MTFCA Forum

No cracks no corrosion $250. Edwards 705828 5405

only missing 2 from each end - the rest is 100% useable

I bought this Ford Faithful from Chaffins when they started reproducing them. When my motor was rebuilt I went with a high flow oiler. This little unit worked great until then though! You will need to supply a new copper line. I also drilled a very small hole through the screen plate....otherwise it held oil and made a mess during oil changes....

This is an equalizer from the vendors to turn large drum brakes into service brakes. I switched to Rockies when putting a new rearend on.

The threaded rod is bent and the bracket has been ground a little to clear the hogs head (the tap welded to my pedal wasn't square, hence the shade treework around).

$70.00 including shipping in the US with...

Completely disassembled and cleaned, new float with viton tipped float valve conversion,excellent throttle shaft with throttle shaft bushings installed, test run. $425 postpaid to continental USA email: wlkma9@gmail.com

NWS predicts 86 F on Christmas Day, with 90 F for the day after. Snow? Unlikely, to say the least.

On this day before the night before Christmas, I thought this a touching clip. Clara Ford wrote this letter just before Christmas to a close friend. She wrote of the loss of her husband of many years, Henry Ford. For anyone watching, I hope it brings a tear, a smile, and a sense of Christmas past. Merry Christmas

Click below to see the video at...

tailight and bracket Needs red celluloid lense $45 plus shipping

Original round gastank brackets. $30 or. Edwards 7005 828 5405

Rust free pair cast end radius rods with good threads. $125
Plus shipping. Edwards 705 828 5405

1909-10 front top pivots. Original. Excellent $125 or
1909-10 Headlamps firksxrecast. Unmachibed $100 or
1909-10 sidelamps brackets bronze recasts $75 or
1909-10 recast bronze dash to frame brackets $75 or
Edwards 795 828 5405

Last of the batch from 2005 New Double Twist left hand drive horn
$375 post included
Rubber bulbs large $50
Correct small bulbs $50
Edwards 705 828 5405

1912-18 Steel steering spider with double keyway and refinished wood rim $125 Edwards 705 828 5405

Nice clean mag horn. $50 nice clean bell $25.
Edwards. 705 828 5405

New Assessory brass spinnings to dress up your brass T speedster 6inch covers front and rears. Christmas Special. $250 post included to lower 48 and Canada. Edwards. 705 828 5405

silicon steel castings
centres pressed into original tubes and backing plates. Fully machined ready for your factory original insides. No more rivet leaks. No drooping
Machinework to original specs .This is the last available pair . $2750 USD. Immediate delivery Call for further details Eric Edwards
705 828 5405

Pair of New Old Stock burners for gas headlamps, still in original boxes, 100+ years old. $109 for the pair including domestic 48 state shipping.
Respond thru MTFCA messaging system email.

New CNC steel rear tapered or straight hubs. For NRS
$500 us a pair.

New Double twist horn with slight bump on bezel ( not a dent with kink) Christmas special Easy repaired $250.
Edwards. 705 828 5405

Here is a link to a very large, interesting and diverse website:
www.UtterPower.com
High tech, low tech, and lots more.

Set of 4 used Firestone non skid 28x3 tires. Still pretty flexible. $400 plus shipping. Kdmks AT att.net.

Three horns for restoration sold as one lot $40 plus $18.50 shipping. Mark Chaffin (951) 805-0928

20251219_093527.jpg

Bennet Brake parts assortment. Price is $150 plus shipping. Mark Chaffin (951)805-0928

20251219_093933.jpg

20251219_094028.jpg

These are made by Chaffin's, about 10 years old. Either forged or cast steel, they have a nice ring to them when tapped. Been sitting on the shelf, never used.

I am missing some nuts for them. Clean them up and they are ready to use. Over $400 new.

$300 plus shipping

Stephen 314-287-1901

FS 1913 (only) Ford Script Sill Plate sold each. These are fine quality older reproductions made 30 plus years ago. Mounting holes need to be drilled as seen in the photos. Only 2 available SOLD Lang’s 1-800-872-7871

I need a carbide generator body doesn't need to be complete just need the shell to size antitarnish covers I'm makes looking for cheap and crappy or free could trade for anti tarnish cover for carbide gen. Let me know what you have

One pair of complete Ford headlights with green shaded lenses and speedster (modified) mounting brackets. Price is $75 plus domestic shipping. Mark Chaffin (951)805-0928

20251217_142711.jpg

20251217_142729.jpg

One set of round gas tank brackets $35 plus $18.50 shipping. Mark Chaffin (951)805-0928

20251216_142721.jpg

SOLD! Six Model A/B C-4 spark plugs. Four are NOS in their worn original Ford boxes. The fifth one is NOS without a box. The sixth is in excellent condition. Price is 145.00 for six including shipping via FedEx Ground in the USA. I do not check messages here so call me at 734-730-4274 or email directly at motoringicons@hotmail.com. Thanks.

Complete 2 port OHV with rocker train
Valves already removed
No cracks. $450. Plus shipping
Edwards 705 828 5405

2 pair round gas tank brackets $30 plus post
Edward 705 828 5405

Round lipped reflectors. One of each. $50 post included edwards 705 828 5405

Christmas special. $50 post included bonus brass sidelamps rim. [

Pair recast 1909-10 headlamp forks and other brackets.
Includes dash to frame brackets and other pcs
Edwards 705 828 5405

3 nice rust free pit free mag horns and one horn bell.
$125 for all 4 pcs or $50 ea

Edwards 705 828 5405

refinished wood steering wheel with double keyed steel steering spider. $125 post included
Edwards 795 828 5405

Pit free with good threads $150 pr plus shipping
Edwards 705 828 5405

2 pair new made in USA brass hub caps plus one single
5 pcs $65 post included
Edwards 705 828 5405

One new 1911-12 brass rad top tank front panel. new.
One original 1913-15 brass rad top top tank front panel
Take your pick $75post included
Both for $100
Christmas special
Eric Edwards 705 828 5405

Drums are both bad good for the hub 15$ each plus the ride

I dont know the correct term springy things bandaids anti rattle springs? $10 for the pairs $5 for the singles plus the ride

Sold! This is a really cool tail light. Probably 1913-1923ish. Approximately 5 by 5 . Spade mounting. Door opens to get to the bulb. Original ruby rear lens. Super original, complete, excellent original nickel plating, correct and good lenses. Great condition. Definitely for a quality car. Price is 145.00 including FedEx Ground including insurance...

Wtb a strobo coil tester
If you have one you wish to part with please let me know. Thank you

For sale: Coil box in very good condition. $125 plus postage
20220607_092909.jpg 20220607_092949.jpg

Three tires just off my Model T: 2, 30X3.5 and one, 30X3 Lincoln made in USA. Good tread. They are oldies, but maybe someone can use them for free. Pick-up in 19382 (southeast PA).

Phil

IMG_1868.jpeg 3 tires.jpg Tire Label.jpg

Looking for large, early, brass SOLAR headlight. 1 or a pair. Fair to good quality.

Thanks, Chris

For sale: Wooden firewall $50 plus postage
20251119_125445.jpg 20251119_125500.jpg

For sale: door latch $25 plus postage
20220528_181441.jpg

New Old Stock burner for gas headlamps, in original box. $85 includes domestic 48 state shipping.
Contact me thru MTFCA messaging system email.

Pair of TT Hyatt bearings both measure .562 abouts cages are tight both have some surface rust from sitting around comes with one sleeve. $130 shipped lower 48

Well I found parts and put my 26 pickup together before the Mtfca existed, now I see things that did not get done. It has not ran in 55 or so years but it is paid for.
Yesterday I needed some decorations that were on the left side of it and the best way to get to them was to slide under it. Started under and grabbed the wishbone and I could shake...

Very nice original Ford script oil can and mounting brkt. $150.00 plus shipping.

Fully machined ready to assemble with your innards
No rivet 6 rivet and 12 clamshell hidings. Starting at $2750 USD

2 pair 1913-15 Made in USA hubcaps. New. $20 each post paid
One single. $15 Or the 5 for $75 post paid
Edwards. 705 828 5405

Set of 4 hub cover spinning’s. Christmas special $200 post included

Looks to
Be an original headlight Tim 1915-16 one inner clip required. $50 post included

One new front panel 1911-13. Ford script only
One original front panel with “Made in USA”
One new front side trim. All 3 pieces $100
Edwards.705 828 5405

One new front panel 1911-13. Ford script only
One original front panel with “Made in USA”
One new front side trim. All 3 pieces $100
Edwards.

Selling still for a friend. '24 & '26 head but they can be used on any engine right? Someone needs one for winter engine rebuild! Reduced to $75 each plus the ride. Email me thru the profile. Thanks.

For sale: new side curtain rods (2) $20 plus postage
20220926_180802.jpg
side curtain clips $2 each plus postage

For sale: New Parts still in bags. T*2545-M small steel cup -w-zerk $7
T-2825 09/27 6 hub bolt nuts $16.50
T-3272-L Laminated Mag Coil Shims 4 pcs. $7.50
T-6210-12 Float Valve & Seat $20
These numbers are from Antique Ford
314-575-7115 for pictures
All prices are plus postage

I have 3 Schrader 777 stems and 1 Dill TR3 stem, bridge washers and nuts. The dill is the same size as the 777 stems. Not perfect but hardware does thread on them.

$100 plus shipping.

IMG_4264.jpeg

WTB top bow irons for a 1915 touring car

New drag links not being produced anymore.
1909-10 fine thread. $325 slight surface rust.
1911-13 course thread. $325 powder coated.
1913-16 pinned. $225 powder coated.
All plus freight. IMG_4568.jpeg IMG_4570.jpeg IMG_4571.jpeg

For Sale 13 early front hubs. 3 are not machined for speedo gear $80 each. Others that are machined $50 each.Steve 701 212 5009

For sale: #332of 2500 made Franklin Mint assembly line to commemorate Ford's 100th anniversary. Excellent condition, with certificate of authenticity.
Asking $650.00, shipping included to lower US. Always open to offers.

I’m looking for a pair of rear hubs for a later set of demountable wheels

Castings for the dash rail on 1903-04 Ford. $400 pr.
Rear door sill plate for 1903-04 Ford tonneau. $200. IMG_4558.jpeg

IMG_4600.jpeg
Dash rail also fits 1903 Cadillac.
IMG_4607.jpeg

An assortment of early distributor coils. Price for all $50.00 plus actual shipping. Mark Chaffin (951)805-0928

20251209_085241.jpg

for sale: Ford script #T 604 fan bracket $15 plus postage

314-575-7115 for pictures

WTB Horn button bracket for 1922 touring.
If possible with the switch and button.
Thanks Larry

Left the comfort of Florida's version of 58 degree cold to brave Ohio's snow & ice 10 degree version this past week.
I just wanted to thank all the Ohio T folks I met this week for their very warm hospitality, specifically Joe Bell, Bill Reep and Nathan Fahrni. (Tim Wrenn, sorry I missed you this trip!!)
Being in the area, I just had to make a...

LOOK AWAY, this is not a Model T part it is for the Model A.

One New Old Stock Starter Gear Drive for the early 1928 Ford Model A using the Abel Drive starters. This will only fit the original, unmodified Abel drive-type starters, not any of the other/later Model A starters. I have an early 1928 Model A with the Multi-Disc Clutch and the correct...

120 years ago today the Ford Motor Company held an emergency board meeting. The reason? To compose a letter demanding treasurer and board director A. Y. Malcomson resign. He secretly put together a competing company, Aerocar, and the Detroit newspapers had just reported on the company and Malcomson’s role as President and majority owner of the new...

Spun brass hub covers
4 pc set. $250 shipping included. Pics on request. Eric Edwards
New Double Twist horn lHD $375 post included.
Edwards 705 828 5405

WTB looking for a friend: Horn button assembly (including mounting bracket) for a 1922 Touring Car. If you have one available, please message me price and particulars though the forum. Thanks in advance.

Bob
rls120

For sale: frame and glass for 3 windows on top $45 plus postage

call 314-575-7115 for pictures

For sale: Brass bonnet for E&J 656 $25 plus postage

call 314-575-7115 for pictures

Original coil tester good condition $150.00

Ed aka #4

Not the prettiest 10 tooth pinion in the world; however, still usable. Price is $25.00 plus $8.50 shipping. Mark Chaffin (951)805-0928

20251205_140307.jpg

Completely disassembled and cleaned, new float, float valve, venturi and choke spring, reconditioned spray needle and spray nozzle, throttle shaft bushings installed, test run. $235 postpaid to continental USA email: wlkma9@gmail.com

One very nice used rear axle differential $100.00 plus $18.50 shipping. Mark Chaffin (951) 805-0928

20251204_141451.jpg

20251204_141512.jpg

Brinze Vertical crank handle holder holds the crank handle in vertical position $92. Post included

Crack free. Dual port intake OHV Chevy. adapter plate required
Complete with rocker train. Valves removed $750 shipping included to lower 48 and Canada. 705 828 5405
Edwards

I am looking for a good Turtle Deck Lid for a 26/27 Runabout. If anyone has one please let me know. I am in Denver Colorado. You can call me at 720-322-4496.
Thanks,
Allen Fistell

For sale: vaporizer $50 plus postage

20220920_190200.jpg

These are only top rings. 16 total. I have no other information about these other than what is listed on the packaging.
These were in a Federal Mogal packaging
Labeled .043-4.065
Top Rings from R10393t65 or R10393x65 ?

These came from Sam Ciprianos estate
25$ plus shipping

IMG_4227.jpeg IMG_4226.jpeg IMG_4228.jpeg

$15 plus shipping.

IMG_4224.jpeg IMG_4225.jpeg

Hodgepodge of hardware. Drilled bolts, machine screws, studs, nuts etc. $10 for all plus shipping.

IMG_4221.jpeg

New in packaging $40 plus shipping
IMG_4220.jpeg

New in packaging- $25 plus shipping

IMG_4218.jpeg IMG_4219.jpeg

New in box. $15 plus shipping

IMG_4215.jpeg IMG_4216.jpeg IMG_4217.jpeg

New in box $10 plus shipping

IMG_4213.jpeg IMG_4214.jpeg

New in packaging. $20 plus shipping

IMG_4211.jpeg IMG_4212.jpeg

For the improved Ford. Price is $40.00 plus $18.50 shipping. Mark Chaffin (951)805-0928

20251203_161333.jpg

Modified inner clutch drum with eight notches instead of six like the stock T. Likely for use with the Turbo 400 or Watt's clutch pack design. Price is $40.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20251203_153723.jpg

20251203_153735.jpg

Looking for someone to help get a T running north of Cinci Ohio, The truck was the original truck of the 105 year old company, a grand daughter would love to see it out and about again. It is a little far for me right now but I know it has been kept in dry storage all these years. Thanks Joe Bell 419-618-1025

FS price drop. I have original Ford Model T key numbers 55, 58, 61, 63, 66, 67, 69, and 70. A couple are nickel plated the rest are brass. All are Ford script except numbers 55 and one of the 61s (I have a couple of 61s) Price is $15.00 each.

Ed aka #4

FS I have original Ford Model T key numbers 55, 58, 61, 63, 66, 67, 69, and 70. A couple are nickel plated the rest are brass. All are Ford script except numbers 55 and one of the 61s (I have a couple of 61s) Price is $25.00 each.

Ed aka #4

Need 1 buckle for an SR mother in law seat. Have straps etc just missing one of the buckles that mount on the back of the body

Jim IMG_0548.JPG