MTFCA Forum

This is a brand new in the original box unit ready to mount on your car. It has a built in flip top oiler for easy periodic oiling. Asking $50 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! Tiger Timer 1.jpg Tiger Timer 2.jpg Tiger Timer box 1.jpg Tiger Timer box 2.jpg

New never used in the original box.One box flap is loose. Asking $45 plus postage.PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! eagle timer 1.jpg eagle timer 2.jpg eagle timer 3.jpg eagle timer 4.jpg eagle timer 5.jpg

Steering column firewall and dash support bracket set (26/27) in very good condition. Price for the set is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250428_092029.jpg

Hi all,

I'm working on disassembling my 3-speed aluminum Warford to clean it up and to change one of the gears out. The transmission was found in disuse, but inside was well lubricated and in generally good condition. The teeth on one gear were munched pretty bad, but other than that all looks well. The input side nut is being a little difficult...

For Sale is a Reproduction Aermore Exhaust Whistle that had been used. Comes with a New Kick Pedal and cable. It has been Glass Beaded and is in good condition. Will need to be painted. $225 plus shipping. Lang’s 1-800-872-7871

For sale Tucker spoke jack with five shims. Tool measures 8-3/4 inch fully extended and 5-1/2 inch retracted. Good threads. PAT. 5-10-24. Price $80 plus shipping. Email, text or call (248) 894-75fiveone. Thanks, Walt

For sale Marquette Tire Tool for Clincher Tires. Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

This is a collection of four Magnetos For Sale on Magneto Monday. Look at the pictures closely. $200.00 each plus shipping but for Magneto Monday the first magneto to be purchased will sell for $100.00 plus shipping. Come get these while they last

Thank you for your interest.

R/S,
Jonathan Bodine
406 498 3946

I was breaking down an early transmission/flywheel assembly and got a little surprise.
One of the magnets came off in two pieces!
It looks like it's an original assembly as indicated by what appears to be the original lock wire.
There was no indication the magnet was broken.

Yup - They're out there.
 
Magnet.JPG

Are you bringing any of this type tire to the Homecoming, Richmond, IN?

If so, let me know so I can plan to come.

Thank you.

Bill Everett

Model T Whitewall Tire 30X3.jpeg

Model T Whitewall Tire 30X3.jpeg

Are you bringing any of this type tire to Luray? I need two (2) 30 x 3.

If you have a couple of them, or even one, please let me know so I can plan to come.

Thank you.

Bill Everett

I was down in one of my buildings getting stuff for Luray and saw a 1912 complete transmission I have been keeping.
It is dated June 1912. (See picture).
Everything visible is marked DB. Even the dated main shaft if I remember correctly, it is on bottom and I don’t want to move it.
If anyone is interested I can bring it to Luray, but will not...

Anyone interested in a nice little lamp? Selling for my friend. $25 plus the ride. Prefer PayPal but will take a check. Email me from my profile please. Thanks.

Selling for a friend. Here's a real nice tight U Joint for sale. $75 plus the ride. Prefer PayPal but if you wanna risk losing a check in the mail that's fine too. Email me from my profile please. Thanks.

Unrestored pair of Victor Model 2 side lights with brackets. The glass is good with no cracks or chips. The light for the right side has a shallow dent in the metal panel. Price is $175 plus shipping. Please send me an email.
20250425_205315.jpg
20250425_205407.jpg
20250425_205504.jpg

I’m looking to put together a reliable engine together with an oil pressure system, drilled “C” crank, and a Roof 8 “Liberty” head. It’s my understanding that the various OHV engines had issues with sufficient cooling for the rear (#4) cylinder. This was known, even back in the day, so Frontenac included a water manifold with their converted T...

Nice pair of TT rear axle spring perches. Not much wear. Media blasted and ready for paint.

$20 plus shipping in the U.S.

IMG_6621.jpeg

IMG_6622.jpeg

IMG_6623.jpeg

IMG_6624.jpeg

Nothing ever fits the first time. Fitting the floorboards and back seat area.

Battery access lid. The lid is 12 1/2 inches wide. The area it needs to fit is 12 1/4 inches wide.

When I got the body in pieces from a friend of mine, there was no battery access lid. I found one in his shop that was the same patina at the wood in the body but he...

Selling for my friend..nice oil lamp door.
Repo's run about $100. Blue light special here for $65 plus the ride! Great replacement when yours falls off and busts or have a spare! Prefer PayPal but if you wanna chance a mail check it's up to you! Email me thru my profile please. Thanks

I have these parts I'm willing to bring to the Luray swap meet if you are interested.

New set of 26 27 Floorboards
Painted black 26 27 front and rear fenders and splash aprons
5 powder coated 27 wire rims

4 Hayes wire rims in primer with hub caps
5 Buffalo wire wheels with spare tire carrier and hubs painted red

Very nice green 1915 turtle...

WTB: older used script floor at for my old restoration 1915 roadster.
Tattered, ripped, worn ok. Just don't want to buy a new one would not look right in my 1957 worn restoration of a '15 roadster.

frontyboy

(brasscarguy@comcast.net)

This is a set of cast iron stops that mount to a T front axle. I’m guessing the idea was to keep the spindles from going over center.

There looks to be a manufacturer name cast in them but I can’t make it out.

I’ve never seen another set like this before. Would make a really great addition to any Model T accessory collection.

$100 plus...

I have a nice early 1915 steering column for sale. I do not have any clue as to its value. What would be a fair price for both the buyer and me?

I am trying to find out any information on Curt Austin (I believe out of Roscoe, IL) and his vehicle restorations. His name keeps coming up (in passing) in connection with some high-end restorations, but nothing more than it was restored by Curt Austin. If anyone has any information that they might be able to offer I would be greatly appreciative.

About 25% of early Ford sales information survived in the Accounts Receivable ledger books at The Henry Ford, Benson Library. Trent Boggess tirelessly entered the data by hand (thousands of records) into a database included with Carl Pate’s (RIP) Early Ford book.

However, reviewing the actual ledger pages and entries provide additional...

We have room for another project here now. Can take in one whole car restoration or 1-2 engine only rebuilds. No wait list.

I have a nice pair of One piece spindles, $1800 plus shipping, Send me an e-mail with cell phone # for pictures. Thanks, Dennis

?looking for the small coil tester that fun projects produced..........thank you

For Sale 1909 Kingston 5 BAll Carburetor excellent shape. $1500.00 Call John 352-256-7234.

F/S: Ruckstall Shift Rod Support. $15.00 plus shipping.

R/S,
Jonathan Bodine

I have 19 coils of which non have the Ford Script but are in pretty good condition but untested. If interested text me for pictures 631 445 five six 9 seven.

Manny

Ford Motor Co. began selling cars in July 1903. The company experienced immediate success, and sold almost 200 cars by the start of their first full fiscal year, beginning October 1, 1903. The Electric Vehicle Co. wasted little time initiating a law suit. This author indicates the suit is expected to last for years. He was right.

IMG_6244.jpeg...

I am in need of a usable Radius Rod Ball Cap, part number T217. Must be the forged style used from 1909 through early 1914. Please send photos to my email or post here. Thanks very much

You will remember last year I built this speedster on the forum. IMG_2278.png

Now that the snow is gone, it’s time to get some paint on it. This will NOT be a show car, so I started by painting the chassis dirty equipment black, outside, hanging by a forklift. I’m pretty happy with the outcome. IMG_4013.jpeg IMG_4017.jpeg IMG_4014.jpeg...

Full frame up no expense spared restoration Ex Joe Henshaw ex Lud Gocek. Stunning concours and correct restoration Midnite blue and black
Closed valve motor with electric start added for ease of operation. Wood bands.
12 rivet Clamshell diff with 2 pc driveshaft. Original brass with new brassworks radiator. All original sheet metal excepting new...

I have a few sets of tubular front and rear shocks various brands. $100 pr plus post

Looking for a left and right side window glass channel for my 27 tudor also need a drive side window trim that goes on the bottom where your arm rests 4 hold for a tudor also

In need of 26-27 Roadster Sill Plates Aluminum to finish a restoration I am doing with my grandson.

Looking for the Hose Connector Boyce Motometer Co. supplied with their Red Ball column or dash mount gauge.
]Howard Dennis

100_4758 - Copy.JPG

For sale: Rare valve spring depressor. $45 plus shipping
20250415_092330.jpg 20250415_092343.jpg 20250415_092359.jpg

I need a drivers side front bumper bracket for my 1926 Runabout.

Mike Russell
Columbia, MO.
ml.russell1936@gmail.com
573 864 6539 Please leave a message if I don't answer my phone.

For sale: new stop light switch $25 plus postage
20250416_111554.jpg

Left over wood parts for a 1924-25 Touring from a Fordwood re-wood kit. Part # 193-Door wood driver rear, 3pcs. bottom of door piece not included. #355 Pillar #4 driver side. #314 Pillar #2 passenger side. #167 panel brace driver side. #303&304 cowl rails. #325 floor riser, tack strip front.
$100+$25 UPS shipping. Check or paypal. Email me through...

I have some Cast Iron Oval Double Stacked mag coils for cores. Any interest? Can bring to Luray. Email me Dan

OK - now here is a long shot request. Does anyone out there have an original U & J hot air pipe for for grabs? It has a corrugated elbow .- Dusty

Hi,
I have a 1923 Ford Model T in the Twin Cities, MN that I need to get running. Will pay for the assistance.
Thanks You,
Ted
651-336-5196

HI, looking for 4 possible tire tubes with metal stems, 30 x 3 1/2. Also hardware and Dustcovers. Thank you!

1926 Touring is a recent purchase as I had to buy 2 cars from an estate to get the car I wanted. Compression average 48-50, runs on mag, lights work, generator charges, body seems solid, top needs some TLC, 21 inch tires. Located near KC. Happy to answer questions and send more photos. Please email as I am not great with the PM. Asking $7500....

I am not one to normally post a link to an active Ebay listing but this one caught my eye as quite odd/interesting:

stolen.jpg

For Sale bottom frame in pictures. Has DB axle, 13-14 rear axle. Both tapered springs. Fender brackets, firewall brackets & HL forks. $700 Moorhead MN Steve 701 212 5009 Sold

For Sale 2 bare frames correct for late 13-16. Both have RB brackets which tells me they were never trailers. $100 each. Moorhead MN Steve 701 212 5009

For Sale, all this tin for 1914. $100. Moorhead MN Steve 701 212 5009

For Sale 2 early frames. 1 has broken front crossmember $450. 1 has RS rail gone, but has LS fender iron and 11-12 RB brackets $350 Moorhead MN Steve 701 212 5009

For Sale, wheel parts and 2 rear hubs probably from a small Overland. NO CAPS. $400 Moorhead MN Steve 701 212 5009

Fords are rare in early photos of the Tonopah rush, but here’s one.

For Sale - What is a New Old Stock Champion Spark Plug worth? Email me.

Don't seem to be able to post with ad. IMG_3376.jpg IMG_3385 (1).jpg
Pics of school presentation & Veterans day parade Grand Marshal.
Craig

A friend in Maryland has two frames for sale and the price is reasonable. Email me if you are interested.

Nice 75 MPH Stewart nickel plated speedo with firewall mounting bracket. Everything moves and trip meter resets BUT the needle shaft is loose and flops around so it will need to be repaired. $160 includes US shipping.

I am in need of a set of 1911 Running Boards for a project. Rootlieb is out of stock and not sure if they are making anymore. Thanks John 201-Three one five - 7373. call or text. E-mail john (at) royalmaster.com

-
-
Please print this update and bring it to the Meet. It has information that will help smooth your way.

Our event is less than 3 weeks away and all is set for you at Minter Airfield. Thank you for participating and getting the word out so far and wide. As of this email, more than 160 (of the 192 available) spaces have been reserved and paid...

I am in need of two (2) rear shade roll assemblies for a 1926-‘27 closed car. That is the hollow metal tube that the shade attaches to and the (2) rounded end pieces that connect it to the wall of the interior. Does anyone have these that I could purchase? I need two sets. Cloth shade is not necessary. The picture shows the coiled spring ratchet...

I cannot find my Mel Miller drawings from way back when.
I would like to buy an original set, decent copy, pdf, whatever in that order.
I have an early 23 touring. Slant windshield, one man top, low hood.
I very much appreciate any help with this quest. Jeff

Model B Ford distributor , is centrifugal advance unit designed for 1932 thru 1934 B series 4 cylinder Ford engines ... fits and works very well in Model A engines ... will need cleaning and new shaft bushings , points etc. ... price $90 + $19.15 postage in lower 48 states , actual postage outside this area or INTERNATIONAL ... contact thru MTFCA...

re-babbitted model T connecting rods ...-.010 diameter ... these rods are from old auto re-builder stock ... X oil grooved and drilled for dippers ...use with -.010 re-ground crankshaft or use Timesaver lapping compound to fit to worn Standard crankshaft ... these rods have been in my storage for over 25 years ... priced at $250 + $19.15 postage...

I have a 20 foot car hauling trailer, looking for a load going East. Resonable rates. Looking for the middle of May. 360 cr1 qqv0

For sale ... 5 model B Ford 4 cyl. connecting rods for re-babbitt ... B carburator for parts ... mounting flange is broken on front side , otherwise the bowl and shafts are all in re-buildable condition ... i also have a B crankshaft listed on this site ... may find more B items as i dig deeper into my storage sheds ...price for the 5 connecting...

For sale:like new pitman arm with Ford script $40 plus postage

20250327_175001.jpg

For sale: spare tire carrier with nuts $100 plus shipping
20250405_171149.jpg 20250405_171212.jpg

Wanted: 1917-1925 T chassis, must have full drivetrain, would prefer a running chassis but any condition is acceptable. Posting for a friend who wants to build a T express for his peanut business. **Update** Will also take entire closed or open cab express fitting the before description

Has anyone installed a lang’s pick up box on a 1925 roadster. If so do you have pics? Also is the front of the box tapered back to accommodate the seat bucket.

For sale: sediment bowl with shutoff $75 plus postage

20250324_144608.jpg 20250324_144554.jpg 20250324_144642.jpg

For sale tail light body $10 plus postage
20250327_183104.jpg 20250327_183052.jpg

WTB old script floor mat. Used but usable condition using it in an older restoration 1915 roadster.

brasscarguy@comcast.net 2ho6 919-1949(Seattle)

I'd like to buy two (2) of the 30 x 3 whitewall tires, and one (1) 30 x 3-1/2 whitewall tire, just like in the picture.

Please e-mail me a picture of the front of the tire(s) you have, as well as a picture of the back of the tire, showing the size.

Or, text to me at 901-496-8795.

Thank you.

Bill Everett

Model T Whitewall Tire 30X3.jpeg

For sale: Tool bag with snaps $20 plus shipping
20250403_141047.jpg

For sale: good head $100 plus shipping
20241029_172928.jpg

In need of 3 30 x 3 1/2 demountable rims in usable condition. Thanks Jim

Needing 4 30 x 3 1/2 tires in good usable condition, any brand is fine. Thanks Jim

Decent looking brass holey carb body bowl is rusty inside 60$ plus the ride

SOLD 1919-22 Restored Turtle Deck.

The narrative by a Detroit Free Press writer in 1905 about Henry Ford, Cadillac and Henry Leland and their interactions is a bit different from historians writings decades later.

Black, Bowen, White and Murphy, Detroit financiers, had capitalized a company years before Detroit Automobile Co., and attempted to build an electric auto. Ford was...

In good condition some with ball bearings, spokes are in good condition also, 2 1915 type front and 2 later front wheels. $350 for the 15's and $300 for the later ones. All are 30x3 Clincher style with good usable edges. Plus shipping in US, Pictures to your email or text. Jim nine7zero 37three 88six 4.

Here is a carrier out of T rear end. Has both halves, the spider with gears and bolts. Locking pins for thrust washers look good. Ring gear is there but don’t know if it’s good enough to use, your choice. See pictures. $45 + shipping. Email me by forum. Dan
IMG_4323.jpeg
IMG_4324.jpeg
IMG_4325.jpeg
IMG_4326.jpeg

FS Three used water pumps:
Top: Eskimo water pump, turns freely, front pulley is damaged
Center: Jewel water pump, turns freely
Bottom: Unbranded water pump, a real typical generic pump, looks restorable
Asking $10 each or $25 for all three, shipping not included.

twpmp01.jpg

Thanks for looking!

Have a nice tight Ford Script u-joint for sale.$75 plus shipping

Brand new. Never used it. Had to have the OD of the bushings turned down, the machine shop ended up just honing the bushings to the kingpins.

$80 shipped to your door, PayPal friends, and family, check, or Venmo

IMG_1740.jpeg

I have added another resource to the Kids Corner page, a practical exercise for the younger kids — How to Make Your Own Model T Ford at Home . Take a look at the Kids Corner section on my website, and please let me know what you think of this new addition. It comes complete with a downloadable and printable template, as well as a short video...

For sale: Cross member with brackets in very good condition $150 plus shipping

20250325_155833.jpg 20250325_155845.jpg

For sale: water outlet $30 plus shipping

20250324_171742.jpg

Selling new never used 30x3 and 30x3 1/2 clincher rims. Black powder coated but some have some small scratches.

$560 plus shipping

Located in Clio, MI

Email: steven.newman1909@gmail.com
Phone: 810-210-9527

For Sale is an Operator's Manual for a 1948 Ford Tractor Model 8N. Cover somewhat faded , some soiling. This manual shows light use, nonetheless all pages present and in excellent shape. $65.00 plus shipping.

Please contact me by email or phone. Thank you for your interest and for looking.

R/S,
Jonathan Bodine
1 406 498 3946

i got lucky today at the swap meet and found a Manco alignment tool will be trying to learn more about it at as time goes by. i also picked up a nos fun projects voltage regulator. 12 volt. i may be asking questions how to use the alignment tool.

Only have the one . 45.00 plus shipping. ctleonard64@gmail.com IMG_20250328_104035290.jpg IMG_20250328_104114522.jpg IMG_20250328_104044350.jpg

WTB HORN 26-27 WITH BRACKETS IN GOOD WORNING ORDER
TOM

WTB HORN 26-27 WITH BRACKETS
TOM

WTB Winfield S or SR parts-some to trade. Looking for BB or C double ended ball linkage and pressed steel levers, Screws and nuts like in photos. Any help appreciated.

New Bitmap image (2).jpg

20241226_115044.jpg

Mark

WTB Dayton #3 pin drive Knock on hub cap for pattern to cast a set of new ones for my Fronty. Damaged ok. Any help appreciated. Thanks to the member here for the use of the photos.

359246 10-08-2011 Dayton Knock Off Hub Cap.jpg

2018-03-10 Dayton #3 Knock Off Wheel Caps 027549.jpg

Mark

Want to buy a very late 1925 open car dashboard. They can be identified by a large 1/4 carburetor adjusting hole and larger indentation around it. Would like one in excellent condition. I have lots of earlier ones to trade or sell that have a 3/16 hole. This type of dash uses the 1926 style carburetor adjusting rod that I'm looking for.