these are no longer being made and are not available in catalogs.

Last set new housings recast centres in silicon steel perfectly machined pressed into original tubes and backing plates. Satisfaction guaranteed $2750 US. 705 828 5405.
Shipped from NY state

SOLD !!! Here is a nice, early, large brass Horn. It is marked #175 Auto Escargot on the bell. The inlet is threaded on the inside. It has dings but it can be used on an original/older restoration automobile or it would be an ideal horn for restoration. I don't see any cracks in the brass. A heavy, well-made horn that would be appropriate from a...

Free: Some rough FORD-O style steel lantern parts. This one is a little different as it has a non-Ford mounting bracket, possibly to update earlier cars or perhaps even farm wagons. The steel body is probably for the most part junk but maybe the bracket can be removed and used on another project (e.g. speedster, pie wagon, depot hack.) Pay for...

For sale are 5 brand new 21” drop center wheels in the raw with all hardware included. Never installed or painted.
$5k reply by email
IMG_5380.jpeg IMG_5381.jpeg

For sale early accessory Warford coupler. If a U-joint will slide on the input shaft of an early Warford transmission, you will need this coupler. Price $200. plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale early engine front cover and side cover (T1769). Converts generator engine block to non generator block. Great for speedster running side mount magneto with later engine block. Price $180 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale APCO oil level gauge and drain valve. Remove the lower oil pan drain valve and install gauge. The APCO oil gauge will show the oil level at a glance by the position of the white ball above the housing. Nice accessory, no more crawling under the car to check the oil. Price $125 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Engine head for sale. Taken off a running 1913 touring. After a little running turns out there was an old crack in the water jacket. Attempted JB Weld repair. Was not sufficient, repair needed. Asking $125 + shipping. Please email if interested.

For sale: rear spring $150 plus shipping

20220707_135539.jpg

For sale: good used u-joint $75 plus postage 20241029_175803.jpg 20241029_175747.jpg 20241029_175815.jpg

For sale: Ford script jack in good working condition $45 plus postage

20241021_180515.jpg 20241021_180810.jpg 20241021_180526.jpg

Looking for an APCO muffler.

I have a reproduction 26-27 coil box lid that I do not need. How about $10 plus shipping?

26-27 cover 2.jpg
26-27 cover 1.jpg

Just checking to see if anyone will be passing through Iowa on their way to the Pacific Northwest in the next 30 days or so. I have 4- 24”x24”x8” boxes that weigh 26 pounds each. I live just off I-80 so easy pickup. Buyer willing to kick in some money towards fuel. Please email me or private message. Thanks, Mike

Fits 1919-27. Not a perfect specimen, but very usable. Just the one pictured. 30.00 plus shipping. ctleonard64@gmail.com 17303982619396929482347332021900.jpg 17303983066691469996956146955168.jpg 1730398329238649868437097560018.jpg

I have an abundance of red oak to burn up, so I'm offering red oak running board blocks at half price compared to vendors. 1909-16 require 8 blocks for 15.00 plus shipping. 1917-25 are 4 blocks at 7.50 plus shipping. 1926-7 are 4 blocks at 7.50 plus shipping.. 1909-25 measure 7 3/8 x 1 1/2 x 3/4. 1926-7 are 9 1/8 x 1 1/2 x 3/4. I don't drill the...

Looking for 26 Roadster pickup.
Thanks for any help,
Bill

When was the change made between the early cast fork welded type to a later design that is still welded, but the fork is welded to the rod at the base?

Best offer by Sunday, plus shipping

Hello,
I'm looking for a set of wrist pins (two if possible) for a speedster engine I'm building. They need to be machined without the groove in the center for the pinch bolt as I'm going to be using a full floating pin setup. They also need to be the stock .740 O.D.

Thanks I'm advance

For sale: adjustable luggage rack $50 each plus shipping
20241027_132751.jpg 20241027_132529.jpg 20241027_132545.jpg

Nice original Winfield S,SR float bowl cover. No repairs, or cracks. Perfect threads. Spring loaded adjustment knob balls still clean and working. $80 includes shipping.

IMG_2171.jpeg

Pair of good used original burner tips $115 including domestic shipping, remember that these are no longer being made and are not available in catalogs.

5 NOS very early Champion X spark plugs with tatty boxes, believe these predate brass top plugs,

Set of 5 matching tire tube stem dust covers for metal stem tubes, original nickel plating that can be stripped to bare brass,

KW Road Smoother shock absorbers. The pictures show them on an axle. The Axle was bent so I removed them from the axle and will throw the axle away. $150.00. Plus shipping.

Ed aka #4

Dodge Brothers mfg. early Model T front axle. Heavily primed smooth finish front axle. Really nice. $150.00 Plus shipping.

Ed aka #4