MTFCA Forum

I am looking for the windshield garnish with swing arm bracket attached, for a 1923 Fordor Sedan. I believe the 1924 & 1925 models used the same garnish. There are some photos on this forum from a few years ago, showing exactly what I need. But have not yet been able to reach the gentleman that posted the photos. Any help would be greatly...

YEEEEEOOOWWW!!!

Hi all,

I'm looking for an aluminum oil sump for a 4 dip oil pan. I need it for a speedster engine I'm in the process of building.

Thanks in advance

What I have for sale is a brand new Texas T Leakless water pump. I do not have the hose. $300 plus shipping of $12.00 8n the lower 48 states
Eric Smith.
815 535 1367
1958els@gmail.com

I have the back half of a ‘26-‘27 Coupe. I am looking for a trunk lid and front cowl to try and resurrect it to a complete car.

I am in Oregon so only really looking for the parts in Washington/Oregon or far northern California.

Any help is appreciated. Easiest to reach me by email at vwfool@aol.com or by cell at 602-616-3083

Thanks

For Sale is a head unit for an unknown manufacturer engine stand. It is in very good condition. $150.00 plus shipping. Lang’s 1-800-872-7871

For Sale are 2 tools used when removing and installing the Driveshaft bushing for Model A’s and V8 Fords. $300.00 plus shipping Lang’s 1-800-872-7871

This engine stand bracket (head unit) is of unknown manufacturer. Any ideas?

VIN 13605442. Excellent condition. Was running when parked 8 years ago. Stored inside. Original engine and transmission as far as I can tell. Car is located in Spring Hill, TN and has a valid title. $12,000.

91 issues of Skinned Knuckles Nov 2013 to Sept 2021 Missing issues Dec 2020 and Feb 2018 $50 plus shipping in USA

For sale: Timing gear and transmission driven gear puller $45 plus postage
5Z326
20251121_213057.jpg 20251121_213011.jpg

Many of you are members of Ford & Friends on FB. You don’t have to be a member to open the link. Over the last several days Gary A. has added many good period photos of NRS and other early Fords. Click on the link below to open the page:

IMG_3666.jpeg

For sale Locking flip steering wheel. Very nice clean unit looks to be complete minus key. 350.00 plus the ride. Mark Eyre Battle Creek Mi. Contact me through this site.

For sale: Choice on flywheel capscrew wrenches $25 each plus shipping
number changes thru the years

20250901_152022.jpg

i have finished another short run of mainbearing quick bolts for model A and T Ford engines ... these speed up the tedious process of fitting the mainbearings ...most often used in re-fitting used bearings with the engine on a stand ...price is $150.00 + $12.95 postage in lower 48 states ...actual postage outside this area or INTERNATIONAL ......

For sale: whistle $350 plus postage
20260129_190435.jpg 20260129_190411.jpg

A nice original ppamphlet with photos and fitting instructions. $12 including postage to your door. 20260125_120256.jpg 20260125_120324.jpg 20260125_120355.jpg 20260125_120419.jpg
Allan from down under.

For Sale is an original 1914 “Rubes” all brass Horn. There are 3 dents that won’t shown when mounted. $125.00 plus shipping. Lang’s 1-800-872-7871

For Sale is an older “New” set of .100 oversize Pistons with pins. $125.00 set plus shipping. Lang’s 1-800-872-7871

Here is a very early T-1917 wrench. It had the large Ford Script. $75 plus shipping.

mikebird@lifeattheridge.net

IMG_4483.jpeg
IMG_4482.jpeg

Here is one of those brass shut off accessory valves that are no longer carried by the vendors.
$125 plus shipping

mikebird@lifeattheridge.net

IMG_4480.jpeg IMG_4481.jpeg

I have a few pieces of a brass mirror. This was the mirror sold by Vintique.
$25 plus shipping

mikebird@lifeattheridge.net
IMG_4478.jpeg IMG_4479.jpeg

A very nice brass sediment bulb for the 11/torpedo
$250 plus shipping.

mikebird@lifeattheridge.net
IMG_4477.jpeg IMG_4476.jpeg IMG_4475.jpeg

Henry Ford at the wheel of a 1907-08 Ford Model K, parked in front of the Ford New York branch store. A K roadster is parked behind and reflected in the store window. Beside Ford is NY Branch Manager Gaston Plaintiff. Back seat: left-James Couzens, FMC CFO. Right-E. E. Rice, advertising firm owner.
(original photo courtesy of The Henry Ford, all...

I'm not the seller, but a seller on Facebook out of Lubbock, Texas, has one 6.00x20 Denman tire for sale at only TEN Dollars $10.00 ! He will ship at buyers expense. The tire looks to maybe have been mounted at one time, but appears to have new tread and no age cracking. If you are interested and can't locate it on Facebook Marketplace, I'll put...

For sale: Ford script bendix puller 5Z323 very good condition
$95 plus postage
20260201_220640.jpg 20260201_220659.jpg

Does anyone have a Reamer for a Steven's Axle tool they would like to sell ?

Thanks
Steve

For sale: carburetor $100 plus postage

20241227_113935.jpg 20241227_113922.jpg

For sale: sediment bowl $50 plus postage

20250324_144554.jpg 20250324_144608.jpg 20250324_144642.jpg

(SOLD) Reeder aluminum high compression low head. Never installed Reeder head. Marked Reeder inside water jacket. !/2-inch pipe thread spark plug holes. Price $500 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Sold pending payment. thank you Tom.

For Sale- very nice condition 35 tooth 8 Pitch road gear for use with the Ford Special speedometer. No visible wear. $40.00 plus $12.00 USPS shipping.
PP or check please. PM or e-mail to DMCGEARSatYAHOOdotCOM.

KIMG2085.JPG

For Sale- Ford 5Z-210 Flywheel Bolt Wrench. This is the wrench you need to remove or tighten the four flywheel bolts that hold the flywheel to the crankshaft flange. The offset makes getting behind the magnet bolts easy. $30.00 + $12.00 USPS shipping.
PP or check. Please PM or e-mail to DMCGEARSatYAHOOdotCOM. Thanks!

KIMG2081.JPG

KIMG2083.JPG...

For Sale- Ford factory tool #5Z-209 for removing and installing the piston wrist pin
pinch bolt in connecting rods. Great shape- no markings or modifications.
$25.00 plus $12.00 USPS Priority Mail Shipping.
PP or check please. PM me or e-mail DMCGEARSatYAHOOdotCOM.
KIMG2078.JPG
KIMG2079.JPG
KIMG2080.JPG

For sale: a no name valve spring lifter $25
3Z602 valve spring lifter $25
5Z319 valve spring lifter $50
Frank Mossberg #627 carb flange & generator 5/8 & 9/16 $35
all plus shipping

20260129_224842.jpg 20260129_224818.jpg

For sale: Ford script 5Z152 rear axle housing nut wrench $25
Ford script 5Z156 main bearing bolt L socket wrench $25
Ford script 5Z157 #4 connecting rod cap bolt nut $35
Ford script 5Z817 carb to flange and generator to cyclinder block $35
T269A $20
all plus postage

20260129_225038.jpg

Several lots (#11-15) of left over parts from the improved Coupe project:

screws 11-15.jpg

Set of (6) Transmission inspection cover SCREWS for added oil lint filter, 1/8 longer.
Zinc Round head, slot drive, machine screw 5/16-18 x 1/2 . Lot $0.50

As-is, no warranty.
UPS or USPS shipping (no FedEx).
A. Please claim BELOW that you want a set...

For Sale- set of 8 original demountable rim bolts. Used but have been bead blasted and primed. Threads are in great condition. (the bent looking one is actually straight!) $15.00 /set plus $12
USPS Priority mail shipping.
I have several sets.
PP or check. PM or Email to DMCGEARSatYAHOOdotCOM. Thanks!

For Sale- set of 12 rear wheel rim clamps for the 20 TT rear Wheel. (30 x 5 tire size). Bead blasted and Primed
These are the rim clamps that have the FORD script.
$120.00 plus $15.00 USPS shipping. PP or check for payment.
PM or e-mail to DMCGEARSatYAHOOdotCOM.

KIMG2062.JPG

KIMG2063.JPG

KIMG2066.JPG

For Sale= lot of 7 rim clamps for the 23 Rim. These are the 2 piece clamps with the captive
7/16 nut. $75.00 plus $12.00 USPS shipping. Beadblasted and primed. PMT via PP or check.
PM or email to DMCGEARSatYAHOOdotCOM.
KIMG2057.JPG

KIMG2056.JPG

For Sale- set of 12 Rim Bolts for the 23 TT rear wheels. New Reproductions.
Rim bolt for Ton Truck rear 23 rims, 7/16 x 20 fine thread.
3-3/8 long from under the head of the bolt.
$50.00 for set of 12 plus 3 original bolts. $15.00 USPS shipping.
See my other ad for the hard to find 2 piece rim clamps for 23 rims.
PM or email to...

Right now on AACA parts for sale are some 14 mm Take apart plugs for sale. Not mine just passing the info.

For Sale- Ford 3Z-501 Flywheel Bolt Wrench. This is the wrench you need to remove or tighten the four flywheel bolts that hold the flywheel to the crankshaft flange. The offset makes getting behind the magnet bolts easy. $30.00 + $12.00 USPS shipping.
PP or check. Please PM or e-mail to DMCGEARSatYAHOOdotCOM. Thanks!

KIMG1980.JPG

KIMG1982.JPG

For Sale- Boyco Can with Screw On lid. Dent on back side looks worse than it is. Appears solid.
$40.00 plus shipping.
PP or check. Please PM or e-mail to DMCGEARSatYAHOOdotCOM. Thanks!
KIMG1974.JPG

KIMG1975.JPG

KIMG1976.JPG

This article appeared in the “Boston Evening Transcript,” describing the cars shown at the recently completed New York Auto Show(s). This was the year the ALAM (Selden Patent) rented the Garden for ALAM cars only, and the Independents secured the 69th St. Armory. This is the show Ford presented the highly anticipated $500 Model N. It’s also where...

Tuning a batch of Kingston High Bridge. This model coil was used in Model T from 1909-1910. There are a few original coils in this batch and the rest are brand new coils. The brass bridge was cast and machined and new wood boxes made.

If you are following the updates to early coil points I have been doing to get them to run more stable, I did...

Tuning a batch of Kingston High Bridge. This model coil was used in Model T from 1909-1910. There are a few original coils in this batch and the rest are brand new coils. The brass bridge was cast and machined and new wood boxes made.

If you are following the updates to early coil points I have been doing to get them to run more stable, I did...

Looking to buy a McCord Oiler for a Model S.

FS: one Rest-O-Lite bracket for an accessory running-board mounted acetylene tank. That's not a typo - this was apparently a knock-off. It's solidly built nevertheless. It will need to be cleaned up, as the wingnut is rusted in place and one of the 'wings' is missing. Asking $50 not including shipping.

resto01.jpg

resto02.jpg

resto03.jpg...

I got this beautiful, intriguing jump seat over 40 years ago and kept it thinking I may use it but my focus is on my T parts inventory that is available. This is only T related if it could be used in a Depot Hack. The hardware is Nickel plated and the fabric says it is late twenties to early thirties. I'm wanting $200 for it. It weighs 11.4 Lbs...

As the title says NOS, $25 + mail. Tie Rod Anti Rattlers.jpg

It has been a while since Dewey Asher has been to any big tours, but he and Pat went on a number of national, international, and Tennessee T tours.

Ron Dupree

FS: Door skin for touring car 1917-1925, left rear. It's rusty and there's pitting and some pinhole rust along the edges, but it could be restored with some effort. $5 not including shipping.

tlrdr01.jpg

tlrdr02.jpg

tlrdr03.jpg

Thanks for looking!

I have a KR Wilson HCCT that has a broken crank handle , looking to see if someone has one available out there before I try to fabricate/repair the one I have , mine has the Pointer but the handle is busted off and missing . ( the way I got it ) thanks in advance.

Looking for an early cylinder head water outlet in good condition for use with a brass radiator. It's the stubby one.

Screenshot 2026-01-24 121043.jpg

I have for sale an early straight left-hand side headlamp fork. Good threads, $65 plus shipping to lower 48. You can reach me through text message or through the forum. My number is 419-217-8884.

Counter weighted cranks and 280 cams will be at the Turlock swap Saturday, space GG59. Cash only

Nice pair of front spindles correct for 1911-1918 with correct straight steering arms. No wear grooves or smashed threads. Could probably use some new bushings.

SOLD! $100 plus shipping in the U.S.

IMG_8965.jpeg

IMG_8966.jpeg

IMG_8967.jpeg

IMG_8968.jpeg

For Sale is a nice hardware kit for a pickup bed or accessory wood body. Rear tailgate hinges are not included but are easily made. SOLD plus shipping Lang’s 1-800-872-7871

See add under cars for sale 1919 PU

2 piece drive shafts DB axle other early brass Era parts at Turlock A's swapmeet Jan. 24/ 25 spaces C 30/32/34 zone 1 call or tex Phillip 209 769-3384.

FS EARLY T PARTS 1912 JB headlamps 2 piece drives DB front axle. and more brass era parts At Turlock CAL. A's swapmeet jan.24/25 . See Phillip in zone 1 spaces C 30/ 32 / 34. Call or tex 209 769 3384

Possibly already posted, but with a heavy heart I bring sad news of another patriarch passing. Gary Cooper, one of the last founders of the Southern Nevada Model T Club. He was instrumental in the restoration of the pie wagon. Screenshot_20260119-062125_YouTube.jpg

Hi…Has anyone ever used one?

For sale: bottom of carb $25 plus postage

20220730_140333.jpg

The following parts were removed from a 1926 Model T Coupe. I am not familiar enough to know if some are correct / or if they fit other years. *The rod from the firewall to the radiator...$10. *Radiator shield trim strip...$5. *Horn bracket from the headlight cross bar...$25. **Sorry, but I can't figure out how to upload pictures. Email me at...

The window garnish are from an enclosed steel cab truck. One(1) piece is from the right door, but with some work could be modified to fit the left door. The other two(2) will fit either door...$45. The running boards and braces may fit any TT chassis...$80. **Sorry, but I can't figure out how to upload pictures. Email me at deszs759@gmail.com...

The window garnish are from an enclosed steel cab truck. One(1) piece is from the right door, but with some work could be modified to fit the left door...$45. The running boards and braces may fit any TT chassis...$80. **Sorry, but I can't figure out how to upload pictures. Email me at deszs759@gmail.com Parts are in Byron, GA.

*The hood fits 1926-27 Model T cars. It is an original part. It was disassembled, sandblasted, cracks welded, straightened, epoxy primed, and reassembled. It will need very little work to put on a car...$300. *The fender fits 1926-27 Model T cars. It is an original right front. It is repairable...$40. *The headlights(2) and reflectors(3) may be...

Tired of messy timer maintenance every 500 Miles? The Surging, jerking, skipping, missing.... Try an Ideal Timer (I-Timer). It's a direct drop in replacement for the stock Model T timber yet completely maintenance Free.

Start on battery and run on Magneto OR battery, the I-Timer is immune to timing cover misalignment and provides reliable coil...

Complete Distributor Conversion is a lot of work to install timing cover and coil, still requires periodic maintenance and periodic replacement of points and cap. The E-Timer, on the other hand, is a simple drop in alternative that also features automatic timing advance but is completely maintenance free, non-contact and never wares out for about...

Ed Larson was kind enough to teach me how an early 2 lever/2 pedal waterpump T shifts at the MTFCA Winter Clinic hosted by McPherson College (KS).

IMG_3232.jpeg

Ed Larson teaches me how to shift his very early T at the MTFCA Winter Clinic in McPherson College, KS. Click on the FB link to see the video:

IMG_3234.jpeg

Located in Kingman, Az. $10,000 OBO

Email for details kingmanjeepers@gmail.com

For Sale arms pictured. The ones marked $40 look good. The ones marked $30 need repair around tie rod hole. Steve 701 212 5009.

Wire and disc wheel lock ring for non-Ford wheels, 19 rim size. nice ring not bent or rusty, suitable for plating. $99, packaging included, 48 state shipping $20. Contact me thru MTFCA messaging. I also have for sale one 18 , same price.
Measurements in pictures are inside and outside diameters.
Happy to answer any questions.

F1 Drivers Race 100 Years Of Cars

This shift-lock assembly is in excellent condition with minimal wear in the shift arm and body. The plunger and spring are new. It should work just fine as it is. This isn't the same one I advertised a couple weeks ago. I'd like $250 for it. Please contact me through the forum email system if you are interested. Thanks.
Bryan Ostergren
Ruckstell...

Looking for this seat bracket for the passenger side of a 24/25 coupe let me know if you have anything that looks like this thanks.

On frozen Lake St. Clair 121 years ago Henry Ford destroyed the world one mile record. He became the first American driving an American made machine to hold the record.

For sale Marquette Mfg Co. clincher tire tool. Tire tool for removing and installing clincher tires. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

For Sale is a Starter Bendex Head Puller. Marked with a Ford Script and 5Z-323. SOLD plus shipping. Lang’s 1-800-872-7871

SOLD Stevens spindle bushing re-facer. Thanks, Walt

(SOLD) Stevens drive shaft sleeve puller. Thanks, Walt

(SOLD) Stevens piston vise. Thanks, Walt

(SOLD) Stevens generator gear puller. Thanks, Walt

These are machined from 6061 aluminum and fit the back nut on an aluminum Warford transmission. $60.00 shipped!

You can DM me to purchase or get one at rawaequipped.com

IMG_2719.jpeg IMG_2718.jpeg IMG_2721.jpeg

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

WTD looking for used ,top for 1913 touring car. i have a real nice car very original car i have a new top but id like a good used one that i can fit to the car, if i put the new one on it might ,not, look right .

No dents original Ford script oil can and holder. Real nice condition. You won't find a better one. Price drop $125.00 plus shipping.

Ed aka #4

Lamps. The one on the right (with magnet) has unusual steel top but otherwise complete with brass top font and burner. No cracks in glass or brass. The other, left side 110, has a dent in black painted top of chimney and back panel. This one has no burner an no cracks in glass or brass Best offer over $200 + shipping until 25 January....

Very good condition, hoping someone can use it.
See pictures 250.00 make offer.

Original steel-tank Model T radiator. Removed years ago and stored indoors. Not a reproduction.
- correct black-era for 1917-1923 Model T (including pickup)
- Original steel top and bottom tanks
-Vertical tube core (appears original/early core, not modern)
-Holds water but has small leak (likely seam or tube)
-No freeze crackes noted
-Excellent...

With or without the distributor is ok but I would like one with the toggle & levers. I'm looking for the type with the distributor on the front, not the magneto on the side.

Located in CA but happy to pay shipping.

Price isn't too bad and everything looks to be somewhat sorted and isn't and overwhelming horde of rust junk from what can be seen in the photos . $700 buy it now. No connection.

For you speedster guys. Complete schebler carburetor, Its very clean and complete,
It was part of package deal 100.00----- 20.00 shipping see pictures for more details. 561 262. 0393

I would like to purchase an Okeh brand Model T commutator (timer).
Please contact me through the forum email.
Thanks, Jim

I have this Atwater-Kent model LA distributor that I have made no attempt to clean or restore. It is in very good unrestored condition. It has the driven gear for the camshaft but is missing the the spacer for behind the gear (on the camshaft) and the dust cover plug which is on the bottom of the distributor body.
The body shows no signs of...

I have five BETHLEHEM Spark plugs one has a rounded hex, the other four should clean up very nicely for additions to you Spark plug collection, or to use in your Model T. They are marked in capital letters as such:
BETHLEHEM
MADE IN
U.S.A.
775
The price is $66.00 (Shipping included)

I need one of the buckles that mounts on the body to secure the mother-in-law seat. A strap passes through this buckle. I have the straps and one buckle, jusr need another buckle. I tried the pre t forum and thought I would try here