MTFCA Forum

Ford Tough….

IMG_3951.jpeg

Set of Gas,Oil,Water Cans - No Holder - Red Can needs paint touch up after falling off shelf onto my forehead asking $300.00 plus shipping give me a call 50 three-8 two 4-268 one

For Sale is a Model A Cylinder Head Removing Tool. $50.00 plus shipping Lang’s 1-800-872-7871

For Sale is an original KR Wilson crank shaft Tool (Flywheel Housing Indicator) It’s in excellent condition. $225.00 plus shipping Lang’s 1-800-872-7871

For Sale is a “Car Cuf” anti theft Wheel Clamp most likely used on 30 x 3 or 30 x 3-1/2 wheels. Looks to be NOS $125.00 plus shipping Lang’s 1-800-872-7871

For Sale is a rare 1926 - 1927 Kingston Regenerator Carburetor. Most likely needs to be rebuilt. $275.00 plus shipping Lang’s 1-800-872-7871

For Sale are a pair of 1909-11 Touring rear door latches. They have been glass beaded and are in good condition. $250.00 plus shipping Lang’s 1-800-872-7871

I have some body plans and templates for model F Ford, free to a good home, just pay postage. Kdmks At att.net.

1917 Model T for sale $8500
runs & looks great, lots of new parts, no rust, located in Kingman, Az.
for details & photos email me at kingmanjeepers@gmail.com

I have 3 - nice 26-7 coilboxes with covers, $115 plus shipping, 26-7 engine blocks $350 plus shipping, 26-7 rear axle housings
$100 plus shipping, 2-3 High radiators $150 each plus shipping. 26-7 frames excellant condition $350 each. All items can be picked up in Ct 06013. Email needs with contact# I will call you back to discuss all items and...

I have a great start on a 1914 WW1 Ambulance Body and Chassis, 85 % finished but all materials are there to finish this neat
piece of U S History. Located in Ct 06013 25 miles from Hartford. I can Deliver within a 100 mile radius for fuel. Asking $4,500 Email for pictures and send Contact# to discuss the project. You will not be disappointed with...

One set of RayDay aluminum pistons .100 oversize. No pins. Standard pins are available from the dealers. Price is $50.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20260216_094600.jpg

20260216_094657.jpg

20260216_094625.jpg

One set of standard aluminum pistons .030 oversize with pins and rings. Price is $150.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20260216_093722.jpg

20260216_093755.jpg

Random muffler ends 15$ each plus the ride

First off no brass hubs that being said thinning out 4 milk crates of fan hubs. Aluminum and steel hubs. fans are mostly bad what your buying is the hubs. 10each plus the ride buy a bunch I'll cut you a huge deal. alot of these are getting tossed next scrap load

Here one for you doers out there ruckstell housing had been made into a tractor rear end need new axle tube housing is nice 300$ plus the ride

I am looking for someone who could repair a small crack in the rear exhaust port of a 1909 Part Number T511 Manifold. See attached photos. Please reply to my email or on the forum.

Thanks Daniel Snell Exhaust Manifold T511 - A.jpg Exhaust Manifold T511 - B.jpg Exhaust Manifold T511 - C.jpg

I did not buy this originally or ever use it, so the condition is unknown. It does not appear to be abused or damaged, but even so sold as For Parts Only . $45 and that includes shipping in the CONUS.

Last Chance!
for those wanting an engine rebuilt for this years touring season. We have just enough time to do one more engine and get it back to you before we leave. I’m planning a 5,000 mile trip to AZ and back for the entire month of June. The trip will be filmed and posted to youtube, potential filmed destinations include the AACA museum in...

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $150...

For sale: Bracket $25 plus postage

20220628_065848.jpg

Clutch appears to be defective. Sorry for not checking sooner

For Sale Dodge Bros. spare tire carrier with four lug nuts. 3-7/8 inches between studs. Will need re-drilling for speedster. Price $275 plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale: a 1914 original manual.

$112 a dollar per year since printed plus USPS mail.

Available again is Part # 3004B 1917-1925 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

For sale 15-1/4 inch OD steering wheel. Steering wheel is marked Dodge Bros. twice, around each keyway. Price $250. plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale brass 15-inch OD steering wheel with new brass nut. Single keyway repro. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Completely disassembled and cleaned, new float, float valve, venturi, and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

How about a nice set of 1926 Michigan license plates for your car. These can be registered and run as original plates. These were redone by Duane Wells many years ago. $125 and $15 shipping. Email me at markpaulagember AT aol dot com

Just as stated. A single 1926 Michigan license plate that is original unrestored. $50 and $10 shipping. Email me at markpaulagember AT aol DOT com

A brand-new Nickel radiator cap. These are not in stock at the venders. $25 and $10 shipping. Email me at markpaulagember AT aol DOT com

Model T 1926/27 Walker stamped ratchet style jack T2343. This jack works as it should. These are not listed often and are hard to find. $150 and $15 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

Great condition original single brass tube Ford script tire pump. (1920-27) Rebuilt by Vern Cambell several years ago. $150 and $25 shipping. Email me at markpaulagember AT aol dot com

Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED. Dealers are asking $36.95 + the ride
ENJOY YOUR DAY!

Completely disassembled and cleaned, pressure tested float, new needle and seat, choke spring, reconditioned spray needle, test run. $195 postpaid to continental USA email: wlkma9@gmail.com

Completely disassembled and cleaned, pressure tested float, new needle and seat, choke spring, reconditioned spray needle, test run. $195 postpaid to continental USA email: wlkma9@gmail.com

I know the 2nd owner started a partial restoration on Daisy in the mid/late 60's after being stored since 1935.
Cleaning up the wood on her, while the firewall is original, the hood boards are replacements built by Syverson Cabinet, from their Des Plaines location they vacated mid 60's.
Just some continuing interesting archeology......

As subject line states...this is the last week I will take requests for brushes to be custom made for the TW timer.
See my listing in the parts section. Thank you.

For Sale rubes horn $225 plus shipping.
Has reed and honks.

4 original parts books. Some loose covers, dirty, with some writing on them. Not reprints, but priced about the same. $45 include shipping in the CONUS.
6DD1B400-B9EE-4F5F-A46B-A14AA0BF251E_1_201_a.jpeg
23702D26-680D-43DD-B3DB-44C2E695C588_1_201_a.jpeg
C5A214BC-175D-48AA-A94B-B68BFF4B80F2_1_201_a.jpeg...

Looking for a U & J manifold for my 26 T. Please let me know if you have anything.
Thanks.

I’m looking for a glass reflector for a e & j 656.
I have some things to trade, or cash.
I can switch to the metal reflectors but then I’d need two because I want them to match.

For sale a Cornwell-A wrench. It is 11/16 box on one end and a socket on the other. Like new
15.5 inches long $15 plus postage

text 314-575-7115 for picture

Found parts. thanks

Only two or three Model N were assembled by the NY auto show, with only one running for outside demonstrations. This one was hastily elevated for easy viewing. The radiator is not connected to the block. Differences from the production N included the timer located at the front of the motor (where it should be). There’s a celebrity in the crowd...

YEEEEEOOOWWW!!!

I have the back half of a ‘26-‘27 Coupe. I am looking for a trunk lid and front cowl to try and resurrect it to a complete car.

I am in Oregon so only really looking for the parts in Washington/Oregon or far northern California.

Any help is appreciated. Easiest to reach me by email at vwfool@aol.com or by cell at 602-616-3083

Thanks

For Sale is a head unit for an unknown manufacturer engine stand. It is in very good condition. $150.00 plus shipping. Lang’s 1-800-872-7871

For Sale are 2 tools used when removing and installing the Driveshaft bushing for Model A’s and V8 Fords. $300.00 plus shipping Lang’s 1-800-872-7871

This engine stand bracket (head unit) is of unknown manufacturer. Any ideas?

91 issues of Skinned Knuckles Nov 2013 to Sept 2021 Missing issues Dec 2020 and Feb 2018 $50 plus shipping in USA

For sale: Timing gear and transmission driven gear puller $45 plus postage
5Z326
20251121_213057.jpg 20251121_213011.jpg

Many of you are members of Ford & Friends on FB. You don’t have to be a member to open the link. Over the last several days Gary A. has added many good period photos of NRS and other early Fords. Click on the link below to open the page:

IMG_3666.jpeg

For sale Locking flip steering wheel. Very nice clean unit looks to be complete minus key. 350.00 plus the ride. Mark Eyre Battle Creek Mi. Contact me through this site.

For sale: Choice on flywheel capscrew wrenches $25 each plus shipping
number changes thru the years

20250901_152022.jpg

i have finished another short run of mainbearing quick bolts for model A and T Ford engines ... these speed up the tedious process of fitting the mainbearings ...most often used in re-fitting used bearings with the engine on a stand ...price is $150.00 + $12.95 postage in lower 48 states ...actual postage outside this area or INTERNATIONAL ......

For sale: Brass exhaust whistle $350 plus postage
20260129_190435.jpg 20260129_190411.jpg

A nice original ppamphlet with photos and fitting instructions. $12 including postage to your door. 20260125_120256.jpg 20260125_120324.jpg 20260125_120355.jpg 20260125_120419.jpg
Allan from down under.

Here is a very early T-1917 wrench. It had the large Ford Script. $75 plus shipping.

mikebird@lifeattheridge.net

IMG_4483.jpeg
IMG_4482.jpeg

Here is one of those brass shut off accessory valves that are no longer carried by the vendors.
$125 plus shipping

mikebird@lifeattheridge.net

IMG_4480.jpeg IMG_4481.jpeg

I have a few pieces of a brass mirror. This was the mirror sold by Vintique.
$25 plus shipping

mikebird@lifeattheridge.net
IMG_4478.jpeg IMG_4479.jpeg

A very nice brass sediment bulb for the 11/torpedo
$250 plus shipping.

mikebird@lifeattheridge.net
IMG_4477.jpeg IMG_4476.jpeg IMG_4475.jpeg

Henry Ford at the wheel of a 1907-08 Ford Model K, parked in front of the Ford New York branch store. A K roadster is parked behind and reflected in the store window. Beside Ford is NY Branch Manager Gaston Plaintiff. Back seat: left-James Couzens, FMC CFO. Right-E. E. Rice, advertising firm owner.
(original photo courtesy of The Henry Ford, all...

I'm not the seller, but a seller on Facebook out of Lubbock, Texas, has one 6.00x20 Denman tire for sale at only TEN Dollars $10.00 ! He will ship at buyers expense. The tire looks to maybe have been mounted at one time, but appears to have new tread and no age cracking. If you are interested and can't locate it on Facebook Marketplace, I'll put...

For sale: Ford script bendix puller 5Z323 very good condition
$95 plus postage
20260201_220640.jpg 20260201_220659.jpg

Does anyone have a Reamer for a Steven's Axle tool they would like to sell ?

Thanks
Steve

For sale: carburetor $100 plus postage

20241227_113935.jpg 20241227_113922.jpg

For sale: sediment bowl $50 plus postage

20250324_144554.jpg 20250324_144608.jpg 20250324_144642.jpg

(SOLD) Reeder aluminum high compression low head. Never installed Reeder head. Marked Reeder inside water jacket. !/2-inch pipe thread spark plug holes. Price $500 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Sold pending payment. thank you Tom.

For Sale- very nice condition 35 tooth 8 Pitch road gear for use with the Ford Special speedometer. No visible wear. $40.00 plus $12.00 USPS shipping.
PP or check please. PM or e-mail to DMCGEARSatYAHOOdotCOM.

KIMG2085.JPG

For Sale- Ford 5Z-210 Flywheel Bolt Wrench. This is the wrench you need to remove or tighten the four flywheel bolts that hold the flywheel to the crankshaft flange. The offset makes getting behind the magnet bolts easy. $30.00 + $12.00 USPS shipping.
PP or check. Please PM or e-mail to DMCGEARSatYAHOOdotCOM. Thanks!

KIMG2081.JPG

KIMG2083.JPG...

For Sale- Ford factory tool #5Z-209 for removing and installing the piston wrist pin
pinch bolt in connecting rods. Great shape- no markings or modifications.
$25.00 plus $12.00 USPS Priority Mail Shipping.
PP or check please. PM me or e-mail DMCGEARSatYAHOOdotCOM.
KIMG2078.JPG
KIMG2079.JPG
KIMG2080.JPG

For sale: a no name valve spring lifter $25
3Z602 valve spring lifter $25
5Z319 valve spring lifter $50
Frank Mossberg #627 carb flange & generator 5/8 & 9/16 $35
all plus shipping

20260129_224842.jpg 20260129_224818.jpg

For sale: Ford script 5Z152 rear axle housing nut wrench $25
Ford script 5Z156 main bearing bolt L socket wrench $25
Ford script 5Z157 #4 connecting rod cap bolt nut $35
Ford script 5Z817 carb to flange and generator to cyclinder block $35
T269A $20
all plus postage

20260129_225038.jpg

For Sale- set of 8 original demountable rim bolts. Used but have been bead blasted and primed. Threads are in great condition. (the bent looking one is actually straight!) $15.00 /set plus $12
USPS Priority mail shipping.
I have several sets.
PP or check. PM or Email to DMCGEARSatYAHOOdotCOM. Thanks!

For Sale- set of 12 rear wheel rim clamps for the 20 TT rear Wheel. (30 x 5 tire size). Bead blasted and Primed
These are the rim clamps that have the FORD script.
$120.00 plus $15.00 USPS shipping. PP or check for payment.
PM or e-mail to DMCGEARSatYAHOOdotCOM.

KIMG2062.JPG

KIMG2063.JPG

KIMG2066.JPG

For Sale= lot of 7 rim clamps for the 23 Rim. These are the 2 piece clamps with the captive
7/16 nut. $75.00 plus $12.00 USPS shipping. Beadblasted and primed. PMT via PP or check.
PM or email to DMCGEARSatYAHOOdotCOM.
KIMG2057.JPG

KIMG2056.JPG

For Sale- set of 12 Rim Bolts for the 23 TT rear wheels. New Reproductions.
Rim bolt for Ton Truck rear 23 rims, 7/16 x 20 fine thread.
3-3/8 long from under the head of the bolt.
$50.00 for set of 12 plus 3 original bolts. $15.00 USPS shipping.
See my other ad for the hard to find 2 piece rim clamps for 23 rims.
PM or email to...

Right now on AACA parts for sale are some 14 mm Take apart plugs for sale. Not mine just passing the info.

For Sale- Ford 3Z-501 Flywheel Bolt Wrench. This is the wrench you need to remove or tighten the four flywheel bolts that hold the flywheel to the crankshaft flange. The offset makes getting behind the magnet bolts easy. $30.00 + $12.00 USPS shipping.
PP or check. Please PM or e-mail to DMCGEARSatYAHOOdotCOM. Thanks!

KIMG1980.JPG

KIMG1982.JPG

For Sale- Boyco Can with Screw On lid. Dent on back side looks worse than it is. Appears solid.
$40.00 plus shipping.
PP or check. Please PM or e-mail to DMCGEARSatYAHOOdotCOM. Thanks!
KIMG1974.JPG

KIMG1975.JPG

KIMG1976.JPG

This article appeared in the “Boston Evening Transcript,” describing the cars shown at the recently completed New York Auto Show(s). This was the year the ALAM (Selden Patent) rented the Garden for ALAM cars only, and the Independents secured the 69th St. Armory. This is the show Ford presented the highly anticipated $500 Model N. It’s also where...

Tuning a batch of Kingston High Bridge. This model coil was used in Model T from 1909-1910. There are a few original coils in this batch and the rest are brand new coils. The brass bridge was cast and machined and new wood boxes made.

If you are following the updates to early coil points I have been doing to get them to run more stable, I did...

Tuning a batch of Kingston High Bridge. This model coil was used in Model T from 1909-1910. There are a few original coils in this batch and the rest are brand new coils. The brass bridge was cast and machined and new wood boxes made.

If you are following the updates to early coil points I have been doing to get them to run more stable, I did...

FS: one Rest-O-Lite bracket for an accessory running-board mounted acetylene tank. That's not a typo - this was apparently a knock-off. It's solidly built nevertheless. It will need to be cleaned up, as the wingnut is rusted in place and one of the 'wings' is missing. Asking $50 not including shipping.

resto01.jpg

resto02.jpg

resto03.jpg...

I got this beautiful, intriguing jump seat over 40 years ago and kept it thinking I may use it but my focus is on my T parts inventory that is available. This is only T related if it could be used in a Depot Hack. The hardware is Nickel plated and the fabric says it is late twenties to early thirties. I'm wanting $200 for it. It weighs 11.4 Lbs...

As the title says NOS, $25 + mail. Tie Rod Anti Rattlers.jpg

It has been a while since Dewey Asher has been to any big tours, but he and Pat went on a number of national, international, and Tennessee T tours.

Ron Dupree

FS: Door skin for touring car 1917-1925, left rear. It's rusty and there's pitting and some pinhole rust along the edges, but it could be restored with some effort. $5 not including shipping.

tlrdr01.jpg

tlrdr02.jpg

tlrdr03.jpg

Thanks for looking!

I have a KR Wilson HCCT that has a broken crank handle , looking to see if someone has one available out there before I try to fabricate/repair the one I have , mine has the Pointer but the handle is busted off and missing . ( the way I got it ) thanks in advance.

Looking for an early cylinder head water outlet in good condition for use with a brass radiator. It's the stubby one.

Screenshot 2026-01-24 121043.jpg

I have for sale an early straight left-hand side headlamp fork. Good threads, $65 plus shipping to lower 48. You can reach me through text message or through the forum. My number is 419-217-8884.

Counter weighted cranks and 280 cams will be at the Turlock swap Saturday, space GG59. Cash only

Nice pair of front spindles correct for 1911-1918 with correct straight steering arms. No wear grooves or smashed threads. Could probably use some new bushings.

SOLD! $100 plus shipping in the U.S.

IMG_8965.jpeg

IMG_8966.jpeg

IMG_8967.jpeg

IMG_8968.jpeg

For Sale is a nice hardware kit for a pickup bed or accessory wood body. Rear tailgate hinges are not included but are easily made. SOLD plus shipping Lang’s 1-800-872-7871

See add under cars for sale 1919 PU

2 piece drive shafts DB axle other early brass Era parts at Turlock A's swapmeet Jan. 24/ 25 spaces C 30/32/34 zone 1 call or tex Phillip 209 769-3384.

FS EARLY T PARTS 1912 JB headlamps 2 piece drives DB front axle. and more brass era parts At Turlock CAL. A's swapmeet jan.24/25 . See Phillip in zone 1 spaces C 30/ 32 / 34. Call or tex 209 769 3384

Possibly already posted, but with a heavy heart I bring sad news of another patriarch passing. Gary Cooper, one of the last founders of the Southern Nevada Model T Club. He was instrumental in the restoration of the pie wagon. Screenshot_20260119-062125_YouTube.jpg