Search found 882 matches

by Dropacent
Fri Sep 13, 2019 7:30 am
Forum: General Discussion Forum (started 2019)
Topic: Here I go again .... to OCF
Replies: 244
Views: 68546

Low BP, hypotension

Steve, That blood pressure reading is far from normal, and very concerning, at least to me. Normal is 120/80, and lower like that doesn’t mean better, far from it. If you are feeling weak and different in any way, you ought to pop in to a clinic along the way. You need your wits about you to navigat...
by Dropacent
Thu Sep 12, 2019 6:38 pm
Forum: Classifieds - Parts
Topic: Magneto ignition drive accessories for sale
Replies: 5
Views: 456

Re: Magneto ignition drive accessories for sale

The others are Matco ( magneto Corp of America) brand. You will see these marked Matco, Eisemann , Splitdorf and no markings at all. Can’t hardly see the writing when installed.
by Dropacent
Thu Sep 12, 2019 6:36 pm
Forum: Classifieds - Parts
Topic: Magneto ignition drive accessories for sale
Replies: 5
Views: 456

Re: Magneto ignition drive accessories for sale

Kevin, those are my new favorites. I’m not sure who made them but the internal spring loaded gears inside are identical to the Columbo or Apollo units.
by Dropacent
Thu Sep 12, 2019 2:44 pm
Forum: Classifieds - Parts
Topic: Magneto ignition drive accessories for sale
Replies: 5
Views: 456

4 remaining

These two are sold. Still have 4 to find homes for, to get my floor cleaned
98D8F6A9-BC34-4699-AA2A-DB234F8CB002.jpeg
by Dropacent
Thu Sep 12, 2019 1:53 pm
Forum: Classifieds - Parts
Topic: Magneto ignition drive accessories for sale
Replies: 5
Views: 456

Bosch DU4 mags

These are my personal favorites. Built like a brick sh*t house, they are just about bullet proof and made before planned obsolescence was even thought of. I have several that are all taken apart, cleaned, bead blasted, ready for simple reassembly. Comes with a copy of the original manual, and a grea...
by Dropacent
Thu Sep 12, 2019 1:46 pm
Forum: Classifieds - Parts
Topic: Speedster bling for sale
Replies: 0
Views: 362

Speedster bling for sale

Here is a nice piece of speedster bling without the complications. All brass or bronze construction, typical BOSCH quality. Front dash plate for the Bosch ignition system. No gut, but still glory ahead. $225 postpaid to your door. Nice item, hide a switch inside and impress your friends and associat...
by Dropacent
Thu Sep 12, 2019 12:55 pm
Forum: Classifieds - Parts
Topic: Magneto ignition drive accessories for sale
Replies: 5
Views: 456

Magneto ignition drive accessories for sale

I have way too many of these great magneto drive units. All complete, also have lots of mags. If you are ever thinking of a speedster project, ( who isn’t ? ) This can be a great ignition choice. Interested, let’s talk. Tmorsher@icloud.com , please no PMs ! 40415FAC-751A-4479-8B16-8B401769FB44.png 9...
by Dropacent
Thu Sep 12, 2019 12:31 pm
Forum: Classifieds - Parts
Topic: Original pair of track bars, speedster,race car accessory
Replies: 6
Views: 805

Re: Original pair of track bars, speedster,race car accessory

Thanks Joe, I know I’ve seen an ad for these, but this is the only one I had. These are similar, but I like the axle clamps on this set. Much easier than relying on the perch mount, and adding pressure there.
9C7218A6-F1D5-4293-8A0E-FF7AE3BB7FEB.png
by Dropacent
Wed Sep 11, 2019 9:45 pm
Forum: Classifieds - Parts
Topic: Original pair of track bars, speedster,race car accessory
Replies: 6
Views: 805

Original pair of track bars, speedster,race car accessory

Offered here is an original pair of accessory track bars. These take the place of the wishbone, and saves the trouble of splitting the wishbone. Great scarce original era accessory, shown is the right hand side. Makes the front axle adjustable , gives you real bonafides, and also 6C045D02-B6C8-4844-...
by Dropacent
Wed Sep 11, 2019 12:17 pm
Forum: General Discussion Forum (started 2019)
Topic: Here I go again .... to OCF
Replies: 244
Views: 68546

Brent & Nancy Mize

Great pictures, Steve. Thanks! One small correction, that isn’t Nancy Mize in your picture, but just one of the many dozens of lucky people that Brent drives around all weekend at the OCF. Here Is a picture of the real nurse Nancy, along with the Coil Doctor. D61A70AD-2967-4005-8C07-07069CD911DA.jpeg
by Dropacent
Tue Sep 10, 2019 10:48 pm
Forum: Classifieds - Parts
Topic: Bosch sidedrive magneto casting
Replies: 0
Views: 253

Bosch sidedrive magneto casting

Original Bosch side drive magneto casting $100 postpaid to your door. Tmorsher@icloud.com to reach me, thanks
C85A3455-9D4A-4AA6-86D2-36DC94F53817.jpeg
FB9ABA6C-AB79-4CDD-8472-045D4ED7954B.jpeg
by Dropacent
Mon Sep 09, 2019 12:40 pm
Forum: Classifieds - Parts
Topic: Henry Ford bust radiator ornament for sale
Replies: 20
Views: 2974

Re: Henry Ford bust radiator ornament for sale

#5 is gone , so I’m halfway through this project . #6 is available now. Tmorsher@icloud.com to discuss. Thanks, t
by Dropacent
Sun Sep 08, 2019 10:07 am
Forum: Classifieds - Parts
Topic: Henry Ford bust radiator ornament for sale
Replies: 20
Views: 2974

Re: Henry Ford bust radiator ornament for sale

Duane, #5 is waiting for a new home. Tmorsher@icloud.com to reach me. Thanks!
by Dropacent
Sat Sep 07, 2019 10:00 am
Forum: Classifieds - Parts
Topic: TT truck tire rim, Kelsey 23”
Replies: 9
Views: 623

Re: TT truck tire rim, Kelsey 23”

I don’t know guys, I’m sure no authority on TT stuff. All I know is I’ve had 2 TT trucks over 40 years with rear wheels just like this spare rim. Perhaps it’s a regional thing, perhaps not. This would probably be a better discussion in the forum. Layden is an authority on wheels, and has helped me i...
by Dropacent
Thu Sep 05, 2019 9:44 pm
Forum: General Discussion Forum (started 2019)
Topic: EARLY MODEL T JACK
Replies: 7
Views: 704

Re: EARLY MODEL T JACK

Dean, I have two handles left from a small run I had done. They are on hold for a friend, but we haven’t made a connection yet, he may only take one. Drop me a line and I’ll send a pic and if it becomes available , you can decide then. Tmorsher@icloud.com
by Dropacent
Thu Sep 05, 2019 8:26 am
Forum: Classifieds - Parts
Topic: TT truck tire rim, Kelsey 23”
Replies: 9
Views: 623

Re: TT truck tire rim, Kelsey 23”

Uses this type of captive rim nut, Tom . There are better examples , but I found this picture quickly.
7E4C6900-171F-4996-B824-DC76C467BCBA.jpeg
by Dropacent
Wed Sep 04, 2019 3:37 pm
Forum: Classifieds - Parts
Topic: TT truck tire rim, Kelsey 23”
Replies: 9
Views: 623

TT truck tire rim, Kelsey 23”

Just a beautiful example of a 23” Kelsey lock ring rim, this is for the 33x5 or 32x4 1/2 tires, has been sandblasted and ready for a new home. The outside surface was just painted, no rust at all and is outstanding. The inside surface has light to medium pitting as you could expect. Way above averag...
by Dropacent
Sat Aug 31, 2019 10:17 pm
Forum: Classifieds - Parts
Topic: ACCESSORY Cross drive front plate magnetos for sale
Replies: 0
Views: 286

ACCESSORY Cross drive front plate magnetos for sale

I find myself with more of these great units than I will ever use. Planning a speedster project in the future, bad magneto in your ride and not up to pulling your motor, don’t want to fool with coils or distributor? I can fix you up. Lots of different makes, also have Bosch magnetos, impulse couplin...
by Dropacent
Sat Aug 31, 2019 8:05 pm
Forum: General Discussion Forum (started 2019)
Topic: New pre 1920 Screwdrivers
Replies: 24
Views: 1701

Re: New pre 1920 Screwdrivers

The shaft is square all the way stem to stern. That shows on the print, too. The much later , ( model A, v-8, ford tractor) screwdriver had round steel all the way through.
by Dropacent
Sat Aug 31, 2019 7:41 pm
Forum: Classifieds - Parts
Topic: FS Rebuilt Starters and Generators
Replies: 20
Views: 2547

Re: FS Rebuilt Starters and Generators

These starters of Henry’s are a thing of beauty. They work as nice as they look. If you snooze, you lose. Thanks again, Mr Lee !
by Dropacent
Sat Aug 31, 2019 7:37 pm
Forum: General Discussion Forum (started 2019)
Topic: New pre 1920 Screwdrivers
Replies: 24
Views: 1701

Re: New pre 1920 Screwdrivers

I’d say Tim has a good guess, and mine would be whatever would take dipped black paint without grain showing. Birch, maple , hickory, elm. I’m not sure ford had iron mountain maple when these were first made. ........looking at my original, it appears to be birch. In a rare moment of thinking of wha...
by Dropacent
Fri Aug 30, 2019 5:44 pm
Forum: Classifieds - Parts
Topic: 1912-13 drop forged STEWART speedo swivel
Replies: 1
Views: 349

1912-13 drop forged STEWART speedo swivel

Here is a dandy, and getting really tough to find. This is the drop forged Stewart speedometer drive swivel. Pretty sure these were used in 1912 and 1913 but please, do your research. I just spent 5 hours taking it all apart, cleaning out all the antique hardened grease. New thin fiber washers insta...
by Dropacent
Fri Aug 30, 2019 11:43 am
Forum: General Discussion Forum (started 2019)
Topic: Hand Brake extension
Replies: 14
Views: 896

Re: Hand Brake extension

Here Lies Jake, Grabbed Her Leg ‘stead Of The Brake !
by Dropacent
Fri Aug 30, 2019 11:14 am
Forum: General Discussion Forum (started 2019)
Topic: Hand Brake extension
Replies: 14
Views: 896

Re: Hand Brake extension

It’s easy to check if the NORWALK would work with your dash. Like I said , it only adds about 1/2” to the height when installed. Also, keep in mind that the brake lever itself is easily bent at the floor level, and this will give you a bit more legroom, and also clear the dash more.Whether you use a...
by Dropacent
Thu Aug 29, 2019 11:15 pm
Forum: Classifieds - Parts
Topic: TT wheel puller
Replies: 4
Views: 524

Re: TT wheel puller

It’s always worth putting a wanted ad on
by Dropacent
Thu Aug 29, 2019 11:15 pm
Forum: Classifieds - Parts
Topic: TT wheel puller
Replies: 4
Views: 524

Re: TT wheel puller

Long gone, sorry guys !
by Dropacent
Thu Aug 29, 2019 11:11 pm
Forum: General Discussion Forum (started 2019)
Topic: Hand Brake extension
Replies: 14
Views: 896

Re: Hand Brake extension

This is one installed in a friends 1926 Tudor Also, the original ad. Didn’t mean to steal the thread, just showing another option. This one can be easily moved from car to car, nothing to change, as you must do with the Grout. 334AE1B5-5991-4F39-A6DA-80BDC0052504.jpeg 2C4F35C5-79F3-46B0-BC16-B42E39F...
by Dropacent
Thu Aug 29, 2019 10:56 pm
Forum: General Discussion Forum (started 2019)
Topic: Hand Brake extension
Replies: 14
Views: 896

GROUT handbrake extension

This is the original GROUT handbrake extension. EF5A8721-669E-4E80-B5C2-8ED8C24B1C4E.jpeg We made and sold 100 reproductions of them before selling the business, but it wasn’t kept going. We still manufacture a flip style , the NORWALK , patterned after an original design. Lang’s and Snyder’s sell i...
by Dropacent
Thu Aug 29, 2019 10:42 am
Forum: Classifieds - Parts
Topic: New price, rajo oil gauge $150 ppd
Replies: 1
Views: 332

Re: New price, rajo oil gauge $150 ppd

Sold, thanks!
by Dropacent
Wed Aug 28, 2019 7:03 pm
Forum: General Discussion Forum (started 2019)
Topic: RAJO accessories
Replies: 3
Views: 534

Re: RAJO accessories

Bump......I’d like to see those, also Dave. I have several different types of funnel fillers I’ve not seen advertised.
by Dropacent
Wed Aug 28, 2019 1:23 pm
Forum: Classifieds - Parts
Topic: WTB: Schrader 777 valve stems/ hardware
Replies: 3
Views: 396

Re: WTB: Schrader 777 valve stems/ hardware

Stephen, I have one set of 5 NOS nuts left. I have an ad on the classified, take a look , thanks
by Dropacent
Tue Aug 27, 2019 1:30 pm
Forum: Classifieds - Parts
Topic: New price, rajo oil gauge $150 ppd
Replies: 1
Views: 332

New price, rajo oil gauge $150 ppd

Title says it all
by Dropacent
Tue Aug 27, 2019 1:21 pm
Forum: Classifieds - Parts
Topic: RAJO oil level gauge. Nice item, $175 ppd
Replies: 2
Views: 426

NEW PRICE $150 ppd. RAJO oil level gauge.

New price $150ppd. These are $225 now from the maker
by Dropacent
Tue Aug 27, 2019 12:50 pm
Forum: General Discussion Forum (started 2019)
Topic: Model T official sanctioned accessories
Replies: 1
Views: 486

Model T official sanctioned accessories

Our Canadian brothers and sisters had a bunch more accessory items available originally from Ford. Yes, even step plates. I’ve always believed what you do to take care of Lizzie is a personal choice, but this shows back in the original days, people dressed up their cars. I read the other day that by...
by Dropacent
Mon Aug 26, 2019 8:44 pm
Forum: Classifieds - Parts
Topic: Model A ford distributors w/ parts $75
Replies: 0
Views: 205

Model A ford distributors w/ parts $75

Some of you may have modern cars around, and could perhaps use this pile of distributor parts. Looks like enough to assemble a couple, no guarantees though. $75+ $15 toget it to your door. Tmorsher@icloud.com to reach me, thanks ! ,
by Dropacent
Mon Aug 26, 2019 7:46 pm
Forum: Classifieds - Parts
Topic: WTB - TT drive shaft and tube.
Replies: 3
Views: 273

Re: WTB - TT drive shaft and tube.

Preston, if you don’t find something closer, I have a NOS driveshaft, and a used shaft and torque tube available. Tmorsher@icloud.com to reach me
by Dropacent
Mon Aug 26, 2019 7:28 pm
Forum: Classifieds - Parts
Topic: Brass era accessory oil level gauge $135
Replies: 1
Views: 307

Brass era accessory oil level gauge $135

Original brass era model t accessory that attaches to the drain plug fitting at the bottom of the engine. The rest then mounts to one of the engine pan bolt holes. Neat indicator shows in the glass tube the oil level in the engine, Beautiful, very handy device. $135 + postage. Tmorsher@icloud.com to...
by Dropacent
Mon Aug 26, 2019 7:22 pm
Forum: Classifieds - Parts
Topic: RAJO oil level gauge. Nice item, $175 ppd
Replies: 2
Views: 426

RAJO oil level gauge. Nice item, $175 ppd

This is a well made reproduction of the RAJO oil level gauge. Easily mounts on a pan bolt hole behind the carb, and the brass fitting replaces the lower petcock . The indicator shows the oil level with getting out and getting under. $175 ppd to your door. Tmorsher@icloud.com No PMs please ! AF310630...
by Dropacent
Sun Aug 25, 2019 11:33 pm
Forum: General Discussion Forum (started 2019)
Topic: Cleaning Brass: An accidental discovery
Replies: 23
Views: 2557

Re: Cleaning Brass: An accidental discovery

Scott nailed it. Anytime you turn the brass red, you are stripping the zinc out. It would probably never make a difference on thick plumbing parts, but can be deadly on thin brass. Keep up that routine and you’ll be wondering why the brass has age cracks now. There is an old saying, if it sounds too...
by Dropacent
Sat Aug 24, 2019 12:15 pm
Forum: General Discussion Forum (started 2019)
Topic: Huge Kingston 5 Ball Carb
Replies: 1
Views: 460

Re: Huge Kingston 5 Ball Carb

Great video, Adrian. Thanks. These amazing original engines were built right here in northern Ohio 100+ years ago. Roberts also made a marine conversion engine based on model T . Look at the high tech shop needed to do it today. Wrap your head around making these with ancient machines and tools. Kid...
by Dropacent
Fri Aug 23, 2019 9:00 pm
Forum: Classifieds - Parts
Topic: For Sale: Used Original top and trim fasteners
Replies: 2
Views: 391

Re: For Sale: Used Original top and trim fasteners

I’ll take them, Jack. Email sent
by Dropacent
Thu Aug 22, 2019 8:40 pm
Forum: Classifieds - Parts
Topic: NOS schrader rim nuts for sale
Replies: 4
Views: 510

Re: NOS schrader rim nuts for sale

Just one set left. Tmorsher@icloud.com to get them heading your way. Thanks!
by Dropacent
Wed Aug 21, 2019 6:41 pm
Forum: Classifieds - Parts
Topic: WTB Buckeye Jack Handle
Replies: 3
Views: 454

Re: WTB Buckeye Jack Handle

I guess we will never know, Dave. I gotta think mine is long!
by Dropacent
Tue Aug 20, 2019 9:29 pm
Forum: Classifieds - Parts
Topic: WANTED : Bosch ammeter.
Replies: 0
Views: 212

WANTED : Bosch ammeter.

I’m looking for a ammeter with a Bosch logo on it. Same as pictured OR similar. Check your junk drawers, I will pay a very good price. Tmorsher@icloud.com to reach me, THANKS!
25B564E5-BF8B-41F1-B371-06E593D2D12B.jpeg
25B564E5-BF8B-41F1-B371-06E593D2D12B.jpeg (67.44 KiB) Viewed 212 times
by Dropacent
Tue Aug 20, 2019 9:23 pm
Forum: Classifieds - Parts
Topic: NOS schrader rim nuts for sale
Replies: 4
Views: 510

BETTER PICS. NOS schrader rim nuts for sale

Someone wanted to see better pics. These are 100+ years old, look like new. Nickel plated, these have a zinc or lead cone on the backside that centers them to the felloe. Some had leather originally ( which turns green from a brass stem )but some were like these beauties. The used ones available fro...
by Dropacent
Tue Aug 20, 2019 7:19 pm
Forum: Classifieds - Parts
Topic: WTB Buckeye Jack Handle
Replies: 3
Views: 454

Re: WTB Buckeye Jack Handle

What are the two lengths?
by Dropacent
Tue Aug 20, 2019 11:09 am
Forum: Classifieds - Parts
Topic: NOS schrader rim nuts for sale
Replies: 4
Views: 510

Re: NOS schrader rim nuts for sale

1 set sold. Get them while I have them! Tmorsher@icloud.com Sorry larry, I sold the knurled sets last winter
by Dropacent
Mon Aug 19, 2019 6:55 pm
Forum: Classifieds - Parts
Topic: Early riveted axle tube, $125 ppd
Replies: 0
Views: 262

Early riveted axle tube, $125 ppd

Original riveted axle tube. Want to put a Ruckstell under your oldie ? Put together the opposite side like it should be, don’t waste just one of your early axle halves. Rivet holes have been nicely filled. $125 ppd to your door. Tmorsher@icloud.com to reach me, thanks
by Dropacent
Mon Aug 19, 2019 6:50 pm
Forum: Classifieds - Parts
Topic: NOS schrader rim nuts for sale
Replies: 4
Views: 510

NOS schrader rim nuts for sale

I have 3 sets of 5 schrader rim nuts. These are for #777 or #888 metal valve stems. New, Old Stock condition. You will wear out a lot of shoe leather looking for these at a swap meet. $50 for set of 5, ppd to your door. Also have 2 sets of used, $30 per set, delivered. Tmorsher@icloud.com to reach m...
by Dropacent
Fri Aug 16, 2019 10:30 am
Forum: Classifieds - Parts
Topic: 1927 Model T Radiator Shell
Replies: 1
Views: 246

Re: 1927 Model T Radiator Shell

Joe, I have two coming in. If you email me, I can describe in detail when they get here. Tmorsher@icloud.com
by Dropacent
Thu Aug 15, 2019 10:36 am
Forum: Classifieds - Parts
Topic: 3 nice carbs, all for one price
Replies: 2
Views: 495

Re: 3 nice carbs, all for one price

Sold thanks!
by Dropacent
Thu Aug 15, 2019 12:30 am
Forum: General Discussion Forum (started 2019)
Topic: Running board step plates
Replies: 14
Views: 1067

Re: Running board step plates

Originals are out there, but kinda scarce. These have 8 1/2 “ wide mounting screws. I love them but they are glued on in case the next owner isn’t into fads. It’s my belief that owners back then really enjoyed dressing their cars up. If not, thousands of accessories would not have been manufactured ...
by Dropacent
Wed Aug 14, 2019 7:46 pm
Forum: Classifieds - Parts
Topic: Simmons super carb , nice complete, $100ppd
Replies: 0
Views: 273

Simmons super carb , nice complete, $100ppd

Good looking Simmons carb with all the heater element parts. Good solid looking carb, I’ve sold these for double this in same conditi9n. This one is $100 ppd to your door. Tmorsher@icloud.com to reach me. ECBC1E2F-CDD6-41DB-B1BB-983A07ED3C1E.jpeg AB0ED9B2-5F21-4742-8D3C-6C3EB611C47C.jpeg 5F9D3718-B0...
by Dropacent
Wed Aug 14, 2019 7:43 pm
Forum: Classifieds - Parts
Topic: 3 nice carbs, all for one price
Replies: 2
Views: 495

3 nice carbs, all for one price

Take a look , 3 good looking carbs. Condition unknown but they look pretty good. One has a broken mounting ear, other than that , pretty complete. $90 ppd to your door. Tmorsher@icloud.com E02EDAF3-258D-4BC8-B22C-FF1201F4099D.jpeg 57313BB5-C2C6-457E-8EC1-636216FF0083.jpeg 986E6314-826A-4516-9072-9C1...
by Dropacent
Wed Aug 14, 2019 7:36 pm
Forum: Classifieds - Parts
Topic: ORIGINAL accessory muffler outlet deflector for sale
Replies: 2
Views: 428

ORIGINAL accessory muffler outlet deflector for sale

Neat accessory cast iron 2 piece muffler exhaust deflector. This is in beautiful condition, it’s been beadblasted and powder coated. $50 ppd to your door. Tmorsher@icloud.com to reach me. Thanks! DD3CF466-1D52-4C42-94EB-12776286CC3C.jpeg 2FE7F17B-A582-4450-A08D-B7037231F434.jpeg 6AA0D243-41B4-4C8B-8...
by Dropacent
Wed Aug 14, 2019 7:27 pm
Forum: General Discussion Forum (started 2019)
Topic: What the heck is this?
Replies: 8
Views: 748

Re: What the heck is this?

Bay Bridge Sue got mine a month or so back, and asked the same question. Should be easy to find that thread, Mark.
by Dropacent
Wed Aug 14, 2019 3:59 pm
Forum: General Discussion Forum (started 2019)
Topic: Penny shims
Replies: 22
Views: 1843

Re: Penny shims

Larry, filing the caps will do nothing for an out of round ball, just make it wear out faster. Do you have some magical grease that will take up the void?
by Dropacent
Wed Aug 14, 2019 2:45 pm
Forum: General Discussion Forum (started 2019)
Topic: Penny shims
Replies: 22
Views: 1843

Re: Penny shims

Don, this another period fix. These, though, belong in a display cabinet . I’m sure there are some thrifty T owners that use them, and they are neat to see on farmyard type restorations. You will likely see grooves on original parts that are very worn out, this is what made the grooves. These were u...
by Dropacent
Wed Aug 14, 2019 2:08 pm
Forum: General Discussion Forum (started 2019)
Topic: Penny shims
Replies: 22
Views: 1843

Re: Penny shims

AND, if you are smart, put a small zerk or pin alemite fitting on it, and they will always be greased ! Just don’t let larry Smith see it.
by Dropacent
Wed Aug 14, 2019 2:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Penny shims
Replies: 22
Views: 1843

Re: Penny shims

Don, sadly, as often the case, “penny-wise and pound foolish “ REALLY applies here. For the purist, get good caps and rebuild your ball to round. Otherwise, actual era shims are readily available, and I’ll send you some if need be. These are for drag link ends and wishbone ball socket. They made aft...
by Dropacent
Wed Aug 14, 2019 12:57 pm
Forum: Classifieds - Parts
Topic: Thomas accessory distributor for sale
Replies: 2
Views: 453

Re: Thomas accessory distributor for sale

Sold to John, thanks!
by Dropacent
Wed Aug 14, 2019 7:01 am
Forum: Classifieds - Parts
Topic: Fancy brass oil site glass accessory
Replies: 1
Views: 431

Re: Fancy brass oil site glass accessory

Sold, thanks!
by Dropacent
Tue Aug 13, 2019 9:09 pm
Forum: Classifieds - Parts
Topic: Original accessory oil can mtg bracket / script can
Replies: 2
Views: 418

Original accessory oil can mtg bracket / script can

Nifty original spring loaded oil can accessory mounting bracket, along with a nice FORD script oil can. $95 ppd to your door. I’ll sell the nifty bracket alone for $65. Tmorsher@icloud.com to reach me. Thanks! BCE73826-E653-44C0-B1F8-5C6B1F8EBCF6.jpeg CDEFDAD2-363E-46B9-BD2B-3085F88F2624.jpeg C7565E...
by Dropacent
Tue Aug 13, 2019 9:06 pm
Forum: Classifieds - Parts
Topic: Fancy brass oil site glass accessory
Replies: 1
Views: 431

Fancy brass oil site glass accessory

Beautifully made original cast brass oil site glass. $55 ppd to your door. Tmorsher@icloud.com to reach me.
DA77125C-94B8-4732-ADE5-A1FDE929F3B8.jpeg
9679FA56-969B-4D70-B3AF-BDC3EEB4DFE6.jpeg
0D491B60-2450-48C1-B88C-10307257AF82.jpeg
by Dropacent
Tue Aug 13, 2019 9:04 pm
Forum: Classifieds - Parts
Topic: Original brass bow separators for sale
Replies: 1
Views: 314

Original brass bow separators for sale

Original set of 4 brass bow separators, $50 ppd to your door. Tmorsher@icloud.com to reach me.
5A108C7F-7411-4700-A1F0-3D7850132213.jpeg
1234F572-7D0B-414A-8348-788E6F858F36.jpeg
by Dropacent
Tue Aug 13, 2019 9:02 pm
Forum: Classifieds - Parts
Topic: Thomas accessory distributor for sale
Replies: 2
Views: 453

Thomas accessory distributor for sale

If you are a “distributor” person, why not be period correct. Check out the price of the VW one, and then read on. This is an original era accessory distributor setup for the model T. This beautiful example is of CAST IRON construction. ( beware of the potmetal ones). It has been nicely taken apart,...
by Dropacent
Tue Aug 13, 2019 8:25 pm
Forum: General Discussion Forum (started 2019)
Topic: 1924 ? Motor
Replies: 15
Views: 1157

Re: 1924 ? Motor

Great info , Tom. Now, I will be checking under your hood for that missing chrome plated manifold clamp
by Dropacent
Tue Aug 13, 2019 11:57 am
Forum: General Discussion Forum (started 2019)
Topic: 1924 ? Motor
Replies: 15
Views: 1157

1924 ? Motor

Here is an interesting picture from the Henry ford collections ( formerly Edison Institute) Notice anything?
51834271-0B63-4751-919A-DF64297F7BD4.jpeg
A9F5180B-06FE-460B-917B-D0A7DF6699A4.jpeg
by Dropacent
Mon Aug 12, 2019 8:38 pm
Forum: General Discussion Forum (started 2019)
Topic: What are these? Engine pan?
Replies: 2
Views: 577

What are these? Engine pan?

I have a couple of these that were wired to some engine splash pans. There is a stamped L on one. Note the dimple and I’m using my hand for size reference. Any idea if these are FORD ? Thanks for any help. Tmorsher@icloud.com
00904349-53E0-415C-8775-C4CB6F1D8858.jpeg
by Dropacent
Mon Aug 12, 2019 8:32 pm
Forum: Classifieds - Parts
Topic: Nice original pair of engine pans for sale
Replies: 1
Views: 429

Nice original pair of engine pans for sale

Nice rust free pair of original engine pans. Each has a small tear , shown by the white line. $75 + postage from 44857. Tmorsher@icloud.com to reach me, please no PMs
A5060382-2715-42E6-8065-57A8989B69D4.jpeg
80762913-04FA-4425-8B0B-4929B7DF183E.jpeg
by Dropacent
Sun Aug 11, 2019 8:59 pm
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

7D42E2D6-AFCC-416D-9E6E-52FBDD577BA3.jpeg Although advertising cuts are notoriously misleading, this one shows some writing on the top of the head, I presume raised letters of HIMICO. It doesn’t make sense they would be so conscious of branding on all their other parts and then not on the head. I g...
by Dropacent
Sun Aug 11, 2019 12:46 am
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

Thanks for the pics and all the other info. Looks like you could buy a kit or a complete remanufactured T engine with all their stuff on it. This is the nicest complete one I’ve ever seen, Tim
by Dropacent
Sun Aug 11, 2019 12:44 am
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

665CCFCC-E231-435B-9111-627E2A36A98F.jpeg
665CCFCC-E231-435B-9111-627E2A36A98F.jpeg (94.59 KiB) Viewed 1666 times
A19FF3AE-8196-41C9-B5D2-8A6B5A494382.jpeg
A19FF3AE-8196-41C9-B5D2-8A6B5A494382.jpeg (57.46 KiB) Viewed 1666 times
by Dropacent
Sat Aug 10, 2019 5:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

I’d love some detailed pics of your new motor. I think others would, too.
by Dropacent
Sat Aug 10, 2019 3:33 pm
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

Tim, he had a really nice complete one maybe 6-8 years ago, also. I’m still seeing a himico head in my brain. That was a fantastic engine you just got, great buy! I was very tempted.
by Dropacent
Sat Aug 10, 2019 1:44 pm
Forum: General Discussion Forum (started 2019)
Topic: Old Photo, Paddy Wagon
Replies: 5
Views: 707

Re: Old Photo, Paddy Wagon

Just had a friend pick up 3 of those demountable wheels yesterday. If anyone knows of another out there available , let us know. Thanks!
by Dropacent
Sat Aug 10, 2019 1:40 pm
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

Maybe I’m remembering the manifolds with raised HIMICO on them . Sorry, not much help
by Dropacent
Sat Aug 10, 2019 1:30 pm
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2016

Re: Himico Cylinder Head

Just ping from my poor memory, but I believe they had Himico in raised letters. If you search long enough you should be able to find a picture. Model T haven had a very complete engine not too long ago. Good luck, fascinating motors !
by Dropacent
Thu Aug 08, 2019 12:30 am
Forum: Classifieds - Parts
Topic: NRS engine water outlet casting for sale
Replies: 2
Views: 431

Re: NRS engine water outlet casting for sale

1 left. Tmorsher@icloud.com to put your name on it. Thanks
by Dropacent
Wed Aug 07, 2019 10:34 pm
Forum: General Discussion Forum (started 2019)
Topic: Babbitt Material
Replies: 15
Views: 1344

Re: Babbitt Material

BUT IT SAYS “GENUINE “. Thought I’d go fishing with that pic and I caught a big one !
by Dropacent
Wed Aug 07, 2019 4:11 pm
Forum: General Discussion Forum (started 2019)
Topic: Babbitt Material
Replies: 15
Views: 1344

Re: Babbitt Material

Here it is !
4E85E70C-7BCE-4D2A-A525-56348E1B412A.jpeg
[attachment=0]
by Dropacent
Tue Aug 06, 2019 4:15 pm
Forum: Classifieds - Parts
Topic: Henry Ford bust radiator ornament for sale
Replies: 20
Views: 2974

Re: Henry Ford bust radiator ornament for sale

Little Henry #4 has been adopted. Thanks. You know what comes next.
by Dropacent
Tue Aug 06, 2019 4:14 pm
Forum: Classifieds - Parts
Topic: Good T and TT tire , also rim
Replies: 1
Views: 289

Re: Good T and TT tire , also rim

TT tire is sold. I’ll post the rim separately. I’ll sell the two 30x3 for $50 together
by Dropacent
Tue Aug 06, 2019 2:40 pm
Forum: General Discussion Forum (started 2019)
Topic: New London New Brighton
Replies: 28
Views: 2669

Re: New London New Brighton

He is in northern Columbus, but I did give him your contact info awhile back. You shouldn’t have left the pitty out when he went by !
by Dropacent
Tue Aug 06, 2019 1:46 pm
Forum: General Discussion Forum (started 2019)
Topic: New London New Brighton
Replies: 28
Views: 2669

Re: New London New Brighton

Wifey and I were able to ride for a day with Rick and Clara about a dozen years ago. Caused the 2 cylinder bug bite in me.
by Dropacent
Tue Aug 06, 2019 1:42 pm
Forum: Classifieds - Parts
Topic: Good T and TT tire , also rim
Replies: 1
Views: 289

Good T and TT tire , also rim

I have a pretty nice Firestone 30x3 extra size clincher tire, good tread, probably %75+ or better , $50. I have a Goodyear 30x3 clincher, probably about the same tread, a little less supple than the Firestone, $25. Lastly, a real nice 23” TT rim with a Gillete 32 x 4 1/2 , under air, make a great sp...
by Dropacent
Tue Aug 06, 2019 1:27 pm
Forum: General Discussion Forum (started 2019)
Topic: New London New Brighton
Replies: 28
Views: 2669

New London New Brighton

I thought there were pics on here from the NLNB pre run, but couldn’t find them. Here is friend Rick Linder and Clara under speed. I’m surprised someone there in minnysoto has a high speed camera, so a great shot ! Perhaps the photo taker can take credit.
651C5E1B-5CDE-4026-88EF-FE45CBD0CB44.png
by Dropacent
Tue Aug 06, 2019 12:28 pm
Forum: Classifieds - Parts
Topic: Henry Ford bust radiator ornament for sale
Replies: 20
Views: 2974

Re: Henry Ford bust radiator ornament for sale

I’ve had several questions about these. Here are the answers. 1)The threads are cast into the piece, NOT machined. This is very difficult to accomplish. 2) the original artists signature and patent date have been removed. I apply a large number of production inside each one, where it’s not visible. ...
by Dropacent
Tue Aug 06, 2019 12:17 pm
Forum: Classifieds - Parts
Topic: Henry Ford bust radiator ornament for sale
Replies: 20
Views: 2974

Mt. Rushford. #4 needs a home

#4 is available for a new home. Tmorsher@icloud.com Easy payment plan available. Thanks
778E4BCD-D93E-4E6D-BB86-F95A9502352D.jpeg
by Dropacent
Mon Aug 05, 2019 4:08 pm
Forum: Classifieds - Parts
Topic: NRS engine water outlet casting for sale
Replies: 2
Views: 431

NRS engine water outlet casting for sale

We have only 3 of these left. If you have the father of the model T in your stable, you will someday need one of these. They sometimes look perfectly good from the outside, but the 110 year old aluminum can be paper thin. Beautiful aluminum casting should take you through this century, needs the hol...
by Dropacent
Mon Aug 05, 2019 1:29 pm
Forum: Classifieds - Parts
Topic: EDISON battery box for your running board
Replies: 5
Views: 688

Re: EDISON battery box for your running board

Length 17”. Height 10 1/4”. Depth 7”
by Dropacent
Mon Aug 05, 2019 12:40 pm
Forum: Classifieds - Parts
Topic: EDISON battery box for your running board
Replies: 5
Views: 688

Re: EDISON battery box for your running board

Working key ! Still available