Search found 338 matches
- Fri Jan 14, 2022 11:43 am
- Forum: Classifieds - Parts
- Topic: FS 1913/14 Rear Axle Housings
- Replies: 1
- Views: 981
FS 1913/14 Rear Axle Housings
I have 2 left hand housings, nice, $20 each. I can deliver to Tulare in April.
- Fri Jan 14, 2022 11:41 am
- Forum: Classifieds - Parts
- Topic: FS 1911 Steering Column. SOLD
- Replies: 1
- Views: 867
FS 1911 Steering Column. SOLD
Nice 1911 steering column, $575. I can deliver this to the Tulare swap meet in April.
SOLD
SOLD
- Fri Jan 14, 2022 11:39 am
- Forum: Classifieds - Parts
- Topic: FS 1911 Fore Door Set
- Replies: 3
- Views: 1568
FS 1911 Fore Door Set
Very nice and solid set of 1911 Fore Doors, also for early 1912 before the slab side. No rust, no dents, solid wood, latches and brackets. Asking $750. I can deliver them to the Tulare swap meet in April.
- Mon Nov 15, 2021 10:28 am
- Forum: General Discussion Forum
- Topic: Magneto Problem
- Replies: 24
- Views: 3127
Re: Magneto Problem
By chance is your problem after washing your car? I had something similar, and I didn't tie it together with car washing for some time. My symptom was running rough intermittently. One afternoon after washing the car I got shocked when I touched the coil box; turned out I had a carbon trace in the w...
- Mon Oct 18, 2021 12:47 pm
- Forum: General Discussion Forum
- Topic: Interacting with Model Ts with disability
- Replies: 14
- Views: 2791
Re: Interacting with Model Ts with disability
My father's '15 Roadster was modified with hand controls and a starter in the late 1980's. I've posted pictures of them before on this forum, and there was a write up in the HCCA Gazette. I've still got them. He had MS and needed 2 canes to walk. They extended the time he could drive the T by a numb...
- Mon Sep 27, 2021 6:18 pm
- Forum: Classifieds - Parts
- Topic: Antique Clothing PICKED UP
- Replies: 2
- Views: 1428
Re: Antique Clothing PICKED UP
These have found a home.
- Wed Sep 22, 2021 10:48 pm
- Forum: General Discussion Forum
- Topic: High Compression Head
- Replies: 23
- Views: 2942
Re: High Compression Head
I’ve been running domed pistons with stock low heads, on 5 or 6 engines, for years. I used to run aluminum HC low heads, but chose to go back to the cast iron heads with domed pistons and don’t see any degradation; it’s a great combination.
- Wed Sep 22, 2021 10:44 pm
- Forum: Classifieds - Parts
- Topic: Antique Clothing PICKED UP
- Replies: 2
- Views: 1428
Antique Clothing PICKED UP
I’ve got a large box of old clothes that my parents wore in the HCCA. Most of these were my moms; she was short, between 5-1 and 5-3, and average size, not heavy at the time. I’d like to pass these on to someone that will use them. Some are true antiques, some are from the 60’s and were made for day...
- Wed Aug 25, 2021 6:31 pm
- Forum: Classifieds - Parts
- Topic: Headlight Burner Bases and Elbows. SOLD
- Replies: 0
- Views: 820
Headlight Burner Bases and Elbows. SOLD
Pair of repop gas burner bases and E&J elbows, every nice condition, just need cleaning and to be sprayed with matt-black again. $50 plus shipping.
SOLD
SOLD
- Wed Aug 25, 2021 6:23 pm
- Forum: Classifieds - Parts
- Topic: Loose Ruckstell Guts SOLD
- Replies: 1
- Views: 977
Loose Ruckstell Guts SOLD
I think this P159 bellhousing looks good, and it still has the thrust pins in it. The P160 needs to be rebushed. The surfaces on the P-141 appear excellent, possibly resurfaced already .(I'm pretty sure it's that part, it looks like it...). The pins and gears are appear worn but they are included. $...
- Wed Aug 25, 2021 6:12 pm
- Forum: Classifieds - Parts
- Topic: Various Tools
- Replies: 6
- Views: 1753
Re: Various Tools
Dan; he had me ship to Chaffin's, to have his items put with his car.
- Wed Aug 25, 2021 2:52 pm
- Forum: Classifieds - Parts
- Topic: MORE Assorted Parts #2
- Replies: 1
- Views: 814
Re: MORE Assorted Parts #2
Valve lifter wrench; this is my last one $30 SOLD Valve Wrench.jpg Pile of wrenches $15 Wrenches.jpg Valve covers. Not the thick ones but pretty flat and nicely embossed $15 Valve Covers.jpg Speedometer face with re-plated and polished rim $25 Speedometer Face.jpg NOS Pan ball Socket $15 SOLD Pan So...
- Wed Aug 25, 2021 2:28 pm
- Forum: Classifieds - Parts
- Topic: MORE Assorted Parts #2
- Replies: 1
- Views: 814
MORE Assorted Parts #2
Pan reinforcement pair, nice and flat, not pitted $25
Sight glass $5
Sold Pending Payment
1915-16 Hood Former bolts, painted with Centari. $15
SOLD
Sight glass $5
Sold Pending Payment
1915-16 Hood Former bolts, painted with Centari. $15
SOLD
- Wed Aug 25, 2021 1:46 pm
- Forum: Classifieds - Parts
- Topic: Early Door Latch, Right Rear
- Replies: 1
- Views: 850
Re: Early Door Latch, Right Rear
New price is $50.
This is a nice latch set, and the bent corner is easy to straighten.
This is a nice latch set, and the bent corner is easy to straighten.
- Wed Aug 25, 2021 1:44 pm
- Forum: Classifieds - Parts
- Topic: Various Tools
- Replies: 6
- Views: 1753
Re: Various Tools
The group of wrenches in the top is now $15.
I still have one valve lifter left.
I still have one valve lifter left.
- Wed Aug 25, 2021 1:36 pm
- Forum: Classifieds - Parts
- Topic: Magneto Bulbs, in box
- Replies: 2
- Views: 997
Re: Magneto Bulbs, in box
New prices:
The TITANs are now $60
The US Bulbs are now $50.
I will sell both boxes together for $100 plus shipping.
The TITANs are now $60
The US Bulbs are now $50.
I will sell both boxes together for $100 plus shipping.
- Wed Aug 25, 2021 1:33 pm
- Forum: Classifieds - Parts
- Topic: Running Board and Top Iron Brackets
- Replies: 1
- Views: 833
Re: Running Board and Top Iron Brackets
I'll sell the entire group for $20 plus shipping.
- Wed Aug 25, 2021 1:32 pm
- Forum: Classifieds - Parts
- Topic: 1911 Door Handle Pair SOLD
- Replies: 2
- Views: 996
1911 Door Handle Pair SOLD
This is a nice pair of 1911 door handles, ready to install. It's a very nice set.
Price is $150 plus shipping
SOLD
Price is $150 plus shipping
SOLD
- Sun Aug 22, 2021 8:32 pm
- Forum: Classifieds - Parts
- Topic: WTB AC Brake Equalizer
- Replies: 6
- Views: 2378
Re: WTB AC Brake Equalizer
I've sent you a couple of emails and haven't heard back; I don't know if you've received them. You might want to check your spam folder. If they are not not there you should check the email in your profile; someone else I was responding to had an old email still listed that they don't use.
- Thu Aug 19, 2021 7:18 pm
- Forum: Classifieds - Parts
- Topic: Early Door Latch, Right Rear
- Replies: 1
- Views: 850
Early Door Latch, Right Rear
This latch operates but needs to be cleaned and lubed. One corner is bent; it's an easy fix but I'll let the buyer do that.
$50 plus shipping
$50 plus shipping
- Thu Aug 19, 2021 11:49 am
- Forum: Classifieds - Parts
- Topic: MORE Assorted Parts
- Replies: 2
- Views: 1038
Re: MORE Assorted Parts
Seat Belts. I used a pair of these in my '15 when we had young kids. They're just basic, black belts, unused. $10 SOLD Pending Payment Seat Belts.jpg Low Speed Notch set. Nice and sharp original pair. $10 SOLD Low Gear Cam.jpg Low Gear Cam_2.jpg Speedometer Face, clean, good glass and gasket, rim ha...
- Thu Aug 19, 2021 11:31 am
- Forum: Classifieds - Parts
- Topic: MORE Assorted Parts
- Replies: 2
- Views: 1038
MORE Assorted Parts
Starter block off plates, bead blasted and painted with cast blast. $15 per set SOLD Cover Plate Sets.jpg Group of light parts, $30 SOLD Light Parts.jpg Moto Meter, not broken but I don't know if it works, $15 SOLD MotoMeter.jpg 2 piece valve covers. These aren't thick, but they have very nice embos...
- Thu Aug 19, 2021 11:19 am
- Forum: Classifieds - Parts
- Topic: Nice early spindle set, /11-'16 SOLD
- Replies: 0
- Views: 717
Nice early spindle set, /11-'16 SOLD
Very nice threads, no damage on them at all. Round at the bearings, straight. I don't see a forging mark, but these were primed when I got them and I haven't stripped them.
Price is $75 plus shipping
SOLD
Price is $75 plus shipping
SOLD
- Thu Aug 19, 2021 11:10 am
- Forum: Classifieds - Parts
- Topic: Running Board and Top Iron Brackets
- Replies: 1
- Views: 833
Running Board and Top Iron Brackets
The running board brackets are bent and there is pitting, but they're easy enough to straighten and you can fill the heavy pits easily with a MIG welder or brazing if you want to. Price is $15 plus shipping Running Board Brackets.jpg Running Board Brackets.jpg Running Board Brackets_3.jpg Top iron b...
- Thu Aug 19, 2021 11:04 am
- Forum: Classifieds - Parts
- Topic: 14-16 Front Fender Brackets SOLD
- Replies: 0
- Views: 625
14-16 Front Fender Brackets SOLD
Front fender brackets, 14-16. Nice. Some wear from the front hangers, but these are nice and straight.
$100 plus shipping SOLD
$100 plus shipping SOLD
- Thu Aug 19, 2021 10:42 am
- Forum: Classifieds - Parts
- Topic: Various Tools
- Replies: 6
- Views: 1753
Re: Various Tools
Norrie;
The valve lifter can go USPS Flat Rate for $8.55.
Please email me, see contact information above
The valve lifter can go USPS Flat Rate for $8.55.
Please email me, see contact information above
- Wed Aug 18, 2021 10:26 pm
- Forum: Classifieds - Parts
- Topic: Various Tools
- Replies: 6
- Views: 1753
Re: Various Tools
Adding Contact
- Wed Aug 18, 2021 10:25 pm
- Forum: Classifieds - Parts
- Topic: Various Tools
- Replies: 6
- Views: 1753
Various Tools
Assorted wrenches $15 Wrenches.jpg Valve Lifters. You'll need to bend the 'S' that goes over the manifold clamp, but that's easy. These are a good roadside tool to have. $30 each BOTH SOLD Valve Lifters.jpg ZIM Valve Seat Cutter set, excellent condition, doesn't look used $35 SOLD Valve Seat Cutter_...
- Wed Aug 18, 2021 10:18 pm
- Forum: Classifieds - Parts
- Topic: Magneto Bulbs, in box
- Replies: 2
- Views: 997
Re: Magneto Bulbs, in box
US - Bulbs:
- Wed Aug 18, 2021 10:16 pm
- Forum: Classifieds - Parts
- Topic: Magneto Bulbs, in box
- Replies: 2
- Views: 997
Magneto Bulbs, in box
I have two boxes; each is mostly full but not completely. The TITAN box is deteriorating quite a bit, but the wrappers inside are good. There are 10 wrappers with 8 bulbs. Price is $70 plus shipping The US Bulbs box is separated at the folds, and has 7 wrapped bulbs. The price is $60 plus shipping ....
- Wed Aug 18, 2021 10:10 pm
- Forum: Classifieds - Parts
- Topic: NOS Spindle Bolt Set SOLD
- Replies: 0
- Views: 697
NOS Spindle Bolt Set SOLD
NOS Spindle bolt set with flip top oilers. One is clearly marked Ford. Light tape marks and dirt, but these will clean up nice,
Price is $50 plus shipping.
SOLD
Price is $50 plus shipping.
SOLD
- Wed Aug 18, 2021 10:04 pm
- Forum: Classifieds - Parts
- Topic: Brass Horn; 1915 Standard SOLD
- Replies: 1
- Views: 693
Re: Brass Horn; 1915 Standard
Adding Contact Information
- Wed Aug 18, 2021 10:04 pm
- Forum: Classifieds - Parts
- Topic: Brass Horn; 1915 Standard SOLD
- Replies: 1
- Views: 693
Brass Horn; 1915 Standard SOLD
This 'Standard' brand has a decent screen, and the diamond shaped bracket used in '15. Light denting, but a decent original horn.
Price is $100 plus shipping
SOLD
Price is $100 plus shipping
SOLD
- Wed Aug 18, 2021 9:59 pm
- Forum: Classifieds - Parts
- Topic: Watts Clutch Set SOLD
- Replies: 0
- Views: 719
Watts Clutch Set SOLD
Used under 300 miles, early style, spring measures 123#, with modified push ring.
$75 plus shipping
SOLD
$75 plus shipping
SOLD
- Wed Aug 18, 2021 11:14 am
- Forum: Classifieds - Parts
- Topic: 2 available …Gasket board project for sale READY TO SHIP !
- Replies: 10
- Views: 3019
Re: Gasket board project for sale
What are the finished dimensions?
- Mon Aug 16, 2021 12:00 pm
- Forum: General Discussion Forum
- Topic: Additional Pics: Rock Solid 1911 Steering Column Rivets
- Replies: 13
- Views: 2584
Re: Looking for someone to ‘re-solid-rivet’ my brass steering column
Post some pictures showing how your rivet set and backing are set up, it sounds interesting.
- Sun Aug 15, 2021 7:54 pm
- Forum: Classifieds - Parts
- Topic: Low Head, no Made in USA SOLD
- Replies: 1
- Views: 816
Re: Low Head, no Made in USA
Adding contact information
- Sun Aug 15, 2021 7:54 pm
- Forum: Classifieds - Parts
- Topic: Low Head, no Made in USA SOLD
- Replies: 1
- Views: 816
Low Head, no Made in USA SOLD
Good low head, removed from running engine. Cylinder 1 was smoothed for clearance with high compression pistons. Small braze fill at front of water jacket; I had no leaks with this. Surfaced. Nice and clean inside. Nice head, I just don't need it. Low heads without the Made in USA are difficult to f...
- Sun Aug 15, 2021 9:01 am
- Forum: Classifieds - Parts
- Topic: Brand new Ruckstell Kit
- Replies: 2
- Views: 1385
Re: Brand new Ruckstell Kit
Bump to top
- Sun Aug 15, 2021 9:01 am
- Forum: Classifieds - Parts
- Topic: 1911 Fore Door set
- Replies: 4
- Views: 1288
Re: 1911 Fore Door set
Bump to top
- Sun Aug 15, 2021 9:00 am
- Forum: Classifieds - Parts
- Topic: 1911 Steering Column
- Replies: 2
- Views: 1037
Re: 1911 Steering Column
Bump to top
- Sun Aug 15, 2021 8:53 am
- Forum: Classifieds - Parts
- Topic: Large drum rear end, wire wheel hubs. SOLD pending payment.
- Replies: 2
- Views: 896
Re: Large drum rear end, wire wheel hubs
I'll keep this in mind, but I don't expect I can get it there.
- Sat Aug 14, 2021 4:24 pm
- Forum: Classifieds - Parts
- Topic: Large drum rear end, wire wheel hubs. SOLD pending payment.
- Replies: 2
- Views: 896
Large drum rear end, wire wheel hubs. SOLD pending payment.
I have a 26/27 large drum rear end with wire wheel hubs. No driveshaft (there is a cover plate over the hole) or radius rods, and the emergency brakes cams are cut short. Baking plates look nice and straight. asking $200, I think the wire wheel hubs are worth that. Located near Ventura, CA, local pi...
- Thu Aug 12, 2021 11:00 pm
- Forum: Classifieds - Parts
- Topic: 1911 Fore Door set
- Replies: 4
- Views: 1288
Re: 1911 Fore Door set
I just found a post of an ‘11 with a set of these doors installed, I’m adding it here to show how these look installed.
- Thu Aug 12, 2021 2:32 pm
- Forum: Classifieds - Parts
- Topic: Brand new Ruckstell Kit
- Replies: 2
- Views: 1385
Re: Brand new Ruckstell Kit
Price lowered tp $2,250.
- Thu Aug 12, 2021 2:32 pm
- Forum: Classifieds - Parts
- Topic: 1911 Fore Door set
- Replies: 4
- Views: 1288
Re: 1911 Fore Door set
Price lowered to $825
- Thu Aug 12, 2021 2:31 pm
- Forum: Classifieds - Parts
- Topic: DB Axle; SOLD
- Replies: 1
- Views: 1115
Re: DB Axle
Price lowered to $275
- Thu Aug 12, 2021 2:30 pm
- Forum: Classifieds - Parts
- Topic: 1911 Steering Column
- Replies: 2
- Views: 1037
Re: 1911 Steering Column
Price lowered to $675
- Mon Aug 09, 2021 6:05 pm
- Forum: Classifieds - Parts
- Topic: 1911 hub cap set SOLD
- Replies: 2
- Views: 1026
Re: 1911 hub cap set
Sold! Thank you John!
- Mon Aug 09, 2021 3:02 pm
- Forum: Classifieds - Parts
- Topic: Brand new Ruckstell Kit
- Replies: 2
- Views: 1385
Brand new Ruckstell Kit
I have a brand new Ruckstell kit. The housing is a small drum and is machined for a closed spool. I have the later style, long nose shift lock with this, which added $150 to the cost of the kit (it's worth it!). New from Chaffin's now this would cost $2,650 plus the housing exchange (and sales tax i...
- Mon Aug 09, 2021 2:45 pm
- Forum: Classifieds - Parts
- Topic: 1911 hub cap set SOLD
- Replies: 2
- Views: 1026
1911 hub cap set SOLD
Repop hubcaps, nice set. I've replaced them with originals.
$50 plus shipping.
$50 plus shipping.
- Mon Aug 09, 2021 2:42 pm
- Forum: Classifieds - Parts
- Topic: New brake drum with shaft SOLD
- Replies: 0
- Views: 666
New brake drum with shaft SOLD
This is a brand new 'early' brake drum. The shaft is riveted in and the bushings have been installed. It comes with new shoes.
$350 plus shipping.
$350 plus shipping.
- Mon Aug 09, 2021 2:40 pm
- Forum: Classifieds - Parts
- Topic: 1911 Fore Door set
- Replies: 4
- Views: 1288
1911 Fore Door set
The metal and wood are solid and the original lining is present on driver's side. I think all of the major hardware and screws are present; the latch plate and passenger sill post brackets are here as are the rear brackets for the driver's side and a top one for the driver's side. I don't see a brac...
- Mon Aug 09, 2021 2:33 pm
- Forum: Classifieds - Parts
- Topic: DB Axle; SOLD
- Replies: 1
- Views: 1115
DB Axle; SOLD
This looks good, it has early perches.
$325 plus shipping.
SOLD
$325 plus shipping.
SOLD
- Mon Aug 09, 2021 2:31 pm
- Forum: Classifieds - Parts
- Topic: 1911 Steering Column
- Replies: 2
- Views: 1037
1911 Steering Column
Nice 1911 column, 23-1/2" length. This looks very good. I'm including a slightly later lower block.
$725 plus actual shipping.
$725 plus actual shipping.
- Wed Mar 10, 2021 7:28 pm
- Forum: General Discussion Forum
- Topic: Donation Report
- Replies: 0
- Views: 685
Donation Report
Some of you are aware that your shopping at Amazon can support the club if you select MTFCA as a charity on smile.amazon .com. Here is the text from informational report I received today: To date $634 has been donated. On my person report I see my purchases have generated $45 of this (I buy a lot on...
- Wed Aug 26, 2020 6:02 pm
- Forum: General Discussion Forum
- Topic: wood spoke paint?
- Replies: 6
- Views: 2021
Re: wood spoke paint?
I used a regular oil based primer, like you would use for the wood on your home. Use black, not white! After sanding that I shot them with a single stage automotive enamel. That has plenty of flex, it won't crack.
- Mon Jul 27, 2020 9:43 pm
- Forum: General Discussion Forum
- Topic: TT Racing.
- Replies: 55
- Views: 12838
Re: TT Racing.
Dallas;
You’re around Kendalville, aren’t you? I’m wondering what road you were on and where, I’m usually in that area visiting family a few times a year. All of my wife’s family is in NE Indiana. Their last name is Bontrager..... sorta like Smith in most places!
That really was a great story!
You’re around Kendalville, aren’t you? I’m wondering what road you were on and where, I’m usually in that area visiting family a few times a year. All of my wife’s family is in NE Indiana. Their last name is Bontrager..... sorta like Smith in most places!
That really was a great story!
- Mon Jul 20, 2020 7:25 pm
- Forum: General Discussion Forum
- Topic: What mods are required for closed spool Ruckstell....?
- Replies: 4
- Views: 2006
Re: What mods are required for closed spool Ruckstell....?
I have seen two ways of using a Ruckstell housing on an early rear end. One was to machine the recess so the lip of the spool fits over the housing. My neighbor did this on the one I put in my '15. It took some setup but worked very well. The other was to grind 1/2 of the lip off of the spool so it ...
- Sun Jul 19, 2020 5:55 pm
- Forum: Classifieds - Parts
- Topic: SCAT crank and rods
- Replies: 3
- Views: 2033
Re: SCAT crank and rods
Sold pending payment
- Sun Jul 19, 2020 2:05 pm
- Forum: Classifieds - Parts
- Topic: SCAT crank and rods
- Replies: 3
- Views: 2033
Re: SCAT crank and rods
I just opened the box to take these pictures
- Sun Jul 19, 2020 1:13 pm
- Forum: Classifieds - Parts
- Topic: SCAT crank and rods
- Replies: 3
- Views: 2033
SCAT crank and rods
I have a new SCAT crank that is standard but manufactured with the rods at -.010; it is still in the box, and a new set of balanced SCAT rods. I bought it from SCAT this way. Thats almost perfect, 10 thousands makes no difference on a stock or near stock engine, and saves you $200 plus tax for the c...
- Sat Jul 18, 2020 2:35 pm
- Forum: General Discussion Forum
- Topic: Volvo overdrive ?
- Replies: 29
- Views: 7621
Re: Volvo overdrive ?
Mark; I'll drop this after this last comment..... as a certified welder there is no way in hell I'd accept that weld; it doesn't even have adequate (meaning full) reinforcement, which is one of the fundamental basics of welding. No quality professional welder would ever accept or provide a weld like...
- Fri Jul 17, 2020 2:15 pm
- Forum: General Discussion Forum
- Topic: Volvo overdrive ?
- Replies: 29
- Views: 7621
Re: Volvo overdrive ?
I know this was mentioned above, but that is a terrible weld. If you use this it needs to be redone.
- Thu Jul 09, 2020 1:47 pm
- Forum: Classifieds - Parts
- Topic: 13/14 rear end housings
- Replies: 6
- Views: 2910
Re: 13/14 rear end housings
Bump to top
- Tue Jul 07, 2020 9:38 am
- Forum: Classifieds - Parts
- Topic: 13/14 rear end housings
- Replies: 6
- Views: 2910
Re: 13/14 rear end housings
Give me a call or send an email Matt, they’re here.
- Mon Jul 06, 2020 11:48 pm
- Forum: General Discussion Forum
- Topic: Trans cover
- Replies: 5
- Views: 2567
Re: Trans cover
Also in 15 the reinforcing ribs appeared near the bolt holes.
- Mon Jul 06, 2020 12:01 pm
- Forum: Classifieds - Parts
- Topic: 13/14 rear end housings
- Replies: 6
- Views: 2910
Re: 13/14 rear end housings
Thanks Hank! I thought so, they're a nice set
- Sun Jul 05, 2020 9:53 pm
- Forum: Classifieds - Parts
- Topic: 13/14 rear end housings
- Replies: 6
- Views: 2910
Re: 13/14 rear end housings
Still available, I can chase the pinion spool bolt holes for you if you don't have the special tap.
- Sun Jul 05, 2020 9:52 pm
- Forum: Classifieds - Parts
- Topic: Small Drum Ruckstell Housing SOLD
- Replies: 1
- Views: 1396
Re: Small Drum Ruckstell Housing
I chased the spool bolt threads and the shift lock threads and packed this up for shipping. The backing plate is good, holes aren't wobbled out and the threads in the baking plate are nice and sharp. It appears to be a nice, just dirty, housing.
- Fri Jul 03, 2020 8:06 pm
- Forum: Classifieds - Parts
- Topic: Small Drum Ruckstell Housing SOLD
- Replies: 1
- Views: 1396
Small Drum Ruckstell Housing SOLD
Small drum housing, it needs to be cleaned and sand blasted. $175 plus shipping, or I can take this to Davis, CA (near Sacramento) later this month but it needs to be paid in advance.
- Fri Jul 03, 2020 8:03 pm
- Forum: Classifieds - Parts
- Topic: 13/14 rear end housings
- Replies: 6
- Views: 2910
13/14 rear end housings
These look good, and the backing plates are good. $150, pick up in south CA. I'm going to Davis, near Sacramento CA, later this month. I can take them with me if that helps but they need to be paid in advance.
- Fri Jul 03, 2020 7:59 pm
- Forum: Classifieds - Parts
- Topic: April 1925 Engine SOLD
- Replies: 0
- Views: 1260
April 1925 Engine SOLD
Complete engine with manifolds, NH carburetor, Ford Faithful. Turns over, not frozen, was stored covered. I haven't pulled all of the plugs but the one I did pull for the lifting ring looked great. The brake pedal was cut short. This has the late style bolts between the hogs head and block, and a 4 ...
- Fri Jul 03, 2020 7:53 pm
- Forum: Classifieds - Parts
- Topic: Small Drum Ruckstell SOLD
- Replies: 0
- Views: 1220
Small Drum Ruckstell SOLD
Complete rear end. Shift locks moves and everything turns. Rear wheels need new wood but the demountable rims are there and aren't sharp. I have not had it open. You'll need to pick this up or arrange transport, I'm in southern CA. I will be making a trip to Davis (near Sacramento) later this month;...
- Sat Jun 27, 2020 5:18 pm
- Forum: General Discussion Forum
- Topic: Installing balance beads
- Replies: 13
- Views: 4866
Re: Installing balance beads
I tried using a vibrating engraver; it worked but was painfully slow. I now do them after cutting off the rubber stem, prior to installing the metal one. It's quick and easy.
- Tue Jun 23, 2020 7:40 pm
- Forum: Classifieds - Vehicles
- Topic: FS: 1925 Durant Star Roadster Model F
- Replies: 6
- Views: 4690
Re: FS: 1925 Durant Star Roadster Model F
If someone buys this I have two spare engines they can have for it! Definitely enough parts to build a solid spare, plus some pieces left over!
- Thu Jun 18, 2020 9:52 am
- Forum: General Discussion Forum
- Topic: Accident today
- Replies: 41
- Views: 9942
Re: Accident today
Contact your own insurance and let them deal with the other one. The 35% sounds like BS.
- Wed Jun 17, 2020 2:42 pm
- Forum: Classifieds - Parts
- Topic: Non-demountable wheels needed.
- Replies: 4
- Views: 2050
Re: Non-demountable wheels needed.
Hi Chris
I just sent you an email, I think I've got what you need. I'm in Camarillo.
I just sent you an email, I think I've got what you need. I'm in Camarillo.
- Tue Jun 16, 2020 4:36 pm
- Forum: Classifieds - Parts
- Topic: Star Engines
- Replies: 1
- Views: 1470
Star Engines
I started a post in OT, but it doesn't get as much traffic there. Not Ford, but I want to find a home for these; the price is right if you're working on a Star! There are two engines, one with a 23 casting date, the other is 24. Both are very near complete. One has the block busted up with freeze cr...
- Tue Jun 16, 2020 3:28 pm
- Forum: OT - Off topic
- Topic: Star Engines
- Replies: 3
- Views: 2101
Re: Star Engines
So far we've saved 4 chassis, 2 trailer loads and about 10 truck loads of parts, mostly T,A, late 30s Ford, some Buick and some Dodge. We're down to the last few bits... this is one I'd really like to find a home for!
- Tue Jun 16, 2020 8:48 am
- Forum: OT - Off topic
- Topic: Star Engines
- Replies: 3
- Views: 2101
Star Engines
Not Ford, but I want to find a home for these. There are two engines, one with a 23 casting date, the other is 24. Both are very near complete. One has the block busted up with freeze cracks, the other has a pulley on it for a stationary engine. It sure looks like enough to build one good engine. I’...
- Mon Jun 15, 2020 1:56 pm
- Forum: General Discussion Forum
- Topic: Who uses 30 x 3 clinchers?
- Replies: 30
- Views: 8227
Re: Who uses 30 x 3 clinchers?
I run them on the front
- Mon Jun 15, 2020 1:54 pm
- Forum: Classifieds - Parts
- Topic: FS Nice Old 8 Day Rim Wind Clock
- Replies: 6
- Views: 2522
Re: FS Nice Old 8 Day Rim Wind Clock
Hi Hank.
I checked the number in the email, it's got the correct number. Please try again. I'll be out of coverage for about 30 minutes sometime early afternoon, otherwise it should be fine.
I checked the number in the email, it's got the correct number. Please try again. I'll be out of coverage for about 30 minutes sometime early afternoon, otherwise it should be fine.
- Mon Jun 15, 2020 10:28 am
- Forum: Classifieds - Parts
- Topic: FS Nice Old 8 Day Rim Wind Clock
- Replies: 6
- Views: 2522
Re: FS Nice Old 8 Day Rim Wind Clock
Hi Hank
I haven't heard back from you, I'm still interested in this. Hopefully you received my email.
Gary
I haven't heard back from you, I'm still interested in this. Hopefully you received my email.
Gary
- Sat Jun 13, 2020 9:38 am
- Forum: Classifieds - Parts
- Topic: FS Nice Old 8 Day Rim Wind Clock
- Replies: 6
- Views: 2522
Re: FS Nice Old 8 Day Rim Wind Clock
I've sent an email through the system link, hopefully it has the same address as on your note!
Gary
Gary
- Thu Jun 11, 2020 2:44 pm
- Forum: General Discussion Forum
- Topic: Adding alternator to 1917 T
- Replies: 12
- Views: 3774
Re: Adding alternator to 1917 T
You really don't need to do the alternator. I put a starter on my '11. I use a 6V Optima battery. I bought a Battery Tender; the connection is a pig tail about 12" long that hangs below the rear seat (you can barely see it). I can drive my car for days, always use the starter, and I don't have to ch...
- Wed Jun 10, 2020 6:38 pm
- Forum: Classifieds - Parts
- Topic: TT rear ends, free
- Replies: 5
- Views: 2579
Re: TT rear ends, free
The person who owns the property doesn't want people dismantling assemblies in the yard. Someone would need to take them as is.
- Wed Jun 10, 2020 9:31 am
- Forum: Classifieds - Parts
- Topic: TT rear ends, free
- Replies: 5
- Views: 2579
Re: TT rear ends, free
I agree, that's why the owner is willing to give them to someone who wants them. I've found homes for a model A chassis and truck of model A stuff, 2 Buick chassis plus a trailer of other Buick stuff, and I've brought a bit home. We've made progress but there's still a Dodge chassis and a number of ...
- Tue Jun 09, 2020 7:49 pm
- Forum: Classifieds - Parts
- Topic: TT rear ends, free
- Replies: 5
- Views: 2579
TT rear ends, free
There's a 1918 TT rear end and a TT Ruckstell. Both are complete and have external brakes. You can have them, but you've got to pick them up quickly, preferably by the weekend. You'll need to be able to load them. I don't know the date they'll be scrapped, but I know it will be by the middle of next...
- Mon Jun 08, 2020 3:28 pm
- Forum: General Discussion Forum
- Topic: What is this?
- Replies: 10
- Views: 3656
Re: What is this?
Tom; The phone number you emailed for your friend is disconnected. I've put these up on the AACA site as well. All someone has to do is remove them, if they want to donate something to the grand kid's college fund that's great but not required. You've got to remove the entire undercarriage, it's not...
- Mon Jun 08, 2020 2:36 pm
- Forum: General Discussion Forum
- Topic: Dome pistons with Low Head?
- Replies: 5
- Views: 2231
Re: Dome pistons with Low Head?
I've done this in 4 engines. Only one needed a little flap disking in one cylinder for the head to lie flat on the block without a gasket. I haven't tried a 09-10 head, but my '11 is runnung an early 11 head with this. The other heads have been in the '14 and up variety.
- Mon Jun 08, 2020 2:26 pm
- Forum: General Discussion Forum
- Topic: What is this?
- Replies: 10
- Views: 3656
Re: What is this?
Terry;
This is about to be scrapped. Sure you don't want it? There is some sheet metal that may be for it.
This is about to be scrapped. Sure you don't want it? There is some sheet metal that may be for it.
- Mon Jun 08, 2020 10:38 am
- Forum: General Discussion Forum
- Topic: What is this?
- Replies: 10
- Views: 3656
Re: What is this?
Tom; it's in Southern CA. Best is to email me.. The price is right, but you've only got a few days.
- Sun Jun 07, 2020 9:59 pm
- Forum: General Discussion Forum
- Topic: What is this?
- Replies: 10
- Views: 3656
Re: What is this?
Thank you Dick! There’s another 6 cylinder Dodge next to this, I don’t know the year. I wouldn’t have thought a car that late would have open valves, but who knows.... there doesn’t seem to be any way there could have been a cover, what with the pushrods running up the outside of the block. The 4 cy...
- Sun Jun 07, 2020 8:57 pm
- Forum: General Discussion Forum
- Topic: What is this?
- Replies: 10
- Views: 3656
What is this?
I know it's not Ford, but it appears to be early and large, at least that's what we think based on the aluminum engine case and open valves. It is 6 cylinder and it is definitely a large car. The springs are huge..... I need to identify this and find someone that wants it ASAP. Everything in the yar...
- Tue Jun 02, 2020 1:16 pm
- Forum: Classifieds - Parts
- Topic: 1911/ 12 parts?
- Replies: 1
- Views: 1445
Re: 1911/ 12 parts?
It's an awesome project, if I had space I'd buy it! Unfortunately I only have a 2 car garage....
- Tue Jun 02, 2020 10:19 am
- Forum: OT - Off topic
- Topic: Looking for contacts; Buick and Star
- Replies: 2
- Views: 1904
Re: Looking for contacts; Buick and Star
Thank you! I followed the link for the Star and actually found a name of someone I know, I'll contact them. Next up is the Buick..... Gotta save these from the scrapyard!
- Mon Jun 01, 2020 7:54 pm
- Forum: OT - Off topic
- Topic: Looking for contacts; Buick and Star
- Replies: 2
- Views: 1904
Looking for contacts; Buick and Star
I'll put a copy of this on the OT page, but that doesn't seem to be read as much.... I need to find people interested in, or involved with, Buick and Star vehicles. These are probably from the 30's. I'm in the southern CA area. If you know someone involved with these cars please ask them to contact ...
- Mon Jun 01, 2020 7:54 pm
- Forum: General Discussion Forum
- Topic: Looking for contacts' Buick and Star
- Replies: 3
- Views: 2045
Looking for contacts' Buick and Star
I'll put a copy of this on the OT page, but that doesn't seem to be read as much.... I need to find people interested in, or involved with, Buick and Star vehicles. These are probably from the 30's. I'm in the southern CA area. If you know someone involved with these cars please ask them to contact ...
- Wed May 27, 2020 5:58 pm
- Forum: General Discussion Forum
- Topic: Brass brazing rods
- Replies: 18
- Views: 5410
Re: Brass brazing rods
If you can't find the rivet you need locally then go to McMaster Carr's website, they've got pretty much everythnig in the way of fasteners and they're fast and reasonable to ship.