OT - Off topic - MTFCA Forum

OT - Off topic

Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

New Topic

615 topics

Page 1 of 7
- Jump to page:
1
2
3
4
5
…
7
Next

Topics

Replies

Views

Last post

Share Your Tractor(s) - old ones that is ;-)

Last post by Marv K « Thu Apr 15, 2021 1:07 am
Replies: 87
by A Whiteman » Sun Jun 21, 2020 5:46 pm

First post

Many of us like all sorts of things 'old and mechanical'. So here is a chance to share with us your old tractors,
Cheers
Adrian

1939 Farmall F14

15 Oct 10.JPG

1936 JD AR

Grandad as a lad.jpg

1954 David Brown Cropmaster

Duncan (2).jpg

1946 Farmall M

IMG_20180325_143925 (Medium).png

Last post

-John-
To answer Who claimed 'victory', you don't believe that their tug-of-war settled it, do you? They BOTH claimed they had proved their point. Bickering brothers kept at it with their rivalries, some which I've been privy to.... Those are different stories to be re-told.
I hope that some of you may have enjoyed the story with your own visual...

87 Replies

8322 Views

Last post by Marv K
Thu Apr 15, 2021 1:07 am
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by Burger in Spokane « Wed Apr 14, 2021 9:01 pm
Replies: 2733
by Rich Eagle » Thu Jan 10, 2019 2:20 pm
1

…

24

25

26

27

28
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

It was a sad day indeed, when Harriet passed away, and it was discovered that
she had the answer to all her hair problems right there in her blouse. The ample
endowment of bosom wax would have tamed that unruly thatch of hers, ... and
all the time, .... right there are her fingertips ! She never connected the dots ,
as they say in the dot...
2733 Replies

280551 Views

Last post by Burger in Spokane
Wed Apr 14, 2021 9:01 pm
This was trucking-Old Photos

Last post by Wayne Sheldon « Wed Apr 14, 2021 3:41 am
Replies: 578
by Herb Iffrig » Tue Dec 31, 2019 8:55 am
1

2

3

4

5

6
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

Hey there Dan H! I sure do like all the steam delivery car photos! Nice to see so many of them!
578 Replies

59715 Views

Last post by Wayne Sheldon
Wed Apr 14, 2021 3:41 am
Unusual Internal-Combustion Engines

Last post by Marv K « Tue Apr 13, 2021 5:30 pm

by Marv K » Tue Apr 13, 2021 5:30 pm

Found an index of different designs of unusual internal-combustion engines.
Most impressive of all is they did it all without any computers, just guys that had a clue.

Unusual Internal-Combustion Engines for Autos etc.....
An enormous variety of unconventional internal combustion engines have been invented, almost universally with total lack of...

0 Replies

105 Views

Last post by Marv K
Tue Apr 13, 2021 5:30 pm
FJ - Some Humor To Brighten Your Day

Last post by Fordwright « Mon Apr 12, 2021 1:22 pm
Replies: 904
by FreighTer Jim » Tue Feb 26, 2019 4:44 am
1

…

6

7

8

9

10
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

Rare photo of a stork delivering a baby:
Rare photo of stork delivering baby.jpg
904 Replies

123146 Views

Last post by Fordwright
Mon Apr 12, 2021 1:22 pm
Lost My Mind - Bought a Flanders 20 (Model T Competitor)

Last post by Kaiser « Mon Apr 12, 2021 7:25 am
Replies: 114
by CudaMan » Thu Nov 12, 2020 5:16 pm
1

2
First post

Well, I went and did it - I bought the Flanders 20 that was advertised in the HCCA classifieds, see the attached pics. The Flanders 20 was built by EMF as a direct competitor to the Model T Ford, but Ford just lowered his prices to maintain his market dominance. The original cars came with a terribly fragile two-speed transaxle, but were recalled...

Last post

Well at least they don't rattle around on bad roads :lol:
114 Replies

4934 Views

Last post by Kaiser
Mon Apr 12, 2021 7:25 am
OT- Wife and dementia

Last post by Dan Haynes « Thu Apr 08, 2021 11:30 pm
Replies: 15
by ironhorse » Wed Mar 24, 2021 8:43 am

First post

Man, it has been forever since I have been to the forum (lucky I remembered my user name and password). I'm not mad at anyone nor have I dropped off the face of the earth. About 2 years ago my better half and started having Nightly Fights about nothing really but enough that I thought we were headed to the Big D after 38 years of marriage. Then...

Last post

I think this is the video I was trying to link. I don't know what happened last time.

But really, watch Alive Inside . Find it and watch it.

15 Replies

873 Views

Last post by Dan Haynes
Thu Apr 08, 2021 11:30 pm
Here's a tough ID. Help !!

Last post by ModelT46 « Thu Apr 08, 2021 6:14 pm
Replies: 5
by Rich Bingham » Wed Apr 07, 2021 11:42 am

First post

So much of the car is covered up by the curious bystanders who are looking at their very first auty-mobile. Any thoughts as to make and year ?

Last post

It is a Winton for sure.

5 Replies

328 Views

Last post by ModelT46
Thu Apr 08, 2021 6:14 pm
Message from your wife.

Last post by Rich Eagle « Thu Apr 08, 2021 2:37 pm
Replies: 2
by Roffe » Wed Apr 07, 2021 9:26 am

First post

Oh well .....

Last post

As if we needed more.
BScissorz.jpg
BPhonexx.jpg

2 Replies

620 Views

Last post by Rich Eagle
Thu Apr 08, 2021 2:37 pm
Pre COVID and post COVID haircut

Last post by Oldav8tor « Thu Apr 08, 2021 10:24 am
Replies: 7
by Norman Kling » Tue Mar 30, 2021 4:34 pm

First post

The last haircut was in February 2020, then the lock down. It's been over 3 weeks since the second shot and now the barber is open again. So I finally had a load lifted from my shoulders. Longest it has been in 85 years1 :lol:
March 30 2021 001.JPG March 30 2021 005.JPG March 30 2021 003.JPG March 30 2021 007.JPG

Last post

At least you fella's with long hair look somewhat normal. When you're bald on top you end up looking like a gray-haired clown if you let it grow long. My wife bought a clipper kit and we took turns butchering each other until I finally went to a barber last week. I'll spare you any photos.

7 Replies

439 Views

Last post by Oldav8tor
Thu Apr 08, 2021 10:24 am
What have you done on an old non-Model T vehicle.

Last post by Rich Eagle « Tue Apr 06, 2021 5:51 pm
Replies: 182
by Rich Eagle » Mon Mar 25, 2019 11:38 am
1

2
First post

It became important for me to do something with the 1919 Harley-Davidson engine. The bike has been gaining in value and parts since the acquisition of a basket case in 1973. A total rebuild isn't an option for me at this time but I believe I can reassemble it and at least get all the parts in one place and maybe fire it up. One of the crank pin...

Last post

The guy in Montana knows a heck of a lot more about carburetors than I do.
I found these pictures today. The Buick didn't have it's turtle deck when I got it. Therefore there was no hardware for it. A fellow in El Cajon was kind enough to take one of his hinges off and put it on a copy machine. Some of you may remember Jack Garrison. I was able to...
182 Replies

31360 Views

Last post by Rich Eagle
Tue Apr 06, 2021 5:51 pm
International auto buggies and auto wagons

Last post by Rich Eagle « Tue Apr 06, 2021 11:43 am
Replies: 2
by Mark Gregush » Tue Apr 06, 2021 3:49 am

First post

Something fun and different;

Last post

That is wonderful. The illustrations and artwork are fantastic.
Thanks
Rich

2 Replies

210 Views

Last post by Rich Eagle
Tue Apr 06, 2021 11:43 am
Pretty Brass Carbs.

Last post by PDGx « Sun Apr 04, 2021 9:27 am
Replies: 16
by Duey_C » Wed Apr 29, 2020 11:33 pm

First post

You all know Uncle Stan Howe as an automobile carburetor restoration specialist. Stromberg OS might just be a specialty...
I know something others may not know... Stan does Old Tractor carburetors too. Sshhh...

Note how Old Tractor and OT fit together? Huh? Huh? See it? Huh? :lol: :lol: :D

Just wanted to show a carb that Stan had put on his...

Last post

Make sure you two post videos (with sound) of starting them the first time !

16 Replies

2169 Views

Last post by PDGx
Sun Apr 04, 2021 9:27 am
April Fool

Last post by BHarper « Sat Apr 03, 2021 1:13 pm
Replies: 3
by Oldav8tor » Thu Apr 01, 2021 6:24 pm

First post

I had a plan today. I was going to drive my T to a dentist appointment in a nearby town and then pull into the local Ford dealer and ask for a free multipoint inspection . April fools, right? Well, the joke was on me. This is what I saw when I got up this morning. Needless to say, I drove my modern Jeep, not the T. It's supposed to be back near...

Last post

A number of years ago, I was planning to go for a First Day of Spring ride around town.
I awoke to unexpected snow.

I went out anyway.

199155.jpg

3 Replies

366 Views

Last post by BHarper
Sat Apr 03, 2021 1:13 pm
Value of Cushman Engine-Model C, 4 hp (Binder engine?)

Last post by david_dewey « Sat Apr 03, 2021 3:43 am
Replies: 22
by david_dewey » Sun Feb 14, 2021 3:01 am

First post

Today I picked up a little vertical gas engine, Cushman Model C, 4hp according to the brass serial number tag. Tried looking it up on the internet, but kept getting Cushman Scooters and parts. Brass carb, looks fairly complete, except really rusty! Was just wondering if I got a good deal or zonked.
Going back tomorrow to pick up a '26 style...

Last post

Thanks for pointing that out and posting it. Yes, I could do something like that with Barney!! Hmmmm. . .

22 Replies

1144 Views

Last post by david_dewey
Sat Apr 03, 2021 3:43 am
Are you a better internet searcher than I am?

Last post by Burger in Spokane « Fri Apr 02, 2021 10:24 pm
Replies: 7
by Steve Jelf » Fri Apr 02, 2021 5:34 pm

First post

For well over a century wiring has been connected to switches and outlets by slotted 8-32 pan head brass screws.

IMG_5968 copy.JPG
Unfortunately sometimes these screws get lost, and so far my search for replacements has come up with zip. Brass is easy, and 8-32 is easy, but slotted pan head is the killer. I wonder if anybody here can find a...

Last post

This is why you choose to know a guy like me. I salvage all sorts of stuff
like this for my business.

7 Replies

231 Views

Last post by Burger in Spokane
Fri Apr 02, 2021 10:24 pm
Laser Cleaning - does it really work like the Youtube says it does?

Last post by A Whiteman « Fri Apr 02, 2021 7:58 pm

by A Whiteman » Fri Apr 02, 2021 7:58 pm

Well, the topic heading says it all. Does anyone have experience with this form of cleaning?
If so what was your outcomes like?
Are there problems or limitations cleaning say old brass carbs?

Any feed back appreciated.

0 Replies

124 Views

Last post by A Whiteman
Fri Apr 02, 2021 7:58 pm
Hyatt bearings, is this how they were made?

Last post by Rich Eagle « Thu Apr 01, 2021 10:47 am
Replies: 2
by Herb Iffrig » Wed Mar 31, 2021 9:08 am

First post

Or were they a flat piece that was wound around a shaft?

Some model makers would like to have some little chain lik fence iguess.

Last post

Interesting video.
Wikipedia tells me helical-shaped rollers made from flat spring steel were more flexible than solid-cylinder rollers .
Years ago I thought they were just grooves in the roller until I found grease inside. I made rollers from drill rod for my Buick when I couldn't find the Hyatts. They work OK and I don't drive it much.
Rich

2 Replies

263 Views

Last post by Rich Eagle
Thu Apr 01, 2021 10:47 am
Nice night for a drive.

Last post by John Warren « Tue Mar 30, 2021 9:00 am
Replies: 4
by Mopar_man » Fri Mar 26, 2021 10:43 pm

First post

So I took my wife's Super Bee out for the first time in a long time. Even got caught in traffic. It got a bit hot but still ran great. Taking it to a show tomorrow.

IMG_4245.jpeg

Last post

Very Nice!

4 Replies

258 Views

Last post by John Warren
Tue Mar 30, 2021 9:00 am
Obese, hell I didn't even think I was overweight

Last post by TRDxB2 « Tue Mar 30, 2021 12:18 am
Replies: 93
by Tom Hicks » Thu Apr 18, 2019 8:34 am

First post

At 5'10 and 215 lbs. I knew I had a little extra weight on me, but I did not consider myself fat. BMI chart indicated over 30, that is clinically obese.

I am not the only one who has suffered from this problem, and I blame doctors first and foremost. Primary Care Physicians need to get honest with their patients about weight. There are other...

Last post

Have been on Weight Watchers and learned some interesting point about loosing weight. Obviously to loose weight you need to burn off (exercise) more than you take in. The point of exercising was to stimulate the metabolism not just too burn off calories (3 times 10minutes a day). The exercise was not the cardiovascular type but just a little walk,...

93 Replies

12779 Views

Last post by TRDxB2
Tue Mar 30, 2021 12:18 am
Ford's Turbine Truck?

Last post by Fordwright « Mon Mar 29, 2021 1:07 pm
Replies: 1
by Marv K » Mon Mar 29, 2021 12:08 pm

First post

An interesting article! Never knew Ford had experimented with 'Turbine Technology', and as early as 1925....

Last post

Over the years, several ventures were started based on turbines. Most of them failed because a cost-effective turbine failed to materialize.
Two places where it worked were in large ships and airliners.

1 Replies

129 Views

Last post by Fordwright
Mon Mar 29, 2021 1:07 pm
Recommendations needed for a masonry contractor in the Richmond,Va area R

Last post by jiminbartow « Sun Mar 28, 2021 12:46 am
Replies: 1
by geneabb » Sat Mar 27, 2021 4:42 pm

First post

Hi club members:

My son recently bought a house in Richmond, Va and since he is new to the area he is looking for recommendations for a mason or hardscape contractor to build a patio for him. I'm in the Blue & Gray chapter in central Maryland so am unable to give him any help.

If anyone could give me some recommendations that I can forward to...

Last post

I live in Florida but went online to Craig’s List, Richmond, VA and found a “concrete finisher” on page 3 under “Jobs” - “skilled trade/craft”. Good Luck. Jim Patrick

1 Replies

153 Views

Last post by jiminbartow
Sun Mar 28, 2021 12:46 am
Cleveland Six Model 40

Last post by Michael Peternell « Sat Mar 27, 2021 10:14 pm
Replies: 2
by Michael Peternell » Sat Mar 27, 2021 3:45 pm

First post

First start.
11109.jpeg IMG_20161113_142918256.jpg IMG_20170101_085205_1.jpg IMG_20190419_082257201.jpg
They were a little rough when I brought them home

Last post

Can't wait to put the original Stan Howe eye candy carb on it . Both engines had the original carbs on them. I'm guessing you might know the collector in Eastern ND I got the cars from!

2 Replies

187 Views

Last post by Michael Peternell
Sat Mar 27, 2021 10:14 pm
Paintings that aren't Model Ts

Last post by Rich Eagle « Sat Mar 27, 2021 12:51 pm
Replies: 128
by Rich Eagle » Thu Mar 14, 2019 9:54 am
1

2
First post

Finally I have stopped working on this one. After 170 hours it is not getting any better. I will turn it to the wall for a few months and then decide if I like it.
ModelS.jpg
You may recall that Herb offered this terrific photo a while back:

and Rob discovered some amazing information on Doctor Pagel who likely owned it:

Here are some steps...

Last post

Thanks Dallas. It was been a good year for painting. I'm ready for warmer weather so I can work on the cars tho.
Rich
128 Replies

19559 Views

Last post by Rich Eagle
Sat Mar 27, 2021 12:51 pm
Inguinal hernia

Last post by otrcman « Fri Mar 26, 2021 5:39 pm
Replies: 20
by jiminbartow » Tue Mar 16, 2021 1:14 pm

First post

Since The end of December, beginning of January, I have been having a sharp burning pain just to the left of my groin that especially hurts when I strain, such as when I cough, or sneeze, lift anything or sit down or get up.

One week ago, on March 9, I went to the VA emergency room and I spent most of the day undergoing tests. Blood test, urine...

Last post

There's not much funny about having somebody come at you with a knife, even if he is a surgeon. But one of my co-workers hernia procedure did give him a humorous story to tell.

Jim was scheduled for a hernia repair and was told it would be a one-day affair. Surgery in the morning and bring a friend to drive him home in the afternoon. He woke from...

20 Replies

758 Views

Last post by otrcman
Fri Mar 26, 2021 5:39 pm
Photo aficionados: Daguerreotypes

Last post by jiminbartow « Wed Mar 24, 2021 6:46 pm
Replies: 5
by jiminbartow » Mon Mar 22, 2021 10:38 pm

First post

This is for anyone who has ever been interested in photography and daguerreotype photos. Daguerreotypes were developed in 1839 and were the main style of photographs throughout the 1840’s and 1850’s until the 1860’s. It is puzzling as to why the vast majority of images from this era are of less than attractive subjects so that when a rare one...

Last post

Yes. To remedy this discomfort there was an adjustable neck support with a long shaft that went to the floor that helped the subject endure the long time one had to stay still. It was positioned directly behind the subject and, if positioned properly, was not visible in the photo. That is one of the reasons the subjects back then, look so upright...

5 Replies

309 Views

Last post by jiminbartow
Wed Mar 24, 2021 6:46 pm
For the bikers

Last post by perry kete « Tue Mar 23, 2021 7:26 am
Replies: 10
by Rich Bingham » Mon Mar 08, 2021 11:04 am

First post

Not the best angle, but this 1913 photo kinda shows the fun and excitement over a brand-new Excelsior !

Last post

1936 chairoit race.jpg

10 Replies

562 Views

Last post by perry kete
Tue Mar 23, 2021 7:26 am
Centurylink EMAIL format

Last post by DLodge « Mon Mar 22, 2021 10:31 am
Replies: 2
by DickC » Sun Mar 21, 2021 9:36 am

First post

I have just figured out how to return to the original and user friendly format from the new and improved version being offered by Centurylink. For some reason these sites seem to want to change the offering without regard to improving data or function. They employ computer gurus who want to change for the sake of change. I guess that by employing...

Last post

Model T people have generally learned the important adage, If it ain't broke, don't fix it. People who work in IT seem to follow a different philosophy. If it ain't broke, then keep 'improving' it until it is.

2 Replies

168 Views

Last post by DLodge
Mon Mar 22, 2021 10:31 am
Here's your sign

Last post by Ruxstel24 « Sun Mar 21, 2021 3:01 pm
Replies: 15
by Dallas Landers » Tue Feb 23, 2021 3:46 pm

First post

My cousin thought I needed this sign😁 20210223_141920.jpg

Last post

:P It’s a tough job but somebody’s gotta do it :lol:

15 Replies

1140 Views

Last post by Ruxstel24
Sun Mar 21, 2021 3:01 pm
Show us your hit n miss engines

Last post by Angmar « Fri Mar 19, 2021 9:06 am
Replies: 34
by Angmar » Fri Jul 31, 2020 12:25 pm

First post

I am not sure if this topic is in here someplace or not but I was encouraged to post on the subject from 2 other members so here it goes. Hope you guys like it. This is one of my other toy's or hobbies. 1926, 25 horse Witte throttle governed. Weighs about 4500 lbs, runs like a Swiss watch.

Last post

Nice carts. Like the United.

34 Replies

3619 Views

Last post by Angmar
Fri Mar 19, 2021 9:06 am
How about a identification thread

Last post by TRDxB2 « Wed Mar 17, 2021 1:47 am
Replies: 4
by FATMAN » Mon Mar 15, 2021 3:49 pm

First post

I know a lot of folks here buy a lot of t parts at sale and auctions and always there is more in the box than Model T parts, it would be nice if there was a web site where folks could list photo's- part numbers to see what it is, most things get trashed or put on a shelf, this could help out a lot of folks, what do you think? Bob

Last post

There is already a site like what y our suggesting but as you can see it isn't what you would want.
What you really looking for is Image Recognition Software -
However stuff like this only works if it has an image like the one your searching for. Also the answer is what was previously recorded right or wrong.
Download the app and take a picture...

4 Replies

295 Views

Last post by TRDxB2
Wed Mar 17, 2021 1:47 am
Help ID a car

Last post by Herb Iffrig « Tue Mar 16, 2021 11:03 pm
Replies: 2
by Herb Iffrig » Tue Mar 16, 2021 8:40 pm

First post

Not the type of photo that lets you id the car but maybe someone can help a friend that wants to know. Busch.JPG

Last post

Thanks James.

2 Replies

163 Views

Last post by Herb Iffrig
Tue Mar 16, 2021 11:03 pm
Stewart Warner Vehicle Radios

Last post by TXGOAT2 « Sun Mar 14, 2021 2:23 pm
Replies: 21
by PDGx » Sun Feb 07, 2021 8:09 pm

First post

Anyone an antique radio expert ?

Trying to find some information on this Ford/Stewart Warner, but haven’t been able to determine the model or any identifying number.

C02547D7-C5C7-4AAC-A033-3F7EC1E60E86.jpeg 0DCA899D-07A9-41BA-9F84-67052D597605.jpeg

The remote is mounted to the steering column, and the radio unit is floor mounted.

There are...

Last post

It's very clean and complete. Remarkabley so. It looks as if some capacitors may already have been replaced at some point. It was probably long ago, and they likely need replaced again. You aren't likely to find any to physically match the originals, but functional equivalents should be available, and they will probably be a lot smaller than the...

21 Replies

835 Views

Last post by TXGOAT2
Sun Mar 14, 2021 2:23 pm
For any one thinking about going to Luray this may.

Last post by Dan Hatch « Sun Mar 14, 2021 11:01 am

by Dan Hatch » Sun Mar 14, 2021 11:01 am

For any one going to Luray from South using I-81 here is a link about work being done on it. If you ever traveled 81 you how bad it can be. Dan

0 Replies

170 Views

Last post by Dan Hatch
Sun Mar 14, 2021 11:01 am
When at Chickasha

Last post by Ejl « Fri Mar 12, 2021 9:41 pm

by Ejl » Fri Mar 12, 2021 9:41 pm

When walking around swap meets and you see Metz parts please send me the vendors contact information. Thank you Gene

0 Replies

206 Views

Last post by Ejl
Fri Mar 12, 2021 9:41 pm
White speedster

Last post by Burger in Spokane « Wed Mar 10, 2021 1:36 pm
Replies: 2
by Kaiser » Wed Mar 10, 2021 10:43 am

First post

I know there are certain White afficionados lurking on here, now look what i came across...
Soon to be for sale at Hyman's....
Feast your eyes on this !;

White speedster.jpg

Last post

Looks unfinished. It needs those big White headlights and some swoopy
Mercer-type fenders, and it would be perfect !

2 Replies

301 Views

Last post by Burger in Spokane
Wed Mar 10, 2021 1:36 pm
Sick Dodge

Last post by Steve Jelf « Mon Mar 08, 2021 10:35 pm
Replies: 8
by Steve Jelf » Sat Mar 06, 2021 5:59 pm

First post

The old truck starts easily, with just a touch of the starter pedal. But it sure runs rough. The video doesn't do it justice. It sounds rougher in real life. I have a suspicion of what the problem is, but thought I'd ask if anybody has a suggestion of what to look for first.

Last post

Some of the suggestions are along the lines of what I was suspecting. Thanks to all. I'll start checking into things when I have a nice day for working outside. :)

8 Replies

503 Views

Last post by Steve Jelf
Mon Mar 08, 2021 10:35 pm
An odd question about sound.

Last post by D Stroud « Mon Mar 08, 2021 6:15 am
Replies: 11
by rfunkhouser » Fri Feb 12, 2021 10:05 am

First post

Hello!

My name is Rob and I work at the Rhythm Discovery Center, a percussion museum, in Indianapolis. I was invited to register to this forum by the admin from the Model T club in order to ask you guys about something a little strange that I am hunting.

Basically I am wondering if anyone has any older brake drums from a ford that I can hear the...

Last post

I saw an old episode of boxing on a TV show from back in the '50's a few years ago. The 'bell' was was a an eight hole brake drum from a 3/4 ton truck, sounded great. Dave

11 Replies

774 Views

Last post by D Stroud
Mon Mar 08, 2021 6:15 am
Coach Light- Free (Just Pay The Postage)

Last post by GEmering « Sun Mar 07, 2021 3:44 pm

by GEmering » Sun Mar 07, 2021 3:44 pm

The coach light pictured here was given to me by someone who thought it was antique auto related.
I really don’t have a use for it.
Can anyone use it?
Just pay for the ride from New Jersey and it’s yours.

Gene

0 Replies

200 Views

Last post by GEmering
Sun Mar 07, 2021 3:44 pm
Improving dirty clear edge guard on a Toyota?

Last post by ThreePedalTapDancer « Sat Mar 06, 2021 8:25 pm
Replies: 3
by ivaldes1 » Sat Mar 06, 2021 12:15 am

First post

Hi I am seeking advice on how to clean these. I bought my used Toyota Sienna a few years ago. It has these clear probably plastic door edge guards that are dirty under the plastic. I would like to clean them for a special occasion. Is there a way? Should I just take them off and start over? If so what is a replacement? Thanks!

Last post

It needs to be peeled off and replaced. Replace with 3M clear door edge guard. Plenty of videos on how to apply on YouTube.

3 Replies

225 Views

Last post by ThreePedalTapDancer
Sat Mar 06, 2021 8:25 pm
Capacitors to replace condensors: T's and other things.

Last post by TXGOAT2 « Sat Mar 06, 2021 1:14 pm
Replies: 15
by Duey_C » Sat Jan 16, 2021 12:36 am

First post

Back story . I can't recall the values but we regularly replace the condensers with capacitors in our model T coils. Old news.
I have orange drop capacitors for my Twin City tractor magnetos that we also regularly replace the aging condensers. Old news.
American Bosch ZR-4's, U-4's and would be perfect for DU-4's also. Funny, some replacement mags...

Last post

I think the correct value (capacitance) of a capacitor/condenser in an ignition system is determined by the coil's characteristics. A value anywhere near correct will work, but the closer to the proper value, the longer the points will last.

15 Replies

902 Views

Last post by TXGOAT2
Sat Mar 06, 2021 1:14 pm
Big engine pics Fire Truck

Last post by dmdeaton « Sat Mar 06, 2021 12:54 pm
Replies: 4
by dmdeaton » Sat Mar 06, 2021 10:21 am

First post

FBD90662-E6B0-43D6-83B6-C4B67A1C9065.jpeg 5088F5F1-7D2F-4A6D-A4B8-ACA8E68354A7.jpeg 640FA8C6-F8B1-4D27-9A21-A4E39CB2C183.jpeg

Last post

Yes they are

4 Replies

219 Views

Last post by dmdeaton
Sat Mar 06, 2021 12:54 pm
So this just came

Last post by PDGx « Thu Mar 04, 2021 1:38 pm
Replies: 2
by Mopar_man » Thu Mar 04, 2021 1:24 pm

First post

B0AEF407-E79F-4955-98BF-AFA2A10CB59A.jpeg

Last post

Oh no not the sideways phone picture! That’s gonna get people mad!!

Open the cover up and take the whole front/back photo in landscape 😀 (or they can wait for theirs to arrive)

2 Replies

316 Views

Last post by PDGx
Thu Mar 04, 2021 1:38 pm
Henry Ford's Rubber Plantation

Last post by Mopar_man « Wed Mar 03, 2021 9:57 pm
Replies: 2
by dasiver » Mon Feb 15, 2021 11:11 pm

First post

Don't think I have ever seen this topic discussed on the Forum. Science channel has a series called Mysteries of the Abandoned and they had a segment on the plantation and city Henry built in the Amazon rain forest in 1928. He was going to grow his own rubber to cut out the middle man in the product. City housed about 2000 people, didn't work out...

Last post

In the MTFCI magazine a young man wrote a nice essay about it.

2 Replies

412 Views

Last post by Mopar_man
Wed Mar 03, 2021 9:57 pm
1910 in Hailey, Idaho

Last post by Rich Eagle « Wed Mar 03, 2021 11:07 am
Replies: 4
by Rich Bingham » Mon Mar 01, 2021 11:25 am

First post

Identify ? Photo notes say the building houses The Wood River Times newspaper.

Last post

Thanks for the link Tim. It does support my idea of it being an Olds. It's very similar and perhaps a different trip with a different model.

4 Replies

385 Views

Last post by Rich Eagle
Wed Mar 03, 2021 11:07 am
Need Metz parts

Last post by Ejl « Mon Mar 01, 2021 6:58 pm
Replies: 7
by Ejl » Sat Feb 27, 2021 3:16 pm

First post

First time posting. I'm in need of Metz parts and would like to meet owners of Metz automobile. I'm posting here because I read this forum every day which has very helpful information on any car your working on. Any help would be appreciated.I can be pm here.Thank you Gene

Last post

Thank you guys for the links Gene

7 Replies

414 Views

Last post by Ejl
Mon Mar 01, 2021 6:58 pm
Cold weather

Last post by ivaldes1 « Wed Feb 24, 2021 1:13 am
Replies: 3
by Norman Kling » Sat Feb 20, 2021 1:32 pm

First post

Just wondering how everyone in the north and middle part of the country are doing. I have heard about power outages, and clean water shortages, and even some food shortages. I am very thankful that things out on the southwest coast are warm and sunny. Only fallout here is a shortage of the COVID vaccine due to delivery problems.
I hope things...

Last post

Last week in Texas was a mess. Houston Texas nearly never stays below freezing for more than a day. It was in the teens for about 5 days -- highly unusual for Texas. I know of nearly no one who didn't lose power for significant periods of time and then the pipe breaks began with loss of water pressure and the boil water alerts. Everything shut...

3 Replies

427 Views

Last post by ivaldes1
Wed Feb 24, 2021 1:13 am
Unknown speedster-Old Photo

Last post by John Warren « Mon Feb 22, 2021 11:57 am
Replies: 5
by Herb Iffrig » Thu Jan 21, 2021 8:04 am

First post

speedster unknown.JPG

Last post

targaflorio02gaggenauhyeronumus.jpg

5 Replies

631 Views

Last post by John Warren
Mon Feb 22, 2021 11:57 am
Meanwhile in Montana

Last post by John Warren « Fri Feb 19, 2021 7:58 pm
Replies: 8
by Rich Bingham » Thu Feb 18, 2021 2:12 pm

First post

Identify this skunk wagon please ? Photo date unknown, as are the tribesmen.

Last post

Wow. that is really something to see the Native American Indians in cars. Love the photos. As a child I spent a couple of years on an Indian reservation. The company Dad worked for was paving some highways in Arizona.

8 Replies

637 Views

Last post by John Warren
Fri Feb 19, 2021 7:58 pm
Henry Ford's quadricycle

Last post by John Warren « Mon Feb 15, 2021 5:11 pm
Replies: 3
by Fordwright » Mon Feb 15, 2021 12:45 pm

First post

I've seen conflicting reports about what became of Ford's first driveable automobile, the Quadricycle. Most sources say it was lost, and Henry Ford built a reproduction for his museum. I'm reading a fairly recent book that says he initially sold it for $200 to raise money, but he bought it back a few years later for $60. The book is: I Invented...

Last post

1896_Ford_Quadricycle_W-Henry_Ford_Clara_Ford_and_Henry_FordJR.jpg

3 Replies

371 Views

Last post by John Warren
Mon Feb 15, 2021 5:11 pm
Removing old paint and rust

Last post by jiminbartow « Sun Feb 07, 2021 11:26 pm
Replies: 7
by Robert Bente » Mon Jan 04, 2021 12:07 pm

First post

70B44BE4-FCDC-403A-90AD-8B6F7B345B6D.jpeg I’m looking for some ideas on the best way to strip rust and paint from a frame, axles, springs, and rear.
Wire wheel, chemicals, sand, scrap???
Thanks for your ideas.
Robert Bente
Redding, Ca.

Last post

I personally do not like sandblasting, because it irreparably distresses, and roughens the surface from the original smooth steel factory finish that lies under the paint and rust. To me, sandblasting is the lazy man’s way to remove rust and paint. First of all don’t be in a big hurry. Do it in stages. First, remove the paint using Jasco gel type...

7 Replies

873 Views

Last post by jiminbartow
Sun Feb 07, 2021 11:26 pm
is there any copyright issue

Last post by FreighTer Jim « Thu Feb 04, 2021 8:53 pm
Replies: 2
by chris012 » Wed Feb 03, 2021 12:40 am

First post

hi, If I use the image of ford model T in the flyer or some other infographics. I just want to know this before publishing my article about mallet putters. I want this image is on putters grip because I love this model too much. It is always my favorite. I feel proud If this image is on the grip of putters which I will sell on my affiliate...

Last post

hi, If I use the image of ford model T in the flyer or some other infographics. I just want to know this before publishing my article about classic old cars. kindly guide me if there is any issue I will not use it.

If you find an image on a Google search.

If the image does not have a watermark across
it or a copyright mark on it - it is in the...

2 Replies

428 Views

Last post by FreighTer Jim
Thu Feb 04, 2021 8:53 pm
AACA sign up troubles.

Last post by Duey_C « Tue Feb 02, 2021 10:27 pm
Replies: 2
by Duey_C » Sat Jan 30, 2021 12:20 am

First post

Seems as if their site doesn't like Mozilla based web browsers.
Tried to sign up to ask a question about a Howe Stromberg M-3 carb with a particular throttle lever for a National automobile owner in 2000-11.
Got in, typed in the answers yet something was wrong. The site didn't say what was wrong.
Thoughts?

Last post

I did get to the second security question today Jim.
27032. If I make a mistake it looks like this. I fixed it. See next pic.
28572. Better but still not passing.
29894. Oops. If I try this I know I made a mistake.
OK, perhaps no mistakes can be made at all so I went back after x'ing out. Trouble is, they remember me now.
After a couple tries...

2 Replies

317 Views

Last post by Duey_C
Tue Feb 02, 2021 10:27 pm
Dragonman's Military Museum

Last post by ThreePedalTapDancer « Mon Feb 01, 2021 12:57 am
Replies: 2
by Herb Iffrig » Sun Jan 31, 2021 7:45 pm

First post

A friend just sent this link to me. I thought some here would appreciate seeing this:

Last post

Interesting guy. He is known as the most armed man in America. An arms dealer with a Class III license, he can and does own every conceivable weapon, and shoots them all.

2 Replies

294 Views

Last post by ThreePedalTapDancer
Mon Feb 01, 2021 12:57 am
Millers falls sharpening stone

Last post by Jerry VanOoteghem « Sun Jan 31, 2021 5:27 pm
Replies: 8
by Herb Iffrig » Sat Jan 30, 2021 7:01 pm

First post

Has anyone ever seen one of these in real life ? millers falls tools.JPG

Last post

Thanks Brent and Jerry. I guess I will look for a scroll saw to get an idea of what is missing on mine.

Millers Falls made a few different sizes. I believe the New Rogers is one of the larger ones and most likely the closest relative to your grinder.

8 Replies

426 Views

Last post by Jerry VanOoteghem
Sun Jan 31, 2021 5:27 pm
Shipping airplanes WWI -Old Photo

Last post by Herb Iffrig « Sat Jan 30, 2021 6:50 pm

by Herb Iffrig » Sat Jan 30, 2021 6:50 pm

I could have put this in the This was Trucking thread, but I thought it needed a airplane in crate.JPG special discussion.

airplane in crate back.JPG

0 Replies

305 Views

Last post by Herb Iffrig
Sat Jan 30, 2021 6:50 pm
COVID

Last post by Jerry VanOoteghem « Fri Jan 29, 2021 11:17 am
Replies: 2
by dmdeaton » Wed Jan 13, 2021 9:54 pm

First post

Ron Miller of miller’s machine shop in shandon Ohio is in the hospital this week with COVID. He has been up and down and we are praying for him. He helped me get into this hobby a few years ago and is a good friend. I am sure a bunch of you know him.

Last post

Is there any news on Ron? Such a great family. So sorry to see this... Prayers!

2 Replies

501 Views

Last post by Jerry VanOoteghem
Fri Jan 29, 2021 11:17 am
Already 16 months since I visited the museum?

Last post by FreighTer Jim « Fri Jan 29, 2021 3:53 am
Replies: 2
by Grizwaldo » Mon Jan 18, 2021 9:29 pm

First post

October 2019 I needed to get to Stutzman's to pick up some wheels,get an engine in Amherst (OH) and deliver an ebay sale item in Missouri. Seemed real easy to stop by Richmond,In and see the museum. I was a bit disappointed pulling into the parking lot,modern bldg,big but not huge. There was a young man in there manning the place and some other...

Last post

What you didn’t see 👁

The local volunteers that donated countless hours
to transition the original museum and the annex
into what stands today in the ❤️ of
Old Downtown Richmond, Indiana.

“ The Museum That Saved The Town
And The Town That Saved The Museum “

That is me quoting myself 👍

Someday .....

The Vintage Ford will dedicate an issue to...

2 Replies

345 Views

Last post by FreighTer Jim
Fri Jan 29, 2021 3:53 am
model a 1930-aa-4 speed transmission

Last post by Mark Gregush « Tue Jan 26, 2021 11:36 am
Replies: 6
by Richard G » Mon Jan 18, 2021 8:39 pm

First post

whats the best fix on the shift lever that allows the tranny to stick between two gears. i'm told the ball is worn,--weld and re shape ? i have not taken it apart yet, just trying to get some idea. thanks-- greg

Last post

Just clamp the tower in a vice, no need for all that fancy holder. (Nice job building it) Make sure the vent hole in the casting is open. It is about half way up on the back side. If you don't you will be blowing lube out the transmission.

6 Replies

638 Views

Last post by Mark Gregush
Tue Jan 26, 2021 11:36 am
What is this fancy thing?

Last post by Michael Peternell « Sat Jan 23, 2021 10:16 pm
Replies: 4
by Herb Iffrig » Sat Jan 23, 2021 9:23 am

First post

fancy thing.JPG

Last post

Fragrant mound condensor ?

Made the Clearing throat noise! That's funny!

4 Replies

546 Views

Last post by Michael Peternell
Sat Jan 23, 2021 10:16 pm
High Wheeler

Last post by ChrisB « Fri Jan 22, 2021 1:09 pm
Replies: 21
by Rich Bingham » Wed Jan 13, 2021 9:19 pm

First post

I never thought of these as actual automobiles and because of that I pretty much overlooked them as I studied old cars. Can anyone identify this little cutie ?? No wonder they terrified horses !

Last post

We own a 1911 Sears high wheeler. Have not driven it much it is very hard to start, although the previous owner fitted a NH carb.

21 Replies

1361 Views

Last post by ChrisB
Fri Jan 22, 2021 1:09 pm
Prayers for Lloyd Hansen, Model T guy in Oroville, CA

Last post by david_dewey « Thu Jan 21, 2021 11:51 pm
Replies: 4
by david_dewey » Thu Jan 14, 2021 8:28 pm

First post

I just posted this on the main forum, but just in case it is considered off topic I will also post it here.
Just found out my T friend Lloyd Hansen, who has driven Ts all his life and has some great projects around his place (besides helping me out bunches with my T) is going to have a 4-way bypass and carotid artery bypass tomorrow morning...

Last post

Lloyd made it home today! He's doing very well in the healing mode. The staff said he was walking too fast. and he's healing faster than younger patients they have had. Good news! Now to keep him from over-doing!

4 Replies

456 Views

Last post by david_dewey
Thu Jan 21, 2021 11:51 pm
Touring Body, Please Help ID

Last post by Dallas Landers « Fri Jan 15, 2021 4:52 pm
Replies: 4
by Ruxstel24 » Thu Jan 14, 2021 2:53 pm

First post

A friend found this while looking at a 27 T...
Looks to be larger than a T. Anyone have an idea ?
The cowl lights are electric....

Last post

I think you hit it Dave. The windshield frame and the front door turns up at the cowl the same.

4 Replies

436 Views

Last post by Dallas Landers
Fri Jan 15, 2021 4:52 pm
Completely OT- Making a scarf joint

Last post by Herb Iffrig « Thu Jan 14, 2021 9:38 pm

by Herb Iffrig » Thu Jan 14, 2021 9:38 pm

Part three of a multi part series on repairing a barn.

0 Replies

339 Views

Last post by Herb Iffrig
Thu Jan 14, 2021 9:38 pm
Not a Ford - identify ?

Last post by Grizwaldo « Tue Jan 12, 2021 11:04 am
Replies: 10
by Rich Bingham » Thu Dec 03, 2020 9:07 pm

First post

A seven passenger touring that was in the stable of the Boise Livery Co. Here in front if the Ellis Hotel, Placerville, Idaho. Date unknown.

Last post

Yes it does look like a '15,first year for the Cadillac V-8 and longest running production V-8 in the world. 15 through 17 did not have a removable cylinder head.

10 Replies

978 Views

Last post by Grizwaldo
Tue Jan 12, 2021 11:04 am
RANT: AMERICAN GREED

Last post by Bills Auto Works « Tue Jan 12, 2021 7:28 am
Replies: 25
by ModelTWoods » Sat Jan 09, 2021 12:41 pm

First post

With the problems we have in America with political division and turmoil, we have our hands, more than full. Then comes along the GREED of some Americans. America is a 'free market' economy and I know that the price a seller gets is 'whoever the market will bear', but do some sellers have 'no shame' or decency? I have always tried to sell, either...

Last post

Greed, pride, lust, envy, gluttony, wrath and sloth. The seven deadly sins.
Sloth is my favorite.

Cute, laid back & star of many hilarious memes....What's not to like! :lol:

God Bless
Bill

25 Replies

1315 Views

Last post by Bills Auto Works
Tue Jan 12, 2021 7:28 am
Some members of my household are difficult to shop for.

Last post by Kaiser « Sat Jan 09, 2021 6:23 am
Replies: 12
by WayneJ » Thu Dec 17, 2020 11:08 am

First post

20201217_092739.jpg

Happy Holidays Everyone!

Last post

It doesn't matter how nice a basket you make for them, they always find your favorite spot the best...

12 Replies

1234 Views

Last post by Kaiser
Sat Jan 09, 2021 6:23 am
Not Ford men !

Last post by Kaiser « Sat Jan 09, 2021 6:11 am
Replies: 5
by Rich Bingham » Fri Jan 08, 2021 11:31 am

First post

Here's a fun picture. Not Fords (not Russia either :D ) probably mid-teens ?
Can anyone identify the cars in their stable ?

W. S. Jenkins & Sons established the Moscow Livery Stable, made the transition into the motor age and remained in business. I imagine there were many that did as well.

Last post

A 1902 Percheron on the left and two 1889 Nags in front of the stable doors 😂

5 Replies

528 Views

Last post by Kaiser
Sat Jan 09, 2021 6:11 am
The Visit of George - A Morris Cowley Tale

Last post by perry kete « Fri Jan 08, 2021 5:58 pm
Replies: 1
by A Whiteman » Fri Jan 08, 2021 3:42 pm

First post

Christmas in New Zealand is summer time, time for the BBQ, gatherings and family holidays. This year the holidays have been domestically focused. No shooting off to Fiji for a week or the Gold Coast for a few days. As a result many ‘Kiwis’ have been discovering the beauty and spectacular landscapes quite literally at our own back door.

A benefit...

Last post

What a very enjoyable story, thanks for sharing.

1 Replies

292 Views

Last post by perry kete
Fri Jan 08, 2021 5:58 pm
Old sign

Last post by Herb Iffrig « Mon Jan 04, 2021 11:09 am
Replies: 2
by Billdizer,Spencer In » Sat Jan 02, 2021 7:57 am

First post

This time of the year, lots of people are looking for an old sign to Langs! Yes, an old Langs sign! hint say the last three words together! Now do you get it?

Last post

Lang.JPG[/attachmen

Is this the old Lang's sign you are talking about?

2 Replies

540 Views

Last post by Herb Iffrig
Mon Jan 04, 2021 11:09 am
Has anyone converted Carbide Headlights to electric ?

Last post by OilyBill « Sun Jan 03, 2021 11:39 pm
Replies: 3
by PDGx » Wed Dec 02, 2020 7:16 pm

First post

Anyone have experience with these gas burner to electric headlight conversions ?
(Langes)

C32383BC-126C-4073-8C46-B75EB8318FCF.jpeg

Last post

Thanks for the info! I am looking at doing that for my 1914 Runabout. Looks like they work very nicely!

3 Replies

482 Views

Last post by OilyBill
Sun Jan 03, 2021 11:39 pm
Music and and model T

Last post by dlmyers « Sun Jan 03, 2021 8:06 am
Replies: 1
by JohnM » Sat Jan 02, 2021 10:26 pm

First post

I love how model T's and acoustic music fit together. I know there is Stan and Mark, and others on this forum, who play and love Americana music. This would be my sound track to a T video. Part Aaron Copland, part celtic, part bluegrass. Please add your favorites. Enjoy.

Last post

My favorite is on “Katie Across The Nation day 1”

I would like to know more about this song. Title, artist or anything.

1 Replies

302 Views

Last post by dlmyers
Sun Jan 03, 2021 8:06 am
Where to get an 8 volt battery load tester

Last post by Novice « Thu Dec 31, 2020 1:47 pm
Replies: 6
by jiminbartow » Sun Nov 01, 2020 11:48 pm

First post

I have a 48 volt electric 2012 Precedent Club Car golf cart with six brand new Trojan 8 volt batteries. I need an 8 volt battery load tester with which to periodically check the condition of the batteries. Does anyone know where I can find one of these? I have been looking online for several days and cannot find one anywhere. All the ones for sale...

Last post

LOOKS GOOD. e-bay has everything! And now if You decide to put a 8 volt battery in Your model T for a little extra starting power. You have a tester to check it.

6 Replies

579 Views

Last post by Novice
Thu Dec 31, 2020 1:47 pm
A different mode of transportation

Last post by Rich Eagle « Tue Dec 29, 2020 1:44 pm
Replies: 11
by Rich Bingham » Sun Dec 27, 2020 10:12 pm

First post

Harnessing could be stressful.

Last post

Apparently so judging from the occasional horse that climbs a tree searching for honey or the Greyhound running along to the William Tell Overture.

11 Replies

731 Views

Last post by Rich Eagle
Tue Dec 29, 2020 1:44 pm
1908 Buick

Last post by Wayne Sheldon « Fri Dec 25, 2020 5:50 am
Replies: 28
by Robert Bente » Tue Jul 07, 2020 12:25 am

First post

The HCCA site is a dead horse as far as input and thoughts on early car restorations.
I have had a lot of insight and recommendations on my last project, 1916 Buick Barn find, from my fellow T brothers and sisters.
I’m in the process, during this COVID thing, of a restoration of a 1908 Buick model G.
It weathered the Car fire 2 years ago with...

Last post

Dang you work fast!

Thank you for the update.

Happy Holidays! And a wonderful New Year.

28 Replies

3339 Views

Last post by Wayne Sheldon
Fri Dec 25, 2020 5:50 am
Custom Color Matched Exterior Enamel from Home Depot!

Last post by Mopar_man « Wed Dec 23, 2020 8:05 pm
Replies: 3
by CudaMan » Wed Dec 23, 2020 1:11 pm

First post

The chassis and undercarriage of my 1912 Flanders 20 is a rather dark, yellowish cream color and needs a lot of touch-up. I removed and cleaned up my license plate holder as best I could to use as a color reference. I could have gone to a dedicated automotive paint store, but on a whim I decided to stop by Lowe's first. They only offer color...

Last post

That's great!! When My daughter was born I asked my wife if we should paint the nursery a nice soft yellow. She agreed so I went to Home Depot with a 1967 Dodge paint chart and painted her room 67 Dodge yellow Sunfire . It came out great! They were also able to match Hemi Orange Petty Blue and Citron Yellow for my garage. Ha!!!

3 Replies

410 Views

Last post by Mopar_man
Wed Dec 23, 2020 8:05 pm
The History Guy on Carl Fisher

Last post by Duey_C « Wed Dec 23, 2020 12:44 am
Replies: 1
by otrcman » Thu Dec 17, 2020 11:39 am

First post

I wasn't sure whether this qualified for On Topic or not. So playing safe with OT.

This is a 14 minute synopsis of the life of Carl Fisher, who was a key promotor many facets of the early development of automobiles, and yet his name is hardly noticed today.

Last post

I thought that was a pretty neat video. Thanks Dick!

1 Replies

382 Views

Last post by Duey_C
Wed Dec 23, 2020 12:44 am
Larger headlight fork

Last post by PDGx « Tue Dec 22, 2020 2:32 pm
Replies: 7
by PDGx » Wed Oct 21, 2020 7:05 pm

First post

Anyone have a source for headlight forks that have an approximate 9-3/4” c-c of forks ?

The standard T size is 7-1/2”.

CDC08252-5407-4DEE-9CE7-6A2F7111EA7D.jpeg

Need a pair for a set of Corbin lights.

Last post

I think they look great!
... All that hay in the background is a lot of work too! I have never found a cool way to put it up! We mostly use round bales for the wife's two horses! Only did fifty eight square this year, on the third cutting. Merry Christmas!

Thx. We round bale our bahia for cattle, but bring good alfalfa from up north for the...

7 Replies

788 Views

Last post by PDGx
Tue Dec 22, 2020 2:32 pm
Tow truck, how they do it in Germany

Last post by Kaiser « Tue Dec 22, 2020 9:25 am
Replies: 3
by Herb Iffrig » Mon Dec 21, 2020 8:11 pm

3 Replies

524 Views

Last post by Kaiser
Tue Dec 22, 2020 9:25 am
IT SNOWED LAST NIGHT

Last post by Duey_C « Tue Dec 22, 2020 1:07 am
Replies: 2
by StevenS » Sun Dec 20, 2020 6:02 pm

First post

IT SNOWED LAST NIGHT...!

8:00 am - I made a snowman in my front yard.

8:10 - A feminist passed by and asked me why I didn't make a snowwoman.

8:15 - So, I made a snowwoman.

8:17 - My feminist neighbor complained about the snowwoman's voluptuous chest saying it objectified snowwomen everywhere.

8:20 - The gay couple living nearby threw a...

Last post

To add to that I was going to quip:
Next;
t jung walzting matilda from up here caught some wind of the punrestp down there, got in touch with his head gestapoworm mirror kiki elseiagreeasson to see if they could consider finding ya with oh so many folk on said land, charging th cannons and garnishing some doe for thereselves.
That may near be how...

2 Replies

510 Views

Last post by Duey_C
Tue Dec 22, 2020 1:07 am
Got these two out for the last time this year.

Last post by Mopar_man « Mon Dec 21, 2020 9:24 am
Replies: 3
by Mopar_man » Sun Dec 13, 2020 6:42 pm

First post

Went out to fill up the tank on these two. Both ran well after sitting for a month. The Charger is mine and the SuperBee is my wife's car.

IMG_4042.jpeg

IMG_4047.jpeg

Last post

That's a big change. My problem is I can't get rid of any cars I have. Ha! I've had my Imperial for 30 years the Charger for 21 and my wife has had the Super Bee for 17. The 26 T is the baby I've only had that one for about 3. That GTX was nice. The Flanders 20 is a cool rare car.

3 Replies

564 Views

Last post by Mopar_man
Mon Dec 21, 2020 9:24 am
Car Light Or?

Last post by Mark Gregush « Sat Dec 19, 2020 10:46 pm
Replies: 5
by GEmering » Fri Dec 18, 2020 11:49 pm

First post

I was given this light by a friend who thought it might be auto related. There is no makers mark on the lamp.
Any information is appreciated.

Gene

Last post

The cap holds the candle in place and as it burns a spring in the tube pushes it up.

5 Replies

566 Views

Last post by Mark Gregush
Sat Dec 19, 2020 10:46 pm
1969 Renault 16 parts

Last post by DLodge « Sat Dec 19, 2020 1:14 pm
Replies: 3
by Afrazer » Fri Dec 18, 2020 9:52 pm

First post

Does anyone in the U.S. have a place to buy new replacement parts for a 1969 Renault 16. My dads car had a wiring issue, we have an old one that might be usable but I’d rather find him a new better quality replacement if possible.

Last post

A number of the hits I got were people who deal in vintage Renault parts. Also got some hits for Renault clubs, who may also have some tips.

3 Replies

360 Views

Last post by DLodge
Sat Dec 19, 2020 1:14 pm
My T hauler is finished.Almost.

Last post by tdump « Tue Dec 15, 2020 10:46 pm
Replies: 15
by tdump » Mon Dec 02, 2019 4:33 pm

First post

Is any shop project ever really done ? Nope.Still got to install more floor tie downs and a winch and mount for it.
BUT so you folks won't think I have curled up in a Lazy Boy and become a key board Curmudgen, here is what I have been working on for hauling the T pickup.
I built this from scratch. I had the basic frame put together,no ramp or...

Last post

Well a update,
Here is my refurbished Tandem trailer.I bought this trailer back in about 2006 or 7. Paid to much for it.The floor rotted out of it about 2013 or 4 and last I used it the tractor front wheel fell thru the floor.It had hydrolic brakes on it,the master cylinder was full of rust and such,tires had dry rotted, it was useless.It sat till...

15 Replies

3378 Views

Last post by tdump
Tue Dec 15, 2020 10:46 pm
Your oldest favorite chainsaw?

Last post by Grady Puryear « Tue Dec 15, 2020 10:10 am
Replies: 5
by Billdizer,Spencer In » Mon Dec 07, 2020 8:51 pm

First post

What's you oldest favorite, or maybe least favorite chainsaw? I just got my old Echo cs602vl running again, after several years of rest. I've owned it since the late seventies, and cut a lot of firewood with it! It suffered a melted piston after the fuel filter plugged up on it, and ran it too lean. This was 8-10 years ago, and I bought a good...

Last post

Until a few years ago, I had two POULAN? chain saws, gave them away to a friend, still kicking my butt. :oops: :oops: I ran upon these years ago up in the Rockies, at the time one could find stuff like this that some poor Logger had for sale when he had ran out of work. One was triangular in shape, and it was BIG. The old boy I got it from said...

5 Replies

610 Views

Last post by Grady Puryear
Tue Dec 15, 2020 10:10 am
Mechanics at work-Old Photos

Last post by John Warren « Mon Dec 14, 2020 7:11 pm
Replies: 17
by Herb Iffrig » Wed Nov 25, 2020 5:46 pm

First post

I think it is a fun thing to look into some of these old garages. Some of the photos I will put up have been posted before, but I will try to congregate them here. mechanic and car.JPG mechanics and car shop.JPG mechanics and a car2.JPG mechanics and cars.JPG tire shop mechanics.JPG

Last post

service machine shop.jpg

17 Replies

1338 Views

Last post by John Warren
Mon Dec 14, 2020 7:11 pm
I Fear We're All Out of Date

Last post by Loftfield « Sun Dec 13, 2020 7:18 am
Replies: 13
by HPetrino » Sat Nov 21, 2020 11:47 am

First post

Occasionally on Saturday mornings while I'm at my desk doing stuff I'll put on Hopalong Cassidy. There is a cable channel here that plays 2 of his early 1950's TV episodes then 1 of his movies every Saturday morning. I enjoy the simple good guy always wins theme. It's a short, pleasant break from the news and realities of todays troubled world....

Last post

Back when it was current, I wrote to ask what kemo sabe meant. The answer I got was that it meant absolutely nothing, It was only a word invented for Tonto to call the Lone Ranger. No cultural group need be offended.

13 Replies

1027 Views

Last post by Loftfield
Sun Dec 13, 2020 7:18 am
For the Record - An Objection

Last post by tdump « Sat Dec 12, 2020 5:27 pm
Replies: 18
by HPetrino » Sat Dec 05, 2020 5:09 pm

First post

The OT thread about the recent election has been removed. I have just read and re-read the Forum Rules. I could find nothing in those rules that would warrant removing that thread. Just because one person didn't like the fact that it had political content is not sufficient reason to stifle civil, legitimate, rule compliant, and stimulating...

Last post

I must have missed something!
But 1 thing I have learned lately, depending on your leanings in regards to certian things as to how many places you are welcome to talk about politics and religion.
Smoke and Flames,yep,I have lit a fire or 2 there.

18 Replies

1482 Views

Last post by tdump
Sat Dec 12, 2020 5:27 pm
Why wooden spoked wheels and not steel?

Last post by dmdeaton « Wed Dec 09, 2020 8:21 pm
Replies: 19
by Fordwright » Tue Oct 13, 2020 3:18 pm

First post

It must have occurred to someone that a pressed steel rim was better than the wooden spoked wheel in those days. I don't buy the argument that wood was lighter, because the vanadium steel at the time could have made a wheel as thin and strong enough to achieve the desired weight. Was it simply that back in the day, a wheelmaker only made wheels in...

Last post

So 26 was the year of the wires from what I read. I saw pics of a recent red 26 roadster pickup that sold in the sale threads with wood spokes. What is needed to put a set of these together for a 26/27? Large drums for rear I assume.

19 Replies

1530 Views

Last post by dmdeaton
Wed Dec 09, 2020 8:21 pm
Hershey

Last post by Mark Gregush « Tue Dec 08, 2020 7:11 pm
Replies: 3
by dmdeaton » Tue Dec 08, 2020 5:17 pm

First post

Are we going to be able to go this fall?

Last post

The people to ask would be the ones that run it. I suggest going to their web site and send an email.

3 Replies

430 Views

Last post by Mark Gregush
Tue Dec 08, 2020 7:11 pm
"Pretty far-fetched" and stuff

Last post by Dan Haynes « Sat Dec 05, 2020 9:11 pm
Replies: 71
by DLodge » Sat Aug 29, 2020 12:01 pm

First post

In the Stutzman thread on the General Discussion forum, Steve Jelf made the comment that something was pretty far-fetched. My grandfather often used the expression (generally in response to something I had told him). I still use it occasionally, but probably not as often as it was used in days past. Is far-fetched going the way of Model Ts and oil...

Last post

Fig1_1.png

71 Replies

3887 Views

Last post by Dan Haynes
Sat Dec 05, 2020 9:11 pm
Special $300 Tax Deduction for 2020 Charitable Cause

Last post by hossross « Fri Dec 04, 2020 10:36 pm

by hossross » Fri Dec 04, 2020 10:36 pm

Many of you may not know that the CARES Act, the huge spending bill passed by Congress in March to provide Coronavirus Aid, ALSO allows for a $300 tax deduction on your 2020 Taxes, IF you only claim the STANDARD DEDUCTION. (ie: you get both this charity deduction and the standard deduction. Usually if you don't itemized your deductions. there are...

0 Replies

312 Views

Last post by hossross
Fri Dec 04, 2020 10:36 pm
Another White for Rich Eagle

Last post by Rich Bingham « Fri Dec 04, 2020 3:22 pm
Replies: 9
by Rich Bingham » Tue Dec 01, 2020 6:39 pm

First post

No dates or details were given, other than this is CC Boswell, and his trusty White, stage driver from Grangeville to New Meadows (Idaho) for a number of years. The beast regularly negotiated Whitebird Pass. What power !

Last post

Either one looks mighty elegant ! :D

9 Replies

712 Views

Last post by Rich Bingham
Fri Dec 04, 2020 3:22 pm
FJ - Flat Rate Mechanic For Light Diesel & Gas Automotive Needed In Winslow, Arizona

Last post by FreighTer Jim « Wed Dec 02, 2020 2:42 pm

by FreighTer Jim » Wed Dec 02, 2020 2:42 pm

Please Share If You Know A Mechanic

Flat Rate Light Diesel & Gas Automobile
Mechanic Needed in Winslow, Arizona
On Site Full RV Hookup Available
Owner Is ASE Certified Mechanic
Immediate Steady Employment
40 miles to Flagstaff, Arizona 👍

Call or Text Jim @ 260-804-6695

9315F9D8-4B07-4AD6-B7D0-2D1DF42CFEB5.jpeg...

0 Replies

298 Views

Last post by FreighTer Jim
Wed Dec 02, 2020 2:42 pm
OT - Good Deal on Model A Tudor on Craigslist

Last post by Rich Eagle « Tue Dec 01, 2020 1:45 pm
Replies: 1
by CudaMan » Tue Dec 01, 2020 8:58 am

First post

Saw this on Craigslist this morning, looks like a great deal for somebody.

Last post

Thanks for the peek Mark. It is so much like the one I owned from 1962 until 1978. We sold it for a down payment on a home with shop and room to build a storage garage. It was a great first car and taught me well for owning T's. While I don't regret selling it, this one reminds me of the wonderful times.
It looks like a great car for somebody.
You...

1 Replies

360 Views

Last post by Rich Eagle
Tue Dec 01, 2020 1:45 pm
A new day has arrived

Last post by Norman Kling « Sun Nov 29, 2020 7:19 pm
Replies: 9
by ModelT46 » Sun Nov 08, 2020 1:48 pm

First post

It is as if a heavy weight has been lifted-from the shoulders of America,
it is as if the Sun shines again after a long period of darkness,

It is as if a warm rain falls after a long drought,

it is as if a warm breeze blows by after a cold wind goes away,

now America can awake after a long sleep to a new day and a better future.

Darel 2020

Last post

We can remember the past, and we can experience today, however, for centuries people who make predictions for the future have been wrong. No one knows what will happen until it happens.
We can all do our best today and when we have an opportunity to serve in some way, whether it be military, or medical, or consumer goods, or retail, or the trades...

9 Replies

1243 Views

Last post by Norman Kling
Sun Nov 29, 2020 7:19 pm
Tree hugger

Last post by John Warren « Sun Nov 29, 2020 11:02 am
Replies: 34
by perry kete » Wed Oct 28, 2020 3:04 pm

First post

electric cars.jpg

Last post

My last comment was in gest!!! we have a much larger problem that we can't do anything about. Probably won't see much in our lifetime though! Thanks and agree.

34 Replies

2288 Views

Last post by John Warren
Sun Nov 29, 2020 11:02 am
Our 2 wheel friends

Last post by Kevin Pharis « Wed Nov 25, 2020 11:13 pm
Replies: 8
by Dollisdad » Mon Nov 23, 2020 4:03 pm

First post

04C78928-D0F7-4119-BBC1-FCEFD8B81BD1.jpeg 7F16337B-B29C-4F12-ACFC-F693282DC499.jpeg 2BA0D5F8-48CC-4DF7-BA18-6C904D0ED56D.jpeg 586218BB-812E-45B6-AD44-790B5C57134A.jpeg

Last post

WOW!!!!! She’s a beauty Craig!

I know what I want for Christmas now...😉

8 Replies

734 Views

Last post by Kevin Pharis
Wed Nov 25, 2020 11:13 pm
"Days of Blunder"

Last post by John Warren « Mon Nov 23, 2020 2:34 pm
Replies: 1
by Marv K » Mon Nov 23, 2020 2:10 pm

First post

Found this interesting story with my daily Sports Illustrated. Supposedly the first car race.

Last post

I would love to have the article-s, love history like this. Thanks

1 Replies

391 Views

Last post by John Warren
Mon Nov 23, 2020 2:34 pm
1920 Cleveland six model 40

Last post by John Warren « Mon Nov 23, 2020 2:25 pm
Replies: 10
by Michael Peternell » Fri Oct 23, 2020 9:58 pm

First post

I got a pair of them a few years back. A bit rough. IMG_20161113_142918256.jpg IMG_20170101_085616.jpg 11109.jpeg
Three parts engines later and a great friend l have this.

Last post

Lookin good Mike!!

10 Replies

1051 Views

Last post by John Warren
Mon Nov 23, 2020 2:25 pm

New Topic

615 topics

Page 1 of 7
- Jump to page:
1
2
3
4
5
…
7
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum