MTFCA Forum

I have heard that the Z heads have some size variation between the different cylinders. Especially compared to a Prus head. This was posted here many months ago so I decided to measure the sizes of my Z head.

I found that cylinders 2 and 3 were perfectly matched at 211 grams of water. #1 measured 210g and #4 held 208g. I think that is a...

30 brass fits a T great
Asking $100
Contact
Bob
Jalopyt@yahoo.com

Barn fresh find clear lens is broken missing burner brass good and cracked
Asken $250 obo
Contact bob
Jalopyt@yahoo.com

Anyone in the South Bend area willing to give a 90 year old a ride in a model t for his birthday?
Thanks,
Brian Jordan

Can anyone ID these please: Thought to be clips for attaching an extra spare to the spare carried on the car (making it a 'dual spare'):

Your confirmation and identification of any 'missing' bits is appreciated.

Thanks, Adrian

1744772869.jpg

I am looking for well used and rusty mirrors for my 1921 Runabout.

I would like to buy a taper leaf front spring. Close to Missouri would be nice so can pick up.

FS re-built model T Ford engine 1923. Runs good and strong, new valves, pistons, wood bands, good Magnito, no generator. $3200.00. Bill, Sudbury MA
781-710-6714

Chevy 490 tranny for sale. Doesn't look like much but gears are well oiled and clean. Can be used like a Warford. Will not ship. Make offer and come and get it.

Lot of Original Magneto Post Springs. Make offer plus shipping. USA only

Lot of Low band adjusting screws. These are NOS. Vendors charge $15 each. Will take $5 plus shipping each for the lot. I have many more of these in stock.

25 original magneto support spools. Make offer plus shipping, USA only.

34 pieces of coil points. Most are not used. Got caught in the rain in Hershey. Make offer plus shipping. USA only

Lot of un-used coil points. Re-pop coil points are $10 pr from the vendors. Will take $20 for the lot plus flat rate envelope shipping. USA only.

save, cheaper than retail but act fast almost over

I am looking to see if someone makes the top back panel on a 1927 tt

I can be reached at (731)223-1488

Thanks
Michael

Very nice large 2 1/2 face dash clock, runs when wound, complete, nickel plated which could be stripped to bare brass as this is solid brass construction.
$235, domestic postage $15.

NOS ‘23-‘25 Tudor or Fordor left rear fenders, 2 available. Minor surface rust but NO metal repair needed. $250 or $400 for both. Pickup ONLY near Olympia WA.

NOS ‘23-25 Tudor and Fordor right rear render. Has some surface rust but needs NO metal repair. $250 pickup ONLY near Olympia WA.

I need transportation for 5 wire wheels, 4 have tires mounted and have hubs. From Hayward, CA. to Friday Harbor, WA north of Seattle. Any where close to Seattle would be a plus and save me a trip to CA. Glad to pay for gas.

Jim

FOR SALE: I have a new Tiger Timer #T-3165 in original box. 20220704_212142.jpg 20220704_212054.jpg 20220704_212130.jpg $65 plus postage

Original accessory used new old odd lot of Model T magneto post parts, as-is what you see is what you get! $35, domestic postage $10.

Excellent hand air pump to pressurize gas tank, $225, domestic postage $15.

This is a Shriners Model T go cart. Runs excellent and is in great condition. Has a 3.5 Horse Briggs and Stratton engine. $2000 or best offer. Located in Sparks ,NV

Beginning with his racers, Henry Ford recognized the importance of horsepower to weight ratio. His first racers were no fluff, all motor and no creature comfort space eaters, evidenced by Arrow and 999, the 20 hp skeleton racer, a creation made up of two 1904 Model A 10 hp motors, and his 1100 hundred cubic inch six cylinder racer. This carried...

Pair of used original 1926-7 screw in magneto posts. $25 for the pair, domestic postage $10.

For Sale: Canadian built 1914 RHD Model T Ford ‘C’ Cab. Serial number C22309. Exported, and eventually returned to Canada, restored, from New Zealand in 1991. Five Firestone tires, with balance beads, estimated to be 8 years old, wheels re spoked in 2015. Installed a Brassworks Brass radiator in 2018 as well as a WOSP 12-volt starter in 2019. Has...

For Sale: Wishbone in good condition $45 plus freight 20220528_123017.jpg 20220528_123025.jpg

Wtb,
1914 roadster door. I believe a 1914 touring front door would be the same ?

Thanks
Steve Meudt

FOR SALE: Brake rods $45 pair plus postage
Radius rods $45 pair plus postage 20220611_134916.jpg 20220611_134904.jpg

I will have a restored 15-16 coil box and a restored 26-27 coil box at space E-1 Thurs. noon thru Friday

I will have some restored 20-25 battery horns at Iola Space E-1 Thurs noon thru Friday.

I will have refurbished starters and generators at Iola space E-1 from Thurs. noon thru Friday. Plus other T parts

20220629_202725.jpg 20220629_202718.jpg For Sale: new tail lights $30.00 each plus postage 20220701_103452.jpg Also chrome frame for a light $10 plus postage

I used to really enjoy Dan's posts, especially about his two grandsons. But he seems to have dropped out of sight in the past year.

Dick

For sale: commutator rods bundle for $5 plus postage
NH spray needle assembly with u-joint and sleeve $30 plus postage 20220630_121835.jpg 20220630_121853.jpg 20220630_121207.jpg 20220630_121207.jpg

Sorry - Double Post due to a cerebral malfunction.

For Sale: 1915 to 1925 coil box in excellent condition $155 plus postage

For Sale: Brass Bridgeport Tire Pump. Very good condition just needs to be cleaned and polished. Not sure if it makes air. Pumps up and down with no problem. $175.00 plus postage 20220630_122513.jpg 20220630_122458.jpg 20220630_122831.jpg

Cleaning out the top of an old timers barn. Approx. 12 lbs. of misc. frame brackets. What you see if what you get, remember old times never threw anything away good or bad! $50 and THAT includes shipping in the CONUS. Please respond to this email, jandulics@gmail.com

8076468A-B218-4DBD-9DD5-39D204D83D2B_1_105_c.jpeg...

3 general brown 1 10s plus a 1 10 top
$450 for all

Message me at 509-935-0627 or use email R_Flesnner@yahoo.com

For members who own brass era Model T’s and members who enjoy restoring antiques with polished brass parts, the subject of polishing and protecting polished brass comes up often on the forum.

Though I don’t have a brass era T, I have been collecting and restoring antiques for 55 years and until recently, have not been able to find a good...

I will have a Magnafluxed and ground crankshaft at Iola space E-1 from noon Thurs. thru Fri. Ground .020 rods and .030 mains with .020 rebabbitted rods. $600

I have for sale an individual cell tester for I assume six volt batteries. It tests up to 2.8 volts with “good” being about 2.1 volts.

I tested it and it seems to work. It’s in very nice condition and has the original lead with probe

45.00 plus shipping from Oregon

Please email
Travellak1@gmail.com

I have a pair of 1914 patent Macbeth lenses.
9-1/2” across.
One has a small chip about dime size in the green area. Likely would be covered by trim ring.

100 plus shipping from Oregon

Please email
Travellak1@gmail.com

For Sale: Dome light $25
Dome light with wood looking trim $25
email for pictures

all plus postage 20220620_185656.jpg 20220629_202617.jpg 202206

-
MTFCSD 2022 San Diego Endurance Run , a 3 Day Event
All welcome. Speedster and Non-Speedster Classes.
Saturday, Oct. 15 - Monday, Oct 17.
Day 1: Lowlands Tour.
Day 2: The Main Event.
Day 3: Salton Sea Hangover Tour
The Palm Canyon Resort, Borrego Springs, CA. (805) 691-8086
Preferred rates available until July 8th. Group: MODEL T FORDS...

Here is a NORS radiator cap to fit the model T neck. This has a knockout hole where you can easily mount a motometer or other type of decoration, and not ruin your original cap. Comes with the box, as you can see intact but poor condition. Some light scratches from storage. $55 delivered to your post box or mailbox. Tmorsher@icloud.com to reach...

As the title says, I’m in need of the rare and elusive hens tooth; I need an original one-piece right hand spindle for my 1910 touring. I’d buy the pair if needed. 586-651-5760

I will have several rebuilt Holley NH carbs at space E-1 Iola swap meet Thurs. noon thru Friday. Also other Model T parts.

KR Wilson A335 rod jig with three mandrels. Mandrel sizes: KRW 2.218, 2.000, 1.875, 1.801,1.500 #2 1.498, 1.491, 1.486, 1.468. #3 1.250
At the Iola swap meet, space E-1 from Thurs. noon thru Friday $300

K R Wilson Mosel A main bearing tools at the Iola swap meet. Babbitt pouring mold, false cam, boring frame, rear main facing tool, and base plate for combination machine.
Space E-1 Thurs. noon thru Fri.

For Sale: Wood pickup bed to convert a roadster into a pickup. Original, complete, usable condition, some wood rot at front corner as seen in the photo, the rest of the wood is sound, latches and hardware in working condition with only light surface rust. Has wood trap door opening in floor for battery access. Located in northern lower peninsula...

Have for sale another working Generator.

It works on battery as seen in the blurry gear photo (tested on my old lawn mower battery). I assume then that it would work in a generating capacity as well? At least I feel like I read something like that years ago. I would assume since it runs as a motor, then the field coils, armature, etc are all...

Have for sale a working Generator. It works on battery as seen in the blurry gear photo (tested on my old lawn mower battery). I assume then that it would work in a generating capacity as well? At least I feel like I read something like that years ago. I would assume since it runs as a motor, then the field coils, armature, etc are all good....

20220628_141601.jpg
For Sale: FORD Script tail light 19/23 $50
stop light 19/25 $25

20220628_141526.jpg

plus postage 20220628_141700.jpg 20220628_141630.jpg 20220628_141526.jpg 20220628_141601.jpg

Today we rustled up another one of our picnic tours since Covid began. Started at member Arts house, on to the shore of Huron Park to eat, watch a snake swim and almost get caught by a Heron. Then off to the ice cream shop (thanks Mark for the treat!), then off we went on southward around a small village and a country tour working our way westward...

A customer of ours passed away a while ago and his wife asked me to sell a few items on T Bay fort her
complete new set of Timken front wheel bearings, and a few other items, fender eye bolts, hubcaps, horn parts
here is a link, Bob

hard to get

For Sale: early 1913 Ford Touring with B179 engine (B engines were used from mid-October through late November 1912 for the 1913 model); engine disassembled and ready for rebuild. Has correct 1912-1913 parts. New wood throughout body; Correct rims and hubs included. Located in Redding, California. $10,000 OBO. Contact Dennis 530-246-1446...

Looking for an akuret oil guage aftermarket accessory not the one for a 26-27, but the earlier one. This is the one that comes through the apron. Anyone got?

Two 2340 tyre levers, as shown in January 1913 Price List of Parts book for 1909 -1913. Both stamped Goodyear, but not quite identical. $84 the two, posted to your door. PayPal friends.
Allan from down under. 20220628_124902.jpg
20220628_124835.jpg

$40 ppd for what you see. Tmorsher@icloud.com thanks! 9757F74B-D1A6-43A3-8D7A-9CAE335849BA.jpeg

The body is solid cast bronze and the bell is brass. I tested this with my air compressor and it is ear splitting LOUD!!!! Asking $75 plus postage.
Air horn 1.jpg Air horn 2.jpg Air horn 3.jpg Air horn 4.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

I have a few crank ratchets for sale. $10 plus shipping. USA only.

For sale: All have FORD Script
3Z647 offset wrench--connecting rod clamp screw $25
5Z155 L socket wrench 9/16 $25
5Z160 T socket wrench 9/16 $25
5Z195 open end 9/16 $25
TT5893 combo $20

plus freight

I would like photos of the common sense fastener location for in back of the top iron. I have the front one in place, but failed to note the location of the rear one, if there is one located there. My touring has them, so I assume the runabout does too. How could I have missed that??????

I would like photos of the common sense fastener location for in back of the top iron. I have the front one in place, but failed to note the location of the rear one, if there is one located there. My touring has them, so I assume the runabout does too. How could I have missed that??????

These are uncommon in complete condition. Used for the 1926 1927 style T or TT that didn’t come with the electric starter generator option. Great for speedster use, too. Complete, it appears in great shape. Ford script key is stuck , but with some time , patience and penetrating oil, you should have a nice unit. $45 ppd to your door,...

Here is a handle I believe was used on one of those little hand crank valve grinders. Easily lost, so here ya go. So you know what I’m talking about, pictured is one complete unit here, with Whitey Best’s last set of two piece valves. It has an old blacksmith repair which I should charge extra for , but never on a Monday. $35 ppd to your door,...

These are new, never used or mounted. $65 each in the catalogs , this pair is $90 shipped for free with another purchase. Don’t mind holding them , if you aren’t making another purchase. But here ya go, the next oil can holder I’ll knock $5 off and ship along with. So , $55+ 90 udothemath Tmorsher@icloud.com to rattle my cage. Thanks!

FOR SALE: fan bushing 20/27 $9
bendix cover screw set 4 pcs. 19/27 $2
speed connector slow 9/27 $8
starter drive sleeve for bendix $12
bendix spring 19/27 $10
generator brush set $7
latch repair kit 26/27 $22
axle shim 11/27 $1

all plus postage

I have about 10-12 N.O.S. Rear camshaft bushings
these are steel and original, 6.50 each plus postage, Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please

New 1915 Hood with leather rub strips and rods. $400 plus shipping.
Contact Jim 970-373-8864 NO Scammers please.

For Sale: A Mag Charger for Ford and Fordson Model 23 made by Colpin Los Angeles Ca. $250 plus shipping

Set of early and late Clamps $20.00 shipped to your door call Matt 503-824-2681

For sale Three Apco Emergency Motor Mount Ears asking $30.00 shipped to your door call Matt 503-824-2681

For sale rear brake drum $25.00 shipped to your door call Matt 503-824-2681

E Brake Quadrant for a 26/27 asking $15.00 shipped to your door call Matt 503-824-2681

For Sale a set of Arms and Saddles $40.00 shipped to your door call Matt 503-824-2681

A pair of 26-27 fender brackets $40.00 shipped to your door call Matt 503-824-2681

Cover for a 4 dip oil pan asking $35.00 shipped to your door call Matt 503-824-2681

PayPal to friend & Family preferred to my email address - plus shipping
Four Firestone S-120-CF spark plugs appear to be NOS. Three of the four boxes are in very good condition and have instructions. The forth end flaps or missing, $60
IMG_3533.JPG
IMG_3563.JPG
--
--
Four Champion C 4 spark plugs look to be unused. Three of the four are the...

This is a well preserved original period spotlight for your enclosed car. The reflector is in excellent condition. Asking $120 plus postage.
S&M Closed Car SpotLight 2.jpg S&M Closed Car SpotLight 3.jpg S&M Closed Car SpotLight 4.jpg S&M Closed Car SpotLight 5.jpg
Please use this email address below and NOT the personal messaging...

Here's an interesting tire pump. The outside of the body pulls up and down and the inside stays put to the foot holds when pumping. Made by the HOLSTEIN MFG CO., RICHLAND PA. It's in excellent shape and will need a new leather pump washer to work along with a hose kit. Asking $75 plus postage.
h1.jpg h2.jpg h3.jpg h4.jpg

Please use this email...

Original magneto post for brass era Model T, $45, domestic postage $10.

Original accessory magneto post oiler for pre 1926 Model Ts, good shape, you add the tubing, fittings and route to your favorite place at the front of the engine. Will include set of 3 original mounting screws. $45, domestic postage $10.

For Sale: #3Z1179 flywheel capscrew wrench $30
windshield slide arm, knob and bracket 26/27 $15
ratchet for starting crank $10
steering gear bracket T9320 Ford Script $25
spindle arm #270B Ford script $25
fan bracket #T604A Ford script 13/16 $25
fan bracket #t604 Ford Script 17/25 $20
starter drive cover $10
carb adjusting rod 18 1/2 long 17/25...

Routledge Body-Rebuilt engine & Transmission-Belt Driven Water Pump-1926 Hubs & Wire Wheels-Wolford Direct over & under transmission behind the Model T transmission-Disc Brake on Rear Wheels-New 21 inch tires. $12,000.00 Call Kevin at 812-457-9580. IMG_0270.jpg IMG_0267.jpg

Nice straight head light bar original for the 1926-7
100.00 plus postage, Bob
815-633-7244
modelt2001@comcasst.net
no p.m.'s please

As found and readily restored, early Model T timer,

I’m looking for a pair of original brass Rands Windshield hinges for a Brass windshield. What do you have?

mikebird@lifeattheridge.net or 574-584-6744

Thanks
Mike

This is the very early style with the screw to hold the taper rather than the later spring. I need $71 for it, posted to your door. Unfortunately, as small as it is, it has to post at the minimum parcel rate.
Allan from down under. 20220624_161251.jpg

These plates are in excellent near new shape and just need to be painted the proper colors for the year. I checked them out with DMV a while back and they were clear in the system. Asking $115 plus postage.
1924 plates 1.jpg 1924 plates 2.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg...

I have a set of Reproduction Touring car and Roadster top irons for sale. These sets will fit many different cars but work well for model T’s. They are not exact copies and not originals but have some of the same characteristics as the originals. They have rests so they fit together when folded, as well as oval ends to fit your steam bent bows....

Eismann magneto multi wrench. The feeler gauge mics at .012 . $60 including shipping in the U.S. Outside the U.S. I'll have to check shipping rates. If interested, please respond by email. Thanks.
Bryan Ostergren
planetaryman@msn.com Eismann 1.jpeg Eismann 2.jpeg Eismann 3.jpeg Eismann 4.jpeg

For Sale: steering gear pin set for 9/27 $2
front axle and steering castle nuts for 9/27
MBB Quadrant mounting rivets. BRASS $1
lower crankcase cover bolts 17 pcs. 9/27 $3
Head bolts High Cylinder 3 1/4 $1.75 each
Differential gear key $1.50
Fan bushing $7.50 pr. 20/27
Manifold studs and nuts 9/23 $2 each
Brass thrust washer $12 each
Brake rod...

DSCN1591.JPG DSCN1590.png

Two new square beveled side lens John Browns (a little bigger than E & J)
Two new round beveled side lamp lens Believe John Brown
Two exc. head lamp Y burners
One... looks NOS? E & J red tail lamp lens
Two new nickel plated burner tops John Brown and could be adapted to work with E & J
Two new head lamp elbows universal & John Brown type
Two E & J...

The starting crank has been sandblasted and repainted, the ratched looks like it was never used $40.00 and may have a used leather holder if I locate it will included it to. Dave 507-838-0696

For sale: crankcase breather cap in good condition. $50
Exhaust pipe pack nut $10
cover band for generator $5,
heavy flat pedal Brass trim set $50
steering gear quadrant $20
Aladdin Wick Cleaner $10
Flame Spreader $15