MTFCA Forum

I was able to procure 8 brand new 30x3.0 clincher rims. 2 are already spoken for. As far as I know this is the last of these that I could find. They are from the same batch that I supplied to Lang’s 2 years ago. Price is $195 each plus actual shipping, boxed 2 per box. There are just 6 left and when they are gone I will not have any more...

Auto camper a.jpg

This Stromberg LF Carb #977029 Looks nice and is complete with the fuel connection globe. All screw slots and fittings look good and unmolested. The acorn nut for the float adjustment is missing but available. These LF's were a good improvement for anyone not wanting to pay the very high prices for the OF on a Model T. $150. or Best Offer...

I have a Stewart model 26 on my 1912 van. This is my reserve one. I figure since I have never fitted the internal cable on my van since I built it in 1995, its not ever likely to wear out, so someone might put this one to use.
It has a scratch on the glass at 5 mph. Apart from that it is undamaged. It has had very little use, as there is no wear...

Looking for a 1926 or 1927 Model T Roadster Pickup Bed. Would like one in good condition.

Looking for a tall radiator shell prefer a nice nickle one but will take anything that is in good shape.

Ford drain plug wrench
Thanks

I need BADLY A 1911 Torpedo Repop Gas tank or a good useable ORIGINAL TORPEDO GAS TANK to finish my New York to Seattle race car #1 Call or e-mail me soon ,, Thanks, Dennis in Connecticut. 401-932-3191

WTB a 1914 Alum Hood in good condition. Jim

Spotted this T speedster parked in front of the Kimberly Hotel on W. 50th St. in Manhattan. We stayed in this block several times over the past few months, and the car (and lamps) never seemed to be bothered. Every night, they put a cover over it.

Phil

IMG_0911.jpg

For Sale 3 NOS Back Window escutcheons. Not sure of application. $40 for all 3 plus shipping. Steve 701 212 5009

Trailer parking for Saturday is at the Rumpke Recycle plant
At 275 Fort Wayne Ave, Richmond.
However, there’s so much road work your GPS May not get you there without lots of frustration.
Attached photo is of directions from the museum to the lot for Saturday. If it attaches…….

We’ve got some of the Alphabet (pre-Ts) here and more on the way....

Looking for two sets of 1926 or 1927 front fenders. Preferably something in rough condition. I can deal with splits, dents, torn bolt holes and rust.
Prefer close to Dallas, Texas, but willing to ship if the price is right.

Looking for a useable stock round gas tank and brackets, can pick up in SoCal or AZ. Thanks!

… or ‘sheath’. Who doesn’t need one ? Solid. Possibly original paint. No spark/gas rods. No steering column shaft or 5:1 gears. Only solid sheet metal. Not being repopped but all other components are. Need more pics ? Only $55 + the ride… gwhouse73(one)(at)gmail.com

For those of you coming to Homecoming, the bridge just north of the museum is out. St Rt 27 heading north into Richmond is under construction and is down to one narrow lane. The detour to get to the museum from the north coming in on St Rt 27 is on narrow streets. I would advise you to come to the museum from the east or west on St Rt 40, turn...

20220808_210338.jpg 20220808_210300.jpg

For sale: Aladdin Wick cleaner $10 plus postage

flame spreader $15 plus postage

USED rear car axle spiral wound roller bearings part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002 wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few Ford, all are the original style spiral wound...

Good condition on a rolling chassis; excellent top; steering column; windshield; fenders; aprons and hood. Missing only 1 door. $1,450. (716)640-8591. Photos available.

We are fortunate in Kansas to have the Flatlands Model T club, which is a healthy club that always has good events and work days. According to the internet , the first organized Model T polo event was held in Wichita, Kansas in 1912. Our club has an original T polo car, and a second car built up by a member in the last few years. The club decided...

I have two pulleys available. Only one image will upload of the smaller pulley. The one pictured needs the pulley to be realigned on the output shaft. I’m happy to email or text more pictures.

Make me an offer on one or both.

Here is a rare 1913 Illinois License plate to put on your model T or in your collection.

$175 plus shipping

Please pm if interested

I have the casting patterns for the valve covers for this head. I no longer need them!!

Does anyone know where I can obtain a 3/8 x 1/4 brush for a Model T TW brand timer?
Thank you Steve Rex buick1914@hotmail.com

for sale: 13-20 round gas tank brackets. in good condition $25 plus postage.
text 314-575-7115 for pictures

New unused repro switch and key for 1911-13 Heinze coil box. Good quality - very nicely made. Nice positive action in mag - off - bat lever. Black paint on insert behind key needs touching up, otherwise its in excellent condition. $225 includes air mail postage from Australia to the USA. Paypal payment preferred. If you'd like more photos or info,...

Several 1923-1925 Sedan rear fenders, believed to be NOS, shop worn but very nice. Holes are round, no evidence of installation. $350/pair, can deliver to Manhattan KS MTFCA Tour.

Sent you emails about your keys. Call me at 801-389six nine 66.
Ron

Make me an offer. Several windshield frames plus one headlamp cross bar.

For Sale Early hand crank and ratchet. Hand crank is marked DB T 519 and has a replacement handle. Ratchet is marked T 528 and has the bosses around the pin hole. Price $250 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt -SOLD

What Pertronics model fits in the Atwater-Kent LA? I called Pertronics and they had no Idea, but agreed one can be put in the LA. Any instructions on installation?

Winfield carburetor linkage swivels, very limited number of New Old Stock swivels available at $80 pair including domestic postage.

For sale: 09-25 driven plate and 25-27 plate. good condition, some light surface rust
09-25 $175 25-27 $210 includes postage
they have Ford script and part number

text 314-575-7115 for pictures

Set of Schrader brass era tire tube stem covers with proper solid not stamped rim nuts for brass era Model T Fords, $95 set including domestic postage. Original nickel plating over solid brass that you can strip to bare brass if you prefer!

Complete set of original Schrader tire tube stem covers with nuts, $55 including domestic postage.

I posted about this cutout in the general discussion forum here:

It may not be a factory cutout, but it was mentioned in that discussion as looking very similar to the cutout shown in Bruce McCalley's book on a 1919 car. So you decide. Regardless, it is an early, period correct cutout. I have serviced it to include the following:

-Cover...

Wire wheel center for 54 spoke pin drive wheel $175
Hubcap wrench $165
Both very good original parts. Shipping at USPS cost.

This is a very nice 1926-7 sun visor in great condition 125.00 plus postage or pick up at the shop in Loves Park,Il, Bob
815-633-7244
modelt2001@comcast.net
no p.m's please

New never mounted brass side mirrors for open cars/ trucks
sold

Im looking for the rear over the frame u clamps that hold the rear spring in place. I need the longer ones that will bolt and hold the spare tire bracket on my 1926 touring. Thank you Jerry Berger at jlbljb@aol.com

Model T Spotlight with Retractable Cord $200 PLUS Shipping.

Just seeing if anyone has a usable top boot for a 26 touring. I am also looking for a used but usable set of curtains for the same car.
Thanks and God Bless,

Joshua A Powers

1906 Model N Coil Box. Original box and coils that have been restored. Some shelf wear damage to wood on the box. A couple of small dings in the finish. Original switch, coils and latches and brackets that have been restored. $1200 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA Forum....

SOLD
this for a friend, never been mounted
30 x 3 Universal straight rib tire with wide white wall no cracks always been stored in warm garage. should clean up good
175.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net
no p m's please

Hinge top dog bone cap. Internal threads, one top cap hinge ear broken (see photo) $75 includes US shipping.

Rex Machine Co. locking steering steering box cover, missing key and lock internal parts. $45 includes US shipping.

Nice Ford-O tail light $115 includes US shipping.

Excellent Teeth. I have a set on my ‘14 runabout. No additional noice. Only $90 + the ride. Personal check OK
Thank you Joseph K and MTFCA !!

There's a dangerous link in a spam reply on the topic snow in south of france , it's the last reply

OK. I have my windshield assembly, support rods, and found some new springs. Now I need glass. What do i need for this: channel material, glass clamps, rubber or felt for wind and rain protection? And does anybody know of a source of the actual glass in or around Seattle? Bill Conner

Early front motor mount with cap, very light rust no pits. $35 includes domestic postage.

Pair of accessory gas headlamp ignitors, burner shown for clarity, not included. domestic postage included.

Good for rebuilding. $30.00 plus shipping.
Tom Butterworth
772-475-9142

In nice straight condition. Asking $40 plus postage.
California 1923 plate 1.jpg California 1923 plate 2.jpg

Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Model T Times Magazines
For Sale: A lot of Model T Times magazines from the Model T Ford Club International. All magazines are in Good-Excellent Condition from non-smokers home. A good number of them have the yellow protective cover.
It’s just fascinating to see this snapshot in time of how the hobby has progressed.
These are priced to sell,...

I am looking for a pair of late 1924-25 Roadster floor board supports/runners. I am missing the passenger side on the car I’m building, would like to find a single passenger side but would buy a pair. Earlier style will not work since the bracket they bolt to are wood and my supports for the firewall are made from steel. I’m also looking for the...

Need some help,

I broke the driver side window in my 1921 Center Door Sedan. Does anyone have any experience with replacing this window glass?

Bill Severn

One pair of 30 x3 Non demountable McLaren wire wheels for sale. Complete with acorn nuts studs and hub caps . New never used. powder coated straw. 1500.00 the pair plus shipping.
Mark Eyre meyre14t@yahoo.com

I heard that you could rent an enclosed
car hauler trailer out of Michigan …

Yesterday I saw this in Oklahoma 
headed eastbound on I-40 …

I called the number this morning.
They only have one - it rents for
$100 a day - you can take it out
of state (Michigan) - but not out
of the Country - if you rent for
a week they knock off a day …

FJ...

Decent Black and brass headlamp. Decent brass. Mirror has a chipped edge. Missing burner but has stand. Took it in as partial payment for rebuilding a rearend. 225.00 plus shipping.
Mark Eyre meyre14t@yahoo.com

WTB. Support Rods for a Metzger Automatic Windshield. Bill @ 360=544=2160

Pair of left and right used perch's. One with a bushing and one without. Asking $75 for the set plus postage SOLD!
Earl perch set 2.jpg Earl perch set 1.jpg

Pair of left and right used perch's. One with a bushing and one without. Asking $75 for the set plus postage.
email.jpg

Metal is nice and straight and in good condition. Asking $45 plus postage.SOLD!
1924 California Commercial License Plate 1.jpg 1924 California Commercial License Plate 2.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Looking for a usable set of original front floorboards for a 1922 Touring: anything from 1917-1922. Bill 586-651-5760

I'm looking forward to having a sellers space this year at the Auburn meet especially since being rained out last year along with this years scrubbed Tulare meet. It will be great to see you all there. I'll be bringing a original hand crank coil tester along with lots of other treasures. SEE YOU THERE!
Auburn Swap meet.jpg

This original horn marked STANDARD is in very nice condition for it's age. The horn bell measures five and a half inches by four and a quarter inches.It comes with a four foot long brass horn tube and will need a reed for the reed chamber available from the vendors along with a rubber horn bulb. Asking $275 plus postage.
Standard horn 1.jpg...

This bracket and tail lamp allows you to easily switch between a brass era kerosene lamp and a electric lamp.The brass Neverout light is missing the clear glass insert. The bracket fits a stand size taillight electric socket so a different tail light could also be used with this hard to find bracket. Asking $75 plus postage. SPOKEN FOR!
neverout...

I'll be at the Auburn Swap meet and will bring a dozen rebuilt starters & Generators I just finished.

SAVE $100 on shipping and core charges!!!!

Jeff

row of starters.jpeg
.
starter housings.jpeg

My entire rebuild process is described in gory detail on my new website:

Forum Member Pricing:
1919-1927 Ford Model T...

Thank you to Mr Jesteadt at Luray who bought back the side curtains he sold me last year. It’s people like this that make the old car hobby great.

Although I am coming to Luray this year, I don't have enough parts to sell to justify buying a space, and I was wondering if a vendor at luray would be willing to sell me a small portion of their space so I can put a four foot table in it? Should have posted this alot earlier, just plumb forgot with all the preparations for the trip.

Wanted: '26/'27 taillight / tag bracket (do not need fender mounting bracket). Also, Victoria accessory stop/tail light (complete) which snaps in in place of standard taillight. See pictures.

Looking for a used sleeve puller for a 27 car axle. I know I can buy one new but thought I'd see if someone had a spare to part with for less.

Celebrating Henry Ford’s 160th Birthday. Friday evening enjoy cake, pie and ice cream at the museum from 6 – 8 PM. Come out and meet old & new Model T friends.

Celebrating the Model T’s 115 years and still going strong.

The Rich Eagle painting tickets will be available – stop by and see me by the MTFCA Museum Parts Table. The painting is donated...

Loaded up Wednesday in Albuquerque, New Mexico …

1925 Model T Telephone Service Truck

IMG_5651.jpeg

FJ

Too many projects, something has to go!
This project has many correct original 1909 / 1910 parts.
It has many reproduction parts.
The engine block is a 1915 that has been carefully modified to the open valve configuration.
It is not a complete car.
Some restoration work has been done.
If interested, contact me for more info.
I have a list of all...

Older reproduction 1915 brass horn tube, nice condition, no damage will polish up beautiful 80.00 includes shipping lower 48 3464E804-48E6-4F74-9942-D924858681C0.jpeg

Hey guys, don't forget the Model T Homecoming is all set to return to Richmond’s Historic Depot District on Saturday, June 3, starting at 8 a.m. at the Model T Museum.

As always, the event is free and open to the public.

Join your fellow historic car enthusiasts for this annual celebration of the Ford Model T!

See historic cars from before the...

Looking for the locking bracket for a carbide generator like the one pictured below. Please PM through the Forum with any leads.

Thank you for your time.

Kind regards,
Michael Hanson

Here's a set of barn fresh small oil cans from my display shelf. Asking $39 plus postage.
8 Mini Oil Cans.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

This is a good used FORGED Ford factory steering arm unlike the CAST reproductions arms offered by the vendors. You can see from the photos that it's got a full round ball. Asking $45 plus postage.SOLD!
Steering Arm 1.jpg Steering Arm 2.jpg Steering Arm 3.jpg

Please use this email address below and NOT the personal messaging system to contact...

This will look period correct on your Model T or speedster for actuating a number of different accessory items. Asking $40 plus postage.Sold to Rich.
Dash pull Cable 1.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Early front motor mount with cap, just dirty with very light rust. includes domestic postage.

Whistle measures 18 inches long by 3 x 3 inches. Asking $75 plus postage.
aeromore 1.jpg aeromore 2.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

This is an excellent cast brass radiator badge that is 3D rather then the repro stamped 2D brass sheet badge. Asking $55 plus postage. SOLD!
Ford Script Radiator Badge.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

I have a pair of friction shocks, purchased from Speedway Motors. I tried to mount them on my Model T
But failed to find a proper location for them. ( I’m not a welder) .
I’m asking $80 OBO plus shipping.

FOR SALE 2021 RockSolid White 6’ X 12’ Box with Rear Door Ramp and Side Door, with a spare wheel and tire. Ideal for a golf cart, small antique tractor or vehicle, or two motor cycles. Towed about 600 miles since new. Made in Georgia. Will be at Luray. Jim Golden, $4,500.00

Looking for right side RB…..rusted through from having a battery sitting on it since 54…
If someone has a pair and they don’t want to split them up, I’ll take them both, thanks in advance
Ed 585-808-3311

WTB Looking for fan fan pulley with ball bearings inserts made by fun producets that replaces brass bushing still listed by parts venders for 47.00 but back orderd Rich Huggins 520-827-0295

Hello Everyone,

I have a early 1920's Roadster and need the metal panel that covers the gas tank (under the bottom seat springs). I'd like to find an original. Some patina is OK.

I'll be vending at Luray next week if you are coming that way.

Thanks,
Howard Tomlinson

Good evening Model T friends. I am in Meridian Idaho looking for Nickel Headlight rings for my 1926 Model T Tudor.

Does anyone need a nice TT frame? OR any other TT parts. Let me know ASAP>

For sale late 1918 to 1927 Cowl lights and Tail Light set. Very good shape, complete with burners. One is Thomas J Corcoran Lamp Company, one is Corcoran Victor both have Ford script the third light you can't read the script. Will be taking to Luray swap meet in Virginia. Email if interested. Asking $500 for the set.

Just a heads up. Don Lang is going to the Luray, VA swap meet and can bring anything down if they want. We need to have the order in by this Wednesday (May 3rd). Pick up at Luray May 11th-12th. Just give Lang's Old Car Parts a call and we can put an order together for you.

Effingham Regrinding

150.00 ish
Ask for Dean….
Stock grind only

Camcraft Performance Cams

175-225 ish
Ask for Hunter
250-270 grinds

Pics to follow…..I hope!…lol

This Year’s Schedule

IMG_5484.jpeg

FJ

Looking for a radiator ornament similar to one pictured here.

Please send me an email
Travellak1@gmail.com

Cleaning out extra stuff haven't used
19- 25 comm harness NEW
22-25 coil box bottom orginal good shape
Coil box woo wood 15-25
Timer clip new
Coil box contacts
Good New Day timer and brush
How $115 shipped to you lower 48
Jalopyt@yahoo.com
Nv bob

Brass monocle windshield frame. Fine shape, no cracks. Glass was replaced with plexiglass that is clear, no scratches or cracks. $250 plus shipping from Coupeville, WA. Bill @ 360-544-2160

Anybody still have one around? Seem to be few around back on 2013 forum.
Top dollar paid for reasonable good condition.
Okay if missing lock or hinges.

Leave msg (619) four four 7 - 0 eight 7 eight or PM
Thanks
Ed

SOLD! I lost my storage and need to sell my '26 Touring car. Clear title, runs and is complete. The car is an older resto and would be a fun car for someone to do some cosmetics work on. I crank started it once it because the bendix is bad, I think. Has wind-wings and nice motometer too. Maybe it was a Sport Touring? Sold.