MTFCA Forum

Dayton wire wheels. 30x3 1/2 Pin drive. Excellent condition.
These have been respoked using new nipples. Rims are very good. These come with s full set of hubs and caps. 5 wheels and 4 hubs. $5000. Can deliver to mtfca homecoming or pick up in northwest Ohio. If interested contact me through the forum. Jack Putnam

One early fan hub for the riveted blade fan blades. Includes the correct rear grease cup. The crown where the belt rides is in excellent condition. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_133128.jpg

20250515_133143.jpg

Spare wire wheel bracket for the rear of the car (26/27 Wire Wheel). One small split on one side. Easy repair. Price is $100 plus domestic shipping. Mark Chaffin (951) 805-0928

20250515_132001.jpg

20250515_132018.jpg

20250515_132037.jpg

An assortment of used Model T spark plugs. Clean them up and go! Price for the entire lot is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_120107.jpg

One complete set of used front shackles in good overall condition. Includes new bushings, nuts and cotter pins. Price is $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_122051.jpg

Taillight assembly for the improved car (26-27) with fender mounting bracket. This one appears to be in very good condition. No longer available from the dealer. Price is $100 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_113414.jpg

20250515_113426.jpg

For sale : Atwater-Kent model LA distributor complete with cap, rotor used point set and drive gears ... distributor is centrifugal advance and uses a separate conventional automotive ignition coil ...price is $150 plus $19.15 postage in lower 48 states ...actual postage outside this area or INTERNATIONAL ...Gene French 970-581-2808 or...

Just a reminder that today is the deadline for Early Bird registration for the Homecoming Swap Meet spaces.

After today, the price goes up so call us before 5:00 (EST) to reserve your spots. You don't want to miss the event!

Manifold clamp and bolt set (25-27). Includes new studs and nuts. Price is $30.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_103229.jpg

A gaggle of grease cups. Price for the lot is $20.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_100827.jpg

There have been a couple of request for Roof 16 Valve B & BB Competition Exhaust Manifold. I don't have a price yet from the foundry but have contacted them and they will cast them. I'm hoping the cost will come in under $600 a pair machined. If you are interested or have questions, please contact me. Once a price is established and we are ready...

Nice spare tire mount corner of the flage is bent and could probably use studs. I also have the Y forks avaliable if you have wood wheels spare carrier 70$ plus the ride

I am looking for one of these (or two of the earlier style). If you have something for sale I would be very interested!

Thanks Scott

2025-05-14 19.47.44.jpg

Here’s your opportunity to purchase unique display items. I’m selling a 1925 auto insurance policy issued to a school teacher employed in Storm Lake, Iowa for her 1923 Ford Coupe. The cost of her Model T is listed on the face of the policy as well as the engine number, premium price and peril coverage. Very good condition.

Price: $50.00 +...

I'm going to take a shot at this. I've attached a scan of a 1926 Michelin tire price chart that I found stuck between pages in ledger from my great-grandfather's store. Hopefully you will be able to download it and print a copy if you wish. It makes a nice wall hanger for the shop. Enjoy !

Picked this up a recent estate sale. One 10 Tooth pinion with Ford script. Looks to be in very good condition. Price is $75.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250514_141046.jpg

Wanted to invite everyone to a great car show this Sunday from noon to 5 p.m. in downtown Warsaw Indiana. The show is a well attended charity show put on by the Optomist Club and they are specifically spotlighting
Early cars and Model T Fords. I'm a model T owner and am working the show so feel free to call or text me if are interested in...

Good evening all,

Looking to buy a set of restorable 1914 headlights preferably E&J but will accept the other brands.

I have good mirrors to start with.

Gerry - 510-332-9588

I am looking for a good coil box lid for my 1922 . Let me know what you have and and want for it.

Model T Roadster Pickup with 1924 Engine

1924 Engine, 1925 Pickup Box, 1926 Rear End

Rebuilt mechanically from front to back. New rubber. Crank start.

Includes engine stand, Model T tool set and misc. parts and tools.

$12,000.00, Contact John @ 320-582-1737, Hutchinson, MN

mtfca1.jpg

mtfca2.jpg

20250507_104403.jpg

mtfca4.jpg...

I have 3 or 4 sets of detachable ear bands to sell. $100 per set of 3 shipped to you. Some are Ford some have different looking ends. If you need a non Ford band send me a photo of what you need. I could sell singles of the non-Fords as long as it doesnt break up a set. Thanks

Making room for bigger and better toys! Powermatic 14” bandsaw. Ran when parked about 8 years ago. Always stored inside. Needs blade and probably tires. You guessed it, no shipping this baby! $300 pick up here is Sacramento, CA

IMG_3064.jpeg

This is a new reproduction KW box and switch along with the parts lot you see. I purchased all of this from the vendors a bunch of years ago for a project I never got to. All the other small parts you will need to complete the box are available though the Model T parts vendors. Just he wood box and switch lists for $440. I am asking $275 for what...

I am looking for a wishbone for the front axle, the one that has a stud to go through the perch with s good ball and threads since mine has bad threads and a bad ball.

Thanks.

Here's a handy device that adds a stand pipe in the gas tank so when you run out of gas you pull the string and tie it off to get to the last of the gas in the tank.The one gallon of gas remaining below the stand pipe will get you on your way to a filling station. Asking $70 plus postage.PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT...

Its almost here. Time to get ready for the Mother Lode Model T Club 50th Annual Swapmeet, Auburn California. June 1. No reservations needed. We have plenty of space. Early set-up on Saturday, May 31.

The Automotive Trade Directory Oct. 1919- Volume XVII- No. 4. Over 1,000 pages of interesting bathroom reading material! Binding is loose, some pages discolored, the color inserts appear to be all there but some are loose from the binding. Positive there is NO basement smell! $45 includes shipping in the CONUS...

TT Rear Axle Brake Drum. Appears to be in excellent condition. I measured the ID in three places with a digital caliper and it appears to be standard ID.
$40 plus shipping. Will not fit in USPS flat rate box. Provide zip code for shipping cost.

Please email through the forum.

NO PM's Please

Thank you,
Terry

TT Rear Drum 2.jpg

I have had a change in direction and my Model T tool collection needs to be moved on.

KRW Pan Jig and tooling
KRW Combination Machine and all tooling etc
First option on smaller tools, KRW, Stevens etc will be offered to the purchaser of the big items. Don’t ask about the smalls, unless you’ve taken the big rigs. :P

Seems to be no serious...

FS: One Kingston 4-Ball carburetor body only, the butterflys, balls, float bowl, etc. are all gone, just the body is here. The brass looks good, no cracks or major damage. It looks like a good start for a rebuild, but you don't know until you start digging into it. Asking $40 not including shipping.

kng401.jpg

kng402.jpg

The patternmakers...

Tie rod yolk for 13-18. Very nice. Clean threads. Possibly NOS. $25 plus shipping
mikebird@lifeattheridge.net

IMG_3315.jpeg IMG_3314.jpeg

This a reproduction of the early style water head outlet 09-16
$50 plus shipping

mikebird@lifeattheridge.net

IMG_3311.jpeg IMG_3310.jpeg

Rolling chassis

1925 engine - runs!

Good 26/27 rear axle

Good front fenders and running boards

$1500 OBO

I have many more parts available, call:
541-two-four-7-seven-six-54

Located on the southern Oregon coast

Rolling chassis

1926 engine - runs!

4ea NEW Universal 30x3-1/2 tires and tubes, mounted on good rims

Model A bed

Has many other good usable parts

$2500 OBO with tires
$2000 OBO w/o tires

I have many more parts available, call for details:
541-two-four-7-seven-654

Located on the southern Oregon coast

Decent pair of 15 16 only head light buckets 100$ shipped lower 48 these are a hard find

Car is in need of interior, Tires, tubes, top material and paint. Have all top iron sockets and new wood. New wiring and switch parts. Sheet metal is in good condition with no rust, engine runs and car drives comes with clean Colorado title. Pictures to you text or email. this is an excellent car for restoration. Jim nine7zero3seven388six4.

I am looking for a pair of hip panel retention trim pieces for a 26/27 roadster. I have attached photos of these parts I found on the forum for reference.

Thanks!

Jon Levine

IMG_7489.jpeg IMG_7354.jpeg

Since Ben was under the weather , I went through some of my better key switches - I have a few originals available & 1 repro - a couple have good ammeters & new, best quality backs.

I can post a few photos tomorrow. Drop me a note through the Forum unless you already have my email.

Is the top axle lock for TT?
The lower one is for a T.
Thanks Dan
IMG_4352.jpeg

I have a Phinney-Walker Rim Wind clock that is very accurate twice a day ...however, I would like for it to be accurate at other times too. Who repairs these that can clean and repair mine??

Free delivery of parts orders to Luray Va Swap Meet need to by made by this coming Tuesday May 6th (5 pm)
Lang’s 1-800-872-7871

I have the rear axle from a 1926 TT that has the Bennett mountain brakes. I am missing the special brake pedal and linkage arm as well as the connecting rods. If anyone has any of the parts that I'm missing, please contact me so the setup can be complete. I also have the front axle, the Warford transmission, gas tank and steering column. Asking...

For sale leaf spring spreaders and lubricators. Left one is made by Tomahawk Mfg Co PAT. OCT. 17 16. Right one made by Charles W. Manzel Co.. Price $80 each plus shipping. Take the weight of the vehicle off the springs, tap the tool in between the individual leaves. Twist the handle to force graphite grease between the leaves (grease not...

For sale Ford dealer key board. This is a maple WOOD COPY of the key board used at ford dealers. Letters were engraved with a Dremel and filled in with white paint. Holds ignition keys number 51 to 74. Not perfect but nice for display. Price $300 plus shipping. Email, text or call (248) 894-75fiveone. Thanks Walt

I’m working through a front end issue and don’t want to out new tires in the process so hoping I could find a decent Universal T driver 3 1/2 x 30.

Thanks

David

As mentioned in the subject, I'm selling an assortment of very nice sheet metal that was purchased for a 1920 roadster project that never materialized. All of it is very much above average. There are a few photos below. Email or PM me through my profile with your email address and I'll send you a link to an album where you can see all the photos...

Luray delivery available.

These were takeoffs from a 1920 roadster project when they were replaced with a set of wheels correct for the year. Removed from a roadworthy car in the 1980's and in garaged storage most of the car's life (one-family ownership for over 90 years and put on about the 1940's). They'd look great on an unrestored driver....

For Sale: 1915 Ford T Touring. Clear title. Newer rebuilt engine with starter. 12 V system for driving lights and directional. High compression head, Ruxtell two-speed. Many more extras. Original rebuilt engine included. Asking $15,000. Located in coastal MA.

Replica 1916 Ford English Omnibus. Left hand drive. Clear title. Home built in 1970s on restored 1924 Model T chassis. Has been driven 45-50 K miles on several national, regional and local tours. Located in coastal MA. Asking $15,000.

For sale: timing gear side cover $25 plus shipping
20240619_072255.jpg 20240619_072309.jpg

This regulator fits all 6 diameter tanks. $95 including 48 state shipping.

For sale 2 (two) front fenders by Rootlieb, 1914 front fenders, never been installed, have been prepped and primed. Will have them at Luray, VA. swap meet for pick up. $850.00 firm.

For sale: transmission clutch yolk collar (sliding collar) 1909 to 1927 $20 plus postage

20250502_173803.jpg 20250502_115515.jpg

For sale: front fender brace (bracket) for 26/27 $20 plus shipping
20250325_182315.jpg

For sale: water outlet for 17/25 $15 plus postage
20250324_171742.jpg 20250324_171753.jpg

I'm Wanting to know, If any members of the local T clubs of Colorado have info on the Pre war swap meet, held in the past few years around early June. Please if you have a date or if it's not taking place this year Please post. Thanks all...Mike

For sale: Fan bracket for 1917 thru 1925 $20 plus shipping
20240629_124013.jpg

For sale:spare tire clamp $10 plus postage
20240615_121152.jpg

ll'l be at Luray with restored model T, model A and flathead V8 generators. The model T generators have tested and serviced armatures, new field coils, brushes, wiring, insulators, paint, sealed bearings and hardware. They are complete with refurbushed original Ford cutout, cover band and gear pinned and peened in place. Bench tested and ready to...

Does anyone know of any upcoming Model T sweepstakes/raffles?

Like a Phoenix, a Centerdoor is in the process of being reborn. Mind you, this is just the floor.

I have a 1916 coupelet. I am interested in buying a genuine1916 centerdoor sedan. I would prefer an older restoration, still nice and good running. I am not interested in buying a 1920 sedan with a brass radiator and earlier fenders on it. Please let me know if you have one available. Scammers need not respond. I would come out to you and check...

Without measuring much can anyone say if a 24 roadster is roomier than a 22?

I have bought a pair if front fenders from Don Lang. He will bring them to Luray. I need a ride for them back to Missouri or close. Thanks.
Mike Russell
Columbia Missouri
573 864 6539
ml.russell1936@gmail.com

Selling more stuff for my friend! Ain't gonna lie, this poor old fan has seen better days! Later style with the oil filler screw. Someone I bet can resurrect this old beast! The hub is good..very little shaft play as is but a great rebuild candidate. Lets get her back out there for $15 plus the ride...that'll probly be around the same amount...

Removed it from one of my cars last fall. Dropped the cap and it cracked and broke and I still can’t figure out where I put the rotor and cover. It does have timer rod with it $200 plus shipping best way to reach me is emailing through the forum. Pending payment Ben

We are looking to sell the 14 Touring, 26 Roadster, 27 Roadster. The 27 comes with a enclosed trailer. This car was driven in the last two years.

The 1914 Brass was once owned by James Kenealy (author of the accessories books). Was purchased the car directly from Mr. Kenealy and had it shipped down here to Texas. In transit the shippers...

Nice shape just a little cleaning or paint and it'd be new.
$10 plus the ride or can be delivered with Joe to Luray.
Prefer PayPal or leave him check or cash. Selling for a friend.
Email me thru my profile. Tks.

I am considering buying a T chassis from someone in Chula Vista, CA. I was wondering if there is anyone traveling up to the Bakersfield Swap meet that would be willing to help transport a Model T chassis. If so, we can discuss what would make it worth it for you. I still trying to work details out with seller.

Matthew

This is a brand new in the original box unit ready to mount on your car. It has a built in flip top oiler for easy periodic oiling. Asking $50 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! Tiger Timer 1.jpg Tiger Timer 2.jpg Tiger Timer box 1.jpg Tiger Timer box 2.jpg

For sale Tucker spoke jack with five shims. Tool measures 8-3/4 inch fully extended and 5-1/2 inch retracted. Good threads. PAT. 5-10-24. Price $80 plus shipping. Email, text or call (248) 894-75fiveone. Thanks, Walt

(Sold) Marquette Tire Tool for Clincher Tires. Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

This is a collection of four Magnetos For Sale on Magneto Monday. Look at the pictures closely. $200.00 each plus shipping but for Magneto Monday the first magneto to be purchased will sell for $100.00 plus shipping. Come get these while they last

Thank you for your interest.

R/S,
Jonathan Bodine
406 498 3946

I was breaking down an early transmission/flywheel assembly and got a little surprise.
One of the magnets came off in two pieces!
It looks like it's an original assembly as indicated by what appears to be the original lock wire.
There was no indication the magnet was broken.

Yup - They're out there.
 
Magnet.JPG

Are you bringing any of this type tire to the Homecoming, Richmond, IN?

If so, let me know so I can plan to come.

Thank you.

Bill Everett

Model T Whitewall Tire 30X3.jpeg

I was down in one of my buildings getting stuff for Luray and saw a 1912 complete transmission I have been keeping.
It is dated June 1912. (See picture).
Everything visible is marked DB. Even the dated main shaft if I remember correctly, it is on bottom and I don’t want to move it.
If anyone is interested I can bring it to Luray, but will not...

Anyone interested in a nice little lamp? Selling for my friend. $25 plus the ride. Prefer PayPal but will take a check. Email me from my profile please. Thanks.

I’m looking to put together a reliable engine together with an oil pressure system, drilled “C” crank, and a Roof 8 “Liberty” head. It’s my understanding that the various OHV engines had issues with sufficient cooling for the rear (#4) cylinder. This was known, even back in the day, so Frontenac included a water manifold with their converted T...

Nothing ever fits the first time. Fitting the floorboards and back seat area.

Battery access lid. The lid is 12 1/2 inches wide. The area it needs to fit is 12 1/4 inches wide.

When I got the body in pieces from a friend of mine, there was no battery access lid. I found one in his shop that was the same patina at the wood in the body but he...

WTB: older used script floor at for my old restoration 1915 roadster.
Tattered, ripped, worn ok. Just don't want to buy a new one would not look right in my 1957 worn restoration of a '15 roadster.

frontyboy

(brasscarguy@comcast.net)

This is a set of cast iron stops that mount to a T front axle. I’m guessing the idea was to keep the spindles from going over center.

There looks to be a manufacturer name cast in them but I can’t make it out.

I’ve never seen another set like this before. Would make a really great addition to any Model T accessory collection.

SOLD! $100...

I have a nice early 1915 steering column for sale. I do not have any clue as to its value. What would be a fair price for both the buyer and me?

I am trying to find out any information on Curt Austin (I believe out of Roscoe, IL) and his vehicle restorations. His name keeps coming up (in passing) in connection with some high-end restorations, but nothing more than it was restored by Curt Austin. If anyone has any information that they might be able to offer I would be greatly appreciative.

About 25% of early Ford sales information survived in the Accounts Receivable ledger books at The Henry Ford, Benson Library. Trent Boggess tirelessly entered the data by hand (thousands of records) into a database included with Carl Pate’s (RIP) Early Ford book.

However, reviewing the actual ledger pages and entries provide additional...

We have room for another project here now. Can take in one whole car restoration or 1-2 engine only rebuilds. No wait list.

For Sale 1909 Kingston 5 BAll Carburetor excellent shape. $1500.00 Call John 352-256-7234.

F/S: Ruckstall Shift Rod Support. $15.00 plus shipping.

R/S,
Jonathan Bodine

I have 19 coils of which non have the Ford Script but are in pretty good condition but untested. If interested text me for pictures 631 445 five six 9 seven.

Manny

Ford Motor Co. began selling cars in July 1903. The company experienced immediate success, and sold almost 200 cars by the start of their first full fiscal year, beginning October 1, 1903. The Electric Vehicle Co. wasted little time initiating a law suit. This author indicates the suit is expected to last for years. He was right.

IMG_6244.jpeg...

You will remember last year I built this speedster on the forum. IMG_2278.png

Now that the snow is gone, it’s time to get some paint on it. This will NOT be a show car, so I started by painting the chassis dirty equipment black, outside, hanging by a forklift. I’m pretty happy with the outcome. IMG_4013.jpeg IMG_4017.jpeg IMG_4014.jpeg...

Full frame up no expense spared restoration Ex Joe Henshaw ex Lud Gocek. Stunning concours and correct restoration Midnite blue and black
Closed valve motor with electric start added for ease of operation. Wood bands.
12 rivet Clamshell diff with 2 pc driveshaft. Original brass with new brassworks radiator. All original sheet metal excepting new...

I have a few sets of tubular front and rear shocks various brands. $100 pr plus post

Looking for a left and right side window glass channel for my 27 tudor also need a drive side window trim that goes on the bottom where your arm rests 4 hold for a tudor also

Looking for the Hose Connector Boyce Motometer Co. supplied with their Red Ball column or dash mount gauge.
]Howard Dennis

100_4758 - Copy.JPG

I need a drivers side front bumper bracket for my 1926 Runabout.

Mike Russell
Columbia, MO.
ml.russell1936@gmail.com
573 864 6539 Please leave a message if I don't answer my phone.

For sale: new stop light switch $25 plus postage
20250416_111554.jpg

Left over wood parts for a 1924-25 Touring from a Fordwood re-wood kit. Part # 193-Door wood driver rear, 3pcs. bottom of door piece not included. #355 Pillar #4 driver side. #314 Pillar #2 passenger side. #167 panel brace driver side. #303&304 cowl rails. #325 floor riser, tack strip front.
$100+$25 UPS shipping. Check or paypal. Email me through...

I have some Cast Iron Oval Double Stacked mag coils for cores. Any interest? Can bring to Luray. Email me Dan

OK - now here is a long shot request. Does anyone out there have an original U & J hot air pipe for for grabs? It has a corrugated elbow .- Dusty

Hi,
I have a 1923 Ford Model T in the Twin Cities, MN that I need to get running. Will pay for the assistance.
Thanks You,
Ted
651-336-5196