MTFCA Forum

Looking for a 1914 touring in good running condition although I would consider others. I'm located in Michigan. Not interested if it's painted red. Appreciate any help locating one.

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. SOLD plus shipping Lang’s 1-800-872-7871

This shift-lock assembly is in excellent condition with minimal wear in the shift arm and body. The plunger and spring are new. It should work just fine as it is. This isn't the same one I advertised a couple weeks ago. I'd like $250 for it. Please contact me through the forum email system if you are interested. Thanks.
Bryan Ostergren
Ruckstell...

My “good neighbor “ the land developer tried to destroy my property corner post with his water runoff “project “.
So I used an old school patch job.
IMG_5221.jpeg

Have a lowered 1913 Speedster project. Looking for different ways to mount a friction single lever shock to the rear axle.

I will mount the single lever friction shock parallel to the rear frame cross member.
These shocks have no name or markings. The shock has 2 rubber discs between the shock body and the adjustable tension lever. I am wondering...

(SOLD) Springfield tire tool for clincher tires. Adjusting screw is in good condition. Special tire tool with hook to grab edge of clincher rim. Price $125 plus shipping. Tool measures 15-inches in length. Email, call or text (248) 894-75fiveone. Thanks, Walt

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Brass holley g body steel bowl 35$ plus the ride for parts a restore

Iron body holley g for parts or rebuild 50$ pulse the ride

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Bottom Line Up Front:

Our local South Carolina Model T chapter is going to show their T’s to a local college that has an automobile history class (or similar title). Feb 2 or sometime close to that is the date.

Do any of you know of a 5 or 10 minute presentation with PowerPoint slides or pictures that I might be able to download or borrow?...

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

Looking for this seat bracket for the passenger side of a 24/25 coupe let me know if you have anything that looks like this thanks.

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

Will a 6 volt alternator putting out 40 amps charge a 8 volt battery...

For Sale are a set of 4 original hood hold downs. 2 have very little wear with factory numbers. Please inspect the photos for the condition of each. SOLD for the set of 4. Lang’s 1-800-872-7871

Hello all during rebuild of the gearbox i discovered the gear casing is cracked at the pin of the triple gear, does someone tried to repair this or does someone has one used for sale and eventually also a set of triple gears

On frozen Lake St. Clair 121 years ago Henry Ford destroyed the world one mile record. He became the first American driving an American made machine to hold the record.

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $140 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

For sale Marquette Mfg Co. clincher tire tool. Tire tool for removing and installing clincher tires. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

1926 Touring, sudden-onset problem of slipping in high, but low and reverse are fine. Peeked inside for clues and found the clutch fingers quite loose. Had the clutch spring broken in service? Careful inspection showed it was intact, but...

After much puzzling I finally noticed that the clutch spring and spring cup were pushed right back the...

IMG_5241.jpeg This is the first time the carb has been off in 30+ years.

It’s an NH

What ‘magic’ was it supposed to do ? ( the coil spring)

Thanks in advance….

March 12-18 in Texas

Hello everyone. A very sad day here, Dick Hautzinger passed yesterday. I was very fortunate to know him for quite some time and travel to many swap meets, shows with him. I was always surprised by the amount of people that knew him wherever we traveled. His knowledge of Model T’s was endless.

A wonderful family man and friend to many that will...

Are the brake cam levers for a '26-'27 the same left and right?
I know the cams are different for each side.
Thank you

For Sale is an original Ton Truck Tire Iron supplied by Ford for Ton Truck rear tire changes. SOLD plus shipping Lang’s 1-800-872-7871

For Sale is an original Ford 5Z-196 U-Joint installation tool. It is used to turn the u-joint allowing it to be installed into the back of the engine. SOLD plus shipping Lang’s 1-800-872-7871

Same press as illustrated throughout the Ford Service Manual. Smooth action, no thread wear. Local pick up. $750. Will sell stand with press only. Negotiable. Contact me by email through the website and leave your contact info
Richard Gould
20260112_074942.jpg 20260112_075840.jpg
20240315_112718.jpg
20260112_092541.jpg

For Sale is an original Ford 5Z-165 Rear axle Pinion Gear Nut T Wrench. SOLD plus Shipping Lang’s 1-800-872-7871

Wanted: One 1915-27 electric headlamp rim in unusable condition. MUST have at least ONE usable bracket on backside with usable tabs. Rest of rim, unimportant, as I will cannibalize rim for one lens bracket. Willing to pay shipping. Contact me through this site's messenger.

For Sale is a well made version of Fords 5Z-323. Original version not included. $20.00 plus shipping. Lang’s 1-800-872-7871

For Sale is a Starter Bendex Head Puller. Marked with a Ford Script and 5Z-323. SOLD plus shipping. Lang’s 1-800-872-7871

The time has come to pass the torch so to speak. I have taught my grandson the methods of babbitt pouring of model T main bearings and the procedure of boring and align reaming the bearings. I have been doing babbitt work for 40 years, but the time has come to share the knowledge with a younger person.

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

“Original” Smith just installed a side-mounted spare on his 1925 roadster pickup. Looks sharp, almost sporting - and really changes the look of the car.

I was in a local IKEA store and noticed they had cocoa floor mats for sale. The mats are perfect for the rear floor of 1910-1916 touring cars and are very reasonably priced. They are large enough so that they can be trimmed and fitted to the floor and look to be durable and nicely made. If you need a correct looking rear mat, this may be the...

Response to my query recently was so bad that I am not planning on many parts, yet there was one fellow who seemed excited about the prospect, so I decided to proceed with a VERY small number of parts (like 4 or 5 each and that's it...)

I finished up a couple and will do the rest in the spring time

If you're interested in either needles or...

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

For Sale, nice looking touring 23- 25 top sockets. $250. Call for more pictures. Steve 701 212 5009

For sale EKERN emergency rear axle fixture. Axle rotates smoothly. Grease cup is filled with synthetic grease for long life. Threads are in good shape. Used as a temporary fix to get you home after an axle break. Price $150. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

For Sale is a dainty toolbox that would be mounted on the running board or body. Hasp is Brass and the box is very solid. There are some extra holes by the hasp as shown in the photos. SOLD plus shipping. Lang’s 1-800-872-7871

Looking to buy 1 or more Weber 1910 wheel dollies. I have 3, looking to fill out the set and more would be great. Look at the pictures. I want a set for my unrestored 1911 open runabout. Thanks, Bob, 507 458 6778.

SOLD Stevens spindle bushing re-facer. Marked STEVENS NO. T-290 . Threads are in good shape. Price $285. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens drive shaft sleeve puller. All threads are in good condition. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens piston vise. Good threads and jaws (lead). Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

(SOLD) Stevens generator gear puller. Good threads. Price $165 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

Got this with a car we bought, don't need it, I'm asking $300 it is all there plug and play if you will. interested can text me at three three zero 2four1 two6four 1.

I recently dumped the pan for the first time on my T only to learn that the 'stock' engine I was promised actually has an A crank/ billet mains/ A rods/ and a big cam (you can imagine my surprise!)

Anyway, I think that the logical next thing to to is look into an OHV conversion. I'm too poor for a Rajo so the 1928 Chevy head seems like the...

These are machined from 6061 aluminum and fit the back nut on an aluminum Warford transmission. $60.00 shipped!

You can DM me to purchase or get one at rawaequipped.com

IMG_2719.jpeg IMG_2718.jpeg IMG_2721.jpeg

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

Here are some bell cranks that are Nos. See pictures. &10 each + shipping. Email me by forum. Dan
IMG_5133.jpeg

IMG_4789.jpeg IMG_4475.jpeg IMG_4413.jpeg IMG_4492.jpeg

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $1500.00 plus shipping.
Lang’s 1-800-872-7871

For Sale are “Fronty” Script that mounts to the radiator core. Mounting hardware is NOT included. Available in solid brass or stainless. $49.95 plus shipping Lang’s 1-800-872-7871

26 generator was functioning in the car.
On this car I have rebuilt the drive train, so I thought it would be a good idea to go over the starter and generator.
The previous owner had gone through the generator as it has a new insulated brush plate. The field coils are not new, however they are not grounded . Checked the armature on a growler,...

WTD looking for used ,top for 1913 touring car. i have a real nice car very original car i have a new top but id like a good used one that i can fit to the car, if i put the new one on it might ,not, look right .

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

Completely disassembled and cleaned, viton tipped needle and seat conversion, little to no wear on throttle shaft with bushings installed top and bottom, new choke spring, reconditioned spray needle, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

I’ve been making new transmission drums for a little while. I’ve made a sample main shaft and now i’m considering making gear sets for the transmissions. I started by making one triple gear to see if I could do it. I think I’m going to try to make a full set and have them heat treated.

Hi, Looking to buy a full set of good 26/27 Wood Wheels and Hubs. Happy to pay for shipping to Chicago.

Thanks

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.
I was hoping to post a short video of the fuel vapor coming...

My 1926 Roadster Pickup is 100 years old this month.
I drove it to the beach then drove it home in the rain.
IMG_8189.jpeg

-

Jan 9, 2026

Dear 2026 Bakersfield Swap Meet vendors and attendees,

For personal and practical reasons, it has been formally decided that I will no longer be spearheading the 2026 Bakersfield Brass Era/ PreWar Swap Meet. Therefore, all vendor fees received thus far, or by me in the future, will be returned via the self addressed stamped...

No dents original Ford script oil can and holder. Real nice condition. You won't find a better one. Price drop $125.00 plus shipping.

Ed aka #4

Model T Ford coil tester. this is a rare nice original oak varnished wood coil tester. Big price drop $150.00. plus shipping. I definitely want to sell it.

Looking for information on the manufacturer of these wheels. They have an odd tapered hubcap.

ASSORTMENT OF USED SPARK plugs plus parts shipping included domestic

Here is a set of Windshield cones nuts snd filler blocks. Maybe NOS not sure. Blocks are. $35 + shipping. Email me by forum. Dan
IMG_5146.jpeg
IMG_5147.jpeg

Here are a pair of windshield filler plugs for lower frame 23/25 open car. Part number 7803brx. This is the piece that goes in the end of windshield frame so the cap can fasten on and the frame can be bolted to the uprights. When was last time you saw a pair of them NOS? $15 for pair + shipping. Email me by forum. Dan
IMG_5126.jpeg...