MTFCA Forum

I am in the process of rebuilding the engine in my 26 coupe. What are your opinions on witch cam and timing gear set up, deliver the best all around performance for touring and cross country driving?

Eastern Idaho State Fair, Blackfoot, Idaho 1921
Model T front and center !

20210409_212024404_iOS.jpg when I was installing my classtique top on my touring I had the straps from langs for the front bow. Where they were so short and stiff it was difficult to tighten them evenly. It occured to me that a turnbuckle would woould be easier to adjust. I put on the turnbuckle from the hardware store and found it worked much...

Some old ads in one of my Ford supplier books from 1918-1919. Enjoy.

Hi all .... as it says, I’m looking for a Metz intake manifold that is interchangeable with the standard model T Ford manifold. Markosterman@icloud.com

Massachusetts To California Transport Now

Bolton, MA to Los Angeles, CA as shown

0E1D69DE-49B9-48F2-8381-87BAB50E872F.jpeg

17 feet enclosed trailer space - 6K capacity

Call or Text

FJ
260-804-6695

Just finished a new batch of Stevens Front Axle Inserts. Top insert and bottom inserts. Sorry but there is a price increase, not my doing stuff just goes up.
Upper inserts $3.75 each. Tapered
Bottom inserts $5.75 each Threaded

Email me at address in pictures. Thanks Dan
51CE4E71-A19E-4407-946D-4AD533FEE6A1.jpeg...

Trying to slide one in. Nice coupe with all glass.needs inner wells and small patch behind pass.door. 5000.00 in southern in. IMG_20210416_123313835_HDR.jpg IMG_20210416_123329774.jpg IMG_20210416_123313835_HDR.jpg IMG_20210416_123259749_HDR.jpg

Here is a nice pair of 14 windshield hinges. Have been taken apart, blasted, primed and assembled. Some pitting on back of one, see pictures. All parts are there except the split pins to lock nuts. Nobody is reproducing these that I know of. $85.00 + shipping. Email me at address in pictures. Thanks Dan
A45BD5C8-3F10-4B38-BE7B-4F09C022C845.jpeg...

Here is a nice pair of 14 windshield braces. Been blasted and primed. Not pitted, should make a nice set. $120.00 + shipping. Email me at address in pictures. Thanks Dan
0E8BBB97-39D3-4F35-9273-1C1CE35C0B53.jpeg
57A77D32-3F2C-4757-AF78-5F6C64321F4B.jpeg
83CBE93A-5531-4E83-903B-639254C6B98D.jpeg
0CB14FAF-D95B-4882-A7F0-903FB4D19F3B.jpeg

Wanted
26-27 Fordor rear side window holders as per pictures

Wanted
Still looking for all 6 of these both sides
It’s what the glass sits in. 4 in the doors and 2 in the rear side windows.

Wanted 1 26-27 Fordor garnish mould
The one that has the steps in it to hold up the glass. This is the rear side window. As per photos

Looking for a good Holly NH carb core for a 26/ 27.
Please call, text or email me.
Thanks in advance,
Randy
920-808-3381
Myersair@yahoo.com

I have the best ever! New old stock Big Macs with old fashioned dark blue wide stripes. Heavy duty material. Still in the wrappers These are great and haven't been available for many years. $50.00 each plus $10.00 shipping. I have 2 pair. One is size 34 X 30 the other is size 56 X 32.

Nice regulator with needle valve for flame size control and hose barb, fits any 6 diameter Prest-O-Lite tank. $135 domestic postage included.

I would like to purchase 4 gently used or new old stock rear axle bearings. I am not interested in the newer style replacement bearings without the grooves in them. Looking for some with less at a couple of thousands wear.

Thanks,

Found an index of different designs of unusual internal-combustion engines.
Most impressive of all is they did it all without any computers, just guys that had a clue.

Unusual Internal-Combustion Engines for Autos etc.....
An enormous variety of unconventional internal combustion engines have been invented, almost universally with total lack of...

Hey Y'all!
The Model T Museum's hours have updated! The museum is back open on Sundays from 10-4. Masks are no longer required but you can wear one if desired. Our staff will be wearing masks interacting with our visitors and members until further notice! Thank you guys and hope to see you all soon!

Looking for T snowmobile parts. What do you have.

I have 5 of these ready to go. Latest and best design IMHO. Also , cheapest yet at $135 ppd to your door. Includes T column mounting strap for painless install. Tmorsher@icloud.com to reach me, please no PMs, or messages here to call you. No can do. No will do. 9AB775F4-22B8-4895-AE44-6539E457F16F.jpeg

Nice gear with very minimal wear. $20, domestic postage included.

I've posted this on the early ford site without luck, so thought I'd try here also. I need a few parts to complete my 08 SR.
Hood former, gas cap, radiator cap, timer cover and front spring shackles. I will be stopping by Tulare so could pickup there.

thanks Jim

Model T 26-27 Standard Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

Model T 26-27 Pedestal Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

swap meet.png

This is my schedule for the next two weeks

I will be helping out at The Early Ford V-8 Foundation
Spring Swap Meet in Auburn, IN on April 23rd & 24th

Leaving Auburn, IN April 24th
13 feet available to Jonesboro, AR

Full to California from Jonesboro

May 29th

Available for transport from
Bakersfield, CA to Foresthill, CA

13 feet...

Hi all I'm new to this forum ,,i need help !!question ,,please can anyone tell me whether I can use a modern 12-volt coil in an atwater Kent type h distributor ?thanks for your time.

any one know what this tool is used for? Looks like a tool for cutting oil grooves in babbitt bearings, just my guess

per request , i am offering my dial indicator toolset unit separately from my linebore unit ... this is available for 1 or 1.250 diameter boring bars ( buyer must specify ) ... this is used to measure the offset of the boring bit and is NOT a roll over type toolset as used by Tobin-arp and others ... price for 1 toolset is $90.00 + $10.00 postage...

Free for the taking, see pictures. You pay shipping.

961hasslers#1.jpg

961hasslers#2.jpg

I have for sale a brass sediment bulb (THIS IS BULB #2). All is apart for your inspection, not froze up and clean inside. See pictures for details and condition. All for $65 and that includes shipping in the lower 48 states. Shipping other places will need to be recalculated. PM me or Email Me. MAKE SURE TO TELL ME WHICH BRASS BULB YOU WANT....

I have for sale a brass sediment bulb (THIS IS BULB #1). The handle is apart and the pet cock turns, not froze up and appears not too dirty inside. See pictures for details and condition. All for $65 and that includes shipping in the lower 48 states. Shipping other places will need to be recalculated. PM me or Email Me. MAKE SURE TO TELL ME WHICH...

Unusual all brass cable with steel reinforcing spiral sleeve and clip for leather strap! More pictures available, happy to answer any questions.

Odd lot of model T related accessory parts. $125 domestic postage $18.

I have added several videos to my for sale ad:

Looking for well used aux brakes, need to fit a late rear end. Preferably inexpensive compared to new ones.

Only one item left from this pile. It’s a sleeper, someone will be happy to get it. This is an original Bridgeport tire pump with a small ford script on the underside. The barrel is nickel plated brass. Some age cracks on the backside, but it will display well, and this one is rarely seen. An overnight dip in vinegar will make the nickel shine....

Will there be a tour and then a swap meet in Farmington this year?

A friend of mine owns a Diner (Johnny Angles) in Jacksonville, he contacted me and said he is hosting a cruise-in on the 16th of this month. I told him to save a spot for the model T. 2 days later he said he has gotten such an overwhelming response that he may not have enough parking. It has been a long time and every one is looking to renew old...

Surely someone has a reproduction or pattern to cast one!! Who has made these in the past?
Marked with arrow in picture. Not the circle!
Any help appreciated.

New rear frame bolt on lowering brackets. View the listing at,

Like the title say, grab bag of misc. Model T parts, one money gets them all. $60 and IT includes shipping in the CONUS. Thanks, stay safe, reply to jandulics@gmail.com

IMG_0186.jpeg
IMG_0187.jpeg
IMG_0188.jpeg
IMG_0189.jpeg

For sale locking steering wheel 16” dia.
New wood $275.00 + shipping Denver area
Call Ron 720-220-4744 C1B57BE2-5026-42FD-BA97-B27247E5704C.jpeg

I have a set of these and they are super-handy. I have no relation to the seller or the ad, just posting the link here in case somebody is interested.

UP FOR SALE IS THIS MODEL T FORD - OTHER MAKES BRASS ERA ORIGINAL RUNNING BOARD MOUNT SPARE TIRE CARRIER
30 1/2 WIDE
5 1/2 WIDE
EACH GROVE IS ABOUT 2 1/4 WIDE
HAS THE MOUNTING HOLE PLUS 2 DRAIN HOLES
LONG ROD TO HOLD IT TOGETHER
HAS ONE BRACKET TO GO AROUND TIRES THE OTHER CAN BE MADE EASY USING THE ONE FOR A PATTERN
VEY RARE PART DO NOT MISS...

The lamp is in cosmetically good shape and will need some elbow grease to polish it up. This was missing the front glass lens when it came to me so the silver plated reflector surface is grimy and tarnished. I found a lens for it and added it a while ago. This would look great restored and mounted on any Brass era car or later. It comes with a new...

Google “ Model T Transport “

I have personally transported close
to (400) Model T Vehicles 😉

Click Here For Model T Transport

May 29th

Available for Model T Transport
from Bakersfield, CA to Foresthill, CA

13 feet available

I have 30 feet of enclosed trailer space
available from Foresthill to The Tulare Swap

30 feet available to...

Nine original design Mag bulbs , all tested and working. Don't know if they are new or used but all the sockets are solid and they all work. Asking $95.00 for them all including shipping (Cont. USA or Canada).

OIL LIGHTS.jpg

1. E & J #9 Tail Light for 1915. $350

2. Jno Brown #110 or #115 Tail Lite for 1915 - 1918. $350

3. E & J #9 Tail lite for 1915. $275

4. E & J #8 Side Lite for 1915. $300.

5. E & J #8 Side Lite for !915. This unit does not have a side lite lens! $250

6. E & J #8 Side Lite for 1915. $300

THESE LITES ARE IN GOOD SHAPE FOR...

Well, the topic heading says it all. Does anyone have experience with this form of cleaning?
If so what was your outcomes like?
Are there problems or limitations cleaning say old brass carbs?

Any feed back appreciated.

563789CC-9F0A-449A-9292-373E1047CE7E.jpeg
Nice straight box with lock (no key) and closure tabs present. Hinges appear to be original and operate well. The lid closes to a nice fit. The box includes a loose false sheet metal bottom. The box bottom has holes, presumably for mounting and, possibly, drainage. There is evidence of old rust around...

With the new owners permission, here are original pics of his car. Glad to get the ornament back to an original auto ! Thanks Original Smith ! E6BA4C68-D823-4C89-AB3F-7E99AC1B24CB.jpeg C923667B-4BE4-48FC-849B-21D239B1269F.jpeg C66212B7-87BE-4913-B45E-E02FC1AA820E.jpeg

Hey y'all!
The Model T Museum's April Hours are Tuesday-Saturday 10AM-4PM. Starting April 11th, the Museum will be reopening on Sundays 10AM-4PM. No need to call for an appointment unless you have a group of 10 or more! Masks are still required! Come visit the Model T Museum and Historic Richmond Depot District today!

Nice brass control for steering column and air bleed valve for the intake manifold, complete setup $150, domestic postage $12. NOS New Old Stock!

Model T friendly and knowledgeable. Extensive rivet catalog. Excellent service, great prices. Speak to Jim

(SOLD!) Sedan for Sale. Older restoration with Sure-Stop brakes and Ruckstell Rear Axle. Original interior with about 4500 miles on rebuilt motor and trans. Newer tires and tubes, everything works. Good paint and drives well- stops on a dime.

Car has been sold. Thanks!

We have a F350 Ford Dually with a slide in camper. Behind the the truck, I tow our enclosed Model T trailer. My wife had a lot or trouble climbing into the camper, when the T trailer was on the truck, using a plastic stepping stool. I got out the welder, and using steel box tubing, some hinges, and expanded metal, I made two steps. Both are...

Looking for a halfway decent carbide generator for an '11. Prefer one that actually is operable,
but may settle for just a decorative object. Really not planning on night driving anyway!
PM me, or phone/text 419-271-5405. Thanks.

Pair of Front Fenders off my TT. These are in great shape in need of minor repairs and sanding.
300.00 plus frt.

Email at Korusj316@gmail.com for pics.
Thanks

Two TT rear wheels with hubs and rims 600-20
Rims and lock rings are good and tight. Wood is weathered currently on running and driving Truck. 600.00 plus freight.
No tires on this set. I will be removing them in couple days.

# Also 1 extra 600-20 rim and lock ring good and tight. 125.00 plus freight.
2-600-20 tires that have great thread...

This period dealer dash plaque is in Mint as new condition. Asking $35 with free first class mail shipping in the lower 48.
DASH BADGE.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

This neat period accessory allows you to pull for choke as well as adjust your carburetor mixture. It's in good used condition. Asking $75 plus postage.

choke pull 1.jpg choke pull knob.jpg

Please use this email address below and NOT the personal messaging system to contact me.

email.jpg

Posting for a friend in Irvine, KY, about 45 minutes SE of Lexington, KY.

He has two sets of fenders, seat frames, fuel tank, radiator and some other misc items for $500.

Pls give John a call at 8 five 9 - 302 - 4057 if interested.

Model T 26-27 Touring & Enclosed Four Door Cars Rear Fender For Sale. (Not For Coupe).
$450 Each Fender Or Best Reasonable Offer.

This is a brand new bracket I purchased from one of the vendors years ago for a speedster project that I never got around to. These sell for $100 plus shipping at the vendors these days. I am asking $85 plus postage. neverout tail lamp license plate bracket 1.jpg neverout tail lamp license plate bracket 2.jpg

Please reply to my email address...

Here's a cute little spotlight that mounts to the arm of your side view mirror. You can either pop rivet it or bolt it to your mirror. It appears to be nickel plated under the scuffed black paint. it's in overall good cosmetic condition, an would make an interesting addition to your T. this is the only one of these I have seen in all my years of...

The lamp is in cosmetically good shape and will need some elbow grease to polish it up. This was missing the front glass lens when it came to me so the silver plated reflector surface is grimy and tarnished. I found a lens for it and added it a while ago. This would look great restored and mounted on any Brass era car or later. It comes with a new...

This is a complete setup designed to fit a Model T by a leading supplier of accessory products for the Model T. It's in good working order and replaces the stock muffler. Read the Ad I have included for more information on this unit. Asking $175 plus medium flat rate postage.
apco cutout 1.jpg apco cutout 2.jpg apco cutout 3.jpg apco muffler...

Beautiful car listed for a friend.
$18,000 firm
Phone contact only.
Thanks

Very nice pair of front wire wheel hubs, excellent bearing races, missing one wheel stud, one stud tacked in place. $300 shipped to your door in the lower 48. Tim 402-680-8565 IMG_1481.JPG IMG_1480.JPG

1915 Roadster P U
Turtle deck included, new firestone tires
Metal fellow wheels,30x3 & 30x3 1/2
Brass spun wheel covers
New brass works radiator
Special hand made head lights
Twin brass twist horns
Rebuilt engine & transmission
Out side Oiler, water pump & wolf whistle
Ruckstell axle-high speed ring gear & pinion
Rocky Mountain breaks
Hassler...

I'm searching for the driver's and front passenger's seats for our 1927 Tudor.

I believe that the back seat is simply springs with a bit of upholstery while the fronts have structural components that are missing on this T.

Many thanks,

Joe

Readily restored as these are the more complex parts, the rest can be made with hand tools. You could start your car from the front seat! Binnon was one of several brands for the Model T.

Pair of mounting brackets for all 6 diameter Prest-O-Lite tanks.

I have a spare Walden Worcester 3822 flywheel cap screw socket wrench for sale for $15, which includes priority mail shipping within the US.

From what I have read, this is a better tool for removing the cap screws than the Ford 5Z-210 open end offset wrench made for that purpose.

Please email me at the address below if you would like to buy it...

1925 T runs OK but want some improvement.Would like to find a good used or rebuilt short block, and limit my work to valve job if needed and new rings.

This trip is done ✅

April 2nd

30 feet enclosed trailer space available

7000 pound capacity - 8 foot rear door

Leaving Auburn, Indiana

Heading To Charlotte, North Carolina

FULL from North Carolina both trips

Call Or Text

Jim
260-804-6695

Map Of Route

5FAA53DC-C0CC-4496-A092-5D3CF2A7B1EC.jpeg

Hi folks. I have tooling for rebuilding front axles and steering assemblies. I check to see if axle is bent, put new bushings in front axle, new bushings in spindles, spindle arm bushings, I can do spring bushings too. Need new wheel bearings? How about a repair on your hub cap threads?

My shop is about 30 minutes north of Detroit, Michigan (via...

What I have is a original rear box for what believe fits a late teens-mid 20's Model T roadster. They are only original once. The size is 30 inches high 32 inches wide and 40 inches long. I'm asking $2500 and shipping is possible for extra or free delivery to Hershey. Please look at the pictures ask if you want more pictures. Call 815 535 1367. Or...

WTB an original 26/27 push type starter switch. Must be in good serviceable condition.
Please call, text or email me.

Myersair@yahoo.com
920-808-3381

:mrgreen: Tail lamp bracket used on roadsters and coupes for mounting the kerosene light. 3 available. Cast iron as originals. $30 each plus shipping $9. PayPal between friends preferred. Jputnam (at) wcoil com. 419.3 zero six.39 six six.[ DSCN3486 (640x480).jpg

I didn't want to tag along with Tom's road pictures, so a separate post.
postcard 6.jpg
Bridge across the Baraboo River just east of Wonewoc, Wisconsin. Taken by my grandfather, Ben Ostergren Sr. and his brother Herb. Sept 13,1916. The caption in their photo album read: Not built for heavy traffic but it got us across .
DSC02587.JPG
The...

mirror glass. Not chipped, mirror silver not perfect, $85 includes shipping. No PM I miss seeing them. Jputnam(at)wcoil com
20210321_170432.jpg

20210321_170548.jpg

E&J lamp rims, no hinges or latch. No cracks in the rims. One dent to be repaired. $125 for both shipped USPS to you. PayPal between friends preferred. Jputnam (at) wcoil com. 419.3 zero six.39 six six. 20210321_170648.jpg

“ It Takes A Village “ .... 👍

When you visit The MTFCA Museum in
Richmond, Indiana - if you see a tool
or piece of equipment or artifact ...

Or if you go into
The Bruce McCalley Memorial Library & Research Center

Think about what it took to get it there 🤔

Author Dean Nelson @

Donated important research information gathered
by the late...

New old stock hood shelves for 1919 to 1923 Ford Model T, never been used, $50 plus shipping.

Two to choose from , all brass, neat little filter to add on your carb. A little extra insurance If you are still using an original tank. $30 each or $50 for the pair, ppd to your door. Reach me VIA email only, tmorsher@icloud.com Thanks! 2EA9166A-F330-4C18-8E1A-E39E9A7B77C8.jpeg 152786E7-F6E4-4D3D-B83D-679B03FDB606.jpeg

Here is a nifty primer attachment for about any old car with a carb. Very well made. All brass construction, measurements shown. $75 ppd to your door. Tmorsher@icloud.com to reach me. Thanks! D66DDC1E-FD40-46B9-8539-EE722F32EA6B.jpeg 58F98F60-2878-48D9-B81B-9962BC025242.jpeg

I'm looking for a buggy rail, not a robe rail, for my 1910 touring. Original or reproduction but must be in good useable condition.

I hadn't seen one of these for a Model T before.
Oldberg.jpg

I have no connection to the vendor. Thought it might be interesting.
Rich

I just watched a video on fitting top bows on horse buggies on the Engels Coach Shop YouTube channel. It gives great insight into the techniques used to adjust wooden top bows to fit bow sockets and how to position bows one to another. It also shows how to adjust the curvature of an improperly curved bow with heat from a torch. Something of a...

Solid pair of wind wing brackets.
Got a broken or missing one ? Here you have the solution.
$100 including shipping USA
Please contact via email through contact information

2 the ink is not visible.
$55 including shipping USA
Please contact via email through contact information.

Make 2 horns less the covers out of this bundle.
One cone is a little dented, the other is mostly straight. 2 good mounting brackets and 2 solenoids.
$120 including shipping USA.
Please contact via email through contact information

No slop just lightly used.

Model T Front & Rear Springs.
8 leaves rear spring & front springs 7 and 8 leaf configuration.
$80 Each or Best Offer Each

This is a nice set of mint accessory cast iron and brass spring loaded brake rod supports. Asking $70 plus postage.
brake anti rattle 1.jpg brake anti rattle 2.jpg
Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

I’ve been looking for one of these signs for a long time. Let me know if you would like to sell or if you have any other signs or displays that are similar. I saved this picture from an old thread.
Thanks!
Nick Rein
PSUNicholas@yahoo.com

41325FCD-64E8-4AC7-A4A3-065CC0573E12.jpeg