MTFCA Forum

20251019_094403.jpg

Ships flat. $40 shipped to lower 48

PayPal or check is fine.

Email via forum

Nice pair, $60.00 plus shipping. Kdmks AT att.net.

NOS 1915 door with lock and hinge. Original black paint. $250 plus shipping. Kdmks AT att.net.

fitting things together on my two current projects. IMG_4459.jpeg IMG_4460.jpeg IMG_4466.jpeg IMG_4464.jpeg IMG_4465.jpeg

I will buy your extra coils outright or arrange for you to get rebuilt coils back as payment or partial payment. I rebuild coils for private individuals and Model T parts suppliers and we are always looking for good usable coils for rebuilding.
I have worked this deal many times in the past and know what works and what doesn’t for both of us and...

20251017_105814.jpg

One rubber stem 30 x 3 1/2 tube for sale.

$20 + $17 shipping.

PayPal or check.

Email via forum.

20251017_102227.jpg

20251017_102216.jpg

For Sale, Startometer SB. Still works.

$45 shipped. PayPal or check is fine.

Email via forum.

Torpedo wedding day.png

From Tom Rootlieb .

Does anybody know who was selling these vintage gas pumps at Hershey this year?

I found the best aerosol clearcoat to protect polished brass that I have ever used in “Mohawk Gloss Lacquer for Brass” that can be purchased from Amazon. It goes on perfectly clear without fogging up or developing bubbles.

IMG_7285.jpeg IMG_7286.jpeg

1926 Model T Coupe. Over the top build. Powerful smooth engine with Model A carb and manifolds, electronic distributor, alternator, 12V, KC Warford, Shure-Stop disc brakes. Many other extras, including wind wings, 3rd stop light, turn signals, etc. Beautiful body, interior and paint. Made to run and tour. $18000. PM Kurt in Great Falls, MT....

Here’s a reproduction early style water outlet.
Has a crack around bolt boss. Easily repaired.
$50 plus shipping.

IMG_3913.jpeg IMG_3911.jpeg IMG_3912.jpeg

I have an assortment of frame brackets for my 12. These are the ones that are riveted with two rivets to the sides of the frame that the body to frame brackets would mount to. Some the steel is thicker than the others.
Anyone know if the earlier brackets were thinner or thicker than later ones?
IMG_3910.jpeg

Thanks!
Mike

Asking for a recommendation: does anyone know where I can get roller shades restored with period correct fabric material for a '17 Towncar?

Very Rare 1909 Buffalo Carburetor that has been restored by Russ Potter. They were used on Model Ts up until April of 1909. PENDING shipped with insurance to the lower 48.
Lang’s 1-800-872-7871 M-F 9-5:30 eastern time.

Blessings to my fellow veterans!

Hi all, I have recently begun restoring a '27 TT pickup. Both of the rear rims are badly rusted and need to be replaced. The tires which I pulled off of them were Wards Riverside 32x6, 7.00-20, which need to be replaced as well. If anyone out there has a good pair of rims and would like to sell them, please send me a private message.

I struck out at Hershey. Looking for a 17-23 left front fender.

1914 Holley G, new float, float valve, venturi and choke spring, throttle shaft bushing installed, reconditioned spray needle, test run. $300 postpaid to continental USA email: wlkma9@gmail.com

Good morning all and Happy High Holy Days of Hershey,
We are all set up and will be ready for business on this last morning. If anyone is looking for the best quality starters, coils, or voltage regulators, stop by and see us Hershey GBH17-18. With the help and cooperation of Jeff Stevenson of Modeltstarters.com, we’ve been able to bring you the...

Looking to buy a high hood cowl. None found at Hershey 😞.

Edit, found one online.

Hi all, we had a very cool tour this past Saturday through the North Chagrin Metroparks in Northeast Ohio. Our club, the Bumps'n'Grinds, is smaller in numbers, so we invited the Northern Ohio Model A Club and a few other VIPs (an Overland and a Willys-Knight). The weather was perfect, the roads were in great shape, the cars ran extremely well and...

I just found 5 brand new, in the package 1/4-32 taps. They are top quality Chinese made...not my normal USA taps that I typically offer, but are still a quality product and will work just fine for many many years. The bonus is, these are FREE and my USA ones are not...

In case you missed it, they are FREE if you buy 2 or more Full Flow Float...

Will there be an EFR meeting at Hershey this year?
If so when and where?

Thank you.

Does anybody know what these look like? I know what the rear one looks like and the middle one, but the front one (according to catalogs) is for 24-27....so, is the 1909 front bearing different than this later one?

Also need to know which way the bearing clip goes, at the moment I've got it drawn on the top side of the bearing, because this puts...

Saw a really nice 13 Turtle deck in the Chocolate Field South today. Not mine but if I needed one it would be.
Come by my spaces CR33-38 and I will show you here it is.
I don’t know the space number but I can show you. Dan

Pretty good documentary on the Ford Model T Ignition Coil:

For sale: driveshaft housing with driveshaft $75 plus postage

20250829_183809.jpg 20250829_183841.jpg

Hello T lovers! I am wondering if any one from the Colorado front range, or even Albuquerque to Cheyenne will be attending the Texas T party and can return with a set of fenders. One day I will have to make it to that round up but alas, not this year. If transporting front and rears is possible for anyone please give me a shout! I am pricing the...

Does anyone have a good 26-27 wishbone they will be bringing to Hershey? I'm interested in picking one up. I am going to bee in the Green Field GDA 28. Thanks!

FOR SALE: Rear Fenders for 1926-7 Touring or Sedan. $350.00 for the Pair. Can deliver to TEXAS T PARTY in Marshall, TX next week. Let me know any other parts needs you may have and I may be able to help you. Contact Eric Gator Gould here on MTFCA Classifieds website.

FOR SALE: Front Fenders for 1926-7 Model T. One is a New Rootieb Fender and the other is an original. Selling as a PAIR. Can deliver to TEXAS T PARTY in Marshall, TX next Week. $900.00 Let me know if you have other parts needs I may help with. Contact Eric Gator Gould here on the MTFCA Classifieds Website.

The auction of Stan Lucas's car collection was 9/20/25, total sales were just under 34M. While many cars sold for more than the estimated amount many sold for much less than expected. The Duesenberg went for approx. 1M under what it was bought for. His only model T was a 1910 touring that was reported to be very nice and very correct, it only...

4 Hyatt bearings measurements are in the pictures cages are tight will be posting more later in the week as I get them clean price is 30$ ea plus shipping sold sold sold

I hope everyone will be in Hershey! I’ll have my usual spaces in the Red Field, RWI 18,19 &20. I’m just a few rows back from the Horseless Carriage Tent. Items will be for sale at Hershey and what doesn’t sell will be listed here on the forum later. Thanks, Bob

Allen HCCT- Original condition, complete with gauges (needing restoration) and hard to find crank handle. Restore or clean up and use. Base will need repair as corner is broken and missing. (See pics) Will bring to Hershey if serious interest. $550. Call or text: 3one55two5six3eight5

09-15 Kingston and Holly Carbs, will bring these to Hershey, many more at home of all years . CM 30-40 Larry

For Sale, KRW Combination Machine and engine stand head. I don't know a lot about this machine, the gearbox has been replaced with a right angle drive box and looks like it should work. I have an original gearbox that will go with. I have a rack with 10 boring bars/reamers, and I believe the frames for the Model A and Model T engines. I have two...

I'm looking for a 1909 Coil box. I'm going to Hershey. Contact Eric. 815 535 1367

FS: Antique Auto dash plaques or dash plates, etched from thin gauge brass, approx 2 1/2 x 4 1/2. I believe these were originally distributed by the Greenland Company in the late 1960's or early 1970's. Also a brass Model T Club dash plaque. $10 each, not including shipping.

antq01.jpg

antq02.jpg

Thanks for looking!

FS: 3 Hardcover Copies of The Model T Ford Car - A Complete Reference on the Universal Car by Victor Page 1915, 1917, and 1920 editions. Very used. Asking $20 for the 1915 edition, $10 for the 1917 edition, and $5 for the faded 1920 edition, not including shippping.

pagemt01.jpg

pagemt02.jpg

Thanks for looking!

Can anyone confirm ID of this distributor drive please, no other details available:

2250132776.jpg

2250132831.jpg

I am bringing a 26 4 door to hershey its a project i will never get to .interior is out so you can get a good look at the bones the car is in primer and i have a clear Massachusetts title in my name .ready to restore. Will be at spot cw10 monday after lunch. First $1600 takes it away.i can text pictures if interested

Saw some fine ModelT cars and a few A too today. You have never seen so many Carburetors in your life. All look like rebuilt by RP. Tomorrow is the day. Let the fun begin!

WTB a pair of hood sides with good hinge loops and not wore through where the clips set. Mine were lost unfortunately. Trying to do a high point show car with all original sheetmetal. Please sent me pictures of what you may have available through this website. Looking for 23-25 not 26-27.
Thanks you. Stay safe. Mark Eyre Battle Creek Michigan.

All Brass Double Twist Horn. Slight blem
New reproduction from the UK
$325 post included. Insurance extra Pics available
Eric Edwards. 705 828 5405

Did anyone ever reproduce a T exhaust manifold with the FORD script? I have a NOS exhaust manifold with a script and the Ford part number on the back surface that came from a well known collector.. Bruce

Hello all - I have a few items to sell or trade that came from my 1926 roadster.
4 coils (unknown if they work) with the coil box and all new spark plug wires and new cowl to coil box wires.
A front axle with wishbone in reasonable shape.
3 or 4 (can't recall which - I'm at work right now) front spindles. These are '19 to '25 except one is a...

Here is a rebuilt Early Stamped steel double stack mag coil.
I will bring to Hershey. $250 NO SHIPPING. Email me by forum. Dan
IMG_4652.jpeg

I have at least 3 double stack oval coil cast iron mag coils and 1 double stack stamp steel mag coil cores. Any mag coil rebuilders coming to Hershey need them? For that matter, does anyone need them. Not bringing unless spoken for. Email me by forum. Be quick, times a wasting. Dan

Is anyone going to Hershey need anything generator armature cores? I can bring some if so. Email me by the forum.
If not I’ll cut the copper off and scrap them. But you better be quick. Dan

Sorry put in wrong place.

Dome light probably from a sedan as it would use a remote switch . Unknown make. Single pin bulb required. Twist mounts on base. $20 plus the ride.. PayPal friends.
Contact me through the forum please

Need just the half shown or will take a complete hinge if you don't want to split it up. Thanks
3909ACF8-87AF-424C-A5F7-5C72BE702A5F_1_201_a.jpeg

Seat bucket used on the early roadsters. Very solid metal bucket with original wood. The base board the seat is on has been charred by fire and should be replaced. It is original and good for a pattern. Asking $300 or best offer. Contact me through the forum. Thanks. Jack Putnam

For sale: Hayes rim $100 plus shipping

For sale: air pump to pressurize gas tank $150 plus postage

20250908_185200.jpg 20250908_185156.jpg

Got a complete 15 rear end. Driveshaft, Radius Rods, brake rods. Came out from under my late 15 Touring to install Ruckstell.
Has smooth backing plates. Can bring to Hershey. Email me if interested by forum. Do it fast loading trailer, may run out of room.

Thinking of parting out a combination machine to Hershey. Anyone need anything? Email me by forum. Dan

WTB A nice pair of vintage bud vases with original brackets for my ‘26 Tudor.

FS: A Jno Brown 115 tail light suitable for a 1914 Model T Ford. This one is all steel except for chimney cap and the upper part of the fount. The front door and red lens are missing. There is a lot of surface rust and some pitting, but I don't see any rust-through which is good. On the plus side the metal here is nice and straight, this light...

wanted ford 1912 touring body

FS: Another pair of Jno Brown 110 side lights, for parts or restore. These are the later versions, the entire chimney is steel with the exception of the brass tops. At some point they were copper-plated. An earlier fount is attached to one lamp but it is kind of rough. One of the tops is messed up as well. On the plus side there's very little rust...

Time again for Lang's Old Car Parts Calendar! Lang's Old Car Parts is accepting photos of your Model T for our annual calendar. Photos and information are due by Friday October 17th! High quality photos only (photos from phones usually do not work). When sending the photo, make sure it is downloaded in FULL SIZE. Newer phones can take good enough...

Hershey AACA Fall Meet is approaching. We will be bringing a large array of Used and New Old Stock items to sell as well as your pre-orders. So this means if there is anything you would like to pick up at Hershey, please let us know ahead of time as we will not have reproduction items there. We want to make sure you get everything you need so the...

I know it's not Model T but it's out of that era. Induction coil Dow Spark Coil Boston probably for a Stationary engine. Untested, needs total restoration. It's yours if you pay for shipping.

indc05.jpg

indc06.jpg

indc07.jpg

Thanks for looking!

This is a black painted bumper made by the Albany Bumper Co, Albany, NY for the black Model T. Could use some paint, but the label is still visible. Can bring to Hershey. $200 PM for info...

Frank

repainted 1917 Washington plates $150 plus shipping Very good steel plate

For Sale: A nice set of rear leaf springs for a TT. No cracks, pitting, or heavy wear. These can be hard to find without any cracks or broken leaves.
SOLD!
$40 for the set. Can be picked up at Hershey

IMG_7712.jpeg

Parting out a fordson model f .have rebuilt mag and a 1 bbl carburetor both still in boxes .tool box with tools and more .will only bring if interest.also bringing a 26 4 door project car in primer ready for restoration
Have title in hand

Parting out a fordson model f .have rebuilt mag and a 1 bbl carburetor both still in boxes .tool box with tools and more .will only bring if interest.also bringing a 26 4 door project car in primer ready for restoration
Have title in hand

Does anyone know what this Switch Panel goes to, seem like I saw one once on an early fire truck.

The key works and has BASCO on it. The fuse cover is missing, but they are labeled Horn, Rear, RHead, and LHead.

A spare fuse stands on end in the middle.

Switch Panel.jpg

Looking for the tire pump and jack handle pictured. kdmks AT att.net.

For Sale: Nice original 1914 Ford Manual.

$125 plus shipping

ford manual 1914.jpg ford manual 1914 2.jpg ford manual 1914 3.jpg ford manual 1914 5.jpg

(sold) Recently got socked with a few large bills and need to sell my 1916 Touring car. Everything has been rebuilt mechanically and all soft-parts have been replaced. 1916 motor, Ruckstell Rear end. New roof, new springs and upholstery, good tires & tubes. Includes complete set of side-curtains and a top boot. 12 volt conversion with battery...

Anyone going to Hershey have a steel gas tank for a speedster?

tank copy.png

Original frame. No running board irons attached . $ 1000 pickup only
Original Torpedo wood firewall (for pattern) $100
Original Torpedo lower body metal.(for patterns.). $250
Eric Edwards. 705 828 5405

Freshly Rebuilt Small drum Ruxtell assembly with new inner bearings 3:1 gears and shifter
$3750
Rebuilt Fronty OHV valve Head. Fitted with reground 428 valves and new springs $3950 New Rocker train available
Single Buffalo 30x3 1/2 wire wheels by Al McRoberts inquire
Reproduction Morton&Brett fibreglass body $4500 pickup only.
Eric Edwards 705...

Looking to buy a large drum Ruckstell rear end and Rocky Mountain Brakes for my 1926 Depot Hack.

Will be at Hershey and would love to arrange a pickup or purchase while I’m there.

We finished the initial restoration back in 2019 for my wedding (photo below) and now we're ready to upgrade so the car can better handle the hills of Western PA....

WANTED: for ROOF 8valve cylinder head,
3Port exhaust manifold
Cylinder head gasket or tracing
8 push rods or photo, and drawings.

thnx,
frontyboy.

brasscarguy@comcast.net or text 2ho6-919-1949(anytime)

Hershey delivery available.

These were takeoffs from a 1920 roadster project when they were replaced with a set of wheels correct for the year. Removed from a roadworthy car in the 1980's and in garaged storage most of the car's life (one-family ownership for over 90 years and put on about the 1940's). They'd look great on an unrestored driver....

I have no connection or further information
Enjoy Your Day!

Cant hurt to ask,,i was wondering if anyone is coming from west coast to hershey ? I am trying to get a t from arizona to the hershey meet. You never know if you dont ask

For Sale 2 hinges and 1 support rod. No brass caps.$100 Steve 701 212 5009

Bratton’s is closing its retail shop in October.

For Sale: 1928/29 model A roadster top irons, new never used.

These will ship folded.

$1000

28 29 top irons.jpg 28 29 top irons 2.jpg

I typically only make wheels to order… but this order got cancelled. Wheels are ready to go! 100% new components, just need paint and rubber. Bare steel, powder coating available. New hubs and caps available too

5 available 30”x3-1/2” rim —> $1200 ea + shipping

IMG_3301.jpeg IMG_3302.jpeg
IMG_1432.jpeg

Wondering if anyone is planning to come through Kansas City area on their way to Hershey this fall. I would be interested in hiring you to haul a 1924 T Runabout in your enclosed trailer if you have space. Please let me know if you would be able to do so. Thanks

 
I thought I would post this here as well as in the main forum.

As many of you know, I repair meters for HCCTs (Hand Crank Coil Testers). What I do is a very small niche of the Model T hobby. I got into this because the person that was doing it many years ago passed. There was quite a gap until I was convinced (actually conned) to take up the...

I have an extra to me Sunnen hone I will sell. It is an older model , needs motor. The motor is there but does not want to start without a spin. No stones or mandrels. Let me know if anyone is interested. I will send pictures. Email me by forum. Dan

My mother was a knitter in her spare time for most of her life. About 15 years ago she made this old car afghan for my Dad. They are both gone now and I inherited it. Recently i found the patterns in a magazine. If anyone is interested, I can possibly make copies and snail mail, or try and post better pictures. It looks like it was a 2007...

FS: Another Jno Brown 115 Tail light missing fount, burner, and green lens. The top is pretty well mashed in and there is some rust-through on the chimney; I would call this a parts light. Asking $40 not including shipping. Thanks for looking!

11505.jpg

11506.jpg

11507.jpg

11508.jpg

Thanks for looking!

FS: One Jno Brown Tail Light - I think this is a John Brown 115 but the top is blank. Fair condition, the fount is missing and the chimney looks like it's coming loose - on the plus side the glass is nice and the body isn't rusted through. Asking $60 not including shipping.

11509.jpg

11512.jpg

11511.jpg

11510.jpg

Thanks for looking!

Unfortunately Steve did not make it this year.

His spot on the field for 1915 T's was empty.

He was mentioned in conversation at Greenfield Village.

We were all thinking of you Steve and know you were there in spirit

Cleaning out some leftover black kerosene side lamp parts. Miscellaneous parts and pieces, not in pristine condition, but it might help someone complete their project. Make me an offer on the lot. Will ship USPS large priority box. Ships on your dime also. Contact me through the forum mail.

Brass Holly carburetor with a Patent Pending noted on it. Good unrestored condition that was dipped in a carburetor cleaning solution. $100.00 plus shipping.

1910s/20s BASCO (Briggs & Stratton Co.) combination ignition and light switch with two keys.

Tumbler and keys are stamped 37.

A number of different auto manufacturers used BASCO switches. Not sure what make this is from but possibly a Dodge.

$40 plus postage.

Personal check, cash or money order.

Looking for the gas tank ends repros or originals for the 1912 Torpedo. trying to make some a close to original as possible.

I am restoring several Allen Electric HCCT’s and making some extra parts.

I put arrows on the parts I can provide.

I also have extra supplies to make more electrodes. These are always broken or in poor condition so hoping it helps others with their restoration and function.

Happy to help.

David Woods

Williamston T Works

NOS Winfield model V H M N PARTS. They have shelf wear from being in a cabinet for years. Mostly 33 series throttle levers and Model M intermediate and high speed needles. Prices are in the picture. i can email you more pictures if you would like. If your are looking for a particular part for your Winfield model V H M or N just send me a message....

Using audit information, i broke down the net profit by model. Model B generated more net profit than the C and F combined for fiscal year 1905 (Oct 1, 1904 - Sep 30, 1905):

B2F6B4D8-0FEF-4246-8CCD-EA8D7A46C524.jpeg