MTFCA Forum

ASSORTMENT OF USED SPARK plugs plus parts shipping included domestic

Here is a set of Windshield cones nuts snd filler blocks. Maybe NOS not sure. Blocks are. $35 + shipping. Email me by forum. Dan
IMG_5146.jpeg
IMG_5147.jpeg

Here are a pair of windshield filler plugs for lower frame 23/25 open car. Part number 7803brx. This is the piece that goes in the end of windshield frame so the cap can fasten on and the frame can be bolted to the uprights. When was last time you saw a pair of them NOS? $15 for pair + shipping. Email me by forum. Dan
IMG_5126.jpeg...

This is the last set I have available this year. This is an outright sale of 4 coil cores with new replacement orange drop condensers, new KW style point sets, ECCT calibrated for equal firing time. .... $425.00 USA shipping included.

Sold!!!!!!

What is the proper name for the type of fastener that is commonly used with sheet metal screws in applications where a nut and bolt can't be used. they ware always made of spring steel and can be flat or slightly curved with different sizes for different size screws and applications, I loked at McMaster-Carr but didn't really know what to call...

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

I recently started working on the engine of my model s. The main bearings have to much play. In the manual i did see the babbitt bearing is a loose bearings is that the case? Can i just press a another bearing in de block? IMG-20251223-WA0010.jpeg

I am wanting to buy one of these axle cradle tools that mount to a bench and holds the rear axle housing for assembly. Apparently, the vendors don't sell them anymore. Does anybody have one that they are willing to let go of?

Got my notice from AACA for Hershey space renewal. First year since Blue field I will not have spaces at Hershey. Not worth it . I may still go but just to walk around. Go to keep going to Luray, better to me than Hershey. Hope to see you all there. Dan

Selling this Stewart model 12 50 mph speedometer with mileage tracker used only in 1909 on model t’s asking price is 400 plus shipping. Unknown internal condition. Please call or text George 2036873827

Hi, here’s an original nickel TT hubcap. As you can see in the photo it’s much bigger than the standard size!

$10 + $7 shipping. I’m in Dayton, OH. My regular hubcap is on the right and just for reference, that’s not included. Thanks!

Dec 5th 1925 was the 100th anniversary of the first Speedway meeting at the 5/6 mile banked concrete track at Maroubra, Sydney, Australia. Ted King raced his rajo there after quick repairs were carried out after his crash at Newcastle Speedway weeks before. It was a mad rush to put the car together over 7 weeks (without body) as best as I could...

WTB Dayton #3 pin drive Knock on hub cap for pattern to cast a set of new ones for my Fronty. Damaged ok.

Still looking for at least a body filler impression of the wording and top profile of this cap or buy a readable cap.

Any help appreciated. Thanks to the member here for the use of the photos.

Have a USA address to post to. No overseas...

In El Paso, IL.

Mark your calendar.

Registration forms are out.

Tin----Lizzy----one one seven at yahoo dot com (ignore the dashes)

I have published a Worldwide index of Model T Ford clubs... which will no doubt have some entries missing :D
This index includes the websites of each Club, contact details and addresses where available.
If you know of any that need to be added, please let me know — please ensure you include a website address, physical address and contact...

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

Just a reminder that the annual old car swap meet in Marrietta, Ohio is Sat March 7th starting at 7:00 am. Lots of vendors with lots of model T and A stuff. Nice heated building with a nice lunch and pies and hot coffee. Vendors in attendance include Kevin Prus, David Nolting, Ron’s Machine Shop, The Carb Shed, The Coil Dr., with many individuals...

Constantly inspecting and cleaning up parts, I noticed something odd about my fan hub.
The belt hub itself spins true. The fan blades themselves spin true. However, the hub shaft and blade flange are spinning 0.097 off center!! The rivets for the blades were drilled true to shaft center, not with the flange.

Begs the question as to production...

Lamps. The one on the right (with magnet) has unusual steel top but otherwise complete with brass top font and burner. No cracks in glass or brass. The other, left side 110, has a dent in black painted top of chimney and back panel. This one has no burner an no cracks in glass or brass Best offer over $200 + shipping until 25 January....

A bunch of wheels for sale. All need hubs most are in ok shape. Asking $25 each plus shipping or local pickup. Please call or text only George 2036873827

For Sale is a late 1911-1912 Transmission Cover (hogshead) complete with all the linkage and petals. It is in very good condition and doesn’t show any repairs or damage. SOLD plus shipping. Lang’s 1-800-872-7871

Does anyone recognize these pressed steel brackets? Thanks for looking.

Time to do a little early spring cleaning at the garage. All items are pick up in Lake Elsinore. Mark Chaffin (951) 805-0928

20260107_102120.jpg
Assortment of 21 demountable rims $75 each.

20260107_102137.jpg
Four 24 30x3 non demountable rims. Two good. Two very good. $75 each

20260107_102200.jpg
One 450x21 tire and demountable rim. Four...

For Sale is an original 1909 - 1910 Dodge Bros. brass steering wheel spider. Good restorable condition. SOLD plus shipping. Lang’s 1-800-872-7871

Looking for a Cowl Vent Assembly to fit a 1925 Coupe, thank you!

For Sale late 11 early 12 fore doors. $300. Can send more pictures. Steve 701 212 5009

With all due respect, I am not looking for generic speculation but what I am looking for is what is considered authentic on the 'color' of Brass Glass Channel?

Was the Windshield Frame originally painted (dipped??) prior to installing the Glass Channel, -followed by the installation of the Windshield Glass, ...or was the Glass Channel installed...

Very good condition, hoping someone can use it.
See pictures 250.00 make offer.

Original steel-tank Model T radiator. Removed years ago and stored indoors. Not a reproduction.
- correct black-era for 1917-1923 Model T (including pickup)
- Original steel top and bottom tanks
-Vertical tube core (appears original/early core, not modern)
-Holds water but has small leak (likely seam or tube)
-No freeze crackes noted
-Excellent...

I am told these are for a couplet. If you need them you can have them for shipping cost

Cleaning up parts on Daisy (1914 Touring), working on the front fender irons. The headlamp pickle forks are DB's, but I'm not familiar with the mark on the actual fender iron.
Anyone?

20260106_162601.jpg

My 1924 touring is having problems in performance. The #3 cylinder is not working correctly. Have replaced all plugs, wires, cleaned all contacts in coil box, rebuilt good coils. Good compression in all cylinders (40 - 44). Yet when you short out each cylinder, #1, #2, and #4 will short out the engine, but not at #3. All 4 will spark with a strong...

With or without the distributor is ok but I would like one with the toggle & levers. I'm looking for the type with the distributor on the front, not the magneto on the side.

Located in CA but happy to pay shipping.

Saw this tool on a FB Vintage Tool I.D. Group, was unidentified by the poster.

So looked up the tool in a Stevens Speed Up Catalog. Rather useful to have when one-man replacing rivets, makes a real good bucking bar.

IMG_0357.jpeg

IMG_0358.jpeg

IMG_0356.jpeg

Would have liked that tool for last job on a crossmember, resorted to...

Not sure who produced this head, or the compression rating on it. It appears to be greater than 6 to1 but that's just my opinion. The only markings on it other that the Ford script and made in USA is a 4 at the water outlet and a 2 and 4 at the back of the top surface of the head. These numbers are raised and part of the casting.

There are no...

Price isn't too bad and everything looks to be somewhat sorted and isn't and overwhelming horde of rust junk from what can be seen in the photos . $700 buy it now. No connection.

I have a question for the coil experts. I've been rebuilding some coils, checking the primary & secondary winding's, and replacing the capacitor. I am using both an old amp type tester and ECCT tester to set these up correctly. I've done about 10 so far and 5 have a strong spark and 5 a weak spark. The resistance of the primary & secondary...

To the top-1 set remaining. All sets with the tubing and mounting bolts have been spoken for. New price for the Cover and outlet bracket only is $100.00 each including FR shipping. Extra outlet fittings- either 3 dip or 4 dip or both are available. 3/8 copper tubing and mountng bolts can be purchased locally. Thank you to everyone who purchased...

Well, the last Model T of my more than 30 year hobby has left with a shipper to its new home. What started out as the first car I bought actually turned out to be the last one I fully restored. It was a 26/27 roadster Frankencar found in Idaho and I drove from Texas to pick it up with a flatbed trailer in February, needless to say NOT the time to...

For you speedster guys. Complete schebler carburetor, Its very clean and complete,
It was part of package deal 100.00----- 20.00 shipping see pictures for more details. 561 262. 0393

Can someone help with the size and location to redrill the 4 th main oil hole, measurement from shoulder would be good. Trying to finish an engine my Dad built for me before he passed away. I can’t see any trace of the hole in the shell he had re babbited. Thanks

That time of year again!

Jan 16-17 2026 will be our schedule days!!

We have a block of rooms available at a discount of $99 a night at Hampton Inn in McPherson Kansas. Cut off to get your discounted room date is Dec 26th so book fast!

Can’t wait to see old and new faces!

Aaron Frazer

Hotel information:

200 N Centennial Dr
McPherson, KS...

For sale: Ford script wire wheel hub caps all for $65 plus postage
20241027_101908.jpg

Having a Hard time posting to classified vehicles, please remove and relocate if necessary.

Here is a link to Facebook of a Martin-Parry bodied truck I have for sale.

If you are interested or have additional questions please give me a call at 314-287-1901.

I am trying to id the side lamp brackets on this 1914 Touring I recently acquired. I have gone through all of my reference materials and can't find a match to the brackets. Maybe aftermarket accessories? The car is a late August 14 build with a Hayes body. The side lamps are Victor Model 2. Thanks in advance for any help. 14T.jpg 14bracket.jpg

A local colector and restorer has bought my 1910. Also my wife of 57 years died Dec. 10.
I will give the buyer extra T Parts.

New never on car 75.00 ,
15 shipping

Hi,
I bought a late 23 chassis and looking to build a speedster with my 14 yr old son. Rather than the traditional route (seats on plywood), I'm looking to see if anyone has a body similar to the one on the photos (or of somewhat similar design). Please let me know, happy to chat by phone too. Thank you!

A four tube Aermore No.0 whistle with a Fulton cutout. The cutout has the double butterfly valve. The cutout body has been welded to make the opening smaller. This can be removed or left as-in. Currently the cutout has approximately 1 1/2 threaded into a 2 1/4 threaded in inlet. Approximately 2 3/4 overall ID original size. Needs a good soaking to...

Happy New Year everyone! :)

Many of you will be aware by now of my Model T site, of which I'm pleased to say, gets a lot of comments about how useful people have found it.

I recently implemented a brand new feature on my Model T site, which I hope will get lots of use, and save a great deal of time!

Introducing the built-in search engine,...

See attached photos.
Fast service with no delays. Thirty-five years’ experience and 27,000 coils rebuilt.
Send me an email (only) and I will send you my telephone number, you call me, I will answer any questions and provide complete details.
Ron Patterson

I know these aren't for a Model T but are other early cars on this forum! I have ONE brand new 34x4 BF Silvertown Goodrich, black, straight side tire from Coker. I also have four new flaps. These are new, never mounted. Price is 400.00. I will also throw in two 34x4 Non-Skid tires that are really old and can only be used for display or rollers....

Up for sale is a very nice hot air pipe that I believe would be for the years of 1919-1923? Not sure it is powder coated or not, but it sure looks like it as the paint is very nice. Asking $30 with FREE Shipping to any of the lower 48 contiguous states only. Paypal preferred, using the Family and Friends option or a check will work too. If...