MTFCA Forum

Using audit information, i broke down the net profit by model. Model B generated more net profit than the C and F combined for fiscal year 1905 (Oct 1, 1904 - Sep 30, 1905):

B2F6B4D8-0FEF-4246-8CCD-EA8D7A46C524.jpeg

This is what I have currently for production numbers and profit by year, taken from Ford Motor Co. Profit & Loss (audit) records. 1909 profit/loss by model were no longer documented, and I used 1908 net profit numbers (probably not correct).
Cheers,
Rob

70F47A47-FB79-4DBD-8346-FF73B1E4DDDE.jpeg

Hi, I bought these four keys recently to try in the FORDLOC that I sold. They did not work in the FORDLOC but two others (non-original Master brand keys) did and I sold those with the FORDLOC. These keys MAY work in someone else's Fraim, Slaymaker, or FORDLOC, I don't know. I simply do not need them.
There are four keys, a Master Lock, a Master, a...

Cover transportation available to Hershey form northwest. Leaving end of September. 20 foot covered trailer, will haul car, parts, rolling chassis. Fare pricing. Ray at 360 271 7780.

Single car transportation in 20 ft covered trailer from Northwest to Hershey. Also, will haul parts and chassis. Leaving Seattle area end of of September. Very fare pricing, fuel is not cheap. Contact number is 360 271 7780 ask for Ray

Today my group went to a assisted living facility for a car show for the people who cant get out to see car shows. We do this all over the county a couple times a month. It was crazy hot today, Real feel 107! Giving rides was a challenge due to the engine heat on top of the ambient temperature. All had a great time though. One lady was a 101 and...

I’m looking for these parts. If anyone has it, I can meet up at Hershey.

Kind regards,
Jonny Eriksson

Got a Disc brake system for small drum rear end that you are not going to use? I'm looking to buy one.
thnx

frontyboy(2ho6-919-1949 test or call, Seattle

No one wanted it so I deleted the ad.

Wood wheel big brake drums and hubs 50$ each both have nice keyways. Hub cap threads are so so drums are nice

I recently picked up a 1914 touring car that has had minimal restoration and mileage (due to lack of wear on the internals and moving chassis parts). Cosmetically, the car's fenders and splash aprons were repainted at some point, but the body, upholstery and tattered remains of the top are original.

The engine assembly date is late November 1913,...

New(Repo) or original any brand model t wooden coil box. Going on speedster so not fussy about the brand. Prefer complete with switch and mountings. If you have one on the shelf in the barn turn it into money. Send photos, to stop scammers, I will be asking specific questions and you will have to have the real thing or no deal.

thnx,

frontyboy

New(Repo) or original any brand model t wooden coil box. Going on speedster so not fussy about the brand. Prefer complete with switch and mountings. If you have one on the shelf in the barn turn it into money. Send photos, to stop scammers, I will be asking specific questions and you will have to have the real thing or no deal.

thnx,

frontyboy

Sold to Ed! Thanks.neat booklet for the 1920s Model T. 6 by 3 . 22 pages. Lots of graphics including Fordson Tractors. Nice original condition. 35.00 including postage within the USA. Email me directly motoringicons@hotmail.com or call at 734-730-4274 Thank you.

Tire lock is Sold

I am looking for a Fat man steering wheel for my Model T 1915. If possible a complete and working steering wheel. Shipment to the Netherlands should be no problem.

A while back I posted about how I was going to make a new set of rear hubs for my 48 spoke pin drive Daytons. I included some pictures but I thought I would show the finished articles along with the rebuilt front hubs. I made the hubs out of 4130 and the pins out of hardened 416 stainless. Instead of riveting the pins on I made them longer and...

We are going to be in the Elk City area September 16-19 and Wallace September 20-23 driving the backroads and wondering if there are any T people in those areas that would like to join us or have any special places that they would like to share with us. On this trip there will be only two cars and four people, we have a 26 roadster and a 27...

Wanted to buy this seat bracket shown in attachments, passenger side. Thanks 1924/25 Canadian coupe

…lower that speedster front end 1/2”. Make it go faster :roll: I even removed brass bushings. Notice pic of minor thread damage on right spindle - way beyond that needed for a bearing. Otherwise threads are excellent. Only $80 + the ride…

..Pat’d 1904. Needs lid half of latches but has instructions in lid. Even has the ‘key’ and 4 brass mounting brackets.
Only $80 + Fed Ex costs. … or possibly USPS flat rate medium whichever is cheaper.
gwhouse731(at)gmail(dot)com

For sale in rebuildable condition is 1 U&j up draft carb. Needs a new bowl and I do not know what else it will need. Asking price is 125 or best reasonable offer call or text George 2036873827

Four keys attached by a rivet that can be used in ignition tumblers # 51-74. Only $75 including lower 48 mailing.
gwhouse731(at)gmail(dot)com

Looks exactly like previous years. Parking in Fairlane Town Center parking lot.

Hope to see you all soon.

I am car #806 and I will be in the Red Zone.

For Sale pair of Ford Script Pliers - Band Wrench - New Wheel Puller asking $75.00 for all shipped to your door Call Matt 503-eight 2 four - 268one

A few years back, Rene posted that he was looking for a small spiral gear for a Patterson speedometer drive. I have been unable to find him in the MTFCA or MTFCI membership. If anyone knows him or his contact info, I'd like to get in touch.

Torpedo Wauseon Ohio.png

Ok. Some folks on here are aware I am rebuilding a Centerdoor from a complete body I got from another hobbyist. Said body needed some parts redone wood wise, and those pieces have been completed.

The front pillars align with the cowl, so all good there. (No final assembly yet).

Mocking up the hinge pillars and rockers seems straightforward...

This is total trivia, but I find it interesting. I have several NOS Sediment bulb inlets for the 1912 and later bulbs. The factory number on the sediment bulb is 2088, but the inlet is not listed. I find that interesting in that most of the inlets I've seen are either plugged, or have a hole punched in them.
The earlier style inlet is quite plain...

Ruckstell housing and parts. The tube is bent, it can be straightened or replaced with the extra tube. $500 for all. kdmks AT att.net. All plus shipping, pick up in Los Angeles or I can deliver south to San Diego.

Does anyone have a 60 inch speedometer cable housing with the cable they would trade for my 50 inch cable housing and cable.

I need 60 inches for my Centerdoor Stewart 160

Thanks.

I missed the sale earlier of the pump and gauge that recently sold.
I have a nice pump, but I’m looking for a gauge similar to the one that sold.
If anyone has an extra, I would be interested

Scott
636-544-7750

20250810_113552.jpg 20250810_113605.jpg 20250810_113611.jpg

T trailer wiring connector. Only one I ever found.
$35 shipped to lower 48.
Check or PayPal

Contact via forum. PM or email.

Does anyone have any wide track axels or parts for a model T?
I sent emails to collectors that I thought would have wide track axle parts but I have not received any emails or phone calls back.
Please call or email me with any information.
Thank you,
Frank Seress
sarikatime@yahoo.com
eight one eight two five four six seven nine seven

Model A Ford stainless steel headlight buckets ... both will require polishing , 1 will require some light hammer/dolly work to straighten small dented area ... price is $75.00 + actual postage or pickup at my site in northern Colorado ...Gene French 970-581-two eight zero eight hlight.JPG hlight1.JPG hlight2.JPG

Looking for early brass windshield frame. Not picky on which style it is as its going on a Bitsa car with no top. repo is fine.

Thanks,

Dodge

Very nice original unrestored carb. Contact me thru the MTFCA messaging system email.

IMG_3260.jpeg

I acquired a 1914 Touring a few days ago and I am trying to determine if the body was built by Herbert or Hayes. I have done a lot of encyclopedia/google research and Hap Tucker has an excellent post dated May 8, 2011 about this subject but no conclusive way to determine the difference between these two body suppliers. So I thought I would post...

Set of 5 original metal stem covers and rim washers, these are nickel plated brass. $85 includes 48 state domestic shipping. Contact me thru MTFCA messaging email.

I would like to buy a pair of split bumpers/bumperetts for a 1926 coupe in decent condition. Thanks

Volume 1-4 of the vintage Ford. Some of these issues are hard to find. $200 plus shipping. The complete set of all issues is also available, just pay shipping. kdmks At att.net. These are located in Colorado and will be shipped from there.

Pair of original accessory flint ignitors for gas headlamps. Complete and functional, just twist the handle at the bottom ( which will be outside below the lamp) for sparks at the top to light the gas. Burner shown for mounting method, not included. $125 pair includes 48 state domestic shipping. Please respond using MTFCA messaging email.

WTB, a late 25 open car dash board in good shape.

This past week we attended the 17th annual Ryan Ramble in Greyeagle, California. 38 cars attended. This was my 7th time to attend. It is a great get together. We travel around 100 miles per day. I racked up 300 miles total, and never lifted the hood! The meet is put on by the Ryan family, and is a part of the Northern California Horseless Carriage...

This past week we attended the 17th annual Ryan Ramble in Greyeagle, California. 38 cars attended. This was my 7th time to attend. It is a great get together. We travel around 100 miles per day. I racked up 300 miles total, and never lifted the hood! The meet is put on by the Ryan family, and is a part of the Northern California Horseless Carriage...

Hi all, anyone have an older cast iron bench mount engine stand they'd consider parting with? Something like the one in the picture. I don't have floorspace for a floor engine stand. Figured I'd ask around about an old one before I fabricate one from scratch. Thanks for your time.

Decent pair of 1923 Maine license plates, nice and solid. Asking $50.00 plus $10.00 shipping.

WTB Ford faithfull oiler 3 dipper complete with trans cover cheers Warwick

Been a while since I've done this. Here is this season's opener of Spectators and Funny Hats.

IMG_0691 tight cropped.png
IMG_0691 tight antique.png

16180444475_a3dc2cf961_k.jpg

WTD ford faithfull oiler 3 dipper complete with trans cover cheers Warwick

These are bolt on with no drilling, and are designed for the KC Warford. They will work with an original aluminum Warford as well with a minor modification. This supports the rear end of the Warford, and works great on an early frame that you don't want to drill.

I have two ready for a T

I have one ready for a TT; I won't be making more of...

Would like to buy a set of side curtains and a top boot for 1927 Runabout Sport. Would prefer Gypsy style, but would certainly consider regular style side curtains. Needs to be tan color to match existing top.

Davet753@comcast.net

For sale: Stainless steel tray and cups front Ford 75th anniversary made in Sweden. Asking $100.00 obo plus $25.00 shipping.

Accessory aluminum clamp on steering column support great for speedster. Asking $40.00 obo plus $10.00 shipping.

20250730_104315.jpg

Pair auxiliary brake levers and studs. I haven't a clue what mfg.

$40. + $15 shipping. Check or PayPal

Contact via forum. PM or Email.

I used to enjoy the old members photos section. I can't find it since the changeover.

For Sale: Used pair of TT rear spring perches. Need new bushings. $40 pair. Reach me via PM or at oldfords@verizon.net

For Sale: pair of rebuilt spindle arms with new bushings. Thread have been coated with cosmoline for protection. Could use some fresh paint. $50 pair plus shipping. Reach me via PM or at oldfords@verizon.net

For Sale: Group of 11 used triple gears. Will no doubt need bushings but the teeth all look good. $150 for all 11. Reach me via PM or at oldfords@verizon.net

For Sale: 5 u-joints, all used, all quite serviceable. $150 for all 5, plus shipping. Reach me via PM or at oldfords@verizon.net

I'm not certain what the going rate is for a Buell/Splitdorf explosion whistle spark plug is... (just the plug, I have a whistle)

If the price for a dedicated Buell/Splitdorf plug is too dear...

I wouldn't mind being directed to a source for long reach plugs, and/or an adapter so I can use my whistle.

at least one of our beloved vendors has...

I believe this is one of the somewhat earlier transmission covers because it is flat.

$8 plus shipping

Scott Elliott
971-506-94O2

This pair came as extras with a car I bought $140 plus shipping. Best way to message me is through the forum. Thanks

Nice solid rim and spider. Keyway is nice. Has a crack repair. The rim is polished out very nice.

$40 OBO plus shipping

Scott Elliott
971-5O6-94O2

1915-1921 wooden steering Wheel in nice shape.
Wood is solid. Joints are tight. C3637 stamped in spider.

$100 plus shipping.

Scott Elliott
971-5O6-94O2

Make offer

Scott Elliott
971-5O6-94O2

Make offer

Scott Elliott
971-5O6-94O2

Make offer
Slight band in one of them, easily straightened

Scott Elliott
971-506-94O2

Make offer

Scott Elliott
971-5O6-94O2

Make offer

Scott Elliott
971-5O6-94O2

Make offer

Scott Elliott
971-5O6-94O2

Make offer

Scott Elliott
971-5O6-94O2

$5 each plus shipping

Scott Elliott
971-5O6-94O2

Just thought you’d all like to know the knee replacement surgery I underwent on 7/25 went very well. Please refer to OT forum to post comments. Please do not post on general form. Thank you all for all your helpful advice. Jim Patrick

Here are 9 early magnet clips that are NOS. If you need them you know what they fit. $10 + shipping. Email me by the forum.
Thanks Dan
IMG_4484.jpeg

If you see something you like, make an offer. All plus shipping. Kdmks AT att.net.

For sale Steering wheel puller and large early 4 spoke cam gear puller. Marked FORD in block letters (no 5Z number on tool). First photo taken from the Ford Model T Manual . Four jaw puller. Threads are in great shape. Price $275 plus shipping. Email, Call or text (248) 894-75fiveone. Thanks, Walt

For sale APCO 437 front spring perch removal Tool. Special tool that hooks around the front axle to push out the spring perch. Threads are in great shape. NOTE: must soak perches with good rust penetrant for days before use. Price $275 plus shipping. Email, call or text (248) 984-75fiveone. Thanks, Walt

FS: Brass Door with beveled glass for E & J 1908 Left Side Light. New reproduction but with a chip in the upper right corner. $20 not including shipping.

ejldr01.jpg

ejdr02.jpg

ejldr03.jpg

Thanks for looking!

For sale 1926-27 spare tire bracket/mount for wire wheels. Includes two lugs, locking lug, padlock, and key (marked eagle lock co , on key). Price $130 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

FS: I found another E & J fancy tail light, that I believe was used on the closed cars (Coupelet, Centerdoor Sedan) for 1915. The steel parts are nice and solid. There are a couple of dents in the top and the burner is missing. The lenses are intact, but the big clear lens is starting to go purple. Asking $120 not including shipping.

15tl05.jpg...

Sold. Thanks, Walt

For sale 5Z320 small crankshaft timing gear puller. Dealer tool. Threads are in great shape. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Sold. Thanks, Walt

High Compression Aluminum Head
Model B Intake/Exhaust Manifolds
12 Volt Alternator
Texas T Distributor
Tillotson Carburetor
Electric fuel pump with pressure regulator
Water Pump
Rack/Pinion Steering
Ruckstell Two Speed 1926 Rear Axle
Model A Mechanical Brakes rear
1927 Wire Wheels

Starts and Runs great $8500 OBO

Contact Eric at...

I know this might be a long shot but I have had luck before. Does anyone have an older reproduction flat tube brass radiator for a 1915? I know I can get a new one but I have a reason for wanting one from the 90’s or early 2000’s.
I am willing to pay for the right one. If you have one that you have no use for please let me know by PM. Thanks, Mike

Burner stand for gas headlamps,I believe this to be E&J style but may work on any Model T gas headlamps, last one I have and they are no longer being made so not available at parts suppliers. $55 which includes domestic 48 state shipping. Contact me thru MTFCA messaging email.

Nice brass set of flint ignitors for gas headlamps. Complete and working. $125 includes domestic 48 state shipping. Contact me thru MTFCA messaging email.

New and used odd lot.
$12 and I pay the domestic 48 state postage.
If I get no response they go in the garbage! Need to clear up the odd stuff!
Contact me thru MTFCA message system email.

130+ views and no inquiries

these were offered as a courtesy at my cost, but with no interest, I'll just keep them

offer withdrawn

Unusual headlamp burner, has a chip so is not functional but makes a great display. $35 which includes domestic 48 state shipping. Respond using MTFCA email messaging.

This solid brass clock has much nickel plating remaining or could be stripped to bare brass. Bracket included for surface mounting to firewall or instrument panel. Nice 2 1/2 face, beveled glass no chips dents or cracks. Winds runs and sets perfectly. Last patent date is Aug 16 1910 so this is a very nice early clock. Asking $225 which includes...

to match this one. IMG_4182.jpeg IMG_4181.jpeg IMG_4183.jpeg IMG_4180.jpeg

Does someone have a pair of brackets for mounting the side lamps for a 1925 C-Cab? My 1920 touring has them cast into the windshield stanchions, but not so for the truck cab I'm putting together. Thanks...

WTB 1911/1912 running boards for a 1912 torpedo project.
call or text 313 919 1939, Thank you. Anthony

20250718_104006.jpg 20250718_104013.jpg

Back for sale. 1903 Holley Brothers Float Top.

$100 + $20 shipping.

Apparently the buyer from down under is a flake.