MTFCA Forum

Got em all. Premium quality rebuilds. I make literally everything that goes into these rebuilds.

Avoid the spring rush when everyone unboxes their cars from winter and finds problems. I get slammed in April & May.

All my starters & generators have a FIVE (5) YEAR WARRANTY.

Jeff

Warner Lenz 9 Pair
I have 1 pair of Warner Lenz for sale. These are 9 diameter. Great for a Speedster or TROG or collectors piece.
$100 plus shipping

mikebird@lifeattheridge.net

IMG_4812.jpeg

Want to buy two six inch reflector mirrors for brass headlamps. I keep missing the ones that have come up for sale so I thought I would try this. Thanks, Art

Alco No.12 NOS headlamp burner marked 3/4
$50 including shipping
Thanks for looking!

Mixed in with some Model T parts was some instructions in 6 or 8 pieces. I put them together to figure out what it was. Not too earth shattering, but I guess improved inner grease seals for rear axle. Interesting how strongly it mentioned not to over grease.
IMG_7791.jpeg
IMG_7792.jpeg
IMG_7793.jpeg
If anyone has more information or how old...

1903 patient date $50 including shipping
Enjoy Your Day!

This pair of brass headlamps measures about 9 1/2 diameter, 8 length and has 7 1/2 between fork holes. No markings. Original and unrestored with some small brass cracks. Take a look at the photos. Reasonably priced at 195.00 includes shipping via FedEx Ground in the USA. I don't answer messages here so call me at 734-730-4274 or email me directly...

15 side and tail light lenses, $75.00
Lots of side and tail light parts all for $75.00 all plus shipping. kdmks AT att.net.

Rear window frame touring/roadster, no glass, light rust, nothing pitted, all fasteners. 18.5” x 7.25” $25..3 original block off plates $30. Accy rear pan mounts $30. TT enclosed cab rear window frame powder coated $20.
NOS touring/roadster rear ‘lights’ frames with glass, no fasteners - replaces discolored isinglass - have 2 sets of 2 only $35 @...

Saw this in the auction preview photos. Looks like an early Autokamp trailer or something similar. Will be on the Pre 30 sale at the end of April.

IMG_0971.jpeg

Porcelain plate. Nice colors. $100 plus shipping
mikebird@lifeattheridge.net

Thanks!

IMG_4805.jpeg

One complete set for the spark plug wires and mag post. Brown cloth wire with copper ends.
$15 plus shipping

mikebird@lifeattheridge.net

IMG_4804.jpeg

I have two (2) sets of the 1911-Mid 12 terminals for the Heinze coil boxes. These are new and were made by RV Anderson.
$75 per set plus shipping
mikebird@lifeattheridge.net

Thanks!

IMG_4803.jpeg
IMG_4802.jpeg

FS: Generator armature core, well used. Asking $10 not including shipping.

I also have a starter armature that someone pressed the shaft out of - maybe the commutator or something can be salvaged. Free if you pay shipping.

tgarm01.jpg

tarma01.jpg

Thanks for looking!

FS: 3 pcs. connecting rods for cores. These are the later light style rods. The babbitt bearings are shot, of course. $10 each not including shipping.

I also have several connecting rod bearing caps, cores only. $2 each not including shipping.

tcnrd01.jpg

tcrcap01.jpg

Thanks for looking!

FS: Rebuildable Holley NH, missing float bowl and drain petcock, looks rebuildable otherwise. Asking $35 not including shipping.

tnh01.jpg

tnh02.jpg

tnh03.jpg

tnh04.jpg

Thanks for looking!

From John Biggs:
“Blockley Tyres has now released their 28 x 3 Tyres - I am going to fit them to my cars as they have a great reputation for their Model T tires, according to the MTFCA Forum.”

John included this Blockley link:

My 2 cents; I have Blockleys on one of my cars and they appear to be a well made quality tire. The inner tubes are the...

Just Sharing a Craigslist posting, I have nothing to do with the posting, car, nor the person posting it.
more photos are on the Craigslist posting.

TOURINGcarsAREtheBEST T 1924 Chesapeake.jpg

For attendee planning purposes and letting Vendors know in advance:

Annual SWAP MEET, Sunday November 1st, 2026 . 8am – 1pm, Miami County Fairgrounds Duke-Lungard Building, Troy, OH. 17 miles north of I-75 from I-70. Exit 78—go 3 miles south on Co Rd 25A to the Fairgrounds. Sponsored by the Dayton-Buckeye Model A Ford Club. All Makes, Models and...

Ford model F parts carbs 50 takes the pair shipped

Bunch of main bearing caps all for $30. Bunch of main bearing bolts all for $25. All plus shipping kdmks AT att.net.

4 sale 1915 to 1925 license plate brackets 40$ plus the ride ea if you know why the one is curvy I'd love to know im sure there's a reason

Unpolished cast aluminum. Vendors no longer carry the traditional finned style. Full disclosure, it was made from a cast running board step plate. $135 and that includes shipping in the CONUS.
32393BF8-8C7E-4F4D-9C23-71A405CF2E3A_1_201_a.jpeg
C5CA4CEE-3D6A-4B3B-A7FB-D00852BDB039_1_201_a.jpeg
0AC802F5-F1B3-432C-9586-116258F23038_1_201_a.jpeg

Has anyone ever seen one? Or own one? Have one for sale even?

This is the last in this series, and is perhaps the most unique in overall design having a folded center support wall, vs. the traditional vertical. The six center holes are spade-shaped vs. oval or circular. The lugs are formed from semi circular designs rather than the previous curved step outs.

T_725_B3 clutch drum preview_1.jpg...

For Sale are a pair of Bill Bohlan’s Laurel Style Front Lowering Brackets. They are no longer being made.
$250.00 plus shipping Lang’s 1-800-872-7871

An original round gas tank. This was stored in dry storage in an attic in the 1960's Very nice no rust out or pin holes. This has the off center drain so it's not an early 12. It had a brass sediment bulb so definitely 12-15, but can be used all the way up to 1920.

$200 plus shipping.
I can ship this very reasonably. I just shipped a 1910 tank...

1915/16 Model T Roadster Front Seat Cushion NEW
This is a new, never installed front seat cushion for a 1915/16 Model T Roadster. The material is vinyl. $450 plus shipping. Any questions feel free to send me a msg. Thanks!

IMG_4769.jpeg
IMG_4770.jpeg

Looking at the 26-27 roadster body that just came up in the classifieds,
but
it is in Chippewa Falls, WI and I am in Atascadero, CA (central CA coast 93422),

Any chance someone would be able to transport or know of someone making the trip out west?

This is my dream T since I was a kid hanging out in my grandpa's shop,
I have seen others over the...

Here is the 3rd major version of the Model T/TT transmission Clutch Drum. Noticeably thicker around perimeter, with only 2 holes, vs. the previous 6. While researching this drum, I have found photos showing the Ford script to be on the front side as well as the back side.

T_725_B2 clutch drum preview_1.jpg

This is first drum used in...

IMG_4808.jpeg IMG_4809.jpeg

Need a Jon Brown carbide generator. IMG_5341.jpeg

And a pair of Rands windshield hinges. IMG_5346.jpeg

For sale is a reproduction Monocle Windshield Frame with steering column mounting bracket. These castings have had minimal machining of the mounting holes, and could be polished if desired. $95.00 plus shipping. Lang’s 1-800-872-7871

Torpedo front view.png

Set of flywheels magnets. They have some very light surface rust. Good for cores. Will need to be remagnetized. Never hurts to have a spare set on hand.

$25 plus shipping in the U.S.

IMG_9348.jpeg

IMG_9347.jpeg

Brass Ford script. Measures about 7.5”x3.5”. Could use a good polishing.

$20 plus shipping in the U.S.

IMG_9350.jpeg

To continue along with this series, here is the 2nd major series, the T-725-B.1 (first B version). This one has the 6 holes around perimeter, and the first to use the set-screw. The front thrust face is designed to be used in conjunction with T-769 (top hat) bronze bushing. The set-screw to thrust face is the noted .530 - .533 . Nothing on parts...

Hello everyone,

As some of you have already heard, I committed to obtaining several key Model T parts drawings from Benson Ford Archives. The purpose is for my ongoing 3D and schematic drawings to use a an educational tool for both here on the forum and for collectors.

A lot of the problem in rebuilding the transmission seems to be...

Thought this would be of interest. Says it can be construction from the diagram. Safe to assume assume that the 1 x 2 lumber is exactly 1 x2 back in the day

Early style front engine mount used from 1909 to about 1921. Nice condition, u bolts are in great shape with excellent threads. Can be hard to find these u bolts that have good threads.

$50 plus shipping in the U.S.

IMG_9268.jpeg

IMG_9269.jpeg

IMG_9270.jpeg

Wire wheel rear hub. Has some pitting, but the taper and keyway looks to be ok.

SOLD! $50 plus shipping in the U.S.

IMG_9264.jpeg

IMG_9265.jpeg

IMG_9266.jpeg

I am working on the chassis that I pulled out the the ground/weeds at my late friend's house have am nearly ready to finally start the engine after quite a bit of work getting it unstuck and cleaned up inside and out. It still looks pretty ugly and rusty which I kind of like and I was fixing to order plug wires and a timer wiring harness but...

Looking for a burner base/stand and gas elbow/supply like the one in the picture.
Thanks!

Screenshot 2026-03-05 at 9.43.07 PM.png
s-l1600-2.jpg

20241028_161152.jpg
For sale: Rayfield carb and intake manifold $250 plus postage
20241028_161120.jpg 20241028_161051.jpg 20241028_161120.jpg

Free: Three rusty side and tail lamp bodies. One tail lamp is pretty beat up, the other is just plain rusty. The side light body has a lot of surface rust but you might actually be able to bring it back. They're free just pay shipping. I would prefer to get rid of all of them at once.

ttlb03.jpg

ttlb02.jpg

ttlb01.jpg

Thanks for looking!

last year there were a good selection of Model T and Model T era autos and projects at the Duncan swapmeet ... will probably be a good selection of interesting cars and parts again this year ... this is the best way to see and purchase a vintage vehicle ... inperson and able to do a close ,detailed inspection and possibly drive a vehicle ... hope...

For sale: new spark plug wire brackets $12 plus postage

Nice working clean rim spreader.
$60 plus shipping

Happing Motoring.

rim spreader.jpg

WANT TO BUY

... LEFT & RIGHT REAR COMMERCIAL FENDERS TO SUIT HACK OR C-cab. ...Re-pop preferred

.....im From Australia & visiting US in May .. possible pick up ??

For Sale is an original 1911-12 solid brass Steering Wheel Spider with reproduction wood rim. SOLD plus shipping. Lang’s 1-800-872-7871

For Sale is a used Spindle Arm for use with a speedometer setup 1912-16. In good condition with some pitting as seen in the photos. SOLD Lang’s 1-800-872-7871

For Sale is a Rear Wheel Puller in excellent condition, maybe NOS. $45.00 plus shipping Lang’s 1-800-872-7871

Want 1920s 30s pre-WW2 era camping gear or any related items. I'm in the North building. Look for the 2021 Tacoma with a rooftop tent. We camp on the spaces. We are there the whole swap meet. Anything related to Motor Camping including literature and all the little goodies ...

or send a message to the info in the photo before the swap meet. My...

A pair of Bale handles for the center door T's
$150 plus shipping.
Thanks!

IMG_4715.jpg
IMG_4714.jpg

mikebird@lifeattheridge.net

I want to buy two pair of accessory taillight brackets that attach to the top saddle arms of any Touring car or roadster
and allows you to use the electric tail lamps. Please contact me here.
Eric Gould
Monroeville, AL

Is anyone familiar with someone who may have reproduced the strike plates for the 1910 locking door latch?
Thank you!

Anyone here know what the rings look like that hold in the glass in on the door of a Rushmore search light looks like. Also how is the mirror in the back of the light held in? Pictures would be very helpful. Thanks!

For E-Timer users...

They never worry about coil point or capacitor availability, maintenance or replacement.
They just enjoy superior engine performance, zero maintenance and excellent reliability.

Please Visit: www.modeltetimer.com for more information about the E-Timer, simple drop in installation or to place an order.

E-Timer P3 Board...

85.00 plus shipping. ctleonard64@gmail.com IMG_20260302_082417286.jpg kk IMG_20260302_082404342.jpg

For sale: assortment of bolts $25 plus small flat rate box

20260203_161314.jpg

I'm looking for an EZ Power Unit for my Model T Shaw Tractor conversion. Let me know if you have one for sale please. Just send me an email. Thanks!

Alex, Baltimore Maryland

For sale: 2 Stevens knock out pullers and one unknow $40 plus postage
T 153D - 1 T 153A - 5/8 no name 1

20260222_163536.jpg 20260222_163607.jpg

delete this ad

Sold!! A really nice brass Buffalo right hand knock off cap. Missing the latch. Excellent threads, hex and Buffalo stamping. Very nice condition. It hasn't been hit multiple times with a hammer. Price is 225.00 including shipping via FedEx Ground in the USA. I do not check messages here but call me at 734-730-4274 or email directly at...

For Sale is a rebuilt Holley G Carburetor with a brass bowl. $275.00 plus shipping. Lang’s. 1-800-872-7871

Original, hard to find KR Wilson Steering Wheel puller. It’s a little big for a Model T wheel. Works great for Model A through 1940 Fords and other early cars that don’t have threaded holes that allow the use of a conventional style steering wheel puller.

Pretty sure the bolt has been replaced at some point, but it has the rubber cushion which...

Pat’d Dec 22, 1914 Holley, completely disassembled and cleaned, new float, float valve, venturi and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

An assortment of front radius rod parts NOS. Includes three late style tie rod yokes that accept the tapered ball (19-27). One tie rod yoke left side (13-19) and one straight shank ball (18-19). Price for all $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20260225_122302.jpg

Great hood for a survivor car. 100.00 plus shipping. ctleonard64@gmail.com IMG_20260225_114944283.jpg IMG_20260225_115018624.jpg IMG_20260225_114948433.jpg

One complete set of L style Ford shackles. Although used, they are still in pretty good condition. New nuts also included. Price is $60.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20260224_141029.jpg

One set of early figure eight rear shackles in used condition. These still appear to have some life left in them. Much cheaper that a new set. Price is $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20260224_141816.jpg

Anyone have a photo how the cables/rods are hooked up? The Lockwood's I have just have a hook at the end of the lever. Did they use a cable with a loop or longer clevis that was allowed to slide in the slot?
Go down to Dan's post on Tuesday, September 29, 2015 - 08:06 pm:

lockwood.jpeg

This is used to keep the reamer aligned when reaming the valve stems in a Model T block ( also for push rods for accessory overhead valve heads).
Asking $150 ( lots of work went into making this).
Contact me thru MTFCA message system email.

For sale Warford coupler. Coupler is used on the cast iron Warford transmissions (super six). If a standard Ford U-joint slides on the input shaft, you'll need a coupler to bolt up to the Model T transmission. Price $200 plus shipping. E-mail, call or text, (248) 894-75fiveone. Thanks, Walt

Just 14 days until the Marietta, Ohio old car swap meet. Lots of T and A parts. Nice heated building, with lunch being served. Doors open at 7:00. Just $5.00 admission. Come join the fun, see old friends and make some new ones too. Several hotels close by. Plenty of free parking. These folks do a great job of putting this event on every year on...

Just need 4 of the same manufacture. Don't care of brand. These are for a display chassis. Model t size. if someone has a set of cast unfinished hub nuts will do as well.

thnx
frontyboy contact me thru this site

Please send me an email if you have a set of Maryland 1921 plates. I can trade you these 1926 Maryland plates with original paint. They were used as shims in kitchen cabinets for Lord knows how long….

Thanks,

Alex
BaltimoreTMan

Wood hood cleats for '13-14 .prefer new or really good condition
contact me thru here.
Thnx,
frontyboy

Hi, posting for a friend. I'm missing a Right side Buffalo wheel nut. Has somebody got one that they're willing to sell. Help!

Ed aka #4

Older restoration resest motor trans rebuild new woodwheels an tires metal stem tubes new flat tube rad. Rocky MT brakes an Rocky MT 6 speed aux trans original leather upholstery good top in central CA. $18.000 Info / pix call / tex 209 769 3384 Phillip.

My Ford historian friend, Mike, suggested that the EFR folks might enjoy this letter. Most likely, some or most, of this is already known, but nonetheless, still interesting. Of course, it rotates when you click on it. Sorry.

Firsts.jpg

For Sale: One electric side light. Vintage accessary item for the T.

$75 plus shipping.

Ford Tough….

IMG_3951.jpeg

For Sale is a Model A Cylinder Head Removing Tool. SOLD plus shipping Lang’s 1-800-872-7871

For Sale are a pair of 1909-11 Touring rear door latches. They have been glass beaded and are in good condition. $250.00 plus shipping Lang’s 1-800-872-7871

1917 Model T Sold
runs & looks great, lots of new parts, no rust, located in Kingman, Az.
for details & photos email me at kingmanjeepers@gmail.com

Here one for you doers out there ruckstell housing had been made into a tractor rear end need new axle tube housing is nice 300$ plus the ride

I did not buy this originally or ever use it, so the condition is unknown. It does not appear to be abused or damaged, but even so sold as For Parts Only . $45 and that includes shipping in the CONUS.

Last Chance!
for those wanting an engine rebuilt for this years touring season. We have just enough time to do one more engine and get it back to you before we leave. I’m planning a 5,000 mile trip to AZ and back for the entire month of June. The trip will be filmed and posted to youtube, potential filmed destinations include the AACA museum in...

For sale: Bracket $25 plus postage

20220628_065848.jpg

Clutch appears to be defective. Sorry for not checking sooner

For Sale Dodge Bros. spare tire carrier with four lug nuts. 3-7/8 inches between studs. Will need re-drilling for speedster. Price $275 plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale: a 1914 original manual.

$112 a dollar per year since printed plus USPS mail.

Available again is Part # 3004B 1917-1925 water outlet made from high strength cast steel. $49.95 plus shipping. Lang’s 1-800-872-7871

For sale 15-1/4 inch OD steering wheel. Steering wheel is marked Dodge Bros. twice, around each keyway. Price $250. plus shipping. Email, call, or text (248) 894-75fiveone. Thanks, Walt

For Sale brass 15-inch OD steering wheel with new brass nut. Single keyway repro. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Completely disassembled and cleaned, new float, float valve, venturi, and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed and test run. $235 postpaid to continental USA email: wlkma9@gmail.com

Just as stated. A single 1926 Michigan license plate that is original unrestored. $50 and $10 shipping. Email me at markpaulagember AT aol DOT com

Great condition original single brass tube Ford script tire pump. (1920-27) Rebuilt by Vern Cambell several years ago. $150 and $25 shipping. Email me at markpaulagember AT aol dot com

Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED. Dealers are asking $36.95 + the ride
ENJOY YOUR DAY!