MTFCA Forum

Steve contact me ASAP if you still need a header flange for standard, non-OHV motor. Terry Woods

Reliance brand porcelain 3 1/2 face, 5 overall mounting flange,3600 RPM markings, needle moves when spun by hand, nickel plated case that could be stripped to bare brass, marked on back 1/2 to 1 so is calibrated to be driven at camshaft speed. $185 which includes domestic 48 state shipping. Contact me thru MTFCA messaging.

Believe this to be a Spencer brand wheel. Excellent condition complete working and ready to use. Tilts, locks and has original keys. $550 includes 48 state shipping. Contact me thru MTFCA messaging.

My neighbor needs a used vinyl top (no bows need)
Good condition or good enough so it could be used as a pattern to remake. Pictures would be .
Thanks MTFCA
Larry LaPatka
Email: ltlapatka@gmail.com
Or call Mike Kirchoff at (954) 789-1280

Selling for a friend. Best I can say is this generator does motor...as you can see it needs the gear and cutout. If nothing else it's a good core to send in to a vendor for exchange. My gut tells me it'll work once the necessary stuff is attached. $50 plus the ride...I imagine like a starter I shipped it'd be somewhere around $20 depending on zip...

For Sale: 1923 Model TT Truck. Family owned for over 60 years. Runs and drives. Warford auxiliary transmission, distributor, electric start, Boyco cans, clear Michigan title. Located in Newaygo, Michigan. I am listing this for Dan, please PM me and I will give you his contact information. $7.500 OBO.
TT1.jpg TT2.jpg TT3.jpg TT4.jpg

FS: 2 Very used Accessory Devices, installed between the carb and manifold to Improve Fuel Economy basically just air valves that lean out the fuel-air mixture at higher speeds, AKA a vacuum leak. These are being sold as a collectible only, for obvious reasons. Asking $5 for the pair not including shipping.

tquack01.jpg

More photos of 1913 coilbox and parts

Rare 1913 KW coilbox. Used on Model T Ford cars in the last half of 1913 production cycle. Faithfully reproduced by a professional cabinetmaker in Cherry wood using an original 1913 KW coilbox as pattern. Excellent quality workmanship. All holes and channels for ignition switch internal wiring are included.
This complete coilbox package includes...

Original stand in nice unrestored condition. $45 domestic 48 state shipping included.

Should you be working on an original switch, do not assume the 6-32 screws that hold the brass plate on are the correct length. Try one gently to make sure it will work properly. I had a NOS switch that I decided to upgrade with a nicer looking plate. The screws were a tad too long, and pulled out the inserts. with messed up the whole switch....

Ford Motor Co. was an immediate success financially. Within months of their first sale, the company issued stock dividends to investors. In many cases, the dividend actually paid a portion of some investors commitment (agree to stock purchase), as several had not paid actual cash, or their full commitment, but issued notes (loans) to pay in...

For Sale: 1929 Ford 2-door. --- 30 years of inside dry storage. Engine free and should run. Complete with good windows. Body panels are straight and rust free. Could be original paint. Has title. Needs new top and interior. Please call 717-818-8171. $2800

For Sale: 1926 Model T Roadster. All original, runs and drives, no top irons, original Baltimore parking light. $4500.

For Sale: 1926 Model TT Huckster Truck. Needs front sheet metal. Very good wheels (I have a set of like new wheels for additional price) Engine free. Call 717-818-8171. $4500

I would like to find a set of Rootlieb's curved speedster fenders.
I have a set of Rootlieb flat speedster fenders.

Anyone want to swap?

rootlieb fender flat and curved.jpg

: ^ )

Keith

Is anyone here picking up/transporting lots from the Richard Eagle estate who might be able to help me transport my lots to Northern Utah? I'll be near Salt lake city from the 21st to the 26th.

I am looking to make a spare tire mount for a 48 spoke Dayton wire wheel. I would like to use a Dayton hubcap to hold the wheel on. Does anyone have a spare hubcap they are willing to part with? It does not matter if it’s left or right hand thread.

I have a set of front Hassler shock absorbers for sale. The price is $200.00 plus $25.00 for shipping. These are the single-spring Hasslers, not the double-spring type.

Well I am going to be attempting to respoke all of my wheels here soon since the wife has been on me about getting the T running for the warm weather. I know there are blue prints available to make my own Regan press but what are the chances that there is someone on here in central Indiana that might let me rent their press that is already made?...

Come and getting them before the scrapper does 2 pairs I parted them out I've got a pile of whole axles don't need empty housings sitting around located pleasant prairie wisconsin. I would have to be heavily bribed to ship any of these

I've actually had this for years and nobody seemed to want it. Noticed one just sold, so here she is again. 45.00 plus shipping. ctleonard64@gmail.com IMG_20250611_101026186.jpg IMG_20250611_101014659.jpg IMG_20250611_101019956.jpg IMG_20250611_101008731.jpg

I would like to buy a complete, running late brass era engine, 1914-1916 with working transmission

Just like this

Low radiator shell. Has been welded on and has a crack. Selling as is for parts or repair. $40 plus $20 to ship

Anyone got a Kevin Prus aluminum head that they are not using? New or good used? Maybe you sold your car after buying the head, or went a different direction after buying. I could buy new direct from Kevin, but I thought I would do some fishing on the Forum, first.

Works as it should. 25.00 plus shipping. ctleonard64@gmail.com IMG_20250610_110224434.jpg IMG_20250610_110203364.jpg IMG_20250610_110211893.jpg

Doesn't appear to have ever mounted. These are 410.00 each. You can get both of these for 425.00 plus shipping. Located in mt.vernon Indiana. ctleonard64@gmail.com IMG_20250610_102008693.jpg IMG_20250610_102025445.jpg IMG_20250610_101845058.jpg IMG_20250610_101832138.jpg

Vaporizer manifolds and carb 200.00 plus shipping. Art

Aeromoter whistle, cutout and pedal. 225.00 If you want the complete exhaust with whistle and pedal 275.00 but not sure how to ship it. Art

Excellent original narrow drum. Magna fluxed for cracks, cleaned and polished. Minimal wear on the clutch lugs. $275 plus the ride. Contact me through the forum messages .

I believe this drum was used up through 1913. It has been magna fluxed and polishhed. It does have a minor scar on the drum surface. Lugs are very useable and the shaft is tight on the drum. $250 plus large priority box charge. Contact me through the forum.

Any photos of the swap area?

Fellas, do your family & yourself a favor and fill this out.

I’m Amanda Fowler — the daughter of a classic car collector and a Classic Car Concierge.
I’ve helped families sell everything from beautifully restored classics to dusty barn finds, and let me tell you — the hardest part isn’t the sale… it’s the missing info.

That’s why I created this...

Chaffin's, Lang's & Snyder's pages don't agree with - what's correct?
If you look just at images & descriptions
First row Chaffin's, Lang's & Snyder's match. Chaffin's & Lang have part as 5679AX 'but Snyder's has part number 5680AX
Second row Chaffin's, Lang's & Snyder's descriptions match. Lang's image is different from Chaffin & Snyder. Snyder's...

IMG_0419.jpeg I have a set of these McLeran wire wheels on my 1913 roadster. I would like to work out a swap for a new set of round fellow wheels.
Ed Larson
620-845-0880

Ford Motor Co., and Henry Ford experienced many strategic events during the first years of the company’s existence. 1903 saw company formation. 1904 saw continued growth, still selling the venerable Model A. 1905, arguably saw unparalleled growth, with the advent of three models, the first four cylinder model, and two 100% dividends paid to...

I have a 1926 coupe deck lid for sale. It is not perfect but good shape for right about 100 years old. $250 plus shipping

I also have the two rear quarter panels from this coupe and the spare tire bracket. Trunk floor, and very nice subrails for sale

I have a 1926 1927?roadster deck lid. It has a couple cracks in it and some dings. It is not perfect. These are getting hard to find.
$400 plus shipping

I have a 26/27 turtle deck available also. Thanks

for sale : set of early HEAVY type connecting rods for sale ( CHEAP) ... i removed these from the 1st. open valve T engine i worked on 30 years ago ...the babbitt was still very good and i butt ground the caps and ball burnished to STANDARD diameter to restore the fit ... these are too good to throw out and there is very little call to re-babbitt...

For sale: running board tire pump $50 plus postage
with hose and guage. hose came loose from pump. could not find a name
20250527_194356.jpg 20250527_194438.jpg 20250527_194831.jpg

For sale: exhaust manifold $50 plus postage
20250607_170344.jpg 20250607_170059.jpg

Any out there?

So how is the swap meet? No one go? There are no posts about it or homecoming??

3 fun days of touring heading to the reunion tomorrow. Kudos to those who organized and layed out the tours. Great roads and destinations. Only a little bit of rain on Thursday. But was fun to be around all the different Model Ts and their owners. Looking forward to the Reunion tomorrow.

Wanted to buy a late 1925 open car dashboard in good condition. Have lots of the early style to sell or trade.

Hi.
I have been collecting T parts for about a year.
A frame, motor, axles, steering parts...other random bits.
I don't have much of a plan, but i'm very excited about this almost car.
If i can find front and rear springs and a rear wishbone, i could get this thing to roll.
If you are near Pgh, and have T parts, i would like to shop at your...

I have a '23 Runabout, see picture. I'm on the prowl for a Model T-appropriate tool box that's shorter than the one I have now, to gain more running board luggage space. The current one is 22 long, so anything shorter than that may be of interest. Tall or short, I'm flexible. Thank you.

Hello I’d like to buy a nice 1925 hood. Thanks

For sale Springfield Tire tool for Clincher Tires. Threads are in great shape. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

It is that time of year again and getting closer, You need to contact Miller Ferry and ask for Cheryll Rose to get advanced ticket sales. The tickets can be used on another date or fully refundable if a rain out that day. If you have never been there it is a great time, plenty of things to do and the preparade and after parade lunch basically pays...

Got my entry in this morning! I’m bringing two cars this year. ‘22 center door and ‘23 Touring. My son was deployed last year, he got back yesterday. He wanted to go to the festival so, he earned it! So I am bring a car for both of us. I am hoping to park them together on the ‘22/‘23 line. My promise, so I hope I get in!

I tried to upload...

I have a nice 1927 running gear. Engine/transmission, radiator, steering column, wire wheels. $3,000 OBO I have many other parts available also.

I have a complete running gear for a 1925. Engine/Transmission, frame, front and rear axles, radiator, Firewall, steering column, coil box, headlights. Front and rear fenders. I have everything except I do not have a hood or the oval fuel tank. I was going to build a express pickup or depot hack but I bought a different project. I would prefer to...

I am restoring a 1926 TT Steel Cab truck and need a windshield frame, fresh air cowl vent flap and a passenger door latch.

Hey Guys!

My first of at least two planned Model T related books is available for sale today! The e-book is available from several vendors. Paperback will be available in a couple of weeks! Link to all of the current vendors is below!

Book Cover.jpg

Only because of Eds post below, I happen to have one of these laying around. 150.00 plus shipping. ctleonard64@gmail.com IMG_20250531_074851405.jpg IMG_20250531_074843368.jpg IMG_20250531_074902561.jpg

So this happened today :D

The weather was a little hit and miss, but the sun came out just in time to drive Brooke to her wedding; and a beautiful wedding followed. Congratulations Brooke and Steve on your Marriage!

Hi, Is anyone here bringing a T to the San Clemente Classic cars show tomorrow?

For years I’ve been curious, why did Henry Ford and his designers develop the Model K with individual jugs, when the Model N motor was cast in pairs? It seems that pairs were the natural wave of the future, leading toward the future Model T mono-block.

Then I read this May 1906 “Horseless Age” article.

IMG_7584.jpeg

The article mistakenly...

In good condition. 45.00 plus shipping. ctleonard64@gmail.com IMG_20250530_100632712.jpg IMG_20250530_100714246.jpg IMG_20250530_100655680.jpg

09-13 frame, blasted and primed $500.00. 1912 holley carb $200.00. 1913-14 DB axle $50.00. 1915 E and J model 8 and model 9 side and tail. Perfect restored $600.00/set. Much more misc mechanical and trim parts. All will be available at the Monday swap during the MTFCI tour in Owatonna, MN July 21st. Pre sales welcome.

35.00 Plus shipping. ctleonard64@gmail.com IMG_20250530_080447214.jpg IMG_20250530_080518828.jpg IMG_20250530_080508471.jpg IMG_20250530_080458951.jpg

As stated, threaded brass elbow for 15 horn. 45.00 shipped to anywhere in the USA. ctleonard64@gmail.com IMG_20250530_080528489.jpg IMG_20250530_080535486.jpg IMG_20250530_080528713.jpg IMG_20250530_080550803.jpg

I have 3- 28x3.0 never used old but new inner tubes. Two are from Coker and I cannot see where they were made but they are thick rubber. The third tube is a Universal brand tube that shows it was made in Mexico, also thick rubber and the rubber stems says Schrader on it. These came from a deceased 92 year old friend who had a Model S and did not...

I have several 1914 windshield frame sets that I will not be using. I can bring one or several to the Homecoming is anyone is interested. Price will vary from $150-250 depending on condition. Let me know if I should bring any. Mike

I have several 1914 windshield frame sets that I will not be using. I can bring one or several to the Homecoming is anyone is interested. Price will vary from $150-250 depending on condition. Let me know if I should bring any. Mike

Have one for 15-22 touring and one for 15-19 roadster.. 25.00. Each plus shipping. ctleonard64@gmail.com IMG_20250529_090620705.jpg IMG_20250529_090603363.jpg IMG_20250529_090544362.jpg

I’m looking for the weight of both the 16 inch (primarily 10 hp A) and 20 inch (8 hp) flywheel. If anyone has a n A motor apart I would appreciate the weight and measurement of the flywheel. If the crank is still attached, the weight of both is good too.

The Model C flywheel should be the same as the 10 hp A, but if anyone has the “C” flywheel by...

A very clean Ford script inlet. T-442. 28.00 plus shipping. ctleonard64@gmail.com IMG_20250529_075851403.jpg to IMG_20250529_075834153.jpg IMG_20250529_075907637.jpg IMG_20250529_075820246.jpg IMG_20250529_075803176.jpg

FS: One Cowl Light and one Tail Light in Barn Find condition. The tail light is nice and solid with good lenses, and it doesn't look like it's been monkeyed with except for the addition of an aftermarket bracket extension that I don't quite understand the purpose of. Also a cowl lamp, with good sheet metal and glass, but the catch for the door is...

Fan mount / water outlet $45 each one missing fan 35$ plus the ride will probably need bushings one has pitting round the hos connection

Coil boxes for starter cars 19-22 and all 22 -25 no tops no coils all have the latches all need work $20 each plus the ride

Cheap empty coil boxes 30$ plus the ride for all 4 all have latches no wood no coils no tops

Dash choke pull 2 have the fire wall levers all are decent shape 10 each plus the ride

1915 all original Model T “Canadian” radiator. Needs restored.

Located in Napoleon, OH
$750 (open to offers)

Call Amanda at 917.699.7670

1915 Ford Model T Touring

This beautiful Model T is an excellent example of an American classic touring car, that was built in Canada in June of 1915 and still retains all original Canadian markings.

Originally purchased by Harris Fahenstock—whose family stood among the social elite alongside the Vanderbilts—this 1915 Model T was his preferred...

Someone contacted me regarding an original take apart early switch - I've attempted several replies but no cigar !

Selling Model T four door body parts. very solid. From what I see doors have moldings and window cranks ect. Door posts and body brackets as well and hinges. want to sell as complete parts, Let me know what you need. will trade for 26-27 parts I'm looking for. see pictures. E mails or message me here. Mike

Many Model T owners might be surprised to learn that Ford Motor Co. had already dove headfirst into vanadium steel production by the summer of 1907. For anyone seeking in depth study of vanadium at that time, a few links:

This recap appeared in the ALAM magazine (Selden Patent opponents).

I have a tall and wide Model T era runningboard tool box for sale. Solid box, good bottom and has a heavy-duty latch on the lid. Measures 18 wide by 10 tall. Will ship on your nickel. $80 located in Oswego, IL. Has a split in one corner. Good paint.

Thanks,
James

This video is not Model T related but is Ford related, and does have a connection to the Model T.

Tom Cotter visits a racing garage in Alabama. Outside the shop, sits a 1950 Ford, one of two in the 1997 Peking to Paris race.

The navigator of the car was none other than Vic Zannis, who passed away in September of 2018.

Teeth are in good shape. Just needs the rust cleaned off

$25 or best offer. Buyer to pay shipping or free pickup in Southern California.

IMG_0463.jpg

Does anyone recognise this magneto drive?

r-engines-parts-ford-ford.jpg

r-engines-parts-ford-ford (1).jpg

FS: A reproduction door for an E & J 1908 cowl lamp, right hand side, fits 1909-1912, and will work on 1913 and early 1914 lamps as well. This is a reproduction, however, there is a noticeable scratch in the glass; you can see it in the lower right corner in the first picture. If you can live with this, you can have this door for $25 not including...

Free (You Pay Shipping) used inlet and outlet castings pulled from junked radiator cores. A couple of them are OK, two of them are badly pitted and will have to be brazed. They are yours, just pay shipping.

tradcs02.jpg

Or if you prefer, here's a couple of rough brass-bodied Kingston carburetors, one's an L the other's an L4 if I'm not...

For sale: early fan bracket with Ford script and part number T604 in very good condition $30 plus shipping

4 Good rollers 100$ for all, plus shipping. Can be delivered to the Mother Load swap meet in Auburn, CA June 1.
928.699.4841

I have a set of Dayton wheels that I am going to use on my 26 speedster. The pins were really worn and there was some wear to the holes. To fix this I made new slightly larger pins and cut the holes to fit. To make sure I cut the holes in the right position, I made a jig that aligned to the center of the wheel and placed the holes in the right...

All,

I got permission from Suzanne to post this information. Bud Williams has retired. Suzanne Williams (Bud's daughter) and her son, Aaron, are now running the business.

Rocky Mountain Brake Co.
612 Willoughby Ln.
Stevensville, MT. 59870

NEW Rocky Mountain Brakes and parts can be purchased by calling Suzanne at 406-802-4658 or through email at...

Title says it all. Prefer an original set.
Anybody willing to sell??
Dennis

9leaf spring bolts. 25.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20250523_104145918.jpg you IMG_20250523_104206490.jpg

One of the mount holes is gone. 5.00 plus shipping. ctleonard64@gmail.com IMG_20250523_103703730.jpg IMG_20250523_103703730.jpg IMG_20250523_103717671.jpg IMG_20250523_103709934.jpg

Victor model 2 bucket in very good condition. No dents or dings. 30.00 plus shipping. ctleonard64@gmail.com IMG_20250523_102555154.jpg IMG_20250523_102610919.jpg IMG_20250523_102604586.jpg IMG_20250523_102625281.jpg

For Sale: A complete tool kit for the F model Fordson Tractor.
These are hard to find in my neck of the woods.

$450 includes shipping.

fordson tool kit.jpg

fordson tool kit drawing.jpg

Very usable set of boards .Has a small roll in one back corner. Believe it will come right back out. No extra holes anywhere. Shipping is so crazy we'll call it 50.00 for the pair plus shipping. A really good deal. The holes are still square. ctleonard64@gmail.com IMG_20250522_130822245.jpg IMG_20250522_130802527.jpg IMG_20250522_130822517.jpg...

Selling for a friend...very long tow strap.
Multiple possibilities. MAY be able to deliver to Homecoming with another friend. $50 plus a ride if not delivered. PayPal or check. Reply to email from profile pls. Thanks.

Beede & Sterling test meters for Mag. & Amp. $25 each or $45 for both + shipping. Tested & work.
IMG_3591.jpg
Craig.

We will be having a T parts swap meet on Monday evening July 21 during the 68th MTFCI tour.
This will be a totally free swap meet at the Doubletree Hilton hotel in Owatonna, Minnesota. This has been a popular feature of these tours over the past several years so grab your surplus parts, your wish list and come enjoy the evening. Car games and...

I am still looking for one more Gets Manufacturing spark plug. All you spark plug collectors, here is a chance to make some money!