MTFCA Forum

This is a really cool tail light. Probably 1913-1923ish. Approximately 5 by 5 . Spade mounting. Door opens to get to the bulb. Original ruby rear lens. Super original, complete, excellent original nickel plating, correct and good lenses. Great condition. Definitely for a quality car. Price is 145.00 including FedEx Ground including insurance in...

Wtb a strobo coil tester
If you have one you wish to part with please let me know. Thank you

For sale: Coil box in very good condition. $125 plus postage
20220607_092909.jpg 20220607_092949.jpg

For sale: very good motor mount with Ford script on bar, cap and side $75 plus postage
20230316_143408.jpg 20230316_143440.jpg 20230316_143454.jpg

Three tires just off my Model T: 2, 30X3.5 and one, 30X3 Lincoln made in USA. Good tread. They are oldies, but maybe someone can use them for free. Pick-up in 19382 (southeast PA).

Phil

IMG_1868.jpeg 3 tires.jpg Tire Label.jpg

FS: Set of Hassler single pancake shocks for the front. Includes two spring mounts, two springs, and two arms. These look like they can be restored without too much trouble, the holes for the shackle bolts aren't all wallowed out. Asking $225 not including shipping.

thpsf03.jpg

thpsf01.jpg

thpsf04.jpg

Thanks for looking!

Looking for large, early, brass SOLAR headlight. 1 or a pair. Fair to good quality.

Thanks, Chris

For sale: Wooden firewall $50 plus postage
20251119_125445.jpg 20251119_125500.jpg

For sale: door latch $25 plus postage
20220528_181441.jpg

I have 3-4 , 26-7 coil boxes in excellent condition, $125 each plus shipping, very light surface rust. They will clean up nice, send e-mail with contact cell phone # for pictures and questions. Thanks , Dennis

New Old Stock burner for gas headlamps, in original box. $85 includes domestic 48 state shipping.
Contact me thru MTFCA messaging system email.

Pair of TT Hyatt bearings both measure .562 abouts cages are tight both have some surface rust from sitting around comes with one sleeve. $130 shipped lower 48

Well I found parts and put my 26 pickup together before the Mtfca existed, now I see things that did not get done. It has not ran in 55 or so years but it is paid for.
Yesterday I needed some decorations that were on the left side of it and the best way to get to them was to slide under it. Started under and grabbed the wishbone and I could shake...

Very nice original Ford script oil can and mounting brkt. $150.00 plus shipping.

Fully machined ready to assemble with your innards
No rivet 6 rivet and 12 clamshell hidings. Starting at $2750 USD

2 pair 1913-15 Made in USA hubcaps. New. $20 each post paid
One single. $15 Or the 5 for $75 post paid
Edwards. 705 828 5405

Set of 4 hub cover spinning’s. Christmas special $200 post included

Looks to
Be an original headlight Tim 1915-16 one inner clip required. $50 post included

One new front panel 1911-13. Ford script only
One original front panel with “Made in USA”
One new front side trim. All 3 pieces $100
Edwards.705 828 5405

One new front panel 1911-13. Ford script only
One original front panel with “Made in USA”
One new front side trim. All 3 pieces $100
Edwards.

Selling still for a friend. '24 & '26 head but they can be used on any engine right? Someone needs one for winter engine rebuild! Reduced to $75 each plus the ride. Email me thru the profile. Thanks.

For sale: new side curtain rods (2) $20 plus postage
20220926_180802.jpg
side curtain clips $2 each plus postage

Cowl gas tank does not leak solder has been touched up round the outlet. Over flow tube is broken off at the outlet Decent looking usable tank $200 plus the ride or local pick up pleasant prairie wisconsin can sell you the straps for an additional 50$

For sale: New Parts still in bags. T*2545-M small steel cup -w-zerk $7
T-2825 09/27 6 hub bolt nuts $16.50
T-3272-L Laminated Mag Coil Shims 4 pcs. $7.50
T-6210-12 Float Valve & Seat $20
These numbers are from Antique Ford
314-575-7115 for pictures
All prices are plus postage

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Iron body holley g for parts or rebuild 50$ pulse the ride

Brass holley g body steel bowl 35$ plus the ride for parts a restore

I have 3 Schrader 777 stems and 1 Dill TR3 stem, bridge washers and nuts. The dill is the same size as the 777 stems. Not perfect but hardware does thread on them.

$100 plus shipping.

IMG_4264.jpeg

WTB top bow irons for a 1915 touring car

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $200.00 plus shipping. Lang’s 1-800-872-7871

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$250.00 plus shipping. Lang’s 1-800-872-7871

New drag links not being produced anymore.
1909-10 fine thread. $325 slight surface rust.
1911-13 course thread. $325 powder coated.
1913-16 pinned. $225 powder coated.
All plus freight. IMG_4568.jpeg IMG_4570.jpeg IMG_4571.jpeg

For Sale 13 early front hubs. 3 are not machined for speedo gear $80 each. Others that are machined $50 each.Steve 701 212 5009

For sale: #332of 2500 made Franklin Mint assembly line to commemorate Ford's 100th anniversary. Excellent condition, with certificate of authenticity.
Asking $650.00, shipping included to lower US. Always open to offers.

Hood former and fire wall for a 15 16. Not super pretty but workable 70$ plus the ride

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

For Sale. Horn pictured. I think? brass bell was 15 only. No idea if it works. Bell has lots of small dents.$100. Steve 701 212 5009

For Sale mag horn pictured. No idea if it works. $40. Steve 701 212 5009

I’m looking for a pair of rear hubs for a later set of demountable wheels

Castings for the dash rail on 1903-04 Ford. $400 pr.
Rear door sill plate for 1903-04 Ford tonneau. $200. IMG_4558.jpeg

IMG_4600.jpeg
Dash rail also fits 1903 Cadillac.
IMG_4607.jpeg

An assortment of early distributor coils. Price for all $50.00 plus actual shipping. Mark Chaffin (951)805-0928

20251209_085241.jpg

for sale: Ford script #T 604 fan bracket $15 plus postage

314-575-7115 for pictures

WTB Horn button bracket for 1922 touring.
If possible with the switch and button.
Thanks Larry

Left the comfort of Florida's version of 58 degree cold to brave Ohio's snow & ice 10 degree version this past week.
I just wanted to thank all the Ohio T folks I met this week for their very warm hospitality, specifically Joe Bell, Bill Reep and Nathan Fahrni. (Tim Wrenn, sorry I missed you this trip!!)
Being in the area, I just had to make a...

LOOK AWAY, this is not a Model T part it is for the Model A.

One New Old Stock Starter Gear Drive for the early 1928 Ford Model A using the Abel Drive starters. This will only fit the original, unmodified Abel drive-type starters, not any of the other/later Model A starters. I have an early 1928 Model A with the Multi-Disc Clutch and the correct...

120 years ago today the Ford Motor Company held an emergency board meeting. The reason? To compose a letter demanding treasurer and board director A. Y. Malcomson resign. He secretly put together a competing company, Aerocar, and the Detroit newspapers had just reported on the company and Malcomson’s role as President and majority owner of the new...

Spun brass hub covers
4 pc set. $250 shipping included. Pics on request. Eric Edwards
New Double Twist horn lHD $375 post included.
Edwards 705 828 5405

WTB looking for a friend: Horn button assembly (including mounting bracket) for a 1922 Touring Car. If you have one available, please message me price and particulars though the forum. Thanks in advance.

Bob
rls120

For sale: frame and glass for 3 windows on top $45 plus postage

call 314-575-7115 for pictures

For sale: Brass bonnet for E&J 656 $25 plus postage

call 314-575-7115 for pictures

Original coil tester good condition $150.00

Ed aka #4

For sale: Brass Holley carb needs rebuilt and missing float $50 plus postage
call 314-575-7115 for pictures

For sale: set of lettered pedal pads don't appear to have been used $30 plus postage
also 3 plain pedal pads appear not used $30 plus postage
314-575-7115 for pictures

For sale: like new leather holder and strap for crank $15 plus postage
snap on crank pin $5 plus postage
call 314-575-7115 for pictures

Not the prettiest 10 tooth pinion in the world; however, still usable. Price is $25.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251205_140307.jpg

Completely disassembled and cleaned, new float, float valve, venturi and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed, test run. $235 postpaid to continental USA email: wlkma9@gmail.com

One very nice used rear axle differential $100.00 plus $18.50 shipping. Mark Chaffin (951) 805-0928

20251204_141451.jpg

20251204_141512.jpg

Brinze Vertical crank handle holder holds the crank handle in vertical position $92. Post included

I'm going to be shifting some things around in the shop, so if i can re-home this soon...
Otherwise, everything gets buried until i'm bored.
No title. I wanted to build a pig 'n ford type racer.
Super nice frame. Clean, painted, lovely. (I drilled out the rivets, and removed the running board supports, but they are here.)
Numbers are present.
'27...

Crack free. Dual port intake OHV Chevy. adapter plate required
Complete with rocker train. Valves removed $750 shipping included to lower 48 and Canada. 705 828 5405
Edwards

Early reproduction Horn Rim and Screen for 1913-14 brass horns. Originally retailed for $89.95. Now available for $69.50 plus shipping
Lang’s 1-800-872-7871

I have 4 30X3.5” tires with cracks. 2 Firestone H
And 2 Wards Riverside. The Wards tires are only a couple years old but were cracked all over. Corker and Snyder’s stepped up and replaced them (see pics) very grateful to them both !
I can get pics of the Firestones if needed, but they all have good tread, just cracked and not roadworthy. $20ea and...

I am looking for a good Turtle Deck Lid for a 26/27 Runabout. If anyone has one please let me know. I am in Denver Colorado. You can call me at 720-322-4496.
Thanks,
Allen Fistell

For sale: vaporizer $50 plus postage

20220920_190200.jpg

For sale: Brass Kingston L 1916 carb $350 plus postage
20220806_105131.jpg 20220806_105259.jpg

In El Paso, IL.

Mark your calendar.

Registration forms are out.

Tin----Lizzy----one one seven at yahoo dot com (ignore the dashes)

These are only top rings. 16 total. I have no other information about these other than what is listed on the packaging.
These were in a Federal Mogal packaging
Labeled .043-4.065
Top Rings from R10393t65 or R10393x65 ?

These came from Sam Ciprianos estate
25$ plus shipping

IMG_4227.jpeg IMG_4226.jpeg IMG_4228.jpeg

$15 plus shipping.

IMG_4224.jpeg IMG_4225.jpeg

Hodgepodge of hardware. Drilled bolts, machine screws, studs, nuts etc. $10 for all plus shipping.

IMG_4221.jpeg

New in packaging $40 plus shipping
IMG_4220.jpeg

New in packaging- $25 plus shipping

IMG_4218.jpeg IMG_4219.jpeg

New in box. $15 plus shipping

IMG_4215.jpeg IMG_4216.jpeg IMG_4217.jpeg

New in box $10 plus shipping

IMG_4213.jpeg IMG_4214.jpeg

New in packaging. $20 plus shipping

IMG_4211.jpeg IMG_4212.jpeg

For the improved Ford. Price is $40.00 plus $18.50 shipping. Mark Chaffin (951)805-0928

20251203_161333.jpg

Modified inner clutch drum with eight notches instead of six like the stock T. Likely for use with the Turbo 400 or Watt's clutch pack design. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251203_153723.jpg

20251203_153735.jpg

Looking for someone to help get a T running north of Cinci Ohio, The truck was the original truck of the 105 year old company, a grand daughter would love to see it out and about again. It is a little far for me right now but I know it has been kept in dry storage all these years. Thanks Joe Bell 419-618-1025

FS price drop. I have original Ford Model T key numbers 55, 58, 61, 63, 66, 67, 69, and 70. A couple are nickel plated the rest are brass. All are Ford script except numbers 55 and one of the 61s (I have a couple of 61s) Price is $15.00 each.

Ed aka #4

FS I have original Ford Model T key numbers 55, 58, 61, 63, 66, 67, 69, and 70. A couple are nickel plated the rest are brass. All are Ford script except numbers 55 and one of the 61s (I have a couple of 61s) Price is $25.00 each.

Ed aka #4

Need 1 buckle for an SR mother in law seat. Have straps etc just missing one of the buckles that mount on the back of the body

Jim IMG_0548.JPG

For sale: 4 dip crankcase pan lower cover $50 plus postage
20241119_132330.jpg

Set of 2 deep brass turned hub covers and set of 2 shallow covers for the rears Custom turned In the 70s For that splashy brassy Speedster $275 post included.
Last of the new double twist horns. $375
705 828 5405
Eric Edwards

An assortment of new goodies. Retail value is $125+. Get everything shown for $70.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20251202_135348.jpg

For sale: like new sleeve puller $20 + still has label with #2509 SP
spare tire clamp $10 +
NEW in package T-3063 X Manifold gaskets 1909-27 $3 +
Like new manifold clamps T-3065-E 1909-27 $5 each plus postage +
Oil pan supports $25 for pair plus postage
Motor braces $25 pr. plus postage
New mag spools $2 each or used $1 each plus postage
Pitman...

(Pending) oil pan support bracket. Pat. No.1397433. Two arms are 14-inches long and can easily fit in a tool box for a road trip. Brackets fit under the oil pan when assembled . Price $125 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

New black cotton covered commutator loom as original. $350 post included
1909-12 Double twist horn. Last of the batch from 2005
$375 USD
Eric Edwards 706 828 5405

Looking for a good, non leaking radiator for a 26/27 roadster

These all look new. 4 of them have brass nuts the other two don’t. If you see something you like shoot me an offer…
Thanks

IMG_4168.jpeg

If you see anything you like, shoot me an offer…
Thanks

I do not know what these came off. They were part of an antique car collection. Different styles. If you see something you like, shoot me an offer…
Thanks

IMG_4166.jpeg

On November 30, 1905, “_ _ IT HIT THE FAN.”

As the transcribed article below shows, this was the first the press learned that Ford Motor Co. co-founder (along with Henry Ford) Alexander Y. Malcomson was starting a new, competing automobile company. To add insult to injury, Malcomson had just been approved by the other directors on October 16th to...

Anyone have an original bb intake manifold?

Here is a new in box set of Scat King .010 Model A Rod Bearings. $15 plus shipping

IMG_4147.jpeg IMG_4148.jpeg IMG_4149.jpeg

(SOLD) original Stevens front axle fixture and pins. Threads are in great shape. Price $300 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale vintage Ford service hat. Price $75 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale early spark plug wrench (repro). Early 1909-1911 tool kit tool. Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Free magazines. You pay shipping!
Theyre neat but can't keep everything.
Late 50s and early 60s.
One has cover torn off.
Check preferred, no paypal.
20251129_133313.jpg

For Sale early spark plug socket (T 2178) and handle 1911-1913. Price $160 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For Sale early 1910-1911 hubcap wrench. Tool kit tool. Price $180 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt